Applications of engineering materials : selected, peer reviewed papers from the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011) July 29-31, 2011, Sanya, China

Author(s)

• International Conference on Advanced Engineering Materials and Technology
• Bu, Jinglong

Bibliographic Information

Applications of engineering materials : selected, peer reviewed papers from the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011) July 29-31, 2011, Sanya, China

edited by Jinglong Bu ... [et al.]

（Advanced materials research, v. 287-290）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

This book covers the subject areas of new functional materials, building materials, new energy materials, environmental catalysis and environment-friendly materials, earthquake-resistant structures, materials and design, biomaterials, chemical materials, thin films, hydrogen and fuel cell science, engineering and technology, textile materials, smart/intelligent materials/intelligent systems and other related topics. An invaluable guide to the topics.

Table of Contents

Preface, Committees New Functional Materials Analysis on Anti-Crack Mechanism of High Elastic Asphalt Stress Absorption Interlayer Absorbing Properties of Composite Material Plates of Multi-Layer Absorbing Structure Effect of a Filler Surface Treatment on the Properties of Conductive Silicone Rubber Filled with Ag-Coated Cu Flakes for EMI Shielding A Study on Shape Memory Performance of Cu-Al-Ni-Be Alloy Single Crystal Boride Coatings Structure and Properties, Produced by Atmospheric Electron-Beam Cladding Cytotoxicity of Single-Walled Carbon Nanotubes with Human Ocular Cells Electrochemical Inspection of the Interaction of Double Strand ds-DNA with Carmine on Nanometer TiO2 Doped Carbon Paste Electrode Effect of Temperature on Microstructure and Mechanical Properties of Spray Forming Al-8.5Fe-1.3V-1.7Si Alloys Effect of Resin on the Property of the Fluorescent Inkjet Ink A Study on the Physical Properties of AZO Films as Variation of Sputtering Conditions Grafting of 4-Vinyl Pyridine onto Polyesters Initiated by Potassium Diperiodatocuprate(III) Mixed Potential Type Sensor Using Stabilized Zirconia and La0.75Sr0.25Cr0.5Mn0.5O3 Sensing Electrode for NO2 Detection Bioactivity of TiO2/Ti Composite Membrane with Different Crystral Phase The Optimization of Combustion Chamber Components with Constrained Axisymmetric Sensitivity Analysis Algorithm Nucleation Features of the Magnetite Fe3O4 Nanoparticles with the Size of 30-40 Nm for the Hyperthermia Applications Vibration Properties of Multi-Layered Graphene Sheets Study on Production Performance Simulating the Low Permeability Dual Media Gas Reservoirs Pre and Post Fracturing An Approach to Raw Material Cost Control Model in Iron and Steel Industry Preparation of CMC-Stabilized FeS Nanoparticles and their Enhanced Performance for Cr(VI) Removal PVDF-HFP/PVC Blend Based Lithium Ion Conducting Polymer Electrolytes The Application of FEA in High-Speed Cutting Structure and Fatigue Crack Resistance of Multilayer Materials Produced by Explosive Welding Effects of IGF-I on the Proliferation of Testis Sertoli Cells in Mouse The Study on the Apoptosis of Rat's Granule Cells Induced by Ethanol Study on Reaction Process of Synthesis of Indole from Aniline and Ethylene Glycol Correcting Prediction Model of Printing's Dot Area by the Spectral Reflectance Manufacturing Technique of Temporary Dental Filling Composite Preparation and Characterization of Gelatin/Oligomeric Proanthocyanidins Composite Microspheres Effect of Foaming Agent AC on the Properties of A12O3-SiC-C Trough Castables Preparation and Characterization of Low-Methoxyl Pectin/Bletilla Striata Composite Membranes Liquid-Phase Synthesis of NiO-Loaded Ag Nanoparticles and Enhanced Photo-Degradation Performance Manufacturing of Functional Gelatin/Chitosan Composite Membrane Manufacturing Technique and Physical Properties of Environment-Protective Composite Nonwoven Fabrics Technical Application Process for Eco-Friendly Cotton by Antimicrobial Research for Use Diamond Knife to Ultra-Precision Boring Gauging Pump's Boring Synthesis and Characterization of Flower-Like Hematite Nanostructures Analysis of a Magnetorheological Transmission for Fan Clutch Study of Crack Resistance Property of Polyvinyl Alcohol Fiber Reinforced Concrete Influence of Z Value and Sintering Temperature on Properties of -Sialon Bonded Corundum Composite Effect of CeO2 Deposition Temperature on the Properties of Tl-2212 Superconducting Films Grown on MgO Substrates Effect of Quenched Speed on Microwave Properties of the NdFeB Nanocomposites Carbon Fiber Powder Reinforced Epoxy Composites used for Rapid Tooling Thermal Expansion Anisotropy of Cordierite Crystal Electronic Binding Energy Changes of Elements in Al2O3-MgAlON Composite during the Crack Healing Process Simulation and Technological Parameters Optimization of Axial Feeding Bulging Process for T-Tube Combustion Synthesis of Long Afterglow luminescent Materials Sr2-xCaxMgSi2O7:Eu2+,Dy3+ Electromagnetic Effects and Layer Thickness Influence on Natural Characteristics of Multiferroics Composite Structure Research for Repairing the Main Reducer Gears of Helicopter Based on Shot-Peening and Electro-Brush Plating Composite Technics The Crystalline Phases of Mold Fluxes Containing TiO2 The Application of the Sequential Valve Gate Control in Injection Molding Process Optimization and Application of Supported Nano-Photocatalytic Materials Simulation Research on the Four-Nozzle Flapper Valve Based on GMA Studies on Lauroyl Chloride Modified Tourmaline Powder New Water-Based Anti-Corrosion Chemical Materials in Engineering Repairing Research of Rough Structure of Superhydrophobic Film Temperature Effect on Phase Formation of Nanocrystalline Bismuth Titanate Synthesized via Hot Injection Method Development of Single Sheet Tester System for Magnetic Materials Under Tensile Stress Formation of Nano-Textured Silicon Surface Layer (or Nanowires) by Silver Ion-Assisted Etching The Synthesis of Novel Organic Light-Emitting Material 2,7-Dibromo-2',3',6',7'-Tetra(2-Methylbutyloxy)spirobifluorene Preparation of High Purity Low Hydroxyl Synthetic Fused Silica Glass Preparation of Zirconia-Aluminum Titanate Nano-Composite Powder Polymer Electrolyte of PVDF-HFP/PEMA-NH4CF3So3-TiO2 and its Application in Proton Batteries Study on the Control of Selenium Emission During Coal Gasification Influence of the Surfactant on the CdTe Nanomaterials Morphology Evaluation of Comprehensive Accuracy to the Opto-Electrical Stabilization/Tracking Device Preparation and Properties of Biocomposite Film with Gelatin and Poly(Vinyl Alcohol) Modulation of Band Gaps of Codoping GaN: A First Principles Study First-Principles Study of the Electron Transport Behavior of Short Graphene Nanoribbon Study on the Calcination of Titanium Silicalite Zeolite (TS-1) Effect of Pulse Electric Discharging on the Directional Solidification Structure of Pure Aluminum Prediction of Orthotropic Mechanical Behaviors of Hot-Pressing Weft-Knitted Flax/PP Composites Dynamic Recrystallization Behavior and Softening Kinetics in 3Mn-1.5Al TRIP