Materials and manufacturing : selected, peer reviewed papers from the International Conference on Materials and Manufacturing, September 7-9, 2011 Jinzhou, Liaoning, P. R. China

著者

• International Conference on Materials and Manufacturing
• Wang, Jianzhong
• Qi, Jingang

書誌事項

Materials and manufacturing : selected, peer reviewed papers from the International Conference on Materials and Manufacturing, September 7-9, 2011 Jinzhou, Liaoning, P. R. China

edited by Jianzhong Wang and Jingang Qi

（Advanced materials research, v. 299-300）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection of 301 peer-reviewed papers reflects a meeting of academic research and industry applications, the sharing of R&D experience and the discussion of innovative achievements in the field of materials and manufacturing. It will not only furnish readers with a broad overview of the latest advances, but also provide a valuable summary and reference work for researchers in this field.

目次

Preface, Organizing Committees Part 1 I. Structural Materials Study on the Sewage Treatment by SBBR-BAF Filled with Ceramic Filling Research on Drag Reduction Effect of Concave Non-Smooth Surface in Air Numerical Analysis of Hydrodynamic Lubrication on Water-Lubricated Rubber Bearings The Effect of CF Modification on the Flexural and Tribological Properties of PTFE Composites Evaluation of the Friction and Wear Properties of PEI Composites Filled with Glass and Carbon Fiber Research on Process Parameters Optimization of Squeeze Casting for AZ91D Magnesium Alloy Research on Energy Absorption Characteristics of Honeycomb Sandwich Panels Corrosion and Protection Studies of N80 Steel in CO2 Solution Study on Distribution of TiC Particles in Molten Steel under Electromagnetic Stirring Condition Characterization and Analysis of Ethylene-Propylene Copolymers Negative Thermal Expansion of Gd2Fe16.5Cr0.5 Compound with Th2Ni17-Type Structure Local Stress-Strain Method for the Effects of Scratch on Fatigue Performances of Cabin Glass Research on Substitution of Molybdenum by Manganese in Low Alloyed Bainite Ductile Iron Effect of Minor Compressive Deformation in Austenite on Martensitic Transformation in Modified 9-12%Cr Ferritic Steel The Investigation on the Non-Contact Treatment of the Metal Surface Layer by Using Strong Pulse Electromagnetic Field The Phase-Field Simulation of the Grain Growth under External Field Advanced Stab Resistance Fabrics Utilizing Shear Thickening Fluids Influence of High Current Pulsed Electron Beam Irradiation on Ni-P Electroless Plating Properties of Nanocrystalline Aluminium Fabricated by Warm-Vacuum-Compaction Method Evaluation of the Friction and Wear Properties of PA6 Composites Filled with Nano-SiO2 Dynamic Strain Aging Induced by Cyclic Deformation in Two Magnesium Alloys Superplasticity of AZ91 Alloy ECAPed with Different Routes Study of Epoxy Resin Emulsion by Emulsion Graft Polymerization The TPB and Tribological Properties of Short Carbon Fiber Reinforced Polyimide Composite Preparation of High Surface Area Anatase TiO2 by a Low Temperature Hydrothermal Process Numerical Simulation on the Surface Subsidence Effect during Shield Tunneling Construction Calculation of Statistical Values (S') of Phase Structure Formation Factor (S) and Application to Solidification Theory of Cast Iron Synthesis and Properties of Cerium Oxide Nanoparticles The Study on Precipitation Characteristics in 6082 Aluminum Alloy with Cu Addition Effect of Asynchronous Rolling on Deforming Texture in Al Alloy 6111 Effects of Heating Methods on Recrystallization Texture of an Al-Mg-Si Alloy Experimental Research on the Fracture Properties of Roller Compacted Steel Fiber Recycled Concrete Microstructure and Mechanical Properties of Al-Mg-Sc Alloy Processed by Semi-Solid Continuous Casting-Extrusion Research on the Nanophase Reinforce Cu Alloy