Advanced measurement and test : selected, peer reviewed papers from the 2011 2nd International Conference on Advanced Measurement and Test (AMT 2011), June 24-26, 2011, Nanchang, China

Author(s)

• International Conference on Advanced Measurement and Test
• Esa, Riza
• Wu, Yanwen

Bibliographic Information

Advanced measurement and test : selected, peer reviewed papers from the 2011 2nd International Conference on Advanced Measurement and Test (AMT 2011), June 24-26, 2011, Nanchang, China

edited by Riza Esa and Yanwen Wu

（Advanced materials research, v. 301-303）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2
• Part 3

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). This second collection on "Advanced Measurement and Test II" is dedicated to the electronic testing of devices, boards and systems; covering the complete cycle from design verification, design-for-testing, design-for-manufacturing, silicon de-bugging, manufacturing testing, system testing, diagnosis, failure analysis ... and back to process and design improvement. This will be an invaluable guide to the topics.

Table of Contents

Preface, Organizing Committee Chapter 1: Material Science and Technology Synthesis of PEG200 Lauric Acid Diester and the Performance Test of Viscosity Synthesis and Imidization of Polyamic Acid Electrochemical Property of Terbium Doped Tantalum Oxide Film Electrode Effect of Different Precursor and Carbon Fibre Content on Unidirectional C/C Composites Interlaminar Bonding Strength A Dissertation on Polysiloxane-Antifoaming-Agents: Antifoaming Principles, Synthesis and Compound Studies on Ceramics Technique Influences of the Compatibility between the Polymer and Solvent on Ordered Microporous Structure Formation by Water Droplets Templating An Image Analysis Method for Studing Yarn Cross-Sectional Structure A Novel Photonic Crystal Fiber with Two Rings of Hybrid Elliptical Air-Holes for Single-Polarization Single-Mode Operation A Single-Polarization Single-Mode Photonic Crystal Fiber with Four Lines of Small Elliptical Air-Holes Study on Al-Doped ZnO Nanofibers Prepared by Electro-Spinning Technique Research on On-Line Detection Technology for Yarn Evenness Research on Polyvinylidene Fluoride Hollow Fiber Hemodialyzers Material Classification Using Random Forest Molecular Dynamics Deformation Simulation of Carbon Nanotube Probes Simulation of Temperature and Stress Field of Titanium Alloys under Laser Cladding The Thermal Conductivity Simulation Calculation of Polyacryonitrile-Based Carbon Fiber/Pitch-Based Carbon/Carbon Composites The Real-Time Detecting Application of CNTs in 3D Braided Composite Material Structures and Properties of Modification Copolyester Fiber Synthesis, Characterization and Anticorrosion Performance of Modified TiO2 as Inhibitor Optimized Simulation for GaN Growth in Vertical HVPE Reactor A Novel High Efficiency Solution of High Power LED Lighting Path Planning of the Robot for Aero-Engine Turbine Blades Maintenance Study and Implementation of Expendable Current Profiler Measurement State Characteristic Parameters Extraction Method of Wind Turbine Blades Based on the Length Fractal Dimension The Design of the Detection and Localization of the Color Image for the Location of Road Traffic Signs The Finite Element Analysis in Measurement System of Airplane Fuel Mass The Motion Control of Clothes Model Robot and Measurement of Clothes Energy Consumption Quality Detection and Specie Identification of Apples Based on Multi-Spectral Imaging Study on the Factors Influencing Spreading Resistance of Heat Sinks Theory Study on Structure Property of N-Ethyl Morpholinium Ionic Liquid of Different Alkyl Length The Radial Velocity Measurement and Error Analysis for Low Resolution Spectra SHSD Demodulator of Interferometric Integrated Optical Acceserometer Based on SOPC A Novel Faint Signal Processing Method for Sensitivity Improvement of