Steels The Effect on Adsorption Performance of Molecularly Imprinted Polymer Using the Different Functional Monomers Preparation of Ag Nanoparticles by Particulate Radiation of Pulsed Electron Beam Microstructure and Tensile Properties of a Mg-5Sn-4Al Alloy Aqueous Synthesis of Highly Luminescent CdTe/CdS/ZnS Core-Shell-Shell Quantum Dots with Biocompatibility Mathematical Model of Dynamic Recrystallization of U75V, RE- Heavy Rails Investigation of the Curing Residual Stress in Gr/Epoxy Laminated Composites by Using Embedded Fiber Bragg Grating Sensor Infrared Light Absorption and Emissivity of Silicon Microstructured by Femtosecond Laser in SF6 A Novel Carbon Quantum Dots-Ionic Liquid Hybrid with Strong Photoluminescence Study on the Preparation of Fe2Mo3O12 and its Negative Thermal Expansion Property Electromagnetic Bandgap Structure by Low Temperature Co-Fired Ceramics Technology Preparation and Performance of Infrared Radiation Ceramic Using Blast Furnace Dust Preparation of RPSL-01 Type Photosensitive Resin for Stereolithography and Study on its some Properties Adsorption of Dye from Aqueous Solution by Zn-Al Calcined Layered Double Hydroxide Research on Morphology Control of PVA/Na-MMT Composite During Preparation Shock-Cushioning and Energy Absorption Performance Research of Aluminum Foam-Polyurethane Composite Design of an Eco-Power Automobile Body Made from Green Composite and its Structural Optimization in FEA Experimental Study of Restraining Frost Formation on Hydrophilic Surface under Natural Convection Conditions Influence of Nd2O3 on Structure and Dielectric Property of Zirconia Barium Titanate Microstructure and Performance of Nanocrystalline Nickel Parts Characterization of (ENR-50)-Ionic Liquid Based Electrolyte System Hydraulic System Simulation of Heavy Horizontal Directional Drilling Head Melting,Crystallization and Thermal Degradation of Fly Ash/Lldpe Blends Research on the Contraction Joint Width of Rubberized Concrete Pavement The Effect of Ultrasonic Field on Synthesis of Nanometer Calcium Carbonate and its Growth Mechanism Synthesis of SiC Nanowires with Silica Sol and Carbon Black Mechanical Behavior of UHPC(Ultra High Performance Concrete) According to Hybrid Use of Steel Fibers Mechanical Properties of Electron Beam Cured MMT/MWNTs/Epoxy Composites Ethylenediamine-Functionalized Carbon Nanotubes and Nylon-6 Composites Synthesis of MgAl2O4 Spinel-Corundum Composite with Waste Refractory Study of Carbon Fiber/Polycarbonate (CF/PC) Material Sandwich Structure for Vehicle Hood Research on Traffic Organization Evaluation Method Based on Simulation The Effects of Bi2O3 Doping on the Electrical Characteristics of SnO2 Based Varistors Preparation and Up-Conversion Luminescence of Yb3+ and Er3+ Co-Doped BaF2 Phosphor The Influence of Water Content on the Morphology and Magnetic Properties of Nickel Nanoparticles Prepared in Reverse Microemulsion Effect of Several Factors on Properties and Synthesis of Superabsorbent Dielectric Relaxation in (Ba0.7Ca 0.3)TiO3-Ba(Zr0.2Ti 0.8)O3 Ceramics Solving the Splitting Resilient Modulus of the Asphalt Mixture Microstructure and High Temperature Oxidation Resistance of TiC/Ti-25Al Composites Morphological and Adsorptive Characteristics of Hydrogen Sulphide on Zinc Oxide Nanoparticles Modified SBA-15 Study on Preparation of Nano-Silicon Dioxide and the Influencing Factors of Particle Size Growth Synthesis of BaCO3 Nanostructures with Different Morphologies in Water/Room-Temperature Ionic Liquids Mixed Solvents Stabilization Effect of Sodium Phosphate on Hemihydrate Calcium Sulfate Whiskers X-Ray Photoelectron Spectroscopy Study on Reduction of Graphene Oxide with Hydrazine Hydrate Static Design Based on Hierarchy Optimization Associating Materials and Structures Preparation of Composite Ground Calcium Carbonate in Ca(OH)2-H2O-CO2 System and Characterization Hydrogen Storage Property of Ti45Zr35Ni17Cu3 Quasicrystal Powder Optimization of Typical Grinding Model and the Simulation of Grinding Process Numerical Electro-Generation of Furfural Alcohol in Ni-P-MCMC/mCS Bipolar Membrane Equipped Electrolysis Cell Hydrothermal Synthesis and Characterization of Ca-Mg-Al Hydrotacite-Like Compounds Experimental Investigation on Durability of A Combined Rotor Bearing Support with Metal Rubber Material under Dynamic Loadings Conductive Ink and Applications in Printing Antenna of RFID Tag The Study of TiO2 Whiskers Prepared by Melt Phase-Splitting Method and their Photocatalytic Properties Preparation and Performance of Radiation Grafted Poly(methyl methacrylate)-Graft-Polyimide Pervaporation Membranes for Thiophene/Hydrocarbon Separation Fe3O4/ Rectorite Composite: Preparation, Characterization and Absorption Properties from Contaminant Contained in Aqueous Solution Study on Erosion-Abrasion Properties of Al-Mn Alloy and its Composite Reinforced with Al2O3 Particulates Experimental Research on the Magnetic Field Sensitive Polymeric Actuator X-Ray Characterization and Crystal Structure of SBT Doped with V2O5 Research on Properties of Ca3-x La xCo4O9 Thermoelectric Material with Adding La Study on the Methods Evaluating the Stability of a New Type of Energetic Material Generalized Regression Neural Network Cargo Flow Forecast Model in Logistics Park Based on Radial Basis Function Influence of the PH Value of Comb-Shaped Polymer on the Adsorption between the Polymer and Ca2+ Ions Applied Research on Contractive Rate Inspecting Testing Mould of Pressure Casting Alloy Progress in Research on Mo-MoSi2 Functionally Gradient Material Effect of Cd on Microstructure and Damping Capacities of Mg-Zr PM Alloy Study on Mechanism of One-Dimensional Phononic Crystals with Locally Resonant Structures Effect of the Different Structure of the Chiral Core on Phase Behaviors of Cholesteric Star-Shaped Liquid Crystals Thermal Expansion Behavior and Characteristic of SiCp/Al Composites Experiment on Thermal Conduction of Compacted Bentonite Blocks New Oil-Absorbing Material SHS and Properties of Perovskite La0.7Sr0.3MnO3 Powders by Using Dual Oxidants The Research on the Tribological Properties of C/C Composites Developing an Iron-Carbon Nitride Complex as Photocatalyst with Response to Visible Light Synthesis of Magnesium Borate (Mg2B2O5) Whisker by Flux Method Synthesis of Bis(2, 4-Dihydro-2H-3-(4-N-Maleimido) Phenyl -1, 3-Benzoxazine)Isopropane Preparation of Energy Storage Ceramsite Manufactured from East Lake Sludge Study on Finite Element Nonlinearity Calculation of Folding Rudder Experimental Study on Seismic Performance of HRB400 Reinforced Concrete Columns under Cyclic Loading Preparation, Characterization and Catalytic Properties of the Different Types of Nanometer Crystal Manganese Dioxide The Process and Property Characteristic of Electromagnetic Shielding Functional Warp Knitted Composite Fabrics Finite Element Analysis on Stability for Elastic-Jumping Membrane Building Materials Control of Electronic Properties of Organic Semiconductor Effects of Micro Fines Content on Performances of Mortar Prepared with Mill Tailings from Magnetite Preferential Sorption of Minerals on Calcium Hydroxide of Hydration Productions of Cement