Advanced measurement and test : selected, peer reviewed papers from the 2011 2nd International Conference on Advanced Measurement and Test (AMT 2011), June 24-26, 2011, Nanchang, China
Author(s)
Bibliographic Information
Advanced measurement and test : selected, peer reviewed papers from the 2011 2nd International Conference on Advanced Measurement and Test (AMT 2011), June 24-26, 2011, Nanchang, China
(Advanced materials research, v. 301-303)
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
- Part 3
Available at 1 libraries
  Aomori
  Iwate
  Miyagi
  Akita
  Yamagata
  Fukushima
  Ibaraki
  Tochigi
  Gunma
  Saitama
  Chiba
  Tokyo
  Kanagawa
  Niigata
  Toyama
  Ishikawa
  Fukui
  Yamanashi
  Nagano
  Gifu
  Shizuoka
  Aichi
  Mie
  Shiga
  Kyoto
  Osaka
  Hyogo
  Nara
  Wakayama
  Tottori
  Shimane
  Okayama
  Hiroshima
  Yamaguchi
  Tokushima
  Kagawa
  Ehime
  Kochi
  Fukuoka
  Saga
  Nagasaki
  Kumamoto
  Oita
  Miyazaki
  Kagoshima
  Okinawa
  Korea
  China
  Thailand
  United Kingdom
  Germany
  Switzerland
  France
  Belgium
  Netherlands
  Sweden
  Norway
  United States of America
-
Tokyo Institute of Technology Ookayama Library
Part 1A25118/301400043116,
Part 2A25118/301400043124, Part 3A25118/301400043132
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This second collection on "Advanced Measurement and Test II" is dedicated to the electronic testing of devices, boards and systems; covering the complete cycle from design verification, design-for-testing, design-for-manufacturing, silicon de-bugging, manufacturing testing, system testing, diagnosis, failure analysis ... and back to process and design improvement. This will be an invaluable guide to the topics.
Table of Contents
Preface, Organizing Committee
Chapter 1: Material Science and Technology
Synthesis of PEG200 Lauric Acid Diester and the Performance Test of Viscosity
Synthesis and Imidization of Polyamic Acid
Electrochemical Property of Terbium Doped Tantalum Oxide Film Electrode
Effect of Different Precursor and Carbon Fibre Content on Unidirectional C/C Composites Interlaminar Bonding Strength
A Dissertation on Polysiloxane-Antifoaming-Agents: Antifoaming Principles, Synthesis and Compound
Studies on Ceramics Technique
Influences of the Compatibility between the Polymer and Solvent on Ordered Microporous Structure Formation by Water Droplets Templating
An Image Analysis Method for Studing Yarn Cross-Sectional Structure
A Novel Photonic Crystal Fiber with Two Rings of Hybrid Elliptical Air-Holes for Single-Polarization Single-Mode Operation
A Single-Polarization Single-Mode Photonic Crystal Fiber with Four Lines of Small Elliptical Air-Holes
Study on Al-Doped ZnO Nanofibers Prepared by Electro-Spinning Technique
Research on On-Line Detection Technology for Yarn Evenness
Research on Polyvinylidene Fluoride Hollow Fiber Hemodialyzers
Material Classification Using Random Forest
Molecular Dynamics Deformation Simulation of Carbon Nanotube Probes
Simulation of Temperature and Stress Field of Titanium Alloys under Laser Cladding
The Thermal Conductivity Simulation Calculation of Polyacryonitrile-Based Carbon Fiber/Pitch-Based Carbon/Carbon Composites
The Real-Time Detecting Application of CNTs in 3D Braided Composite Material
Structures and Properties of Modification Copolyester Fiber
Synthesis, Characterization and Anticorrosion Performance of Modified TiO2 as Inhibitor
Optimized Simulation for GaN Growth in Vertical HVPE Reactor
A Novel High Efficiency Solution of High Power LED Lighting
Path Planning of the Robot for Aero-Engine Turbine Blades Maintenance
Study and Implementation of Expendable Current Profiler Measurement
State Characteristic Parameters Extraction Method of Wind Turbine Blades Based on the Length Fractal Dimension
The Design of the Detection and Localization of the Color Image for the Location of Road Traffic Signs
The Finite Element Analysis in Measurement System of Airplane Fuel Mass