Calculation of Statistical Values of Phase Interface Valence Electron Structure Parameters of Cu-Zn Alloy Analysis of the Effect of Nitrogen on Cold Shortness Behavior of Steel with the Electron Structure Parameters of Phase Interface Effects of the Valence Electron Structures of Nitride on Cold Shortness in Steel Influence of Different High Temperature and Heated Time on Properties of Concrete Effect of Process on Microstructure and Elevated Temperature Mechanical Behavior of Multi-Phase NiAl-Fe(Nb) Alloy Microstructure and High Temperature Mechanical Property of Directionally Solidified NiAl-Cr(Mo)-W/Nb Alloy Study on Photocatalytic Performance of F-Doped Nanometer TiO2 Effect of Temperature and Grain Size on the Corrosion Behavior of 316L Stainless Steel in Seawater Electrochemical Corrosion Behavior of Laser Gas Nitrided Layer on the NiTi Shape Memory Alloy in Hank's Solution Microstructure and Hot Corrosion Properties of Laser Cladding of a Co-Base Alloy on the Leaf Surface of Gas Turbine Study on Wear and Corrosion Properties of Ti6Al4V Alloy by Laser Gas Nitriding Study of WC Particles Dissolved by Plasma Surfacing Study on Microstructure and Mechanical Properties of Hot Rolled Steel Plate Strengthened Complexly by Titanium and Molybdenum Post-Process of Density Streaks Image of Flow Field in Supersonic Jet Device Captured by Laser Dual Hologram Interferometry Effect of Mineral Mixture of Steel Slag and Blast Furnace Slag on the Properties of Cement Anticorrosion Conversion Coating Content Lanthanum and Phosphate on Foam Mg Alloy Microstructure Development of Twin Roll Cast AZ31 Sheet in the Pre-Deformation Deep Drawing Process Al-0.90%Fe Alloy Sectional Solidified in a Gradient Magnetic Field Experimental Confirmation of Ni5Al3 Phase in Ni-Al Binary System by Diffusion Couple Technique Simulation of Grain Growing Process of Zinc-Aluminium Alloy under High Pressure Influences of Acting Parameters of Electric Pulse Modification on the Al-22%Si-1.5%Cu Alloy Microstructure and Micromechanical Property of C/C-SiC Composites Development of 360 MPa Grade Heavy Plate with High Performance Application on Statistical Value of Phase Structure Formation Factor to Fe-C Phase Diagram Experiment Study Based on Nano-Ceramic Grinding Wheel Bond The Vehicle Dynamic Load Indentification under the Excitation of Random Road Surface Effects of Elastic Modulus Degradation on Simulation of Stretch-Bend Springback of Dual Phase Steel Influence of Sn Content on the Microstructure and Dry Sliding Wear Behaviour of Hypereutectic Al-20Si Alloy In Situ Observation of Solidification Behavior in a Q235 Steel by Using Electric Pulse Modification Study on Inclusions in Ductile Cast Iron Measurement System of Contact Angle between Molten Steel Droplet and Refractory Material Crystal Growth during the Solidification Process of Continuous Casting Slab Control of Liquid-Drop Surface Shape in Melt Crack Tip Opening Displacement of X100 SAWL Pipe Effects of Pulse Electric Field on the Clusters of Pb-Sn Molten Alloy A New Wind Vibration Control Strategy Based on Active Variable Stiffness Factors Analysis of Non-Aqueous Electrolytic Extraction of Ultrafine Non-Metallic Inclusions Metallurgical Behavior of Adjusted Converter Slag in Reduction Process Web Reinforced AZ91 Composites with Enhanced Strength and Plasticity Effect of Boron on Microstructure and Mechanical Property of High Grade Pipeline Steel Microstructure and Deformation Characteristics of X80 High Deformability Pipeline Steel Theoretical Analysis of the Influence of the Electron Pulse Modification on Al-Cu-Mn Alloy Initial Aging Stage with Valence Electron Structure Corrosion Protection and Composition of Galvanized Steel Substrates by Bis-[3-(triethoxysilyl)-Propyl]Tetrasulfide and Gamma-Aminopropyltriethoxysilane The Effect of Temperature and Pulling Rate on Young's Modulus of Steel FAS390Q In Situ Observation of Growth Process of Phase of 0.15% C Carbon Steel during Solidification Effect of Pulse Electric Field on the Columnar Crystals Growth of Al-5.6 Wt.