Emerging focus on advanced materials : selected, peer reviewed papers from the 1st International Congress on Advanced Materials 2011 (AM2011) May 13-16, 2011, Jinan, P.R. China
Author(s)
Bibliographic Information
Emerging focus on advanced materials : selected, peer reviewed papers from the 1st International Congress on Advanced Materials 2011 (AM2011) May 13-16, 2011, Jinan, P.R. China
（Advanced materials research, v. 306-307）
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
Available at 1 libraries
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
This special collection of papers covers fields including: Biomaterials and Tissues, Energy-Harvesting Materials and Energy-Transfer Materials, Optical and Electronic Materials, Superconductive and Magnetic Materials, Structural Materials, Polymer Materials, Composite Materials, Constructional Materials, Nanomaterials, Environmental and Green Materials. These selected articles focus on the latest developments in advanced materials. The proceedings will provide materials scientists and engineers with a comprehensive overview of the preparation, characterization, performance and application of materials.
Table of Contents
Preface and Committees
Chapter 1: Biomaterials and Tissues
Grafting Biomimetic Phospholipid Zwitterionic Brushes onto Polycarbonateurethane for Improving Hemocompatibility
Dynamic Cell Patterning Technology Based on Photocleavable Molecules
Conductometric Study of the Effect of Citric Acid on Phase Evolution of Calcium Phosphate in Solutions
SiO2 Beads with Quantum Dots: Synthesis and Bioapplication
Measurement of Glucose Concentration in Cancer Cell by Catalyzed-Enzyme Reaction
Preparation and the Blood Compatibility of Titanium Oxide Nanorod Arrays
Advances in Biosensor Application for Environmental Monitoring
Preparation of PVA/PEG Phase Change Composite Nanofibers by Electrospinning
Study on Preparation and Sensitive Properties of Polyethylene Glycol (PEG) / Polyvinyl Alcohol (PVA) Thermo-Sensitive Hydrogel
The Magnetism of DNA Molecular Materials
Thermal and Thermo-Oxidative Degradations of Deproteinized Natural Rubber and Natural Rubber
Fabrication of Shortened Electrospun Fibers with Concentrated Polymer Brush Toward Biomaterial Applications
Biomimetic Synthesis of Fluorapatite Coating
Reinforcement of Hydroxyapatite with Multi-Walled Carbon Nanotubes
Shape-Memory NiTi Foam Synthesized by CIP and Sintering with NaCl Space-Holders
Synthesis of Chemical Responsive Chitosan-Grafted-Polyaniline Bio-Composite
Study on the Microbial Hydrolysis of Maize Straw and the Water Reducing Properties of the Hydrolysate
Chapter 2: Energy Harvesting Materials and Energy-Transfer Materials
Isothermal Oxidation Behavior of the AISI430 Stainless Steel at High Temperature in Static Air
Rheological Behavior of Semisolid Al-6.5wt%Si Alloy at Transient State
Rheological Behavior of Semisolid Al-6.5wt%Si Alloy under Cyclic Shear Deformation
Self-Assembly Proton Exchange Membranes for Direct Methanol Fuel Cell with Size-Controlled Au Nanoparticles
Preparation and Photovoltaic Properties of Flexible Dye-Sensitized Solar Cells
Texture and Ductility of Ni3Al Foils
Research on Optimization Design of Shearer Sliding Shoes by Plasma Cladding Cr28MnV
Fabrication of Anti-Reflective Coatings on Solar Collector Tubes
Catalytic Properties of Ni3Al Foils for Hydrogen Production
Facile Preparation of NiO/Ni Nanocomposite and its Electrochemical Capacitive Behaviors
Characterization of AB5-Type Metal Hydride Modified by Electroless Plating Nickel in Forming Process
Combustion Characteristics of Biomass and its Cellulose
The Synthesis of New Rhodanine Ramification and Application in Determine Trace Bismuth
Optimization for the Formation of Metal Hydride Electrode Used in Ni/MH Batteries
Preparation and Electrochemical Properties of Pt/Mesoporous-C for Oxygen Reduction Reaction: Effect of Carbonation Temperature
Growth and Photovoltaic Performance of Single-Crystal TiO2 Nanorod Array Directly on Transparent Conducting Substrates
Chapter 3: Optical and Electronic Materials
Synchrotron Radiation X-Ray Absorption and Optical Studies of Cubic SiC Films Grown on Si by Chemical Vapor Deposition
Luminescence in Rare Earth Activated AlPO4 Phosphor
