Advanced materials : selected, peer reviewed papers from the International Conference on Chemical Engineering and Advanced Materials (CEAM 2011) 28-30 May, 2011, Changsha, China

著者

• International Conference on Chemical Engineering and Advanced Materials
• Cao, Zhong

書誌事項

Advanced materials : selected, peer reviewed papers from the International Conference on Chemical Engineering and Advanced Materials (CEAM 2011) 28-30 May, 2011, Changsha, China

edited by Zhong Cao ... [et al.]

（Advanced materials research, v. 239-242）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This work aims to bring together the latest advances in, and applications of, chemical materials and equipment, sensors and sensor materials, energy materials technology, materials protection technology, materials processing technology, functional materials, etc. A useful and timely review of the subject.

目次

Preface and Organizing Committees 1 Chemical Materials and Equipment Effects of Alloying Elements on the Microstructure of 22CrMoH Gear Steels Billets Effects of Annealing Parameters on Recrystallization of AZ31 Magnesium Alloy Processed by Continuous Rheo-Extrusion Performance of BaCo0.7Fe0.2Nb0.1O3- Membrane under CO2-Containing Atmosphere for CCS Application Water Permeates in Ceramic Membrane Modified with Nano Inorganic Coating Facile Synthesis of Multifunctional Nanocomposites with Tunable Luminescent and Magnetic Properties Wear Characterization of Thermal Sprayed and Fused Fe-Ni-Cr Alloy Coatings with the Addition of CeO2 The Preparation, Characterization, and Photocatalytic Activities of Co-TiO2 Structure Evolution of the Atomized Powders of Fe-25Cr-3.9C Alloy with Addition of Ni and B Elements Annealing Treatment for Superplastic Forming of Twin Roll Casted AZ31 Magnesium Sheet Effect of Modified Graphene Addition on the Electrical Properties of Epoxy Resin Composite Synthesis and Properties of Potassium-Containing Poly(Acrylic Acid Sodium-Co-Acrylamide)Fly Ash-Illite Superabsorbent Composite Synthesis and Electrical Properties of End-Functionalized Poly(N-Isopropylacrylamide) with -Cyclodextrin and its Ferrocene Inclusion Complex Role of Crystallitic Carbon in the Preparation of Mg-Based Hydrogen Storage Materials by Reactive Milling Study on CO2 Laser Surface Hardening of 17-4PH Stainless Steel Effect of V2O5 and ZnO Additives on the Sintering Temperature and Microwave Dielectric Properties of Ca[(Li1/3Nb2/3) 0.8Ti 0.2]O3- Ceramics Preparation and Characterization of Yttrium Oxide Coatings by Plasma Spraying Improved Photocatalytic Activity of La3+-Doped Bi2O3 Clamping Accuracy Detection and Display System of Integral Turbine-rotor in Molecular Pump Preparation and Electrochemical Characteristics of Activated Carbon Micro-Spheres for Electric Double Layer Capacitor Effect of ECAP on the Electrochemical Behavior of Chromium Bronze Preparation and Characterization of Wheat Straw MCC Characterization and Magnetic Properties of Nanocrystalline Nickel Ferrite Synthesized by Carbon-Adsorb Auto Combustion Method Analysis of Low Velocity Dense Phase Pneumatic Conveying System to Extend System Conveying Capability Studies on Microstructure and Property of Material of SiCp/Gr/ Mixed and Reinforced Aluminum-Based Composites Prepared by Semi-Solid Pouring Method Effects of Gd and Er on the Ignition-Proof Properties of Magnesium Alloy The Effect of Be and Mn Co-Doping on the Magnetic and Transport Properties of Ferromagnetic Semiconductor Thin Films Effect of Sintering Temperature and Atmosphere on Corrosion Behavior of MIM 316L Stainless Steel Choice of Electrode Material for Detecting Low Frequency Electric Field in Sea Water Manufacturing Technique and Property Evaluation of Polypropylene/ Carbon Fiber Composite Braids Study on the Preparation and Properties of Multiwall Carbon Nanotube Reinforced Biodegradable Polymer Blend Porous Silicon Modification with ZnO Films Electro-Deposited from Zinc Nitrate Aqueous Solution by Pulsed Current of Rectangular Wave Urea Reactor Explosion Accident Stress Corrosion Analysis Kinetics of -Chloronitrobenzene Hydrogenation on Palladium/Carbon Catalyst 2 Sensors and Sensor Materials Indentation Responses of Functionally-Graded Al2TiO5- Based Ceramics Comparative Study of Pretreatment and Maturing Methods on the Preparation of Cellulose/Magnetic Nanocomposites Solid Super Acid of S2O82- /FexOy-CuOx Catalytic Degradation of Orange IV Effect of Fluoride Treatment on Corrosion Property of AZ31 Magnesium Alloy in Hank's Solution Study on the Mechanism and Properties of Activated Crumb Rubber Modified Asphalt Magnetic Properties of Iron-Based Alloy Nanowires upon Heat Treatment Preparation Mico/Nano Composite Particles and their Applications for Dye-Sensitized Solar Cells Microstructures and Interfacial Reaction of CrON Diffusion Barrier in the NiCrAlY-CrON Duplex Coating System during Thermal Treatment Studies of the Conversion Coatings Formed by Combined Use of Lanthanum Salt and Benzotriazole on Commercial Brass Nanoscaled Polyaniline Doped with Different Dicarboxylic Acids Based On Template-Free Method Oxygen Delignification of Bamboo Kraft Pulp with High Kappa Number The Continuous Plating of Ni-Cr Composite Coatings and TiO2 Nano-Modify A Rheological Study of Carbon Black Suspensions and Determination of Significant Factors Affecting the Slip Flow in In-Mold Coating (IMC) Using Design of Experiments Effects of Solution and Ageing Treatment Process on the Microstructure and Properties of AZ80 Magnesium Alloy Preparation and Performance of Zinc Zeolite-Ce/TiO2 Antibacterial Material Effect of B Boping Concentration on the Properties of P-Type Hydrogenated Amorphous Silicon Thin Films Hydrothermal and Thermal Decomposition Synthesis of Hierarchical NiO Microspheres with Mesoporous Structure Impact Damage Monitoring of Laminated Composites using FBG Sensors Preparation and Characterization of Nafion-Zirconia Composite Membrane for PEMFC The Influence of Ply Design and Thermal Fatigue on Mechanical Property of Glass Fiber/Epoxy Composite Study of Pt Nanoparticles Protected by 1-Dodecanethiol Self-Assembled Films on Iron Surface Using Electrochemical Methods,UV-Vis and XPS Measurements Preparation and Characterization of Formaldehyde Crosslinked Chitosan A Biomimetic Sensor for Fast Lysozyme Detection The Effect of Nano-Modification on Performance of Cast Polypropylene Film Luminescent and Thermal Properties of Eu3+ Complex with Salicylic Acid and o-Phenanthroline Trapped in Sol-Gel Glass A New Tool Wear Modeling Method Based on Project Pursuit Regression Preparation and Properties of LiFePO4 Cathode Material for Lithium Ion Power Battery A Study on the Reduction of HCN in Cigarette Smoke by Loading Cuprous Oxide on the Surface of Activated Carbon Fabrication of Zn-Se/Stainless Steel Thin Films by Ultrasonic Electrochemical Deposition and its Application Analysis and Research of PPTA Erosion of the Ultrasonication Preparation of Stoichiometric TiNx Films by Laser CVD with Metalorganic Precursor Polyaniline/nano-in2O3 Composites Used as a Sensitive Material to NH3 Selective Binding of Nucleobases and its Electrochemical Behavior at Glassy Carbon Electrode in PBS at pH 7.4 Preparation and Photocathodic Protection Properties of NiP/TiO2 Bilayer Coating on Low Carbon Steel Effect of Trace Yttrium on Properties and Microstructure of Cu-0.6Cr-0.15Zr-0.05Mg-0.02Si Alloy Investigation on the Permeability of Electric Arc Spraying Sealing Coat with Nano-Sized TiO2,SiO2 of Steel Structures Adsorption Behavior and Inhibition of N,N-Diethylammonium O,O'-Dicyclohexydithiophosphate for Carbon Steel in Acid Medium Microstructure and Mechanical Properties of Mg-Y Alloys Synthesis of YVO4 Nanoparticles with Controllable Morphologies by Solvothermal Method Study on Poly-Si Thin Films by Vacuum Evaporation Study on the Adhesion Properties of Protective Films to the Magnetic Refrigerant Material Determination of Two Organophosphorus Pesticides Using Electrochemical Sensor in Water Samples 3 Energy Materials Technology Preparation and Characterization of Nanocrystalline Ce-Containing Layered Double Hydroxides A Method about the Worn Materials