Pump/Probe-Based LG/LD SAW Spectroscopy System Fluorescent DNA Biosensors on Silica Microspheres Automatic Detection of Illuminant Reflection in Indoor Vision-Based Navigation Research on the Utilization of AR Coating to Improve the LED Luminous Efficiency Electrochemical DNA Biosensor for the Detection of Short DNA Species by Using Compound Co(phen)32+ The Low Beam Light Optical Configuration of High Brightness LED Headlamp Secondary Optical Design of LED Road Lights Fabric Defect Detection Method Based on Gabor Filters Isobaric Vapor Liquid Equilibrium (VLE) Data of the Systems Ethylene Glycol-Glycerol and 1,2-Propylene Glycol-Ethylene Glycol at 20Pa The Content Determination of Strongly Acidic Alkyl Phosphate with the Method of Potentiometric Titration Improvement of Gaussian Random Measurement Matrices in Compressed Sensing Partition Slub Yarn into Slub Parts and Base Parts Design of Antenna with a Solar Cell as a Parasitic Element in the UHF RFID Tag Quantum Chemical Calculation on 1H NMR Chemical Shifts of PMMA/PVPh Blends Application of Coordinate Measuring Machine in Reverse Engineering The Design of Large Image Scan Using Phototransistor Array Study on Biodegradation of Corn Straw Laser Surface Strengthening on Module Steel Semi-Continuous Reactive Batch Distillation for Production of Methyl Formate Study on Luminance Uniformity Correction for the LED Flat Panel Display Using Perturbation FEM Compute the IC Interconnect Parasitic Capacitances Considering Process Variation Mercerizing Lye Concentration Online Measurement and Control Fractal Prediction Model of Friction Coefficient in Dry Friction Pair Combustion Kinetics of Pellets Made by Sewage Sludge, Pulverized Fuel Ash and River Sludge Pattern Recognition of the Steel Rod Based on Artificial Neural Network and SVM Efficient Terahertz Surface-Emitted Difference Frequency Generation in Periodically-Inverted GaAs Crystals Experimental Study on Strength Characteristics of Cement-Soil under Fixed Spherical Pressure Condition Effect of Voids on Moisture Absorption of CFRP Laminates in Hygrothermal Environment Cloning, Expression and Characterization of -Glucosidase from L. Delbrueckii Subsp. Delbrueckii in Escherichia coli Finite Element Numerical Simulation of Two-Dimensional Ground Water Solute Migration Question A Case Study on Energy Saving and New Energy Services 2-(2'- Chloro Phenyl)- 5- (2'-Hydroxyl Phenyl)-1,3,4-Oxadiazole as a Florescent Probe for DNA Determination The State-of-the-Art Surveys for Application of Metal Magnetic Memory Testing in Remanufacturing Research of Water Heater Automatic System The Energy Saving Effect Evaluation for Outside Wall with Different Material in Island District Using Fuzzy Rough Concept Lattices Merging and Presenting Domain Ontology 3D Surface Acquisition and Reconstruction for Assessing the Extent of Strain Ratcheting and Wrinkling in Steel Tubulars New Technologies for Submillimeter Laser Ranging Photonic Logic Gate Design Based on Frequency-Sensitive Optical Response of an EIT Photonic Crystal Research in the Workflow Engine Based on Micro Kernel Strain Performance of Fiber Bragg Grating Sensor Fixed by Different Adhesives Advances on the Extraction and Separation Technologies in Tea Aroma Components Research Measurement of Wall Thinning through Insulation with Ferromagnetic Cladding Using Pulsed Eddy Current Testing Design and Test of Magnetorheological Damper with Embedded Controller Model Reference Adaptive Control for Magnetorheological Damper Subjected to High Impact Load Removing Direct Wave of Through-Wall Radar Based on Singular Value Decomposition AE Signal Analysis of Carbon Fiber Reinforced Composites Based on Hilbert-Huang Transform Material Flow Estimation of Deep-Drawn Product by Using Finite-Element Simulation Numerical Simulation for Relationship between Vortex Evolution and Diffusion of Aerosol in Human Mouth-Throat Model Research of