Advanced materials and processes : selected papers from the 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011) 16-18 September, 2011, Guangzhou, China

著者

• International Conference on Advanced Design and Manufacturing Engineering
• Guo, Zhongning

書誌事項

Advanced materials and processes : selected papers from the 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011) 16-18 September, 2011, Guangzhou, China

edited by Zhongning Guo

（Advanced materials research, v. 311-313）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

The peer-reviewed papers comprising this book treat the topics of: composites, micro-/nano-materials, metal-alloy materials, steel and iron, polymer materials, optical/electronic/magnetic materials, new energy materials, environmentally-friendly materials, biomaterials, thin films, structural materials, new functional materials, earthquake-resistant structures and materials, smart/intelligent materials/intelligent systems, hydrogen and fuel-cell science, engineering and technology and other related topics. The work offers near-encyclopedic guide to these fields.

目次

Preface, Organizing Committee Composites The Influence of Mechanical Vibration Moulding Process on Thermal Conductivity and Diffusivity of Al-TiC Particulate Reinforced Composites Surface Modification of Carbon Aerogels for LiFePO4 Composites Ultra-Light Photovoltaic Embedded Structures for Solar-Powered Aircrafts Preparation and Properties of PA66/PP/MOS Whisker Composites Fretting Tribology of Cu Matrix Composite Reinforced by In Situ Al2O3 Particle Adaptive Collaborative Optimization Strategy Based on Genetic Algorithm Studies on Low-Velocity Impact Damage of Metal Ion Implanted Composite Laminates Effect of Forging on Microstruture and Mechanical Properties of In Situ TiBw/Ti Composite Fabrication of MgAl2O4 Reinforced Aluminum Matrix Gradient Composites under High Frequency Magnetic Field Relationship Between Interfacial Shear Strength and Interfacial Tension of Silicone/Quartz Glass Fiber Composites Effect of Coupling Agent on Bonding Properties of Wood/Polyethylene Composites Al2O3/Al Composites Consolidated from Alumina and Aluminum Particulates by Reciprocating Extrusion Experimental Study of Energy Absorption Capability of Metallic-Palm Fiber-Metallic Hybrid Composite Plate Mechanical Behavior of Wood Plastic Composites: Effect of Interfacial Compatibilizers Synthesis of NiO@C Composites with Microwave Absorption Property High Strength Aluminum Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes Effect of TiC Addition and Cooling Rate on Mechanical Properties of 316L Stainless Steel Composites Wear Properties of High Volume Fraction SiCP/Mg Composites Produced by Vacuum Pressure Infiltration Friction and Wear Behavior of Polypropylene/Montmorillonite Intercalated Nanocomposites Synthesis and Characterization of Polyimide/Silica Nanocomposites Microstructure and Microwave Sintering Behavior of TiB2/Cu Composites Study on Properties of Ceramic-Lined Steel Pipes Prepared by Centrifugal Self-Propagating High-Temperature Synthesis Foundation of Service Life Prediction Model of Sulfate Attack in Concrete Preparation of Epoxy Resin Composites by Chitosan Modified Montmorillonite Development and Application of High-Valued Wood Products Made of Fast-Growing Poplar A New Preparation Method of Fe-WC Composite Ceramic Powder through Ball Milling Experiments of Infrared Thermography NDT in Composite Materials with Honeycomb Sandwich Structure Study on the Preparation, Structure and Performances of Antibacterial PET Masterbatch Synthesis and Infrared Emisstivity Properties of CdS/ZnS/Al Composite Material with Microemulsions Structure and Infrared Radiation Properties of Metal Oxides-Doped Cordierites Using Graded Sintering Synthesis Dynamic Response Analysis on Efficacy of CFG-Pile in Different Height Embankment Synthesis of Silver Nanoparticles by Using Bamboo Hemicellulose as Template in Aqueous Solution Finite Element Analysis and Experimental Verification on Mechanical Properties of Steel Mash Reinforced HDPE Composite Materials The Preparation of Aluminum-Bronze/Steel Duplex Metal by Loose Sintering Effect of Moisture Absorption on the Bending Strength of Carbon/Epoxy Composites with Voids Chinese Design Recommendations for External