Application of chemical engineering : selected, peer reviewed papers from the 2011 International Conference on Chemical Engineering and Advanced Materials (CEAM 2011), May 28-30, 2011, Changsha, China
著者
書誌事項
Application of chemical engineering : selected, peer reviewed papers from the 2011 International Conference on Chemical Engineering and Advanced Materials (CEAM 2011), May 28-30, 2011, Changsha, China
(Advanced materials research, v. 236-238)
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
- Part 3
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
This book aims to correlate the latest advances in, and applications of, biomass and resource utilization technology, energy chemical industry, biochemical industry, paper and fiber engineering, chemical process machinery, nano-biochemistry and nano-materials, medicine and biomedical engineering, etc. It will serve as a useful handbook guide to those fields.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
目次
Preface and Organizing Committees
1 Biomass and Resource Utilization Technology
Phenolic Resin Modified Soybean Protein Adhesive
An Anti-Collision Risk Assessment Method for Single-Row Wellheads in Vertical Well Section of Cluster Well
Improving the Fermentation Quality and Nutritive Value of Barley Straw Silage by Adding Lactic Acid Bacteria and Cellulases
Isolation and Characterization of Pepsin-Solubilized Collagen from Skin of Argentine Shortfin Squid (Illex argentinus)
Study on Gas-Phase Catalytic Conversion of Turpentine-Based Dipentene (TBDP) by Pd/C Catalysts
Texture of Wheat Bread Improved by -Amylase and Glucose Oxidase
The Ultrasonic Extraction of Oil from Prickly Ash (Zanthorylum bungeanum maxim) and its Composition Analysis
Research on Combustion Characteristics of Cooking Oil Tar in Pipe by TG-FTIR Analysis
Study of Aqueous Two Phase System on Water Soluble Bio Oil
Gas Column/Mass Spectrometry Analysis of Bio Oil Treated by Aqueous Two Phase System
Very High Gravity Fermentation Using Sweet Potato for Fuel Ethanol Production
Preparation of Water-Soluble Soy Protein-Based Surfactants by Oxidizing Disulfide Bonds
Simulation and Optimization of an O-Xylene Columns
Study on the Solid-State Fermentation Conditions for Producing Thermostable Xylanase Feed in a Pressure Pulsation Bioreactor
Substitution of Biomass for Coal and Coke in Ironmaking Process
Preparation and Characterization of PVA-Collagen Composite Fibers
Pretreatment of Fir Powder and Its Dissolution in Ionic Liquid of 1-(2-Hydroxylethyl)-3-Ethylene Imidazolium Chloride
Effect of Different Ways of Ammonia Removal on the Fine Structure and Properties of Hemp Fibers
Study on Biogas Production by Dry Anaerobic Co-Digestion of Animal Manure and Straw
Mn/ZSM-5 Participated in Degradation of Cellulose
The Effect of Gleditsia Saponin on Simultaneous Saccharification and Fermentation of Furfural Residue for Ethanol Production
Preparation and Catalytic Performances of Glucose Char Sulfonic Acids
Synthesis and Characterization of Liquefied Corn Barn-Based Epoxy Resins
Preparation and Characterization of Microcystins-LR by HPLC and HPLC-MS
Characterization and Utilization of Corncob Lignocellulose for Adsorptive Removal of Basic Dyes from Aqueous Solution
Componential Analysis of Esterified Bio-Oil Prepared from Pyrolysis of Rice Stalk
Selective Catalytic Conversion of Glucose to 5-Hydroxymethylfurfural over Zr(H2PO4)2 Solid Acid Catalysts
Hydrolysis Kinetics of Wheat Straw in Saturated Formic Acid / 4% Hydrochloric Acid Solution
Analysis on Products and Residues of Liquefaction of Wheat Straw & Polyester in Supercritical Ethanol
Harvesting Microalgae Biomass by Instant Dissolved Air Flotation at Batch Scale
Effects of Micro-Emulsion Fuels on the Performance and Emissions of Diesel Engine
Biosorption of Cr(VI) from Aqueous Solution by Aspergillus Niger
Volatility of Biodiesel Obtainted from Rapeseed Blends with Petroleum Diesel
Improving the Cold Flow Properties of Biodiesel Derived from Palm
Cellulose Saccharification after Ultrasonic- Assisted Ionic Liquid [Amim][ HCOO] Pretreatment
Sulfite Pretreatment (SPORL) for Robust Enzymatic Saccharification of Corn Stalks
A Study on Dry Anaerobic Fermentation Technology of Pineapple Leaf Residue
Investigation and Screening of Superior ECM Fungi Strains for Plantation in South China
Fraction Distribution Changes of Heavy Metals in Co-Pyrolysis of Sewage Sludge and Corn Straw
Experimental Study of the First Pyrolysis of Cellulose
The Variation of POD Activities in Bergenla tianquanensis in Tissue Culture Progress
Variation Regulation of Bioactive Components in Rosemary Leaves and Extraction Procedure
Compatibility Enhancement of Poly(lactic Acid)/Crosslinked Starch Composite by Vacuum Heating Treatment
Determination Method and Extraction Process of Total Flavonoids from Leaves of Ilex Cornuta L.
Mechanical Properties and Morphologies of Rice Husk Silica/Epoxy Nanocomposites
Preparation and Capability of Activated Carbons with High Specific Surface Area by Microbial Enzymatic and Chemical Activation
Characterization of Pyrolysis Liquids of Waste Wood-Based Board
Structural Change of Rice Husk Char Particles during Steam Gasification
Removal of Heavy Metal Ions from Aqueous Solutions by Adsorption Using Modified Orange Peel as Adsorbent
Phenolic Foam from Liquefied Products of Walnut Shell in Phenol
Synthesis of Epoxidized Rubber Seed Oil
Screening and Desilication of a Silicate Bacteria
Response Surface Optimization of Concentrated Sulfuric Acidic Hydrolysis of Poplar Sawdust
Biomass Gasification and its Applications at Home
Upgrading of Methane from Biogas by Pressure Swing Adsorption
Research on Extraction and Refinement of Gutta-Percha from Eucommia Ulmoides Leaves after Comprehensive Utilization
Modulus of Elasticity Test and Numerical Fitting of Plybamboo Form
Ultrasonic-Assisted Preparation, Characterization and Antibacterial Activity of -Chitosan from Squid Pens
Effect of Coal Structure on Mechanical and Thermal Properties of Coal Filled Soy Protein Composites
Rapid Carboxymethylation of Xylan-Rich Hemicelluloses by Microwave Irradiation
Absorbencies of KLPAAM Superabsorbent Composite in Metal Ion Solution
Availability of Chemically Modified Wheat Straw Application on Oil Spill Clean up
The Chemical Composition and Ensiling Characteristics of Sweet Corn Processing by-Products
