Machinery, materials science and engineering applications : selected, peer reviewed papers from the 2011 International Academic Conference on Machinery Materials Science and Engineering Applications (MMSE 2011), July 15-16, 2011, Wuhan, China
Author(s)
Bibliographic Information
Machinery, materials science and engineering applications : selected, peer reviewed papers from the 2011 International Academic Conference on Machinery Materials Science and Engineering Applications (MMSE 2011), July 15-16, 2011, Wuhan, China
（Advanced materials research, v. 228-229）
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
Tokyo Institute of Technology Ookayama Library
Part 1A25118/228400040141,
Part 2A25118/22840004015X -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The purpose of this special collection was to strengthen national academic exchanges and cooperation in the field, to promote the rapid development of machinery, materials science and engineering applications, to improve China's machinery, materials science and engineering in the sense of academic status and international influence and to play an active role in reducing the distance between domestic and world-class norms. In accomplishing this, the present book succeeds admirably.
Table of Contents
Preface and Committees
Development of New Patching Materials for Bridge and Tunnel Structures
Dynamic Mechanical Properties of Porous Rock under Impact Loading
A Decision Making Methodology to Divide Virtualized Resources Morphologies
Research and Development of Intelligent Design System for Machine Tool Fixture Based on KBE
Low Temperature Anti-Cracking Performance of Brucite-Fiber-Reinforced Asphalt Concrete
The Light-Sensitive Character of WO3 Nanorods Synthesized by the Hydrothermal Method
Preparation of Spherical NiO Nanoparticles by the Thermal Decomposition of NiC2O4 2H2O Precursor in the Air
Development of a Robotic System to Examine Outer Cylinder of Pipes in Steam Generators
Phase Field Simulation of Parameters Affecting Dendrite Growth in a Forced Flow
The Identification Analysis for Macro Distributions Curves of Functionally Graded Materials Properties Based on Materials Components
The Meshing Property Analysis of the New Sine Gears
A New Computational Model about Vehicle's Sliding Resistance Coefficients
Design of Special Fixture for Micro High Speed Motorized Spindle
Microstructure Characteristics in Continuous Cooling Transformation of an Nb Microalloyed Steel
Comparative Study of Structure and Pickling Characteristics of Oxide Scale Formed on Strips Produced by TSCR and Conventional Process
Curing Behavior and Thermal Properties of Me-SSQ/Cyanate Ester Resin Organic-Inorganic Hybrids
Simulation of Compound Bulging Process for T-Branch Tubes Using Rubber Medium
Study on Topology Optimum Design of Baffle of Scraper Conveyer
Behavior of Cr-Rich Phase during Rapid Solidification Cu71Cr29 Alloys
Spiral Involutes and its Application in Gear Transmission
Plasma Carburizing and Post-Treatment of Austenitic Stainless Steel
Improvement of Hood Hinge Based on Protection of Pedestrian Head
Dynamic Model and Experimental Research on Pitch Mechanism of Gun with Clearances
Characterization of Surface Composition and Microstructure of H21 Steel Implanted Using Masking Ti-Implantation
Electronic Structure and Chemical Bond of TiB2-Al2O3 Composite
Weakening Hydrogen Bond of Thick Oil of Petroleum by Several Catalysts
Prediction Model of Solidification Structure for Electroslag Remelting Slab Ingot
Stability Analysis for Descriptor Neutral Systems with Mixed Delays
Module Design Based on Life Cycle Design
The Willing for Companies to Build the Logistics Cost Control System of Supply Chain and its Influence Factors