Applied to the Marine Mechanical and Electronic Equipments in Condition Monitoring Process Structure and Properties of Bi-Shrinkage Yarns Spun by one-Step Spinning Process Microstructural Study on Ni-Based Alloy Coating on Plain-Carbon Steel Substrate by Hot Dipping Process A Method of Improving Limiting Drawing Ratio:Differential Temperature Deep Drawing Based on Superplasticity Finite Element Study on Temperature Distribution of Curing of Fully Enclosed Adhesive Joint Method Study of Improving Surface Corrosion Resistance of 6063 Aluminum Alloy Diallyl Orthophthalate(DAOP) Resin as a Reactive Plasticizer for Optimizing Glass-fiber/PVC Interface and Reactive Kinetics Effect of Si Addition on the Microstructures and Mechanical Properties of TiAl Intermetallics Study of Friction Stir Spot Welding of Steel/ Magnesium Buckling Behavior of FGM Elastic Arches Subjected to Uniformly Distributed Radial Follow Load Influence of Gadolinium Addition on Electrochemical Properties of Magnesium Sacrificial Anode Study of Lost Foam Casting of Reaper Underpan The Optimum Technological Parameters and Properties of LDPE/LLDPE/Nano-Mg(OH)2 Systems Effect of the Content of Paraffin Microcapsule on the Thermal Performance of Infrared Camouflage Coatings The Study on the Carbon Deposition in H2-CO Mixtures A Comparative Study of Corrosion Related Electro-Magnetic Field Control Effect Hydrogen Bonded Side Chain Liquid Crystallines Based on Poly(4-Vinylpridine) Thermal Decomposition of Wood Treated with Silicates by Thermogravimetry-Mass Spectrometry The Preparation and Application of the Cationic Biopolymer Based on Xylan-Rich Hemicelluloses from Agricultural Biomass Luminescence of Ce 3+ or Tb 3+ in Lithium-Barium-Gadolinium-Aluminosilicate Oxyfluoride Glasses Microstructure and Texture Evolution during Equal Channel Angular Extrusion of Pure Copper: Effect of Strain Rat Changes of Dynamic Viscoelastic Properties of Tamarind Gum Aqueous Solutions Preparation and Magnetic Properties of Ce-Doped Strontium Ferrite Films Piezoelectric Properties of PZT-5 Fiber/Epoxy Resin 1-3 Composites Effect of Cold Rolling on Thermal Stability of Zr 55 Al10Ni5Cu30 Bulk Metallic Glass Preparation and Characterization of Two New Kinds of Soluble Quaternary Ammonium Salts of Chitosan A Comparative Study of Potentiostatic and Potentiodynamic Method in the Synthesis of MnO2 Films for Electrochemical Capacitors Study on the Mechanical Behavior and Microscopic Mechanism of Explosive Working of High-Manganese Steel Study on PTH/PANI/AC Composites as Electrode Materials for Supercapacitors Simulation Research of the Effect of Thermal Reflow Processing Parameters on the Profile of Micro-Spherical Structure Preparation and Characterization of Paraffin/PMMA Core/Shell Structured Microcapsules Preparation of Porous Carbon Film and its Application in Li-Ion Battery Electrical and Physical Properties of Sodium Potassium Niobates Thin Films Prepared by rf Magnetron Sputtering Technology Highly Sensitive Detection of Trace Hg2+ Based on Fine CdS Nanodots Grew from a DNA-Directed Alternate Dialysis Method The Preliminary Research on the Coating of FBG Embedded in Composites used in Large Aircraft Synthesis of Papercut-Like Carbon Sheets by a Simple Pyrolysis Method Calculation of the Viscosity of Zr-Based Metallic Glass Alloys Influence of Partial Substitution of Ba2+ for Sm3+ on the Structure and Electrochemical Properties of Sm 0.5-xBaxSr0.5Co0.8Fe 0.2O3- Perovskite Effect of Stress Concentration at Circular Hole Edge for Coating on Material Processing Electrochemical Analysis of the Fluorocarbon Anticorrosion Coating after Accelerated Weathering Environment Aging Corrosion of P110 Steel in Solutions Containing Different Chemical Compositions Photocatalytic Activity of SiO2/TiO2 Supported on Glass Fiber under Vsible Light Irradiation Microstructure of Copper Alloy Effects on Cavitation Damage Preparation of Foam Ni/Carbon Nanotubes Material for Enhanced Stationary Seal Ring Controllable Growth and Gas Sensitivity Properties of Zinc Oxide Nanocrystalline by Solid-State Reaction The Influence of Aluminum on the Electrochemical Performance of Zinc Alloy Anode Effect of Heat Flux on Combustion Performance of Glass Fiber Reinforced Epoxy Composite Waterproof Performance of Gypsum Products Preparation and Performance Test of Antistatic Agent for Polyurethane Seal Material in Mine Flocculants for Produced Water from Polymer Flooding in Daqing Oilfield Properties of White Light Emitting Eu2+ , Mn2+ Co-Doped Ca2SiO3Cl2 Phosphors Synthesized with Sol-Gel Method Nano-Crystalline Structure and Strengthening Mechanism of Nano-Diamond/Ni Composite Coatings by Brush-Plating Characteristics of Potentiodynamic Polarization Curves of Aluminum Electrodeposion Coating in Acidic Sulphate Solution Preparation and Characterization of -Cyclodextrin-Based Microcapsules for Sustaining Release of Jasmine Oil Theoretical Decomposition Voltage for Related Substance on Molten Salt Electrolysis Method to Remove Steel Surfaces of Sulfide Inclusions The Effect of Discharge Parameters on the Plasma Electrolytic Oxidation Film's Morphology Preparing of NiAl and Ni3Al Intermetallic Composite Coatings by Laser Cladding In Situ Synthesis Preparation of Cu2ZnSnS4 Treated with Post-Sulfurization in a Sulfur Vapor Atmosphere Study on Preparation and Properties of -NiOOH Maybe Absolutely Green - with Chinese Traditional Medicine as Wood Preservative Study on Urea-Sensitive Electrode Based Porous Silicon 4 Material Protection Technology Study of Brazeability of SiCP/A356 Composites and Aluminum Alloy Using Semisolid Metal with High Solid Fraction by Stirring Anti-Wear Coating Grown by Micro-Plasma Oxidation on Aluminum Alloys in the Solution of Aluminate-Titania Manufacturing of Micro Drill with Electrochemical Etching Mechanism and Protection of Stress Corrosion of Chemical Equipment Experimental Study of the Soundness and Compatibility of Baosteel Steel-Slag Powder Applied in Cement Concrete Processing Technique and Property Evaluation of Stab-Resistant Composite Fabrics The Electrical Conductivity and Infrared Properties of Ba-Doped SmCoO3- Composite Oxides Microstructure Study of Undercooled Hypereutectic Cu95Cr5 Alloys Phase Selection in Undercooled Cu85Cr15 Composites Preparation of Mesoporous Spherical Activated Carbons with Large Specific Surface Area from Ion-Exchange Resin Having Various Metals Surface Modification of the UHMW-PE Film Processing by Hot Compression Molding Study on Synergistic Scale Inhibition Performance of the Rare-Earth Permanent Magnetic Material and Polyaspartic Acid Research Progress on Preparation of Hierarchical Porous Oxides Derived from Wood Templates Inhibition of [NH2Et2][(4-MeC6H4O)2PS2] for Carbon Steel in Hydrochloric Acid Solution The Growth Process of the PEO Films under Escalating Voltage Waveform Effect of Charging Energy on Deposited Energy of Molybdenum Wires and Coating Properties by Wire Explosion Spraying Microwave Synthesis and Application of Cationic Bagasse Hemicelluloses Processing and Properties of GPTMS-TEOS Hybrid Coatings on 5083 Aluminium Alloy Research on Flame Retardance and Application of Magnesium Hydroxide Sulfate Whiskers to HDPE Synthesis and Magnetic Properties of Fe-Ni Alloy Nanoparticles Obtained by Hydrothermal Reaction Synthesis and Desulfurization Performance of Flower-Like ZnO Materials by Hydrothermal Homogeneous Precipitation Method Effect of Processing on the Dispersion of CNTs in Al-Nanocomposites Study on Organic Microcapsule Based Self-Healing Cementitious Composite Spatial Virtual Polarization Filter Design for Radar Sensor Microstructure and Property of Wear-Resistant Coating Layer by High-Frequency Induction Cladding on Mild Steel Surface Zinc Oxide Thin Films Grown on Nanostructured Al Thin Layer/Glass Substrate by RF Magnetron Sputtering Preparation and Chelating Properties of Polystyrene Modified Ethoxycarbonyl Thiourea Resin Effect of Stepped Solution Treatment on Microstructure and Properties of AA7085 Aluminum Alloy Study on the Weldability of S32205 Steel under Different Welding Processes Study on the Capacitance Performance of Activated