Emerging focus on advanced materials : selected, peer reviewed papers from the 1st International Congress on Advanced Materials 2011 (AM2011) May 13-16, 2011, Jinan, P.R. China

著者

• International Congress on Advanced Materials
• Liu, Shiquan
• Zuo, Min

書誌事項

Emerging focus on advanced materials : selected, peer reviewed papers from the 1st International Congress on Advanced Materials 2011 (AM2011) May 13-16, 2011, Jinan, P.R. China

edited by Shiquan Liu and Min Zuo

（Advanced materials research, v. 306-307）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

This special collection of papers covers fields including: Biomaterials and Tissues, Energy-Harvesting Materials and Energy-Transfer Materials, Optical and Electronic Materials, Superconductive and Magnetic Materials, Structural Materials, Polymer Materials, Composite Materials, Constructional Materials, Nanomaterials, Environmental and Green Materials. These selected articles focus on the latest developments in advanced materials. The proceedings will provide materials scientists and engineers with a comprehensive overview of the preparation, characterization, performance and application of materials.

目次

Preface and Committees Chapter 1: Biomaterials and Tissues Grafting Biomimetic Phospholipid Zwitterionic Brushes onto Polycarbonateurethane for Improving Hemocompatibility Dynamic Cell Patterning Technology Based on Photocleavable Molecules Conductometric Study of the Effect of Citric Acid on Phase Evolution of Calcium Phosphate in Solutions SiO2 Beads with Quantum Dots: Synthesis and Bioapplication Measurement of Glucose Concentration in Cancer Cell by Catalyzed-Enzyme Reaction Preparation and the Blood Compatibility of Titanium Oxide Nanorod Arrays Advances in Biosensor Application for Environmental Monitoring Preparation of PVA/PEG Phase Change Composite Nanofibers by Electrospinning Study on Preparation and Sensitive Properties of Polyethylene Glycol (PEG) / Polyvinyl Alcohol (PVA) Thermo-Sensitive Hydrogel The Magnetism of DNA Molecular Materials Thermal and Thermo-Oxidative Degradations of Deproteinized Natural Rubber and Natural Rubber Fabrication of Shortened Electrospun Fibers with Concentrated Polymer Brush Toward Biomaterial Applications Biomimetic Synthesis of Fluorapatite Coating Reinforcement of Hydroxyapatite with Multi-Walled Carbon Nanotubes Shape-Memory NiTi Foam Synthesized by CIP and Sintering with NaCl Space-Holders Synthesis of Chemical Responsive Chitosan-Grafted-Polyaniline Bio-Composite Study on the Microbial Hydrolysis of Maize Straw and the Water Reducing Properties of the Hydrolysate Chapter 2: Energy Harvesting Materials and Energy-Transfer Materials Isothermal Oxidation Behavior of the AISI430 Stainless Steel at High Temperature in Static Air Rheological Behavior of Semisolid Al-6.5wt%Si Alloy at Transient State Rheological Behavior of Semisolid Al-6.5wt%Si Alloy under Cyclic Shear Deformation Self-Assembly Proton Exchange Membranes for Direct Methanol Fuel Cell with Size-Controlled Au Nanoparticles Preparation and Photovoltaic Properties of Flexible Dye-Sensitized Solar Cells Texture and Ductility of Ni3Al Foils Research on Optimization Design of Shearer Sliding Shoes by Plasma Cladding Cr28MnV Fabrication of Anti-Reflective Coatings on Solar Collector Tubes Catalytic Properties of Ni3Al Foils for Hydrogen Production Facile Preparation of NiO/Ni Nanocomposite and its Electrochemical Capacitive Behaviors Characterization of AB5-Type Metal Hydride Modified by Electroless Plating Nickel in Forming Process Combustion Characteristics of Biomass and its Cellulose The Synthesis of New Rhodanine Ramification and Application in Determine Trace Bismuth Optimization for the Formation of Metal Hydride Electrode Used in Ni/MH Batteries Preparation and Electrochemical Properties of Pt/Mesoporous-C for Oxygen Reduction Reaction: Effect of Carbonation Temperature Growth and Photovoltaic Performance of Single-Crystal TiO2 Nanorod Array Directly on Transparent Conducting Substrates Chapter 3: Optical and Electronic Materials Synchrotron Radiation X-Ray Absorption and Optical Studies of Cubic SiC Films Grown on Si by Chemical Vapor Deposition Luminescence in Rare Earth Activated AlPO4 Phosphor Synthesis and Photoluminescence of Cr-Doped