Strengthening by FRP Laminates and Related Works in ACI and ISIS Code Provisions Characterization of Wood-Polymer Composite prepared by Muchelia macclurei Wood and Methyl Methacrylate Monomer Research on Glass Fiber Bars of the Shear Property after High Temperature Discussion about Application of Composite Repair Technique in Pipeline Engineering Mechanical and Tribological Properties of Polyimide Composite Reinforced with Carbon Fibers and Carbon Nanotube Effect of Fiber Length on Mechanical Properties of Short Carbon Fiber Reinforced PTFE Composites Influence of Sb on Wear Resistance of In Situ Mg2Si/Al-Si Composites Research on Electrical Double Percolation of Carbon Black-Filled Cement-Based Composites Tensile Behavior of Textile Reinforced Flexible Composites with Single Edge Notch (SEN) under Static Solicitation Finite-Element Simulation of Residual Stress in Zirconia Thermal Barrier Coating Measurement of Transverse Permeability of Fabric Preforms Using Ultrasound Monitoring Technique in LCM Processes Based on the PB Neural Network of Optimization Design in Lubricant Additives Effects of Process on Electrochemical Properties of Pulse Electrodeposited Ti/Pb-WC-PANI Inert Electrodes Optimizing Design of a Balance Weight Unit for Compensating POS Unbalanced Moment in an Aerial 3-Axis ISP System Underwater Acoustic Radiation Prediction Based on Improved SEA Method and Hybrid FE-SEA Method Formation of the Intermetallic Layers in Ti-Al Multilayer Composites Experimental Study of Cutting Parameter for Drilling on Fabric Carbon/Epoxy Laminates Studies on Preparation and Properties of PVDF-g-PAMPS Membrane A Hybrid-Stabilized Solid Element for Piezoelectric Laminated Plate Analysis Analysis of Stresses for Cross-Ply Laminates with Multiple Matrix Cracks under Bending Mechanical Properties of Kenaf - Unsaturated Polyester Composites: Effect of Fiber Treatment and Fiber Length A Domain Ontology-Based Knowledge Organization Model for Complex Product Design Study on Properties of Carbon Particle Modified Silicon Carbide Composite Ceramics The Evolution of Heat Treatment on the Tensile Properties of Na-Modified Al-Mg2Si In Situ Composite Thermal Conductivity of the Diamond-Cu Composites with Chromium Addition Safety Investigation and Analysis for Highway Tunnel Entrance Pavement The Study of Power Ultrasonic Vibration Cutting Heat Study on Multi-Axial Mechanical Properties of a Polyurethane Foam and Experimental Verification Impact Analysis of Aluminum-Fibre Laminated Composite Reinforced Mineral Particles by Surface Coating Study on the Preparation of Ni-P-TiO2 Coatings by Electroless Plating and its Photocatalytic Properties Investigation of Phase Composition and Microstructure of the FeAl/Al2O3 Composites Fabricated by Mechanical Alloying and Hot-Pressing Process Complexing Agent on the Surface of Magnesium Alloy Plating of Ni-B Alloy Preparation and Basic Properties of Three-Ply Kevlar Fiber/Epoxy Composites Preparation and Properties of Polyvinyl Chloride/Nitrile Butadiene Rubber/Barium Sulfate Composites Modified Singh-Mitchell Creep Model for EPS Composite Soil Preparation and Study of Novel Nano-Composite Coatings on the Surface of Plastic Moulds Micro/Nano Materials Ethanol Sensing Properties of Tungsten Oxide Nanocubes Prepared by a Urea-Assisted Hydrothermal Method Modal Analysis Theories and Methods for Bridge A Method of Dual Number for the Aerodynamic Property Analysis of Gas-Lubricated Mechanism:Self-Pressurizing Thrust Bearings and Non-Contacting Face Seals Electrochemical Synthesis and Characterization of NiFe/Au Multisegmented Nanowires Preparation and Performance Testing of Chitosan-Ibuprofen Sustained Release Microspheres Direct Synthesis of Yttria-Stabilized Zirconia Nanopowder by Thermal Decomposition Performance Study of Aerostatic Bearings with Arrayed Microhole Restrictors Thermodynamic Analysis of the Extension of Solid Solubility of the Cu-Cr System Processed by Mechanical Alloying Experiment Study on a Novel Foam System for Enhanced Oil Recovery Design of Sample Holders for Soil Experiments Using THz Spectroscopy Visible Light Photocatalytic Activity of Zn-Doped Bi-Mo Complex Metal Oxide Prepared by Hydrothermal Synthesis Method Performance of Vanadium Oxide on Multi-Walled Carbon Nanotubes/Titanium Electrode