Anticorrosion in Desulfurization Flue Design of Software and Hardware Based on JRB230240B LCD Evaluation and Classification of Black Soil Structure Degradation in Jilin by Factor Analysis and Dynamic Clustering Analysis Numerical Analysis of Effect of the Number of Nozzles on Water Mist Flow Field for Gas Explosion Suppression Microscopic Displacement Mechanism of Surfactant/Polymer Driving Residual Oil in Conglomerate Reservoir The Three-Dimensional DEM Modeling of Gravel Materials Recent Development in Friction Test Methods and Apparatus of Polymer Composites Research and Practice of New Gas Sensors Based Materials on Internet of Things Research and Development of Thin Film Gas Sensor and its GPRS Wireless Sensor Based on Internet of Things Estimation of Thickness of the Sediments in a Circular Pipe by Finite Element Method Principle and Method for Oxidation Layer Measurement in Electrolytic In-Process Dressing (ELID) Grinding Study on CA-Based Quality Prediction Model of Internal Cracks in Continuous Casting Billet The Research of the Improvement of Iris Location of the Sobel Algorithm Effects of Soil Compaction to its Shear Property 3D Model Based Machining Process Planning Chapter 2: Measuring and Testing Technique Camping Performance Experiment of Gas Thrust Bearing with Elastic Pressure Equalizing Groove Study on Bonding Wire Breakage Detection Using Diffraction of Light Monitoring Data Analysis of Dalian Subway Tunnel and Inversion of Rock Parameters Displacement Back Analysis Based on Return Mapping Algorithm and Differential Evolution Algorithm Determination of Cadmium in Bivalve Molluscs by Microwave Digestion with Inductively Coupled Plasma-Mass Spectrometry Analysis and Experimental Study on the Characteristics of Leakage of Rotary Seal Using Sealing Ring Overpressure Measurement on the Thermal Explosion of Shell Charge Research on Laser Measuring Instrument for Tunnel Surface Relative Thermal Contrast Analysis in the Inspection of Wind Turbine Blades Using Pulsed Thermography A Non-Destructive Testing Based on Electromagnetic Measurements and Neural Networks for the Inspection of Concrete Structures Imaging and Testing of Ultrasonic Sh Guided Waves in Plate with Lap Welding Structure Thermal Characteristics Simulation of the Commissioning Process for New Buried Heated Oil Pipelines Measurement System for Non-Cylinder Pin Hole of Piston Young's Modulus Detection for Ultra-Thin Film by LSAWs Technique with Wavelet and FIR Filter De-Noising Modal Parameter Validation in Coupled Vibro-Acoustical System Research on the Quantitative Analysis of Subsurface Defects for Nondestructive Testing by Ultrasound Lock-In Thermography Land Subsidence Detection by PSInSARTM Based on TerraSAR-X Images Research on High-Accuracy Low-Power Ultrasonic Flow Measurement and Instrument Transient Analysis of Plane Wave Reflection from a Lorentz Half Space A Watermarking Algorithm for Relational Database Based on Image Mechanism Analysis of Induction-Type Coil Target for Velocity Measurement Research of Measurement Method of Two Dimensional Configuration Drag Test in Wind Tunnel in Case of High Lift An Improved Incremental Training Algorithm of Support Vector Machines A Joint ICI Mitigation Method Based on Decision Feedback and Pilot Tracking Mining Successful Weight Loss after Bariatric Surgery by Using Multivariate Adaptive Regression Splines Risk Management of Electric Energy Consumption in Industrial A Novel Elman Algorithm Based on Sectional Least Squares A Cost Function-Oriented Quantitative Evaluation Method for Unmanned Ground Vehicles Based on Biped Robot Walking in Horizontal Surface Research of Dynamic Simulation Surface Accuracy Measurement of a Novel Inflatable Antenna by Photogrammetry Processing of Sonar Image Based on Compressive Sensing Groundwater Vulnerability Assessment System Based on GIS The Application of Kalman Filter in Optical Measurement of