Corrosion Behavior of Reinforcing Steel Bar HPB235 in NaCl Solution Comparing Tests on Water Relating Stability of Polyester and Polyacrylonitrile Fiber Reinforced Asphalt Mixture Test and Analysis of Expansive Deformation for Shrinkage-Compensating Steel Fiber Reinforced Shotcrete The Effect of Anhydrite on the Hydration of CFBC Ash-Clinker-Water System Inhibition of the Expansion of CFBC Ash Experimental Research on Road Performance of Natural Asphalt Modified Asphalt Mixtures Building Materials High Temperature Creep Behavior of Zn-1.0Cu-0.2Ti Alloy Numerical Simulation on Laboratory Triaxial Test of Composite Soil with Roots The Design and Case Study of Pervious Concrete Materials Dehydration Process of Calcium Silicate Hydrate during Heating in the Air Thermal Resistance and Heat Dissipation of LED PCB with Thermal Vias Compressive Strength of High Volume Slag Cement Concrete in High Temperature Curing The Effect of CFG-Pile Caps and Cushion to Stability of Embankment Effects of AgSbO3 on the Piezoelectric/Dielectric Properties and Phase Transition of Li2O Doped NKN Lead-Free Piezoelectric Ceramics Comparision of Direct Quenching and Reheat Quenching Process on Microstructure and Mechanical Properties of a High Strength Steel Experimental Investigations on Flexural Behavior of Sandwich Composite Panels The Ac Impedance Characteristics of Soil with Different Water Content Preparation and Properties of Alkaline-Earth Silicon Oxynitride Glasses Experimental Study on the Re-Bonded Magnesia - Zirconia Refractory for New Dry Process Cement Kiln Numerical Simulation of Gas Distribution in COREX Shaft Furnace Study on Wear-Resistance of Laser Surface Remelted-Strengthening High NiCr Indefinite Chilled Iron Roll Material Fracture Failure Analysis of the 60Si2Mn Spring Steel Liner Water Model Study on Circulation Rate Influenced by Snorkel, Nozzle and Blowing Parameters in RH Refining Experimental Study of Fly Ash Concrete Attacked by Sulphuric Acid Effect of Microstructural Evolution on Mechanical Properties of 55NiCrMoV7 Steel Study on Mechanical Properties and Microstructure of High Boron Alloy Rutting Treatment Technology of Asphalt Pavement of Abrupt Slope Section in Heavy Load and High Temperature Zone A Review of Strength Models in Association with Pore Structure of Cement-Based Materials Study on Microstructure and Properties of CuZn37Mn3Al2FeSi Alloy Structure and Magnetic Properties of Sm-Fe-N Prepared by Nitriding High Purity Sm2Fe17 Grown from Sm-Rich Melt Study on the Influence of Oxygen Content on Fatigue Life of Bearing Steel Using Statistics of Extreme Values Influence of Heat Treatment on Low-Cycle Fatigue Behavior of AZ61 Magnesium Alloy Research on Fireproofing and Insulation System of Polyurethane Foam and Moulding Board with Glazed-Hollow-Bead Mortar Inhibition Mechanism of the Substance Containing Aluminum on ASR Variation of Carbonation Coefficient of Pumping Concrete with Moist-Curing Time at early Ages and Fly-Ash Content Pilot-Scale Reconstruction of Steel Slag with Electric Arc Furnace Slag and Coal Cinder Removal of Sulfur Dioxide from Sintering Flue Gas with Coking Wastewater Effect of the Combined Using of Fly Ash and Granulated Blast Furnace Slag on Properties of Cementless Alkali-Activated Mortar Research on Slaked Magnesium Slag as a Mineral Admixture for Concrete Application of Interlocking Block Pavement in Rural Highway High Performance Prestressed Polymer Mortar System in the Application of Concrete Structure Reinforcement Effect of Admixtures Treated by Magnetic Field on Concrete Study on the Preparation and Properties of CaZr0.9in0.1O3- and BaCe0.85Y0.15O3- Solid Electrolytes Experimental Study on the Mix Design and Fundamental Properties for Mixd Mortars Using Recycled Fine Aggregates The Development of High-Alumina Heat Resisting Alloy Used for Scaleboard Quantification of SBS Content in SBS Polymer Modified Asphalt by FTIR Microstructure and Property of 700MPa Ti Microalloyed High Strength Steel Produced by EAF-CSP The Influence of Aggressive Environment with a High Content of Fluoride Ions on the Alloy TiAl6V4 with a Protective Ti-Al-Si Layer Numerical Simulation of the Flow of Gases in a Large-Scale Electroslag Furnace The Influence of the Pressure on the Solidification of Zinc Alloy Study on Road Performance of Phase-Change Temperature-Adjusting Asphalt Mixture Basic Properties of Masonry Cement Mortar Affected by Content of Stone Powder Basic Properties of Masonry Polypropylene Fiber Cement Mortar Study on Flexural Strength and Flexural Modulus of Elasticity of Cement Stabilized Aggregate Mixture Proportion Design of Reactive Powder Concrete by Means of Liquid Limit Wear Characteristics of Al 6061 Reinforced with Graphite under Different Loads and Speeds Effect of Active Alumina on Sintering Behavior of Andalusite Powder Corrosion Mechanism on Oilwell Cement in Formation Water with High Content of CO2&H2S Study on Strength and Durability of Concrete Containing Recycled Coarse Aggregate Manufactured with Various Method Experimental Study on Impermeability and Frost Resistance of High Strength Concrete Used in Shaft of Coal Mine The Development and Experimental Study on High Strength and Toughness Drill Pipe Steel Research on Pavement Performance of Dense Skeleton Lime Fly-Ash Stabilized Aggregate in Gravelly Conditions Experimental Research and Finite Element Analysis of Concrete-Filled Steel Box Columns with Longitudinal Stiffeners The Research on Dense Packing Concrete Mix Proportion The Effect of Heat-Treatment on the Microstructure and Properties of PC Steel Bars Oxidation Behavior of Fe-Y Coatings Deposited by Magnetron Sputtering Microstructure and Properties and Wear Resistant of Carbide Free Bainitic Casting Steel Research On Method of Discovering Second Phase Particles with Scanning Electron Microscope Fire Performance and Thermal Insulation of Reinforced Lightweight Aggregate Concrete Study of Ageing of Copper Foils in the Outdoor Environment Effect of Heat Treatment on Microstructure and Properties of P91 Steel Industrial Production and Application in LCCs of Bauxite-Based Homogenized Grogs Test and Application on New Synchronous Grouting Materials for Earth Pressure Balance Shield Behavior of Concrete Permeability Considering ITZ Influence of Co-Polymer Dispersion Additives onto Shrinkage Strains for Cementitous Mortars and Concretes Study on Influence Factors of Co-Crystallized P2O5 in Phosphogypsum Formation and its Mechanism The Effect of Nb2O5 Addition on the Dielectric Properties of BaTiO3-Based Ceramics Optimization and Analysis for Coke Consumption Based on Clustering Investigation of Sulphate Attack on C-S-H Gel Research on the Failure Feature of AAC Load Bearig Block Wall Based on the Quasi-Static Test The Microstructure Research on Interfacial Transition Zone of Filling Material Containing FA and Coal Gangue Numerical Analysis on the Load-Carrying Capacity for the FRP Reinforced Four-Point Bending Concrete Beam Research on Hydration Mechanism of 50% Portland Cement-50% Fly Ash Systems with TA and NMR Techniques The Effect of Pretreatment and Homogenization on the Precipitation of Spherical Al3Zr