Euro superalloys 2010 : selected, peer reviewed papers from the European Symposium on Superalloys and their Applications, 25-28 May, 2010, Wildbach Kreuth (Germany)

著者

• European Symposium on Superalloys and their Applications
• Heilmaier, M.

書誌事項

Euro superalloys 2010 : selected, peer reviewed papers from the European Symposium on Superalloys and their Applications, 25-28 May, 2010, Wildbach Kreuth (Germany)

edited by M. Heilmaier

（Advanced materials research, v. 278）

Trans Tech Publications, c2011

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). It is noticeable that superalloys have regained their momentum. The worldwide effort to increase the efficiency and extend the lifetime of energy conversion facilities depends upon improved materials and manufacturing techniques. Materials are now expected to exhibit outstanding mechanical strength and creep resistance at high temperatures, as well as a good corrosion and oxidation resistance. Superalloys have this potential, but many of the commercial grades are still based upon metallurgical concepts that date back to the 1980s, and have typically been exploited so far in only a few prominent areas of application. Improvement in their high-temperature capability, and the adaption of manufacturing processes to new fields of application, present major challenges to current researchers in industry and academia. These papers, published within the context of the first European Symposium on Superalloys, present the current state of progress in the development, production and properties of cast, wrought and powder-metallurgical superalloys and associated coating systems. They represent a timely and invaluable guide to the subject.

