Materials and design : selected, peer reviewed papers from the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), July 29-31, 2011, Sanya, China

著者

• International Conference on Advanced Engineering Materials and Technology
• Sang, Xiaoming

書誌事項

Materials and design : selected, peer reviewed papers from the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), July 29-31, 2011, Sanya, China

edited by Xiaoming Sang ... [et al.]

（Advanced materials research, v. 284-286）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

The papers in this volume were subjected to peer and expert reviews, and cover the subjects of composites, micro-/nano-materials, iron and steel, ceramics, metallic alloy materials, biomaterials, high-performance elastomers and polymers, materials physics, materials chemistry, optical/electronic/magnetic materials and other related topics. The work offers valuable up-to-date coverage of the topics.

目次

Preface and Committees Chapter 1: Composites Analysis of Numerical Simulation for Seismic Performance of MMCs A Numerical Approach for the Simulation of Cementitious Materials Analysis of Stress on Interface Crack of Orthotropic and Isotropic Bi-Materials Fabrication of Ti66V13Cu8Ni6.8Al6.2 Bulk Composites with High Strength by Spark Plasma Sintering and Crystallization of Amorphous Phase Hydration Kinetics Of Carbonized Spinel Carbon Brick With Al In Situ Fabrication of Particles Reinforced Al-Si-Al2O3 Composites by Hot Isostatic Pressing Improving Staircase Effect in the Process of Ceramic Laser Gelling Gas Barrier Properties of SiOX Films Deposited by RF Magnetron Co-Sputtering Experimental Study on Effects of Laminated Structure on Acoustic Insulation Property of Composites A Novel Approach to Disperse CuO onto the Zeolites Mordenite and Beta Dry Sliding Wear Resistance of NiMo/Mo2Ni3Si Intermetallic Composites Fabrication, Microstructure and Properties of Nitrides Bonded Alumina Castables by In Situ Nitridation Reaction Research on the Performance of SiAlON-Graphite-SiC Composites Fabrication of Barrel-Type Pre-Formed Shape of Al2O3f+Cf/ZL109 Composite Material -Cyclodextrin-Cross-Linked Polymer Microcolumn Dynamic Preconcentration/analysis for Trace Cadium Investigation on Cleansing the if Molten Steel with the Dispersed In Situ Phase Induced by the Composite Ball Explosive Reaction in RH Ladles Effect of Electromagnetic Stirring on Microstructure of In Situ Synthesized (Al2O3+Al3Zr)P/Al Composites Effect of La on Solute Segregation during Solidification of Al2O3*SiO2f/A356 Alloy Composite Effect of Fumed Titanium Oxide on Thermal Stability of Nano-Silica Thermal Insulating Composites Pressureless Infiltration Fabricated Steel Matrix Composites Reinforced with WC by the Local Electromagnetism Induction Heating A Study on the Influence of Different Anionic Surfactants on the AFM Scanning and Imaging of SWCNTs Sepiolite/CuFe2O4 Composite: a Magnetic Absorbent for Removal of Contaminants from Water Enhanced Room Temperature Magnetoresistance in La0.7Ca0.2Sr0.1MnO3/BN Composites Prepartion of Organophilic Bentonite / Paraffin Composite Phase Change Energy Storage Material with Melting Intercalation Method Impact Compressive Character of Balanced Angle-Ply Carbon/Epoxy Composites The Research for Bitmap and Vector Conversion Methods The Study of Welding Power-Arc System Stability Based on DFCD Evaluation of Sulfide Capacity Models and Application in Steelmaking Slags Research on Tunnel Effect of Carbon Black-Filled Cement-Based Composites Effect of ZnO-Loading Method on Methyl Orange Removal Capacities of Expanded Graphite/ZnO Composites Relation between Impact Properties and Interfacial Strength of UHMWPE/VE Composites Joining Aluminium to Titanium by MIG Welding-Brazing Process Removal of Methyl Orange from Aqueous Solution by Using Exfoliated Graphite/ZnO Composites Effect of ZnO-Loading Method on Adsorption and Decomposition Capacities of Expanded Graphite/ZnO Composites for Crude Oil Preparation and Characterization of A Metal-Based Al/Al2O3 Gradient Coating Investigation on the Alkali-Resistance Properties of Basalt Fiber Reinforced Plastics Bars in Concrete Flame Retardant ABS with a Novel Polyphosphate Derived from Biomass Effect of Preparation Technique on Methyl Orange Sorption Behavior of Exfoliated Graphite QSPR Study on Electric Spark Sensitivity of Nitro Arenes Preparation and Characterization of Al2TiO5- Si3N4 Composites by Reaction Sintering Process Mechanical and Tribological Properties of PTW/PTFE/PPS/PES Composites Effect of Silicon on Molten Iron Corrosion Resistance of Corundum-Silicon Nitride Composites Preparation and Study of Polyethylene Glycol (PEG)/Titanium Dioxide (TiO2) Phase Change Materials Investigation of Microemulsion System for Transdermal Delivery of Matrine Investigation of Phase Composition and Microstructure of the FeAl/Al2O3 Composites Fabricated by Mechanical Alloying and Plasma Active Sintering Process Microstructure of Directionally Solidified Ni-Ni3Si Hypoeutectic In Situ Composite Synthesis and Characterization of Tri-N-Octylamine-Intercalated -Zirconium Phosphate Study on Removal Arsenic from Iron Ore with Arsenic in Sintering Process Effect of Molar Ratio of MgO/Al2O3 on the Performance of MgO-Al2O3-Fe2O3 Composite Preparation and Isothermal Crystallization Behavior of Poly(lactic acid)/Graphene Nanocomposites Properties of PANI-PVA Composite Film Micro-Structure and Rheological Properties of HIPS Matrix Composites Filled with Magnesium Hydroxide Whisker Modified with Styrene via In Situ Polymerization Neural Network Based On the Improved Genetic Algorithm to Optimize Component Separation Conditions of Small Peptide Microstructure and Abrasive Wear Characteristics