Rod-Like ZnO Particles by Hydrothermal Method Silicon Microfabrication Processes Including Anodic Bonding of Extremely Thin (60 m -Thick) Silicon on Glass Characteristics of Gamma-Ray Irradiated Pentacene Organic Thin Film Field Effect Transistors Fabrication of Condenser Microphones on Silicon on Insulator Wafer Influence of the Quality of AlN Buffer Layer on the Quality of GaN Epitaxial Layer on Silicon Substrate Two Novel Tetrahedrally Silicon-Based Benzimidazole Derivatives: Potentials as Blue Emitters for OLEDs Study on Hydrothermal Synthesis of LaPO4:Eu3+ Materials Synthesis of Main-Chain Polyimides Containing Azoaryl and their Third-Order NLO Properties Preparation and Properties of Oxidized Coal/Polyaniline Composite Material Synthesis, Crystal Structure and Photoluminescence of Eu(Phen)(DMF)2(NO3)3 (Phen = Phenanthroline and DMF = N,N-Dimethylformamide) Synthesis, Characterization and Luminescence of Europium, Terbium Complexes of 1,1'-(Pyridin-2,6-Diyl) Bis-3-P-Tolylpropane-1,3-Dione Comparison between Vanadium Dioxides Produced by Ammonium Metavanadate and Vanadium Pentoxide Electron Stimulated Surface Chemical Reaction Mechanism for Phosphor Degradation Synthesis and Liquid Crystal Properties of a New Organometallic Palladium Complex Growth of p-Type AlN Crystals by C and Si Codoping Promising Zn3Ta2O8:Pr3+ Red Phosphor for Low Voltage Cathodoluminescence Applications Optical Properties of the 3-D Composite Photonic Crystals Prepared by Modified Dip-Coating and Coating First Method Synthesis and Properties of Poly(3,4-Ethylenedioxythiophene) via Solid-State Polymerization Structural and Optical Properties of CdS Thin Films Grown by Sputtering Theoretical Studies on P-Type Conduction in (S,Cu) Co-Doped ZnO Study on Arc Ion Plating Nitride Films of Microscopic Morphology and Micro-Hardness Studies on Donor-Acceptor Substituted with Triphenylamine-Core Fluorescent Derivatives Study on Novel Method to Measure Luminescence Time Interval Between the Initial and Terminal of Light Emission in Frequency Domain A Cement Based Piezoelectric Composite Sensorfor Health Monitoring of Civil Engineering Structure Electrochemical Polymerization of N-(9-Fluorenylmethoxycarbony)-Glycine and Characterization of its Polymers Effect of Shape Parameter on the Performance of 1-3 Piezoelectric Composites Fabrication and Properties of 1-3 Polymer Modified Cement Based Piezoelectric Composites High Quantum Efficiency Dependence on Structure Optimizatin for Gallium Nitride Photocathode The Range Distribution of Nd Ions Implanted in Silicon-on-Insulator Poly[N-(9-Fluorenylmethoxycarbonyl)-L-Phenylalanine] with Good Solubility and Good Blue Light-Emitting Properties via Electropolymerization Electrocatalysis Property of DNA-Hydroxyapatite Modified Electrode on Chloramphenicol Synthesis and Character of Fluorescence Reagent 3-P-Nitrylphenyl-5-(2'-Sulfonophenylazo) Rhodanine Synthesis of Large-Area and Monolayer of Graphene: Role of Transition Metal Support and Growth Time by CVD Method Influence of Electroless Copper Deposition on the Electrochemical Performance of Si/MCMB Mechanical and Thermal Behaviors of the Acrylic Based Core-Shell Rubber Modified Poly(Lactic Acid) Preparation of N-Doped TiO2/NiO Composite Electrode and its Photoelectrochemcal Characteristics Synthesis and Fluorescence Properties of Hyperbranched Poly(Amido Amine) with New Fluorescence-Emitting Moieties Growth and Properties of Cubic Potassium Tantalate Niobate Crystals Synthesis, Electronic States, and Electroluminescent Properties of Aluminum Complex Based on Mixed Ligands with 8-Hydroxyquinolinate and Acetylacetone Properties of Al Doped ZnO Thin films by DC Reaction Magnetron Sputtering Process Research of Amorphous SiO2 for Optical Fiber Preform by Sol-Gel Influence of Annealing Temperature on the Structure and Electrochromic Properties of NiOx Thin Films Chapter 4: Superconductive and Magnetic Materials Effect of Finishing Temperature on Texture Evolution and Magnetic Properties in Heavy Cold Rolled High Silicon Steel Thin Sheets ABS Fabrics Chemically Plated by Cu/Ni-P as Electromagnetic Shielding Material Transmission Properties of Thue-Morse Quasi-Periodic 1D Superconducting Photonic Crystals Magneticbead-Based Enzyme-Linked Immunoassay for Detection