Benzene An Improved Blind Multiuser Detector Algorithm Based on Subspace Tracking Research and Development the Method of Transformer Winding Deformation Fault Diagnosis Based on FRA Real-Time Detection of the Repose Angle of Solids in Rotating Drum Based on Image Processing Measuring the Phthalates of Xiangjiang River Using Liquid-Liquid Extraction Gas Chromatography Statistic Analysis of Examination Results and Examination Design Quality Empirical Tests of Scale-Free Geometry in NASA DATA Loading Priority Evaluation Based on PRISM Classifier Optimal Placement of Phasor Measurement Units Based on Information Entropy Property Evaluation Experimental Study of Static Aerodynamic Coefficients of Bridge Section Analogy Analysis about Shape Coefficient of the Abnormal Roofing Structure with the Standard Transverse Vibration Measurement and Analysis of a Three-Point Supported Dual-Span Rotor System with Angle Misaligned Flexible Coupling Adaptive Edge Detection Method for Image Polluted Using Canny Operator and Otsu Threshold Selection Model Research on the Evaluation of Traffic Sustainable Development Western Region County-Level Highway Fuzzy Comprehensive Evaluation Research Application of LabVIEW in Emulation Study on Time-to-Count Measuring System A Method to Improve the Accuracy of Adjustable Phase Difference of Signal Generator Optimizing the Design Parameters of Spherical-Cymbal Transducer Based on Comprehensive Point-Rating Method The ERP Detection of Mental Arithmetic Strategies Research on Corrugated Diaphragm Sensing Technique Detecting the Pressure outside the Casing Numerical Simulation of the Double-Cones Flow-Meter on its Expansibility Factor A Survey of Image Edge Detection Based on Grey Theory Image Matching Based on Bacterial Foraging Algorithm The Research of Pedestrian Platoon Multiple Events at Signalized Intersection Determination of Surface Acoustic Admittances by Inverse Solution of Finite Element Modeling in the Pipes Sensor Compensation Based on Adaptive Ant Colony Neural Networks The Propagation Properties of the Vector Dark Soliton Measurement and Analysis of the Chinese Elite Male Swimmers' Basal Metabolism of Nicotinamide Using NMR-Based Metabonomic Technique An All-Around Measurement and Evaluation of the Chinese Elite Youth Canoeists' Physical Characteristics Using Factor Analysis Model Research on the Detection of Faulty Insulator Strings Microwave Power Real-Time Soft-Measuring Based on Improved BP Neural Network Surface Shape Measurement Using Extended Photometric Stereo Research on Testability Evaluation Method of Complex Equipment Based on Test Data in Development Phase The High-Speed Ultrasonic Testing Method for Steel Pipes Based on Linear Reciprocating Probes Quantitative and Comprehensive Evaluation of Qualitative Indices in Dam Safety Monitoring Initial Design of FAST Engineering Surveying Control Network Experimental Research on Transition and Flow Separation of Laminar Airfoil The Slipping Shoe Motion Trajectory Analysis and Simulation of Spherical Swashplate Type Axial Piston Pump Integrated Application of Three In Situ Stress Measurement Techniques Study on a Method to Measure Welding Arc Plasma Axis Temperature at Fixed Point Implementation for High-Precision and Non-Contact System for the Measurement of Crankshaft and Camshaft Acoustic Method of Detection of Optical Thin Films Damage Virtual Instrument-Based Cable and Harness Test System Hardware Design and Development Lab Windows/CVI Platform-Based Cable and Harness Test System Software Design Measurement of Flame Height by Image Processing Method A SAT-Based Pattern Generation Method for Diagnosis Multiple Scan Chain Faults A Vernier Delay Line for Time Interval Measurement Research of a Measuring System for UV Absolute Spectral Response Based on ECPR FPN Analysis and Processing of the Science Grade CCD Alta U9000 Design and Development of Crude Oil Security