Airfoil Design and Numerical Analysis for Morphing Wing Structure
Finite Element Analysis of Rotary Kiln Cylinder
On the Transitive Closure over Distributive Lattices
The Research of Virtual Tactile Design Application in Dongba Sculpture
Research on Doubly-Fed Induction Machine Speed Control System in Marine
The Loading Analysis and Strength Calculation for Slide Block Universal Spindle
Performance Research on the Axial Flow Fan Adding Guide Vane
Experimental Study of Critical Quality in Vertical Narrow Annular Channels
Classical-Quantum Correspondence in Two-Dimensional Nanomaterials
Experimental Study on Running-In Criterion of Remanufacturing Gasoline Engine in Acceptance Test
Kinetic Analysis of Planetary Gear Box
Three-Dimensional Dynamic FEM Simulation of Block Temperature Distribution for Fusion Welding Rapid Manufacture Process
Design of Limb of 2R2T 4-DoF Symmetrical Parallel Manipulators
Stability of Asphalt Binder and Asphalt Mixture Modified by Polyacrylonitrile Fibers
Thinking about the Theory Construction of Chinese Industrial Design
Colloidal Polystyrene-Carbon Nanotubes as Water-Based Lubricant Additive
Finite Element Analysis of X-Cor Sandwich's Compressive Modulus
The Research of Trajectory Software Design Based on Cruise Missile
Numerical Simulation of PC Steel Bar Induction Heating Process
The Weight Distribution and Configurability of Process Collaboration
Submicron Tungsten Powder Prepared through the Circulatory Oxidization-Reduction Method
The Hydrothermal Synthesis of Nano-YSZ Crystallite and the Preparation of YSZ Electrolyte Film for SOFC
An Integration Method for Rolling Bearing Fault Diagnosis
A Review of Research about Variable Intake Manifold
Mechanical Behavior and Constitutive Equation of Concrete under High-Temperature Dynamical Conditions
Micro-Ploughing Process of Copper Current Collector for Lithium-Ion Battery
Birch Carbonization Surface Micrograph and Element Analyses
Study on Lubrication Properties of Emulsion for Aluminum Cold-Rolling
The Study of Combination Model Forecasting of Dynamic Traffic Volumes Based on MATLAB
Simulation Research on the Influence of Oil Damping to the Effect of Assimilating Impulsion Based on Accumulator
Design of New Excavator with Telescopic Arm
Predicting Fracture Toughness of Three-Point Bending Specimen from Tensile Test Based on Micro-Plastic Damage Model
A Discussion and Economic Analysis of Oxygen-Enriched Combustion Technology in Metallurgic Furnace
A Quantitative Analysis of the Residual Stress and Grain Size Gradient Effects on the Energy Release Rate of a Coating-Substrate System
Semi-Active Landing Gear with MR Fluid Damper Based on ADAMS&MATLAB Co-Simulation
Ergonomics Analysis Thinking of the Operation Domain Design of Workover Machines
Scheme Research of Mould Opening Degree Auto-Detecting Device
Electrical- Magnetic Transport and Magnetoresistance in La 0.7 Ca 0.3 MnO3/BN Composites
Robot Based Manufacturing Technology of Cast-Steel Joints of Sunny Valley at Shanghai World Expo Axis
Simulation Experiments on Two-Phase Flows in Shaking Ladle
A Brief Analysis on Characteristics and Ideas of the Design of New-Type LED Domestic Lamps
Direct Interpolation of Tool Orientation in 5-Axis Milling
Research of Produt Design on the Basis of DNA Theory
Numerical Simulation and Process Optimization of the Die Forging for the Center Wedge of the Railway Freight Car Buffers
Numerical Simulation on Rapidly Solidified Melt Spinning CuFe10 Alloys
The Product System Design under the Guidance of the Principle of Semantics
Lap Joint Properties of FSBRed Dissimilar Metals AZ31 Mg Alloy and DP600 High-Strength Steel with Various Parameters
The Three-Dimensional Parametric Model and Interface Designing of Involute Spline Broach