Synthesis and Photoluminescence of Cr-Doped Rod-Like ZnO Particles by Hydrothermal Method
Silicon Microfabrication Processes Including Anodic Bonding of Extremely Thin (60 m -Thick) Silicon on Glass
Characteristics of Gamma-Ray Irradiated Pentacene Organic Thin Film Field Effect Transistors
Fabrication of Condenser Microphones on Silicon on Insulator Wafer
Influence of the Quality of AlN Buffer Layer on the Quality of GaN Epitaxial Layer on Silicon Substrate
Two Novel Tetrahedrally Silicon-Based Benzimidazole Derivatives: Potentials as Blue Emitters for OLEDs
Study on Hydrothermal Synthesis of LaPO4:Eu3+ Materials
Synthesis of Main-Chain Polyimides Containing Azoaryl and their Third-Order NLO Properties
Preparation and Properties of Oxidized Coal/Polyaniline Composite Material
Synthesis, Crystal Structure and Photoluminescence of Eu(Phen)(DMF)2(NO3)3 (Phen = Phenanthroline and DMF = N,N-Dimethylformamide)
Synthesis, Characterization and Luminescence of Europium, Terbium Complexes of 1,1'-(Pyridin-2,6-Diyl) Bis-3-P-Tolylpropane-1,3-Dione
Comparison between Vanadium Dioxides Produced by Ammonium Metavanadate and Vanadium Pentoxide
Electron Stimulated Surface Chemical Reaction Mechanism for Phosphor Degradation
Synthesis and Liquid Crystal Properties of a New Organometallic Palladium Complex
Growth of p-Type AlN Crystals by C and Si Codoping
Promising Zn3Ta2O8:Pr3+ Red Phosphor for Low Voltage Cathodoluminescence Applications
Optical Properties of the 3-D Composite Photonic Crystals Prepared by Modified Dip-Coating and Coating First Method
Synthesis and Properties of Poly(3,4-Ethylenedioxythiophene) via Solid-State Polymerization
Structural and Optical Properties of CdS Thin Films Grown by Sputtering
Theoretical Studies on P-Type Conduction in (S,Cu) Co-Doped ZnO
Study on Arc Ion Plating Nitride Films of Microscopic Morphology and Micro-Hardness
Studies on Donor-Acceptor Substituted with Triphenylamine-Core Fluorescent Derivatives
Study on Novel Method to Measure Luminescence Time Interval Between the Initial and Terminal of Light Emission in Frequency Domain
A Cement Based Piezoelectric Composite Sensorfor Health Monitoring of Civil Engineering Structure
Electrochemical Polymerization of N-(9-Fluorenylmethoxycarbony)-Glycine and Characterization of its Polymers
Effect of Shape Parameter on the Performance of 1-3 Piezoelectric Composites
Fabrication and Properties of 1-3 Polymer Modified Cement Based Piezoelectric Composites
High Quantum Efficiency Dependence on Structure Optimizatin for Gallium Nitride Photocathode
The Range Distribution of Nd Ions Implanted in Silicon-on-Insulator
Poly[N-(9-Fluorenylmethoxycarbonyl)-L-Phenylalanine] with Good Solubility and Good Blue Light-Emitting Properties via Electropolymerization
Electrocatalysis Property of DNA-Hydroxyapatite Modified Electrode on Chloramphenicol
Synthesis and Character of Fluorescence Reagent 3-P-Nitrylphenyl-5-(2'-Sulfonophenylazo) Rhodanine
Synthesis of Large-Area and Monolayer of Graphene: Role of Transition Metal Support and Growth Time by CVD Method
Influence of Electroless Copper Deposition on the Electrochemical Performance of Si/MCMB
Mechanical and Thermal Behaviors of the Acrylic Based Core-Shell Rubber Modified Poly(Lactic Acid)
Preparation of N-Doped TiO2/NiO Composite Electrode and its Photoelectrochemcal Characteristics
Synthesis and Fluorescence Properties of Hyperbranched Poly(Amido Amine) with New Fluorescence-Emitting Moieties
Growth and Properties of Cubic Potassium Tantalate Niobate Crystals
Synthesis, Electronic States, and Electroluminescent Properties of Aluminum Complex Based on Mixed Ligands with 8-Hydroxyquinolinate and Acetylacetone
Properties of Al Doped ZnO Thin films by DC Reaction Magnetron Sputtering
Process Research of Amorphous SiO2 for Optical Fiber Preform by Sol-Gel
Influence of Annealing Temperature on the Structure and Electrochromic Properties of NiOx Thin Films
Chapter 4: Superconductive and Magnetic Materials
Effect of Finishing Temperature on Texture Evolution and Magnetic Properties in Heavy Cold Rolled High Silicon Steel Thin Sheets
ABS Fabrics Chemically Plated by Cu/Ni-P as Electromagnetic Shielding Material
Transmission Properties of Thue-Morse Quasi-Periodic 1D Superconducting Photonic Crystals