Phase in Aluminium Alloy Containing Trace of Zr Mechanism of Melt Treatment Improving Thermal Stability and Glass Forming Ability of the Al-Ni-Y Amorphous Alloy Study on Toughening Cement-Based Composites with CaCO3 Whisker and Fiber Research on the Application of Recycled PE in High Modulus Asphalt Mixture Study on the Properties of Pumping Gangue Filler Development and Conceptual Design of Steel Deck Pavement Used Cement/Emulsified-Asphalt/Epoxy Resin Concrete Study on Grinding Dynamics of Phosphorous Slag Prepared by Vibration Mill Influence of Fiber Type on Concrete Flexural Toughness Evaluating Plain Concrete Flexural Toughness Using PCER Method Study on the Difference of Amorphous Substances of Coal Ashes Morphology and Structure of Aluminum Substituted C-S-H Synthesized by Reaction of Alkali Silicate and Calcium Nitrate Aqueous Solution Feasibility of Basalt Fiber Reinforced Inorganic Adhesive for Concrete Strengtening Proposal of a Simplified Prediction Formula for Compressive Strength of Fly Ash Concrete The Research Status and Prospect of the Fiber Reinforced Concrete 3D Finite Element Analysis on a 270m Rockfill Dam Based on Duncan-Chang E-B Model Energy Calculation Model of Concrete Based on Life Cycle Assessment Experimental study on the Crack Initial Stress and the Crack Damage Stress of Red Sandstone Under Different Strain Rate Conditions Analysis of Heat Conduction of Anisotropic Building Materials Strength Test and Forecast of CFRP-Confined Concrete Preloaded under Uniaxial Compressive Force Experimental Study on Alkali-Activated Slag-Lithium Slag-Fly Ash Environmental Concrete The Effect of Super-Absorbent Polymer as a Self-Curing Admixture on the Performance of Mortars Microstructure and Strength Characteristics Analysis of Shrinkage-Compensating Shotcrete Investigation of Aging Kinetics of SBS Modified Asphalt Based on Rheological Properties Influence of p/i Interface Treatment on the Flexible Thin Film Solar Cells for Application in Building Integrated Photovoltaics Applying Research on Microwave Promoting Curdle Technique of High Performance Concrete Experimental Study on CBR Swelling Characteristics of Remolded Expansive Soil Shear Strength Parameters Determination of Compacted Loess with Compression-Tension Tests Experimental Study on Compound Binding Material of Alkali Activated Metakaolin and Ground Granulated Blast Furnace Slag New Energy Materials Novel Low-Temperature Electrolyte for Li-Ion Battery The Electrochemical Characterization of Electrochemically Synthesized MnO2-Based Mixed Oxides for Supercapacitor Applications Study on Synthesis and Electrochemical Property of LiMnPO4 by Microwave Method Improving the Rate Capability of Unburned Carbon from Oil-Fired Fly Ash as an Anode Material in High-Power Lithium Ion Batteries Influence of Sintering Atmosphere on the Physical and Electrochemical of LiFePO4/C Research on the Electrical Electrochemical Properties of the LiFe0.98Mn0.02(PO4)1-0.02/3Cl0.02/C Cathode Materials Influence of Carbon Sources on the Electrochemical Performance of LiFePO4/C Composite Cathode Material Solvothermal Synthesis of Pyrite (FeS2) Properties and Synthesis of Kaolin / Potassium Polyacrylate / Acrylamide Composite Superabsorbent Resin Preparation and Biocompatibility of Nano-Hydroxyapatite/ -Sheet Silk Protein Composite Synthesis and Properties of Chemically Cross-Linked Poly(Vinyl Alcohol)/quaterized Hydroxyethylcellulose Ethoxylate (PVA/QHECE) as Novel Alkaline Anion-Exchange Membrane Theoretical Study on Crystal Structure and Hydrogen Storage Properties of Sodium Hydride Study on Solid Phase Crystallization of Silicon Films Deposited on Different Substrates Effect of the Thickness of Cr Interlayer on the High-Frequency Characteristics of FeCoTa/Cr/FeCoTa Multilayers Hydrothermal Synthesis of GdVO4:Eu 3+ Phosphors by Optimizing its Preparation Conditions Characterization of Aminoalky Cellulose Adsorbent PtRu-SiO2-TiO2/C Anode Electrocatalyst for Direct Methanol Fuel Cell The Effect of Rare Earth Modification on the Structure and Catalytic Performance of SO42-/ZrO2 Solid Acid Catalysts Synthesis of Monodiperse Carbon-Coated Lithium Iron Phosphate An Analysis of how Water-Based Ink Affects the Low Energy Surface Wettability High Transparency and Thermal Stability of Alicyclic Polyimide with Crosslinking Structure by Triallylamine Modification of Recycled Melamine-Formaldehyde Plastic on Polypropylene Wettability and Water Absorption of Irradiation Cross-Linked UHMWPE Structure and Properties of Doped ZnO Nanopowders Synthesized by Methanol Alcoholysis Method Electrochemical Construction of (0001)-ZnO/(111)-Cu2O Heterojunction Diode with Excellent Rectification Feature Carbon Nanotubes on the Performance of Al3+ Doped -Nickel Hydroxide Highly Porous Carbon Derived from Sunflower Seed Shell for Electrochemical Capacitor Several Measures to Improve the Mechanical Properties of Hand-Pushing Tapping Knife Synthesis of Cathode Materials Fe-Doped NiS2 by Mechanical Alloying for Li/NiS2 Cells Facile Fabrication and Characterization of Carbon Fiber Microelectrode Effects of Titania and Silica Nanoparticle on Paint Film Spin Precession from Hyperfine Interaction on Magnetoresistance in Nonmagnetic Organic Semiconductors Characterization of Heat Storage by Nanocomposite-Enhanced Phase Change Materials Effect of Growth Temperature on the Indium Incorporation in InGaN Epitaxial Films A New Method for Preparation and Luminescence of YBO3 :Eu3+ Phosphor Manufacture of Biodiesel by Transerification Reaction with Alkali Process from Waste Cooking Oil Effects of Ash Contents of Activated Carbon on the Performance of Electric Double Layer Capacitors Synthesis and Characterization of the Positive Electrode Material LiFePO4/C under Different Microwave Heating Time A Study on the Modification of Water Lubrication Bearing Materials Structural Stability Analyses of Composite Laminate Wind Turbine Structure and Magnetic Properties of MnAl/ -Fe Nano-Composite Powders Prepared by High-Energy Ball Milling Transesterification of Cotton-Seed Oil by Heterogeneous Solid Super Base KF/MgO Catalyst Self-Powered Device Using Aligned Carbon Nanotube Arrays in Multi-Physics Fields Synthesis and Characterization of 5-Fluorouracil and Polyethylene Glycol Esters as Prodrugs Kinetic Study of Nitrite Removal from Municipal Wastewater Using Ion Exchange Resins Characterization of the Aging Behavior of Microorganism Coagulated Natural Rubber Impact of Impurities in Metallurgical Grade Silicon on Removal Efficiency of Vacuum Evaporation Theoretical Investigation on the Structure and Optical Properties of Alq3 and its Difluorinated Derivatives Synthesis and Properties of Waterborne Polyurethane-Acrylate Hybrid Emulsion Modified by Organic Silicane Synthesis, Characterization and Properties of Polyesteramides Based on -Caprolactone and 6-Aminocaproic Acid Crystal Structure of Aromatic Polysulfones Containing Biphenylene Units Evaluation of Li-Mg-B Alloy Anode for Intermediate Temperature Lithium Batteries Study of Dislocation Generation and Growth Orientations in Upgraded Metallurgical Grade Multicrystalline Silicon Research on Lithium Ion