of In Situ WC Bundles - Reinforced Iron Matrix Composites Infiltration Casting and In Situ Fabrication of NbC Particulates - Reinforced Iron Matrix Composites Infiltration Casting and In Situ Fabrication of (Fe,Cr)7C3 Particulates Bundle - Reinforced Iron Matrix Composites The Mechanical Properties of Jute Fiber Mats Reinforced Vinyl Ester Resin Composites Residual Stresses in Locally Long Fiber Reinforced Aluminum Parts Tribological Property of a Triazine Derivative in Rapeseed Oil Implementation of Crack Problem of Functionally Graded Materials with ABAQUSTM Research on Mercury Emissions Regularity and Adsorbing Mercury by Activated Carbon in Coal-fired Power Plants Interface Bonding Properties of 25Cr5MoA/Q235 Bimetallic Compound Shaft Piezoresistive Properties of Cement Mortar with Carbon Nanotube Effect of Mo2C Content on Microstructure and Composition of Ti(C,N)-Based Cermets Mixing in Water Comparison of Fatty Acid and Antioxidant Property of Pawpaw Coconut Oil and Virgin Coconut Oil Research on Ceramic Matrix Composites (CMC) for Aerospace Aplications The Study of Post-Fire Load Bearing Capacity of Steel Column under Axial Compression Exposure to one-Side Fire Fabrication of Pressureless Sintered -Sialon-ZrO2 Composites Static and Dynamic Responses of a Composite Engine Mounting Structure Secondary Energy Analysis of Typical Steel Manufacturing Process The Mechanical Properties of Epoxy/ Fiber Composites Influenced by Ageing Effects on Coatings Effects of Nanoparticles TiN on the Crystallization Behavior of PET Nanocomposites Carbon Nanotubes Containing Metal Nanoparticles-Graft-Hyperbranched Polyglycerols Nanocomposites Study of Thermal Properties of Curing of DGEBA Epoxy Resin with Hexakis-(4-Aminophenoxy)-Cyclotriphosphazene Thermodynamical Analysis of the Reaction between AlN and ZrO2 and Experimental Substantiation Research on Processing Technology of Polyester Fabric Reinforced Polypropylene Thermoplastic Laminated Composites New Method of Preparation and Property Study of the Montmorillonite Modified with CTAB Preparation and Damping property Study of Styrene-Acrylic IPN/Mt Nano-composite Material Microstructure and Properties of Nano Al2O3-Cu/Cr Composite Monte Carlo Study on Thermal Transport in Si/Ge Superlattice Basing on Phonon Dispersion Discrepancies Certification for Effect of Environment on Composite Properties Processibility and Mechanical Properties of Mullite-Filled Styrene Butadiene Rubber Composites Theory Calculation of Diffussion Coefficient Based on Molten Slag Structure The Design for the Main Reaction System of a New Welding Material Ultrafiltration of Produced Water from Polymer Flooding with Hydrophilized Polyvinylidene Fluoride Membrane for Reuse Dispersion and Preparation of Polyurethane/Carbon Nanotubes Composites Dynamic Mechanical Property of Quasi Constrained Layer Structural Piezoelectric Ceramic/Carbon Black/Epoxy Resin Composites Mathematical Model for Evaluating Cylindricity Errors by Minimum Zone Method Method on Accelerated Rupture Life Evaluation for Composite Material Based on Type-II Censored Data Optimal Design of Sisal Fibre Reinforced Resin Matrix Composite Controllable Fabrication of -MnO2 Microspheres and -MnO2 Nanorods Application of Coal Mine Comprehensive Monitoring System Based on OPC Preparation and Characterization of Poly(Vinyl Alcohol)(PVA)/Hydroxyapatite (HA) Nanofibrous Scaffolds Preparation and Characterization of Graphene Nanoplatelet/Magnetite Compound Powders Research on the Application of Cement Stabilized Cool Regeneration of the Highway Maintenance Experimental Study on Continuous Annealing of High-Tensile Cold Rolled Bake-Hardening Steel Study on Space Copper-Based Powder Metallurgy Friction Material and its Tribological Properties Influence Factors for the Preparation of Kaolinite-Formamide Intercalation Analysis of Stresses for Cross-Ply Laminates with a Matrix Crack under Bending Effect of Three Catalysts on Synthesis of Silicon Carbide Whiskers with Silica Fume Effects of Gd on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy Analysis of Break Impact Load on Composite Insulators Used as Tension String Effect of PA6 Addition on the Mechanical Properties of PMMA Blends The Effect of TiO2 on the Mechanical and Tribological Properties of PA66 Nanocomposites Program for the Analysis of Wind-Induced Vibration of Steel Roof Structures Research on Crack-Resistance Property of Asphalt Mixture as Road Stress-Absorbing Interlayer The Distribution of Microstructure and Mechanical Properties of Carbon-Carbon Composites Spark Plasma Sintering of Mixed and Milled WC-Co Micro-/Nano-Powders Deformation Behavior of a Multiphase Fine-Grained Mo-Si-B Alloy The Effect of Injection Molding Process Parameters on the Buckling Properties of PBT/Short Glass Fiber Composites Study on the Mechanical Properties and Creep Behaviour of Carbon Fiber Nano-Composites The Grain Rotation Behavior of CuY0.8 Nano Alloys in the Process of Plastic Deformation Electrochemical Properties of Polyaniline/ -Zirconium Phosphate Nanocomposite and the Effect of pH Values TiC Particulates Prepared by Self-Propagating High Temperature Synthesis Electrochemical Properties of Zinc-LaCoO3 Electrode for Alkaline Zinc-Based Battery The Properties of Coarse Grain Heat Affect Zone of Pipeline Steels with Excellent Deformability under Different Welding Heat Input Isotropic Pyrolytic Carbon Fabricated by Developing Self-Heating Plates Chemical Vapor Deposition Preparation and Characterization of N Doped TiO2/ Sepiolite Composite Materials Synthesis of [6,7]-Dihydro-[1,4]-Dioxino-[2,3-f][2,1,3]-Benzothiadiazole: A Novel Building Block for Electron-Poor Conjugated Polymers" Experimental Investigation of