Microwave-Assisted Extraction of Flavonoids from the Leaves of Syringa oblate
Study on Dilute Sulfuric Acid Hydrolysis of Corn Stover
Synthesis of New Benzoxazine from Cardanol-Furfural Resin and the Properties of the Corresponding Polymer
Preparation and Properties of Internally Plasticized Bio-Based Film
Bio-Fixation of CO2 from Coal-Fired Power Plant by Micro-Algae Chlorella Sp.: Effect of Biological Conditions
Biological Conversion of Corncob Residues of Xylose Manufacture to L-Lactic Acid
Liquefaction of Cellulose in the Presence of Phenol and Main Reaction Pathway of its Liquefied Products
Liquefaction of Cornstalk in the Presence of Polyhydric Alcohols
The Structure and Properties of the Degummed Kosteletzkya virginica Bast Fiber
The Study on Thermal Properties of Solid Solution (K, NH4)Cl
Synthesis of NaY Zeolite Molecular Sieves from Calcined Diatomite
Analysis on Cellulose Crystalline and FTIR Spectra of Artocarpus heterophyllus Lam Wood and Its Main Chemical Compositions
Characterization of SiC Whiskers from Rice Husks in Argon Atmosphere
Research on Developing Carbon Resource with Primary Sludge by Two-Stage Complete Mixing Ferment Process
Characterization of Rice Husks of Pyrolysed at 320 DegreesC and Adsorption Ni2+ Ions
Steam Reforming of Benzene over Modified Ni/olivine Catalyst
Study on Chemical Compositions of Manihot Esculenta Crantz(M. utilissima Pohl)Stalks
Research on Visible Light Photocatalytic Performance of Tungsten Doped TiO2
The Study of Enzymolysis and Saccharification Process of Bagasse Pith
Study of Metal Complexes' Solubility in Supercritical Carbon Dioxide
Influence of Rice Residue-Derived Charcoal on Sorption and Desorption Behaviors of a Nonionic Pesticide Carbofuran in a Soil
Muti-Factors Correlation Study for the Additive Effect on Manufacture of Residue Derived Fuel (RDF) from Rice Husk
Study on Saccharification and Hydrolysis in Cellulose of Bagasse
Tungsten Carbide Catalyst Supported on Carbon Nanotube for the Hydrogenation of Cellulose
The Study of Sludge Characteristics for One-Stage Autothermal Thermophilic Aerobic Digestion Process
Combustion Characteristics of Coal and Biomass Blends with Adding Absorbing Sulfur Agent
Delignification with Alkaline Peroxide from Lespedeza Stalks Steam-Pretreated at Low Severity
Enzymatic Hydrolysis of Furfural Residues Using Crude Trichoderma cellulases
Effect of -Glucosidase and Gleditsia Saponin on Enzymatic Hydrolysis Process of Furfural Residues
Preparation of Glass-Ceramic Materials from Rare Earth Tailings
Biosorption of Acid Dyes Using Modified Chitosan: Effect of Dye Structure, Hydrogen Bonding and PH
Extraction and Analysis of Water-Insoluble Pyrolyzed Oil from Rice Hull
Effect of Phenol on the Treatment of Disorderly Discharged Sewage in Tidal Rivers by Bio-Film Process
Study on Sewage Disposal by Bio-Film Process Dosing with Enzyme
Synthesis and Flame Retardant Properties of Melamine Modified EH Lignin
Microtructure of Woodceramics Modified By Enzymatic Hydrolysis Lignin
Experimental Research on Self-Compacting Concrete with Different Mixture Ratio of Fly Ash
Synthesis of Biodisiel from Used Cooking Oils Catalyzed by Solid Acid
Effect of CO2 Remover on Decomposition Rate of Glucose in Supercritical Water
Study on Desulfurization of with Solid Waste by Microwave
Application of Biomass Materials for Heat Insulation in Rural Buildings
Direct Convert Glycerol into Alcohols by Disproportionation Reaction
Performance Analysis of CO2 Capture System by MEA Method Based on Solar Assisted Heat Pump Technology
2 Energy Chemical Industry
Single Zone Simulation of Polycyclic Aromatic Hydrocarbon Formation in n-Heptane HCCI Combustion
Preparation of Phosphomolybdic Acid/Activated Semi-Coke Catalyst and its Application for Oxidative Desulfurization of Gasoline
Vaporization Kinetics and Vapor Pressures for Petroleum Fractions Using Thermogravimetry Analysis
Characterization of Spent Catalysts during Hydrodemetallization of Atmosphere Residue
The Effects of Nanofluid on NH3H2O Bubble Absorption Performance under Adiabatic and Non-Adiabatic Conditions
Preparation and Performance Research of Polyimide Modified Nylon Resin
Preparation and Characterization of a New Type Lithium Hexafluorophosphate Complex
Influence of Gas Supply Mode on CO2 Hydrate Formation in Water Spraying Reactor
GC/MS and FTIR Analyses of the Extracts from an Indonesia Natural Asphalt
FTIR Analysis of Extractable Fractions from FourIndonesian Natural Asphalts
Theoretic Study on a Direct-Expanded Ground-Source Heat Pump
Study of Polymeric Crude Oil Fluid Improver Crystallinity
Active Carbon for Coal Mine Methane Separation by Pressure Swing Adsorption
Numerical Stimulation of Mass Transfer in Cathode Diffusion Layer of PEM Fuel Cell by Lattice Boltzmann Method
CO2 Reforming of CH4 via Cold Plasma Jet Combined with Catalyst
Optimization of Operating Parameters of Liquid-Liquid Circulation Fluidized Bed for Ice-Making Based on Exergy Method
Numerical Simulation and Experiment on the Electrolyte Flow Distribution for All Vanadium Redox Flow Battery
A Novel Multifunctional Bionic Fuzzy-Ball Drilling Fluid
Contrastive Studies of Coal between Direct Ultrasonic Extraction and Soxhlet Extraction
Study on Dewatering of Fine Coal by Combination of Electrolysis and Filtration
Study on a New High Efficiency Energy-Conservation Multi-Effects Bio-Ethanol Distillation Technology
Synthesis of Large-Scale Heat Exchanger Network Based on Sub-Networks
Microstructural Characteristics of Toluene Insolubles from Coal Tar
Experiment Study on Biodiesel Produced from Soybean Oil by Solid Base Catalysts
FTIR Characterization of the Residues of High-Temperature Extraction and Subsequent Oxidization Depolymerization of Lignite
Effect of Solidification Pressure on the Interface Heat Transfer Coefficient in Counter-Gravity Casting
The Influence of Structure Control Techniques on the Electrochemical Performance of PANI Electrode Materials
Study on Brown Coal Pyrolysis and Catalytic Pyrolysis
Design and Evaluation of Compound Chemical Scale Remover
Application of Hydrogen Storage Materials in Hydrogenation of Coal-Derived Preasphaltene
Prediction for the Riser's Average Solids Concentration Based on the Least Square SVM Method
Synthese of Cancrinite from Alkali-Fused Fly Ash by "Dry Method"
Coal Particles Combustion Model and Micro Feeding Technology in Drop Tube Furnace
