Materials processing technology : selected, peer reviewed papers from the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011) July 29-31, 2011, Sanya, China

Author(s)

• International Conference on Advanced Engineering Materials and Technology
• Li, Yungang

Bibliographic Information

Materials processing technology : selected, peer reviewed papers from the 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011) July 29-31, 2011, Sanya, China

edited by Yungang Li ... [et al.]

（Advanced materials research, v. 291-294）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

This work covers surface-engineering/coatings, modeling, analysis and simulation of manufacturing processes, materials forming, materials machining, welding and joining, mechanical behavior and fracture, materials design, computer-aided tooling testing and evaluation of materials, microwave processing of materials, laser processing technology, theory and application of friction and wear, dynamic mechanical analysis, precision manufacturing technology and measurements, waste engineering and management, CAD/CAM/CAE, product design and development, engineering optimization, measure control technologies and intelligent systems, mechanical control and information processing technology, transmission and control of fluid, quality monitoring and control of the manufacturing process, advanced manufacturing technology etc. A thorough handbook-like guide to the topics. Volume is indexed by Thomson Reuters CPCI-S (WoS).

Table of Contents

• Preface and Committes CHAPTER 1: Surface Engineering/Coatings Experimental Verification of Decentralized Approach for Modal Identification Based on Wireless Smart Sensor Network Electroless Ni-P-PTFE Composite Coatings on Titanium Alloy and Their Tribological Properties Electrochemical Behavior of Fe-Cr-Mo-C-B Amorphous Alloy Coating in HCl Solution Effect of B4C-Yb2O3 Compound Additive on Crystallization and Sintering of Fused Quartz Ceramic Materials Electrochemical Hydrogen Storage Characteristics of (Mg1-XZrX)2Ni (x = 0 - 0.3) Alloys Prepared by Mechanical Alloying Comparison in Tribological Properties of YBa2Cu3OX/Ag and Bi2Sr2CaCu2OX/Ag Self-Lubricating Composites A Study on Carbon Electro-Conductive Filler for the Epoxy Conductive Coating A Comparative Study of Zirconium-Based Coating on Cold Rolled Steel Ultrasonic Polishing of Electric Discharge Machined Surface Using Al2O3 Suspension Effect of Carbon Coating on Tensile Strength of SiC Filament by Chemical Vapor Deposition Influence of pH Value and Precipitant on Zn2SnO4 Formation via Co-Precipitation Method Effect of Corrosive Medium on the Corrosion Resistance of FeCrMoCB Amorphous Alloy Coating Adsorption Characteristics of Hg2+ Ions Using Fe3O4/Chitosan Magnetic Nanoparticles Research on Vibration Grinding Finishing Technology Preparation and Characterizations of NiTi Intermetallic Coatings Microstructure Analysis of FeS Layer as Solid Lubrication Composite Coating Produced by Low-Temperature Ion Sulfurization Research on the Mechanical Properties and Residual Stress of HVOF Sprayed Nanostructured WC-17Co Coatings AOP's Modeling Research and Model Transformation with ATL in MDA Research on Effect of Ion Nitriding Temperature on Wear Resistance of 40Cr Steel Microstructure and Wear Properties of Laser-Clad NiCrBSi Coating Microstructures and Properties of Plasma Surfaced NiCrBSi+WC/Co Layers Spraying Distance Dependence of Microhardness on HVOF WC-Co Coatings Microstructure and Abrasive Wear Properties of Plasma Sprayed Nanostructured Al2O3-TiO2-ZrO2-CeO2 Coatings Effects of Mg Addition on Thickness of Galvalume Coating: A First-Principles Study Investigation on High-Phosphorus Electroless Ni-P Plating Technology of Stainless Steel Effect of TBC Residual Stresses by Uniform Growth of TGO and Typical Interface Topography Microstructures and Strength of Hot-Rolled Mg-Zn-Y Alloys Toughing of ZrAlN Film through Superlattice Design Research on Strip Steel Surface Bright-Field and Dark-Field Images Fusion Method Research of GaAs Polishing Uniformity on Non-Abrasive Cryogenic Conditions Simulation of Inclusions Removal Influenced by Snorkel and Blowing Parameters in RH Refining Surface Characteristics and Water Absorption of Sol-Gel Coated Impregnated Paper Pressed onto Plywood Enhancement of Acid Resistance for Ultramarine Blue by Silica Coatings TiC Particle Reinforced Reactive Plasma Cladding Composite Coating by the Precursor Carbonization-Composition Process Relation between Concave Cone 3 Dimension Topography and Residual Stress in Thermal Barrier Coatings Effects of the Microstructure and Mechanical Properties for Wear Resistant Casting Surface with Vacuum Evaporable Pattern Casting Infiltration Process Effects of Substrate Bias Voltage on the Critical Failure Load of Cr-Al-N Coatings Influence of CeO2 Addition on Microstructure of Vacuum-Melting WC-Ni Base Alloy Coating Microstructure and Properties of Electrospark Deposition Coating on Die Steel Synthesis Research of Corrosion Inhibitor Similar to Polyepoxysuccinic Acid for Carbon Steel in Sea Water The Frictional Properties and Mechanism of Nano-Diamond/Ni Composite Coatings by Brush-Plating Microstructure and Wear Properties of Fe-Based Alloy Hardfacing Layers Progress of the Study on the Material and Technology of Heat Insulating Coating Effect of Additives on Photo-Aging Performance of Polyurethane Coating The Corrosion Behavior of Ni-P/SiC Composite Coating Reducing Surface Defects of CrXOY Film in Mid-Frequency Dual-Magnetron Sputtering Study on the Preparation and Property of the Ceramic Film on the LY12 Aluminium Alloy Properties of Pulse Plating Ni-SiC Nano-Composite Coating Analysis of Morphology and Growth Kinetics of Zn-Mn and Zn-0.2wt.%Al-Mn Hot-Dip Galvanizing Coatings CHAPTER 2: Modeling, Analysis and Simulation of Manufacturing Processes Motion Error Analysis of Planar Optical Waveguide Automatic Aligning and Coupling Platform Analysis of the Relationship between Void Direction and Closure Efficiency in Forging Process CFD Modeling of Flow Performance inside Subsonic Centrifugal Compressor Effect of Gas Injection Condition on Fluid Flow in a Two-Strand Tundish Research on Simulation Technology for Auto Panel in Drawing Forming Based on Autoform Three Dimensional Thermo-Mechanical Model of Different Thermocouple Embedded Modes Analysis Numerical Simulation and Test Research of Continuous Flexible Forming Process for the Spherical Parts An Improved Optimization Method on the Material Mixture Ratio of Ship Stern Bearing Research on the Heat Exchange Performance of Thermal Insulation Material and Cooling Pipe for Concrete Dam Study of Multi-Point Flexible Floating Clamping System of Multi-Roll Stretch Forming Process Research on a New Flexible Acceleration and Deceleration Algorithm with Continuous Jerk Finite Volume Simulation in Porthole Dies Extrusion of Aluminum Profiles Researches on the Ring Stiffness Condition in Cold Ring Rolling Development of Processing Maps for 3003 Al Alloy Study on Constitutive Model of 20CrMnTi Gear Steel in Cutting Process Structural Topography Optimization of Engine Block to Minimize Vibration Based on Sensitivity Analysis Study on the Forming Process Simulation of Alien Wheel Integrated Process Planning and Scheduling Based on Genetic Algorithms Simulation Study on Forming Process of the Inner Panel of Automobile Front Fender Research on Feed Processing