目次

Preface and Organizing Committee Plenary Mechanical Properties of the Ternary L12 Compound Co3(Al,W) in Single and Polycrystalline Forms Microstructure and Characterization Dislocation Mechanisms during High Temperature Creep Experiments on MC2 Alloy Decorrelated Dislocation Movement in the -Matrix Channels of a Ni-Based Superalloy: Experiment and Dislocation Dynamics Simulation Evolution of Raft Structure during Creep Deformation of the Ni-Based Single-Crystal Superalloy TMS-138 Dislocation Structures in the Gamma Prime-Phase of CMSX-4 and TMS75 after Degradation under Service Conditions Dissolution of Fine ' Precipitates of MC2 Ni-Based Single-Crystal Superalloy in Creep-Fatigue Regime Diffraction Profile, Strain Distribution and Dislocation Densities during Stage II Creep of a Superalloy In Situ Investigation with Neutrons on the Evolution of ' Precipitates at High Temperatures in a Single Crystal Ni-Base Superalloy In Situ Measurement of Internal Stresses and Strain Rates by High Energy X-Ray Diffraction during High Temperature Mechanical Testing A Study of the Effects of Alloying Additions on TCP Phase Formation in 4th Generation Nickel-Base Single-Crystal Superalloys Lattice Misfit of High Refractory Ruthenium Containing Nickel-Base Superalloys Characterization of Single-Crystal Dendrite Structure and Porosity in Nickel-Based Superalloys Using X-Ray Micro-Computed Tomography Effect of HIP Parameters on the Micro-Structural Evolution of a Single Crystal Ni-Based Superalloy Secondary Reaction Zone Formations in Pt-Aluminised Fourth Generation Ni-Base Single Crystal Superalloys A Review of the Measurement of Single Crystal Orientation Parameters of Nickel Castings Some Deformation Micromechanisms in Ni-Based Superalloys Evidenced Using TEM In Situ Experiments Effect of the Particle Size of ' Phase on the Mechanical Properties of Ni Base Superalloy Characterization of Residual Stresses in 718 Turbine Discs by Neutron Diffraction and Finite Element Modelling Cooling Rate Dependent Morphology of the ' Precipitates in Nickel-Base Superalloy Udimet 500 Influence of Crystal Orientation on the Freckle Formation in Directionally Solidified Superalloys The Microstructure Changes in IN713LC during the Creep Exposure Effect of Elastic Driving Force on the Evolution of Microstructures in the Secondary Creep Stage Change in Microstructure at Grain Boundaries with Creep Deformation of Polycrystalline Nickel-Based Superalloy IN-100 at 1273K Change in Gamma Prime Morphology and Dislocation Substructures of Single Crystal Nickel-Based Superalloy, CMSX-4, Pre-Crept at 1273K-400MPa with Simple Aging Modelling and Simulation The Effect of Lattice Misfit on Deformation Mechanisms at High Temperature Prediction of Mechanical Behaviour in Ni-Base Superalloys Using the Phase Field Model of Dislocations Effect of Thermophysical Properties and Processing Conditions on Primary Dendrite Arm Spacing of Nickel-Base Superalloys - Numerical Approach Liftime Optimization of Hot Forged Aerospace Components by Linking Microstructural Evolution and Fatigue Behaviour Comparison between Microstructure Evolution in IN718 and ATI Allvac (R) 718PlusTM - Simulation and Trial Forgings On the Oxidation Resistance of Nickel-Based Superalloys Modeling of Precipitation Kinetics of TCP-Phases in Single Crystal Nickel-Base Superalloys Microstructure Prediction during Incremental Processes for Hot Forming of 718 Alloy Analysis of the Alloying System in Ni-Base Superalloys Based on Ab Initio Study of Impurity Segregation to Ni Grain Boundary Application of Thermodynamic and Kinetic Modeling to Diffusion Simulations in Nickel-Base Superalloy Systems Numerical Modelling of Stress and Strain Evolution during Solidification of a Single Crystal Superalloy Modelling Texturised Cast Structures in the Forging of Superalloys Viscoplastic Phase Field Simulation of Microstructural Evolutions under Complex Loadings in Ni-Base Superalloys The Effect of Multiaxial Stress State on Formation of Rafts in CMSX-4 Superalloy during Creep Modelling of Phase Evolution during Aluminizing Processes Continuum Damage Mechanics Modeling of Creep in DS GTD-111TM Superalloy Behaviour of Ni-Based Alloys for Fossil-Fired Power Plant Components in the Long-Term Creep Regime Simulation of the External Pressure Influence on the Micro-Structural Evolution of a Single Crystal Ni-Based Superalloy Application of a Multiscale Constitutive Framework to Real Gas Turbine Components Processing Effect of Microstructure on High-Temperature Mechanical Behavior of Nickel-Base Superalloys for Turbine Disc Applications Microstructure and Mechanical Properties of an Advanced Nickel-Based Superalloy in the as-HIP Form Microstructural and Mechanical Effects of Thermo-Mechanical Processing on ATI 718Plus (R) Contoured Rings Production of Net-Shape Static Parts by Direct HIPing of Nickel Base Superalloy Prealloyed Powders Microstructure and Properties of Nanostructured Alloy 718 Mechanical Properties of Powder Injection Molded Ni-Based Superalloys Hot