Carbon Material for Supercapacitor Numerical Simulation Study of High-Speed Milling Thin-Wall Part Synthesis and Characterization of a Kind of Superparamagnetic Material Effect of Spew Fillets on Strength of Single-Lap Adhesive Composites Joints Optimal Design Method for Piezoelectric Sensors/Actuators Configuration Study on the Effect of Functional Monomer on the Binding Characteristics of Molecularly Imprinted Polymer Numerical Studies of Flow-Induced Defects in Aluminum Ingot Die Casting Process The Research of Soy-Protein - Acrylate Hybrid Emulsion Synthesis, Properties and Application in Optical Memory of a New Type Diarylethene with Benzene Ring Research and Characterization of Water and Oil Repellent Finishing Auto Interior Materials Synthesis, Optoelectronic Properties of a Novel Photochromic Diarylethene Bearing Phenyl and Thienyl Group Effects of Thermomechanical Treatment Process on the Microstructure and Properties of Al-Zn-Mg Alloy Adsorption Properties for Superabsorbent of Inverse Suspension Polymerization Poly(acrylate-Co-Acrylamide) Fabrication and Properties of Shape Memory Polyurethane Surface Modified Vapor Grown Carbon Nanofiber Composites Optimizing of Pretreatment Process of Electroless Ni-P Plating on Aluminum Substrate Microstructure Control of Co-Base ODS Alloys Facile Synthesis of Benzyl Alcohol Type Hypercrosslinked Resin The Probabilistic Compliance Methodology for Damage Tolerance Design of Thicker Composite Structure Study on Microstructure and Formability of Laser Tailor-Welded Joints of Aluminum Alloy Thin Sheet Effect of the Substrate Temperature on Crystalline and Optical Properties of ZnO Thin Films Prepared by CVD Hydrothermal Synthesis and Charaction of -Fe2O3 Mesocrystals and Nanorings The Ferroelectric and Electrical Properties of CaBi4Ti4O15 Thin Films Prepared by Sol-Gel Technology The Ferroelectric Characteristics of Ba(Zr0.1Ti0.9)O3 Thin Films under Post-Annealing Treatment for Applications in Nonvolatile Memory Devices Microstructure of In Situ TiB Reinforced Titanium Matrix Composite Coatings by Laser Cladding with Different Pre-Placed Powder Thickness Structure and Thermal Stability of Natural Rubber Reinforced with In Situ Generated Zinc Sorbate A Novel Elastomer Simulated Skin Applied in Measurement of Extravehicular Liquid Cooling Garment Study on Dynamic Heat-Moisture Comport Properties of Moisture Transported and Dry-Fast Fiber Effect of Electromagnetic Stirring Method on the Microstructure of an Al-Cu Alloy in Semi-Solid Screening Test of Phosphoric Acid-BTA Slurries for Copper ECMP Based on Static Inhibition Efficiency Solid-State Polymerization of 2,5-Dibromothiophene Derivatives and Properties of Corresponding Conducting Polymers Influence of the Second Phase Particle's Size Distribution on Grain Growth Based on Computer Simulation Improved Detection of Hg2+ in Aqueous Solution with High Sensitivity and Selectivity by Using Mercury-Specific DNA, Sybr Green I and Gold Nanoparticles Study on Mechanism of NC Sheet Metal Incremental Forming The Research of Chemical Resistance for Air Curing FEVE Fluorocarbon Coatings Phenyl-3-(1-Aniline)-1-Propene Schiff Base on N80 Steel in 15% HCl Solution The Wear Behavior of Electroless Ni-P/SiC Composite Coating Research on Core-Shell TiO2/Al2O3 by one-Step Hydrothermal Study on the Degradation in Vitro of Ciprofloxacin-Polyurethane Materials Investigation of Phase Composition and Microstructure of the FeAl/Al2O3 Composites Fabricated by Mechanical Alloying Process and Pressureless Sintering Process The Thermal and Electrical Transport Properties of Carbon Micro-Coil Characterization of Fe-C Alloy Film Optical Fiber Corrosion Sensors by Fractal Study of Anti-Aging Properties of Aerodrome Oil-Depots Camouflage Paint The Effect of Load on Friction and Wear Behavior of NBR and FPM under Dry Sliding Study on the Wear Resistance of Cast-Oozing Different Content of WC Sintering Temperature Effect on Ferroelectric and Piezoelectric Properties of Lead-Free Piezoelectric (K0.5Na0.5)NbO3 Ceramics Photocatalytic Activity of Bi2O3 Prepared by Different Precipitants Improvement on Oxygen Vacancies Effect of High Dielectric Constant (Ba0.7Sr0.3)(Ti0.9Zr0.1)O3 Thin Films Using by Plasma Treatment Photophysical Properties of Carbazole Derivative DPSPC Doped Composite Glass The Effect of Support on the Electrochemical Performance of Composite Electrode Materials for Supercapacit Study on the Properties of Ni-Cu-P Plated Polyester Fabric Emulsion Synthesis and Properties of Polyaniline Spherical Nanoparticles Curing, Thermal Properties and Flame Resistance of Tetrabromo-BPA Epoxy Resin/ Boron-Containing Phenol Resin Ordered Mesoporous Carbon/Cobalt Oxide Composites as the Electrode Materials for Supercapacitor Study of Interior Wall Coating Based on Metakaolinand Modified Starch Study of Sphere NC Sheet Metal Incremental Forming Electrochemical Deposition of Carambolalike Ytterbium Hexacyanoferrate(II) and its Application in Electrocatalysis Influence of Sm3+ and Gd3+ Co-Doping on Photocatalytic Activity of TiO2 Fabrication, Stress Relaxation Behavior and Bioactivity Evaluation of HA-316L Asymmetrical Functionally Gradient Biomaterial Study on Hydrogen Generation from Al Li/NaBH4 Mixture in Pure Water for Portable Fuel Cell Investigation of Physico-Chemical Properties and Microstructure of HA/316L Asymmetrical Functionally Gradient Biomaterial Study on the Mechanical Property of Cu-Filled Isotropically Conductive Adhesive/SiO2 Composites Study on Microstructure and Mechanical Properties of Ni/TiC Composites by Laser Induced Self-Propagating High-Temperature Synthesis Ablation Properties of C/C-ZrC-SiC Composites by the Precursor Infiltration Pyrolysis Formation of the Surface Oxide Film on as-Cast Mg-7Li Alloy Bulk-Quantity Synthesis of Ultralong SnO2 Nanowires and their Application to a Backgated Triode Emission Device Effect of Different Coiling Temperature on Mechanical Properties in Hot Rolled TRIP Steel Transparent Glass-Ceramics Derived from Spontaneously Crystallized Phosphosilicte Glasses The Properties of OMMT-PAN-Binary of Fatty Acids Blends as Phase Change Materials A New Schiff's Base Fluorescent Sensor for the Selective Detection of Mercury Ion Immobilization of Strontium Waste into Synroc by the Combustion Synthesis Application of High Volume Fly-Ash Concrete in Mining Roads Study on Synthesis of the High Aspect Ratios Nesquehonite Whiskers Catalytic Ozonation for the Degradation of p-Chloronitrobenzene in Aqueous Solution by Pumice Transparent Poly(methyl methacrylate)/TiO2 Nanocomposites for UV-Shielding Applications Improvement on Impact Strength of the Nylon 1010 Injection Products with Inlay 5 Material Processing Technology Preparation and Characterization of PP-g -GMS -St For PP/O-MMT Composite Materials The Preparation of Bioactive Glass Microspheres in W/O Emulsion Reactive Grafting of Glycidyl Methacrylate onto Poly (Ethylene-1-Octene) Manganese Silicate Catalyzed Ozonation of m-Chloronitrobenzene in Drinking Water Stress and System Energy in Erosion Process for Brittle Materials Engine Oil-dish Dies Design Based on CAE A Simple Way to Prepare C-doped TiO2 with Visible Light Photocatalytic Activity A New Type of Organic Ferroelectric Material Based on Maleopimaric Acid Anhydride Preparation and Characterization of Fe3O4-Pt/C Electro-Catalysts for Zinc-Air Battery Cathodes A Stable Biomimetic Superhydrophobic CuO Surface Prepared by a Facile and Inexpensive Environmental-Friendly Method Research on Effects of Inhibitors on Anti-Corrosion Performance of Reinforced Bar in the Concrete Preparation and Properties of Polyacrylonitrile / Binary of Fatty Acids Composites as Phase Change Fibers The Effect of Cr on the Microstructure and Wear Resistance of Fe-Cr-V-C Hardfacing Alloys Spinning Process and Mechanical Properties Analysis of PTT Filament Core Spun Yarn Transparent Polyimides and their ITO Flexible Conductive Film Corrosion Properties of Arc Spray Zn-25Al and Zn-50Al Coating in Marine Environment Research of Impact of Stray Current from Urban Rail Transit System on Buried Gas Pipeline Effect of Piezoelectricity on Nonlinear Free