Hydraulic Fault Diagnosis Expert System of Excavator Based on Fault Tree
Fuzzy Logical Control Algorithm Based on Engine on/off State Switch for Hybrid Hydraulic Excavator
Study on Precision Cutting Titanium Alloy Thin-Walled Parts Based on Finite Element Method
Study on the Critical Cutting Thickness and the Precision Cutting Experiments of Isotropic Pyrolyric Graphite
Stability Analysis for Discrete-Time Stochastic Neural Networks with Mixed Time Delays via Delay-Paritioning
The Stress Analysis of Different Circular Saw Structures during Cutting
The Analysis of Dynamic Characteristics in Reduction of the Circular Saw Idling Noise
The Mechanical Analysis of the Composite Reinforced Circular Saw Blade
Numerical Simulation of Transport Characteristics of Porous Metal Fiber Sintered Felts Used in Microreactor for Hydrogen Energy
Effect of Ruthenium on the Performance of Iron-Based Catalyst for CO Hydrogenation
Study on Mechanism of Laser Thermal Damage on Piston
Control of Yield Ratio Based on Ultra Fast Cooling and Mechanical Behaviors of High Strength Aseismic Steel
Study on the Electrical Arc Ablation Performance of Nano-SiCW Reinforced Cu-Matrix Composites
Enhanced Performance of ZnO-Coated LiNi0.5Mn1.5 O4 Cathode Materials for Li-Ion Battery
Research on Group Decision-Making Optimization Model of Urban Railway Traffic Network Scheme
Coupling Effect Analysis of 3D Interior Structural-Acoustic Problems Using Wave Based Method
LFC Mold Development of Complex Parts with Free-Form Surface
Synthesis and Structures Characterization of Nano NiO by PDCG Technology
The Application of Moldflow in Injection Mold Design of Mobile Phone Cover
Microstructures and Properties of Tungsten Carbide Particle-Reinforced Composites Fabricated by Overlaying Welding with Flux-Cored Wire
The Present Situation of EMS and Solutions to its Difficulty
A Micro-Machined Ceramic Hot-Plate for Gas Sensor Applications
Development of Hot Press Machine for Superplastic Forming Technology
Design of New-Type Vertical Dredging Equipment for Coal Bunker
Research on Nonlinear Dynamic Characteristics of Fluid-Conveying Pipes System
Solid-State Synthesis and Optical Properties-Controlling Studies of CdO Nanoparticles
Size Effect on the Micro-Extrusion Forming of Zr-Based Amorphous Alloys
Finite Element Analysis on Mechanical Performance of CFRP Used in Masonry Structure Strengthening
Computer Aided Styling Design in Automobile
Wear Behavior of B4C Ceramic Nozzles
Preliminary Studies on the Functional and Structural Design of Forest Fire Helmet
Agent Model and Reasoning Mechanism for Task-Aware in Virtual Assembly
Experiment Research on the Influence of Fretting on Crack Propagation
Vibration Analysis of Diesel's Undercarriage by Virtual Measure and Actual Measure
Polypropylene Fiber Reinforced Concrete for Rigid Airfield Pavement
Properties of Lead-Free High Refractive Index Barium-Based Glass Doped with TiO2
The Function Mechanism of Current Density on Antimony Nanopowder Prepared by Electrochemical Method
Preparation and Electromagnetic Property of Hexagonal W-Type Ferrite Obtained by the Method of Coprecipitation with Flux
Finite Element Analysis on Thermal Structures of Heavy Machinery Gearbox
High-Temperature Thermoelectric Properties of Cu-Substituted Bi2Sr2Co2OY Oxides
Friction and Wear Behavior of Micro-Arc Oxidation Ceramic Coating on Pure Magnesium Surfaces
Formation Mechanism of Diffusion Welded Joint
Fatigue Life Prediction of Notched Specimen under Multiaxial Cyclic Loading
Numerical Study on the Effect of Inner Tube Position on Heat Transfer Process in Self-Recuperative Radiant Tube
Elastohydrodynamic Lubrication Design of Planetary Gear Transmission
A Method of Type Map for Rigid-Body Guidance Based on Burmester Curve