Cobalt Carbonyl Cluster as Catalyst Precursor for Fischer-Tropsch Synthesis
Experiment Investigation on Heat Transfer Characteristics of a Novel Gravity-Assisted Heat Pipe Heat Exchanger
Synthesis and Characteristics of NiS for Cathode of Lithium Ion Batteries
Optimization of Synthesis Condition for LiFePO4/C Cathode Material
The Impact of Reducing Carbon on Electric Property and Morphology of Li3V2 (PO4)3 by Wet Milling and the Electric Property and Morphology Study of Li3V2 (PO4)3
Preparation of n-Alkylacrylate and Vinyl Acetate Copolymer and Its Influence on Low-Temperature Fluidity of Diesel Fuel
Distribution of Alkylene Bridge Bonds in Shenfu Coal
Solid Base CaO Catalyzed Methanolysis of Lignite
Preparation and Ultra-Deep Hydrorefining Performance of Ni-P/Al2O3-ZrO2 Catalysts
Preparation of Maleic Rosin-Based Macromonomer and Copolymerization with Styrene and Methyl Methacrylate
Aquathermolysis of Heavy Oil Model Compounds
Discuss on Reducing Resistance Force in Micro Flow
Application of Thermodynamics to the Allocation of Cumulative Exergy Consumption in the Multiproduct Separation Processes
Stability and Corrosiveness of M30 Methanol Gasoline
Modeling and Analysis of Static Water Feed Solid Polymer Water Electrolysis Cell
Study on Solidification Mechanism of Chloride Salt in Base Course Material of Cement-Fly-ash-Flushed-by-Seawater
B-Mode Grey Relational Analysis of Surface Functional Groups Change Rules in Coal Spontaneous Combustion
Synthesis of Pure Zeolite X from Palygorskite Clay Using a Two-Stage Method
A New Catalyst on Di(1-Naphthyl)methane Hydrocracking and Kinetics Analysis
Research Progress of Electro-Oxidation Intensification Leaching for Refractory Ore
Strength Prediction of Bonded T-Peel Joint with Single Overlap Support
Heat and Mass Transfer Model for the Thin Material Layer Consisting of Zinc-Containing Pellets in Rotary Hearth Furnace
Effect of Microwave on Iron Potassium Catalyst Fischer-Tropsch Synthesis
Fourier Transform Near Infrared Spectroscopy Analysis of Power Plant Coal Quality
Research into the Effects of Pour-Point Depressant on Different Wax-Contents Crude Oils
Simulation of Co-Current Multi-Effect Drying System
Experimental Investigation of Enhanced Oil Recovery by Thermal Foam Flooding
A Novel Natural Gas Liquids Recovery Process from Oil Field Associated Gas with LNG Cryogenic Energy Utilization
Study and Application of EOR on Conventional Heavy Oil Reservoir
Selective Methanation of CO over Mesoporous Nano Zirconian Supported Ni Catalysts
Effect of Hydro-Thermal Treatment with CaO Addition on the Coking Properties of Shengfu Coal
Intensified Viscosity Reduction of Heavy Oil by Using Reservoir Minerals and Chemical Agents in Aquathermolysis
Upgrading Heavy Oil by Catalytic Aquathermolysis Using Formic Acid as Hydrogen Donor
Hydrocracking of Di(1-Naphthyl)methane over Acid Solid Catalyst
Synthesis of Four Monodimensional Medium-Pore Zeolites and their Hydroisomerization Performances of n-Dodecane
Study on the Microstructure and Behaviour of Unburnt Pulverized Coal in BF
Preparation of Benzene Polycarboxylic Acids by Oxidation of Coal with NaOCl
Preparation and Electrochemical Performances of Calcium Zincate Synthesized by Microwave Method
Application of Chemical Storage in Smart Grid and Analysis on Loss Reduction
The Electrochemical Property of Cobalt Borate as a Novel Anode Material for Lithium-Ion Battery
Study of Multi-Variable Grey Model on Kinetics of Methyl Orange Photodegradation Reaction by Sm-Doped TiO2
Organosulfur Compounds in CS2 Extractable-Fractions from Four Chinese Coals Oxidized with NaOCl
3 Biochemical Industry
Preparation and Characterization of Citric Acid Modified Marigold Dregs Biosorbents
Concentration of Miglitol on Adsorption Effect of Equilibrium and Kinetics
Influence and Mechanism of Cu2+ on Removal of U(VI) by Sulfate Reducing Bacteria
Immobilization of Glucose Oxidase on L-lysine Modifided Chitosan
Determination of the Antioxidant Capacity of JiangHuang JiangZhi Capsule with DPPH Assay in Vitro
Mass Transfer Model for Extraction Process of L-Theanine across Bulk Liquid Membrane Containing Combined Carriers
Optimization of Process Parameters for Ethanol Production from Alkaline-Pretreated Wheat Straw by Fed-Batch Simultaneous Saccharification and Fermentation
Optimal Study of Co-Immobilized GOD/CAT on Cross-Linked Chitosan Microsphere Containing L-Lysine
Comparison of Lipase-Catalyzed Synthesis of Cyclopentadecanolide from Malana Oleifera Chum under Organic System and Biphasic System
Investigation of Calorimetric Method inside the Fermentation Process of Glutamic Acid
Changes of Cell Membrane Permeability Induced by DMSO and Ethanol in Suspension Cultures of Taxus Cuspidata
Synergistic Nitrogen Removal by Anaerobic Ammonium Oxidation-Denitrification Integrated Reactor of Immobilized Microbe
Cage-Shape Macroporous/Mesoporous 3DOM SiO2 Immobilized Papain
In Situ FTIR Study of Methanol to Hydrocarbons Conversion Process on HZSM-5 Zeolite
Supported Manganese Dioxide Catalyst for Seawater Flue Gas Desulfurization Application
Study on the Substrate Specificity of Xylose Isomerase N91D Mutant from Thermus thermophilus HB8 by Molecular Simulation
Thermostability Evolution of the Xylanase
(R)-1-Phenylethanol Production from Racemic 1- Phenylethanol by Double Strains Redox-Coupling
Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol by Biocatalysis
Amorphous Au Thin Films and their In Situ Crystallized Nanoparticles
Study on Enzymatic Characteristics of Chitin Deacetylase
Numerical Simulation of Taylor Couette Flow in Bioreactor
The Influence of PH and Dissolved Oxygen Tension (DOT) on Mycelium Growth and Cellulase Production by Trichoderma Reesei
Preparation and Characterization of Lignin-Phenolic Foam
Preparation of H5PMo10V2O40 /SBA-15 Catalyst and Application in Synthesis of Tributyl Citrate
Effect of Microwave Irradiation on the Structure of -Amylase
Research on Conditions of Solid-State Fermentation and Characters of Tannase by Aspergillus Niger B0201 with Gallnut
Cloning of Laccase Gene from Coriolus Versicolor and Optimization of Culture Conditions for Lcc1 Expression in Pichia Pastoris
In Situ Synthesis of Zeolite NaKL In Highly-Enriched Spinel Matrix
GC-MS Analysis on Heartwood Extractive Chemical Components of Different Provenances Teak(Tectona Grandis L.f.)