Vibration of Moderately Thick Laminated Piezoelectric Plates Solvothermal Synthesis of Nanostructured -Ni(OH)2/ Mesoporous Carbon Composites for Supercapacitors First-Principles Study on the Electronic Structure of N-Doped Orthorhombic SrHfO3 Pulse Electrodeposited Nanocrystalline Ni-W-Fe-La Alloys as Hydrogen Electrocatalytic Materials Effects of Trace Elements on the Formation of Spheroidal Graphite in Ductile Iron Microstructure and Mechanical Properties of In Situ Al2O3- Ti(C,N) Composites New Technology with Efficient and Energy-Saving to Prepare Semisolid Alloy Slurry Effect of Prior Deformation on Properties of Cu-Cr-RE Alloys Numerical Study on Controllable Multi-Band Microwave Metamaterial Absorbers Research on MIB Suface Modification of Cr12MoV Cold-Working Die Steel A Novel Anisotropic Electroactive Liquid Crystalline Polyimide Containing Aniline Trimer Segments Effects of Film Thickness on Microstructure and Ferroelectric Properties of Bi3.15Nd0.85Ti3O12 Thin Films Prepared by Sol-Gel Method Study of the Surface Morphology and the Microstructure of PAN-Based Carbon Fibers Study of the Molecular Hydrogen- Zeolites Interaction Biodegradable Behaviors of Mg-6%Zn-5%Hydroxyapatite Biomaterial Influence of Ultrasonic on the Property of Electroless Plating Ni-Cu -P Alloy Coating at Low Temperature Solvent Cutting to Make Superior Coal Tar Pitches Magnetic Characterization of SUS316L Deformed by High Pressure Torsion Electronic Structures and Optical Properties of CuIn1-XGaXSe2 by First-Principle Calculations Influence of Heat Treatment Condition on Low Cycle Fatigue Life of a Rolled AZ80 Magnesium Alloy Sheet Effect of Catalysts on Preparation of Sol-Gel Derived Si02 Antireflective Coating Experiment Research of Halogen-Free Flame Retardant System for Oil-Extended SEBS Optimization of Texturization on Monocrystalline Silicon Solar Cell Microstructure and Mechanical Behaviors of the New LAZ1151 Mg-Li Alloy Pervaporation Dehydration of Aqueous Ethanol Solution with Zeolite-Filled Poly (vinyl Alcohol) Composite Membranes Comparative Study on Corrosion Behavior of Zinc-Aluminum Coated Steel under Thin Electrolyte Layers Improving the Precision of Moisture Content Detection by Use of Electrical Resistance Method A Novel Piezoelectric Micro-Dissection Tool with Ultrasonic Vibration Influence of Dicumyl Peroxide and Maleic Anhydride on the Tensile Properties of HDPE-Calcium Carbonate Composites Correlations between Coating Components and Mechanical Properties of Weld Deposited Metal Lubrication Properties of Aqueous Solutions with Polyethoxylated Ether (PEOE) Added Preparation and Characteristics of Novelty Chitosan Schiff Base and its Zinc Complexes Effects of Atomic Oxygen Irradiation on PDMS/POSS Hybrid Films in Low Earth Orbit Environment Electrodeposition of PANI/MnO2 Composite on SnO2/Ti Substrate for Supercapacitor Electrode Study on the Physical and Chemical Properties of Lueyang's Basalt Fiber Synthesis and Characterization of Polyaniline Film Preparation of Hexaphenylamine Cyclotriphosphazene and its Green Flame Retardance on Epoxy Molding Compound for Large-Scale Integrated Circuit Packaging Comparison and Thermodynamic Analysis of Crystallinity of Noncrosslinking and Crosslinking Fluorinated Acrylate Copolymers Films Synthesis and Electrochemical Properties of Macro-/Microporous Carbon Foams The Influence of BaF2 Flux Concentration on the Luminescence of Sr3SiO5:Eu2+ Study on Techniques of Elastic Clamping and Plastic Cutting Corrosion Inhibition of Mild Steel by Benzotriazoliumionic Liquid in Hydrochloric Acid Formation of Antithermal Shock Composite Membrane on Aluminum Alloy through Anodic Oxidation Analysis on Influence of Oil Film Thickness on Temperature Field of Heavy Hydrostatic Bearing in Variable Viscosity Condition Recycled Applications of a Single Crystal Superalloy The Stability of a-Si:H Thin Films in Different Environment Graft Copolymerization of Starch and Acrylamide Initiated by AIBN in Aqueous Two-Phase System Study on Friction Stir Spot Welding Procedure of AZ31 Magnesium Alloy A Novel Technique for Preparation of the Fluorescence Sensor Based on Covalent Immobilization of 1-Aminopyrene Preparation and Photoluminescence Properties of Nd 3+ -Doped Silicate Glasses Study of Properties of Ni-Base Nano-ZrO2 Composite Plating Coatings Sc2O3 and Gd2O3 Co-Doped Strontium Zirconate as a New Thermal Barrier Coating Material Fast Analysis of Nitrobenzene by Nitroreductase Modified Electrode Fractal Growth of Minerals: a Modified DLA Model Modeling of Grain Growth with Second Phase Particle Pinning by Cellular Automata Method Corrosion and Ni-P Coating Protection of Carbon Steel Used in Hypochlorite Disinfection Solution Fibrillation of Lyocell Fiber and its Application in Battery Separator Band Gaps of SH Wave in Piezoelectric Phononic Crystal Research on Calculation Method of Fuel Consumption Rate Base on Engine Universal Characteristics Fatigue Microcrack Initiation and Propagation of Aluminum Alloy under Different Stress Level and Stress Ratio Ferroelectric Properties and Raman Scattering Spectra of Bi1-xGdxFeO3 Ceramics The Structure, Deformation and Properties of Al-5%Fe-Based Alloy Morphological Changes of Irradiated PMMA via Supercritical Carbon Dioxide Treatments Flotation Desulfurization of High-Sulfur Bauxite with Ethyl Thio Carbamate as Collector The Effect of Diacids and Diols on the Lipase-Catalyzed Synthesis and Properties of Biodegradable Functional Polyester Preparation and Properties of TiB2 Coating against Erosion by Molten Al-12.07wt.%Si Alloy Study on Effect of External Conditons for Hydrogenation Pump on the Dehydrogenation of Molten Aluminum Transparent Hydrophobic Fluorocarbon Coatings Fabricated on Regenerated Cellulose Films by RF Magnetron Sputtering Study on Formula of the Sizing Agent for Glass Fiber Reinforcedpolypropylene Dynamically Regulate and Control Complicated Auto Panel Uniform Forming Counter-Ion Induced Morphological Control of Polypyrrole/Fe3O4 Nanocomposites in the Presence of Surfactant CTAB Fluorescence Properties of Tb3+: SiO2-M2O3(M=Al,Ga)-LiF-CaF2 Glasses Inhibition of the Growth of Au Nanoparticles for Xanthine Sensing: Spectral and Electrochemical Studies on the Interactions between Xanthine and Au(III) Ions Preliminary Study on Fresh Storage of Orange with Tourmaline Fabrication of Rheological Material by Rotating Gas Bubble Stirring The Corrosion Resistant Cement System for Oil and Gas Wells Effect of Cr/Zr on the Electrochemical Behavior of Copper in NaCl/NaOH/HCl Solution Study on Cross Section Geometry of Preform for the Forming Laws of a Symmetrical Rib-Web Component The Effect of Bainitic Transformation Microstructure under Applied Stress on Corrosion Resistance of HQ785 Steel Metal Flow Rule of Multi-Way Tube Hydro Forming for Air Handling Unit Mechanical Properties of Natural Rubber and Chloroprene Rubber Latex Blends Synthesis, Optoelectronic Properties of a Novel Photochromic Diarylethene Bearing Phenyl and Thienyl Group Synthesis a New Diarylethene Bearing N-Propyl as Holographic Optical Recording Medium Influence of Sintering Temperature on the Electrochemical Performance of Sm0.5-XGdxSr0.5Co 3- /Gd0.1Ce0.9O1.95 Composite Cathode Effect of High-Pressure on the Accelerating Ripening of Gouda Cheese Quantitative Evaluation of the Glass Forming Ability of (Cu-Zr) Based Glass Alloys with Thermodynamics Method Influence of Substrate Temperature on the Properties of Al-Doped Zinc Oxide Films Prepared by DC Reactive Magnetron Sputtering Fretting Wear Behavior of ZR-ALLOY in Na2SO4 Solution Evenly Supported TiO2 on Activated Carbon Fiber and its Photocatalytic Degradation Property Microwave-Assisted Hydrothermal Synthesis of Hexagonal Columnar-Shaped Calcium Carbonate Ultrasonic Assisted Electro Deposition and Characterization of Ni-P Alloy onto Sintered NdFeB Magnet A Novel Electrochemical Impedance Biosensor Based on Plasma-Polymerized Films for Detection of Biotin Photochromism of New Hybrid Diarylethenes Bearing a Thiophene and Isoxazole Moiety Microstructures of Co-Continuous SiC/Fe-2Cr13 Composite Fabricated by Vacuum-Pressure Casting and Infiltration