Magneticbead-Based Enzyme-Linked Immunoassay for Detection Carcinoembryonic Antigen in Gastric Cancer Cells
Ground State and Transport Property in Superconductors with Artificial Pinning Arrays
Synthesis and Characterization of Nano-Hexaferrites SrFe12O19 by Aqueous Solution Method
Monodisperse Fe3O4/Fe Core/Shell Nanoparticles with Enhanced Magnetic Property
Preparation of TbBO3 Powder and Growth of TbBO3 Crystal
Chapter 5: Structural Materials
Dry Sliding Wear Behavior of Hot Pressed Fe-28Al and Fe-28Al-10Ti Alloys
Grain Refinement of AZ91D Magnesium Alloy by In Situ Al4C3 Particles
Dislocation Configurations in Single-Crystal Superalloys during High-Temperature Low-Stress Creep
Study on the Stability and Phase Transition of Precipitated Phases Al6Fe and Al3Fe in Al-Fe Alloy
High Energy Micro-Arc Alloying of Mg-RE on AZ31 Mg Alloy
Surface Oxygen Diffusion Hardened Titanium Material TC4
Anomalous Change of the Electrical Resistivity and the Structure of Sn Melt with Temperature
Improvement of Concrete Materials by Bacterial-Mediated Precipitation
Die Optimal Design for a Large Diameter Thin-Walled Aluminum Profile Extrusion by ALE Algorithm
High Temperature Electrochemical Synthesis of Tungsten Boride from Molten Salt
A Fast Method for Determining Physical Properties of Slags with Contact Angle
Microstructure and Mechanical Behaviors of AZ91 Magnesium Alloy with Thermal Rate Treatment Technique
Temperature Effect of Refining Performance by Al-Ti-B (C) Master Alloys
Densification Behavior and Pores Evolution of Selective Laser Sintering Parts during Post Microwave Sintering Process
Dynamic Crushing Behavior of the High-Density Closed-Cell Foams
Fatigue Characteristic and Dislocation Substructure of A356 Casting Alloy under Multi-Axial Cyclic Loadings
Influence of the Parameters on the Laser Deposited TiAl Layer
Effect of Heat Treatment on Thixoformed AM60B Alloy
Microstructure Analysis of Mechanical Energy Aided Aluminized Layer on Stainless Steel
Effects of Sintering Temperature on Properties of W-9.8Ni-4.2Fe Alloys Fabricated by Spark Plasma Sintering
Analysis of Cement Hydration Monitoring Using Embedded and External Ultrasonic Transducers
Fracture Energy of Reactive Powder Concrete Based on Uniaxial Tensile Test
Investigation of Cleavage Fracture Behavior in Notched Specimens of a Low Alloy Hot Rolled Steel 16MnR
Effect of MgO on Structure and Properties of CaO-Al2O3-SiO2 Glass System
Study on Direct Annealing Process of Hot-Rolled Plate
Semisolid Die-Casting Process of Mg-20Al-0.8Zn Magnesium Alloy
Coating of Electrode by Myristic Acid via Microwave Reaction
Effect of Solution Treatment on Microstructures and Mechanical Properties of Centrifugal Casting Al-Cu Alloy
TiN Modified Layer on the 20CrNiMo Steel Surface by Needle-Shape Cathode Glow Plasma Discharging
Effect of Al Content on the Microstructure and Property of TiC/Al Ceramic Matrix Coating Deposited by Laser Cladding on Ti-6Al-4V Alloy
Influence of Ru on the Microstructure of Ni-Base Single Crystal Superalloys
Thermal Analysis of Functionally Graded Plates by Wavelet Method
Durability of Mechanically Loaded Strain-Hardening Cement-Based Composites (SHCC)
Effect of Mg-Zn-Y Quasicrystal Master Alloy on Microstructure and Mechanical Properties of AZ91 Alloys
Application of Styrene-Butadiene Rubber in Cement-Based Materials
The Effect of B on the Microstructure and Property of Ultra-Thick Abrasion Resistant Flux-Cored Wire Deposited Metal
Effect of TaC on W-Ti-Co Ultrafine Cemented Carbides
Study on Microstructure and Properties of New Aluminum-Based Sliding Bearing Alloy
Microstructure Evolution of Mg-6Zn-6Al Magnesium Alloy during Semi-Solid Partial Remelting
Series of Al-P Master Alloy and Excellent Refining Performance on Hypereutectic A390 Alloys
Chapter 6: Polymer Materials
The Thickness Thinning Criterion of Vacuum Forming Refrigerator Inner Liner for HIPS
Study on the Development of Reinforced Polypropylene Chopped Glass Fiber Sizing Agent
Abrasion Behavior of Superhydrophobic Films Comprised of Polyurethane Elstomer
The Synthesis of P-Sulfonatephenylazocalix[8]Arene and its Analytical Application
Molecularly Imprinted Polymer for Preparation and Adsorption of Phenylalanine
Study on Synthesis and Adsorption Properties of Chitosan Modified by DMF Grafted -CD