Parameters of the Cotton Comber Distance Density Based Clustering Algorithm in Wireless Sensor Network Design of S-Shaped Submerged Inlet Safety Analysis for Rock Slope Reinforced by Piles with Computer Aided Design Method Numerical Simulation of Unidirectional Solidification on Ingot of Heavy Plate Based on MARC Finite Element Analysis of Hydro-Viscous Drive Main Transmission Shaft Using ANSYS Algorithm for Rapid Slicing Based on Coordinate of STL Model The Research about Machining Technique of the Parts with Complex Curved Surfaces by WEDM Modeling and Simulation of Five-Axis Milling Machine Based on ADAMS A Study of Springback of Sheet Metal Formed Parts Using ANSYS Numerical and Experimental Pore Network Study on Drying of Grain Materials Finite Element Simulation Analysis of Thin-Wall Parts Ultrasonic Vibration Turning Device Numerical Analysis of RPC-Filled Circular Steel Tube Columns Simulation Study on Crash Performance of Vehicle's Front Longitudinal Rails Based on Material Strain Rate NC Ultrasonic Machining Efficiency: Neural Network-Based Modeling and Simulation Original Industrial Application of two Numerical Models in Concasting Technology Finite Element Design and Numerical Simulation on Non-Pneumatic Beehive Damping Tire Effects of U-Shape Inner Cooler on Flow and Solidification of Molten Steel in Slab Continuous Casting Mold Tool Errors Compensation in Precision and Ultra-Precision Milling Based on the Least-Square Method Prediction of Quality Index of Injection-Molded Parts by Using Artificial Neural Networks 3D Numerical Simulation and Optimization of Processing Parameters in Fine Blanking of Back Plate of Brake Modelling of Surface Properties of Selected Silicate System Numerical Simulation of Rolling Process and Microstructure Evolution of AM50 Mg Alloy during Hot Rolling Process Three Dimensional Prediction of Microstructure Evolution and Mechanical Properties of Hot Strips A Novel Amorphous SiGe Material Used in CMOS Device An Advanced Strip Flatness Forecast and Simulation System for Hot Tandem Mill Optimal Tool Sequence Selection for Semi-Finishing of Mold Cavity Numerical Simulation of Three Dimensional Extrudate Swell Using Finite Element Method Study on the NOx Emission during the Combustion of Low-Quality Anthracite Coal in Supercritical Pressure W-Shaped Flame Boiler Optimaization of Single-Walled Carbon Nanotube for Adsorption of Methane Warm Forming Simulation of Dual-Phase Steel Tailor-Welded Blanks Based on Thermo-Mechanical Coupled Method A Software for Analyzing Structure of Amorphous Alloy Simulation Analysis of Splat Deposition in Plasma Spray Forming Study of Splat Particle Temperature Distribution in Plasma Spray Forming Numerical Simulation of the Inner Flow Field of Hema-Type ATY Nozzle Based on Fluent Error Coupling Analysis and Pre-Compensation in CNC Machining Based on the Empirical Formula Numerical Simulation of Welding Temperature Field on Side Beam of Train Bogie Gas Bubble Behavior Model in Adhesive Bonding Using Thermosetting Polymer Finite Element Analysis for Wall Thickness Variation of Seamless Tube in Stretch Reducing Rolling Process Simulation for Handing and Stability of Vehicle Based on SimulationX Three-Dimensional Finite Element Analysis of Polymer Coextrusion through Cylindrical Channel CHAPTER 3: Materials Forming An Experimental Investigation on Profile Forming of an End Cap Using Al 3003 (O) Experimental Study of Drawing Load Curves in Forming Conical Parts by Hydroforming and Conventional Deep Drawing Processes Measurement and Analysis on Tensile Strength and Crystallinity of Vibrating Extruded High-Density Polyethylene (HDPE) Sheet Study on Microstructure and Mechanical Properties of Mg9AlZnGdY Magnesium Alloy after T6 in Lost Foam Casting Optimization of Forming Technique during Necking Extrusion of Drill Pipe Joints Fabrication of Hierarchical Microporous Structures with Controlled Morphology and Topography Application of Numerical Simulation in Stamping Process of Complex Box-Type Parts The Analysis to the Forming Process of Welded Pipe by Non-Linear Finite Element Method The Study and Application of Metal Injection Molding of Fe-Ni-Co Alloy Investigation on the Formability of Tube in Hydroforming with Radical Crushing under Simple Loading Paths Adaptive Learning of Bending Force Presetting Model in a Six-High Cold Rolling Mill Drawing Process Analysis for Electrodeposited Nickel Coating by Finite Element Method Study of the Structural Characteristics of Mold for Precise Injection Molding Conformation and Activity of Sol-Gels Encapsulated Cross-Linked Enzyme Aggregates of Lipase from Burkholderia cepacia Model Deduction of Rolling Tension Building Process Wettability of Molten Ti on ZrO2 Structure and Properties of TC4 Alloy by Die Forming and Sintering Utilizing Hydrogenated Powder Hot Deformation Behavior of Zn-8Cu-0.3Ti Alloy and its Flow Stress Model Hot Deformation Behavior and Microstructure Evolution of GH625 Superalloy Tube during Extrusion Process Study on the Properties of Magnetization Modified Sodium Silicate Sand Effect of Phosphorus on Microstructure and Properties of Al-Mg2Si Alloys Subjected to Electromagnetic Stirring Study on the Structure Improvement of Slanted-Guide-Pillar Core-Pulling Mechanism in Die-Casting Die Wrinkling Identification and Wrinkle Distribution of a Tube in Hydroforming with Radial Crushing Study on the Rules and Effects of Wear on Die Service Life in Steel Synchronizer Gear Ring Forging Process The Effect of Anisotropy on Spring-Back of CK67 Steel Sheet in L-Dies Bending Processes Back-Stepping Design Research of Spline Die Based on Cold-Rolling Forming Numerical Simulation and Optimization of Drawing for Shallow Tapered Surface CHAPTER 4: Materials Machining Study on Influencing Factors of the Seaming of Knitted and Woven Fabrics Thermomechanical Load Study on FGM Clad Hot Forging Die under Mechanical Press Research on Thermocouple Embedded Position for CC Mould Copper Plate with High Casting Speed Defect Recovery and Control in Heavy Forgings by Two Times Upsetting and Stretching Process Study on Mathematical Model of High Speed Milling Force for Plastic Mold Steel 3Cr2Mo Experimental Study on the Cutting Temperature with Micro-Texturing Self-Lubricated Tools Fabrication of SiCp/Cu Composite by Powder Injection Molding Experimental Study on High-Speed Milling of SiCP/Al Composites Edge Drop Control Technology of 4-Hi Tandem Cold Rolling Mill on the Premise of Considering Roll Grinding Accuracy A Study on Novel Gas Atomization Device for Preparing Ultra Fine Metal Powder A New Method on Choosing Tool Materials at High Speed Machining Effects of Rotating Electromagnetic Field on Solidification Microstructure of ZA27 Alloy Research on the Machining Methods of UHMWPE Fiber Reinforced Composite Laminates Studies on Diamond Brazing Process Studies on High Efficiency Diamond Trimming Saw Bits Numerical Simulation and Experimental Study on Warm Forging Process of Half Axle Bevel Gear The Study on High-Temperature Oxidation Law of 20CrMo Steel in the Regenerative Heating Furnace The Discussion of {111} ND Formation Mechanism Austenite Phase Transformation of Thermal Analysis Temperature Field Simulation of Air Cooling Condition 40Cr ANSYS Assessment of Factors Influencing Tool Wear on the Machining of Nimonic C-263 Alloy with PVD Coated Carbide Inserts The Use and Grinding of the New Configuring Finishing Hob Study