The Texture of the Performance of Product Design
Impact of Relationship among the Fundamental Blocks in Production Process to implement Re-Engineering: An Empirical Analysis in SMEs
Research on Low-Pressure Common Rail Electrical Control Injection System of Dimethyl Ether Engine
Tool Path Planning of the Micro Cowled Integral Impeller
Evaluation of the Adhesion of Diamond-Like-Carbon Coronary Stent
Hydraulic System Design for Hexagon Workpiece Flipping Equipment
Study of Extrusion Process for a Titanium Alloy Tapered Piece
Microstructure and Toughening Mechanism of Compressive Fractured Nacre
Effect of Dispersion Medium and Dominated Evaporation on the Pattern Formation of Colloidal Suspension
The Research of Camellia Oleifera Seed Winnowing Peel Test
Electricity Control System of Semi-Automatic Figuration Machine of the Grind Material
Research on the Knowledge Innovation Abilities of University Science Parks Based on GEM Model
The Preparation and Properties Research on Lanthanum-Rich Film Cathode
The Measurement of LED Domain Wavelength Based on LabVIEW
Finite Element Analysis for Belt Conveyor's Drum
The Design and the Topological Optimization of the Tracked Triangle Wheel's Basic Frame
Study on the Damage Mechanism of Bridge Pier and Foundation by Turbulent Debris Flow
Robust Stability of Uncertain Switched Delay Systems with Nonlinear Perturbations
Cooperative Pricing Decision Model in Supply Chain
The Modularity and Connectivity of the Master Structure of Complex Product Families
Preparation of Water-Resistant Electrode Coating with Palmitic Acid by Microwave Reaction
Thermoelectric Characteristics of Pb- and La-Doped Bi2Ba2Co2OY Ceramics
The Microstructure and Erosion Wear Performance of HVOF-Sprayed Cr3C2-NiCr Coatings with Different Feedstock Powder
Transient Dynamic Analysis and Optimization of Chamber
Research on the Reshaping Device for Ridge-Till and No-Till Seeders
The Mechanical Behavior of Aluminium Alloy Quenching Process
Effect of Ammonia on Preparation of Ammonium Polyphosphate
Ammonium Polyphosphate Crystalline Transformation from Form II to Form V
Study on Blasting Driving Roadway Single Transformation Ejector Auxiliary Ventilation
Research on Compound Powder of Bonded NdFeB Magnets from Injection Molding
The Designation of Intelligent Power-Saving Controller on Automobiles
High-Rise Fire Escape Device's Design and Analysis
A Steady State Model for the Rheological Behavior of Semisolid Al-6.5wt%Si Alloy
Research on Air-Structure Coupling Dynamic Characteristics of Sounding Board Driven by Gunpowder Pulsation
Influence of Surface Wettability on Dropwise Condensation Heat Transfer
Laser Ablation of Alumina Ceramic in Sodium Hydroxide Solution with Nd:YAG Laser
Effect of Heat Treatment on Hardness of Electroless Ni-P Plating
Research on the Optimization of Relief Supplies Distribution Routing Based on Multiple Models
Introduction of Near-Bit Geosteering Drilling Technology and Instrument Application in Thin Oil Exploration
Research on Design of SOHO Residential Unit
Investigation of Phase Composition and Microstructure of the FeAl Intermetallics Compounds Bulks Fabricated by Mechanical Alloying Process and Hot-Pressing Process
Microstructure and Corrosive Wear Property of Super High Chromium Cast Iron (SHCCI)
Application of XML Based EDI in Logistics Bills Circulation
Production and Grain Refinement of ASTM A668D Steel Heavy Main Shaft for Crusher
Synthesis and Properties of Cellulose Stearate
Research on Distribution of Error in CNC Curve Grinding
Numerical Simulation of Gas Flow Field in the Moving Bed of Corex Melter-Gasifier
Damping Capacity of Fe-Ga Alloys
Study on Naval Airport Aerial Equipment Distributed Storage System