%Cu during Unidirectional Solidification Research of Shrinkage Process for Fe-0.18%C Cast Ingot during Solidification The Effect of Mixture Parameter on the Properties of SCC Microstructure Evolution of Cold Rolled Hot Dip Galvanized Dual-Phase Steel during Continuous Heating Process Experimental Investigation of Formability Enhancement Using Hydraulic Counter Pressure Assisted Warm Deep Drawing Deformation Behaviour of AZ31 Magnesium Alloy Sheets Produced by Twin-Roll Casting and Sequential Hot Rolling Effects of Al Addition on the Microstructure of Fe-Mn-Si Ultra-Fine Grain Steel Welded Heat Affected Zone Micronano Structure and Mechanics Behavior of Mosquito's Proboscis Biomaterials with Applications to Microneedle Design Semi-Solid Billets of AZ91D Magnesium Alloy Prepared by Forward Extrusion/Equal-Channel Angular Pressing In Situ Observation on Fracture Behavior of 800MPa Grade Dual-Phase Steel Effects of Different Melt Modification Techniques on the Structure and Properties of Silicon Brass Molecular Dynamics Simulation Study of the Structural Evolution in the Cu-Ni Coalescence Induced by Ni Heterocluster Effects of Electric Pulse Modification on the Hot Tearing of Al-5%Cu-0.8%Mn Alloy Effect of Partitioning Temperature on Work Hardening Behavior of Q&P Steels Influences of Melt Temperature on Casting Structure of Al-Cu-Mn Alloy Treated by Electric Pulse Modification Non-Symmetrical Load Influence on Aluminum Alloy-Welded Joint Fatigue Limit Bulk and (001) Surface Properties of TiAl3 Compound Research on Stress-Strain Relationship Model of Concrete Prism Confined by GFRP Corrosion Behavior of Zr53.5Cu26.5Ni5Al12Ag3 Bulk Amorphous Alloy in 3.5% NaCl Solution Effect of Temperature on Geometric Accuracy of AZ31 Profile during Warm Pre-Tension Rotation Bending II. Functional Materials Characterization of Ag Doped P-Type ZnO Thin Films Prepared by Electrostatic-Enhanced Ultrasonic Spray Pyrolysis Methods of Improving Shape Memory Effect of FeMnSiCr Alloy Pipe Joint Heteroepitaxy of ZnO Films on Epi-GaN/Al2O3(0001) by MOCVD Magnesium Incorporation in Sol-Gel Derived Apatite Coating on Ti6Al4V Substrate Synthesis and NLO Properties of Calix[4]Arene Derivatives The Blue Luminescence of CeCl3 Doped Aluminum Oxide Thin Film Study on the Effects of the Self-Healing Microcapsules on the Tensile Properties of Polymer Composite Oxidation Behavior of a New Ni-Base Superalloy in Air at 850 DegreesC and 950 DegreesC Injection Molding Preparation and Film Formation Performance of Powders-Modified Polyethylene Biomass Carrier for Aerobic Process Sensitivity to NO2 of ZnO Film Prepared by Electrostatic-Enhanced Ultrasonic Spray Pyrolysis Study on Effect of Sintering Temperature on Microstructure and Compressive Property of Porous NiTi Alloys Microwave Absorbing Properties of FeXCo1-X(x=0.7, 0.8) Alloys with Spherical Nanoparticles Study on Preparation of SiO2 Optical Fiber Preform by SG Method Fabrication and Sinter-Ability of Ce3+-Doped YAG Ceramics by Low-Temperature Combustion Method First-Principles Study on Ga-N Co-Doped P-Type ZnO Effect of BaO on Thermo-Physical Properties of Lithium Zinc Silicate Glass-Ceramics In Vitro Behavior of Magnesium Apatite Coatings in Organic Modified Simulated Body Fluid The PTCR Performance of Nb-Doped BaTiO3-NBT Ceramics Synthesis and Lithium Storage Performance of Sn-Co/C Composite Anode Materials for Li-Ion Battery The Magnetocaloric Properties of (Mn1-XFeX)5Sn3 Compounds Prepared in Magnetic Environment The Magentocaloric Effect of Gd5Si2Ge2-XZnX Alloy Structural, Electrical and Optical Properties of Li-Doped ZnO Thin Films Influenced by Annealing Oxygen Pressure Study on Surface Oxidation Behavior of