on Cutting Force of Diamond Cutter in Special-Shaped Stone Processing An Experimental Investigation of the Laser Milling Process for Polycrystalline Diamonds CHAPTER 5: Welding & Joining Studies on the Mechanical Property of Ring Nugget Formed in Sheet to Tube Joining Modeling of Resistance Spot Welding Process Using Nonlinear Regression Analysis and Neural Network Approach on Galvanized Steel Sheet The Prelimary Study of the Welds between Mg and Al by Friction Stir Welding Tensile Properties and Strain Hardening Behavior of a Friction Stir Welded AA2219 Al Alloy Technique of Laser-TIG Hybrid T-Shape Joint Welding of Titanium Alloy Experimental Study on Composites with Single-Lap Countersunk Head Bolt Joints Microstructures and Properties of FSW Joints of AZ31B Mg Alloy Determination of Optimal Recrystallization Annealing Temperature on Structural Hot Dip Galvanized Steel Sheets Chapter 5: Welding & Joining TZM Alloy TIG Welding Process and Microstructure of Welded Joints Study of Laser Cladding Novel Co-9Al-7.5W Superalloy on 304 Stainless Steel The Interlayer Designation for ZTM Ceramics and Fibre Joining Effect of Magnetic Field Frequency on Microstructure and Properties of AZ31 Magnesium Alloy Welded Joint with GTAW Effect of Ca on Grain Size and Toughness in CGHAZ of C-Mn Steel Completely Inelastic Collision to Confirm Maximum Punch Pressure Force of Cold Pressure Welding Residual Stress Characterization of A7N01-T5 Welds for High Speed Train by X-Ray Diffraction and Verification Study of Type 316L Stainless Steel TIG Welding with MoO3 Powder Evaluation Study on Angular Distortion and Residual Stress of Stainless Steel Pulsed TIG Weldment Microstructure and Mechanical Performance of Ultrasonically Brazed Joints of High Fraction Volume of SiC Particulate Reinforced Aluminum Matrix Composites Electrode Lifetime in Spot Welding Galvanized Sheet with Insert Material Effect of Physical Simulation Thermal Parameters on Microstructure Transition and Property Variation of Boron Steel The Chemical Reactions in Solution Synthesis of Aluminum Alloy Brazing Fluorate Flux The Effect of Nano-Cu Particles on Mechanical Properties of Micro-Joining Joint with Lead-Free Solder Reaserch on Measurement of Residual Stresses in Flash-Butt-Weld Rails Using X-Ray Diffraction Study on Fatigue Crack Growth Rate of Welded Joint of Duplex Stainless Steel Liquid Phase Separation of Cu-Fe Weld Metal of Manual SHS Welding Study of Silica-Titania Mixed Flux Assisted TIG Welding Process Interfacial Reaction of Alumina Ceramics to Mild Steel Braze Joint Analysis on the Residual Stresses in the Aluminum Alloy Friction Stir Welded Joints Resistance Spot Welding between Titanium and Stainless Steel with an Aluminum Alloy Insert Study on Performance of Inertia Radial Friction Welding of Copper-Alloy to 35CrMnSi Steel Crack Failure Analysis of Q235B Welding with 304 Austenitic Stainless Steel of Tube and Shell Condenser Effect of Heat Input on Toughness of Deposited Metal at -40 C of Self-Shielded Flux-Cored Wire Documentation and Analysis of Sustainable Design and Apllication of Tanggam System in Malay Traditional House Research and Development of High Energy Pulse Precision Cold-Welding Technology The Friction Interaction Mechanism of Welding Seam Identifying Based on Force Sensing Effects of Nd: YAG Laser Welding Parameters on the Microstructure of 21% Cr Ferritic Stainless Steel Study on the Joining Characteristics of Diffusion Welding Lap Joint with Various Temperatures between Aluminum Alloy and Stainless Steel CHAPTER 6: Mechanical Behavior & Fracture A Study on Tensile Mechanical Properties of Bamboo Plywood A Useful Curve Fitting Method for Concrete Uniaxial Compressive Experiment Data Fatigue Analysis of the Pipeline Robot's Swing Rod Investigation on Nonlinear Constitutive Relationship for a Honeycomb Sandwich Composite Determination of Fracture Toughness and K-R Curve for 2524-T3 Aluminum Alloy Study on Fatigue Crack Growth Model of Attachment Lug Subjected to Oblique Pin-Load Hot Deformation Behavior and Fracture of As-Extruded 7075 Aluminum Alloy Simulation of Crack Tip Plasticity Using 3D Crystal Plasticity Theory Analysis of the Generation Cause of Scale Shelling Defects on Running Surface of 60kg/m U71Mn Rail Vacuum Forming Refrigerator Inner Liner Structural Optimization Surface Crack Search and Marking on Materials with Regional Phase Unwrapping Technology Influence of Plastic Deformation on the Mechanical Properties and Microstructure of Homogenized AZ80 Magnesium Alloy Fracture Analysis of Pipe Sleeve on Extrusion Flare-Less Pipe Joints for Aircraft Hydraulic Pipe Material Factors Analysis of the Cracking in 0Cr12Mn5Ni4Mo3Al Stainless Steel Pipe Sleeve on Aircraft Flare-Less Pipe Joints Study on Casting Speed and the Speed of on-Line Mould Width Adjustment of Slab Continuous Casting A Method of Reducing Volatile Compounds in Polypropylene Packaging Materials Low Cycle Fatigue Behaviour of GX12CrMoVNbN9 -1 Cast Steel at Room Temperature Experimental Investigation of Fretting Fatigue of Train Axles under Rotating Bending Experimental Studies on J-Integral of Welded Buried High-Density Polyethylene Pipes Influence of Aging on Creep Rupture Properties of Heat Resistant Steels for Steam Turbine Rotors of Thermal Power Plants The Comparison of Fractal Dimensions of Cracks on Reinforced Concrete Beam Study on Constitutive Relationship of Fe-36Ni Invar Alloy The Experimental Study on Sensitivity of Hydrogen Embrittlement of 20Cr2Ni4A High-Strength Steel Cleaned by Ultrasonic and Deruster Study on Fracture Energy of Cement Stabilized Aggregate Study of Shear Fracture Behaviours on 6061 Aluminum Alloy Study on Crack Prevention for Concrete Rapid Construction A New Constitutive Model for Anisotropic Sheet Metal with Isotropic Ductile Damage Construction of a Finite Element Multiresolution Method Based on the Second Generation Wavelets Establish Fatigue Life Mechanism for Self Run Bushing By Engineering Analysis Methods A Model for the Effects of Strain Rate and Temperature on the Deformation Behavior of Ultrafine-Grained Metals The Development of Auxiliary Sets in Novel Cold Roll Forming Line - Continuous Mini Stretching-Bending Straighter and Roller Punching System Analysis of Axial Subcritical Crack Propagation in X80 Pipeline using Micro-Mechanical Model Variational Problem of Unloading Fractured Rock Mass Dynamic Simulation of Cycloid Wheel at Two Support Points of Needle Gear pin for New Three-Gear Pin-Cycloid Driven Speed Reducer CHAPTER 7: Material Design of Computer Aided Effect of Chlorine on Combustion Process of Pulverized Coal in Tuyere Zone Study on CH4 Adsorption onto the Surfaces of Perovskite ABO3 ( A=La, Ba