Carcinoembryonic Antigen in Gastric Cancer Cells Ground State and Transport Property in Superconductors with Artificial Pinning Arrays Synthesis and Characterization of Nano-Hexaferrites SrFe12O19 by Aqueous Solution Method Monodisperse Fe3O4/Fe Core/Shell Nanoparticles with Enhanced Magnetic Property Preparation of TbBO3 Powder and Growth of TbBO3 Crystal Chapter 5: Structural Materials Dry Sliding Wear Behavior of Hot Pressed Fe-28Al and Fe-28Al-10Ti Alloys Grain Refinement of AZ91D Magnesium Alloy by In Situ Al4C3 Particles Dislocation Configurations in Single-Crystal Superalloys during High-Temperature Low-Stress Creep Study on the Stability and Phase Transition of Precipitated Phases Al6Fe and Al3Fe in Al-Fe Alloy High Energy Micro-Arc Alloying of Mg-RE on AZ31 Mg Alloy Surface Oxygen Diffusion Hardened Titanium Material TC4 Anomalous Change of the Electrical Resistivity and the Structure of Sn Melt with Temperature Improvement of Concrete Materials by Bacterial-Mediated Precipitation Die Optimal Design for a Large Diameter Thin-Walled Aluminum Profile Extrusion by ALE Algorithm High Temperature Electrochemical Synthesis of Tungsten Boride from Molten Salt A Fast Method for Determining Physical Properties of Slags with Contact Angle Microstructure and Mechanical Behaviors of AZ91 Magnesium Alloy with Thermal Rate Treatment Technique Temperature Effect of Refining Performance by Al-Ti-B (C) Master Alloys Densification Behavior and Pores Evolution of Selective Laser Sintering Parts during Post Microwave Sintering Process Dynamic Crushing Behavior of the High-Density Closed-Cell Foams Fatigue Characteristic and Dislocation Substructure of A356 Casting Alloy under Multi-Axial Cyclic Loadings Influence of the Parameters on the Laser Deposited TiAl Layer Effect of Heat Treatment on Thixoformed AM60B Alloy Microstructure Analysis of Mechanical Energy Aided Aluminized Layer on Stainless Steel Effects of Sintering Temperature on Properties of W-9.8Ni-4.2Fe Alloys Fabricated by Spark Plasma Sintering Analysis of Cement Hydration Monitoring Using Embedded and External Ultrasonic Transducers Fracture Energy of Reactive Powder Concrete Based on Uniaxial Tensile Test Investigation of Cleavage Fracture Behavior in Notched Specimens of a Low Alloy Hot Rolled Steel 16MnR Effect of MgO on Structure and Properties of CaO-Al2O3-SiO2 Glass System Study on Direct Annealing Process of Hot-Rolled Plate Semisolid Die-Casting Process of Mg-20Al-0.8Zn Magnesium Alloy Coating of Electrode by Myristic Acid via Microwave Reaction Effect of Solution Treatment on Microstructures and Mechanical Properties of Centrifugal Casting Al-Cu Alloy TiN Modified Layer on the 20CrNiMo Steel Surface by Needle-Shape Cathode Glow Plasma Discharging Effect of Al Content on the Microstructure and Property of TiC/Al Ceramic Matrix Coating Deposited by Laser Cladding on Ti-6Al-4V Alloy Influence of Ru on the Microstructure of Ni-Base Single Crystal Superalloys Thermal Analysis of Functionally Graded Plates by Wavelet Method Durability of Mechanically Loaded Strain-Hardening Cement-Based Composites (SHCC) Effect of Mg-Zn-Y Quasicrystal Master Alloy on Microstructure and Mechanical Properties of AZ91 Alloys Application of Styrene-Butadiene Rubber in Cement-Based Materials The Effect of B on the Microstructure and Property of Ultra-Thick Abrasion Resistant Flux-Cored Wire Deposited Metal Effect of TaC on W-Ti-Co Ultrafine Cemented Carbides Study on Microstructure and Properties of New Aluminum-Based Sliding Bearing Alloy Microstructure Evolution of Mg-6Zn-6Al Magnesium Alloy during Semi-Solid Partial Remelting Series of Al-P Master Alloy and Excellent Refining Performance on Hypereutectic A390 Alloys Chapter 6: Polymer Materials The Thickness Thinning Criterion of Vacuum Forming Refrigerator Inner Liner for HIPS Study on the Development of Reinforced Polypropylene Chopped Glass Fiber Sizing Agent Abrasion Behavior of Superhydrophobic Films Comprised of Polyurethane Elstomer The Synthesis of P-Sulfonatephenylazocalix[8]Arene and its Analytical Application Molecularly Imprinted Polymer for Preparation and Adsorption of Phenylalanine Study on Synthesis and Adsorption Properties of Chitosan Modified by DMF Grafted -CD Molecularly Imprinted Polymer Prepared by