Pourous NiTi Alloy at High Temperature Broadband ~1.5 m Emission of Er3+ in Heavy Metal Germanium Tellurite Glasses for Optical Fiber Amplifier Synthesis of Nano Amorphous In2O3 by Microwave Method and its Photocatalysis Up-Conversion Luminescence Properties of Gd2O2S:(Yb3+,Er3+) Nano-Particles Synthesized by a Co-Precipitation Method Synthesis and Growth Mechanism of NbSe2 Nanostructures Morphology Control of Cobalt Oxalate Particles under the Action of Pulsed Electromagnetic Field Study on Preparation and Optical Absorption of Ge Doped TiO2 Composite Thin Films by Sol-Gel Method Influence of Electrical Pulse on Shape Memory Effects and Phase Transition of FeMnSiCrNi Shape Memory Alloy Study on the Influence of Different Pulse Temperatures on Al-22%Si Alloy Solidification Structure Effects of Electric Pulse Treatment during Solidification on the Solidification Structure of Al-5%Cu Alloy Analysis of Structural Condition and Thermodynamics Condition of Graphite Heterogeneity Nucleation in Cast Iron Preparation of Pd-TS-1 Composite Membrane for Hydrogen Separation Study on the Activation Energy of Nanocrystallization of Amorphous Fe78Si9B13 Alloy Treated by Low Frequency Pulse Magnetic Field Fabrication and Characterization of Yttrium Lanthanum Oxide Transparent Ceramics Using Powders Prepared by Different Methods Theoretical Calculation of Transition Temperature of Ti-6Al-4V from Valence Electron Level The Promotional Effect of Lanthanum Additive on the Apparent Electrocatalysis of Ti/(Ru,Ir)OX Electrode Hemocompatibility of TiO2 Nanoparticles Composite PTFE Coating for Medical Devices Effect of Synthesis Conditions on Photocatalytic Activities of Nanoparticulate TiO2 Influence of Processing Parameters on Atmospheric Pressure Plasma Etching of Polyvinyl Alcohol Films Photoluminescence of (Gd1-x,Dyx)2O2SO4 Phosphors Synthesized by Homogeneous Precipitation Method Study of Modified Properties on Electrolytic Phosphate Coatings with Nano-Al2O3 Preparation of Special Microstructures by Polystyrene-Block-Poly(methyl methacrylate) Surface Micelles Fabrication and Luminescent Properties of Eu3+-Doped Yttrium Lanthanum Oxide Transparent Ceramics The Effect of Sc2O3 on Yb3+-Doped Y2O3 Transparent Ceramics Spectral Properties of Pr3+:La2O3 Ceramics The Preparation and Characterization of LaAlO3 Translucent Ceramics Fabrication and Spectroscopic Properties of (Ho0.01La0.10Y0.89)2O3 Transparent Ceramics Effect of Y Addition on Mechanical Properties of Ni50Mn28Ga22 Magnetic Shape Memory Alloy Study on Polyethylene Glycol Acrylate Crosslinked Gels as Phase Change Materials Study on the Preparation and Properties of PEG Phase Change Materials Fixed by Semi-IPN High Responsive ZnO Nanowire UV Sensor A Preliminary Study of Anodization and Electroless Ni-P Plating on AZ80 Magnesium Alloy Automatic Setting Control of the Raw Slurry Blending Process Based on the Case-Based Reasoning Study on Preparation of Gradient Porous NiTi Alloys by Powder Metallurgy Method Effect of Post-Annealing Ambient on Electrical Structural Properties and Optical Properties of ZnO:Al Transparent Films Surface Treatment of TC4 by Micro-Beam Plasma Arc Part 2 III. Composite Materials Investigation on the Wettability between Nb-Al Alloy and Porous Al2O3 Ceramics Prepared by Freeze Casting Effect of SnO2 Coating on the Low Temperature Extrusion of 6061Al Matrix Composite Reinforced with Aluminum Borate Whisker Simulating Study on Microwave Assisted Switching of Ferromagnetic Moment for Grains Influence of Die Angle on the Extrusion Behavior of 6061Al Matrix Composite Reinforced with SnO2-Coated Aluminum Borate Whisker Effect of Voltage and Current Density on the Coating Performance of Micro Arc Oxidation on Pure Titanium Metal Preparation of Flexible Polymer-Cement Mortar Research of SiCP/2A50 Composite Materials Creeper Treads Prepared by Liquid Forging