Decolorization of Crude Tussilago farfara L.Polysaccharide by Resins
Expression of Trichoderma reesei -Xylanase in Escherichia coli and its Function in Degradation of Juncao Holocellulose
Catalytic Cracking of n-Hexane over MeAPOs Molecular Sieves
Hydrogen Production from Ethanol Steam Reforming over Ni-Cu/ZnO Catalyst
PtRh@Pt5C/Catalyst Preparation for Methanol Electrooxidation
Cloning and Prokaryotic Expression and Structure Prediction of Prx II the Differentially Expressed Gene under AFB1 Stress
4 Paper and Fiber Engineering
Qualitative Characterization and Identification of Polylactic Fiber based on GC-MS, IR and Element Analysis
Analysis of Characters and Structures of Polylactic Fiber
Study on the Influence of Linting and Picking of Paper
Application of near Infrared Spectroscopy and Multivariate Analysis in the Forest Products Industry
Rendering Rayon Fibres Antimicrobial and Thermal-Responsive via Layer-by-Layer Self-Assembly of Functional Polymers
Application of Precipitated Silica in Low Basis Weight Newspaper
Study on Structure of Amphoteric Starch and Its Reinforcing Effect on Secondary Fiber
Preparation and Application of Wheat Straw Fibers Modified by In Situ Grafting Copolymerization of Caprolactam
Cleaner Production Technology on Controlling Emissions of Unintentionally Produced PCDD/Fs from Non-Wood Pulp and Paper Mills in China
Preparation of Plate-Shaped Calcium Carbonate and its Application in the Coating Paper
Effect of Hot Water Pre-Extraction on APMP Pulping Process of Pink Sheets Bamboo
Study on the Synthesis Optimization of Paper Wet-Strengthening Resin PAE
Effects of Paper Properties and Printing Conditions on the Ink Penetration into Offset Paper
Synthesis and Spectral Properties of PH Fluorescent Probes Based on Distyryl Ketone
The Stickies Removal by Steam Explosion from Recovered Paper
Properties of Flame-Retardant Cellulose Fibers Prepared from Cellulose[Amim]Cl Dope Solution
Study on Spinning and Structure Properties of Regenerated TussahSilk/Cellulose Blend Fibers Using Ionic Liquids
The Effects of the Hollow Plastic Pigment on the Print Properties of High Light Ink_jet Paper
Application of Talcum Powder as Filler in the Production of Base Sheet of Paper-Process Reconstituted Tobacco
Effects of Protective Colloid on the MF-UF Double Wall Micro-Encapsulation Containing Essence Oil
Effect of Hot-Water Pre-Extraction on Alkaline Pulping Properties of Wheat Straw
Analysis of Coating Pore Structure and its Effect on Printability of Low Gloss Coated Paper
Application of Edible Canna Residue in the Papermaking
A Two-Parameter Model of FRP Laminates Stiffness Reduction
The Preparation and Property of Organic Solvent Lignin and PVC Composite Materials
Preparation and Water Resistance of the New Water Epellent Agent of Paper Lunch Boxes
Preparation of Solutions of Papermaking Wet End Chemicals Using Process Water
Research on Dynamic Mechanical Properties of Poly(m-Phenyleneisophthalamide) Paper
The Study of Kraft Continuous Cooking of Knenaf
The Use Effect of Reed Ethanol Lignin Flocculant
Practice of Environment Management in the Wheat Straw Pulping Workshop
Study on Bleaching of De-Inked Pulp
CTMP Modification with Plasma Treatment
The Research on Adjusting Color of Tinting Pigment and the Controlling of the Parameter
Effects of Paper Properties on Printing Dot Gain and Color Gamut
The Impact of Lignin Content on Paper Physical Strength of CTMP
Effect of Paper's Spectral Reflectance on the Printing's Dot Gain
Understanding the Precipitated Calcium Carbonate Flocculation Mechanism Induced by Starch through Population Balance Modeling
The Study of a Kind of New Synthetic Paper Coating Thickness Agent
Surface Coatings Based on Carbon Paper and its Electromagnetic Shielding Property
Effect of Formation Nonuniformity on the Mechanical Strength of Aramid Paper
Analysis of Calcium Sulphate Filler and its Application in Papermaking Process as Functional Filler
Convective Heat Transfer Characteristics of Laminar Flow in Sinusoidal Corrugated Tube
Research on FTIR Analysis of Populusnigra L. Lignin Structure Changes in Different Bleaching Processes
Effect of Flotation Parameters on Old Book Paper Deinking Efficiency
Gradient Intensified Alkali Extraction of Kraft Pulp by Oxygen-Containing Bleaching Agents
The Study on Refining of Masson's Pine Kraft Pulps for Sack Paper
Acid Extracting Pectin from Guangyechu White Bast and Subsequent Ammonium Sulfate Pulping
The Effect of Microwave Treatment on the Hydrogen Peroxide Bleaching of Soda-AQ Wheat Straw Pulp
Study of Energy-Saving Characteristics of Propylene-Propane Mixtures in the Heat Pump Distillation Column
Study on Foamed Buffer Material with the Residues of Wheat Straw Pulping
Effect of Carboxylated Styrene-Butadiene Rubber Latex Amount on the Viscoelastic Behavior of Paper Coating Modified with Nanosized Particles
On Structure and Heat-Transfer Mechanism for Multi-Channel Drying Cylinder of Energy-Saving Type
Research on the Color Models of the Heat Transfer Printing Paper
Enhancement of AOCC Pulp by Laccase Treatment
Enhance Characteristics of Paper Surface with Cationic Hemicelluloses
Preparation of New Alumina Silicate Refractory Fiberboard and Study on its Performance
OMG Neutral Deinking Technical Conditions and Mechanism
The Effect of Printing Conditions on Wet Picking and Wet Resistance on the Surface of Offset Paper
The Research on Rosin Esterified with Glycerine Used as Neutral Sizing Agent
Study on the High Charge Density Polyamine System in Controlling Dissolved and Colloidal Substances of High-Yield Pulp
Application of TiO2 to Improve the Brightness Stability of HYP Containing Coated Paper
Application of near-Infrared Spectroscopy to Predict Paper Properties of Acacia
Treatment of NBKP with Cellulase to Reduce the Refining Energy Consumption in Production of Grease Proof Paper
Synthesis and Application of Glyoxalted Polyacrylamide Paper Strengthening Agent
The Influence of CMC on Paper Coating Properties
Research Progress on Inherently Conducting Polymer Coated Paper
Analysis and Synthesis of Surface Sizing Agent BLD-02
Study on Model of Dot Gain in Ink-Jet Printing
Synthesis of Phenol-Formaldehyde Resol Resins Using Modified Alkaline Lignin with Laccase
Preparing Process and Properties of Collagen Modified Cotton Fiber
The Kinetics of Oxygen Delignification of Reed Kraft Pulp (I)-Kinetics of Delignification
Action Mechanism Analysis of Enzymatic Refining for Bleached Simao Pine Kraft Pulp
Target Kappa Number for AS/AQ Pulping of Wheat Straw
Comparison of KP Pulping Properties between Heartwood and Sapwood of Popla I-69
Differences in Fiber Properties and Basic Wood Density in Triploid Hybrids of Populus Tomentosa
Effect of PPTA Fiber Morphology on the Performance of Paper-Based Functional Materials
Preparation and Characterization of Styrene Acrylate Emulsion(SAE) Surface Sizing Agent with Rosin as Functional Monomer
Study on the Colloid Chemistry Behavior in Domestic Old Book Paper (DOBP) Deinking System
X-Ray Photoelectron Spectroscopy Study of Silane Coupling Agents/Basalt Fiber Interface
Multi-ANN Predictive Control of Citrus Peel Supercritical Extraction Temperature