The Motion Control of Clothes Model Robot and Measurement of Clothes Energy Consumption
Quality Detection and Specie Identification of Apples Based on Multi-Spectral Imaging
Study on the Factors Influencing Spreading Resistance of Heat Sinks
Theory Study on Structure Property of N-Ethyl Morpholinium Ionic Liquid of Different Alkyl Length
The Radial Velocity Measurement and Error Analysis for Low Resolution Spectra
SHSD Demodulator of Interferometric Integrated Optical Acceserometer Based on SOPC
A Novel Faint Signal Processing Method for Sensitivity Improvement of Pump/Probe-Based LG/LD SAW Spectroscopy System
Fluorescent DNA Biosensors on Silica Microspheres
Automatic Detection of Illuminant Reflection in Indoor Vision-Based Navigation
Research on the Utilization of AR Coating to Improve the LED Luminous Efficiency
Electrochemical DNA Biosensor for the Detection of Short DNA Species by Using Compound Co(phen)32+
The Low Beam Light Optical Configuration of High Brightness LED Headlamp
Secondary Optical Design of LED Road Lights
Fabric Defect Detection Method Based on Gabor Filters
Isobaric Vapor Liquid Equilibrium (VLE) Data of the Systems Ethylene Glycol-Glycerol and 1,2-Propylene Glycol-Ethylene Glycol at 20Pa
The Content Determination of Strongly Acidic Alkyl Phosphate with the Method of Potentiometric Titration
Improvement of Gaussian Random Measurement Matrices in Compressed Sensing
Partition Slub Yarn into Slub Parts and Base Parts
Design of Antenna with a Solar Cell as a Parasitic Element in the UHF RFID Tag
Quantum Chemical Calculation on 1H NMR Chemical Shifts of PMMA/PVPh Blends
Application of Coordinate Measuring Machine in Reverse Engineering
The Design of Large Image Scan Using Phototransistor Array
Study on Biodegradation of Corn Straw
Laser Surface Strengthening on Module Steel
Semi-Continuous Reactive Batch Distillation for Production of Methyl Formate
Study on Luminance Uniformity Correction for the LED Flat Panel Display
Using Perturbation FEM Compute the IC Interconnect Parasitic Capacitances Considering Process Variation
Mercerizing Lye Concentration Online Measurement and Control
Fractal Prediction Model of Friction Coefficient in Dry Friction Pair
Combustion Kinetics of Pellets Made by Sewage Sludge, Pulverized Fuel Ash and River Sludge
Pattern Recognition of the Steel Rod Based on Artificial Neural Network and SVM
Efficient Terahertz Surface-Emitted Difference Frequency Generation in Periodically-Inverted GaAs Crystals
Experimental Study on Strength Characteristics of Cement-Soil under Fixed Spherical Pressure Condition
Effect of Voids on Moisture Absorption of CFRP Laminates in Hygrothermal Environment
Cloning, Expression and Characterization of -Glucosidase from L. Delbrueckii Subsp. Delbrueckii in Escherichia coli
Finite Element Numerical Simulation of Two-Dimensional Ground Water Solute Migration Question
A Case Study on Energy Saving and New Energy Services
2-(2'- Chloro Phenyl)- 5- (2'-Hydroxyl Phenyl)-1,3,4-Oxadiazole as a Florescent Probe for DNA Determination
The State-of-the-Art Surveys for Application of Metal Magnetic Memory Testing in Remanufacturing
Research of Water Heater Automatic System
The Energy Saving Effect Evaluation for Outside Wall with Different Material in Island District
Using Fuzzy Rough Concept Lattices Merging and Presenting Domain Ontology
3D Surface Acquisition and Reconstruction for Assessing the Extent of Strain Ratcheting and Wrinkling in Steel Tubulars
New Technologies for Submillimeter Laser Ranging
Photonic Logic Gate Design Based on Frequency-Sensitive Optical Response of an EIT Photonic Crystal
Research in the Workflow Engine Based on Micro Kernel
Strain Performance of Fiber Bragg Grating Sensor Fixed by Different Adhesives
Advances on the Extraction and Separation Technologies in Tea Aroma Components Research
Measurement of Wall Thinning through Insulation with Ferromagnetic Cladding Using Pulsed Eddy Current Testing
Design and Test of Magnetorheological Damper with Embedded Controller