for Supercapacitor Application Effects of Irradiation on Chitosan-Coated Nanoparticles for Hyperthermia Catalytic Combustion of Toluene on Cu-Mn Complex Oxides Prepared by Urea-Based Hydrothermal Method Rapid Detection of Shellfish Major Allergen Tropomyosin Using Superparamagnetic Nanoparticle-Based Lateral Flow Immunoassay Influence of Oxygen Donor Alcohols on Non-Hydrolytic Sol-Gel Synthesis of MgAl2O4 Spinel Nanoparticles Study on the Relation between Electrospinning Fiber Diameter Distribution and Taylor Cone Dynamics Structure and Tensile Properties of Nano-Filament Knitted Fabrics by Alkali Treatment Synthesis of Self-Assembly Au Nano-Particles Based on Sodium Citrate-Tannin Reduction Method The Study of Shrink Fit Design Empirical Formula High Performance Cu-Based Friction Material Reinforced by Nanometer Materials Hydrothermal Synthesis and Electrocatalytic Property for H2O2 Reduction of Co3O4 Nanocubes Electrochemical Polymerization and Characterization of Poly(3-Methylthiophene) in Pure Ionic Liquids Fabrication of Nanosheets and Micro-Spheres from the Self-Assembly and Polymerization of N-Octadecyltrichlorosilane Determination of Optimal Cold Reduction Ratio and Annealing Process of High Plastic Stain Ratio Structural Cold Rolling Steel Sheets Preparation and Test of Hierarchical -Ni(OH)2 Flowers and Spheres Growth of Nanostructure on Cu0.62Zn0.38 after SMAT during Thermal Oxidation Study on Application of Nanosilica in Paper Coating The Influence of Tin Ions on the Thermal Property of -FeOOH Nanorods Constitutive Modeling of Nanocrystalline Materials with Shear Band Effect of Grain Rotation on the Strain-Softening Behavior in Nanocrystalline Materials Dispersion Investigation on Cobalt Blue in Organic Solvent First-Principles Study of Triangle Terarylene as a Possible Optical Molecular Switch The Changes of Hysteresis for Nanocrystalline BaTiO3 Ceramics at Different Impressing Rate of Voltage Preparation of Microfibers with Multi-Hollow Structure by Co-Electrospinning Synthesis of Hierarchically Porous ZSM-5 by Solvent-Evaporation Route Low-Temperature Molten Salt Synthesis of NiWO4 Nanoparticles Research on Preparation, Characterization of Novel Nano-ZnO Finite Element Simulations of Crack Initiation in Ultra-Fined Polycrystalline under Cyclic Deformation Comparative Study of Physicochemical Properties of Dragon's Blood Powders Study on Hydrothermal Synthesis of Flower-Sphere MoS2 Synthesis and Characterization of Polyacrylonitrile Microspheres by Soapless Emulsion Polymerization Seed-Mediated Synthesis of one-Dimensional Fe3O4 Particles under Magnetic Field Metal Alloy Materials Effects of Strain Rate and Heat Treatment on the Tensile Property of 1Mn1Zn4Y Magnesium Alloy Compressive Flow Behavior of AZ61 Mg Alloy at Elevated Temperatures Effects of Element Yttrium on the Microstructure and Mechanical Properties of as-Cast Zn-25Al-5Mg-2.5Si Alloy Rheological Constitutive Model Depending upon Temperature and Strain Rate of Sheet TC1 Titanium Alloy Effect of Rotating Magnetic Field on Microstructure Evolution of Pb-Bi Alloys Effects of Annealing Technique on Texture Attenuation of Hot-Rolling AZ31 Magnesium Alloy Sheets Failure Analysis on Tee Joint Crack of Subcritical Power Station Boiler Final Superheater Header A Study on the SCC Susceptibility of Twin-Wire Metal Inert Gas Arc Welds in 7A52 Al Alloy Plate Study on CPM9V High Speed Steel Ring Prepared by Spray Forming Oxidation and Melting Characterizations of AZ91D Granules during In Situ Melting Influence of SiC Particle Size on the Wear Properties of SiC/Cu Composites Study on the Super-Plastic Property of ECAPed Magmesium Alloy Research of Aluminum Reduction Cell Thermal Balanced Intelligent Control System Effects of Solidification Time on Porosity Content in A201 Aluminum Alloy Castings An Investigation on a New Type of Fe-Ni Alloy in MIM Process The Effect of PH on the Efficiency of Isoniazid as Corrosion Inhibitors of Brass in 3.0% NaCl Solution High Temperature Salt-Fog Corrosion Behavior of a Ni-Based Super Alloy Microstructure Refinement by Y2O3 in Semisolid A356 Alloy Microstructure and Properties of Zn-Al Filler Metal Brazing Cu/Al Joint Investigation of Gas Nitriding on Wear and Corrosion Behavior of 40Cr Steel Smelting of Al-Li Alloy Containing High