5 Chemical Process Machinery
A Simple Method to Synthese PNIPAM Hydrogel with Improved Response Rate by Conventional Radical Crosslinking Polymerization
Detached Eddy Simulation of the Turbulent Flow in a Stirred Tank
Porous SiO2/SiC Fiber Via Carbothermal-Reduction of Hybrid Fiber in Air Flows
Simulation and Optimization on Silicon Carbide Synthesis Furnace Power Curve
Study on the Uniform Distributed Mechanics of Ink Droplet in Inkjet Printing Equipment
3D Numerical Simulation of Fluid Flow and Heat Transfer in Tube with Spiral-Flange Insert
Unsteady Behavior of Real Gas in Wave Rotor Refrigerators
Mechanical Properties of SiC/FexSiy Composites
Hydrodynamics Simulation of Gas-Solid Flow Field in Conveying Vessel
Microstructure Formation in Pb-30wt.%Bi Peritectic Alloy
Simulation Study of Gas-Solid Macro-Mixing Characterization in Small Fixed-Fluidized Bed Reactor
Simultaneous Resolution of Clenbuterol Hydrochloride Enantiomers and Propranolol Hydrochloride Enantiomers using Thin-Layer Chromatography
A Novel Formaldehyde-Free Adhesive from Jatropha Curcas Press-cake
Experimental Study on Desulfurized Gypsum Modified Magnesium Oxychloride Cement
Automatic Packing Machine Hopper of Six-Prism Pastel
Study on Rheological Behaviors of Ultrafine CaCO3 Aqueous Suspensions Modified with Acrylate Macromolecular Modifiers
Numerical Study on the Oscillation Characteristic of the Static Gas Wave Refrigerator Influenced by the Design Parameters
Experimental Investigation of Falling Film Evaporation on Horizontal Tubes at Low-Pressure
The Two-Dimensional Flow Analysis of Continuous Spiral Reamer Bionic Structure on the Basis of ANSYS
Clay Materials Extrusion Process Resulting Field Simulation and Analysis
Flow-Field Analysis and Performance Prediction of Pressure-Exchange Ejector
Role of Biopolymer in Nacre Heated in Nitrogen Atmosphere
Optical Properties of Chromophores with Different Six-Membered N-Heterocyclic Aromatic Ring
Control Strategy and Simulation Analysis for Auto Electric Power Steering System
Research on Heat Transfer Enhancement of Shutter Baffle Heat Exchanger
The Structural Design of Nozzle in Outer Mixing Mode for Preparing Superfine Particles by SCF Technology
Numerical Investigation of Dusts Removal from Tramway Surface by Street Vacuum Sweeper
Multi-Layer Pressure Vessel Contact Analysis
Reliability Assessment of Pipeline in Uniform Corrosion Conditions
Effects of Cd and Cd-Cu Doping on the Microstructure and Electrical Properties of NiMnCoO NTC Ceramics
N-Doped TiO2 Hollow Spheres with Enhanced Visible-Light Photocatalytic Activity for Water Purification
Manufacture and Application of High Efficiency Boiling Tube for Heat Exchanger
An EIS Study of the Corrosion Behavior of Arc Spraying Al-RE Coating in Salt Spray Test
A Novel Strategy to Prepare PMOs with High Loading of Organic Species by Releasing Organic Precursor
Numerical Study of Large Diameter Butterfly Valve on Flow Characteristics
Influence of Catalyst for Synthesis of Carbon Nanofibers from the Flame
6 Nano Biochemistry and Nanomaterials
Synthesis of Nitrogen-Doped ZnO Nanocrystallites and its Novel Catalytic Activity on Ammonium Perchlorate
Preparation and Characterization of Cerium Hexaboride Nanometer Powders by Combustion Synthesis
Synthesis and Photocatalytic Property of Cu3V2O8 Prepared by Liquid Phase Precipitation
Study on Pyrolysis Behavior of Yttrium Oxalate and Kinetic of Yttria Grain Grown
Study on Synthesis Nanomicrostructures of Zinc Borate (Zn3B6O12*3.5H2O) with Different Morphologies
Preparation and Properties of Cage-Like Octaaminopropyl Polyhedral Oligomeric Silsesquioxane/Polyvinyl Alcohol Hybrid Materials
Facile and Scaled-Up Synthesis of Inorganic Metallic Ions Doped Nanoscaled Titanium Dioxides and their Enhanced Photocatalytic Property for Phenol Degradation
Preparation of Tetracycline Microparticles Based on Supercritical Fluid Technique
Solvothermal Synthesis of Bi2Se3 Hexagonal Nanosheet Crystals
A New Preparation Method for Amorphous Co-B Alloys Nanoparticles
Synthesis of Semi-Terminated Silica Nanotubes
Electrical and Mechanical Properties of Carbon Aerogels / Phenolic Resin for Nanocomposites
Isolation of Triterpenoids from Catunaregam spinosa
Research on Solubilization of Single-Walled Carbon Nanotubes by Functionalization
Influence of Reaction Parameters on Synthesis of Silver Palmitate with Double Jet Method
Mechanical Properties of Secondary Wall and Compound Corner Middle Lamella near the Phenol-Formaldehyde (PF) Adhesive Bond Line Measured by Nanoindentation
Preparation of Gardenia Red Pigment by Hydrolysis of Geniposidic Acid with Co-Immobilized Enzyme
Effect of In Situ Surface Modificated Nano-Zinc Oxide on the Curing Structure and Property of Natural Rubber Conventional Vulcanization
Cathodic Polarization Behavior and Deposit Structure of Jet Electrodeposition Nickel
Study on the Preparation and Properties of PAA/BC/Na-MMT Composites
Core Cross-Linked Polyethylene Glycol Oleate Micelles as Novel Drug Carriers
Reducing Microbiological Adhesion on Aluminum by Using Silver Nanocrystals Encapsulated in Mesoporous Silica Nanoparticles
Synthesis, Characterization and In Vitro Anticancer Activity of Two Novel Series of Organotin Retinoates
Carboxymethy Chitosan Grafted Ricinoleic Acid Group for Nanopesticide Carriers
Antibacterial Properties of M3+-TiO2 Thin Films by RF Magnetron Co-Sputtering
Preparation of Genipin by Hydrolysis of Geniposide with Co-Immobilized Enzyme
One Step Synthesis of Europia Nanoparticles via Thermal Decomposition of Europium Propionate Crystals
Preparation and Process Optimization of LLDPE/EVA/Modified Nano-ZnO Composites
Growth of SiC and SiO2 Nanostructures Prepared from Rice Husk Ash Using Carbon-Metal Assisted
Photonic Band-Gaps in Porous Silicon Based Mirrors with a Ellipse Profile Refractive Index
Hydrothermal Synthesis of Monodisperse -Fe2O3 Nanoparticles
Preparation and Characterization of Vitamin a Palmitate-Loaded Nanostructured Lipid Carriers as Delivery Systems for Food Products
The Comparative Study of Two Kinds of Nano-Antimicrobials' Antibacterial Properties
Catalytic Behaviours of MCM41 with High Content of Copper in NO+CO Reaction
Influence of Surface Characteristics on the Dispersion of Modified Multi-Walled Carbon Nanotubes
Study of Parametric Effects on Aqueous Ammonia Process for Removal of SO2
A Novel Method to Immobilize Magnetic Nanospheres with Metal Ions for the Adsorption of Bovine Hemoglobin
Synthesis of Mesoporous Silica Coated Magnetic Microspheres on Large Scale
Optimum Parameters for Fining Extract of Garlic Soluble Solids with Acidic Silica and Bentonite
Optimization of Ultrasound-Assisted Extraction of Oil from Camellia(Camellia oleifera abel) Seed
Photoluminescence of Porous Silicon Doped with Europium Complexes
The Study on the Nutritive Components and Water-Soluble Protein Extraction of Juglans mandshurica Maxim Kernel
Synthesis and Characterization of Dual-Magnetic Thermosensitive Microspheres
Ordered Mesoporous SBA-15 for Controlled Release of Water-Insolube Drug
Influence of Extruder Conditions on Mechanical Properties of Polypropylene Nanocomposites Reinforced with Rice Straw Micro/Nano Fibrils