Battery Material LiCoO2 for Hybrid Supercapacitor The Interaction between a Screw Dipole in Matrix and an Elliptical Inhomogeneity Containing a Confocal Crack Synergistic Strengthening and Toughening of PS/LDPE Blends with Nano-CaCO3 Environmental Catalysis and Environmental Friendly Materials Photocatalytic Degradation of Gaseous Acetone by a Self-Prepared Nano-Sized Composite TiO2/In2O3/SnO2 Film Photocatalyst Dehydration of Fructose to 5-Hydroxymethylfurfural Catalyzed by Alkaline Ionic Liquid Synthesis of Sn4+ Doped TiO2 Nano Powder and its Photocatalytic Activity Studies on Alkali Lignin Degradation by Phomolybdic Acid Using Ultrasonic Method Nano-Materials Coupled with Non-Thermal Plasma Application in Environmental Protection Study on A New Inorganic Binder for Fabricating Casting Mold and Core Preparation of CNTs/TiO2/CS Film and its Photocatalytic Activity Photochemical Degradation of Azo Dyes in the Presence of Hydrogen Peroxide and Hematite under Visible Light Irradiation: Surface Complex Forming and Reaction Mechanism Fixed-Bed Column Study for the Removal of Ag(I)and Cr(III) from Aqueous Solutions Using Puffed Rice Husk Solvent Extraction and Separation of Palladium(II) from Hydrochloric Acid Medium with N-Benzothiazolylazo Butyl Imide Direct Synthesis of DMC from CO2 and CH3OH over CexZr 1-x-0.1Y 0.1 O2 Catalysts Preparation and Photocatalytic Activity of Pb2+- SiO2-TiO2 Composite Catalyst Preparation of BiXY(2-X)O3 and its Photocatalytic Degradation of Molasses Fermentation Wastewater under Visible-Light Irradiation Research on Correlation of Total Bacterial and other water quality index in Water Distribution Network Adsorption Behavior and Thermodynamic Characteristics of p,p'- DDT on Expanded Graphite Preparation and Characterization of Rare Earth Solid Superacids SO42-/TiO2-SnO2-Dy2O3 Determination of the Presence of Composite Ions in Catalysts and Composite Ionic Liquids-Catalyzed Isobutane Alkylation Preparation, Characterization, and Oxidative Dehydrogenation of C3H8 with CO2 of V-Cr/SBA-15/Al2O3/FeCrAl Metal Monolithic Catalysts Characterization and Application in Pretreatment of Landfill Leachate on Modified Bentonites Influence of Resin on the Performance of Water-Based Plastic Gravure Ink The Effect of Barium Modification on the Sulfur Tolerance of Methane Catalytic Combustion over PdO/Al2O3 Catalysts Application of Pd/C Catalyst to Degradation and Utilization of Nitrobenzene in Water Synthesis of Bis-Indolylmethanes Containing 1,2,3-Triazolyl Catalyzed by Bronsted Acidic Ionic Liquid under Solvent-Free Conditions Preparation of Dialdehyde Konjac Glucomamman Preparation of Au and Au-Ce Catalysts Supported on Acid-Activated Bentontie and its Catalytic Performance Study of Benzene Hydrogenation on Ni/Bentonite Catalyst Investigation of Biocomposites Containing Glycerol-Plasticized Soy Protein and Kaolin Influence of Oxide Doping on Co3O4-CeO2 for CO Oxidation Study Defoaming Properties of Water-Based Varnish Synthesized WO3/ZrO2 Nanocomposite as the Catalyst for Preparation of Peracetic Acid Preparation of Nano-TiO2 Using a Sol-Gel Process Mediated in Reverse Microemulsion Combined with a Solvent Thermal Technique The Preparation of C, N, S Tri-Doped TiO2 and Visible-Light Photo-Degradation of Methylene Blue and Dyes Controlling Morphologies and Visible Light Photocatalytic Activity of Microstructured BiVO4 in a Microwave Hydrothermal Process Catalytic Transfer Hydrogenolysis of 2-Phenyl-2-Propanol with Pd/C and Formic Acid Vapor-Phase Elemental Mercury Adsorption by Novel Modified Vermiculite Adsorbents Impregnated with Different Agents A Novel Catalyst for the Preparation of Biodegradable Polycarbonate from Carbon Dioxide Research on the Technical Conditions on Synthesizing Calcium Zirconate Material Discussion the Influence of Nonmetal Doped TiO2 Hydrothermal Treatment and its Influence on the Structure of Phosphorous Doped Titania The Study of Photogradation of Dichlorvos Pesticide Residues in Vegetables Electrochemical Reduction of Nitrate by Fe-Si Alloy Electrode The Performance of Low-Heat Accumulation Asphalt Mixture and the Evaluation Model of its Thermal Effect on Cities Preparation of Poly(Butylene succinate)(PBS) Foaming Materials Solar Photocatalytic Degradation of MCRR by Ag-Doped TiO2 Films Photocatalytic Degradation of Bisphenol A in Wastewater Using Nanometer TiO2 Film Study on Adsorption Treatment of Phosphate Wastewater by Briquette Ash Photocatalytic Degradation of Methylene Blue Solution Using Nanometer TiO2 Film Preparation of Konjac Glucomannan/Tannin/Rice Flour Crosslinked Films Effect of Coagulation Bath Concentration on the Structure and Properties of Polyacrylonitrile as-Spun Fibers during Wet-Spinning Effect of Oxide Buffer Layers on the Optical and Electrical Properties of Ga-Doped Zinc Oxide Thin Film Synthesis and Characterization of New Kinds Sulfoxide Extractants for Palladium(II) Study on the Influence of PH Value on the Plastic Water-Based Gravure Ink Synthesis of Mn and Se-Doping TiO2 Mesoporous Materials and their Antibacterial Efficacy under Visible Light Irradiation Study on the Characterization of Fe- Ti Modified Bentonite and Its Influence on Absorption Performance of Wastewater Study on Unsupported Nano-MoS2 Catalyst for Clean Fuel Effects of BaO on Properties of Low Fluoride Content Mould Flux for High Speed Continuous Casting Earthquake Resistant Structures, Materials and Design Study on Tungsten Carbide Leaching of Cemented Carbide Tool in Sodium Carbonate Solution Effects of Different Structural Systems on Lateral Rigidity of Steel Structural Frames Experimental Study on Seismic Performance of Tall Building Structure of Concrete Filled Steel Tube (CFST) with Transfer Story Reflected Amplitude of Elastic Wave at Free Surface The Seismic Damage Characteristic and Mechanism Analysis of Building Structure in Wenchuan Earthquake In-Plane Force Effect of Reinforced Concrete Beam with Elastic Supports An Evaluation on the Width-Thickness Ratio of the Rotation Capacity of HSB800 Steel Flexural Members Pushover Testing of Circular Adobe Structure Numerical Analysis for Earth Structure Sitting on Liquefiable Soils in Roller Boundary Coincident Work between Upper Steel Structure and Lower Concrete Structure of Ningxia Flower Art Center Biomaterials Study on Medical Polyvinyl Alcohol (PVA) / Polyvinyl Pyrrolidone (PVP) Hydrogel Wound Dressing The Application of Radiation Technology in the Field of Medical Biomaterials Effect of Sintering Aid on Microstructure and Mechanical Properties of TiB2/TiN Tool Materials Influence on Surface Characteristics of Microalgae Cell by Solution Chemistry Study on Laccase Immobilization with PVA Materials Preparation, Characterization and Antibacterial Activity of Chitosan Schiffbases The Influence of Different Carbon Sources to -PGA's Molecular Weight Distribution Controlled Release of Aspirin from SiO2-PEG Hybrid Coating on 316Lss Substrate for the Preparation of Drug Eluting Stents Enhanced the Insulin Secretion of HIT-T15 Cells by Hyaluronic Acid-Coating Involves Cytosolic Free [Ca2+]i Response Investigations on Poly(Ethylene glycol) Modified P2O5-CaO-SiO2 Gel