• B=Zr, Co, Ce) by Density Functional Theory Analysis in Atmospheric Corrosion Behavior of Bainite Steel Exposed in Offshore Platform Based on the Artificial Neural Network Temperature Field Simulation of Flame Deformation Correction for Thin Plate Study on Injecting Forming Technology of Railway Locomotive Bearing Retainer Dynamic Compressive Behavior of Granite under Active Confinement Design and Fabrication of Blood Drawing Device Surface Modeling Design and Temperature Field Analysis about Air Intake Cover Based on Pro/E Software CHAPTER 8: Tooling Testing and Evaluation of Materials Electro-Conductive Property of Polymeric Composite under Impact Loading Using a Modified SHPB Duplex Stainless Steel Microstructure Display and Microscopic Study Study on Flux-Pinned Interaction between High-Temperature Superconductor and Permanent Magnet and Flux-Pinning's Self-Stability Mechanical Test on Pipe Collapse under External Pressure Biomaterial Impedance Analyzer Based on Digital Auto Balancing Bridge Evaluation Method for Fabric Non-Iron Pleat Plasticity Determination of Exciting Power and Saturation Characteristics for Dual Laminated Core Models The Equipment on High Sensitive Test of Infrared Directional Emissivity of Materials Design and Experiment of Electromagnetically Induced Acoustic Emission for Metal Crack Detection Research on the Sorption of Anticorrosion and Antiwear Addtives on Surface of Axletree Determination Methods of the Minimum Safety Thickness of Acrylate Waterproof Membrane An Experimental Setup to Test Thermal Contact Conductance Across Solid/Solid Interface Realization and Analysis of Bending Fatigue Strength Test for Gears under Random Loading Damage Evaluation of 16Mn Steel in Tensile Test Infrared Thermography Non-Destructive Testing of Composite Materials CHAPTER 9: Microwave Processing of Materials Microwave Joining 95-Al2O3 Ceramics Used Al-Si Alloy as Interlayer Experiment Study on the High-Phosphorus Hematite Carbothermal Reduction in Microwave Field Influence of Hoop Coefficient on Dynamic Response of Railway Bridge Protective Frame under Impact Load Experiment Research on Combustion of Microwave Modified PC Microwave Assisted Solid State Reaction Synthesis of Complex Amino Acid Complexes of Mn ( ) Microwave-Irradiated Preparation of Super Absorbent Resin by Graft Copolymerization of Starch and Acrylic Acid Effect of Ultrasonic Wave on Lentinan Extraction Viscoelastic Characterization of Microwave Drying Nature Rubber Hybrid Control for Isolation and Energy Dissipation Systems of Flexible Pile Mechanism Study on the High-Phosphorus Hematite Carbothermal Reduction in Microwave Field CHAPTER 10: Laser Processing Technology Effect of Laser Surface Melting on Structure and Properties of a High Speed Tool Steel Microstructure Research of Magnesium with Laser Surface Cladding by Al-Si Alloy Direct Writing Micro/Nano Structures on PZT Wafer by Laser Micromaching Research on the Application of DVD Pick-Up Head in Three-Dimensional Optical Storage Development of Numerical Model and Coupled Thermal/Mechanical Analysis in the Laser Transmission Joining of PET and Stainless Steel Influence of Re-Melting Technology on Properties and Microstructures of Ferrous Matrix Composites Reinforced with Tungsten Carbide Particle Patterning of ITO on Glass with Two-Step Using Excimer Laser and Wet Chemical Re-Etching Development of Porous Scaffolds Using Selective Laser Sintering of Polylactic Acid/ Hydroxyapatite for Bone Tissur Engineering Study on Thermal Fatigue Resistance of Non-Smooth Cast Iron Treated by Laser Surface Alloying of CrNi Powders Characteristic of Laser Texturing Surface Aided with Abbott Curve Laser Repair Cladding of K418 Ni-Base Superalloy by CoCrNiW Powder Study on Anti-Corrosion of the HAZ of 30CrMnSi Treated by Laser Remelting Surface Layer Properties of Sintered Ferritic Stainless Steel Remelted and Alloyed with FeNi and Ni by HPDL Laser Laser Cladding of Al+nano-Al2O3 Powder on ZM5 Magnesium Alloy Optimization of Laser Transmission Joining Process between Different Thermoplastics using Response Surface Methodology Transverse Superplastic Deformation of Laser Welded Ti-6Al-4V Sheet CHAPTER 11: Theory and Application of Friction and Wear Influence of Silica Fume/Nanosilica on the Strength and Microstructure of Phosphoaluminate Cement Tribological Testing Method between Knitted Fabric and Skin in Wet States Experimental Study on the Tribological Properties of Water-Lubricated Rubber Bearings Tribological Behaviors of Nanocrystalline Nickel Coatings under Lubricated Conditions A New Method of Numerical Differential and Time Domain Integral Based on the Analysis of Vibration Response Cyclic Spectrum Analysis on Rolling-Element Bearing with Inner-Race Point Defect The Effect of Rail Material on Wear Behavior of Wheel and Rail Inhibition Behaviour of a Mixed Additive upon Zinc Electrowinning from Sulphate Solutions Containing Germanium Computer Analysis of Radar Graph Fractal Method for Wear Debris Contour Investigation of Grease Lubrication Effects on the Fretting Wear Behavior of Ball Bearings A Study of (N-octylic acid)-N-Quinazolin-4-One Methylester as an Oil Additive A Two-Disk Test Rig for Researching the Damage Behavior of Rolling/Sliding Contact Surfaces under Extreme Conditions A Shakedown Limit under Hertz Contact Pressure Key Problems in Study on Fretting Fatigue of Aluminum Alloy Research on Static Characteristics of Deep/Shallow Pockets Hybrid Bearing under Laminar and Turbulent Mixed Regimes Influence of DC Steady Magnetic Field on Friction and Wear Characteristics of Friction Pair of High-Speed Steel / 2Cr13 Stainless Steel Tribological Performances of FeS Solid Lubrication Duplex Layer under Liquid Paraffin Oil with n-Al2O3 Lubrication CHAPTER 12: Dynamic Mechanical Analysis, Optimization and Control Analytical Model of a Simple Supported Beam with Variable Section Subjected by a Moving Load Study on a New Series of DNA Dodecahedral Links Flapping Mechanism Design and Aerodynamic Analysis for the Flapping Wing Micro Air Vehicle House Renovations and Extensions in Malaysia: An Investigation of Mechanical Changes and Modification of House in Klang Valey, Malaysia The Modal Analysis of Roller Chain Drives Decentralized Semi-Global Stabilization of Large-Scale Nonlinear Systems with Mixed-Order Nonlinearities Analysis of Stress Response for the Super High Rise Double-Tower Connected Structure with the Trusses of Changing Rigidity Analysis on High-Speed Sampling Device with Big Interior Force Simulation and Fuzzy Control Strategy Analysis on 4WD Hybrid Electric Off-Road Vehicle Review and Prospect on Dynamic FE Model Updating Methods of Footbridge Structures Based on Ambient Excitation Non-Linear Finite Element Analysis of Contact-Impact between Drill String and Wellbore under Air Drilling Dynamic Stiffness Identification of Bolted Joints Research on Topology Optimization Method for Continuum Structure under Geometric Constraints The Analysis of Radial Magnetic Bearing's Magnetic Field in Active Magnetic Bearing Electric Spindle Unit Haptic Control for Minimally Invasive Robotic Surgery The Method of Parametric Design of Mixing Blades Based on Subdividing Functions Optimization of Concrete Open-Loop Pumping Displacement Control Parameters under Variable Loads The Finite Element Model (FEM) Updating of Mirror Frame System Based on Response Surface Method Nonlinear Primary Vibration of Circular Sandwich Plates and Modal Analysis Influences of Semi-Rigidity of End-Plate Joints on Structures Analysis of the Mixed Control System of Damper and TMD Stress Spectrum Analysis on Steel Structure of Gantry Crane Dynamic Optimization Design of Stochastic Finite Element Variability of WPT-Based Dynamic Identification of a Suspension Bridge under Changing Temperature, Wind and Traffic Conditions CHAPTER 13: Thermal Engineering Theory and Applications Experimental Study on Ammonia-Water Bubble Absorption in External Magnetic Field Analysis of the Heat Transfer Coefficients on the Top of a Marine Diesel Piston Using the Inverse Heat Conduction Method Research on the Local Upwind DQ-Lagrange Method for Solving