Model Reference Adaptive Control for Magnetorheological Damper Subjected to High Impact Load
Removing Direct Wave of Through-Wall Radar Based on Singular Value Decomposition
AE Signal Analysis of Carbon Fiber Reinforced Composites Based on Hilbert-Huang Transform
Material Flow Estimation of Deep-Drawn Product by Using Finite-Element Simulation
Numerical Simulation for Relationship between Vortex Evolution and Diffusion of Aerosol in Human Mouth-Throat Model
Research of Anticorrosion in Desulfurization Flue
Design of Software and Hardware Based on JRB230240B LCD
Evaluation and Classification of Black Soil Structure Degradation in Jilin by Factor Analysis and Dynamic Clustering Analysis
Numerical Analysis of Effect of the Number of Nozzles on Water Mist Flow Field for Gas Explosion Suppression
Microscopic Displacement Mechanism of Surfactant/Polymer Driving Residual Oil in Conglomerate Reservoir
The Three-Dimensional DEM Modeling of Gravel Materials
Recent Development in Friction Test Methods and Apparatus of Polymer Composites
Research and Practice of New Gas Sensors Based Materials on Internet of Things
Research and Development of Thin Film Gas Sensor and its GPRS Wireless Sensor Based on Internet of Things
Estimation of Thickness of the Sediments in a Circular Pipe by Finite Element Method
Principle and Method for Oxidation Layer Measurement in Electrolytic In-Process Dressing (ELID) Grinding
Study on CA-Based Quality Prediction Model of Internal Cracks in Continuous Casting Billet
The Research of the Improvement of Iris Location of the Sobel Algorithm
Effects of Soil Compaction to its Shear Property
3D Model Based Machining Process Planning
Chapter 2: Measuring and Testing Technique
Camping Performance Experiment of Gas Thrust Bearing with Elastic Pressure Equalizing Groove
Study on Bonding Wire Breakage Detection Using Diffraction of Light
Monitoring Data Analysis of Dalian Subway Tunnel and Inversion of Rock Parameters
Displacement Back Analysis Based on Return Mapping Algorithm and Differential Evolution Algorithm
Determination of Cadmium in Bivalve Molluscs by Microwave Digestion with Inductively Coupled Plasma-Mass Spectrometry
Analysis and Experimental Study on the Characteristics of Leakage of Rotary Seal Using Sealing Ring
Overpressure Measurement on the Thermal Explosion of Shell Charge
Research on Laser Measuring Instrument for Tunnel Surface
Relative Thermal Contrast Analysis in the Inspection of Wind Turbine Blades Using Pulsed Thermography
A Non-Destructive Testing Based on Electromagnetic Measurements and Neural Networks for the Inspection of Concrete Structures
Imaging and Testing of Ultrasonic Sh Guided Waves in Plate with Lap Welding Structure
Thermal Characteristics Simulation of the Commissioning Process for New Buried Heated Oil Pipelines
Measurement System for Non-Cylinder Pin Hole of Piston
Young's Modulus Detection for Ultra-Thin Film by LSAWs Technique with Wavelet and FIR Filter De-Noising
Modal Parameter Validation in Coupled Vibro-Acoustical System
Research on the Quantitative Analysis of Subsurface Defects for Nondestructive Testing by Ultrasound Lock-In Thermography
Land Subsidence Detection by PSInSARTM Based on TerraSAR-X Images
Research on High-Accuracy Low-Power Ultrasonic Flow Measurement and Instrument
Transient Analysis of Plane Wave Reflection from a Lorentz Half Space
A Watermarking Algorithm for Relational Database Based on Image
Mechanism Analysis of Induction-Type Coil Target for Velocity Measurement
Research of Measurement Method of Two Dimensional Configuration Drag Test in Wind Tunnel in Case of High Lift
An Improved Incremental Training Algorithm of Support Vector Machines
A Joint ICI Mitigation Method Based on Decision Feedback and Pilot Tracking
Mining Successful Weight Loss after Bariatric Surgery by Using Multivariate Adaptive Regression Splines
Risk Management of Electric Energy Consumption in Industrial
A Novel Elman Algorithm Based on Sectional Least Squares