Synthesis of SiO2 Hierarchical Nanostructure on Carbon Nanowire
Explore on Pressure-Drop Performance of Nanofibrous Filtration Membrane
Preparation of Alginate/Silica Composite Beads with In Vitro Apatite-Forming Ability
Synthesis and Characterization of MFe2O4(M=Co,Ni) Nanoparticles
Preparation Cell Scaffolds with Well Defined Pore Structure Through Elastic Porogen/Pressure Filtration
Preparation of Silk Fibroin Microspheres
A Novel Way to Synthesize Mesoporous Silica Coated on the CNTs with Larger Holes Based on "MCM-41" CNTs@SiO2
Mineralization of a Bioactive Si-Ca-P System Wet Gel in Aqueous K2HPO4 Solution
Study on Preparation, Biological Activity and Thermal Decomposition of N-Benzoyl-N'-(4-Chlorobenzamido) Thiourea
The Competitive Growth of BiOI and BiSI in the Solvothermal Process
Investigation on Electronic Signals for Detection of Target DNA Molecule Based on Extended Gate FET Sensing Chip
Formation and Magnetic Characterization of Magnesium Oxide / Iron Nano Composite Particles
Gold Magnetic Particle Based Immunoassay on a Disposable Microchips
Reduction of Supercooling of Water by TiO2 Nanoparticles as Nucleating Agent
Effects of Annealing on Microstructure and Mechanical Properties of Bulk Nanocrystalline Fe3Al Based Alloy with 10 Wt. % Mn Prepared by Aluminothermic Reaction
Green Synthesis of Starch-Stabilized Silver Nanoparticles and their Antibacterial Properties
Preparation of Biodegradable Gradient Polymer by Microwave
Corrosion Behavior of MAO-Treated Magnesium Alloy in Hank's Solution
Preparation and Characterization of a Novel Fluorocarbon Nano Material
Chemical Synthesis of Ascorbyl Palmitate in [BMIM]BF4
Study on Value Chain Formation and Risks of High-End Oriented Nanomaterial Industry
Study on Synthesis of Preservative Benzyl Methyl Fumarate
Fractionation and Structural Characterization of Peach Kernel Proteins
Graphitic Carbon-Coated ZrC- and Co-Nanoparticles Synthesized by Pulsed Plasma in Liquid
Physical, Chemical and Structural Analysis of Phellinus Igniarius Polysaccharides
Kinetic Process of Purple Cabbage Pigment on Macro Porous Absorbent Resin
Nanosilver Detection and Digestion Method in Complex Matrix, such as in Juice and Milk
Effects of Na2SO4 Concentrations on Electrodeposition of ZnO Film
Solvothermal Synthesis of CeO2 Nanoparticles
The Influence Research of Cu2+ on CuXFe1-XO*Fe2O3 Magnetic Fluids
Synthesis of -MoO3 Microspheres Assembled by Nanorods in Room Temperature Ionic Liquids
Mechanical Properties of Elastomeric Terpolymer Nanocomposites Containing Nano-SiO2
Synthesis and Optical Properties of Hollow Spheres Self-Assembled by ZnO Nanocrystals
Miniemulsion Polymerization to Prepare Beta Cypermethrin Nanocapsule
Synthesis and Characterization of Biodegradable Aliphatic-Aromatic Copolyesters Nanocomposites Containing POSS
The Organic-Inorganic Complex Material Formed by {Mo154} and TTABr
Effect of Different Molar Ratios of Fenton Reagents on the Surface Modification of CNTs
Immobilization of CdS Nanoparticles on Ion Exchange Resin Microspheres and their High Sensitivity to Pb2+ Ions
Characteristics of Konjac Glucomannan (KGM) in A.bulbifer Compared with that in A.rivieri and A.albus
Study on the Isolation and Purification of Proanthocyanidins from Rhodiola Rose by Macroporous Adsorbent Resin
Cure Kinetics of Epoxy/DDS/ Epoxy-Grafted Nano-Aluminum Oxide
The Improvement of Mechanical Properties of Polyurethane Coating by Multi-Walled Carbon Nanotubes
The Inhibitory Effects of Fucoidans from Laminaria japonica on Oxidation of Human Low-Density Lipoproteins
Headspace Solid-Phase Microextraction for Ethyl Carbamate Determination in Table Wine Samples
Synthesis Conditions of Nano-Hydroxyapatite Using Chondroitin Sulfate by Co-Precipitation Method
Photocatalytic Degradation of Eosin B by ZnS Nanoparticles under Visible Light
Structural Analysis of the TiO2 Thin Films Prepared by Electrochemical Oxidation Using a Two-Step Potential Applying Mode
Formation of Nanoporous Gold by Chemical Dealloying of an AlAu Intermetallic Compound
One Simple Approach to Prepare Size-Tunable ZnS Nanocrystals by Electron Sputtering
Preparation of Cu2O-TiO2 Nanocomposite in Ethylene Glycol System and its Photocatalytic Activity under Visible Light Irradiation
Electric Characteristics of MgO-Doped TiO2 Nanocrystalline Film in Dye-Sensitized Solar Cells
Synthesis of Nanosized HMS Mesoporous Molecular Sieve in an Ionic Liquid-Water Mixture
Extraction, Purification and Antioxidant Activity of Intracellular Polysaccharides from a Strain of Lachnum sp.
Identifying Time-Dependent Drug Diffusion Parameters in the Cylindrical Tube by Optimal Algorithm
Nano-Scale Deposition of Hydroxyapatite on Bioactive and Bioinert Fibers Using Carbon Nanofibers as Templates
Characterization and Structure of Ni-AlN Nanocomposite Layers Fabricated by Pulse Electro-Deposition 19
Synthesis of MoO3 Nanorods by a Solution Method
Study on the Mechanism of Enhancing Oil Recovery by Molecular Film Displacement
pH-Controlled Drug Release from Mesoporous Silica Spheres with Switchable Gates
Rapid Purification of Anti-SARS-CoV Protein N Monoclonal Antibody by Using Magnetic Beads
The Role of Crystal Control Agent in the Formation of Needlelike Calcium Carbonate Nano Particles
Magnetism Driven by Intrinsic Defect in GaN Nanowires
Decoloration of Methylene Blue Via Mesoporous Silica Microspheres Doped with TiO2
Study on Modification of the Banana Peel in the Extrusion
Predicting the Bending Size Dependency in Polymer Nanofiber Elasticity
Synthesis and Characterization of Missile-Like ZnO
Modeling the Tensile Size-Dependency in Polymer Nanofiber Elasticity
Microstructures and Mechanical Properties of Bulk Nanocrystalline Fe3Al Materials With 5, 10 and 15 wt. % Cu Prepared by Aluminothermic Reaction
Rheological and Flocculated Properties of Silver Nanoparticles Paste
Study on the Influence of Ultrasound on the Sulphitation and Neutralization Process in Cane Juice
Preparation of Vitamin E Liposomes by the Thin Film Method and Study on its Leakage Rate
Fabrication and Optical Properties of Mn Doped ZnS Nanowires
Preparation of Water-Dispersible Nanoparticles by Self-Organization of Bio-Based Photo-Reactive Polymer
Influence of Post-Treatment with Methanol Vapor on the Properties of SF/P(LLA-CL) Nanofibrous Scaffolds
A Stretched Carbon Nanotube with a High-Density of Topological Defect
7 Food, Medicine and Biomedical Engineering
Effect of PH-Shifting Treatment on the Biochemical and Thermal Properties of Myofibril Protein
Application of Soluble Membrane Filter in Simultaneous Determination of Trace Levels of Cadmium, Copper, Lead and Zinc in Food Additives by Inductively Coupled Plasma Atomic Emission Spectrometry
Crystal Structure of Acontine-4, 8, 9-Triol-19-Ethyl-1, 14, 16-Trimethoxy-4 -[2-(acetylamino)benzoate] Adulterated Copper Chloride C32H45N2O8CL2Cu
Research on Synthesis Processing of Microcapsule Wall Material with Emulsion Crosslinking Method
Study on Flavonoids from the Peony Leaves by Ultrasonic Extraction
Application of Gelatin-Based Antimicrobial Edible Coatings on the Preservation of Chicken Meat and Prepared Products