the Flow Field in Labyrinth Seal Influences of New Electrical Material on Transient Heat Transfer in IMCCR Reviews of Studying on Thermal Management System in EV/HEV Battery Pack The Analysis on Circulating Fluidized Bed Boiler Heat Tube Failure Design of Vacuum System of Steam Jet Bursting Unit for Chestnut Shell Study on the Porous Media Used in Numerical Simulation of Temperature Characteristic for Isothermal Chambers Optimization of the Cooling Channels in a Journal Bearing Based on Thermohydrodynamic Analysis Integrated Optimal Design of Ducted Propeller Based on DOE SABER-Based Simulation for Compact Dynamic Electro-Thermal Modeling Analysis of Power Electronic Devices Compositional Design of Ceramic Extrusion Die Materials Based on the Residual Stress Analyses in the Die Manufacturing Process Numerical Simulation of Body Heat Transfer Coefficient Test of a Railway Vehicle CHAPTER 14: Precision Manufacturing Technology and Measurements Experimental Research on Ultrasonic Vibration Milling Metal Matrix Composites SiCp/Al Study on Dynamic Minimum Thickness of Cut by Nanoscratch Testing Detection Status of Surface Defect for Precise Optical Element Chapter 14: Precision Manufacturing Technology and Measurements Research on Progress of Micro Processing Technology Marine Authigenic Deposits Mineral - New Fields for the Development of Rare Earth Resources A Method of Double-Side Displacment-Rotation Flat-Lapping with Solid Abrasives Ultra-Precision Shaping and Polishing Experiments in Nanoparticle Colloid Jet Machining A Study on Surface Quality of GaN with CMP Polishing Process Experimental Investigation on the Influence of Tool System Imbalance on its Vibration Characteristics The Computational Analysis of Hanging-Weight Method Used in High Speed Rail CHAPTER 15: Waste Engineering and Management A System Dynamics Model for Water Quality Management - Waste Load Allocation A Watershed's Environmental-Economic Optimization and Management Framework Based on Environmental Carrying Capacity Physico-Chemical Characters of Pyrolysis Oil Obtained from Sewage Sludge The Effect of MgO-Al2O3 Spinel on Refractory Bricks Made from Al2O3-Cr2O3 Slag Preparation of the Al2O3-ZrO2-C Sliding Nozzle Using Recovery Refractory and Improvement of its Performance Removal of Phosphate from Aqueous Solution by Using Red Mud Production of Si-Al-Fe Alloy with Carbothermal Reduction of Coal Fly Ash Research of the Excellent Engineers' Quality Training Uncertainty Analysis of Thermal Protection by Microencapsulated Phase Change Micro/Nanoparticles during Hyperthermia Influence of Operation Procedures on Vicat Softening Temperature of Thermoplastic Materials The Influence of Hadifield Steel-Bonded TiC Preparation Process on Microstructure and Properties Simplified Analysis Research on Ancient Chinese Timber Structure Various Cooling Methods to Prepare Single Polytetrafluoroethylene Composites Study on the Control Technology of Piezoelectric Transducer Assembly Exploration on Methods of Making PAFC Using Coal Gangue Study of Modification of High Temperature Melting Compound Steel Slag-Fly Ash Optimization of Underwater Body's Shape Performance Analysis of Coupled System of CO2 Transcritical Heat Pump and Rankine Cycle Study on Papermaking Processes Wastewater Treatment Using of Different Type Cement in Solidification/Stabilization of MSWI Fly Ash Influence of Zeolite NaA on Thermogravimetric Behavior of Sodium Alginate for the Purpose of Processing Plastic Wastes Study on Parameter Optimize of High-Speed Mobile and Matlab Simulate Mechanical Method for Recycling Original State Aggregate from Demolished Concrete Sulfonated Chemi-Mechanical Pulp of Cotton Stalk and Bleaching The Influence of Cutting Conditions on Friction and Wear Properties of PEEK, CF/PEEK and GF/PEEK Composites Using PCD Tools CHAPTER 16: Mechanical Dynamics and Its Applications Study on Dynamics of Electrochemical Degradation for Chitosan Tool Wear Measurement of Ball-End Cutter Based on Shape Mapping Optimal Design for Partial Inertia Force Cancellation in Ultra High Speed Pressing Machine Hull Design and Structural Analysis of an Underwater Robotic Vehicle Subdivision of Machining Stable Region Based on Vibration Frequencies Optimization of Underwater Cavity's Shape Test Method for Rheological Behaviors of Magnetorheological Grease Based on Coaxial Cylinder Shear Mode and Rheometer CHAPTER 17: Vibration, Noise Analysis and Control The Optimization of a Middle-Sized Passenger Car Steering Wheel Vibration at Idle Speed Nonlinear Dynamic Behaviors of an Imbalance Rotor Supported on Fixed-Tilting Pad Journal Bearings Finite Element Analysis on Axial-Torsional Coupled Vibration of Drill String Application of Ant Colony Algorithm in Fault Diagnosis of Roller Bearing Acoustic Radiation Simulation of Marine Sliding-Thrust Bearing Shell Based on SYSNOISE Experimental Identification for Seals Rotordynamic Coefficients Based on Double Plane Balance Method Study on Dynamic Characteristics and Dynamic Response of Woodworking Four-Side Planer Performance Testing for Bamboo Charcoal Knitting Fabrics of Different Structures Effects of High Density Ultrasonic Field Coupling on the Microstructures and Properties of Al-Si Alloy Identification of Acoustic Emission Signals Based on Multi-Resolution Correlation Filtering Design and Test of Silent Chain Including Silicon Fluorine Rubber Link Plate Fault Diagnosis based on Wavelet Analysis for Bearings under Low Rotating Speed The Trial Research on Suppressing the Chatter by Variable Speed Milling The Green's Function and its Oscillatory Properties for a Single Branch Structure of a Pinned Beam-Rod System Piezoelectric Equation and Two Types of Piezoelectric Sensors Model Factorial Hidden Markov Model Recognition Method Based on Multi-Channel Information Fusion Experimental Research of Characteristics of Fluid-Induced Force in Eccentric Seal The Research of Civil Structural Damage Identification Based on Lifting Wavelet Entropy Index Modal Analysis of the Iced Transmission Line Based on Three-Dimensional Curved Beam Element A Numerical Analysis of Infilling-Wall Multi-Functional Vibration Reduction The Testing and Improving of Acoustic Performance on Muffler Displacement Governing Equations of Moderately Thick Cylindrical Shallow Shells by Transverse Shearing Deformation and the General Solution Displacement Fundamental Equations and Analysis of Governing Equations of the Circular Moderately Thick Shallow Spherical Shells Vibration and Noise Monitoring of Ceramic Motorized Spindles The Denoising Method for Transient Speed Signal of Diesel Engine Test Verification of a Design Method for a Fluid Viscous Damper A Study of the Screening Efficiency of a Probability Sieve Based on Higher-Order Spectrum Analysis and Support Vector Machines Vibration Cosine Solutions of Free Orthotropic Rectangular Plates on the Elastic Half-Space Study on Trispectrum Slices for the Magnetorheological Damper A Study on Relevance between Distortion of Distributed Mode Loudspeaker and Characteristic of Sound Panel Modal Analysis of Water-Lubricated Rubber Stern Bearing Based on ANSYS Hybrid Multi-Mode Input Shaping Suppresses the Vibration of a 3-DOF Parallel Manipulator Combination of Wave Atoms Shrinkage with Bilateral Filtering for Oscillatory Textural Image Denoising Numerical and Experimental Studies on Aerodynamic Characteristics of Pneumatic Exhaust with Perforated