Preliminary Approach to Mechanical Characteristics of Cement Mixed Superfine Iron Tailings Preparation and Characterization of Core-Shell -Fe2O3/Au Composite Wearability of SiCP Particle Reinforced Aluminum Matrix Composites Creeper Tread Complex Modification on Microstructure and Properties in Mg2Si Reinforced Hypereutectic Al-Si Composite Synthesis and Microwave-Absorbing Properties of Al2O3 Coated Polyhedral Fe Nanocapsules Prepared by Arc-Discharge Method Experimental Study on Strength of Connections to Concrete Filled Tubular in Fire Comparative Study of Two Types of Alkali Lignin from Different Origin Study on Mechanical Properties of EPDM/HPVC Prepared by Dynamic Vulcanization Dynamic Mechanical Thermal Analysis of Pultruded Carbon Fiber/Resin Composite Cable Cores Effect of DLC Film on Tribological Properties of Carbon/Carbon Composites Preparation of Magnetically Modified Zeolites and the Application of Metal Ions Adsorption Research on Mixture Design and Mechanical Performance of Porous Asphalt Concrete in Cold Regions Roll Casting of a Wire Inserted Strip Orientational Analysis on Static Recrystallization at Tension Twins in AZ31 Magnesium Alloy Effect of Solution Concentration on Growth and Photoluminescence of ZnO Nanorod Arrays The Influencing of Fibers on the Concrete Used to Nuclear Waste Container Study on the Friction Properties of Porous Al2O3 Ceramic/ Al2O3 Ultrafine Particle/ Epoxy New Composites Mechanical Properties and Wear Behavior of Polypropylene/Carbon Nanotube Nanocomposites Thermal and Electrical Properties of Polypropylene/Carbon Nanotube Composites Study on Making Ceramic Composite Steel Plate by SHS Process Scanning and Modeling of Large Thin-Walled Curved Surface Part Manufacturing Process of Large Scale Sandwich Structure with Variable Thickness of PMI Foam Core Manufacturing Brake Pads by Using Hot Powder Preform Forging for Low Duty Applications Effect of Milling Time on the Properties of Nanocrystalline CuCr50 Alloys IV. Advanced Manufacturing Process and Technology Research on Intelligent Soft Starting Method for Three-Phase Asynchronous Motor Based on MATLAB Modeling and Simulation on Four-Way Valve Control Motor System of Cable Car Reel Design of Monitoring Device for Goods Train Based on Zigbee Technology Research and Application of an Enhanced Data Mining Algorithm in Virtual Manufacturing Technology H Controller for Networked Nonlinear Manufacturing Process Interconnected Systems Based on T-S Fuzzy Model Study on the Reliability Allocation Algorithm Based on Partial Squares Sum Research on Iterative Learning Servo Controller of Permanent Magnet Linear Synchronous Motor Study on a Novel Single-Stage QR PFC Converter Engineering Application Research on PLC in the Oily Water Treatment Mechanical Device Study on Voltage Stability of Electricity Network Structure Based on the Eigenvalue Method Influences of Technology Parameters of Heavy Shell Ring Rolling Mill with Double Drive Rolls Based on FEM CAE Optimization Design of Mine Hoist Spindle Device Progress on Measurement of Adhesion Strength of Marine Microfouling Organisms Design Method for a Pair of Oval Bevel Gears Middle-Convex Curve and Ellipse Surface of Piston Skirt Design Based on MATLAB and Pro/E Simulation and Redesign of Industrial High-Speed Sewing Machine Based on Performance-Driven Research on Manufacture Processes of Resin Dry Transformers Based on Object-Oriented Petri Net Study on Geometrical Parameters Definition for Section Curve of Fully Intermeshing Twin Screw Weld Width Control System for Pulsed MIG Welding of Aluminum Alloy Study on Stress Intensity Factors for Circumferential Cracked Elliptical Pipes under Tension Fatigue Analysis of the Aircraft's Hydraulic Pipes Based on Fluid-Structure Interaction Finite Element Analysis of 35 Tons Steel Coil Overturning Machine The Virtual Design of Cluster Straw