Isostatic Pressing Improves the Quality of the Blades from Nickel Base Superalloys for Turbine Engines Superplastic Roll Forming of Axial Symmetric Articles from Superalloys Development and Application of Heat-Conductor Technique for Single Crystal Components of Superalloys Study of the Turning Nickel Base Alloy Pyromet (R) 31V (SAE HEV8) Mechanical Behaviour The Relaxation Behavior of High Chromium- Ni Base Superalloys Thermal Stability of a Ni-Cr-W-Mo Alloy - Long-Term Exposures Influence of Grain Boundaries on Short Fatigue Crack Growth in "Polycrystalline CMSX-4" Creep Rupture Strength of Re and Ru Containing Experimental Nickel-Base Superalloys Influence of Chemistry on the Tensile Yield Strength of Nickel-Based Single Crystal Superalloys Influence of Gamma Prime Evolution on the Creep Behaviour of SX Nickel Base Superalloys On Localized Deformation and Recrystallization as Damage Mechanisms during Thermomechanical Fatigue of Single Crystal Nickel-Based Superalloys A Mathematical Framework for Cyclic Life Prediction of Directionally Solidified Nickel Superalloys Time and Temperature Dependent Cyclic Plasticity and Fatigue Crack Growth of the Nickel-Base Alloy617B - Experiments and Models Degradation in Fatigue Crack Propagation Resistance of a Gas Turbine Vane after Long Term Service Evaluation of Mechanical Properties of a Superalloy Disk with a Dual Microstructure Evaluation of Property Scatter of Nickel Base Alloy IN 738 LC Analysis of the Effective and Internal Cyclic Stress Components in the Inconel Superalloy Fatigued at Elevated Temperature Alloy Development A1-L12 Structures in the Al-Co-Ni-Ti Quaternary Phase System Development of New C&W Superalloys for High Temperature Disk Applications Hot Deformation Behaviors and Microstructure Evolution in a New PM Nickel-Base Superalloy Solidification Undercoolability of Superalloys and Solidification Defects in Single Crystal Components Solidification Characteristics and as-Cast Microstructure of Rhenium-Containing Single Crystal Superalloys under High Thermal Gradient Directional Solidification Investigation of Freckle Formation under Various Solidification Conditions Manufacturing, Joining and Repair A Study of the Weldability of Gamma Prime Hardened Superalloys Characterization of the Weld Line Zones of an Inertia Friction Welded Superalloy Crack-Free Welding of IN 738 by Linear Friction Welding Transient Liquid Phase Bonding of Pairings of Parent Superalloy Material with Different Composition and Grain Structure Chip Formation and Machinability of Nickel-Base Superalloys Properties of Welded Joints on Superheater Coils Made from New Generation High Alloy Martensitic Steels Connected to Austenitic Creep-Resisting Steels and Supper Alloy Grades, for Supercritical Parameters Effect of Nitrogen on Microstructure and Properties of a Cast Cobalt-Base Superalloy Mechanical Properties of New Ni-Mn-Based Braze Alloys for the Fast Epitaxial Braze Repair of Single-Crystalline Ni-Base Superalloys High Temperature Coatings Formation of a Protective Alumina Scale on Ni-Base Superalloys by Using the Halogen Effect Development of Chromium and Aluminum Coatings on Superalloys by Pack-Cementation Technique Intermetallic Ti-Al-Cr Based Layers and Zirconia Topcoats Deposited on Gamma Titanium Aluminides for Environmental Protection Structure of NiCrAlY Coatings Deposited on Oriented Single Crystal Superalloy Substrates by Laser Cladding Laser Shock Adhesion Test (LASAT) of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings (EB-PVD TBCs) Increased Wear and Oxidation Resistance of Titanium Aluminide Alloys by Laser Cladding Evolution of the Diffusion Layer in a CMSX4 Single Crystal Superalloy Materials beyond Superalloys Microstructural Evolution of Mo-Si-B Ternary Alloys through Heat Treatment at 1800 DegreesC Microstructural Properties of Nb-Si Based Alloys Manufactured by Powder Metallurgy Design Considerations and Strengthening Mechanisms in Developing Co-Re-Based Alloys for Applications at + 100 DegreesC above Ni-Superalloys High-Temperature Oxidation Behaviour of Co-Re-Cr-Based Alloys: Limitations and Ways to Improve Light-Weight Intermetallic Titanium Aluminides - Status of Research and Development Some New Aspects in Developing TiAl Based Alloys as Competitive High Temperature Materials Qualification of a Casting Technology for Production of Titanium Aluminide Components for Aero-Engine Applications Chromium-Based Alloys Strengthened by Ordered Phase Precipitation for Gas Turbine Applications Tin Addition to Improve the Oxidation Behaviour of NbSs/Nb5Si3 Based In Situ Composite Performance of Materials in Service Environments Use of Alloy 59 for the Transport of Highly Corrosive Dangerous Goods High-Temperature Oxidation Performance of Mo-Si-B Alloys: Current Results, Developments and Opportunities

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB06863237
• ISBN:
  • 9783037851135
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xiv, 600 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058