Effect of Ho Doping on the High-Temperature Thermoelectric Properties of Ca3Co4O9-Based Oxides
Research on Dynamic Torque Control Strategy for Parallel Hybrid Electric Vehicle
Research on Mechatronic System of Comprehension Reaction Time in Mesopic Vision
Research on the Best Assessment Subjects for the Environmental Protection Performance of Local Party and Government Officials
Effect of Stepped Aging Treatment on Microstructure and Properties of AA7085 Aluminum Alloy
Effect of Postweld Heat Treatment on Toughness of the Heat Affected Zone in ASTM4130 Steel with Single-Pass Welding
The Service Quality Evaluation of Machine Tools in Manufacturing Shop
Study on Quality Problem Information Classification Using ODC Method
New Delay Dependent Stability Analysis for Switched Neutral Systems with Mode-Dependent Delays under Arbitrary Switching Laws
Structure Optimization and Application of Conical Convergence High-Pressure Jet Nozzle
The Effect of Magnetic Field on the Hydration of Nanoscopic Hydrophobic N-Alkane Plates
Study on CO2 Laser Welding of AZ31 Magnesium Alloy Sheet Produced by Strip Casting Process
Effect of Laser Modification Welding on Formation of Aluminum Alloy
Numerical Calculation and Analysis of Mechanical Strength of Steel Wire Product
The Cylindrical Structure of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cell
The Simulation Experiments Research of Plow Bit Cutting Coal Rock Basing on Ls-Dyna
The Sensing Characteristics Responded by Resistance of Carbon Fiber Layer with Epoxy-Matrix
Innovative Examples of Product Design Based on Material
Detection and Reinforce of a Reinforced Concrete Box Culvert Suffered a Conflagration
The Experimental Research of Axlehousing Hydroforming Processing
Study on Wear-Preventing of Needle Valve in Fuel Injection System Mounted on DME Engine
Pattern Recognition of Typical Incipient Mechanical Failures in Circuit Breakers
Research on Corona Wire Application for High Dust Load ESP of Cement Kiln
New Method Used to Prepare Paraffin Spheres Based on Digitalization of Microfluids Technology
Body Welding Quality Control Based on a CUSUM Control Chart
DTH Drill Fracture Analysis of the Key Parts
Research on the Cutting Performance of ZrN Coated Tools
Dealing with End Effect of EMD Based on Gray Theory
Study on Rotary Characteristics about Light Type Hydraulic Excavator
Effect of Austenization Holding Time on the Martensitic Transformation in 30CrNi3MoV Ultra-High-Strength Steel
The Flow Stress Characteristic and Constitutive Equation of 6016 Aluminum Alloy in Warm Forming
Temperature Field Simulation of Electron Beam Surface Quenching on Ductile Iron QT600-3
The Finite Element Simulation Study on Plow Bit's Resistance during Cutting Coal and Rock
Preparation of Metal Cobalt Powder by Co-Precipitation and Heat Decomposition Method
R&D on Wollastonite-Based Low Carbon Products
Study on Group Behavior of Short Crack for Low Cycle at High Temperature Based on Fractal Theory
Characteristics Analysis and Study for Area-Changing and Damp-Increasing Range Correction Device
A Quantitative Study of Precipitation Evolution during Annealing Treatments of a Ti-IF Steel
Study on CTOD Fracture Toughness of Welded Joint of X80 Marine Drilling Riser
Development of the 600MPa High Aluminum Galvanized Dual Phase Steel and its Application
Image Recognition Based on Euler Sequence by PCNN
The Study of Destruction Status of Inclined Shaft Second Lined in Liangshui Tunnel
The Application of Ground Penetrating Radar in Railway Tunnel Concrete Quality Detection
Return to Original Purity and Simplicity"- Creative Product Design Research
Study in Simulated Heat-Affected Zone of Ship Steel
The Brief Analysis on Automobile Color Design
by "Nielsen BookData"