Bioglass Preparation and Properties of Fluoride-Coated Mg-Zn-Zr Alloy for Biodegradable Intravascular Stents Study on the Application of Marine Biodiesel on High Speed Diesel Engines Mechanical Properties and Rheological Behavior of Injection Moulded Foaming Bamboo Powder-Polypropylene Composites Preparation and Application of Picroside II Molecularly Imprinted Ploymer for TCM Researching Investigation on the Novel Technology of the Fine Inclusion Removal due to the Dispersed In Situ Phase Induced by the Composite Ball Explosive Reaction Preparation and Bioactivity of Mesoporous Bioactive Glasses with Different Phosphorus Contents Extraction of Polysaccharides from Cordyceps militaris by Ethanol Refluxing Method In Vitro Degradation and Biocompatibility of WE43, ZK60, and AZ91 Biodegradable Magnesium Alloys Fabrication of Sandwich-Like Hydroxyapatite-Al2O3-Si(100) Biocomposite The Use of 15N to Measure N2-Fixing Effectiveness of Rhizobium leguminosarum Strains Anti-Inflammatory Property of Biomaterial Carotenoids Production by Rhodobacter Sphaeroides WL-APD911 Study on Polyvinly-Alcohol(PVA)/ Iron Oxide Black(Fe3O4) and Polyvinly-Alcohol(PVA)/ Iron Oxide Red(Fe2O3) Magnetic Sensitive Hydrogel Synthesis of a Neotype Molecule Absorption Resin and Study on its Separation of Pigment from Fermentation Liquid Effect of Polyethylene Jacket on Swelling Behavior and Mechanical Properties of PVA Hydrogel Nucleus Pulposus Prosthesis Chemical Materials Synthesis and Characterization of Rodlike Ammonium Tetrathiomolybdate and its Thermal Decomposition Mechanism High Performance Poly (Vinyl Alcohol)-Zeolite LTA Composite Membranes for Ethanol Dehydration Pervaporation Synthesis and Spectroscopic Properties of 2-(7-Fluoro-1H-Imidazo[4,5-B]phenazin-2-Yl)-Phenol Derivatives Foundations and Advances of Cohesive Mixing Optimization Research on Synthesis Conditions of Adsorption Materials for Lithium Extraction from Seawater and Brine Study on Adsorption of Cr(VI) in Wastewater by Powdered Activated Carbon Research on Application of High Degree of Substitution Cationic Starch in Paper Coating Research on Preparation of Cationic Polyacrylate Emulsion Paper Strengthening Agent Study on Preparation of Calcium Sulfate Whisker with Leaching Tailings of Nickel Ore MEG and its Application in Drilling Fluid Synthesis of Mesoporous Zr-P-Al Materials with High BET Specific Surface Area without Calcination Interlayer Structure and Ion-Exchange Properties of Hydrotalcite Intercalated with CO32-, CrO42-, SO42- and NO3- Synthesis and Characterization of Biodegradable Segmented Liquid Crystalline Poly(Ester-Urethane)s Lanthanum Modified Catalyst for Efficient Supply of Hydrogen through Dehydrogenation of Organic Chemical Hydrides Waterborne Cationic Fluorinated Polyurethane Modified by Perfluorinated Alkyl Long Chain Thin Films The Effect of Annealing on the Electrical and Optical Properties of Cu-In-O Thin Films Effect of Substrate Temperature on Properties of CuInSe2 Thin Films Deposited by Magnetron Sputtering Investigation of Microstructure and Tribological Properties of CrxTi1-XN Composite Films on Piston Rings Growth of ZnS Films and Application in Heterojunction SSI Damping System Research Based on Discontinuity of the Motion Effect of Target Power and Bias on Adhesive Force of BCN Films Fundamental Research on the Mechanism of High-Speed Welding Undercut Study on Ultrafiltration Membrane Technology for Water Purification in Zhengzhou Influence of Anisotropy Behavior in UOE Process for X80 Micro Alloy Steel Spectroscopic Ellipsometry Study on HfO2 Thin Films Deposited at Different RF Powers Study on Crystallization Characteristic of 3PE Anti-Corrosion Coating for Steel Pipeline The Research on YAG Laser Welding Porosity of Al-Li Alloy Fatigue Properties of AF1410 Steel Welded Joint by Electron Beam Welding Identification of Dynamical Contact Parameters for Spindle-Tool Holder Interface Based on the Receptance Coupling Substructure Approach Porosity Formation Mechanisms and Controlling Technique for Laser Penetration Welding Study in Motion Control for Adsorption Type Wall-Climbing Robot with Several Legs Study on the Influence Factors of ZnFe2O4 and TiO2 Composite Films Photoelectrocatalytic Properties Effects of Negative Bias Voltage on Structure and Mechanical Properties of DLC Films Synthesized by FCVA Deposition Shape Finding Analysis of Membrane Structures Based on Real Material Property Preparation of AlN/Diamond Film Structure for High Frequency SAW Devices Study of Nanocrystalline ZnO and Zn2TiO4 Film Electrode with ZnPc Dye and PbS Quantum Dots Composite Sensitization High-Frequency Microwave Heating Technology for Automobile Windshield In Vitro Bioactivity Test of FA Added with TiO2 of Different Phases Coated on Ti-6Al-4V Substrates by Nd-YAG Laser Cladding Process Research on the Characteristics of Si-Based Reflector under the Action of Strong Laser Isothermal Physical Aging of Poly(ethyl methacrylate)/Polyhedral Oligomeric Silsequioxanes Nanocomposite Thin Films Structural and Electrical Properties of PVC-NH4CF3SO3-EC Proton Conducting Electrolyte System The Influence of Sputtering Argon Pressure on LaB6 Films Characetristics Laser-Induced Thermoelectric Voltage in La0.5Pr0.5MnO3 Thin Film Mechanical Optimization with Unknown Mathematical Model Based on Improved Adaptive Genetic Algorithm Numerical Studies on the Dynamic Performance of Polymer Foams Effect of Sputtering Parameters on the Property of TaNx/Ag/TaNx Low-Emissivity Film Study on Behavior of Ni-Based and Fe-Based Hardfacing Alloys in Plant Valves with Laser Cladding Electrodeposition of Blue Gold Thin Film onto Indium Tin Oxide Coated Glass The Manufacturing Method of Diamond Dressing Gears for the Dressing of Honing Rings Study on the Effects of Process Parameters on Weld Joint using Coaxial Inside-Beam Wire Feeding Investigation of High Emissivity Coatings Prepared by Plasma Spraying Performance Analysis on CRA-Clad Pipes Extruded from Bimetallic Centrifugal Castings The Preparation and Electromagnetic Properties of Nickel-Zinc Ferrite Thin Films Effects of Sputtering Power on the Microstructure of Mg2Si Films by Magnetron Sputtering The Diffusion and Interfacial Reaction of Cu/Si(100) Systems Influence of Substrate Temperature on the Structural, Electrical and Optical Properties of Al-Doped ZnO Films by RF Magnetron Sputtering Surface Modification Mechanism of Parylene C Film by Solution of Sodium-Naphthalene Complex Preparation and Research of Ferroelectric Properties of Fabricated Thin Film by Doping La and Nd to Bi4Ti3O12 The Dielectric and Tunable Properties of Graded Fe Doped PST Thin Films Fabricated by Sol-Gel Method Improvement of Atomic-Layer-Deposited Al2O3/GaAs Interface Quality through a Novel Sulfuration Method The Electrochemical Characteristics of Corrosion Scale on P110 Carbon Steel Simulation of Contact Behavior of the Thin Film of Hard Disk at Head/Disk Interface Hydrogen Sensing Properties of WO3/Pd Composite Films ZnO Films Deposited on Various Diamond Film Substrates with Different Surface Roughness Nanocrystallization of Fe-Based Amorphous Alloys Fe73.5Cu1Nb3Si13.5B9 by Continuous CO2 