Processes Preparation and Characterization of Aqueous Oil-Modified Polyurethane Study on the Lead-Free Easy-Cutting Mg-Sb Brass Synthesis, Properties and Application in Optical Memory of a Photochromic Diarylethene Bearing Chlorine Atoms Alumina Sol-Gel Film for Pretreatment to Paint on Aluminum Alloy Study on the Brush Plating Tecnology of Austenite Stainless Steel Parts An Efficient Visible Photocatalytic System Containing Eosin Y, Multiwalled Carbon Nanotubes and CuO for H2 Evolution from Water Degradation of Rhodamine B in Wastewater Using Nanometer TiO2 Film under UV Light Irradiation Research on Absorbing Properties of Nickel Plating Carbon Fiber-Resin Composites Influence of Annealing Temperature on Microstructure and Magnetic Properties of Ti/Ni/Ti Thin Films Synthesis and Characterization of Star-Shaped Porphyrin-Cored Poly(L-lactide) The Coating Fragile Phase Thickness Measure Methods of Galvannealed Steel Sheet Synthesis and Characterization of Novel Amphiphilic Helical Copolymer Synthesis of Misfit-Layered Copper-Manganese Oxides Synthesis and Characterization of Alkyd Resin Based on Soybean Oil Polyols Preparation, Characterization and Application in Electromagnetic Wave Absorption of Core-Shell C/Fe3O4 Nanocomposites Geometric Analysis in an MR Fan Clutch Polymorphological LaVO 4:Dy 3+ Phosphors: Hydrothermal Synthesis and Luminescent Properties Dyeing of Silk/PLA Mixture with Reactive Dyes Influence of PEG20000 on Ultrafine ZnO Flowers Applications of P-Type NiO in Dye-Sensitized Solar Cells Electrochemical Migration and Rapid Whisker Growth of Zn and Bi Dopings in Sn-3.0Ag-0.5Cu Solder in 3wt.% NaCl Solution The Relationship between the Initial Gas Ratios and the Condensed Phase Composition in the CVD of BxC with BCl3-CH4-H2 Precursors Impact of Functional Layer for Thermal Stress of Concrete Pavement Structure Performance of Thermal Insulation Reflective Composite Coatings Synthesis and Characterization of Compostite Functionalized Mesoporous Materials Based on Silica as Separation Medium and Application in Electroplanting Additive Analysis Fabrication of Two-Dimensional Array of Nanophase Cobalt Oxyhydroxide by Bio-Templating Intelligent Modeling for Rate-Dependent Hysteresis Nonlinearity in Magnetostrictive Actuator Experimental Study of the Corrosion Behaviors on the Rod and Tube Material in Oil Pumping Wells Mechanical Properties of a Microcapsule-Containing Epoxy for Self-Healing Applications Heat Resistance of Ferritic Stainless Steels with 15% Chromium for Automobile Exhaust System Effects of Pyrolysis Conditions on the Permeance of Phenol-Formaldehyde Resin Based Carbon Membrane for CO2 Separation Chemical Tempering Process and Characterization of Na-Ca-Si Glass Affects of Citric Acid Concentration and System pH on the Speed and the Stability of Nickel Electroless Plating Research on Two Novel Functional Citral-Based Azobenzene Derivatives with Different Substituted Groups Improvement in Ovality of Pipeline Steel X80 with Weld Power under Multi-Wire SAW Welding Process Thermo-Physical Properties of SiCAl Composites with High Volume Fraction of Reinforcement Prepared by Combining Powder Injection Molding and Pressure Infiltration Preparation and Characterization of Magnetic Strong-Base Anion Exchange Resin Preparation of Uniform Hypercrosslinked Microspheres with Large Specific Surface Area Optimization of Six Strand Tundish Based on Flow and Temperature Photocatalytic Activities of Ce3+-Doped TiO2 Thin Films Prepared by Sol-Gel Method Study on Synthesis of Superabsorbent Using Microwave Heating and Water Absorbency Influence of Calcinations Temperature on Crystallization and Synthesis Process of Li4Ti5O12 First-Principles Investigation Density of States for LiNi1-xCoxO2 with x=0, 1/3, 2/3 and 1 Removal of Lead from Aqueous Solution by Sewage Sludge Carbon Adsorbent The Effective Thermal Conductivity of Composite Materials with Spherical Dispersed Phase Direct Electrochemistry and Electrocatalysis of Cytochrome C on the Interface of Ionic Liquid Functionalized Nano-Gold Inclusion Complex of Dibenzoylmethane with -Cyclodextrin Development of Pass Schedule Calculation Procedure for Single-Stand Reversing Cold Rolling Mill Solid-Phase Extraction of Trace Antibiotics Using New Hypercrosslinked Polymer as Adsorbent Influences of Current Density on Tribological Characteristics of Ceramic Coatings on 6061 Al Alloy by Plasma Electrolytic Oxidation Study on Tribology Characteristic of the Cast Iron Friction Pair in the Self-Repairing Additive and Mechanism Analyzing Corrosion Inhibition of 304L Stainless Steel by Dicyclohexyl Thiourea in HCl Solution Synthesis and Characterization of a New Thermosetting Boric Acid Ester Structure Influenced Physicochemical Properties of Pyridine Perrhenate Ionic Liquids Optimizing of Pretreatment Process of Electroless Ni-P Plating on AZ91D Substrate Improving the Toughness of Poly (L-lactic acid) by Interpenetrating Network Structure Effect of Co-Doped La3+/Halogen on Visible Light Photocatalytic Activity of TiO2 Preparation Technology of Corn Resistant Starch by Autoclaving Method Manufacturing Technique and Property Evaluation of Sound Absorption Composite Planks 6 Functional Materials Biaxially Drawn Behavior of - and -Polypropylene Films under Simultaneous Stretching Casting of Al-25%Si Strip Using a Vertical Type Twin Roll Caster The Analysis and Improvement on Shrunken Cause of Dome Roof Oil Tank in Winter Photochemical Synthesis of SnO2 and its Photocatalytic Activity for Hydrogen Production Study on the Preparation and Properties of the PVA/SiO2 Hybrid Coating on BOPP Film via Sol-Gel Process Changes in Physical Properties of ANF-6 Slag during Electroslag Remelting Process Preparation and Optical Properties of Sm2(WO4)3 Powders Manufacturing Technique of Sound-Absorbent PET/TPU Composites Telecommunication Evaluation of Conductive Composite Plates Manufacturing Technique and Property Evaluation of Impact-Resistant Polypropylene/Glass Fiber Composites Progress in the Theory Studies of CIECAM02 High-Gravity Assisting Combustion Synthesis to Prepare High-Strength Al2O3/ZrO2 (Y2O3) Eutectics Processing Technique and Property Assessment of Stab-Resistant Composite Fabrics The Influence of Fabric Structures of the Woven Fabrics on Electromagnetic Shielding Effectiveness Micropatterning of Schiff Bases Polymer Langmuir-Blodgett (LB) Films First-Principles Study on the Phase Transformation of V4+-Doped TiO2 from Anatase to Rutile Orthogonal Test of Flexural Toughness for Hybrid Fiber Reinforced Concretes Experimental Study on Tool Wear in Cutting Titanium Alloy Ti6Al4V Visible Light Photocatalytic Degradation PVC/B-F Co-Doped TiO2 Composite Research on Microstructure Distribution of Aluminum Profiles with Different Wall Thickness Sections Study on Preparation and Corrosion Inhibition by the Distiller's Grains Extract The Coarsening of Dendrite Arm Spacing during Solidification of Al-Cu-Mn Alloy Surface Morphologies of Sealed Film on Anodized Al Alloy Visco-Elastic Study on Filled Polymer Composites Preparation and Performance of Co3O4/Polyaniline Nano-Composite for Supercapacitor Electrochemical Determination of Nitrite Based on Gd Doped Nano Titanium Dioxide-Modified Gold Electrode Characteristics and Mechanism for Host-Guest Recognition of Isopropanol Vapor Based on Calixarene Supramolecules Calixarene Molecules Immobilized on Gold Substrates of QCM Sensors Based on Self-Assembled Monolayer Technology Technical Research of Alloy Bar's Rolling with Cooling The Research on the Effect of Drilling Fluids Additives on Rate of Penetration(ROP) Room-Temperature Electrical Conductivity Property of TiN/O'-Sialon Multiphase Ceramics New Hypercrosslinked Polymer Adsorbents for Solid Phase Extraction of Polar Compounds Damage Analysis for Coal Lance in Blast Furnace New Facile Method for the Hetergeneous Synthesis of Cyanoethyl Cellulose- Solvent Method,and Comparing with Traditional Method Effect of Potential on SCC Initiation for Pipeline Steel in near-Neutral PH Solution Detection of XinyangMaojian Green Tea Quality and Age by Electronic Nose Nanoporous Carbon Derived from Rice Husk