Impacted and Non-Impacted Composite Laminates under Compressive Loading Friction Properties of Carbon Nanotubes Reinforced Nitrile Composites under Water Lubricated Condition Microwave Modified Timber: Collaborative Research Integrating Product Design for New Materials Development The Research of Spraying SiC/Cu Electronic Packaging Composites Properties of Waterborne Polyurethanes: Effect of NCO/OH Ratio Composite Behavior of Concrete Slab with Steel Decking under Flexural Loading Numerical Simulation Research of Flexible Shield Support Lateral Caving Technology Effect of TiO2 on Mechanical Properties and Microstructure of Magnesium Aluminate Spinel Refractories Chapter 2: Micro/Nano Materials Preparation of Ultrafine Cobalt Ferrite Particles by Solution SHS Method Effects of Amino Acids in the Defined Medium on Cellulose Production by Acetobacter xylinum Two-Step Green Hydrothermal Synthesis of ZnO Powders Molecular Dynamics Simulation on Micro Couette Flow of Nanofluids Microstructural Characterization and Properties of Silica Aerogels Doped with Nano-ITO Powder Solvothermal Synthesis of Mn-Doped CdS Nanorods Using Single-Source Molecular Precursors Cracking Behavior of Oxide Films under Applied Stress MoB/CoCr Coating by Low Pressure Plasma Spraying against Erosion by Molten Al-12.07wt.%Si Alloy Spontaneous Oxidation Route to Se/Te Alloys Nanorods at Room Temperature Preparation of -Ni(OH)2 with Flowerlike Hierarchical Architectures via Homogeneous Precipitation Method Preparation of Chrysotile Nanotubes under Hydrothermal Condition Oxidative Dehydrogenation of Cyclohexane over Mg-V-O Catalysts Prepared via Citriate Complexation A Facile, Green Route - Electron Beam Irradiation to Nanocrystalline Cadmium Selenide at Room Temperature Growth of Carbon Nanofibers with Ordered Macroscopic Structures by CVD Technique CuO-CoO-MnO/SiO2 Nanocomposite Aerogel as Catalysts Carrier and Its Cocatalysis Mechanism in the Synthesis of Diphenyl Carbonate The Research of Nanophotonic Grating Vertical Coupling Hierarchical Structures of Silicon Oxynitride Nanowires Formed by a Gallium-Catalyzed In Situ Reactive Technique Synthesis of MnWO4 Nano-Particles by Low-Temperature Molten Salt Method Effect of Particle Size on Oxidation Reaction Kinetics Parameter of Cu2O Powders Synthesis of Nano-Crystalline Magnesium Chromate Spinel by Citrate Sol-Gel Method Synthesis of Nanocrystalline InVO4 by Hydrothermal Process and its Visible-Light Photocatalytic Activity Preparation of TiO2 Nanocrystalline Powder with High Specific Area Using Urea as the Template Morphology of ZnO Controlled by Anion of Simple Zinc Salt Microwave-Assisted Preparation of Cu2O Octahedral Microcrystals Organic Soft Template Method to Arrange Palladium Nanoparticles on Single-Walled Carbon Nanotubes Novel Mechanochemical Synthesis of Carbon Nanomaterials by a High-Speed Ball-Milling Comparison of Precipitants in Preparing Ultrafine ZnO Powder Step-Scan DSC Study on the Melting Behavior of Polypropylene/Attapulgite Nanocomposites Synthesis of Polystyrene-B-Poly(Ethylene Oxide)monomethyl Ethermethacrylate Block Copolymers and its Self-Assembly in Aqueous Solution Batch Supercritical Hydrothermal Synthesis of CeO2 Nanoparticles Effects of Anion on the Morphologies of ZnO Synthesized by an Aqueous Solution Method Research on Pollution-Free Separation of Wheat Straw Cellulose by Ethanol/Acetic Acid Solvent System Effects of Synthesis Parameters on Controllable Growth of Highly-Ordered TiO2 Nanotube Arrays Investigation of Morphology of Vetier (Vetiveria zizanioides) Cellulose Micro/Nano Fibrils Isolated by High Intensity Ultrasonication Enhancement of Thermal Conductivity with Carbon-Encapsulated Copper Nano-Particle for Nanofluids Selective Oxidation of Cyclohexane to Cyclohexanone and Cyclohexanol over Au/Co3O4 Catalyst Dispersibility of Nano TiN Powder in Ethanol Liquid Electronic Transport Properties of the Azobenzene-Based Optical Molecular Switch with Different Substituents Research on Solvothermal Synthesis of Phase Composition Controllable Nanocrystalline TiO2 Powders Improvement of Tribological Behaviour of Biomedical Nanocrystalline Titanium by Magnetron Sputtered CNx/SiC Double Layer Films Sonochemical Synthesis of Nanocrystalline MgSeO3 and its Photocatalysis Behavior Periodic Changes Effects of Distance between Magnetic Barriers on Electron Transport in Nanostructure Fabrication and Characterization of YAG Nanopowders by Co-Precipitation under Ultrasonic Radiation Chapter 2: Micro/Nano Materials The Characteristics of Natural Occurred Carbon Nanotubes - from Transmission Electronic Microscopy and Raman Spectroscopy Micro-Stress Transfer of CNT and CNT-Interface in CNT Reinforced Mg-Matrix Composites Experimental Research on the Relationship between Dielectric Constant and Compressive Strength of Cement Concrete Materials Microstructure and Magnetic Behavior of One-Dimensional Co0.5Zn0.5Fe2O4 Nanofibers Microwave-Assisted Synthesis and Photocatalytic Activity of Quantum-Sized ZnO Simulation of Electron Transport in Silicon using Monte Carlo Method Characterization and Electrochemical Properties of Nitrogen-Doped Ordered Microporous Carbons Containing Well-Dispersed Platinum Nanoparticles Preparation of Ultrafine ZnO Powder by Precipitation Method The Microstructure and Mechanical Properties of ZrAlN/Cu Coating Sol-Gel Synthesis and Characterization of Silica Materials Using Surfactant-Like Organic Acid Compounds as Templates Comparison of Reactively Sputtered HfO2 and HfSixOy Dielectrics for High Density Metal-Insulator-Metal Capacitor Applications Controlled Synthesis of Hollow TiO2 Nanospheres Templated by Polymeric Micelle with Core-Shell-Corona Architecture Effect of