Precipitation Polymerization for Quercetin Kinetic Modelling and Finite Element Simulation of Natural Rubber Non-Isothermal Vulcanization A Novel Thermoviscosifying Water-Soluble Polymer for Enhancing Oil Recovery from High-Temperature and High-Salinity Oil Reservoirs Study on the Curing Kinetics of Epoxy Resin in Self-Healing Microcapsules with Different Shell Material A High Throughput and High Selective Chemiluminescence Method for Quantification of Bifenthrin Based on Molecularly Imprinted Film Study on Synthesis of Superabsorbent and Water Absorbency Synthesis and Properties of a Novel Conjugated Polyfluorene Derivative Preparation of a Thermo-Sensitive Poly(N-Acryloyl Alanine Methyl Ester) for Controlled Drug Release Preparation of Straight and Orderly Polypyrrole Microrods through Soft Template Methods Influence of Test Conditions and Couple Materials on Frictional Characteristic of Polymeric Materials Synthesis, Characterization and Selective Recognition of Lead Using a New Ion Imprinted Polymer Material Modified Hydroxyl Value Assay and Application in Analysis of Molecular Ingredient of Polylactic Acid Oligomers The Electrochemical Polymerization of Polypyrrole Microstructures in an Aqueous Solution of Dodecylbenzenesulfonic Acid Application of Interpenetrating Silicone Waterproofing Material in the Protection of the Concrete Synthesis of a New Ion Imprinted Polymer Material for Separation and Preconcentration of Traces of Neodymium Ions Synthesis and Properties of a Novel Conjugated Polyfluorene Derivative Ammonium Polyphosphate with Crystal Form V by DAP+P2O5 Preparation of Conducting Polypyrrole in Gelatin Solution Plugging Performance Optimization Tests of Grouting Material for Sudden Water Inflow of Underground Engineering Construction Effect of Emulsifier of Sizing Agent on Properties of Sizing Agent and Carbon Fibers Chapter 7: Composite Materials Finite Element Analysis of X-Cor Sandwich's Compressive Strength Vacuum-Free Stirring Brazing of SiCP/A356 Composites and Aluminum Alloy Using Semisolid Filler Metal with Low Solid Fraction Corrosion Resistance of the Eletrodeposition Nano-TiO2/Ni Composite Coating on AZ91HP Mg Alloy Preparing of Army-Green Ceramic Coating on LY12 Alloy and the Study of Fastness to Ultraviolet Light Preparation of Sizing Agents for Carbon Fiber Adapt to Various Polymer Matrix Thermal Shock Resistance of ZrO2 Fiber/Al2O3 Ceramics Effect of the Chemical Treated Kevlar Fiber on the Behaviors of Cement Mortars Study on Properties of Crops Fiber/Gypsum Composites Surface Modification of Cornstalk Fiber and Properties of Cornstalk Fiber/Gypsum Composites Structure and Properties of Organic-Vermiculite/Polyimide Composite Films Grinding Characteristics and Removal Mechanisms of LaPO4/Al2O3 Micro-Nano Composite Ceramics Effect of Coupling Agent Modify Filler on the Electrical Properties of Sheet Molding Compounds A Novel Model of Steady-State Sliding Wear with Electrical Current Study on the Preparation and Properties of -PbO2-CeO2-TiO2 Composite Material on Aluminum-Matrix Improve the Optical Properties of Rhodamine B by Encapsulating in Al-MCM-41 Preparation and Properties of Expanded Vermiculite Modified Bitumens Fabrication and Tribological Properties of High Temperature Self-Lubrication Composites Prepared by Gas-Pressure Infiltration Technique The Isothermal Oxidation Behavior of Ti2AlN and Ti2AlN/TiN in Air Influences of Polymer Fiber and Polymer Latex on Physical Properties of Cement Mortar Effect of Dissolving of WC/W2C on the Interface Microstructure of Iron Matrix Hardfacing Alloys Prediction of Heating Processing-Properties of Ti2AlC/TiAl Compound Materials Based on BP Neural Network Fractural Research on Ti2AlC/TiAl Compound Materials Process Optimization of Cefradine/ Montmorillionite in Solution Intercalation Influence of Base Thickness on Properties of 1-3-2 Connectivity Cement Based Piezoelectric Composite An Exploration of 1-3 Cement/Epoxy Resin Based Piezoelectric Composite in Cement Hydration Reaction Process Monitoring Preparation and Properties of a Novel Water Soluble Core Material for the Resin Transfer Molding Process Study on Mechanical and Electromagnetic Shielding Properties of Carbon Fibers/Butyl Rubber Composite Films Study on Epoxy Based