A Cost Function-Oriented Quantitative Evaluation Method for Unmanned Ground Vehicles
Based on Biped Robot Walking in Horizontal Surface Research of Dynamic Simulation
Surface Accuracy Measurement of a Novel Inflatable Antenna by Photogrammetry
Processing of Sonar Image Based on Compressive Sensing
Groundwater Vulnerability Assessment System Based on GIS
The Application of Kalman Filter in Optical Measurement of Benzene
An Improved Blind Multiuser Detector Algorithm Based on Subspace Tracking
Research and Development the Method of Transformer Winding Deformation Fault Diagnosis Based on FRA
Real-Time Detection of the Repose Angle of Solids in Rotating Drum Based on Image Processing
Measuring the Phthalates of Xiangjiang River Using Liquid-Liquid Extraction Gas Chromatography
Statistic Analysis of Examination Results and Examination Design Quality
Empirical Tests of Scale-Free Geometry in NASA DATA
Loading Priority Evaluation Based on PRISM Classifier
Optimal Placement of Phasor Measurement Units Based on Information Entropy Property Evaluation
Experimental Study of Static Aerodynamic Coefficients of Bridge Section
Analogy Analysis about Shape Coefficient of the Abnormal Roofing Structure with the Standard
Transverse Vibration Measurement and Analysis of a Three-Point Supported Dual-Span Rotor System with Angle Misaligned Flexible Coupling
Adaptive Edge Detection Method for Image Polluted Using Canny Operator and Otsu Threshold Selection
Model Research on the Evaluation of Traffic Sustainable Development
Western Region County-Level Highway Fuzzy Comprehensive Evaluation Research
Application of LabVIEW in Emulation Study on Time-to-Count Measuring System
A Method to Improve the Accuracy of Adjustable Phase Difference of Signal Generator
Optimizing the Design Parameters of Spherical-Cymbal Transducer Based on Comprehensive Point-Rating Method
The ERP Detection of Mental Arithmetic Strategies
Research on Corrugated Diaphragm Sensing Technique Detecting the Pressure outside the Casing
Numerical Simulation of the Double-Cones Flow-Meter on its Expansibility Factor
A Survey of Image Edge Detection Based on Grey Theory
Image Matching Based on Bacterial Foraging Algorithm
The Research of Pedestrian Platoon Multiple Events at Signalized Intersection
Determination of Surface Acoustic Admittances by Inverse Solution of Finite Element Modeling in the Pipes
Sensor Compensation Based on Adaptive Ant Colony Neural Networks
The Propagation Properties of the Vector Dark Soliton
Measurement and Analysis of the Chinese Elite Male Swimmers' Basal Metabolism of Nicotinamide Using NMR-Based Metabonomic Technique
An All-Around Measurement and Evaluation of the Chinese Elite Youth Canoeists' Physical Characteristics Using Factor Analysis Model
Research on the Detection of Faulty Insulator Strings
Microwave Power Real-Time Soft-Measuring Based on Improved BP Neural Network
Surface Shape Measurement Using Extended Photometric Stereo
Research on Testability Evaluation Method of Complex Equipment Based on Test Data in Development Phase
The High-Speed Ultrasonic Testing Method for Steel Pipes Based on Linear Reciprocating Probes
Quantitative and Comprehensive Evaluation of Qualitative Indices in Dam Safety Monitoring
Initial Design of FAST Engineering Surveying Control Network
Experimental Research on Transition and Flow Separation of Laminar Airfoil
The Slipping Shoe Motion Trajectory Analysis and Simulation of Spherical Swashplate Type Axial Piston Pump
Integrated Application of Three In Situ Stress Measurement Techniques
Study on a Method to Measure Welding Arc Plasma Axis Temperature at Fixed Point
Implementation for High-Precision and Non-Contact System for the Measurement of Crankshaft and Camshaft
Acoustic Method of Detection of Optical Thin Films Damage
Virtual Instrument-Based Cable and Harness Test System Hardware Design and Development
Lab Windows/CVI Platform-Based Cable and Harness Test System Software Design