Nano-Graphite on Friction Performance of Cu-Based Friction Material Synthesis and Catalytic Properties of FeZSM-35 Zeolites Directed by Alkyl-polyamine Triethylene-tetramine Influence of Rolling Reduction Ratio on Continuous Confined Strip Shearing Deformation Procedure Using Finite Element Analysis Morphology and Properties of Carbon Nanotubes Modified Epoxy Gas-Electrospun Degradable PEG/PBT-HA: Potential Scaffold for Tissue Engineering Research on Fault Diagnosis System for Mine Hoist Bayesian Network Learn Method for Machine Tool Thermal Stability Modeling Synthesis and Catalytic Property of V-MCM-41 Mesoporous Molecular Sieves by Atrane Route Characterization and Thermal Properties of the Microencapsulated PCM Slurry Study on the Preparation of Ultramicro Molybdenum Nitride Powder and Wear Properties of Its Coating Characteration of Protein Loaded Chitosan Nanoparticles at Different pH Values Growth and Photoluminescence Properties of ZnO Microrods Synthesis of Nanocrystalline Silver by Warm-Vacuum-Compaction Method Multidisciplinary Design Optimization Method and Algorithm Based on iSIGHT Preparation of Spheric and Hollow TiO2 Electrophoretic Nanoparticles Preparation of TiO2 Films on Quartz Glass Plate and Its Study of Photocatalytic Properties in Ultrasound Preparation And Photoelectric Properties Of CuCr2O4 Nanopowders Investigation of Ultrasonic Electroplating Ni-P Coatings on Nd-Fe-B Permanent Magnet Effects of Fly Ash Particle Sizes on the Compressive Strength and Fracture Toughness of High Performance Concrete Antioxidative Activity Evaluation of CoQ10-Nanostructured Lipid Carrier Microstructure and Tensile Properties of Ultrafine Grained Pure Al Sheets Produced by Accumulative Roll Bonding Experimental Study on Strengthened Bridge Structures with Carbon Fiber Plate Research on Tribological Properties of Serpentine Particles as Lubricating Oil Additives Synthesis of H-In2O3 and C-In2O3 by Different Methods and Gas Sensing Properties Synthesis of C60-Doped Polyaniline Nanoshuttles Facile Solvothermal Route to Synthesize Indium Tin Oxide Nano-Plates, Nanoparticles and Nanorods Chapter 3: Iron and Steel Effect of Magnesium on Characteristics of Thermal Analysis Curve of Compacted Graphite Iron The Influence of Critical Turning Point of Argon Flowrate Ascension on Decarburization Rate of RH Treatment for Ultra-Low Carbon Steel Research on Key Technologies of 38CrMoAl Steel Produced by BOF-LF-RH-CC Process Experimental Study of Softening and Melting Properties on Indonesia Vanadium-Titanium Sinters Resistance Matrix of Micro-Carbon Steel Rolled in Ferrite Region Determination of IMC-80BH Corrosion Inhibitor Concentration and Practical Application in Gas Field Effect of Cooling Rates after Finish Rolling on Microstructure and Properties of Microalloyed Steels Used for Fracture Splitting Con-Rods Thermodynamic Analysis on Precipitation of Nonmetallic Inclusions in Gear Steel Fabrication of Electroconductive Si3N4-TiN Ceramic from Iron Ore Tailing Physical Modeling of Fluid Flow Characteristics in a Delta Shaped, Four-Strand Continuous Casting Tundish with Different Flow Control Devices Minimum Al Content for Forming Alumina Scale on Creep Resistant Ferritic Steels at 650 DegreesC Effect of Austempering Temperature on Microstructure and Properties of Carbidic Austempered Ductile Iron The Research on Long Life for Top and Bottom Combined Blown Converter on Semi-Steel Steelmaking SEM In Situ Investigation on Fatigue Cracking Behavior of X80 Pipeline Steel with Inclusions The Effect of Large Reduction on the Microstructure and Properties for As-Hot Rolled Dual-Phase Nb-Bearing Steel Research On The Requirement Of Impact Toughness For Petroleum Drill Pipe Steel Used In Critical Sour Environment Influence of Titanium Compounds on Melting and Crystalline Temperature of Mold Powder Research of Transverse Corner Crack and Optimization of Concasting Process for Bloom of Peritectic Steel Q235D Study on Mechanical Properties of Ribbed Cast Steel Spherical Joint in Complex Stress State Effect of Ce on the Mechanical Properties of 1Cr18Mn8Ni5N Stainless Steel Study of Scale Effect on the Iron Oxide Reduction Study on Effect of Pulse Electric Field on Solidification Process of Fe-C-S Alloy Melt Effect of Slag-Metal Reaction on Transformation of Al2O3 inclusions in Pipeline Steel Fatigue Crack Propagation Analysis of X60 Pipeline Steel Pipelines with Defects BF Charge Reduction with Gases of Different H2 Ratio in High Temperature Zone Exploiting a Simple Spectrophotometric Method for the Determination of Manganese in High Strength Line Pipe Steels Numerical Simulation of Temperature in the Freeboard of COREX Melting Gasifier Fundamental Study on Extracting Vanadium from Vanadium-Bearing Titanomagnetite Effect of Nb on Microstructure Evolution of Coarse-Grained Heat-Affected Zone with Large Heat Input Welding Preparation of High Silicon Steel by Pulse Electrodeposition in Molten Salt Study on the COREX Melter Gasifier Zones Using Temperature Gradient Effect of 0.06%Nb on the Microstructure and Mechanical Properties of Mn-Series Low Carbon Air-Cooling Bainitic Steels An Iterative Algorithm to Determine Hot Strand Pressures during Continuous Casting of Round Blooms Study of Mold Fluid Flow on a New Type Nozzle Bottom in Continuous Casting of Steel Optimizing of Flow Control Devices in a Single Strand Continuous Casting Tundish Research on Steelmaking Dust Based on Difference of Mn,Fe and Mo Vapor Pressure Effects of Rare Earth on the Impact Toughness of High-Carbon Steel Study on Thermal Deformation and Recrystallization Behavior of Cu-P Weathering Steel Effects of B-Mg Additive on Metallurgical Properties of Oxidized Pellets Study of Reduction