Molecularly Imprinted Polymer Prepared by Precipitation Polymerization for Quercetin
Kinetic Modelling and Finite Element Simulation of Natural Rubber Non-Isothermal Vulcanization
A Novel Thermoviscosifying Water-Soluble Polymer for Enhancing Oil Recovery from High-Temperature and High-Salinity Oil Reservoirs
Study on the Curing Kinetics of Epoxy Resin in Self-Healing Microcapsules with Different Shell Material
A High Throughput and High Selective Chemiluminescence Method for Quantification of Bifenthrin Based on Molecularly Imprinted Film
Study on Synthesis of Superabsorbent and Water Absorbency
Synthesis and Properties of a Novel Conjugated Polyfluorene Derivative
Preparation of a Thermo-Sensitive Poly(N-Acryloyl Alanine Methyl Ester) for Controlled Drug Release
Preparation of Straight and Orderly Polypyrrole Microrods through Soft Template Methods
Influence of Test Conditions and Couple Materials on Frictional Characteristic of Polymeric Materials
Synthesis, Characterization and Selective Recognition of Lead Using a New Ion Imprinted Polymer Material
Modified Hydroxyl Value Assay and Application in Analysis of Molecular Ingredient of Polylactic Acid Oligomers
The Electrochemical Polymerization of Polypyrrole Microstructures in an Aqueous Solution of Dodecylbenzenesulfonic Acid
Application of Interpenetrating Silicone Waterproofing Material in the Protection of the Concrete
Synthesis of a New Ion Imprinted Polymer Material for Separation and Preconcentration of Traces of Neodymium Ions
Synthesis and Properties of a Novel Conjugated Polyfluorene Derivative
Ammonium Polyphosphate with Crystal Form V by DAP+P2O5
Preparation of Conducting Polypyrrole in Gelatin Solution
Plugging Performance Optimization Tests of Grouting Material for Sudden Water Inflow of Underground Engineering Construction
Effect of Emulsifier of Sizing Agent on Properties of Sizing Agent and Carbon Fibers
Chapter 7: Composite Materials
Finite Element Analysis of X-Cor Sandwich's Compressive Strength
Vacuum-Free Stirring Brazing of SiCP/A356 Composites and Aluminum Alloy Using Semisolid Filler Metal with Low Solid Fraction
Corrosion Resistance of the Eletrodeposition Nano-TiO2/Ni Composite Coating on AZ91HP Mg Alloy
Preparing of Army-Green Ceramic Coating on LY12 Alloy and the Study of Fastness to Ultraviolet Light
Preparation of Sizing Agents for Carbon Fiber Adapt to Various Polymer Matrix
Thermal Shock Resistance of ZrO2 Fiber/Al2O3 Ceramics
Effect of the Chemical Treated Kevlar Fiber on the Behaviors of Cement Mortars
Study on Properties of Crops Fiber/Gypsum Composites
Surface Modification of Cornstalk Fiber and Properties of Cornstalk Fiber/Gypsum Composites
Structure and Properties of Organic-Vermiculite/Polyimide Composite Films
Grinding Characteristics and Removal Mechanisms of LaPO4/Al2O3 Micro-Nano Composite Ceramics
Effect of Coupling Agent Modify Filler on the Electrical Properties of Sheet Molding Compounds
A Novel Model of Steady-State Sliding Wear with Electrical Current
Study on the Preparation and Properties of -PbO2-CeO2-TiO2 Composite Material on Aluminum-Matrix
Improve the Optical Properties of Rhodamine B by Encapsulating in Al-MCM-41
Preparation and Properties of Expanded Vermiculite Modified Bitumens
Fabrication and Tribological Properties of High Temperature Self-Lubrication Composites Prepared by Gas-Pressure Infiltration Technique
The Isothermal Oxidation Behavior of Ti2AlN and Ti2AlN/TiN in Air
Influences of Polymer Fiber and Polymer Latex on Physical Properties of Cement Mortar
Effect of Dissolving of WC/W2C on the Interface Microstructure of Iron Matrix Hardfacing Alloys
Prediction of Heating Processing-Properties of Ti2AlC/TiAl Compound Materials Based on BP Neural Network
Fractural Research on Ti2AlC/TiAl Compound Materials
Process Optimization of Cefradine/ Montmorillionite in Solution Intercalation
Influence of Base Thickness on Properties of 1-3-2 Connectivity Cement Based Piezoelectric Composite
An Exploration of 1-3 Cement/Epoxy Resin Based Piezoelectric Composite in Cement Hydration Reaction Process Monitoring
Preparation and Properties of a Novel Water Soluble Core Material for the Resin Transfer Molding Process