Panel Muffler CHAPTER 18: Mechanical Reliability Theory and Engineering An Analytical Solution for Stress and Displacement in Casing-Cement Combined Cylinder under Non-Uniform Loading The Effect of Anisotropy of Medium on the Stress State around a Borehole Study on Reliability and Safety of Automatic Speed Control System Based on Dual Redundant Model Based the GM Reliability on the Application of Mechanical Product Evaluation Reliability of Cermet Cladding Parts Based on the Failure Tree Series The Study of Fuzzy Reliability of Concrete Durability after Corrosion of Steel-Bars Reliability Assessment of a Certain Diesel Engine with Multi-Parameter Degradation Based on SVDD Research on Multi-Excitation Source United Controlling Test Method Based on Distributed Actuation Stress Conditions for Surface Analysis of Butyl Rubber Lining An Approach to Fatigue Reliability Analysis Based on the Hybrid Model of Probability and Non-Probability Local Monte Carlo Simulation for the Reliability Sensitivity Analysis Important Sampling for Structural Reliability Based on Radial Basis Function Neural Network Study of Sequential Sampling Method for Weibull Distribution Analysis of Latest Application Movement of Laser Surface Heat Treatment Technologies Experimental Study on the Durability of Square-Section Columns Externally Wrapped with Carbon Fiber Reinforced Polymer Maximum-Likelihood Estimation of the Parameters with Constraints in Step-Stress Accelerated Life Tests Design Improvement through Reliability Analysis of Belt-Type CVT Systems for Scooters Dynamic Reliability Analysis of Drill String System in Deep & Ultra-Deep Well Based on the First Excursion Failure Criterion CHAPTER 19: CAD/CAM/CAE Research on the Method of Class_A Surface Reconstruction in Automotive Body External Panel Design Web-Aided Design for Dimensioning Power Cables Simulation and Analysis of Frame Structure of Military Transport Truck A Research of Parting Design Frame of Telecontrolled Boat Hull by UG on Case-Based Reasoning Integration of Moving Least Squares Method and Multilevel B-Spline Method for Scattered Data Approximation Automatic Generation of the CAE Parametric Model from the CATIA Model for an Aircraft Hydraulic Tube Structure Parametric Design of Roller Oscillating Follower Disc Cam on UG The Geometric Modeling of Pieces in Virtual Milling Simulation Study on Mechanism of Hammer Bit and Rock Interaction in Geophysical Prospecting Percussion Drilling Optimization of Cooling System of Linac Collinear Load Simulation of Dynamic Carry-Loading Characteristics for Vehicle Body of High-Speed Train Study on Hydraulic Circuit Simulation Based on MSC*EASY5 for the Arm of Excavator Function Design of PDM System for Small-Medium Scale Pressure Vessel Manufacturing Enterprises Research Status and Countermeasure of Temperature Rise of Hydraulic Dynamic and Static Bearing Study of FPBS Model for Conceptual Design of Mechanical Product Finite Element Analysis on Thermal Characteristic of the Headstock of NC Machine Tool Structure Optimization Design of Drum of High-Speed Tire Test-Bed Powder Mixed EDM Stirrer Designing and Simulation An Automotive Die Face Compensation Method Considering Blank Thinning and Die Deformation Study on Fengdu Second Yangtze River Bridge the Cable Anchorage Structure in a Girder Transfer Mechanism Random Vibration Analysis of the Deployable Structure for Satellite Antenna Boundary Conditions for Numerical Simulation of Diesel Water Jacket Application of Computer and Network Technology in Welding Power Source Design A New Approach to Integrating Algorithm Modules in CAD Software Applications Modeling of Heat Transfer in Spent-Nuclear-Fuel Container during Forced-Chilling Process Different Finite Element Software on Electric Field Analysis of Magnesium Electrolysis Cell Retrieval Algorithm of Images and its Applications in Recognition of Metallographic Pictures Research on Vehicle Ride Comfort Based on Virtual Prototyping Technology Application of Computer Simulation Technology in the Analysis for Gilling Machine Structure Mining Mobile Telecommunication Services Using Apriori Algorithm Coal Face "Three-Machine" Selection and Matching Knowledge Modeling Based on Ontology The MultiAgent Forming Stress Analysis and Design of Cold Bending Centre Sill Research on Calculation and Smoothing of Grinding Wheel Profile for Machining Screw Rotor Design and Implementation of Virtual Royal Garden in Northern Song Dynasty with Stereoscopic Display Research on Ship Parts Nesting with Immune Ant Colony Algorithm CHAPTER 20: Product Design and Development Finite Element Analysis and Structural Improvement of S195 Diesel Engine Connecting Rod The Numerical Simulation and Optimal Design of Nozzle Jet for Gas-Fluid Two Phase Flow Design and Implementation of an ATmega8L Microcontroller Based Adjustable Closed Loop Speed Controller of a DC Motor Finite Element Analysis and Structural Improvement of Farm Engine Connecting Rod Design and Simulation of the Torsion-Free-Body between the Vehicle Oil Can and the Chassis 3D Design on Eddy Current Retarder FEM Analyses on Stress and Deformation of a C-Type Expansion Bolt The Optimum Design of Mechanism Scheme Based on the Functional Analysis Development Design of New Age Children's Toy Dynamic Characteristics Analysis of High Water-Based Large Flow Safety Valve Digital Design of Children's Battery Car Research on Component Attributes in Domain Problem Solving Symmetric Beauty: Press Based on Reconfigurable Toggle Mechanism Driven by Pneumatic Muscle Optimization of Parameters for Children's T-Shirt Neckline Effect of Bacteriostats on Cells Growth and Contamination-Resistant Capability of Rhizobium Inoculants The Structure Design and Analysis of Predigest Laser Combine Bind and Extend Bind Flat Roof The Fast Measuring and Processing Method of 3D Measuring System in Reverse Designing Research on Collaborative Design System of Mobile Crane Innovative Design for Supply Mode of Steam in Drying Cylinder Human Dimension and its Application in Product Design Study on the Information Coding Design Humanity of Man-Machine Display Interface The Design of Moving Mongolia Yurt Discussion on the Transportation Speed of the Horizontally Vibrating Conveyor Study on Layered Fracturing String for Deep Compact Gas Reservoirs Application and Design of Plunger Pump Lifting Viscoelastic Fluid Conceptual Design Methodology of Mechatronic Systems Popular Evolution and Styles Reusability of Platform Shoes CHAPTER 21: Engineering Optimization Optimization of Extraction Conditions of Active Constituents from Siraitia Grosvenorii Dynamic Analysis on Steel Tower of Vertical Axis Wind Turbine The Optimization of Flexible Job Shop Scheduling Problem Based on Improved Dual Coding Non-Dominated Sorting Genetic Algorithm Hydrodynamic Analysis of Oil Storage Vessels for National Strategic Petroleum Reserve The Reflector Bracket Mirror Structure Optimization and Design of the IR Warring System The Project Research for Optimal Scheduling Based on Particle Swarm Optimization View Angle Characters of the Chiral HAN-Mode LCD APDL-Based Optimization of the Boom of Luffing Jib Tower Cranes An Effective Resolution Algorithm for the Two Dimensional Bin Packing Problem Structural Optimization on the Hydraulic Press by FEM and Mathematical Programming Algorithm The Extractive Technique of Active Constituent in Six Insecticidal Plants Analysis of Flameproof