Characteristic on Microwave Magnetizing Roast of Hematite Effect of Process Parameters on Microstructural Evolution and Grain Refinement in a Low Carbon High Strength Microalloyed Dual Phase Steel Study of Low Carbon Steel on Microstructe of Slag Film Study on the Influence of Inclusion and Void on Fatigue Life of Bearing Steel Using Statistics of Extreme Values Three Dimensional Simulations on Stress Distribution and Fatigue Damage Life of Wheel/Rail Contact Region Adaptive Neural Network Modelling in Fatigue life Prediction under Load History effects Effect of M/A Constituents on Mechanical Properties of High Grade Pipeline Steel Precipitation Hardening of Titanium Carbides in Ti Micro-Alloyed Ultra-High Strength Steel Study on Sulfur Existing Form in Sinter Experimental Study on Tundish Flux System for High Al-Containing TRIP Steel's Slab Casting Study on Smelting High-Al Cold Heading Steel SWRCH6A Using Single-Slag Process Effects of Modification on Stress Field of the Inclusions in Large Rudder Arm Steel Casting Metallographic Analysis of Non-Orientation Silicon Steel W20 in Different Shearing Deformation Area Numerical Simulation of Nozzle Clogging of Ferritic Stainless Steel Influence of Sijiaying Iron Ore on the Structure of Sinter Chapter 4: Ceramic Study on Preparation and Characterization of YAG Ceramic Synthesized by Co-Precipitation Preparation of Fine Ag2WO4 Antibacterial Powders and Its Application in the Sanitary Ceramics Preparation and Characterization of Zircon Ceramic Doped with Cerium Potential Applications of Foam Ceramics in Gas Explosion Prevention The Effect of Yb2O3 Addition on Sintering of MgO Ceramic Fabrication of High-Porosity Silicon Nitride Ceramics with Excellent Mechanical Properties Effects of Second Phase and Defect on Electrical Properties in Bi0.5Na0.5-xKxTiO3 Lead-Free Piezoelectric Ceramics Effect of Compound Additives of Li2O-B2O3-SiO2 Glass and LiF on the Properties of CaO-Li2O-Sm2O3-TiO2 Ceramics Characterization and Mechanical Properties of TiN/O'-Sialon Ceramics Prepared from High Titania Slag Preparation of Porous Catalyst Support with Gangue of Bauxite Tailing The Effect of Bending Radius on Thickness Distribution in Hydroforming of Conical-Cylindrical Cups Influence of Nano-Y2O3 on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic Materials The Influence of Different Particle Size of Carbon Powders on the Preparation of Porous Silicon Carbide Ceramic Influence of Poling Conditions on the Characteristics of PZT Ceramics Preparation of Porous Silica by Acid Dissociation of Thermally Activated Kaolinite Finite Element Simulation and Experimental Study of the Effect of Cone Angle on Thickness Distribution in Hydroforming of Conical-Cylindrical Cups The High-Performance of Cerium Doped Sodium Bismuth Titanate Aurivillirs Phase Material Influence of Heat Treatment on Glaze Melting Characteristics The Research on High Pressure Sintering of Mixed Powder -Si3N4 and -Si3N4 Function Basis for Mechatronic System Design Effect of La2O3 on the Microstructure and Electrical Properties of 0.82Bi0.5Na0.5TiO3-0.18Bi0.5K0.5TiO3 Ceramics Formation Mechanism of Porous Silicon Carbide Ceramic Synthesized by Coat-Mix Process As(III) Removal from Low-Arsenic Concentration Drinking Water by Coagulation with Quadrivalent Titanium Coagulants Alumina Gelcasting by Using Glutin-Urea System The Study of the Oxygen Permeability of Ba0.5Sr0.5Co0.8Fe0.2O3- Membranes after Laser Ablation Preparation of Glass-Ceramics Using Molybdenum Tailings Structural Characteristics and Dielectric Properties of Nd-Doped SrTiO3 Ceramics by Introducing Ti Vacancies for Valence Compensation Structure and Microwave Dielectric Properties of (Ca0.9375Sr0.0625)0.25 (Li0.5Sm0.5)0.75TiO3 Ceramics with B2O3-CuO Sintering Aids Influence of Different Precursors upon Characterization of Bismuth Titanate Powders Prepared by Chemical Methods Molten Salt Synthesis of Anisotropic Bi4Ti3O12 Particles Analysis of PZT Piezoelectric Ceramics Based on Finite Element Softeware ADINA Preparation and Dielectric Properties of Li2O Doped BaZr0.25Ti0.75O3 Ceramics Phase Stability and Dielectric Properties of Low Temperature Fired BaTi4O9 Microwave Material with Copper Electrodes in Reducing Atmosphere Synthesis of ZrTiO4 and MgAl2O4 Powders via Non-Hydrolytic Sol-Gel Route Using Alcohol as Oxygen Donor Chapter 5: Metal alloy Materials Preparation of High-Purity Titanium by Molten-Salt Electrolysis Process Research on Transient Behavior of Aluminium in Laser Micro-Molton Pool The Wear and Drag Prediction of the 2D Micro-Asperities on Textured Wall Effect of Conventional Cold Rolling on Wear-Resisting Performance of High Manganese Steel A Channelized Deadlock Prevention Policy for Flexible Manufacturing Systems Using Petri Net Models Microstructure Evolution of ZK60M Twin-Roll-Casted Magnesium Alloy during Hot Compression and Annealing Influence of Boron on the Micro-Organization Mechanism of Zirconium Containing Aluminium Alloy A Practical and Selective Method for the Analysis of Molybdenum in Grade T91 Tube and P91 Pipe Intended for Power Plants Study on Over-Burnt Temperature and Heat Treatment of a New Al-Mg-Si-Cu Alloy Study on Thermal Simulation of a New Al-Mg-Si-Cu Alloy Effect of Desorption Hydrogen Pressure on Anisotropy of HDDR-Treated Nd-Fe-B Powders Effect of Y on Microstructure and Corrosion Resistance of AZ61 Magnesium Alloy Effects of the Vibration and Low Pressure on Solidification Microstruction of Zinc-Aluminum Alloy Effects of Anisotropy on the Microstructural Characteristics and Mechanical Behavior of Shock-Loaded of AZ31 Alloy Correlation of Dynamic Response with Adiabatic Shearing Behavior in Ti-10V-2Fe-3Al Alloy The Oxidation of Co-10Cr