System Based on Photoelectric Beam Detector Application of Data Protection in Motor Test and Control System Novel Measurement Method of Small Phase with Interference Phase Contrast The Design of Automatic Detection and Classification System for Recycled Drill Pipe Analysis and Evaluation of InSAR Phase Unwrapping Approaches Precision Analysis of Gravity Vertical Gradient Measurement Based on CG - 5 Relative Gravimeter Study on Sub-Pixel Techniques for Accurate Image Measurement of Displacement Research and Implement the Image Retrieval Method Based on the Shape Feature A Wireless Pulse Signal Acquisition System for Status Monitoring of Ship Navigators Study on Texture Features of Cingulum in Different Gender Patients with Alzheimer's Disease and Mild Cognitive Impairment Based on MR Images Work Piece Length Measure System Based on Image A Novel Method for Online Measuring the Short-Circuit Impedance of Distribution Transformers Measurement of Laser Ablation Micro Impulse Using the Torsion Pendulum Interferometry The Measurement Correction of MEMS Gyroscope Based Interlaced Kalman Filtering Conflict-Driven Learning in Test Pattern Generation Measurement of the Ratio of Tea Polyphenols to Amino Acids in Green Tea Infusion Based on near Infrared Spectroscopy 3D Groundwater Modelling Using Well Drilling Data in Tanggu, China Direct Phase Detection Utilizing Phase Contrast Imaging Static Friction Research of LIGA-Microstructure: Comparison between Theory and Experiments Application of Distributed Hydrological Model Based on Multivariant Checking for Monitoring Regional ET Research and Experiment on Nonlinear Correction Algorithm of Metal Tube Rotameter Negative Temperature Coefficient of PVC Filled with Carbon Black Research on Parallel DBSCAN Algorithm Design Based on MapReduce Research of Electrochemistry Measuring System Based on Saliva Glucose Grid-Based Corner Detection of the Microscopic Camera Calibration The Perceptual Study of the Tolerance of Spectral Images Based on Bootstrap Analysis High-Speed LMS Algorithm's Design and Implementation Based on FPGA Design of Temperature Monitoring System Based on MSP430 One Reduction Method of Telecommunications Nework Events One Fault Diagnosis Method of Telecommunications Network The Development of Fault Diagnosis Expert System for High Speed Construction Machinery Based on Portable Data Terminal Design and Implementation of Turbine Flow Sensor Based on Photoelectric Detection Comparison of the Unified Segmentation Method and the New Segmentation Method on Detection of Grey Matter and White Matter Changes in Alzheimer's Disease Based on Voxel-Based Morphometry Measurement of Cavity Volume Based on Machine Vision Method of Parallel System Performance Evaluation Based on Multi-Level Fuzzy Synthetic Evaluation Model Shear Test on Mixed Slide-Zone Soils of Landslide under Different Water Content Nanosecond Pulse Near-Field Sensing Based Non-Contact Physiological Signals Measurement Advances in Shock Testing Facilities for Naval Shipboard Equipments Dynamic Prediction and Measurement of Overpressure for Venting of Gas Explosion Research and Application of Moore's Time-Varying Loudness Model A Case Study: Low Power Design-for-Testability Features of a Multi-Core Processor Godson-T Salt and Pepper Noise Removal Based on GA-BP Algorithm Study on one Kind of Test Method of Simplified Side Impact Using Sled Test Local Variance Based Color Image Quality Assessment Method Lamb Wave-Based Damage Location Detection Method of Composite Plate A Profiled Strip Measurement Equipment Based on Machine Vision The Research of Oil Pipeline Leak Detection and Location Based on PVDF Piezoelectric Sensors The Design about Gauge Visual Detection System between High Signals and Contact Net Experiment and Numerical Simulation Study on the Viscosity Impact of Turbine Flowmeter's Performance Research and Design of Laser Accurate Displacement