Diesel Performance Optimization of Earth Observation Satellite System Based on Design of Experiment and Surrogate Model Topological Optimization Design for Pedestal of Horizontal Rocket Rivet Fixture Numerical Simulation of Internal Flow in Stamping and Welding Multistage Centrifugal Pump CHAPTER 22: Measure Control Technologies and Intelligent Systems The Lag Comparator of the Two-State Modulation Technology to the Development of a New Type of Dynamic Electronic Load Harmonic Detection Based on Improved Adaptive Method and its Performance 2-D Circle Measurement System for Small Rule Parts Based on Machine Vision Design of a Fuzzy Control System for Integrative Irrigation in Field Design of Multi-Channel Data Acquisition System Based-On DSP Measuring Method for Differential Sensing Gratings Modulated with Matching Grating Digital Control Hydraulic Variable Pump Based on Mechatronic-Hydraulic-Air Integration Driven by Compressed Air Predictive Controller Design and Simulation of Time-Varying System Based on IGPC Algorithm Considering Signal Correlation for Denoising of the Magnetic Flux Leakage of Wire Rope Design and Implementation of SPI Communication Based-On FPGA Research and Application on Controllable Starting Circumstance of Trough and Flexible Rubber Transfer Computation and Analysis of Disk-Type Magneto-Rheological Fluids Brake Digital Signal Processing for Open-Loop Fiber-Optic Gyroscope New Locating Method of Spatial Target with 3-R Range-Only Virtual Reality Based Auxiliary Robot System for Liver The Fluorescence In Situ Hybridization Approach Applied in the Study of the Denitrifying Bacteria on Nitration Tank of the Metal Membrane Bioreactor Energy Efficient Rout Algorithm Based on Ant A Simple Calibration Method for the Relationship of the Eye-in-Hand of Robot Vision The Analysis and Improvement of S-MAC Protocol for Wireless Sensor Networks Research on Algorithm of Detection of Weld Image Edge Based on Lines Positioning Theory Computerized Simulation on Energy Saving Characteristics of Variable Displacement of Double Action Vane Pump The High-Precision Relative Rotational Speed Measurement System Based on Magnetic Signal and Spectrum Correction Study on PIDNN-Based Flow Control in Layered Water Injection Technology in Oilfield A Design of Sheet Metal Handing Manipulator Based on PLC A Novel Dimension Measurement System of Hot Large Open Die Forgings Research and Development of Embedded CNC System for Drilling Based on ARM The Research on Snake-Like Robot Design Based on Single Chip Microprocessor Multi-Class SVMs Based on Priority for Computer-Aided Diagnosis of Lung Nodules in CT Images Study on the Soil Slope Stability Based on the Support Vector Machine Fluorescence Spectroscopy as a Potential Monitoring Tool for Recycled Water Systems Robust Control of Variable Pitch Wind Turbines Base on Linear Matrix Inequality CHAPTER 23: Mechanical Control and Information Processing Technology Study on Control Strategy of Train Automatic Speed Control System Design of Open Motion Control System in Fully Electrical Plastic Injection Molding Machine A Maximum Power Point Tracking Algorithm Based on Fuzzy Neural Networks for Grid-Connected Photovoltaic System Based on Synchronized Timed Petri Nets for Emergency Vehicle Preemption Systems A Novel Transformer Fault Diagnosis Method Based on Gross Error Examination Research Progress of Wavelet Analysis in Flow Structure Characterization An Improved H.264 Codec Algorithm Based on Regions of Interest Research on a Method and Mechanism of Ocean Current Sensor Calibration A Collision Avoidance System for Dam Concrete Construction Based on GPS and GIS Study of Gas Injection System for EBIT Facilities Experiment Research on Control Method and Mathematic Models during Energy Storage to the Double Function Flywheel System The Study of the Dynamic Testing System of Modern Measurement and Monitoring Platform Design of Live Video Monitoring System Based on DM642 A Fault-Tree Based Intelligent Fault Diagnostic System of Heavy CNC Equipments Research of Servo System for WEDM Based on DSP Development of Energy Saving Control System for Street Lamps Based on SCM Rotation Shaft Twist Angle Measurement Based on Moire Fringe and Error Analysis Design of Plasma Cutting Tracking Device for Spiral SAW Pipe Design and Implementation of Automatic Drainage in Coal Mine CHAPTER 24: Transmission and Control of Fluid Numerical Simulation of Combusting Flow Field in Ram-Compressed Rotor Chamber Ratio Control Strategy for an Electromechanical Continuously Variable Transmission Based on Engine Models Numerical Simulation and Experimental Research on a Splash-Proof Water Injector Research on Indirect Stator-Quantities Sliding Model Control for Induction Motor Design and Research of PMSM Control System Based on FPGA CHAPTER 25: Quality Monitoring and Control of the Manufacturing Process Analyses of Influencing Factors of Pore Formation during Resistance Spot Welding of Magnesium Alloy Modeling Variation Propagation Based on State Space and its Application to Dimensional Variation Prediction in Shipbuilding Key Technology of Automatic Ultrasonic Testing System for Corkscrewed Steel Pipes The Design of Control System of Rapid Prototyping Machine for Ceramic Parts Based on SIEMENS S7-200 Centering Performance Analysis of Static Balancing Measure for Marine Propeller A Non-Destructive and Effective Metrology to Automatically Monitor Kink Effect of MOSFETs Evaluation of 18 Year-Service Lifetime of NR-SBR Lining A Kinetic Model for Cassava Starch Hydrolysis under Cold Enzyme Two-Stage Hydrolysis Condition Uniformity Assessment of Digital Prints based on NPS and CSF CHAPTER 26: Automation Technology of Production Process The Recognition of Target and Attitude of Bucket for Excavator Robot Based on Color Mark Tracking The Improvement of PID Control Based on Programming Transition Process Decentralized IMC-PID Controler Design for Multivariable System Electro-Hydraulic Servo Central Position Control System of Strip Based on the Principle of Differential Capacitance J-Automatic Welding Robot Software Design PID Parameters Adjustment Based on PMAC Control Card CHAPTER 27: Advanced Manufacturing Technology Research on Large Steam Butterfly Valve for Steam Turbine DFMEA Tool System Based on Knowledge Management Research on Feedrate Optimization Based on Cutting Force Model with Double Effect for the Ball-End Milling Rapid Manufacturing Technique of Casting Mould Based on the SLS Singular Problem and Improved Plane Interpolation Algorithm High Efficiency Strategy in Mould Cavity Roughing Oriented Machining Features Effect of Different Particles Distribution on Microstructure and Corrosion Resistance of Nickel-Base Laser Cladding Coatings Verification of Surface Finish as an Indicator of Machinability in Turning Steel X6Cr16Ni10MoTiN Comparison of Forecasting Methods for Thermal Error on High-Speed Motorized Spindle Proposal for Machining Optical Free Form Surfaces Using Atmospheric Pressure Plasma Jet Study on Machining and Measurement for Borosilicate Glass Conical Ellipsoid Synchronous Control of Multi-Integrated System of Electro-Hydraulic with Mechanic Based on Virtual Axis Model Research on Output Power of Plasma for PCVD Synthesizing Silica Glass Investigation of Dry Cutting and Applications of Cutting Fluid in Ball-End Milling Process Development of Recycled TiH2 Feedstock for Powder Injection Molding