for Electrochemical Capacitor Application Development of a New Production Line for Producing Carbon Fibers Research on One Bath Dyeing Technology of Wool and Silk Synthesis and Hydrogen Adsorption Properties of Templated Nanoporous Carbons Preparation and Formation Mechanism of Finely Dispersed Spherical ZnO Powders Photoluminescence Properties of Eu2+,Mn 2+Co-Doped Ca10Si6O21Cl2 by Sol-Gel Method Synthesis of Ti3SiC2 via Modified-SHS System through Arc Melting Synthesis, Crystal Structure and Antimicrobial Activity of a Mixed-Ligand Copper (II) Complex [Cu(pht)2 (phen)H2O] An Experimental Study on the Properties of Fe-Based Amorphous Composite Coatings Prepared by Different Processes The Investigation of Back-Mixing Particles near Dust Outlet in Cyclone Separator with Tangential Inlet Preparation and Characterization of Bi4Si3O12 Powders by Templates-Hydrothermal Method Synthesis,Crystal Structure and Antibacterial Activity of Nickel Complex with 5-Bromo-2- Hydroxyphenyl Ethyl Ketone Benzoyl Hydrazone Research on Preservation of Synsepalum Dulcificum by Coatings Precipitate Formation and Effects on Electrical and Mechanical Properties of Fluorinated Silicon Oxide Synthesis of Plated-Like Template Bi4Ti3O12 Particles and Properties The Application of CM Anti-Corrosion Composite Material in Repair Technology of the Corroded Concrete Buildings A Theoretical Analysis of the Fracture Behavior of a Multi-Layered Thin Film Structure under Residual Tensile Stress Copper Phthalocyanine/Fe3O4 Nanocomposite for Photocatalytic Degradation of Methylene Blue under Visible Irradiation Effect of Technics Parameter on Synthesis of Paraffin-Polystyrene Microsphere Laser Repair Cladding of Ni-Base Alloy on TC2 Ti Alloy A Magnetoelectric Screw Dislocation Interacting with an Elliptical Inhomogeneity Containing a Confocal Rigid Line A Research on the Influence of Sr/Al Ratio on Microstructure of Mg-Al-Sr Alloy Properties of Self-Expanding Nitinol Stents Treated by Addition of 600 DegreesC Heat Setting Process The Impact of PH on HPAM Removal from Daqing Oilfield Produced Water Using Clay and Organoclay Wastewater Minimization of Batch Processes with Single Contaminant Reach of Antibacterial Properties of Compound Coatings by Micro-Arc Oxidation and Electroless Silver Plating Numerical Simulation of Square Cup Deep-Drawing Process under the Different Constraint Degrees Condition Study on Cavitation Erosion Properties of Stainless Steel Vane Wheel Enhanced by Electro-Spark Deposition (ESD) Technology Formulation Design and Experiments of Emulsion for Rolling Process of Magnesium Alloy Corrosion Behavior of AZ61 Magnesium Alloys in NaCl Solution Comparative Static Blu-Ray Recording Properties for Three Metal(II) Complexes in Spin-Coated Films The Influence of Heating-Cooling Cycles on the Thermal Storage Performances of Al-17 Wt.% Si Alloy Mathematic Model of Recrystallization of Cu-20Ni-5Sn Alloy Characteristics of Rich Phytic Passivator without Cr for Brass Strip Effect of Three Kinds of Biocide on the Anti-Corrosion Performance of TP304 Stainless Steel in Cooling Water Yttrium Oxide Luminescence Films Preparated by Electrodeposition- Sinter Method Fabrication of Superhydrophobic Surfaces on Aluminum Alloy by Simple Chemical Etching Method The Influence of Sinterng Temperature on the Phase, Microstructure and Textual Properties of Hollow Hydroxyapatite Microspheres Influences of Rapid Quenching on the Structures and Electrochemical Performances of La0.7Mg 0.3Co0.45Ni 2.55-xFex (x = 0-0.4) Electrode Alloys Kinetics of Microwave-Assisted Reduction of Manganese Oxide Density Functional Theory Investigating Interlayer Structure and Ion-Exchange Properties of Mg/Al Layered Double Hydroxides Analysis of Torque in Magnetorheological Rotary Brake Synthesis of Macroporous Polystyrene Validamycin a Amphiphilic Adsorbent Resin and its Adsorption Properties for Pueraia Isoflavones High Temperature Oxidation Properties of Cr/C Coating on 4Cr10Si2Mo Steel by Plasma Immersion Ion Implantation and Deposition Adsorption of Cu(II) Ions from an Aqueous Solution by Cross-Linked Carboxymethyl Konjac Glucomannan The Alkaline Activation of Calcium Oxide on Phosphorous Slag Powder Cementing Material in Autoclaved Curing Ultrasonic-hydrothermal Synthesis and Characterization of Mesoporous Anatase TiO2 Microspheres A Facile Approach to -FeOOH Nanorods with High Aspect Ratios Residual Stress Analysis in Different Thickness TiN Coatings on High-Speed-Steel Substrates Influencing Factors of Phytic Acid Conversion Coating on AZ91 Magnesium Alloy Prepare and Performance Research on PVA/TiO2 Composite Films Study on Direct Reactive Compatibilization of HDPE/Wood-Flour Composites Radiative Transition Properties of Tm3+ in Aluminum Germanate Glass for FWW Waveguide Amplifier Characteristics of Silver Films Deposited on the Surface of PET Fabric Influence of Electrode Argon-Hydrogen Co-Injection on Carbon Content in a Alternating Current Ladle Furnace Blank Shape Optimization of Square Cup Deep-Drawing under the Unilateral Constrained Condition The Numerical Simulation on Welding Stress Field of High Strength Steel for Axle Case Steel 390Q Non-Linear Methods Could More Accurately Measure Chlorophyll Content in Grape Foliar Non-Destructively with Visible/Red-Infrared Hyperspectral Preparation and its Application Performance of Backfilling Cementation Material Based on Blast Furnace Slag Flow Behavior and Microstructural Evolution of a 7039 Aluminum Alloy during Hot Deformation Research and Progress on CA Mortar Emulsifying Asphalt of Ballast-Less Slab Track Visible-Light Photocatalytic Property of Titanate Nanotubes Sensitized by Several Porphyrins Study on Technology of Manufacturing Veneer-Rice Straw Composite Board The Effect of Impregnation Process on the Performance of Veneer Composite Plank Synthesis and Properties of a Novel Diarylethene Having Two Fluorines Synthesis and Optoelectronic Properties of a New Photochromic Diarylethene Bearing a Cyano Group Characterization and Evaluation of Binding Properties of Salvianolic Acid a Imprinted Polymers Prepared by Precipitation Polymerization Synthesis and Property of a New Diarylethene Bearing both an Isoxazole Moiety and a Chlorine Atom Synthesis of a Core-Shell Acrylate Elastomer with UV Stabilization and its Application in Polyoxymethylene Deformation Behavior of Spirogyrate Ring for Cold Ring Rolling Crack Resistance and Structural Analysis on Thermit Welding Synthesis, Photochromism and Holographic Optical Recording of a Photochromic Diarylethene with a Chlorine Atom Synthesis, Characterization and Photoluminescence of 1,1'-Thiene-2,5-Diyldibutane-1,3-Diketone Effect of Fe-Coating on Electromagnetic Performance of Hollow Carbon Fibers An Investigation on Anti-reducing Effect of CaO in Barium Titanate Based Ceramic Effects of Conditioners on Dewatering Properties of Sludge and its Microstructure Characteristics Nitrite Sensors Based on Gold Particles and Polyaniline Modified Electrodes Surface Modification of TiO2 Nanopaticles with Good Reflective Properties for Electric Ink Development of Low-Cost LX70A Rod for Steel Cord An Improved Strontium-Based Aerosol Fire Extinguishing Agent with Potassium Additives The Effect of DCF on Codeposition of Al and Si by Pack Cementation Synthesis and Characterization of EuL3(phen) Luminescent Complex CsH2PO4: Electrolyte for Intermediate Temperature Fuel Cells The Electrochemical Biosensor Based on the Immobilization of Horseradish Peroxidase on TiO2 Nanoneedles Modified Electrodes Devulcanization of Waste Tire Rubber Vulcanizate through a Mechanochemical Pan Milling at Ambient Temperature Effects of Polymer-Filler Properties on the Warpage of Injection Molded Automobile Door Research on Microwave Sintering Process for High Strength HA Porous Scaffold Synthesis and Characterization of Magnetic NiFe2O4 Nanosheets Unitary Micro-Patterning Structure-Induced Hydrophobic Silicon Surface Effect of Electrode Tip Shape on Strength and Microstructure in Resistance Spot Welding of AZ31B Magnesium Alloy Impact of Different Additives on Performances of Unfired Magnesia-Calcia Brick for AOD Furnace Study