Advanced materials research : selected, peer reviewed papers from the 2011 International Conference on Advanced Material Research (ICAMR 2011), January 21-23, 2011, Chongqing, China
Author(s)
Bibliographic Information
Advanced materials research : selected, peer reviewed papers from the 2011 International Conference on Advanced Material Research (ICAMR 2011), January 21-23, 2011, Chongqing, China
（Advanced materials research, v. 213）
Trans Tech Publications, c2011
- : pbk.
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
These proceedings comprise the refereed papers presented at the International Conference on Advanced Material Research (ICAMR 2011) held on January 21 - 23, 2011 in Chongqing, China. The main goal of this, and other events, was to provide an international scientific forum for the exchange of new ideas in a number of fields via in-depth discussions with peers from around the world. Both inward research; core areas of advanced materials research and outward research; multi-disciplinary, inter-disciplinary research and applications were covered; thus providing a thorough overview of the subject.
Table of Contents
Preface and Organizing Committee
Photocatalytic Degradation of C.I. Reactive Red 2 on the Mixture of TiO2 and HZSM-5 Zeolite
Microstructure and Mechanical Properties of Lost Foam Casting AZ91D Alloy Produced with Mechanical Vibration
Research of Process Planning Based on Similarity Theory under Reconfigurable Manufacturing System
Photoelectrocatalytic Degradation of Methyl Orange on Porous TiO2 Film Electrode in NaCl Solution
Photocatalytic Activity of TiO2-HZSM-5 Composite for C.I. Reactive Red 2 Degradation
Manufacturing of Biocompatible Implant Component Using Rapid Prototyping Technology
Study on the Effect of Waste Gypsum on Hardening Paste Structure and Performances of Lime-Fly Ash
Performance Assessment of Photocatalyst for Ethanol Removal
Performance Study of SMPS and FDMA for Nanometer Aerosol Particle Measurements
Kinematic Analysis and Simulation of the Translational Parallel Mechanism
A Study of Mixed Media Creative Artwork Designed with Computer Software
A Design Research of Plastic Cup Modeling Using Simulation with 3ds Max
Optimization of High Performance Engineering Plastics in Thin Wall Part Injection Molding
Photocatalytic Degradation of Methyl Orange on the Composite of TiO2 and Lanthanum Niobate
Analysis for Diving Regulator of Manufacturing Process
Study on the Reuse of Production Wastewater with Submerged Ultrafiltration Membrane
Esterification of Polypropylene Fiber and its Adsorption of Phthalate Esters
The Refined Analysis about Mechanical Behavior for Torsional Circular Shaft of Cubic Quasicrystal
Numerical Simulation on Bending Characteristics of Aluminium Foam Filled Thin-Walled Tubes
Demonstration of Modification from AlF3 Re-Deposition to Polymer Re-Deposition on Air Bearing Surface (ABS) Etched Sidewall of Fluorine-Based Plasma Etch on Al2O3-TiC Substrate
Fabrication and Gas-Sensing Characterization of Molybdenum Oxide Nanostructure by Reactive RF Sputtering
Improvement of Hydrophilic Properties on Electrospun Polyacrylonitrile Fabrics Surface by Plasma Treatment
High Speed Rail: Review on the Regional Impact and Economy Development
Modeling and Analysis of Effect of Thermal Exposure on Fatigue Crack Growth of Al-Cu-Mg Alloys with Low Cu/Mg Ratio
Development of Processing Maps for DC Cast Modified and Unmodified Hypereutectic Al-Si Alloys
Resistance Measurements in Conductive Fabrics
Pathway and Kinetic of Dechlorination of Trichloroethylene in Water by Supported Nanoscale Bimetallic Fe-Cu Particles
State-of-Art Technology ALLVAC 718 Plus Superalloy for Gas Turbine Engine Parts
The Influence of Preheating on Automated Fiber Placement Speed
Effect of Annealing Temperature on Deformed Microstructure of Low Carbon Martensite
The Direct Oxidation of CO on the Highly Active Pt-Skin Pt3Ni(111) Surface: a First Principles Study
Characteristics of Visible-Light Enabled TiO2/ITO Films
EDS, XRD and Raman Scattering Study of Dy Ion Implanted CdTe Polycrystalline Thin Films