Alloys in 1 Atm of Pure O2 at 700 and 800 C Corrosion of Amorphous Fe73.5Si13.5B9Nb3Cu1 Alloys on the Synergistic Effect of Chloride and Hydroxyl Ions Effect of Er on Ignition-Proof Property of Mg-Zn Alloys Preparation and Characterization of As-Cast and Hot-Rolled Mg-5Al-0.3Mn-1Ce Alloy Microstructure and Creep Property of As-Cast Mg-6Al-XSr(x=0, 2, 3) Alloys Influence of Y Element on Microstructure and Mechanical Properties of ZK60 Alloy Analysis of LIGA-Ni Microstructure Dynamic Deformation Behavior of As-Extruded Mg-Gd-Y Magnesium Alloy and the Microstructural Evolution Microstructures of Low Angle Boundaries of the Second Generation Single Crystal Superalloy DD6 Influence of Fe on the Formation of Nucleation in Carbon-Inoculated Mg-3%Al Alloy Study on the Intergranular Corrosion Behavior of Welding Joint of A7N01-T4 Al-Alloy for High-Speed Train Investigation on the Microstructure and Mechanical Properties of Hot Forged Mg 8Gd 2Y 1Nd 0.3Zn 0.6Zr Alloy On the Microstructure of Heat-Treated Austenitic Nickel-Base Alloy Study on the Law of Phrase Transformation of High-Carbon Matrix Steel 4Cr-3Mo-3V-2W Effect of Cerium on Microstructure and Wearing Resistance of 5CrMnMo Hot Working Die Steel Effect of Thermo-Mechanical Heat Treatment on Microstructure and Mechanical Property of 2197 Al-Li Alloy Study on the Initial Discontinuity State Distribution of LY12CZ Aluminum Alloy On the Oxidation Behaviors of MoSi2 at 673 - 873 K Enhanced Tensile Ductility of AZ80 Magnesium Alloy Experimental Study of Squeeze Casting of ZK60 Magnesium Alloy Materials with Thermo-Diffusive Hardening Influences of Complex Modification of RE and P on the Wear Resistance of Hypereutectic Al-24Si Alloy Effect of Melting Process on Zr Content and Grain Refinement in ZE41A Alloy Spark Plasma Sintering of Al6061 and Al2124 Alloys Effect of Quenching on the Corrosion Morphology of Al-Zn-Sn-Ga Anode Alloy Study on Regeneration Ability of Oxidation Film on Ignition-Proof Magnesium Alloy Added with RE Influence of the Strain Rates on Tensile Properties and Fracture Interfaces for Mg-Al Alloys Containing Y The Effects of Cooling Holes on the Creep Life in a Modeling Specimen of Single Crystal Air-Cooled Turbine Blade EBSD Study on Boundaries and Texture of 1235 Aluminum Alloy Affected by Strain Rates Chapter 5: Metal alloy Materials Effects of Bi on Mechanical Properties of Magnesium Alloy AZ81 Research of Hot Ductility for ML40Cr with Cold Forging Steel Study on Corrosion Behavior of Al-Zn-In and Al-Zn-Ga Alloys in NaCl Solution Chapter 6: Biomaterials Miscibility Study of Polymer Blends Composed of Polyethylenimine, Polyethyleneglycol, and Carboxymethyl Chitosan Studies on Methyl Methacrylate Grafted onto Chitosan by Ceric Ion Initiation Preparation and Characterization of PMMA-b-PDMAEMA/Polysulfone Composite Membranes by RAFT Polymerization and their Permeation Performance of Carbon Dioxide Thermalstability of Polyclonal Antibody to Salmonella typhimurium on a Magnetostrictive Sensor Platform Synthesis and Characterization of Polyesteramides Containing 5-Fluorouracil in the Main Chain Effect of Blending Modification on Tensile Performance of CPE/PVC Two Step Synthesis of Hydroxyl Group Polyimide Based on 2,2-Bis(Amino-4-Hydroxyphenyl)hexafluoropropane Structural Characteristics of Pheomelanin-Like Pigment from Lachnum singerianum A Review on Synthesis and Property of Polyurethane-Imide Preparation and Characterization of Polylactic Acid/Acetate Starch Blends with Tetrabutyl Titanate The Influences of Double Modification on Carbon Fiber Surface and Microorganism Immobilization Behavior Preparation of Chitosan - Hydroxyapatite Nanocomposites Bioceramic Hydroxyapatite Granules for Purification of Biotechnological Products Release of Anticancer Drug Doxorubicin from Biodegradable Polymer Coated Porous Hydroxyapatite Scaffolds Mechanical Properties and Ordered Structure of Bacterial Poly(3-Hydroxybutyrate-Co-3-Hydroxyhexanoate) Fibers Stretched after Isothermal Crystallization near Tg Effects of Microcrystalline Cellulose on the Thermal Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Synthesis and Characterization of the Water-Soluble Oleoyl Acetyl Chitosan Thermal and Mechanical Properties of Bagasse Microcrystalline Cellulose Reinforced PLA Composites Preparation and Characterization of Nano-TiO2/PE Antibacterial Films Assembly of Type I Collagen on PVA Film Induced by Glutaraldehyde Vapor Study on the Preparation, Property and Drug Release Carrier of Chitosan-Based Nanoparticles for Cancer Treatment High Temperature Resistance of Epoxy Adhesives under the Room-Temperature Curing Preparation and Application of Hydrophobically Associating Cationic Polyacrylamide Directing Human Chondrocytes Cell Behavior by Fabrication of Protein Micropattern on Polystyrene Surfaces Synthesis of a Glycodendrimer with Five Repeating Mannoside Units S-Scan of Ultrasonic Phased Array Testing for Electrofusion Joints of Polyethylene Pipes Effect of Cross-Linking Degree on Hydrogels using Surfactant Detergent as Template Flame Retardance and Thermal Decomposition of EVA Composites Containing Melamine Phosphate and Dipentaerythritol The Effect of Triton (R) X-100 on CNT/PP Composite's Electrical Conductivity Preparation and Properties of PS/PSEG Composite Materials The Synthesis and Characterization of Thiophene Derivative Polymers Imprinted -Cyclodextrin Polymer for Recognition of Naringin Effect of Peroxide Content on Morphology and Properties of Thermoplastic Vulcanizates Based on PP and NR Chapter 7: High Performance Elastomers & Polymers Synthesis of Carbazoled Poly(Arylene Imino) Synthesis of Poly(Aryl Sulfone Benzimidazole) Sulfone Analysis of Performance of PR.S Asphalt Mixture and