Study on Mechanical and Electromagnetic Shielding Properties of Carbon Fibers/Butyl Rubber Composite Films
Study on Epoxy Based Magnetorheological Elastomers
Formation of SiC-Al Interface in SiC Whisker Reinforced Al Composite
Preparation of Low-Heat Portland Cement Clinker with Coal Gangue
Study on Properties of Organic Modified SiO2 Glass Prepared by Sol-Gel Method
Influences of Modified Chemical Blowing Agents on Foaming of Wood Plastic Composites Prepared from Poly(Vinyl Chloride) and Rice Hull
Absorbing Properties of Fe-Based Amorphous Powder/S-Glass Fiber Reinforced Epoxy Composite Panels with Gradient Layer Structure
Study on Processes and Properties of Continuous Woven Roving Reinforced Polyurethane Composites
The Effect of Different Optical Fibers on the Tensile Property of CFRPs
Determination of Creep Parameters of Conductive Asphalt Concrete
Natural Rubber/Bombyx Mori Silk Fibroin Composites: Preparation and Properties
Synthesis and Properties of Electroless Ni-P-W/Nano-Al2O3 Composite Coatings Deposited on Sintered NdFeB Permanent Magnet
Chapter 8: Constructional Materials
Research on Hydration of Waterproof-Typed Semi-Hydrated Gypsum
Preparation and Properties of Cement Mortar Modified by VAE Latex
Experimental Study on Influential Factors of Adiabatic Temperature Rise for Mass Concrete
Influence and Mechanism of Polymer Coating on Shrinkage of Cement-Based Materials
The Failure Mode and Anti-Crack Performance of the Steel Fiber Reinforced High Strength Concrete Four-Pile Cap
Preparation and Application of the Vesicant in Gypsum
Effects of LaCrO3 Composite Additive for the Hydration Resistance of MgO-CaO Refractory
Application of New Concrete Materials in Channel Lining of the South-to-North Water Diversion Project
Effects of Viscosity Modifying Admixtures on the Workability of Self-Compacting Concrete
Study on Anti-Ultraviolet Radiation Aging Property of TiO2 Modified Asphalt
Research on High Performance Sulfoaluminate Cement Underwater Non-Dispersed Concrete
Effect of P2O5 on the Properties of Alite-Calcium Strontium Sulphoaluminate Cement
Effects of CaF2 on the Formation Kinetics of Portland Cement Clinker
Study on Sintering Technology and Performance of Alite-Rich Cement Modified by C1.5Sr2.5A3S Mineral
Study on the Adaptability Between the Amount of C3S Mineral in Alite-Sulphoaluminate Cement Clinker and the Fly Ash
Influence of Species of Manufactured Sand on Basic Performances of Mortar
Study on Integral Utilization of Alkaline Slag and Fly Ash
Spectrophotometric Determination of the Ca Ion Content in Steel Slag by Using Chlorophosphonazo as the Spectral Chromogenic Reagent
Study on Preparation and Properties of Cement-Based Foamed Lightweight Thermal Insulation Material
Effect of Doped with BaO on the Formation Dynamics of Alite in Alite-Rich Cement Clinker
Effect of Slag on Expansion of Alite-Calcium Barium Sulphoaluminate Cement
Experimental Investigation on Related Properties of Asphalt Mastic Containing Recycled Cement Mortar Powder
Thermally and Chemically Added-Calcium Composite Activation of Coal Gangue and its Application in Cement
Influence of Slag and Fly Ash on the Self-Healing Ability of Concrete
Effect of Gypsum on Hydration Degree and Structure of Hardened Paste of Alite-Strontium Calcium Sulphoaluminate Cement
Relationships of Strengths and Dimensional Effect of Plastic Concrete
Application of Second Law of Fick in NaCl Attack of Sulphoaluminate Cement
Study of Adsorptive Behaviors of Aminosulfonic Acid-Based Superplasticizer on the Calcium Sulphoaluminate Mineral
Design and Choose Assessment Parameter for Concrete Performance of Anti-Sulfate Erosion
Preparation of Nano Rice-Husk Ash and Effect on the Water-Resistance of Magnesium Oxychloride Composites
Effect of MoO3 on the Clinkers Formation of Portland Cement
Microwave Synthesis of Dicalcium Silicate: - Comparison with Conventional Synthesis
Performance of Belite-Barium Calcium Sulphoaluminate Cement Prepared by Substituting Fly Ash for Clay
Pond Ash: An Alternative Material as Fine Aggregate in Concrete for Sustainable Construction
Research on the Performance of Ba-Bearing Aluminoferrite Cement
Research on Enzymatic Hydrolysis Lignin Modified Petroleum Asphalt
Experimental Research on Compressive Strength of Self-Compacting Concrete with Recycled Coarse Aggregates