Measurement of Flame Height by Image Processing Method
A SAT-Based Pattern Generation Method for Diagnosis Multiple Scan Chain Faults
A Vernier Delay Line for Time Interval Measurement
Research of a Measuring System for UV Absolute Spectral Response Based on ECPR
FPN Analysis and Processing of the Science Grade CCD Alta U9000
Design and Development of Crude Oil Security System Based on Photoelectric Beam Detector
Application of Data Protection in Motor Test and Control System
Novel Measurement Method of Small Phase with Interference Phase Contrast
The Design of Automatic Detection and Classification System for Recycled Drill Pipe
Analysis and Evaluation of InSAR Phase Unwrapping Approaches
Precision Analysis of Gravity Vertical Gradient Measurement Based on CG - 5 Relative Gravimeter
Study on Sub-Pixel Techniques for Accurate Image Measurement of Displacement
Research and Implement the Image Retrieval Method Based on the Shape Feature
A Wireless Pulse Signal Acquisition System for Status Monitoring of Ship Navigators
Study on Texture Features of Cingulum in Different Gender Patients with Alzheimer's Disease and Mild Cognitive Impairment Based on MR Images
Work Piece Length Measure System Based on Image
A Novel Method for Online Measuring the Short-Circuit Impedance of Distribution Transformers
Measurement of Laser Ablation Micro Impulse Using the Torsion Pendulum Interferometry
The Measurement Correction of MEMS Gyroscope Based Interlaced Kalman Filtering
Conflict-Driven Learning in Test Pattern Generation
Measurement of the Ratio of Tea Polyphenols to Amino Acids in Green Tea Infusion Based on near Infrared Spectroscopy
3D Groundwater Modelling Using Well Drilling Data in Tanggu, China
Direct Phase Detection Utilizing Phase Contrast Imaging
Static Friction Research of LIGA-Microstructure: Comparison between Theory and Experiments
Application of Distributed Hydrological Model Based on Multivariant Checking for Monitoring Regional ET
Research and Experiment on Nonlinear Correction Algorithm of Metal Tube Rotameter
Negative Temperature Coefficient of PVC Filled with Carbon Black
Research on Parallel DBSCAN Algorithm Design Based on MapReduce
Research of Electrochemistry Measuring System Based on Saliva Glucose
Grid-Based Corner Detection of the Microscopic Camera Calibration
The Perceptual Study of the Tolerance of Spectral Images Based on Bootstrap Analysis
High-Speed LMS Algorithm's Design and Implementation Based on FPGA
Design of Temperature Monitoring System Based on MSP430
One Reduction Method of Telecommunications Nework Events
One Fault Diagnosis Method of Telecommunications Network
The Development of Fault Diagnosis Expert System for High Speed Construction Machinery Based on Portable Data Terminal
Design and Implementation of Turbine Flow Sensor Based on Photoelectric Detection
Comparison of the Unified Segmentation Method and the New Segmentation Method on Detection of Grey Matter and White Matter Changes in Alzheimer's Disease Based on Voxel-Based Morphometry
Measurement of Cavity Volume Based on Machine Vision
Method of Parallel System Performance Evaluation Based on Multi-Level Fuzzy Synthetic Evaluation Model
Shear Test on Mixed Slide-Zone Soils of Landslide under Different Water Content
Nanosecond Pulse Near-Field Sensing Based Non-Contact Physiological Signals Measurement
Advances in Shock Testing Facilities for Naval Shipboard Equipments
Dynamic Prediction and Measurement of Overpressure for Venting of Gas Explosion
Research and Application of Moore's Time-Varying Loudness Model
A Case Study: Low Power Design-for-Testability Features of a Multi-Core Processor Godson-T
Salt and Pepper Noise Removal Based on GA-BP Algorithm
Study on one Kind of Test Method of Simplified Side Impact Using Sled Test
Local Variance Based Color Image Quality Assessment Method
Lamb Wave-Based Damage Location Detection Method of Composite Plate
A Profiled Strip Measurement Equipment Based on Machine Vision