Fuel Briquetting Machine Preliminary Research on Length Conversion Factor of Assemble Boom Research for Tool Face Mathematical Model of Multi-Facet Drills Used in Processing High Manganese Steel Analysis and Simulation of Velocity and Acceleration Based on Three-Translational Parallel Mechanism Research on Surface Morphology of Three-Dimensional in CNC Cylindrical Grinding Study on Fatigue Life Prediction of Mechanical Components with Stochastic Cyclic Load Application The Numerical Simulation and Optimization of Squeeze Casting Process for Producing Magnesium Wheels Experiment Research on Impact of Total Rolling Reduction Ratio on the Properties of Vacuum Rolling-Bonding Ultra-Thick Steel Plate Influence of Welding Residual Stress on Stress Intensity Factor of Two-Dimensional Cracks Numerical Simulation of Performance of Steam Ejector Influenced by the Distance between Nozzle Outlet and Mixing Chamber Inlet An Approach for Application of Drive at Center of Gravity in a Vertical Machining Center Vibration Simulation of Disc Vibration Dryer Based on ADAMS Study on Forming Feasibility of AISI-5140 Triple Valve by Multi-Way Loading: From Aspect of Geometric Parameters Curvature Characters of Revolving Curved Surface and Applications in Math Model of Milling Cutter Research on Mold's Reverse Modeling and Basic Surface Repair Optical Path Design and Gain Anticipation in Tm3+ Doped Glass Channel Waveguide for U-Band Amplification Finite Element Analysis of Spindle for Turning Center Based on ANSYS The Deformation Rule of the Cooled U75V Heavy Rail Caused by the Different Heat Transfer Coefficient 3D Numerical Simulation of Point Impact Breakage of a Glass Ball Surface Quality of Pulsed Laser Cutting of Difficult to Machine Steel Carbon Nanotube Templated Growth of Nano-Crystallinity ZSM-5 Mechanical Design of Bionic Snake Mouth and its Analysis The Optimum Design of A2JK Hoist Drum Based on ANSYS Research on Cutting Force of Milling Aviation Aluminum Alloy Investigation of Water Cavitation Peening-Induced Microstructures and Residual Stress in the Near-Surface Spring Steel SAE 1070 Study on Web-Based Collaborative Design of Air-Hydraulic Intensifier Research on Breaking Chip and Drilling Force for High Temperature Alloy Based on Self-Vibratory Drilling Head Research on Bending Process of Integral Panel Skins Machining of Metal Matrix Composites with Minimum Quantity Cutting Fluid and Flood Cooling Discussion on Binding Additives and Binding Process in Selective Laser Sintering Surface Quality Analysis in Mill-Grinding of SiCp/Al Structure Analysis of Hybrid Self-Reconfigurable Modular Robot Nano-Particle Manipulated with Near-Field Optical Tweezers Simulation Analysis of an Eddy Current Sensor Array Based on Finite Element Method The Effects of Hollow Ratio on the Radial Bearing Properties of Pre-Loaded Cylindrical Roller Bearings The Modal Analysis for Spiral Bevel Gear Based on Patran/Nastran Application of Yolico YD5200 Frequency Converter in Mine Hoist 3D Model Registration Based on Feature Extraction Study of Friction Stir Welding Technics and Weld Performance of Dissimilar 6063-3A21 Aluminum Alloys Research of a Piezoelectric Driving Linear Movement Device Effect of Bending Direction on Springback of High Strength Steel Sheet Effect of Tempering Holding Time on Performance of Wear-Resistant Steel of High Pressure Blower Impeller Underground Tunnel Development Survey of Shield Tunnelling Machine The Optimization Design of Cheese Bionic Kneader with Response Surface Method(RSM) Distributed and Cooperative Organization of Information Platform for Manufacturing Clusters The Study on CAD Technology of Reconfigurable and Module for Vertical Bag Packaging Machine Preparation of Bio Tissue Micro Array Based on NC Positioning and Image Processing Technology Research on a New Type of Ultrasonic Polishing Vibrator Residual