Influence of Compounding Malic Acid with Plasticizers on Hydration Heat of -Calcium Sulphate Hemihydrate
Influence of Limestone Powder on Performance of the Pre-Mixed Cement Mortar
Effect of Mixed Material on Sulphoaluminate Cement Sulfate Attack Resistance
Study on Using Low Quality Fly Ash to Produce Baking-Free Bricks
Corrosion Behavior of Super-Hydrophobic Surface on Fe3Al in Seawater
The Study on Accelerated Life Mechanism of Glass Fiber Reinforced Magnesium Oxychloride Cement
Pore Structural Changes and Carbonated Depth of Carbonated Steel Slag
Influence of Mechanical Behavior of Adhesives on Shear Stress Distributions in the Single-Lap Adhesive Joints
Chapter 9: Nano Materials
Photoluminescence Properties of InGaN/GaN Multiple Quantum Well Light Emitting Diodes by Metalorganic Chemical Vapor Deposition
Heat Transfer Analysis of the Micron-Scale Agglomerates of TiO2 Precursor during the Detonation Process
Y3Al5O12 Nanocrystallites Prepared from a Novel Crystalline Precursor
Facile Synthesis of Cobalt Oxide Uniformly Coated on Multi-Wall Carbon Nanotubes for Supercapacitors
Effects of Conductive Supports on the Growth and Capacitive Performance of Nanostructured Manganese Oxides
Large-Sized TiO2/SiO2 Macroporous Materials for Photo-Degradation of Organic Compounds in Water and Air
Synthesis and Characterization of Sol-Gel Derived Magnesium Tantalate Nanopowder
Density Functional Theory Study of Influence of Hydrogen Absorption on the Field Emission Properties of Carbon Nanotubes
Influence of Treatment of Hydrogen Plasma on Field Emission Properties of Carbon Nanotubes Films
Synthesis, Photophysical Properties and Aggregates of a New Pyridinium Dye
Effect of Volume Fraction and Temperature on Thermal Conductivity of SiO2 Nanofluids
Conducting Polymer Functionalized Single-Walled Carbon Nanotubes: Synthesis, Morphological Characteristics and Thermal Stability
Synthesis and Characterization of Nanocrystalline Mg4Nb2O9 by the Modified Sol-Gel Method
Facile Synthesis and Properties of CdxZn1-xSe Alloy Nanocrystals
Preparation and Photoluminescence of Hybrid SiO2-Coated CdTe Nanocrystals
Anatase Nano Titanium Oxide Synthesized Using the Hydrothermal Method and its Optical Absorption Properties
Synthesis and Properties of CdSe/CdXZn1-XS Quantum Dots
Synthesis of -Ni(OH)2 Peonies Assembled from Nanosheet Building Blocks and Corresponding NiO Porous Peonies
Synthesis of Carbon/Carbon Core/Shell Nanofibers by Co-Pyrolysis of Tetrahydrofuran and Ferrocene
Carbon Nanotubes-Doped Glassy Carbon Ceramic Composite Electrode and its Electrocatalytic Reduction of Nitrite
Electrocatalytic Reduction of Nitrite at Carbon-Nanotube-Modified Glassy Carbon Electrodes
The Effect of Alcoholic Reducing Agent on Morphology and Structure of VO2 (B) Nano-Particles
Characterization and Properties of Sol-Gel-Derived Polyurethane Acrylate/Silica Hybrid Materials
Preparation and Characterizations of Na2Ti3O7, H2Ti3O7 and TiO2 Nanobelts
The Microstructure of Zinc Oxide Films Prepared by Hydrothermal Method
Temperature Dependent Photoluminescence of ZnO Nanorods Synthesized by Hydrothermal Method
Effect of Reaction Temperature on the Morphology of Carbon Nanofibers
Preparation and Characterization of Poly(Acrylamide)/Silica Nanocomposite Gels
Characterization and their Fluorescence of Fe3+-Doped La2Zr2O7 Nanocrystals by a Salt-Assistant Combustion Method
Photoluminescent Properties of TGA-Capped CdTe Quantum Dots
Facile Fabrication of Free-Standing Titanium Dioxide Nanorods Array with Highly Efficient Ultraviolet Light Induced Photocatalytic Activity
The Preparation of Nano-Sized Lead Sulfide in High Power Pulse Ultrasonic Reactor
Synthesis and Characterization of Mesoporous Silica Nanoparticles Embedded Gadolinium Oxide
A Solid-State Reaction Route to Synthesize Crystallinic FeB Nanoflowers and their Magnetic Properties
A Novel Method for Preparing High Efficient Fluorescence-Encoded Microspheres with Semiconductor Nanocrystals
Influence of Doping Methods on the Gas-Sensing Properties of CuO-SnO2 Sensors
Water-Based Polyurethanepolyaniline Conductive Core-Shell Latex Nanoparticles
Correlation of Structural and Optical Properties of nc-Ge/a-Si Multilayers Grown by Ion Beam Sputtering