on Corrosion Behavior of Alloy 600 in NaCl Solution Optimum Design of Plastic Injection Mould Gate Based on MoldFlow Chiral Separation of Amino Acid Derivatives by Molecular Imprinting Technique Pole Figure Analysis for Fe-3% Si Silicon Steel Synthesis and Property Study of Modified Poly(N-isopropylacrylamide) Containing Eu(III) Preparation and Properties of Amino Acid Chelating Resin from the Waste Plastic of Polystyrene Preparation, Characterization and Photocatalytic Properties of Cu, P-codoped TiO2 Nanoparticles Synthesis, Crystal Structure, Characterization of a Pb(II) Mixed-Ligand Tetrazolate Complex Preparation and Electrochemical Characteristics of Nitrogen-Doped Mesoporous Carbon Using Surfactants as Carbon Source Preparation of Super Absorbent Polymer by Carboxymethyl Cellulose Grafting Acrylic Acid Using Low-Temperature Plasma Treatment Analysis of Cylindroid Shell Subject to Internal Linearly-Increased Pressure Prediction of Tensile Modulus of 3D Four-Directional Braided Composites with Transverse Cracks UV-Vis/Ferrioxalate/H2O2 System on Degradation of Anthraquinone Dye Wastewater Transparent Aquabeads To Visualize Flow In Porous Material Preparation and Properties of Epoxy Matrix for Composite Cable Core Synthesis, Characterization and Photophysical Properties of Rhenium(I) Complexes Containing 4,5-Diazafluorene Ligan Synthesis of Aromatic Polyesters with Pendent Carboxyl Groups from Diphenolic Acid, Bisphenol a and Isophthaloyl Chloride by Interfacial Polycondensation A Dendronized Cellulose Derivative and its Thermotropic Liquid Crystal and Lyotropic Cholesteric Liquid Crystal Behaviors Preparation of NaA/PTFE Composite Membrane for Separation of DMF/H2O Mixture by Pervaporation Low Temperature Method for Enhancing Ferroelectric Thin Films in Non-Volatile Random Access Memory Devices Effect of Irradiation on the Molecular Weight, Structure and Apparent Viscosity of Xanthan Gum in Aqueous Solution Fundamental Studies on Wood-Plastic Composites: Effects of Cellulase Treatment on Hybrid Pennisetum Powder Synthesis and Property of a New Symmetry Diarylethene Bearing Benzene Preparation of a New Water-Based Strippable Protected Coating Use CO2 Soluble Surfactant to Decrease the Minimum Miscibility Pressure of CO2 Flooding in Oil Reservoir Acylchloride-Functionalized Multiple-Walled Carbon Nanotubes Reinforced Polyimide for High Dielectric Properties Study on the Preparation Processing of New Functional Materials Dielectric Elastomer - E-ACE Study on Ce and La Doped 0.85NBT-0.144KBT-0.006BT Lead-Free Piezoelectric Ceramics Effect of Drying Methods on Structure and Mechanical Properties of Bacterial Cellulose Films Preparation of Sn4+ -Doped TiO2 and Investigation of its Photocatalytic Activity Micron Sized Polyurethane Shape-Memory Polymer Beads Effect of Interconnectivity of Nickel on Electrical and Thermal Properties of Alumina-Ni Interpenetrating Phase Composite Rational Construction of Polymeric Mercuric(II) Imidazole with High Anion Exchange Capacity Silane Treatment Technology on Aluminum Surface Analysis of Numerical Simulation in the Deep Drawing of Box-Shaped Parts Using Variable Blank Holder Force A Study of N Heterocyclic Compound as a Potential Lubricating Oil Additive Research on Temperature Field Distribution of Heavy Hydrostatic Thrust Bearing Rotation-Workbench at Different Rotating Velocity Preparation of Photostable Chlorophyll/PVA Film Synthesis and Micellar Properties of Star-Shaped Poly( -Caprolactone)-Dextran Amphiphilic Block Copolymer Chitosan Functional Finishing of Bamboo Pulp Fiber Fabric in Aqueous Citric Acid Media Preparation and Mechanical Properties of Carbon Nanotubes Reinforced Alumina Ceramic Composite Comparison of Conductivity CsH2PO4 Nanocrystal Using Two Surfactants CTAB and F-68 Characterization of Cr-Ni-ZrO2 Composite Coatings Electrodeposited from Cr(III) Plating Bath Preparation TiO2 Thin Films Using Freeze Drying Technique Novel Thermally Stable Epoxy-polyurethane Composites: Preparation, Characterization Microwave Preparation of Ionic Liquid Functionalized SBA-15 and its Application in Fabrication of Electrochemical Sensors Transparent Conductive Cu-In-O Thin Films Deposited by Reactive DC Magnetron Sputtering with Different Targets Preparation of Cu-Cr-Zr/AlN Nanocomposites and their Mechanical and Conductive Properties Development and Applications on Integrated Multilayer Wrapped Urea Reactor The Syntheses and Mark-Houwink Empirical Formula of Polysiloxanes Containing Cyanoethyl Groups as Side Substituents Research and Development on Phase Change Energy Storage Exchangers Deformation Mechanism of Diamond Nanocutting Single-Crystal Copper Using Molecular Dynamics Simulatio Preparation and Properties of Sulfonated Polyimide Proton Conductive Membrane for Vanadium Redox Flow Battery Mechanical Behavior of SiC Fiber Reinforced Al Matrix Composites: A Study Based on Finite Element Method Synthesis and Characterization of 3Y-TZP Powders by Stirring Ball Milling Research on Morphology of N80 Casing Drilling Steel Fatigue Crack Growth with Low-Frequency Noise Influence of the Pore Structure on the Reaction Characteristics of the Gas Sensitive Porous Medium Only Formation of ZrAl3 Phase Obtained by Self-Propagating Reaction from Zr-Al Elemental Powders Experimental Study on the Crystallinity and Mechanical Properties of the Injection Molded Polypropylene Nitroso-R-Salt in Aqueous Solutions for Redox Flow Battery Application Study on the Chemical Modification of Titanium-Doped Silicone Using Hydroxyl-Terminated Saturated Polyester Research on Salt Fog Corrosion Behavior of Welded Joint of 7N01-T4 Aluminum Alloy for High-Speed Train Effect of KCl on Crystal Morphology of Electrodepisited Cu2O Thin Films Tetra-(N-Phenylpyrazole)-Porphyrin/ -Cyclodextrin Incorporated CNT Film Modified Hemoglobin Sensor Annealing Effects on Structural and Magnetic Properties of Al doped ZnO Thin Films Synthesis of Fe 3+-Dopped PANI Conductive Nanomaterials via Interfacial Polymerization Synthesis and Characterization of Modified Chitosan by Graft Polymerization Application of Control Parameters Optimization of CNC Servo System Based on Self-Adaptive Genetic Algorithm Hydrothermal Synthesis and Characterization of Nanocrystalline Gd2Sn2O7:Eu3+ Phosphors Chitosan Cellulose Acetate Microspheres Preparation for Enhancement of Water-soluble Dye Adsorption The Activate Processe of Ni-P Electroless Plating on the Surface of SiC Particles SNOM Probe Based on Nano-Antenna with Large Aperture and High Resolution Research on the Key Technologies of Intelligent Control for Cap-Shape Bending of Sheet Metal A Novel Approach to Prepare Fluorinated Polyether Glycol Using Phase-Transfer Catalysts Synthesis Structure and Catalytic Activity of TiO2/ La2Zr2O7 Nanocomposites Preparation and Fluorescence Properties of Dendritic 8-Hydroxyquinoline and their Zinc Complexes Effect of Complex Agents on the Performance of Electrodeposited Ni-Graphite Composites Novel Concept of Cleansing the Liquid Steel by the Fine In-Situ Phase due to the Composite Ball Explosion Reaction in RH Ladle Synthesis and Thermal Properties of a Boron-Containing Bisphenol-S Formaldehyde Resin Preliminary Study of Oxygen Evolution Ti-Al Composite Anode Synthesis and Photocatalylic Activity of SrCu2O2 for Water Decomposition to Hydrogen Viscoelastic Analysis of the Low-Temperature Anti-Cracking Performance of SBR Modified Asphalt Mixtures A Novel Synthesis Route for Highly Ordered MCM-41 Assembled from Y Zeolite Seed Colloidal and its Performance as the Support for the Catalyst Preparation of C/C-SiC Composite with Hydrogen-Containing Polysiloxane as Ceramic Precursor The Preparation of Ni-Co-Fe/PU Magnetic Composite Membrane Facile Fabrication of Flower-Like LLM-105 Three-Dimensional Microstructures Theoretical Model Study of Micro-Electric Field Effects on Seepage in Micro Particle Clays Reinforcement of Natural Rubber with Quartz/Sericite/Wollastonite Effect of Sizing Agent on the Surface of Carbon Fiber and Interfacial Adhesion of Carbon Fiber/Vinyl Ester Resin Composite Structural, Optical and Photocatalytic Photodegradation Properties of Zn1 xMnxO