Experimental Study on the Early Shrinkage-cracking Property of the Polypropylene Fibe Concrete
Characterization, Physical Stability, and Dissolution Behavior of Naringenin / Mannitol Solid Dispersions Prepared by Solvent Evaporation Method with Three Drying Methods
Applications of Computational Fluid Dynamics(CFD) in the Food Industry
Optimization of Reaction Conditions of Octenyl Succinic Anhydride Potato Starch and its Morphology, Crystalline Structure and Thermal Characterization
Real-Time Interactive Multi-Resolution Watershed Model
Effect of Emulsion Type Sizing Agents on the Properties of Carbon Fiber and Carbon Fiber Reinforced Polymer Matrix Composite
A Systematic Investigation on the Preparation of 2, 6-Diamino-3, 5-Dinitropyridine
Effects of Lycopene on Oxidative Stability of Soybean Oil
Antimicrobial Activity of Microencapsulated Cinnamon Oil and Its Application on Cherry Tomato
Antioxidant Pathways and Chemical Mechanism of Curcumin
Preparation and Characterization of a Novel One-Component Polyurethane
The Residual Life Estimation of Thermo-Mechanical Fatigue of Coke Tower
Response Surface Methodology for the Optimization of -Amylase Production by Bacillus subtilis ZJF-1A5
The Flow Pulsation Analysis of an External Gear Pump
Study on Synergistic Antimicrobial Effect of Origanum Vulgare L and Forsythia suspensa Essential Oils
Strengthening in CNT-Al Composites Produced by High-Energy Ball Milling
Optimization of Preparation of Sweet Potato Starch Phosphates of High Paste Stability by Response Surface Methodology
Inducement Expression and Synthetic Dyes Decolourization Capacity of CotA
Tenderization of Goose Meat by Papain, Pineapple Juice and Ginger Juice Treatment
Polymer Cement Waterproof Coating and its Properties (II)
The Preparation of (E)-Resveratrol Nanoemulsion and In Vitro Release
Effects of Polyphenols from Sugarcane Tip on the Stability of Peanut Oil
Free-Radical Scavenging Capacity of Sasanquasaponin from Camellia Oleifera Abel
Chitosanase Immobilization Using Composite Carrier of Sodium Alginate/Cellulose
Synthesis of Novel Drug Benvitimod
Study of High Voltage Electric Field on the Mechanism of Horseradish Peroxidase Activity
Preparation and Properties of Thermosensitive 5-Fu-ACS Hydrogel
Effect of High Oxygen Modified Atmosphere Packaging on Browning Characteristics of Fresh-Cut 'Fuji' Apple
Analysis of Main Flavor Substances of Low- and Full-Fat Cheese Fermented by Lactobacillus acidophilus during Ripening Process
Spectroscopic Studies on the Interaction between Salvianolic Acid a and Human Serum Albumin
Mathematical Treatment and Model Development of the Solvent Effect in Curcumin Extraction Kinetics
Study of Control for Phenol and Chlorophenols Sudden Pollution in Drinking Water by Using PAC Adsorption
Separation of Carotenoids from Physalis Alkekengi var. Francheti through Supercritical CO2
Polymer Cement Waterproof Coating and its Properties(I)
Preparation, Characterization and Evaluation In Vitro of Naringenin-PVP K-30 Solid Dispersions
FEM Simulation of Elastic Properties of Closed-Cell Starch Extrudate with Spherical Pores
Evaluation of Wondfo Chlamydia Trachomatis Rapid Diagnostic Cassette Based on Nano-Gold Immunochromatography Gssay(GICA)
Optimization of Alcoholic Fermentation from Apple Juice by ACA-Immobilized Saccharomyces cerevisiae Cells
Study of the Effect of Electric Field on Superoxide Dismutase Activity by Spectroscopy
Analysis of Starch Bubble Breakage during Extrusion Expansion by Finite Elements Method
Isolation and Identification of a Mold Strain Producing Esterifying Synthetase and Study on its Metabolies
Life Problem Analysis on PPS Filter Application of Bag Dedusters in Coal-Fired Power Plants
Progress in Enzymatic Membrane Bioreactor: A Review of Research Methodology and Reaction Characteristic
A Novel Processing Technique for the Production of Instant Rice Noodle with a Long Shelf-Life
Determination of Vitamin C by Infrared Spectroscopy Based on Nonlinear Modeling
Discussion of Paleocene-Eocene Boundary of SanShui Basin
Fixed Speed Release System: Huperzine a Loaded Microspheres in Thermosensitive Methylcellulose Based Hydrogel
Characteristics of Piperine Solubility in Multiple Solvent
Research on Extraction of Proanthocyanidin from Peanut Skin by Aspergillus niger Fermentation
Dry Characteristics and Kinetics of Explosion Puffing Dried Crispy Winter Jujube at Different Vacuum Drying Temperature
Synthesis of Phytosterol Esters of Oleic Acid by Catalysis of Zr(SO4)2*4H2O under Solvent-Free Condition
Studies on Oxidative Stability of Microencapsulated Oils Rich in Polyunsaturated Fatty Acids
Study on the Adsorption of Mixed Cd(II) and Pb(II) Ions by N,O-Carboxymethyl-Chitosan
Effect of Different Maceration Levels on the Antioxidant and Bioavailability of Wine from Vitis vinifera Cv. Muscat Hamburg
Optimization of Brewing Process of Low-Alcohol Litchi Wine and its Influence on Volatile Compounds
Study on the Leaching of Sodium Nitrate from Nitratine
Antimicrobial Activities of Extracts of Apocynum venetum Fibers
Latrunculin a Enhances the Parthenogenetic Developmental Potentials of Electrically Activated Porcine Oocytes Matured In Vitro
Recovery Leaching of Niobium from Metallurgical Residues
Effect of Ultrafine Pulverization on Properties of Apple Pomace Powder
Antioxidant Activities of the Pyroligneous Acid in Living Caenorhabditis Elegans
Synthesis and Potent Biological Activity of 1-Sulfonyl Substituted Imidazole and Benzo[d]imidazole Compounds
Adsorption Behavior of L-Histidine on a Novel Spherical Chitosan Adsorbent
Chemical Composition of Broussonetia Papyrifera Flowers
Technology Optimization on Preparation of Peanut Polypeptide Using Alcalase
Optimization of Ullmann Reaction Step in the Synthesis of Sertindole
The Research on Freeze-Thaw De-Emulsification Technology in Enzyme-Assisted Aqueous Extraction Processing
Extraction and Separation of Angiotensin-Converting Enzyme Inhibitor from Enzymatic Hydrolysate of Oyster
Study on Antibacterial Substances Extraxted from Natto
Investigation on Material under Accelerated Simulator Environment in Laboratory and Tropical Marine Environment of Aircraft Structure
Analysis and Experimental Study on Stability of Nonlinear Rotor-Bearing System
Analysis of Flavonoids in Acanthopanax by UV-Vis Spectrophotometry with Comparative Study on Different Extraction Technologies
Antioxidant Activity of Flavonoids from Sweet Potato Vines In Vitro
Synthesis and Application of Poly-Allyl-Imidazolium Ionic Liquid Stationary Phase in Capillary Gas Chromatography
Comparison of Volatile Compounds in Pepper (Piper nigrum L.) by Simultaneous Distillation Extraction (SDE) and GC-MS
Effects of Frozen Storage Time on the Functional Properties of Frozen Wheat Gluten
Pressurized Microwave-Assisted Extraction of Total Isoflavones from Pueraria Lobata
Effects of Improving Ripening Temperature on Gouda Cheese
Numerical Simulation of Instantaneous Flashing LPG Release
Experiment Probe on Micro-Electric Field Effects on Seepage in Micro Particle Clays
Preparation and Controlled Release Analysis of Patchouli Oil Complex Microcapsules