Base Pressure Effects on the Structure, Surface Roughness and Electrical Resistivity of Mo Thin Films by RF Magnetron Sputtering
The Adsorption Properties of Cu and Ni on the Ceria(111) Surface
A Study of Mixed Media Art Creation for Children's Picture Books
A Study of Creative Artworks of Picture Books with Tableware Colored Using Mixed Media
Applied Design and Research of RFID for Sports Competitions
Numerical Simulation on Mechanical Properties of SiC/Al Co-Continuous Composites
A Study of Logo Design for Products Marketed Online Using Computer Graphing Software
Water Distribution System Modeling and Simulation
Effects of Asperity Shape on the Adhesion Hysteresis Originated from Surface Roughness
The General Solution for Torsional Circular Shaft of Cubic Quasicrystal
An Integrated Multimedia Learning System for Reciprocating Internal Combustion Engines: RICEM
Project of High-Speed Railway and Sustainable Development Evaluating
Shell Body Nose Forming by Rotary Swaging Process
Integrated Scheduling Algorithm with Setup Time
The Multi-Objective Optimization Design of Leaf Spring of few Piece Variable Cross-Section
An Improved Routing Algorithm in Intermittently Connected Sensor Networks
A Stress and Strain Analytical Formula Applied in Low Alloy and High Strengthen Steel Material
Effect of Sm2O3 on the Electrical Properties of TiO2-Ta2O5-Based Capacitor-Varistor Ceramics
Dry Sliding Tribological Behavior of Continuous Ceramic Frames Reinforced Aluminum-Based Composites
Epipolar Geometry Estimation Using Improved LO-RANSAC
Air Flow in Large Space Building with CFD Model and Local Test
Structure and Compressive Properties of Silver Foams with Various Porosities
Influence of Substrate Material on Tensile Behavior and Fracture Characteristics of SiC by Chemical Vapour Deposition
The Exact Deformation Theory of Two-Dimensional Dodecagonal Quasicrystal Shaft
Effect of L/D Ratio on Al-Si Functionally Graded Material Cast through Centrifuge Technique
Two Ash Stability Coal Stone Basic Levels Are in the Express Line of PingDingShan City of Application and the Technique Economy Analysis
Automatic Ultrasonic Inspection Method of Railway Axle and its Remaining Life Prediction
Defect Inspection and Classification of CFRP with Complex Surface by Ultrasonic
Discussion about Calculation Principle of Carbon Emission in Low-Carbon Architectures
Biomechanical Numerical Simulation of Bone Tissue Engineering Scaffolds
The Influence of Air Humidity on Fatigue Properties of an AA2524-T34 Aluminum Alloy
Implementation of W-CDMA System Based on IP Functions
Characteristics of Rotary Draw-Bent Tubes for the Hydroforming
Preparation and Modification MnZn Ferrite Thin Films under Swift Heavy Ion (SHI) Irradiation
Study on the Effect of Fe3O4 Nanoparticle Dopants on the Properties of Magneto Optical Glasses
Trim Optimizations of an Adaptive Tailless Aircraft with Composite Wing
Numerical Simulation of Residual Stress Distribution Produced by Shot Peening
Convolution PHD Filtering for Nonlinear Non-Gaussian Models
Marginal Design Evaluation for CAM Obtained Zirconia Based Crown Frameworks
Ethylene Polymerization by Thioether Bridged Dinuclear Titanocene Complex
Parametric Simulation Modeling Approach for Mobilization Production Plan
Resolution and Analysis for Quasi-Stable Frost Forming Model
Modeling and Decoupling Control of Grid-Connected Voltage Source Inverter for Wind Energy Applications
Ethylene Polymerization by Thioether Bridged Dinuclear Zirconocene Complex
Unequal Deformation Characteristics of In-Plane Roll-Bending of Strip with Considering Spread Effects
A Multi-Objective Optimization Method for Thin-Walled Tube NC Bending
GetCM: A Vision of Cloud Manufacturing
A New Numerical Method for the Riesz Space Fractional Diffusion Equation
The Investigation of Conformational Change and Water Permeability of Poly(acrylic Acid)-Graft-Polypropylene Membrane in Cross-Flow Microfiltration
Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6Al-4V Using Response Surface Method
Study on Mechanical Properties of New Type Chain Concrete Blocks with Ecological Function
Influence of Electromagnetic Stirring Parameters and Isothermal Extruding on Semi-Solid Forming Performance of ZA27 Alloys