Stress Measurement for Coated Film on Cold Work Tool Steel Influence Analysis of Machining Errors on Bearing Capability of Internal Gear Pair Effect of Shoulder Diameter on the Resulting Interfacial Regions of Friction Stir Welds between Aluminium and Copper Effect of Scan Velocity on Resulting Curvatures during Laser Beam Bending of AISI 1008 Steel Plates Design of Hydrostatic Pressure Tests Automatic Control System on Oil Pipeline (bolster) by PLC and IPC FEA of Solid Stream Coupling Field Formed by Automobile Engine Cylinder Head and Cylinder Head Gasket A Regression Model for Force and Surface Roughness Estimation during Hard Turning Study on Identification Method of Geometric Parameter Errors of 6-DOF Parallel Machine Tool Research on Seamless INS/GPS Integrated Navigation Algorithm Monitoring System Design of Fuse Automatic Assembly Machine Based on WinCC Vehicle Engineering Application Study on TSF Var Compensation Method for Electric Locomotive of Electrified Railway Study on the Speed Control of Diesel Engine Based on Neural Sliding Mode Control V. Vehicle Engineering Technology Design of Measurement and Control System for the Rail Fastening Spring Clip Type A and B Experimental Determination of Aircraft Structural Material Life Envelope Study on Expression of SIF for Tapered Lug Subjected to Oblique Pin-Load Study on Locally Resonant Phononic Crystals Based on Automotive Noise Control Simulation Analysis and Research of Tire Wear Research and Application of Genetic Algorithm in Material Handling Route for Assembly Line of Airbag A New Analytical Method for Influences of Shock Absorber Rubber Mount on Automotive Ride Comfort Crashworthiness Design of Vehicle Body Based on Factorial Screening Modeling and Simulation with Finite Element Method in Car Seats Optimization Design of Double Wishbone Front Independent Suspension Based on ADAMS Aerosol Behavior in the near Wake Region of the Vehicle Random Vibration Analysis of Heavy-Duty Truck Based on Pseudo Excitation Surface Reconstruction of Auto Outer Door Panel Based on Reverse Engineering AHP Approach for Supplier Selection in a Polyamide Fiber Plant in Supply Chain Management Simulation for Vehicle Handling Performance Based on the Cybernetic Model of "Driver-Vehicle-Road" Closed-Loop System The Motive Reliability Design of Mechanical Structure Stability Optimal Control Based on 15-Dof Vehicle Model Research on Congestion Mitigation Strategy Downstream Off-Ramp for Urban Expressway Based on Fuzzy Logic Method Study on Bike Rental Pricing Model under the Low-Carbon Mode Study on the Relationship of Airbag Effect and Occupant Position Using the Law of "Three Points and Two Sections" to Reduce the Risk of Vehicle Collisions Natural Frequency Study of Automotive Engine Valve Spring by Experimental Method Coordination between Road Network and Economic Development Based on WPDEA Design and Controlling Study on Electro-Hydraulic Mix-Drive Cooling System in Vehicle Research and Implementation of Batteries Charging Management System for Electric Vehicle Jackknife Control on Tractor Semi-Trailer during Emergency Braking Engine Fault Diagnosis Based on PSO-BP Network Research on Outlier Mining Algorithm Oriented to Traffic Information Study on Assessment Method and Statistical Distribution of Cylinder Error Component of Cu/n-SiO2 Composite Particles by Mechanical Milling Research on Synchronous Testing Technique of the Shock Absorber Performance in Automotive Coaxial Suspension Elemental Identification of Materials Using Optical Emission Spectra during Electric Discharge Machining Single Discharge of Dry -EDM on Silicon: Crater and Plasma Temperature Measurement

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB06865130
• ISBN:
  • 9783037852019
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 2 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058