Influence of Different Processing Parameters on the Structure of Anodic Aluminum Oxide Membrane
Preparation and Characterization of Mg(OH)2 Flame-Retardant with Particular Morphology via Hydrothermal Process
Finite Element Analysis of High Pressure Torsion Processing
Phase Diagram of the LiCl-MgCl2-Na2cSiO3-H2O System at 150 DegreesC and Synthesis of Hectorite
Synthesis of Carbon Nanotubes, Carbon Spheres and Slices of Vertically Aligned Multi-Walled Carbon Nanotubes
Characterizations and Crystal Structure of Metallic Ion Doped Titania Nanofiber by Sol-Gel Method
Synthesis of CdS Quantum Dots for Detection of Copper (II) Using Fluorescence Spectroscopy
CdSe Quantum Dots Decorated by 3-Aminobenzeneboronic Acid as Fluorescence Probe for Glucose
Hard-Templating Synthesis of Mesopours La1-xSrxMnO3+ Perovskite and Catalysis Activity in CO Oxidation
Synthesis of CdTe and CdTe/CdS Core-Shell Quantum Dots and their Optical Properties
Determination of Interdiffusion Coefficient in Nanolayered Structures by Auger Electron Spectroscopical Sputter Depth Profiling
Preparation and Dispersion of Polyacrylamide-Grafting Graphene
Electron Microscopy Study of Y-Shaped Carbon Fibers with Different Morphologies
Complexional Ultrafine Zinc Oxide Powders Prepared by Controlled-Release Precipitation
Preparation and Characterization of BCN-TiO2 Nanoparticles
Study on Amorphization of Mechanical Alloyed Cu50Zr40Ag10 Alloy
Effect of Reaction Temperature on Carbon Nanotubes
Numerical Simulation of Dense Phase Pneumatic Conveying Gypsum in Stepped Pipeline
Preparation and Characterization of Hydrophobic Mesoporous SiO2 Aerogel
Nanocrystalline ZrO2 Porous Ceramics Fabricated by SPS
The Electrical and Optical Properties of Al-Doped ZnO Thin Films Prepared by Atomic Layer Deposition
Electrodeposition of Au/Brush-Zn Heterojunction Nanowires
Comparison on Optical Properties of Cu-Al2O3 and Co-Al2O3 Nano-Array Composite Structure
Visible-Light Photocatalytic Activity of the Bi2Ti4O11 Nanorods
Repeated Synthesis of MCM-48 Microspheres with a Fixed Ethanol-to-Water Ratio
The Influence of the Temperature on the Light-Sensitive Character of WO3 Nanorods Synthesized by the Hydrothermal Method
-Ni(OH)2 Flower-Like Spheres and Nanoflakes Synthesized Using the Hydrothermal Method and its Formation Mechanism
A Strategy to Produce Single and Double Layer Graphene Sheets
Ultrasensitive Chemiluminescence Detection of Indoleacetic Acid Catalyzed by Silver Nanoparticles
A Study on Mechanism of Tribological Behavior of Carbon Nanotubes
Preparation and Characterization of Cerium-Doped Tin Oxide Gas Sensors
Chapter 10: Environmental and Green Materials
Photocatalytic Properties of F-TiO2/Ti Photoelectrodes Prepared by Microarc Oxidation Method under Visible Light Illumination
Mechanical Properties Simulation of Squeeze Cast Magnesium Alloy
Iron Doped Lanthanum Stannate Pyrochlores (La2Sn2-XFeXO7) for the Simultaneous Catalytic Removal NOx and Soot
Experimental Research on Mechanical Properties of Coal Paste Filling Material
Study on the Kinetics of Phosphor-Gypsum Pyrolysis
Ecological Barium-Crystal Glass Based on Thailand Quartz Sands Doped with Zirconium Dioxide
The Phosphorus Removal Characteristics of Grain-Slag as Filter Media
Electrochemistry Characterization of Ionic Liquid-Type Phosphomolybdic Salt with Modified Electrode
Preparation of a Novel Poly-Silicic-Ferric Coagulant from Fly Ash Extract
The Research of Fired Grain Slag Brick
Multiple Objective Preform Die Shape Optimization Design for Controlling Forging's Shape and Deforming Force during Forging Process
Synthesis and Application of an Efficient and Stable Solid Acid Catalyst St-c-AS
Suppressing the Powdering of Zirconia Fibers after High-Temperature Application by Large Additions of Yttria
A New Treatment Method of Pineapple Leaf Fiber for Textile Use
Preparation and Oxygen Intake/Release Characteristics of YBaCo2Fe2O7
Extraction Behavior of Scandium Cation in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and 2-Ethylhexyl Phosphonic Acid-2-Ethylhexyl Ester
Anaerobic Biohydrogen Production by the Mixed Culture with Mesoporous Fe3O4 Nanoparticles Activation
Study on Solvent Extraction of Fast Pyrolysis Bio-Oil
Research Progress in Protective Organic Silane Films