Application Poly(Ethylene Oxide)-B-Poly( -Caprolactone) Amphiphilic Block Copolymers: Synthesis and Self-Assembly Study on Preparation and Properties of Polystyrene/Styrene-Ethylene/Butylene-Styrene Composites Studies on the Solubility of Bonded-Rare Earth Complexes and Fluorescence Properties of their Copolymers Synthesis, Characterization and Isothermal Crystallization Kinetics of Poly(Dodecamethylene Terephthalamide) Synthesis and Properties Epoxy Resin/Mesoporous Silica-Organic Clay Nanocomposites Ultrafine Pd Nanoparticles Synthesis and Catalytic Performance in Methane Partial Oxidation Isothermal Crystallization Kinetics of Poly (Phenylene Sulfide)/TiO2 Composites Synthesis and Characterization of Glucose and Acrylamide Copolymer Thermal Degradation Kinetics of Poly(Arylene Ether Nitrile) and its Crosslinked Polymer Effect of Amphoteric Acrylic Retanning Agent on the Physical Properties of the Resultant Leather Research on Al2TiO5-Si3N4 Composites Fabricated by Reaction Method Effect of Calcium Stearate Concentration on Cure Properties of Epoxidized Natural Rubber Static and Dynamic Mechanical Properties of Chlorobutyl Rubber Composites with Variable Sulfur/Accelerator Ratio Research on Properties of Liquid Crystalline Polymers as New Packaging Materials Research Development on Heating System of EVs Battery Pack Experimental Study on the Anti-Permeability Properties of Polymer Grouting Materials Preparation and Magnetic Properties of the Core-Nanoshell Composite Materials Doped with Nd Preparation of a Certified Reference Material of Trifunctional Polypropylene Oxide Mechanism of the Modulus Increase of Carbon-Black-Filled Rubber at Small Extension Finite Element Analysis and Optimization of Spreading System of Rapid Prototyping Machine for Ceramic Parts Based on ANSYS Chapter 8: Materials Physics Preparation and Performance of Polyethylene Glycol / Polyacrylamide Phase Change Material Elastic Properties and Electronic Structure of L12 (Al,Si)3Sc Effect of Surface Treatment for Carbon Nanotubes on Morphological and Rheological Properties of Polyarylene Ether Nitriles Nanocomposites Modeling Radial Variation in Microfibril Angle of Scots Pine Light Yield Non-Proportionality and Energy Resolution of Lu1.8Y0.2SiO5:Ce and LaCl3:Ce Scintillation Crystals Comparison of Lu0.7Y0.3AP:Ce and Bi4Ge3O12 Scintillators in Gamma Ray Spectrometry The Surface Characteristics and Friction Properties of PTFE Yarn Study on the Influence of Rheological Properties on the Printing Quality of Ink The Effect of the Proportion of Prepolymer and Monomer on the Performance of UV Offset Ink Induced Amorphization in Pyrographite by Radiation Using High Voltage Transmission Electron Microscope Electronic Structure of CdSe/CdXZn1-XS Core/Shell Quantum Dots Factors Influencing Dye Colors The Spin-Dependent Electronical Conductivity of Polarons in the Spin Polarized Organic Semiconductor Numerical Study on Characteristics Shock Initiation of Double-Shell Charges by Hypervelocity Impact Traveling Wave Exact Solutions for Nonlinear Coupled Scalar Field Equations A Method of Reducing Volatile Compounds in Polypropylene Packaging Materials Lu1.8Y0.2SiO5:Ce and LaCl3:Ce Scintillators for Gamma-Ray Detection Chapter 9: Materials Chemistry A Study on the Photolysis Behavior of Photoacid Generators High-Efficiency Modified Alkyd Resin Application Research Investigation on Direct Electrolytic Reduction of the CaTiO3 Compounds in Molten CaCl2-NaCl for the Production of Ti Capacitive Performance of Ordered Mesoporous Carbons in Ionic Liquids Study on Character of Ilmenite Modified by Thermal Treatment Corrosion-Deformation Interactions (CDI)of AA2024-T3 in Chloride Media CO2 Adsorption Performance of N-Doped Ordered Microporous Carbons Templated from Zeolite HY Preparation Research of CaB6 Powder by Self-Propagating High-Temperature Synthesis Study of Synthesis and Properties on Poly L-Glutamate Initiated by Aniline Study on the Electrochemical Behaviors of CeO2 in Eutectic CaCl2 - NaCl Melt Study on the Chemical Constituents of Apocynum venetum Bark Experimental Study on the Fire Characteristics of Indoor Combustible Materials Study on Recovery of Vanadium from Low-Vanadium Slag by Calcified Roasting Methods Electrochemical Behavior of Tubular Steel Corrosion in Brine Containing High Contents of H2S and CO2 Characteristics of Calcium Carbonate Crystal Structure and Size Distribution in Solution under the Electromagnetic Field Sol-Gel Synthesized Fe-P-O Catalyst for the Benzylation of Benzene with Benzyl Chloride Direct Electrochemical Preparation of Chromium Powder in Molten Salts Chapter 10: Optical/Electronic/Magnetic Materials Synthesis and Photoluminescence Properties of Hierarchical Bis(8-Hydroxyquinoline) Nickel Flower-Like Structure Identification of White Light Emission with Two Complementary Colors in Organic Light-Emitting Devices Study on Phase Composition of Long Persistence Phosphors SrAl2O4:Eu2+,Dy3+Synthesized by Combustion Synthesis Method Analyses of Transmission Characteristics of a Magneto-Optic Material Used for Faraday Optical Filters at 532nm Analysis of Recovery Current Related to Core Material and Structure of DC Power Supply in High Voltage Active Electronic Current Transformer Preparation of Ta-Ti Co-Doped VO2 Polycrystal Thin Film with High Resistance Temperature Coefficient and without Hysteresis Comparative Study of the Properties between Transparent Conducting ZnO:Zr and ZnO:Al Films Deposited by DC Magnetron Sputtering Preparation and Corrosion Resistance of Electroless Plating of Ni-Cr-P/Ni-P Composite Coating on Sintered Nd-Fe-B Permanent Magnet X-Ray Photoelectron Spectroscopy of (La0.7Sr0.3)MnO3Thin Films Prepared by Pulsed Laser