Measurement System Real-Time GPS Clock Monitoring with IGS Ultra-Rapid Products An Image Adaptive Watermarking Algorithm Based on Ridgelet Transform and Two-Dimensional Fuzzy Partition Based on Wavelet Transform and Fuzzy Algorithm of Coal Storage Image Edge Detection Algorithm Test and Analyze on Thermal Balance of Evaporation Process in Alumina Refinery Positron Emission Tomography (PET) for Flow Measurement Research of New Certain Metrics of Network Invulnerability Implement a Low Noise Portable ECG Circuit Temperature Measurement with High Accuracy Storage on Map Database Based on Dynamic Base State Model with Amendment Chapter 3: Mechanical, Electronic and Material Engineering Electrocatalytic Oxidation of Hydroxylamine at Electro-Polymerized Poly(cobalt(II) tetraaminophthalocyanine)/Multi Walled Carbon Nanotubes Modified Electrode Analysis of Maladjustment Sensitivity and Calibration Method for a Positive-Branch Confocal Unstable Resonator Design of a Robust H Controller for a Magnetic Levitation System A Real Time Inversion Method for Calculating Multi Laser Wavelengths' Extinction Coefficients Profile of Atmospheric Aerosol Acoustic Emission Analysis on Low Velocity Impact Damage of 2D C/SiC Composites CT Analysis Method for Particular Lithology Reservoir Rock Numerical Correction High Temperature of Near-Infrared Colorimetry A Continuous Output Feedback Finite-Time Speed Tracking Control of PMSM An Improved Comprehensive Index Method for the Evaluation of Rock Burst Risk in Mining Design of 183.31GHz Interferometer with Two Elements Motor Fault Diagnosis Based on Wavelet Analysis and Fast Fourier Transform Energy-Efficient of Non-Invasive Motor for On-Line Monitoring System Based on Reasoning Model Research on XML Based Data Integration in PCS of Process Industry Impact of Rough Wall Surface on Electromagnetic Wave Propagation Characteristics in Mine Tunnels Cross-Coupling Synchronization Control of High Precision Permanent Magnet Linear Motors Design and Implementation of Miniature 3-Axial Fiber Optic Rate Sensor Study on the Intelligent Electric Power Monitor Based on ARM A Multi-Scale Image Matching Recognition Algorithm Based on Phase Correlation Experiment Equipment of Newton's Second Law Based on Photoelectric Sensor Rotor Dynamic Balance on the Field for Cooling Fan of Engine Study of Polyphase Decomposition Zoom-FFT Algorithm in Non-Invasive Motor Monitoring System Analysis Methods of Power Characteristics for Hydraulic Pressing of the Traction Drive Device The Brake Assist System of Automobile Overhaul Competence Analysis An Innovative Electronic Current Transformer Applied in High Voltage Systems Application of Adaptive Fuzzy-PID Control in Servo Spindle Rigid Tapping Study Performance of Pure Electric Buses Based on the Fuzzy Control Strategy Research on Two-Position North-Seeking Method Based on the Single Axis FOG Research on Transverse Sensitivity Property of Cymbal Piezoelectric Vibration Acceleration Sensor Research on Brushless DC Motor Speed Control System Based on Passivity-Based Control An Integrated Measurement Platform for Piezoelectric Transformer Based on Virtual Instruments A Study on Pore Diameter Distribution of Saliniferous Dredger Fill Consolidated by Vacuum Preloading Theoretical and Numerical Analysis of Waste Heat Utilization Device for Coal Gangue Brick Tunnel Kiln A Novelty Control Strategy for the Photovoltaic Supercapacitor and Battery Hybrids Storage System Research and Design on Intelligent Outdoor Solar Charging Station Film Shape Research of Slipper Bearing in Axial Piston Pump Based on Genetic Algorithms Effect of Manufacturing Condition on Forming a Screw-Threaded Stainless Fuel Filler Tube Auto-Read Photoelectric Autocollimator Based on DSP and Area Array Imaging Sensors Study on the Compensation for Mounting Eccentric Errors of Circular Grating Angle Sensors Experiment Study on Decreasing Blasting