Study on the Treatment of Domestic Sewage with Water Quenched Slag Biological Aerated Filter
Investigations of Adsorption of 1-Dodecyl-3-Methyl Imidazolium Chloride on Iron Surface as Corrosion Inhibitor
Effects of Li2O on Properties of Low Fluoride Content Mould Flux for High Speed Continuous Casting
Effect of Kaolin on the Properties of Flue Gas Desulphurization Gypsum-Steel Slag Cementitious Materials
The Relationship Between the TiO2 Photocatalyst Deactivation, Regeneration and the Concentration of the Surface Adsorbed SO42-
Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Acrylic Acid
Experimental Research on Durabilities of Coal Gangue Concrete
Synthesis and Characterization of Mesoporous SAPO-11 by Using Carbon Particles
The Application of Peroxide in the Degumming Process of Ramie
The Key Problems in the Manufacturing of the Bamboo Buffer Packaging Material
GGBFS Activated by Tetra-Isopropyl Titanate
Floc's Formation and Settlement of Organic Poly-Silicic-Ferric Coagulant
Mathematical Modeling and Numerical Simulation of Fouling Processes of Polymeric Ultrafiltration Membrane
Study on the Oil-Absorbing Materials with Waste Plastics
Analysis of Photo-Degradation of Dyed Veneer by XRD and SEM
Research on Strategy-Oriented Management of Environment Performance of County and Municipal Party and Government Leaders
Study on Performance of Al-Zn-In-Mg-Ti Sacrificial Anode
Study on the Addition of SiO2 into Lithium-Iron-Phosphate Glass
Biomimetic Hemocompatible Nanofibrous Scaffolds as Potential Small-Diameter Blood Vessels by Bilayering Electrospun Technique
Grafting Sulfoammonium Zwitterionic Brushes onto Polycarbonateurethane Surface to Improve Hemocompatibility
Electrochemical Properties of PANI/CNTs Composites Modified by Oxygen Plasma
Fluorescent Sensors for Nitroaromatic Compounds Based on the Comb-Like Polysiloxane-Acrylate
Flexible and Ordered Macroporous PMMA Polymers Films
Synthesis and Characterization of Highly Regioregular Poly (3 - Hexylthiophene)
Experimental Study on Uniaxial Time-Dependent Cyclic Deformation of POM/PTFE Blends
Preparation of L-Tryptophan Imprinted Polymer Microspheres in Aqueous Media by In Situ Grafting on Surface
The Properties and Hydrolysis of Polysiloxanes with Cyanoethyl Groups
Synthesis and Application of Molecularly Imprinted Sol-Gel Film for Simultaneous Determination of Multi-Component Pesticide Residue
Influence of the Heating Conditions on the Asphalt Compositions by Grey System Theory
Relation of 2D Permeability and Preform Structure Parameters
Effect of Super-Absorbent Polymer as Admixture on the Mechanical Properties of Mortars
Synthesis and Properties of an Amphoteric Superplasticizer Compatible with Sulphoaluminate Cement
Effect of Glycerol on the Self-Assembly of P123 in a Room-Temperature Ionic Liquid [Bmim]PF6
Effects of UV Aging on the High-Temperature and Fatigue Performances of Asphalt Mortar
Preliminary Study on Asphalt Mortar Containing Shaped-Stabled Phase Change Material
Investigation on Static Shear Creep Behavior of Asphalt Mastic Containing Recycled Red Brick Powder
Preparation, Characterization and Microwave Absorption Properties of Nano/Micro Carbon Fiber
Preparation and Properties of Enzymatic Hydrolysis Lignin Modified Thermoplastic Starch Composites
Growth and Magneto-Optical Properties of CaTbAlO4 Crystal
Synthesis of Nanocrystalline (W, Ti)C from Respective Elemental Powders by Mechanical Alloying and Spark Plasma Sintering
Study on the Preparation and Mechanical Properties of Polystyrene/Y2O3 Composites
Catalytic Synthesis of Dioctyl Phthalate over Al-MCM-41 Molecular Sieves
Microstructures of Graphite/Copper Composites Prepared by Mechanical Milling and Hot Extrusion
The Influence of Solvent Metal Microstructure on Synthetic Quality of Diamond Single Crystals
Influence on Activation Property of Calcined Coal Gangue by [SO4]2+
The Effect of Depositing Time on the MPCVD of Diamond on Porous Carbon Monolith
Photocatalytic Property of Amorphous WO3 Films Prepared by Reactive Magnetron Sputtering
Synthesis and Characterization of Silicone Based Pressure Sensitive Adhesive
The Preparation of TiO2 Nanotube Arrays
Synthesis and Characterization of Water Based Acrylic Pressure Sensitive Adhesive of Surface Protection Tape
by "Nielsen BookData"