Deposition Novel Terbium-Cerium Coordination Polymer: Synthesis, Characterization and Fluorescence Properties Electrical Behaviors of LEDs Prepared by Wide-Band GaN Material Microstructure, Magnetic and Optical Properties of Metal/ Semiconductor Magnetic Granular Film Synthesis and Properties of 1,4-Bis(2'-Aryl-1',3',4'-Oxadiazole)-1,3-Butadiene and its Analogues Effect of Alkali Hydrogen Peroxide Pre-Extraction on APMP Pulping Process of Pink Sheets Bamboo Bifunctional Fe3O4@SiO2@Eu-Polyoxometalates Nanoparticles and Study on their Magnetism and Luminescence A Lead Free Graphite Conducting Paste for Screen Printing Study on the Electro-Optcial Properties of GH LCD A New Photochromic Diarylethene for Reversible Molecule Switching Properties Based on Pyrrole and Thiophene Saint Venant Solutions in Symmetric Deformation for Rectangular Transversely Isotropic Magnetoelectroelastic Solids Three-Dimensional Optical Bit Memory in Sm(DBM)3Phen-Doped and Un-Doped Poly(methyl methacrylate) Investigation of V Residence in Sr2(Fe1-XVX)MoO6 Compounds Mn3+ Ion Co-Doped in Y3Al5O12Ce3+ Phosphor to Enhance the Red Spectral Emission Thermoelectric Properties of Cu-Substituted Bi2Ca2Co2Oy Misfit Oxides Preparation of Manganese Ferrite Powders by Mechanochemical Process Electrochemical Deposition Mechanism of Polyaniline at High Potential in Organic Electrolyte Research on Photoluminescence Characteristics of the Active Cl-Doped ZnS Microstructure of In Situ Al3Ti0.4Zr0.6p/Al Fabricated with Electromagnetic Field Chiral Liquid Crystal Polymers Containing Electron Donor- Acceptor Action-Synthesis and Characterization Structures and Electronic Spectroscopy of Rhodium-Based Complexes: a Theoretical Study on Promising Optical Materials Preparation of Polymethyl Methacrylate-NaYF4:Yb:Er Composite Material Used for Holographic Display Dielectric Properties Investigation of Mg-Doped Barium Titanate Ceramics Improvement of Giant Magneto-Impedance Effect in Fe-Based Nanocrystalline Wires Growth of KNbO3 Crystal by a Pulling down Method Improvement of Magnetic Properties of La3+-Co2+ Substituted SrFe12O19 Reduced-Pressure Melts Growth of the Vacuum Ultraviolet Double Frequency Crystal KBe2BO3F2 (KBBF) A New Structure of the 2D Photonic Crystal Microcavities with Hexagonal Lattice Chapter 11: Other Related Topics Composition and Properties of Phosphate Cement MCM-41 Anchored Manganese Salen Complex as Catalysts for Cyclohexene Oxidation TiAl Alloy Spark Plasma Sintered from Mechanically Activated Powders Research and Application of Lost Foam Technology of Goods Train Low-Carbon Alloy Steel Casting The Analysis of Toy Design Factor for Customer Loyalty in Taiwan Effect of Deformation on the Austenite to Pearlite Transformation Analysis of Microstructure of Phosphate Cement The Effect of PTFE on the Mechanical and Friction and Wear Properties of GF/PA6 Composites Catalytic Application of H4SiW12O40/SiO2 in Synthesis of Acetals and Ketals Friction and Wear Properties of Carbon Fiber Reinforced Polypropylene Composites Study on Mechanical Properties of Polyurethane Elastomers for Drum Scraper Heat Treatment of Heavy Forgings with diameter 1700mm Study on the Interaction of Fluorescent Probe 2-(2'-Chloro Phenyl)-5-(2'-Hydroxyl Phenyl)1,3,4-Oxadiazole with DNA Preparation and Properties of PVA/PAAm IPN Hydrogels-Copper Nanoparticles Nanocomposites Catalytic Activity of SWNTs/Pd Catalyst in Suzuki Reaction Force Calculation of Cycloid Gear at Three Supporting Points Of Gear Pin for Speed Reducer with Three Cycloid Gears Preparation of Nano Ti3SiC2/MoSi2 Composite by SPS Process Preparation and Application Performance Study of High Purity Montmorillonite The Influence of Factors on W/Mo Bimetal Compound Pressing Investigation on Denitrogenation Technology and Mechanism during VIM Refining Ni-Base Superalloy Research on Test about Stress Corrosion Cracking of SPV50Q Spherical Tank Thermo-Sensitive Materials for the Time-Temperature Indicator Design for a Type of Vertical Rotary and Adjustable Magnetorheological Rheometer Hydrothermal Synthesis and Characterization of Fe-Doped Na0.5Bi0.5TiO3 The Research on Aeroelasticity of the Vehicle Wing Surface Fault Diagnosis to a Rolling Bearing in a Blowing Machine Based on the Theories of EMD and Intrinsic Modal Energy Entropy Prediction of Heat Distribution Shape and Nozzle Diameter of Plasma Arc Cutter Analysis of the Influence of the Heat Input and Bead Volume on HAZ Hardness for Submerged Arc Welding Process of Mild Steel Plates 3rd Degree Mathematical Model Appropriate for Parametric Estimation of SAW Process Prediction of Temperature Distribution on Submerged Arc Welded Plates through Gaussian Heat Distribution Technique Prediction of HAZ Width of Submerged Arc Welded Plates The Parametric Modeling for Die Base in SolidWorks Research for CNC Machine Tool Servo System Fault Diagnosis Expert System Fracturing Mechanism of Marine Gas Hydrate with Vibration and Model of Experimental Device The Enrichment Regularity of Rare Earth Elements and Resource Characteristics in Polymetallic Nodules/Crusts Study on Missile Thick Wall Temperature Calculation for Aerodynamic Heat Friction/Wear Properties of Magnetron Sputtered TiB2-TiN Composite Films on Biomedical Metallic Titanium Alloy Reliability Optimization Design of Gear Box A New Coagulant for Spilled Oil Removal with Bentonite and Calcium Chlorine and Sawdust The Study of Projectile Penetration into Aluminum Armor Plate Investigation on Flexural Performance of RC Beams Flexurally Strengthened by Soffit-Bonding and Side-Bonding CFRP Sheets

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB0686466X
• ISBN:
  • 9783037851913
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058