Laser Overlapping Irradiation Synthesis and Characterization of Reduced Graphene Oxide Film as Electronic Material Experimental and Numerical Study of Double Containment Joint Having Circular Cross-Section Support Study on Vibration Assisted Heat Transfer for Isonlated Fins Thermal Stability of Cu/Si (111) Films Prepared by Ionized Cluster Beam Technique The Effect of Negative Substrate Bias on the Strain Prosperities of ZnO Films Deposited by PFCVAD Ferroelectric, Dielectric and Pyroelectric Properties of Highly C-Axis -Oriented Nanostructured (Pb,Sr)(Zr,Ti)O3 Thin Films Thin Films Application of Whey Soy Proteins Waste Water in Beverages Effect of Hydrogen on Microstructure of TA15 Electron Beam Welded Joint A Comparative Study of Structural and Optical Properties of ZnO Thin Film Prepared on Sapphire Substrate by PLD and Annealed Characteristics of the Keyhole and Energy Absorption during YAG Laser Welding of Al-Li Alloy CdS Sensitized ZnO Core-Shell Nanorod Array Films Preparing by Chemical Bath Deposition Calculating the Phase Equilibria of Al Rich Al-Cu-Mg Alloys Cracking Analysis of the Upset Head of PC Steel Bars Effect of Defocus Distance on Layer Quality in Insider-Laser Coaxial Powder Feeding Laser Cladding Annealing Temperature Effect on the Microstructure and Adhesion of SiC Films Produced by MF Magnetron Sputtering Characterization of Ti-Al-N Films Deposited by Cathodic Vacuum Arc with Different N2 Partial Pressure Annealing Effects on Microstructure and Thermoelectric Properties of Bi2(Te0.95Se0.05)3 Thin Films Prepared by Flash Evaporation Method Analysis of Refrigerants Properties and Alternative A Stable Thin Film from Soluble Single-Walled Carbon Nanotubes on ITO Dielectric Tunability of Mn Doped Pb0.3Sr0.7TiO3 Multilayered Thin Films Prepared by Sol-Gel Method Determination of Thermal Parameters via a Homotopy Algorithm Auto-Control of Defocus Distance during Filling Laser Welding of Ti-Alloy with Wire Dielectric Properties of Pb0.97La0.02Zr0.95Ti0.05O3 Antiferroelectric Thin Films Prepared at Different Annealing Temperatures Comparative Studies on the Corrosion Protection Effect of Different Ions Selective Polyaniline Coatings Deposition of PANI/SSA Nano Films by MAPLE Technique and the XPS Research Hydrogen and Fuel Cell Science, Engineering & Technology Simulation on Performance Curves of PEM Fuel Cell Research on Weak Leak Detection of Boiler Tubes under Strong Background Noise Fabrication and Characterization of Solid Oxide Fuel Cell Anode with Impregnated Catalytic Ni-CeO2 Nano-Particles on 8YSZ Fibers Electrospinning Processing and Microstructural Characterization of Ce0.78Gd0.2Sr0.02O2- Fiber for a Composite Anode Preparation and Characterization of NiO/YSZ Cathode and BSCF/SDC Anode of SOEC for Hydrogen Production Simulation Researches of PEMFC Based on ANSYS / FLUENT Electrochemical Performance and Microstructural Characterization of Solid Oxide Electrolysis Cells Studies of Half-Cell for Anode Supported SOFC after Reduction Synthesis and Properties of Sulfonated Polyimide/Polybenzimidazole Cross-Linked Membranes for Fuel Cell Applications Effects of Cold-Rolled Deformation on the Electrochemical Performance of Al Anode Materials Microstructure and Electrochemical Properties of La0.75Mg0.25Ni3.5(TiNi3)0.1 Hydrogen Storage Alloys Effect of Channel Depth of PEM Fuel Cell on its Peformance A New Hydrocarbon-Type Polymer Electrolyte Membrane for DMFC Application Textile Materials Performance of Electrically Conductive Fabrics Based on Polyester/Metal Wire Wrapped Yarns Study on Influence of Crimping Performance of PET/PTT Self-Crimp Yarn Treated with Moist Heat The Effect of Blending Ratio and Yarn Twist Multiplier on Polysulfone /Meta-Aramid Blended Yarn Properties Effect of Nano-TiO2 Antibacterial Treatment on Mechanical Properties of Cotton Fabric Study on the Properties and Application of Optim (TM) Fine Fibers Study on Acid Hydrolysis of Cationic Starch Study on the Compressive Properties of Spacer Fabric Composites Based on Finite Element Software ANSYS Study of the Cooling Wall Boundary Layer with Underfloor Supply Room Research on Finishing of Oxidized Cotton Fabric with Sericin The Optimised Technological Parameters for Electrospun PMIA Nano-Scale Fibers Preparation of SiO2/PPS Fiber and Study of its Heat-Resistant Properties Preliminary Studies on Washing Durability of Fire-Retardant Viscose Fiber The Principle of the New Fiber-Delivering Device for Friction Spinning Effect of Far-Infrared Pre-Heat Treatment and Adding Methylenediphenylisocyanate(MDI) on Adhesion Bonding between Reinforcement and Rubber of Conveyer Belt Far-Infrared Emission of Filled Fabric by Sweat Adhesion between PET/Nylon Fabrics and Rubber by RFL with the Solution of Different Proportion The Approach of Electrode Materials on Electroluminescent Fabric The Study of Two-Step Dip System of Conveyer by Different Pre-Treatment Composited Silver-Contained PA 6 Electrospun Fibers with Spunbond Nonwovens for Filtration Applications The Feasibility Study of PET Fabric Dyed with Disperse Dye by Adding ZnO Powder Uniformity of Nanofiber Alignment by Electrospinning Research on Dissolve Oxygen Modeling Based on Neural Network Tearing Behavior of the Polyurethane-Coated Fabrics with Five Different Silicone Contents Effect of Acid Modification on the Properties of Potato Starch Pastes and Starch Film Research on Design Principle and Method of Trademarks with Embossment Effect Realized by Adopting the Method of High Weft Density Process Technology and Mechanical Properties of Polylactic Acid Ply Yarns and 316L Stainless Steel Braids Processing Technique and Sound Absorption Property of Three-Dimensional Recycled Polypropylene Nonwoven Composites The Evaluation of Physical Property and Manufacturing Process of Functional Warp Knitted Fabrics with Variation of Weft Manufacturing Technology of 316L Stainless Steel/Poly(Lactic acid) Composite Braids and the Induction of Hydroxyapatite Formation on the Braid Manufacturing Technique and Mechanical Properties of Environment-Protective Composite Nonwoven Fabrics Processing Technique of Fiber-Based Composite Sound Absorbent/Thermal-Insulating Board Hidrophilic Modification of Electrospun Polysulfone Fiber Mat Fast Evaluation of Pectin Content in Ramie Using NIR Techniques Anti-Bacterial and Crease-Resist Finishing of Cotton Fabrics with Chrysalis Chitosan Study on Extracting of Sappanwood Natural Dye by Cellulase Manufacturing Technology and Characteristics of Nerve Conduits Made of Poly(Lactic acid) Braids Study on Preparation and Properties of Cotton Fabric Modified by Anthraquinone Extract from Aloe Multi-Target Gray Situation Decision-Making for Clean Performance of Effective Cleaning Cloth for LCD Display Panel A Novel Method for Preparing Electroconductive Cotton Fabric The Study of Far Infrared Emissivity Influence by Rate Visible Spectrum Preparation and Characterization of Polyester Fibers/Absorbent Cotton Composite Dressing Matrix Fabrics Effect of Far-Infrared Pre-Heat Treatment and Adding Methylenediphenylisocyanate(MDI) on Adhesion Bonding between Reinforcement and Rubber of Conveyer Belt Processing Technique