Li by Micro-Gravity Electromagnetic Force Simulation Facilities and Texture Study Modeling of Cyclic Super-Elastic Behaviors of Shape Memory Alloy Hot Deformation Microstructure and Mechanical Properties of Mg-Zn-Nd-Cd-Zr Alloy Microstructures and Mechanical Properties of Mg-Al-Zn-Y Alloys Effect of Cladding Material on Residual Stress in Quenched Aluminum Alloy Plate Preparation of Semisolid A356 Al Alloy Slurry by Low Superheat Pouring and Weak Traveling-Wave Electromagnetic Stirring Influence of Different Titanium Alloying Methods on the Microstructure and Wear Behavior of ZL108 Alloy Modeling of Flow Stress for one New Kind of Metastable Titanium Alloy at High Temperature Experiment Study on Disrepair Principle for the Waved-Edge Milling Insert with Complex 3D Grooves Modeling and Experimental Study on Static Characteristic of BT Tool Holder-Spindle Interface Oxidation Resistance of Co-10Cr-5Si Alloys in 1 Atm of Pure O2 at 700 and 800 OC Regression Analysis and Determination of Activity Coefficients of Cd-Pb Alloy Determination of Phase Transformation Point of New Type Ti-5Al-3.3V-8Mo-10Nb-1.0Zr-0.5Cr Alloy Research and Implementation on Variant Design Based on Product Assembly Model The Solute Redistribution during Solidification of Multi-Component Alloys Calculation of Valence Electron Structure of Precipitate Phases in Al-Cu Cast Alloy Negative Thermal Expansion of Tm2Fe15SiCr Compound Modeling and Error Compensation of MEMS Gyroscope Dynamic Output Data within the Whole Temperature Range Evolution of Microstructures and Mechanical Properties of Sr and Ca Containing Mg-4Al Alloy during Annealing Heat Treatment Study on the Similar Creep Behaviors and Mathematical Laws of 1Cr18Ni9Ti under Low Stress Repeated Impact The Study on Microstructure and Properties of a New Metastable Beta Titanium Alloy after Aging Treatment An Adaptive Changeability Approach of Flow Path Feature in Hydraulic Manifold Blocks Design Influence of Precipitate Phase on the Strain Rate Sensitivity of Mg-Gd-Y Alloy Electrochemical Preparation of Ce-Mg-Ni Alloy Film in Acetamide-Urea-NaBr Melting System Research on Corrosion Behavior of Fe-B Eutectic Alloy in Liquid Zinc Distortion Analysis on Multipassed Butt Weld Using FEM and Experimental Study Steel and Iron Influence of Nitrogen Content on the Microstructure and Precipitate of the Medium-Carbon Vanadium Microalloyed Steel Comparison of Crack Growth Models and Crack Closure Effect Puncture Needle Production Process Intelligent Control System Based on Machine Vision Study on Relationship of Abnormal Heat Treatment, Microstructure and Properties of P91 Steel Effect of Rare Earth Elements on Corrosion Behavior of Low Carbon Steel in CSP Effect of Prestrain on the Fatigue Crack Initiation life of X60 Pipeline Steel Influence of Rapid Cooling Temperature on the Microstructure and the Mechanical Properties of a High Al Dual Phase Steel Sintering Pot Test on Improving TiO2-Containing Ore's Allocated Proportion The Improvement of 13MnNiMoNbR Weld Strength and Low Temperature Toughness Effect of Vanadium and Niobium on the Microstructure of Carbide Reinforced Indefinite Chilled Cast Rolls Casting Low-Carbon Alkaline Agent of Tundish Corrosion Study on X70-Carbon Steel Material Influenced by Soil Engineering Properties Study on the Cleanliness of 316L Stainless Steel Influence of Cooling Rate on the Microstructure of Bainitic Steel Experimental Research on the Novel Process of Iron Ore Direct Reduction by Coal Gas Research on Industrial Shape Meter and its Application Shape Detecting and Shape Control of Cold Rolling Strip Stress Field Numerical Simulation of the Inclusions in Large Rudder Arm Steel Casting Microstructure Evolution and Precipitation Behavior of a High Nitrogen 15Cr Martensitic Stainless Steel during Tempering A Study on Modified Maximum Force Criterion to Predict Forming Limit Curve of Stainless Steel Sheet Two-Section Model for Adsorption of Tinidazole on Carbon Steel Surface in 3%HCl Solution Mechanism of Work Hardening of Mn13 after Conventional Cold Rolling Effect of Vanadium on Microstructure and Mechanical Properties of Air Cooled Medium Carbon High Silicon Bainite Steels Research on Thermal Stress of Slab Heating Process Based on Transient Non-Linear Analysis Influence of Annealing