Vibration Adopting Large Diameter Hole-by-Hole Initiation Fault Diagnosis of Wet-Shift Clutch Based on STFT and Wavelet Research Progress on Application of Magnetic Suspension Balance in Basic Physical Properties Measurement A Method for Detecting Deformation of Pipeline Based on Distributed Fiber Optic Strain Sensor The Meteorological Information Applies Optimization of Research in the SCIPUFF Nuclear Proliferation Analogous System Research on Measurement Technology of Impulse Current Based on Hall Sensor A Rapid Way to Build Prototypes of Wireless Sensor Network Based on Virtual Instruments Technology The Mechanical Properties Study of Woven Fabrics Approach of Automatic Measuring Minimum Distance between Profiles at Cutting Area for Rough Milling Algorithm of Obtaining Maximum Diameter of Ball Mill Using in Semi-Finish Milling for Complex Mold Experimental Study of Gasoline Flame Propagation Characteristic The Research of Vibrator Wireless Monitoring System Based on Compressive Sensing Experimental Study on Effect of Pulley Diameter and Lubricant Grease on Multi-Layer Winding Wire Rope's Fatigue Endurance Research on the Calibration of Uniaxial Rotary SINS A New ESP Design and Development Guideline Based on the System Vehicle-Driver-Environment Design of High Precision Sunlight Intensity Measurement Device Analyses of Electromagnetism Guided Waves in Metal Pipe by Using of Multi-Scale Entropy Evaluation of Taste Quality in Green Tea Infusion Using Electronic Tongue Combined with LS-SVM The Effect of Seawater Salinity on the Equilibrium Time of Oxidation Reduction Potential Electro-Mechanically Integrated Circuit Models for DC Motor Driven Systems System Modeling and Fuzzy Control of a Thin-Disc Type Piezoelectric Actuator Verifying and Simulating of the Novel Analytical Method of the Steady-State Error for Nonunity Feedback Control Systems Implementing Iterative Learning Control to Reduce Torque Ripple of Permanent Magnet Synchronous Machine Feature Extraction in the Image Recognition for Plateau Pikas (Ochotona curzoniae) Whole-Circuit Models for the BDCM/LBDCM Driven Electro-Mechanical Systems The Electromagnetic Field Analysis of Permanent Magnet Synchronous Generator Based on ANSYS A New Model of Bundle Adjustment Used in Camera Calibration Quantum Three-Qubit Phase Gate Operation by Using an Artificial Atom in a Three-Mode Cavity A Super-Stable Optical Interferometer with Multi-Pass and its Simple Application The Isolator of Industrial Automatic Control System Selection and Application Key Technologies in Image Processing of Interferogram Double Loop Autopilot Design Based on Frequency Domain Automatic Calibration of Clamp-On Ultrasonic Flowmeter Based on Fieldbus Control System Wind Tunnel Test on Icing on a Straight Blade for Vertical Axis Wind Turbine Research on Harmonic Detection Methods of Electrified Railway Design and Finite Element Analysis of Airborne Cloud Liquid Water Sensors Guidance Law Design for Space-Based Anti-Missile Boost Phase Intercept The Design and Implementation of Three-Phase SPWM Based on DSP Research on Intelligentized Recognition Technology for Double Wavelength Laser Measurement of Thin Film Thickness Design and Realization of Communication System Based on Power Line Carrier Quantitative Relationship of Electro-Optic Characteristics in AC Corona Discharge under Different Voltage and Humidity Noise Analysis for Simple Lidar Detecting Wake Profiles Based on Bubble Laser Backscattering at 180 Degrees Calibration of an Industry Robot and External Axle Based on Ant Colony Optimization Forecasting EGR Rate of Diesel Engine Based on Neural Syncretic Theory Simulation to Compensate Ripple of Air Bearing Stage with Flexure Hinge Mechanisms

by "Nielsen BookData"

Details

• NCID: BB07198494
• ISBN:
  • 9783037851975
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 3 v.
• Size: 25 cm
• Parent Bibliography ID:
  • BA24926058