of Sound Absorbent/Thermal-Insulating/Flame Retardant Composite Material Smart/Intelligent Materials/Intelligent Systems Water Model Experiments on Surface Flow Velocity of Molten Steel in Slab Caster Mold Numerical Study of Effective Elastic Properties of HGB Periodically-Reinforced Composite Effect of Electromagnetic Field on the Solidification Structure of C70250 Copper Alloy Study on the Processing Technology and Mechanical Properties of Nonwoven Fabric Composited by Recycled PP Selvedges Research on Welding Deformation Simulation The Application of Shape Memory Polymer Composite in Space Deployable Truss Structure The Establishment of the System to Measure Displacement Based on Two Stage Rotary Coder Analysis on Dynamic Performance of FlatValve in Water Hydraulic Piston Pump Investigation on New Submersed Entry Nozzle in Slab Caster Structure Design for Resonant Diaphragm Liquid Density Sensor Health Monitoring of RC Frame Structure to Shake Table Excitations Velocities of Starch Particles in ER Fluids Measured with Laser Speckle Study of Microwave Reflection Behaviour in Fe3O4 Magnetorheological Fluids Detecting Centroid Projection for a Quadruped Robot with Hand-Fused Foot Based on ARM Effect of HPC on the Thermo-Sensitive and Hydrophilicity of PAN Films Application of Wavelet Analysis in the DPIV Information Processing for the River Model Test Turbine Blade Aerodynamic Optimization Based on Variable Dimensionality Model Research on Digital Modeling about Free-Form Surface with Holes Based on Coordinate Measuring Machine The Modeling and Performance Analysis of Automatic Drilling & Riveting System Based on Modular Design The Design and Characteristic Analysis of New MR Fluid Damper Simulation of Adsorption Equilibrium of Heavy Metal Cations on Soils in Circumneutral Aqueous Solution: Influences of Solution PH and Dissolved Humus Substances Hoop Stress Analysis of High Grade Heavy Wall Thickness Pipe in Hydrostatic Test Analysis of LEACH Protocol Based on Ant Algorithm Based on Risk Source Pipe Leakage Emergency Device and Sealing Method Research Study on Grout Permeation Model of an Equipment for Grouting in Roller Compacted Concrete Design of Rope Tension Measuring System of Fishing Gears Analysis of Flow Field for Stirring Tank with Complicated Cavities Based on FLUENT The Modeling Design and Research of Multi-Function Electric Fan The Assessment of Communication Problem and Effect for Product Form Experiments on Dicing Monocrystalline Silicon Wafer Using Micro Abrasive Water Jet Design of Multi-Functional Infant Handcart Development of Intelligent Drilling and Intelligent Drill Tools Effect Analysis of Different Wall Materials on Construction Project Cost Finite-Element Analysis of the Arm Lock of Ejection Seat Interlock Device A New Portable Toilet Design and Optimization A Linear Mapping Hysteresis Model Based on Theory of Microscopic Polarization Stiffness Analysis of Structures Using Shape Memory Polymer Composites Numerical Simulation and Optimization in Solidification of Zinc Alloy Summary on On-Line Balancing Techniques and Devices of Spindle Study on the Sensing Property of Carbon-Coated Filaments Effect of Magnetic Fields on the Resistance and Microstructure of Al-Cu Alloy during Solidification Processing Other Related Topics Adsorption Behavior and Corrosion Inhibition of EPP for Q235 Steel in H2SO4 Solution Analysis of the Formation Mechanism of Hollow and Cricoid Stria in Formed Coke Study on the Methods Evaluating the Burning Temperature of Gunpowder Chemical Reaction Mechanism of Sintering Flue Gas Desulphurization with Pyrolusite Slurry Investigation on the Interaction between Human-Like Collagen and Iron Analyses and Determination of Current Density and Energy Density in Electric Melting Glass Furnace Enriching Indium Using Neutralization from Solution Bearing Indium Study on Behavior of Impurity Antimony in Zinc Electrowinning Investigation of Ultraviolet Transmission Characteristics of Detecting Window in Ultraviolet Corona Inspector Comparison on Extraction Yield and Quality of Coix Seed Oil Study on Wet Picking/Wet Repellence at the Grain Direction of Offset Paper MOSFET Performance Manufactured on <100> Silicon Wafer Using CESL Strain Technology with Temperature Effect Study on Effect of Spring Materials on the Comfort of Bed Multi-Function Electrical Energy Meter Detection Method Analysis Application of Metal Powder Metallurgy Technology in Prepartion of Friction Materials of the Railway Vehicles The Detection of Cypermethrin on the Surface of Apple by IR Micro-Imaging Microstructure and Wear Properties of TiC-Al Composite Fabricated by Field Activated and Low-Pressure Assisted Combustion Synthesis Study on Application of Extrusion Concrete Side Wall in Concrete Face Rock Fill Dam Modeling for the Print-Through Prejudging Based on the Optical Density Difference Recycling and Using of Vibration Energy Na2WO4-Mn/mullite Catalysts for Oxidative Coupling of Methane Experiment Layout of Space Laser Communication System Based on Adaptive Optical System Washing Deinking of Mixed Office Wastepaper As a New Resource for Electrical Purposed Paper Flotation Deinking of Xerographic and Laser-Printed Paper: Influence of Surface-Active Substances Environmental Impact Assessment on Lifecycle of Sofa Material Research to Health Diagnose Model of Gate and Hoist Machinery Based on AHP The Factors of Pseudo Threshold Pressure Gradient Discussion on the Detection and Prevention of SQL Injection Improve the Charge Balance of White Phosphorescent Organic Light Emitting Diodes Using Co-Doped Electron Transport Layer in Emitting Layer Optimal Design on Clearance of Piston Friction Pair for Water Hydraulic Pump The Application of Siemens PLC in Traditional Chinese Medicine Production Modeling of Structural Degradation of AlCu4Mg1 for Extruded Stringer Type Specimens Exposed to EXCO Solution Environment Research on Trivalent Chromium Removal from Wastewater by Gas Quenching Steel Slag Depression Performance of Azo Dyes to Sulfide Minerals Novel CO2 Capturer Derived from SBA-15 Monolith Coated with Amine Research on Internal Stress in Electroplated Cu Films and Ni Films on Ag Substrates Research on the Effects of the Basic Properties of Offset Paper and Art Paper on Printing Dot Reproduction Promoted and Un-Promoted Co/SiO2 Fischer-Tropsch Catalysts The Metallographic Structure and Mechanical Properties of the Brazing Weld of 3003 Aluminum Alloy Position and Anti-Swing Control Based on BVP Arithmetic for Bridge Cranes Numerical Simulation of Coupled Heat and Moisture Transfer in Porous Building Material Taguchi Method for 304 Stainless Steel Nd-YAG Laser Beam Welding Multi-Dimensional Grey Construction Deformation Prediction Model Research Study on a Self-Diverting Acid System for Well Stimulation Based on Novel Visco-Elastic Surfactant Laboratory Study on Low Temperature Rapid Strength Cement Slurry 3D Dynamic Analysis of a 270m Concrete Faced Rockfill Dam

by "Nielsen BookData"

Details

• NCID: BB06864863
• ISBN:
  • 9783037851920
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 4 v.
• Size: 25 cm
• Parent Bibliography ID:
  • BA24926058