The Research of Oil Pipeline Leak Detection and Location Based on PVDF Piezoelectric Sensors
The Design about Gauge Visual Detection System between High Signals and Contact Net
Experiment and Numerical Simulation Study on the Viscosity Impact of Turbine Flowmeter's Performance
Research and Design of Laser Accurate Displacement Measurement System
Real-Time GPS Clock Monitoring with IGS Ultra-Rapid Products
An Image Adaptive Watermarking Algorithm Based on Ridgelet Transform and Two-Dimensional Fuzzy Partition
Based on Wavelet Transform and Fuzzy Algorithm of Coal Storage Image Edge Detection Algorithm
Test and Analyze on Thermal Balance of Evaporation Process in Alumina Refinery
Positron Emission Tomography (PET) for Flow Measurement
Research of New Certain Metrics of Network Invulnerability
Implement a Low Noise Portable ECG Circuit
Temperature Measurement with High Accuracy
Storage on Map Database Based on Dynamic Base State Model with Amendment
Chapter 3: Mechanical, Electronic and Material Engineering
Electrocatalytic Oxidation of Hydroxylamine at Electro-Polymerized Poly(cobalt(II) tetraaminophthalocyanine)/Multi Walled Carbon Nanotubes Modified Electrode
Analysis of Maladjustment Sensitivity and Calibration Method for a Positive-Branch Confocal Unstable Resonator
Design of a Robust H Controller for a Magnetic Levitation System
A Real Time Inversion Method for Calculating Multi Laser Wavelengths' Extinction Coefficients Profile of Atmospheric Aerosol
Acoustic Emission Analysis on Low Velocity Impact Damage of 2D C/SiC Composites
CT Analysis Method for Particular Lithology Reservoir Rock
Numerical Correction High Temperature of Near-Infrared Colorimetry
A Continuous Output Feedback Finite-Time Speed Tracking Control of PMSM
An Improved Comprehensive Index Method for the Evaluation of Rock Burst Risk in Mining
Design of 183.31GHz Interferometer with Two Elements
Motor Fault Diagnosis Based on Wavelet Analysis and Fast Fourier Transform
Energy-Efficient of Non-Invasive Motor for On-Line Monitoring System Based on Reasoning Model
Research on XML Based Data Integration in PCS of Process Industry
Impact of Rough Wall Surface on Electromagnetic Wave Propagation Characteristics in Mine Tunnels
Cross-Coupling Synchronization Control of High Precision Permanent Magnet Linear Motors
Design and Implementation of Miniature 3-Axial Fiber Optic Rate Sensor
Study on the Intelligent Electric Power Monitor Based on ARM
A Multi-Scale Image Matching Recognition Algorithm Based on Phase Correlation
Experiment Equipment of Newton's Second Law Based on Photoelectric Sensor
Rotor Dynamic Balance on the Field for Cooling Fan of Engine
Study of Polyphase Decomposition Zoom-FFT Algorithm in Non-Invasive Motor Monitoring System
Analysis Methods of Power Characteristics for Hydraulic Pressing of the Traction Drive Device
The Brake Assist System of Automobile Overhaul Competence Analysis
An Innovative Electronic Current Transformer Applied in High Voltage Systems
Application of Adaptive Fuzzy-PID Control in Servo Spindle Rigid Tapping
Study Performance of Pure Electric Buses Based on the Fuzzy Control Strategy
Research on Two-Position North-Seeking Method Based on the Single Axis FOG
Research on Transverse Sensitivity Property of Cymbal Piezoelectric Vibration Acceleration Sensor
Research on Brushless DC Motor Speed Control System Based on Passivity-Based Control
An Integrated Measurement Platform for Piezoelectric Transformer Based on Virtual Instruments
A Study on Pore Diameter Distribution of Saliniferous Dredger Fill Consolidated by Vacuum Preloading
Theoretical and Numerical Analysis of Waste Heat Utilization Device for Coal Gangue Brick Tunnel Kiln
A Novelty Control Strategy for the Photovoltaic Supercapacitor and Battery Hybrids Storage System
Research and Design on Intelligent Outdoor Solar Charging Station
Film Shape Research of Slipper Bearing in Axial Piston Pump Based on Genetic Algorithms
Effect of Manufacturing Condition on Forming a Screw-Threaded Stainless Fuel Filler Tube