Magnetorheological Elastomers Formation of SiC-Al Interface in SiC Whisker Reinforced Al Composite Preparation of Low-Heat Portland Cement Clinker with Coal Gangue Study on Properties of Organic Modified SiO2 Glass Prepared by Sol-Gel Method Influences of Modified Chemical Blowing Agents on Foaming of Wood Plastic Composites Prepared from Poly(Vinyl Chloride) and Rice Hull Absorbing Properties of Fe-Based Amorphous Powder/S-Glass Fiber Reinforced Epoxy Composite Panels with Gradient Layer Structure Study on Processes and Properties of Continuous Woven Roving Reinforced Polyurethane Composites The Effect of Different Optical Fibers on the Tensile Property of CFRPs Determination of Creep Parameters of Conductive Asphalt Concrete Natural Rubber/Bombyx Mori Silk Fibroin Composites: Preparation and Properties Synthesis and Properties of Electroless Ni-P-W/Nano-Al2O3 Composite Coatings Deposited on Sintered NdFeB Permanent Magnet Chapter 8: Constructional Materials Research on Hydration of Waterproof-Typed Semi-Hydrated Gypsum Preparation and Properties of Cement Mortar Modified by VAE Latex Experimental Study on Influential Factors of Adiabatic Temperature Rise for Mass Concrete Influence and Mechanism of Polymer Coating on Shrinkage of Cement-Based Materials The Failure Mode and Anti-Crack Performance of the Steel Fiber Reinforced High Strength Concrete Four-Pile Cap Preparation and Application of the Vesicant in Gypsum Effects of LaCrO3 Composite Additive for the Hydration Resistance of MgO-CaO Refractory Application of New Concrete Materials in Channel Lining of the South-to-North Water Diversion Project Effects of Viscosity Modifying Admixtures on the Workability of Self-Compacting Concrete Study on Anti-Ultraviolet Radiation Aging Property of TiO2 Modified Asphalt Research on High Performance Sulfoaluminate Cement Underwater Non-Dispersed Concrete Effect of P2O5 on the Properties of Alite-Calcium Strontium Sulphoaluminate Cement Effects of CaF2 on the Formation Kinetics of Portland Cement Clinker Study on Sintering Technology and Performance of Alite-Rich Cement Modified by C1.5Sr2.5A3S Mineral Study on the Adaptability Between the Amount of C3S Mineral in Alite-Sulphoaluminate Cement Clinker and the Fly Ash Influence of Species of Manufactured Sand on Basic Performances of Mortar Study on Integral Utilization of Alkaline Slag and Fly Ash Spectrophotometric Determination of the Ca Ion Content in Steel Slag by Using Chlorophosphonazo as the Spectral Chromogenic Reagent Study on Preparation and Properties of Cement-Based Foamed Lightweight Thermal Insulation Material Effect of Doped with BaO on the Formation Dynamics of Alite in Alite-Rich Cement Clinker Effect of Slag on Expansion of Alite-Calcium Barium Sulphoaluminate Cement Experimental Investigation on Related Properties of Asphalt Mastic Containing Recycled Cement Mortar Powder Thermally and Chemically Added-Calcium Composite Activation of Coal Gangue and its Application in Cement Influence of Slag and Fly Ash on the Self-Healing Ability of Concrete Effect of Gypsum on Hydration Degree and Structure of Hardened Paste of Alite-Strontium Calcium Sulphoaluminate Cement Relationships of Strengths and Dimensional Effect of Plastic Concrete Application of Second Law of Fick in NaCl Attack of Sulphoaluminate Cement Study of Adsorptive Behaviors of Aminosulfonic Acid-Based Superplasticizer on the Calcium Sulphoaluminate Mineral Design and Choose Assessment Parameter for Concrete Performance of Anti-Sulfate Erosion Preparation of Nano Rice-Husk Ash and Effect on the Water-Resistance of Magnesium Oxychloride Composites Effect of MoO3 on the Clinkers Formation of Portland Cement Microwave Synthesis of Dicalcium Silicate: - Comparison with Conventional Synthesis Performance of Belite-Barium Calcium Sulphoaluminate Cement Prepared by Substituting Fly Ash for Clay Pond Ash: An Alternative Material as Fine Aggregate in Concrete for Sustainable Construction Research on the Performance of Ba-Bearing Aluminoferrite Cement Research on Enzymatic Hydrolysis Lignin Modified Petroleum Asphalt Experimental Research on Compressive Strength of Self-Compacting Concrete with Recycled Coarse Aggregates Influence of Compounding Malic Acid with Plasticizers on Hydration Heat of -Calcium Sulphate