Optimization of Adsorption Technology of Chitosan with Paralytic Shellfish Poisoning (PSP) by Response Surface Methodology (RSM)
Synthesis and Characterization of a Novel Interpenetrating Polymer Networks of Polydicyclopentadiene/Polystyrene
The Crystal Behaviors of Shortenings Made from Lard and Palm Oil
Study on Durability of Engineered Cementitious Composites
Preparation of Xanthan Gum-G-N-Vinylpyrrolidone by Radiation and Adsorption Property of Phenol and Polyphenol
Purification of Hulless Barley Anthocyanins with Macroporous Resins
Material Basis of Germination of Salvia miltiorrhiza Bge Seeds
Study and Utilization of Heat Pump Air Condition System in Oil-Gas Gathering and Transferring
Proton Exchange Membrane Fuel Cell(PEMFC) Heat Transfer Model and Dynamic Heat Response Analysis
Studies on the Logistics Optimization of Flywheel Workshop
Simulation for Silos Discharge with 2D DEM
Simultaneous Separation and Determination of Vanillin and O-Vanillin by CE Compared with HPLC
Determination of Prednisone Acetate at Trace Level by Flow Injection Analysis with Tris(1,10-Phenanthroline) Ruthenium(II) Chemiluminescence Detection
Effects on Flavor Compounds of Radialized Provolone Cheese
Effect of Seasons on Volatile Compounds of Dorsal Meat in Grass Carp
Study on Biodegradable Implant with Poly (l-Lactic Acid) and its Releasing Character In Vitro
Production of Koji by Black-Skin-Red-Koji
Study on Influence of Different Desulfurization Methods of Apple Slice
Study on Ultrasonic Extraction of 1-Deoxynojirimycin(DNJ) and Polysaccharides from Mulberry Leaves
Kinetic Model of Atractylodes Processing
Effect of Polyolefin Film on the Quality of Kiwifruit with 1-MCP Treatment in Modified Atmosphere Packages
A Statistical Experimental Design to Plastein Synthesis with the Mixture of Soy Protein Isolate(SPI) Hydrolysate and Whey Protein Isolate(WPI) Hydrolysate
Effect of Cross-Linked Acetylated Starch and Native Starch on the Rheological, Microstructure and Sensory Properties of Apple Jam
Kinetics on the Extraction of Polyphenol from Infructescence of Platycarya strobilacea sieb. et zucc
The Tip Field of Mode III Crack in Damage Material
Synthesis and Characterization of Novel 4-Hydroxy-(4-solanesylaminophenyl ) Retinoate
Effect of Split Ratio in Determination of OCPs in Traditional Chinese Medicines Using Gas Chromatography
The Study of Multiplex PCR Conditions for Detection of Three Food-Borne Bacterial Pathogens
Study on the Synthesis of Carboxymethylpachyman in the Aqueous-Ethanol Medium with the Assistance of Ultrasonics
QSRR Study on GC Retention Time of Volatile Components from Hawthorn Perfume
Development of Direct Competitive ELISA Kit for the Detection of Tetrodotoxin Using HRP Labeled Antigen
Preparation and Characterization of Anti-HIV Drug TD0232-Loaded Microemulsion
Study on Cashmere Fibers Shrink-Proofing by Enzyme Based on Fuzz Mathematics Method
Study on One-Step Solid-State Fermentation of Soybean Meal
Antioxidant Activities of Cold Water Extracts from Hohenbuehelia serotina and Armillaria mellea
The Experimental Study on Vibration Packing Density of Molecular Sieve
Microstructure and Phase Stability of Sintered Hydroxyapatite-Zirconia Composites
Effect of Catfish Bone Hydrolysate Addition to Milk in Yogurt Manufacturing
Textural Attributes of Pork Longissimus Muscle Injected with Marbling-Like Emulsified Lipids
Oxidative Stability of Pork Longissimus Muscle Injected with Marbling-Like Emulsified Lipids
Technical Principle of Integrated Solidification and Cementation at Cement-Formation Interface with Mud Cake to Agglomerated Cake (MTA) Method and its Oilfield Application
The Effect of Technical Parameters on Lycopene Extraction in Supercritical Fluid Extraction From Freeze-Dried Tomato Pomace (Peels and Seeds)
The Research of Chromatography Media in Separating and Purifying the Gangliosides of Porcine Brain
Effects of Transglutaminase on Rheological and Film Forming Properties of Fish Gelatin
Respiration Model of Agaricus bisporus under Modified Atmosphere Packaging Based on Enzyme Kinetics
Effect of Catfish Bone Hydrolysate on the Quality of Catfish Sausage During Ambient Temperature (37 DegreesC) Storage
Antioxidative Activity of Protein Hydrolysates from Spanish Mackerel by Alcalase
Study on the Interaction of Gingerol and Sudan Dye
Numerical Simulation and Study about Partial Ossicular Replacement Prostheses with Several Various Materials on Hearing Restoration
Expression, Purification and Characterization of Recombinant Human Gelatin in Pichia pastoris
Inhibition Mechanism and Kinetic Model for Ozagrel on Mushroom Tyrosinase
Preparation and Characterization of Azithromycin-Loaded Nanostructured Lipid Carriers
Effects of Lysozyme and Nisin on Fresh- Keeping Refrigerated Fillets of Fresh Ctenopharyngodon idellus
Extraction and Partial Characterization of Pepsin-Soluble Collagens from the Skin of Amiurus Nebulosus
Recognition of c-Myc Tagged DNA Plasmid Based on LSPR Optical Biosensor Assembled with Silver Nanoparticles
Effect of Chlorine Dioxide Gas Treatment on Surface Sterilization of Grape
Studies on Total Flavonoids Extraction from Perilla using Ultrasonic-Assisted Extraction
Studies on the Fermentation Technics of Dry Wild Jujube Wine
Study on the Purification of Longan Seed Flavonoids by Macro-Porous Resin
The Antibody Preparation of Human-Like Collagen
Characterization of GTMAC-Graft-Chitosan as a Bactericidal Agent for Nitric Oxide Release
Effect of Mechanical Damage on the Potato's Nutrients with Various Distance
Optimal Conditions for Extraction of Oil from Fenugreek (Trigonella foenum - graecum L.) by Supercritical CO2 Fluids (SFE-CO2)
8 Other Related Fields
Effect of Pre-Treatment Palm Oil Mill Effluent POME on Biohydrogen Production by Local Isolate Clostridium Butyricum
Preparation of Guanidine Derivative Polymers as Novel Functional Additives for Value-Added Hygiene Paper
Evaluation of the Influence of Acid Rain on the Property of Plant Mediums by Simulation
Property Evaluation of Polypropylene/Glass Fiber Complex Braids under a Base/Salt Environment
Preparation of Amorphous Nano-Sized Ni(OH)2 with the System of Tween-80/n-C4H9OH/c-C6H12
Catalytic Pyrolysis of Sewage Sludge
Study of Dyestuff Removal from Solution by Sunflower Seed Husk
Chemical Mechanical Polishing of Cu Pattern Wafer Based Alkaline Slurry in GLSI with R(NH2)n as Complexing Agent
Effect of Thickness on GLAD TiO2 Thin Films with Incline Spinning Substrate on Rotating Holder (ISSRH) Technique
Synthesis of Eu 2+ and Dy 3+ Codoped Ba2MgSi2O7 Phosphor for Energy Storage
Viscosity of Three Biodiesel Fuels: Experimental Data vs. Prediction Models
Synthesis and Crystal Structure of 13-cis-Retinoate Aryl Derivatives
Promoting Effect of Metal Promoters on Fe(II)-Zn-Based Double Metal Cyanide Complex Catalysts for Biodiesel Synthesis
Carbon-Supported Gold Catalyst Modified by Doping with Ag for Cyclohexene Oxidation
Young's Modulus of Graphene Based on Finite Displacement Theory
The Controllable Preparation of Aluminum Borate Nano-Materials
Study on Anodizing Processes for Formation of Nano Porous Aluminum Oxide Thin Films
「Nielsen BookData」 より