Auto-Read Photoelectric Autocollimator Based on DSP and Area Array Imaging Sensors
Study on the Compensation for Mounting Eccentric Errors of Circular Grating Angle Sensors
Experiment Study on Decreasing Blasting Vibration Adopting Large Diameter Hole-by-Hole Initiation
Fault Diagnosis of Wet-Shift Clutch Based on STFT and Wavelet
Research Progress on Application of Magnetic Suspension Balance in Basic Physical Properties Measurement
A Method for Detecting Deformation of Pipeline Based on Distributed Fiber Optic Strain Sensor
The Meteorological Information Applies Optimization of Research in the SCIPUFF Nuclear Proliferation Analogous System
Research on Measurement Technology of Impulse Current Based on Hall Sensor
A Rapid Way to Build Prototypes of Wireless Sensor Network Based on Virtual Instruments Technology
The Mechanical Properties Study of Woven Fabrics
Approach of Automatic Measuring Minimum Distance between Profiles at Cutting Area for Rough Milling
Algorithm of Obtaining Maximum Diameter of Ball Mill Using in Semi-Finish Milling for Complex Mold
Experimental Study of Gasoline Flame Propagation Characteristic
The Research of Vibrator Wireless Monitoring System Based on Compressive Sensing
Experimental Study on Effect of Pulley Diameter and Lubricant Grease on Multi-Layer Winding Wire Rope's Fatigue Endurance
Research on the Calibration of Uniaxial Rotary SINS
A New ESP Design and Development Guideline Based on the System Vehicle-Driver-Environment
Design of High Precision Sunlight Intensity Measurement Device
Analyses of Electromagnetism Guided Waves in Metal Pipe by Using of Multi-Scale Entropy
Evaluation of Taste Quality in Green Tea Infusion Using Electronic Tongue Combined with LS-SVM
The Effect of Seawater Salinity on the Equilibrium Time of Oxidation Reduction Potential
Electro-Mechanically Integrated Circuit Models for DC Motor Driven Systems
System Modeling and Fuzzy Control of a Thin-Disc Type Piezoelectric Actuator
Verifying and Simulating of the Novel Analytical Method of the Steady-State Error for Nonunity Feedback Control Systems
Implementing Iterative Learning Control to Reduce Torque Ripple of Permanent Magnet Synchronous Machine
Feature Extraction in the Image Recognition for Plateau Pikas (Ochotona curzoniae)
Whole-Circuit Models for the BDCM/LBDCM Driven Electro-Mechanical Systems
The Electromagnetic Field Analysis of Permanent Magnet Synchronous Generator Based on ANSYS
A New Model of Bundle Adjustment Used in Camera Calibration
Quantum Three-Qubit Phase Gate Operation by Using an Artificial Atom in a Three-Mode Cavity
A Super-Stable Optical Interferometer with Multi-Pass and its Simple Application
The Isolator of Industrial Automatic Control System Selection and Application
Key Technologies in Image Processing of Interferogram
Double Loop Autopilot Design Based on Frequency Domain
Automatic Calibration of Clamp-On Ultrasonic Flowmeter Based on Fieldbus Control System
Wind Tunnel Test on Icing on a Straight Blade for Vertical Axis Wind Turbine
Research on Harmonic Detection Methods of Electrified Railway
Design and Finite Element Analysis of Airborne Cloud Liquid Water Sensors
Guidance Law Design for Space-Based Anti-Missile Boost Phase Intercept
The Design and Implementation of Three-Phase SPWM Based on DSP
Research on Intelligentized Recognition Technology for Double Wavelength Laser Measurement of Thin Film Thickness
Design and Realization of Communication System Based on Power Line Carrier
Quantitative Relationship of Electro-Optic Characteristics in AC Corona Discharge under Different Voltage and Humidity
Noise Analysis for Simple Lidar Detecting Wake Profiles Based on Bubble Laser Backscattering at 180 Degrees
Calibration of an Industry Robot and External Axle Based on Ant Colony Optimization
Forecasting EGR Rate of Diesel Engine Based on Neural Syncretic Theory
Simulation to Compensate Ripple of Air Bearing Stage with Flexure Hinge Mechanisms
by "Nielsen BookData"