Hemihydrate Influence of Limestone Powder on Performance of the Pre-Mixed Cement Mortar Effect of Mixed Material on Sulphoaluminate Cement Sulfate Attack Resistance Study on Using Low Quality Fly Ash to Produce Baking-Free Bricks Corrosion Behavior of Super-Hydrophobic Surface on Fe3Al in Seawater The Study on Accelerated Life Mechanism of Glass Fiber Reinforced Magnesium Oxychloride Cement Pore Structural Changes and Carbonated Depth of Carbonated Steel Slag Influence of Mechanical Behavior of Adhesives on Shear Stress Distributions in the Single-Lap Adhesive Joints Chapter 9: Nano Materials Photoluminescence Properties of InGaN/GaN Multiple Quantum Well Light Emitting Diodes by Metalorganic Chemical Vapor Deposition Heat Transfer Analysis of the Micron-Scale Agglomerates of TiO2 Precursor during the Detonation Process Y3Al5O12 Nanocrystallites Prepared from a Novel Crystalline Precursor Facile Synthesis of Cobalt Oxide Uniformly Coated on Multi-Wall Carbon Nanotubes for Supercapacitors Effects of Conductive Supports on the Growth and Capacitive Performance of Nanostructured Manganese Oxides Large-Sized TiO2/SiO2 Macroporous Materials for Photo-Degradation of Organic Compounds in Water and Air Synthesis and Characterization of Sol-Gel Derived Magnesium Tantalate Nanopowder Density Functional Theory Study of Influence of Hydrogen Absorption on the Field Emission Properties of Carbon Nanotubes Influence of Treatment of Hydrogen Plasma on Field Emission Properties of Carbon Nanotubes Films Synthesis, Photophysical Properties and Aggregates of a New Pyridinium Dye Effect of Volume Fraction and Temperature on Thermal Conductivity of SiO2 Nanofluids Conducting Polymer Functionalized Single-Walled Carbon Nanotubes: Synthesis, Morphological Characteristics and Thermal Stability Synthesis and Characterization of Nanocrystalline Mg4Nb2O9 by the Modified Sol-Gel Method Facile Synthesis and Properties of CdxZn1-xSe Alloy Nanocrystals Preparation and Photoluminescence of Hybrid SiO2-Coated CdTe Nanocrystals Anatase Nano Titanium Oxide Synthesized Using the Hydrothermal Method and its Optical Absorption Properties Synthesis and Properties of CdSe/CdXZn1-XS Quantum Dots Synthesis of -Ni(OH)2 Peonies Assembled from Nanosheet Building Blocks and Corresponding NiO Porous Peonies Synthesis of Carbon/Carbon Core/Shell Nanofibers by Co-Pyrolysis of Tetrahydrofuran and Ferrocene Carbon Nanotubes-Doped Glassy Carbon Ceramic Composite Electrode and its Electrocatalytic Reduction of Nitrite Electrocatalytic Reduction of Nitrite at Carbon-Nanotube-Modified Glassy Carbon Electrodes The Effect of Alcoholic Reducing Agent on Morphology and Structure of VO2 (B) Nano-Particles Characterization and Properties of Sol-Gel-Derived Polyurethane Acrylate/Silica Hybrid Materials Preparation and Characterizations of Na2Ti3O7, H2Ti3O7 and TiO2 Nanobelts The Microstructure of Zinc Oxide Films Prepared by Hydrothermal Method Temperature Dependent Photoluminescence of ZnO Nanorods Synthesized by Hydrothermal Method Effect of Reaction Temperature on the Morphology of Carbon Nanofibers Preparation and Characterization of Poly(Acrylamide)/Silica Nanocomposite Gels Characterization and their Fluorescence of Fe3+-Doped La2Zr2O7 Nanocrystals by a Salt-Assistant Combustion Method Photoluminescent Properties of TGA-Capped CdTe Quantum Dots Facile Fabrication of Free-Standing Titanium Dioxide Nanorods Array with Highly Efficient Ultraviolet Light Induced Photocatalytic Activity The Preparation of Nano-Sized Lead Sulfide in High Power Pulse Ultrasonic Reactor Synthesis and Characterization of Mesoporous Silica Nanoparticles Embedded Gadolinium Oxide A Solid-State Reaction Route to Synthesize Crystallinic FeB Nanoflowers and their Magnetic Properties A Novel Method for Preparing High Efficient Fluorescence-Encoded Microspheres with Semiconductor Nanocrystals Influence of Doping Methods on the Gas-Sensing Properties of CuO-SnO2 Sensors Water-Based Polyurethanepolyaniline Conductive Core-Shell Latex Nanoparticles Correlation of Structural and Optical Properties of nc-Ge/a-Si Multilayers Grown by Ion Beam Sputtering Influence of Different Processing Parameters on the Structure of Anodic Aluminum Oxide Membrane Preparation and Characterization of Mg(OH)2 Flame-Retardant