In-Mold Rheology Curves with Feedstock and Mold Dimension Manufacturing Technology of -Gear and Mold by Fe-Ni Alloy Electroforming In-Process Monitoring and Estimation of Tool Wear on CNC Turning by Applying Multi-Sensor with Back Propagation Technique Development of a HLA/RTI for High Performance Simulation Color Separation Technique of Jacquard Fabric and the Improved Method Thereof Research on Reusable and Sharing Manufacturing Resource Based on Command Intelligent Multi-Agent Modeling and Optimization of Mould Non-Sinusoidal Oscillation Process A New Approach to Precision Cropping with Radial Forging Manufacture Probe with EDM Single Pulse Discharge Research Study of the Effect of Electric Field Distribution to the Pulse Electrochemical Machining The Vibration Analysis and Modal Experimental Study of High Speed Motorized Spindle Cutting Performance of Cemented Carbide-Based Self-Lubricating Tool Embedded with CaF2 Solid Lubricants Progress on Investigation of Pores During Selective Laser Melting of Metal Powders and Future Work Discussion CHAPTER 28: NEMS/MEMS Technology and Devices A Fast Method for Analyzing the Effect of Mask Error on Photolithography Pattern Quality Anti-Overload of a High-G Acceleration Sensor Performance Optimization for a 3-DOF Micro-Motion Device Three-Dimensional Micro-Channel Structure of Graphene Field-Effect Transistor Optimization of Deformation Shape of an Active Electro-Optical Focusing Device Channel Direction Effect on the GaAs Mesfet Performances for MEMS Accelerometer Application Simulation of Miniature Vapor Compression Heat Pump System Performance of Surface Carrier Mobility for Nano-Node Strained (110) MOSFETs with Temperature Effect Design, Fabrication and Analysis of Microrobotic Insect Wings and Thorax with Different Materials by MEMS Technology The Theory Based on the Displacement of Mass of MEMS Gyroscope Used in Spinning Projectiles Analysis and Simulation CHAPTER 29: System Analysis and Industrial Engineering Clothing Workshop Production Line Analysis and Improvement Research Based on IE Modeling and Exergy Analysis of Seawater Source Heat Pump System Dynamic Analysis of Physical Modeling of Underground Gas Storage Application the Cumulative Exergy Analysis to the Optimal Heat Exchange Process Study on the Method of Measuring the Inertia Moment of Multi-Cylinder Engine Modeling and Simulation on the New Technology Diffusion of Cars Using Cellular Automata Production Logistics System Simulation about Automobile Parts Shop Based on Witness and E-Factory Interval Analysis Method of Uncertain Structural Systems Based on Random Model CHAPTER 30: Production and Operation Management Design and Implementation of Performance Appraisal System for Foundry Enterprises Flask Management in the Foundry Moulding Plan Research on Protocol-Based Mechanism and Algorithm for Customer Collaborative Design Task Allocation FTA-Based Human Unsafe Behavior Control in Coal Mine Intrinsic Safety Management An Assessment of Subway Station Capacity Agent-Based Modeling and Simulation on Multi-Stage Supply Chain Operation The Profit and Loss Accounting Method to Propel the Management of the Key Customer in the Coach Industry Research of Customization Model Based on MES Challenges and Opportunities of Logistics Cost Reduction in China under the Background of Low-Carbon Economy Research and Application of Inventory Management System of Foundry ERP Based on Multi-Agent CHAPTER 31: Other related Topics Fisher Discriminant Analysis Model of Drilling Downhole Accidents and its Application A New Type of Packing Apparatus with High Efficiency and the Experimental Research of its Mass-Transfer Performance DOA Estimation Algorithm in Switch Antenna Array with a Single Cycle of Sampled Data Study on MgO-MgO*Al2O3 Bricks Used Burned Zone of Cement Rotary Kiln Application of High Pressure Jet Grouting Technology in the Seepage Control of Earth Dam Reinforcement Macro Analysis Would Like to Drop Half a Drop of Solution The Design of Monitoring System Static Model for Storage and Retrieval Vehicles in an Automated Warehouse Computing Acceleration of FMM Algorithm on the Basis of FPGA and GPU Reforming Teaching and Management System and Improving Engineering and Technical Personnel Practice and Innovation Ability Finite Element Analysis of the Effect of Surface Hardening Depth in Port Crane Wheel Design of Dual-Core Architecture Industrial Robot Controller Based on FPGA CFD-Based Design of the Natural Ventilation System of the Traffic Center of T3 in Beijing International Airport Analysis and Application of Deflection Curve Equation Expressed in Terms of Geometrical Parameters for Compressed Bars Sampling Distribution of the Coefficient of Variation when the Population Takes Normal Distribution N(0, 2) An Analytic Iteration Method of Geometrical Nonlinear Analysis for Frame Structures and its Application Program Research So42- /ZrO2 Solid Super-Strong Acid Esterification Catalyst Prepared by Supersonic Wave Technique An Analysis Method with Equivalent Circuit for the Electrical Effect Induced by Laser Plasma Simulation Study of Converter Coherent Jet Oxygen Lance Effect of Some Factors on Fabrication of Clad Strip by a Roll Caster Multiscale Coupling of Meshless Particle Method and Molecular Dynamics and its Applications at the Nanoscale Odor Source Localization Using Multiple Robots in Complicated City-Like Environments Perturbation Method of Light Scattering for the Probability Distribution Function of Particles' Shape Financial Evaluation of the Listed Electric Power Enterprises in China Based on Entropy TOPSIS Performance Analysis and Numerical Simulation in Elliptical Tubes A Numerical Simulation of the Working Process of Diesel Engine Product distribution during Datong Coal Pyrolysis and Hydropyrolysis Research on Shaft-Less Technology of Inking System Experimental Research on Modifier Optimization of Flotation Process in a Molybdenum Ore in Inner Mongolia Numerical Simulation of Electromagnetic Induction Heating in the Material Heat Treatment A Method for Calculating Deformation of Long-Distance Pipeline Based on Strain The GPU-Based Parallel Implementation of Phase Information Extraction of Multi-View Images Gear Fault Diagnosis Method Based on Cyclostationary Degree and HMM Wireless Sensor Network (WSN) Using in Tunnel Environmental Monitoring for Disaster Prevention Effects of Cellulase Modification on Fiber Surface and Quality of Masson Pine Mechanical Pulp The Research on Green Project Management Evaluation Method of Construction Study on the Coordination Compound of Human-Like Collagen with Copper (II) Analysis on Evolution of Landscape Pattern in Dianchi Basin Based on RS and GIS The Research of Impact in Pipe Pile Squeezing Soil to Bearing Capacity of the Pile The Application of Fuzzy Analytic Hierarchy Process in Community Informatization Level Evaluation A Study on Speed of Fluid in Swirling Abrasive Jet Nozzle and Drilling Hole Performance Emergence of Difficulties among Organizations in Applying Supply Chain Management Via Structure Optimized Design and Study of Copper Interconnect Analysis Methods of Bottom Pressure for Fractured-Vuggy Reservoir Index Properties of Organic and Slightly Organic Soils

by "Nielsen BookData"

Details

• NCID: BB0686490X
• ISBN:
  • 9783037851937
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 4 v.
• Size: 25 cm
• Parent Bibliography ID:
  • BA24926058