Linear Static Response of Suspension Arm Based on Artificial Neural Network Technique
Production of Activated Carbon from Ligin: Optimization Using Response Surface Methodology
Biosorption of C. I. Reactive Red 2 by Immobilized Fungal Biomass
The Effect of Heat Treatment Temperature on Property and Structure of Ni Group Core-Shell Particles ER
Application of Imprinted Functionalized Silica Gel Sorbent for Selective Removal of Cadmium (II) from Industial Wastewaters
Analysis of Influence Factors on Anti-Rutting Performance of Fiber Asphalt Mastic and Fiber Asphalt Mixture
Manufacturing Process Planning to Evaluation on Failure Causes for Lithography Machine: Analytic Hierarchy Process
Using Data Envelopment Analysis to Measurement Patent Performance of Medical Instruments Industry
Preparation of Steel Slag Adsorbent and its Removal Phenol Property
Determinition of Optimal Coiling Temperature and Cold Reduction Ratio of Adding P High Strength if Steel
Morphology of High-Pressure Crystallized Poly (Ethylene Terephthalate)/Bisphenol-A Polycarbonate Blends
GC/MS Analysis on Benzene/Alcohol Extractives of Manglietia Glauca Leavies for Biomedicine Engineering
The Mechanical Feature and Dependence of the pH-Sensitive Hydrogel
First Principles Calculation of Geometrical and Electronic Structure of Semiconductor Fe1-xMnxSi2
Friction Effect in Hot Rolling of Large Rings with Different Sizes
The Creep Behaviour of Extruded Mg-5Li-3Al-1.5Zn-2RE Alloy
Effect of Heat Treatments on the Bio-Corrosion Resistance of Magnesium Alloy Mg-8.0Al-1.0Zn-xGd
Kinetic Analysis of Thermal Decomposition of Epoxy Resin/Polyaniline Nanocomposites
Isomerization of -Pinene Catalyzed by Polyaniline with Different Morphologies
The Determination of Prestress for Reinforced Concrete Pipes Based on Elasticity
Effect of Different Silicon Sources on CO2 Absorption Properties of Li4SiO4 at High Temperature
Simulation of Temperature Field in Selective Laser Sintering on PA6/Cu Composite Powders
Microstructure and Wear Resistance of Cu-TiC Composites Fabricated by Mechanical Alloying and Spark Plasma Sintering
Study of Strain and Temperature Simultaneous Measurement Technology Based on Sampled Grating
The Synthesis and Characteristic Properties of Poly (AAc-Co-AAm)
Improvement of a Novel MEMS Bionic Vector Hydrophone
Effects of Plasma Nitriding on Low Temperature Salt-Bath Chromizing of W18Cr4V Steel
Experimental Study on RC Beams Strengthened with CFRP Sheets
A Effects of Polyaniline Morphologies on Performance for Removal Rhodamine B
Method and Application of Multistage Machining Quality Control Based on Minimum Overall Mean Quality Loss
Catalyst Study for Carbon Nanotubes Synthesis by Flame
Fuzz Modeling and Evaluation on the Reliability of Coal Mine Ventilation System
Effects of Temperature for Carbon Nanotubes Synthesis
Weft Knitted Pattern Designing Based on the Wave Filter
Study on Photo-Electro-Chemical Catalytic Degradation of Reactive Brilliant Red X-3B
A First-Principles Study of Hydrogen Molecules Adsorption on Graphene
Design of Material Management System for Small-and-Medium-Sized Garment Enterprises
Study on Three-Dimension Computer Simulation of Plain Knitted Fabrics
Determination of Austenite Grain Coarsening Temperature of a Nb-Microalloyed Steel Sheet
A New Method for BOM Modeling
Experimental Research on the Normal Absorption Coefficient of the Multilayer Material
The Optimized Design for Groove Parameters Based on Cement Pavement Materials Performance
Industrial Diversification and Regional Development Stability: Theoretical Discussion
Flow Stress Constitutive Equation of Age Hardening Cu-1.1Cr Alloy during Hot Compression Deformation
Computer-Aided Design and Fabrication of Bio-Mimetic Materials and Scaffold Micro-Structures
Study on Bonding Performance of Interlayer Materials between Old Cement Slab and Asphalt Overlay
A Multi-Dimension Configuration Method of Modular Machine Tools Based on Customer Requirements-Driven
A Method of Obtaining Gray Balance Data Based on Polynomial Regression
Design and Implementation of Boot Loader Based on Embedded System Platform
by "Nielsen BookData"