with Particular Morphology via Hydrothermal Process Finite Element Analysis of High Pressure Torsion Processing Phase Diagram of the LiCl-MgCl2-Na2cSiO3-H2O System at 150 DegreesC and Synthesis of Hectorite Synthesis of Carbon Nanotubes, Carbon Spheres and Slices of Vertically Aligned Multi-Walled Carbon Nanotubes Characterizations and Crystal Structure of Metallic Ion Doped Titania Nanofiber by Sol-Gel Method Synthesis of CdS Quantum Dots for Detection of Copper (II) Using Fluorescence Spectroscopy CdSe Quantum Dots Decorated by 3-Aminobenzeneboronic Acid as Fluorescence Probe for Glucose Hard-Templating Synthesis of Mesopours La1-xSrxMnO3+ Perovskite and Catalysis Activity in CO Oxidation Synthesis of CdTe and CdTe/CdS Core-Shell Quantum Dots and their Optical Properties Determination of Interdiffusion Coefficient in Nanolayered Structures by Auger Electron Spectroscopical Sputter Depth Profiling Preparation and Dispersion of Polyacrylamide-Grafting Graphene Electron Microscopy Study of Y-Shaped Carbon Fibers with Different Morphologies Complexional Ultrafine Zinc Oxide Powders Prepared by Controlled-Release Precipitation Preparation and Characterization of BCN-TiO2 Nanoparticles Study on Amorphization of Mechanical Alloyed Cu50Zr40Ag10 Alloy Effect of Reaction Temperature on Carbon Nanotubes Numerical Simulation of Dense Phase Pneumatic Conveying Gypsum in Stepped Pipeline Preparation and Characterization of Hydrophobic Mesoporous SiO2 Aerogel Nanocrystalline ZrO2 Porous Ceramics Fabricated by SPS The Electrical and Optical Properties of Al-Doped ZnO Thin Films Prepared by Atomic Layer Deposition Electrodeposition of Au/Brush-Zn Heterojunction Nanowires Comparison on Optical Properties of Cu-Al2O3 and Co-Al2O3 Nano-Array Composite Structure Visible-Light Photocatalytic Activity of the Bi2Ti4O11 Nanorods Repeated Synthesis of MCM-48 Microspheres with a Fixed Ethanol-to-Water Ratio The Influence of the Temperature on the Light-Sensitive Character of WO3 Nanorods Synthesized by the Hydrothermal Method -Ni(OH)2 Flower-Like Spheres and Nanoflakes Synthesized Using the Hydrothermal Method and its Formation Mechanism A Strategy to Produce Single and Double Layer Graphene Sheets Ultrasensitive Chemiluminescence Detection of Indoleacetic Acid Catalyzed by Silver Nanoparticles A Study on Mechanism of Tribological Behavior of Carbon Nanotubes Preparation and Characterization of Cerium-Doped Tin Oxide Gas Sensors Chapter 10: Environmental and Green Materials Photocatalytic Properties of F-TiO2/Ti Photoelectrodes Prepared by Microarc Oxidation Method under Visible Light Illumination Mechanical Properties Simulation of Squeeze Cast Magnesium Alloy Iron Doped Lanthanum Stannate Pyrochlores (La2Sn2-XFeXO7) for the Simultaneous Catalytic Removal NOx and Soot Experimental Research on Mechanical Properties of Coal Paste Filling Material Study on the Kinetics of Phosphor-Gypsum Pyrolysis Ecological Barium-Crystal Glass Based on Thailand Quartz Sands Doped with Zirconium Dioxide The Phosphorus Removal Characteristics of Grain-Slag as Filter Media Electrochemistry Characterization of Ionic Liquid-Type Phosphomolybdic Salt with Modified Electrode Preparation of a Novel Poly-Silicic-Ferric Coagulant from Fly Ash Extract The Research of Fired Grain Slag Brick Multiple Objective Preform Die Shape Optimization Design for Controlling Forging's Shape and Deforming Force during Forging Process Synthesis and Application of an Efficient and Stable Solid Acid Catalyst St-c-AS Suppressing the Powdering of Zirconia Fibers after High-Temperature Application by Large Additions of Yttria A New Treatment Method of Pineapple Leaf Fiber for Textile Use Preparation and Oxygen Intake/Release Characteristics of YBaCo2Fe2O7 Extraction Behavior of Scandium Cation in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and 2-Ethylhexyl Phosphonic Acid-2-Ethylhexyl Ester Anaerobic Biohydrogen Production by the Mixed Culture with Mesoporous Fe3O4 Nanoparticles Activation Study on Solvent Extraction of Fast Pyrolysis Bio-Oil Research Progress in Protective Organic Silane Films Study on the Treatment of Domestic Sewage with Water Quenched Slag Biological Aerated Filter Investigations of Adsorption of 1-Dodecyl-3-Methyl Imidazolium Chloride on Iron Surface