Prepared by the Sol-Gel Process Synthesis and Characterization of Ni(OH)2/Multiwalled Carbon Nanotubes Nanocomposites for Electrochemical Capacitors Research Status and Prospects of Surface Nanocrystalline Technology of the Metal Materials Interfacial Microstructure Evolution of Copper/Aluminium Laminates with Different Annealing Processes Synthesis,Film Morphology and Performance on Fabrics of a Novel Amino Functional Polysiloxane Study on Abrasive Wear Behavior and Mechanisms of 7Cr7Mo2V2Si Steel as Drilling Tool Materials Fe-doped TiO2/SiO2 Aerogel Microspheres for Visible Light Photocatalysis Degradation of Methylene Blue Synthesis, Structure and Photoluminescent Properties of Zn(II) -Complex with 2,4,6-tris-(benzimidazolyl-2-yl)pyridine Ligand Preparation and Modification of Y2Cu2O5/Y2O3 Photocatalysts for H2 Evolution under Simulated Sunlight Irradiation Synthesis of Al2O3 Reinforced TiAl Composites from Ti-Al-Nb2O5 Preparation and Properties of Silicone Modified Epoxy Resin, Nano-TiO2 and Nano-TiO2/Micron-Al2O3 Polymer Alloys Putty A Novel Method for Fabrication of the Biomimetic Shark-Skin Coating Study on the Magnetorheological Effect of MR Elastomer under Shear-compression Mode The Analysis of the Deformational Behavior and Mechanical Properties of Composite Yarn under the Conditions of Small Deformation Detection of Carbon Dioxide in Transformer Oil with Coated Piezoelectric Quartz Crystal Sensor Proton Exchange Membrane Based on Sulfonated Polyimide for Fuel Cells: State-of-the-Art and Recent Developments Improved Synthesis Methods for Barium Hexaferrite Preparation of HBWSL-1 Type Photosensitive Resin for Stereolithography and Study on the Accuracy of its Fabricated Parts White Organic Light Emitting Devices Based on the New Hole Injection Material MeO-TAD Magnetic Properties of Mn/Co/Sn Substituted Barium Hexaferrites Synthesized by an Improved Co-Precipitation Method Electrodeposition and Characterization of Cr-Fe-ZrO2 Composite Coating from Trivalent Chromium Chloride Electrolyte Effect of Rare Earth Elements on Corrosion Behavior of Q345B Steel in CSP A Study on Effect Evaluating and Parameters Sensitivity Analyzing of Superheated Steam Soak in Heavy Oil Reservoirs Integration of Preparation and Stabilization for Hemihydrate Calcium Sulfate Whiskers Tm3+-doped Bismuth Tellurite Glasses for S- and U-band Optical Amplifiers Research of Manufacturing Battery-Grade Co3O4 of Octahedron-Shape Preparation of Homogeneous Carbon Nano Particles Using Zeolite Zn-Doped Palygorskite Loaded TiO2 for Visible-Light Active Catalysts Numerical Simulation of Magnetic Fluid Used in Sintering and Cooling Equipments Seals as a Functional Material Warm Flow Compaction to Form Cross-Shaped Parts with Threaded Holes Carbon Microspheres Prepared by High Internal Phase Emulsion Polymerization Magnetic properties of (Sr1.85Ln0.15)FeMoO6 with Ln = Sr, La, Ce, Pr, Nd, Sm and Eu Dielectric Composites Containing Core@shell Structure Particles Antibacterial Property of Active Packaging of Microencapsulated Cinnamon Oil Combined with ZnO-Coated PVC Film Simulation Research on Cutting Process of Single Abrasive Grain The Effect of Vacuum Heat Treatment on the Oxidation Behavior of APS Thermal Barrier Coating Effect of H2S Partial Pressure on CO2/H2S Corrosion of Oil Tube Steels The Study of the Interface Evolution and the Performance of the Ti-Al Composite Electrode Materials Effect of Amino Acids on the Corrosion of Steel in Sulfuric Acid Solutions Study on Reactive Blend Systems of PA1010/ABS/PP A Dynamically Nanoporous Metal-Organic Framework Functional Properties The Selection and Application of Filling Material Based on Long-Term Strength of Backfill Body Preparation and Photoluminescent Properties of Doped Ternary Europium Complexes Bearing 1-(Naphthalen-2-yl)-3-phenylpropane-1, 3-dione Magnetization Evolution with Hole Doping Level in (Sr2-xNax)FeMoO6 7 Other Related Fields An Assessment of Mechanism for Oxidation Corrosion of Alloy T91 Tubes in Supercritical Boilers Production and Application of High Capacity Bottom Blowing Purging Plugs for Converter Structure and Properties Analysis of Microcapsulated Capsaicin Prepared by Diphase Emulsion Method The No-Cyanide Copper Electroplating with Dipping-Plating Pretreatment Preparation and Electrochemical Properties of Fluorinated Mesoporous Carbon Foams for Electric Double-Layer Capacitors Catalysis Investigation of PET Depolymerization by ZnSrO2 under Microwave Irradiation Non-Isothermal Crystallization Behavior of Poly(Ethylene Terephthalate)/Carbon Black Composite Research on Microstructure and Room Temperature Plasticity of Mg94.5Zn4Y1Er0.5 Alloy Sheet Study on the Preparation and Properties of Collagen Fiber- Polyurethane Composite Film MISPE Combined with GCMS for Analysis of Organophosphorus Pesticides from Environmental Water Sample Preparation and Properties of Emulsion Coating of Polyacrylate Modified by In-Situ Nano-Hybrid Silica Fabrication of (GOx/Pt-DENs)n/CNTs Nanocomposite and their Electrochemical Properties for Anode in Biofuel Cell Research on Mechanical Properties of Modified Organic Montmorillonite Reinforced Nature Rubber(NR) Composites Potential Analysis in Nanoturning of Single Crystal Silicon Using Molecular Dynamics Physical and Electrical Properties of Lead-Free (Bi0.5Na0.5)TiO3-(Bi0.5K0.5)TiO3 Ceramics The Compression Behavior Simulation of Aluminum Foams Novel Method to Toughen Polypropylene by Uniaxial Compression Processing Curing, Thermal and Mechanical Properties of Liquid Crystalline p-SBPEPB/BPAER/DDE System Fabrication of Mesoporous ZrO2 by Using Rosin-Based Quaternary Ammonium Salt Effect of Deformation Degree on Mechanical Properties of AZ80 Magnesium Alloy Influence of Shape of Coarse Aggregate on Performance of Open Graded Friction Course Research on Grafted Chitosan in Heterogeneous System Research on Preparation and Semi-IPN Structure of Absorptive Copolymethacrylate Fiber Research of Color and Discoloration Resistance of 18K Rosy Gold for Ornaments A Novel Photochromic Diarylethene Based on Thiophene and Isoxazole Moieties for Optical Recording The Preliminary Study of the Manufacturing Process of Veneer Composite Plank Influence of Copper as a Co-Catalyst of Potassium Hexaniobate Nanotubes on the Photocatalytic Hydrogen Evolution from a Methanol Aqueous Solution Facile Preparation of AgIn5S8 Pompon-like Microspheres with High Visible Light Photocatalytic Activity Synthesis of Nd:YAG Powders by the Co-Precipitation Method Novel Self-Healing Techniques for Cement Matrix Microcrack Novel Iron(II) Complex as Single-Site Catalysts for Ethylene Polymerization Titanium Dioxide Supported on Activated Carbon Performance of Wastewater Decomposition and Statistical Analysis of Bulk Density Levels of Dense Phase Flyash Powder Flow within a Pneumatic Conveyor Eco-Friendly Dye-free Coloration Technology for Wool Based on Fenton Reagent Pretreatment Electrochemical Capacitive Performances of Ordered Carbon Nanotube Arrays Synthesis of Poly(acrylamide-Methacrylate)-G-Octylphenyl Polyoxyethylene and its Micellar Behavior in Aqueous Solution Manufacturing Technique of Stab-Resistant Laminated Composite Nonwoven Fabrics Enzymatic Hydrolysis Lignin Epoxy Resin Modified Asphalt Effect of Thixotropic Agent on the Properties of Conductive Silicone Rubber Gasket for EMI Shielding Forming In-Situ Micro-Cavities on 316L Stainless Steel Surface by Aluminum Electrodeposition and Anodization Technology Odd-Carbon Alkyl-Substituent Effect on Liquid Crystalline Properties of Discotic Hexa-Peri-Hexabenzocoronene Molecule Effect of Heat Treatment on Microstructure and Corrosion Resistance of Ni-P/BN(h) Composite Coatings Chemical Composition and Antimicrobial Activity of Volatile Components from Wild Illicium Wardii in China Corrosion Characteristics and Corrosion Current Distribution of Steel Bar in Carbonated Concrete Online Roller Punching Equipment Application in Cold Roll Forming

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB06516302
• ISBN:
  • 9783037851234
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 4 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058