as Corrosion Inhibitor Effects of Li2O on Properties of Low Fluoride Content Mould Flux for High Speed Continuous Casting Effect of Kaolin on the Properties of Flue Gas Desulphurization Gypsum-Steel Slag Cementitious Materials The Relationship Between the TiO2 Photocatalyst Deactivation, Regeneration and the Concentration of the Surface Adsorbed SO42- Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Acrylic Acid Experimental Research on Durabilities of Coal Gangue Concrete Synthesis and Characterization of Mesoporous SAPO-11 by Using Carbon Particles The Application of Peroxide in the Degumming Process of Ramie The Key Problems in the Manufacturing of the Bamboo Buffer Packaging Material GGBFS Activated by Tetra-Isopropyl Titanate Floc's Formation and Settlement of Organic Poly-Silicic-Ferric Coagulant Mathematical Modeling and Numerical Simulation of Fouling Processes of Polymeric Ultrafiltration Membrane Study on the Oil-Absorbing Materials with Waste Plastics Analysis of Photo-Degradation of Dyed Veneer by XRD and SEM Research on Strategy-Oriented Management of Environment Performance of County and Municipal Party and Government Leaders Study on Performance of Al-Zn-In-Mg-Ti Sacrificial Anode Study on the Addition of SiO2 into Lithium-Iron-Phosphate Glass Biomimetic Hemocompatible Nanofibrous Scaffolds as Potential Small-Diameter Blood Vessels by Bilayering Electrospun Technique Grafting Sulfoammonium Zwitterionic Brushes onto Polycarbonateurethane Surface to Improve Hemocompatibility Electrochemical Properties of PANI/CNTs Composites Modified by Oxygen Plasma Fluorescent Sensors for Nitroaromatic Compounds Based on the Comb-Like Polysiloxane-Acrylate Flexible and Ordered Macroporous PMMA Polymers Films Synthesis and Characterization of Highly Regioregular Poly (3 - Hexylthiophene) Experimental Study on Uniaxial Time-Dependent Cyclic Deformation of POM/PTFE Blends Preparation of L-Tryptophan Imprinted Polymer Microspheres in Aqueous Media by In Situ Grafting on Surface The Properties and Hydrolysis of Polysiloxanes with Cyanoethyl Groups Synthesis and Application of Molecularly Imprinted Sol-Gel Film for Simultaneous Determination of Multi-Component Pesticide Residue Influence of the Heating Conditions on the Asphalt Compositions by Grey System Theory Relation of 2D Permeability and Preform Structure Parameters Effect of Super-Absorbent Polymer as Admixture on the Mechanical Properties of Mortars Synthesis and Properties of an Amphoteric Superplasticizer Compatible with Sulphoaluminate Cement Effect of Glycerol on the Self-Assembly of P123 in a Room-Temperature Ionic Liquid [Bmim]PF6 Effects of UV Aging on the High-Temperature and Fatigue Performances of Asphalt Mortar Preliminary Study on Asphalt Mortar Containing Shaped-Stabled Phase Change Material Investigation on Static Shear Creep Behavior of Asphalt Mastic Containing Recycled Red Brick Powder Preparation, Characterization and Microwave Absorption Properties of Nano/Micro Carbon Fiber Preparation and Properties of Enzymatic Hydrolysis Lignin Modified Thermoplastic Starch Composites Growth and Magneto-Optical Properties of CaTbAlO4 Crystal Synthesis of Nanocrystalline (W, Ti)C from Respective Elemental Powders by Mechanical Alloying and Spark Plasma Sintering Study on the Preparation and Mechanical Properties of Polystyrene/Y2O3 Composites Catalytic Synthesis of Dioctyl Phthalate over Al-MCM-41 Molecular Sieves Microstructures of Graphite/Copper Composites Prepared by Mechanical Milling and Hot Extrusion The Influence of Solvent Metal Microstructure on Synthetic Quality of Diamond Single Crystals Influence on Activation Property of Calcined Coal Gangue by [SO4]2+ The Effect of Depositing Time on the MPCVD of Diamond on Porous Carbon Monolith Photocatalytic Property of Amorphous WO3 Films Prepared by Reactive Magnetron Sputtering Synthesis and Characterization of Silicone Based Pressure Sensitive Adhesive The Preparation of TiO2 Nanotube Arrays Synthesis and Characterization of Water Based Acrylic Pressure Sensitive Adhesive of Surface Protection Tape

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB07199726
• ISBN:
  • 9783037852040
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 2 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058