Temperature on Properties and Texture of High Strength IF Steel The Effect of Co and Cu on the Creep Properties of High Chromium (12%Cr) Ferritic Steel Effect of Nitrogen on the Impact Toughness of the Bearing Steel GCr15 Research on Temperature Changes and Microstructure Evolution of Steel Target after the Penetration by Copper Jet Corroded Behavior of 310S Stainless Steel in Molten Al-Si Eutectic Alloy Effect of Additives on Desulfurization Capability of CAS-OB Refining Ladle Slag Comparison of Effects of B2O3 and CaF2 on Metallurgical Properties of High Basicity CaO-Based Flux Fracture Images Classification Based on Fractional Cosine Transform and Markov Mode The Effect of Quenching Media on the Microstructure and Mechanical Properties of SA508-3 Steel Geometric Errors Sensitivity Analysis of Precision Vertical Machining Center Based on Multi-Body System Theory Consistency Maintenance of Collaborative Product Design Based on the Semantics Reasoning Exploration of Environmental Education on Campus-Huanggang River Watershed Protection in Case Effects of Temperature on Corrosion Behavior of X70 Steel in Halons Research on Product Knowledge Manipulation in KBE Application for Improving Product Design Effect of Chemical Composition on Quenching Hardness of 1Cr17Ni2 Stainless Steel Experimental Investigation of Static Characteristics of a Vacuum Preloaded Aerostatic Bearing Study on the Interaction of Rare Earth (La) and Strontium with Titanium and Boron in the Al-Ti-B Based Master Alloy Studying the Structure and Semiconductor Properties of Passive Film on 316SS by XPS and Capacitance Measurement On the Dynamics of the Micro-Ring Driven by Traveling Bias Voltages Formation Conditions for Ce2O2S and CeAlO3 in Cerium Treated Al-Killed Steels Polymer Materials Study of Thermal Stress of Iron-Boron Alloy Casing Application and Study of Reactive Polyacrylate Microgel in Pigment Paint of Printed Fabric Research on Some Key Issues of Dynamic Simulation for Workflow Process Preparation and Properties of Rigid Cross-Linked PVC Foam Selenium-Containing Curcumin Polymer for Anti-Liver Fibrosis Studies on Thermal Stability and Rheological Property of PU/PVDF Blend Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive Adsorption Performance for Ag( ) of an Ethoxycarbonyl Thiourea Chelating Resin Effect of Temperature and Frequency on Dynamic Mechanical Properties of Poly(Methyl Methacrylate) Synthesis and Properties of Waterborne UV Polyurethane The Residual Stress Research of Rolling Slab Based on the No-Linear Elastic and Plastic Analysis Investigation of Application Conditions of Barium/Strontium Scale Inhibitor in Oilfields Structure Design and Properties of Porous PVDF Membranes Based on Ionic Liquid Research on the Modification of Poly(L-Lactic Acid) by Glucose via Direct Melt Polycondensation Analysis of Entrance Converging Flow of Polymer Melts. A Comparison between Liang Model and Cogswell Model Effects of Vibration Force Field on Extensional Stress of Polymer Melt in Contraction Die Improvement of Feeding Mechanism of Printing Machine Synthesis of a Novel Cationic Polyacrylamide and Its Application in Flocculation The Effect of Content of Castor Oil on Two-Component Castor Oil Based Polyurethane Adhesive Characterization on Aggregating Structure of Aloe Extract Crosslinked Cotton Fabric Rubber Modified Asphalt Storage Stabilizer Option Design of Floating HPMC Matrix Tablets: Effect of Formulation Variables on Floating Properties and Drug Release Properties of Polycrystalline BaTi2O5 Substituted with MgO Prepared by a Floating Zone Method Relationship between Technics and Properties during PAN Precursors Formation Process Remove Rhodium Catalysts from HNBR Solution Study on Viscosity of Poly(Acrylic Acid-Co-Acrylamide) Concentrated Solution with Different Potential Crosslinking Agent Synthesis of ABC Star-Shaped Copolymers via a Combination of Controlled Polymerization Techniques Data-Compensation Based Dynamic Robust Design for Partially Unknown System Study on Preparation of NR/BR Table Tennis Bat Rubber Comparison of the Friction and Wear Properties of PTFE Coatings under Vacuum Conditions before and after Gamma Irradiation Research on the Influence of the Road-Friendliness by Semi-Active Suspension A Research on Modification of Paper-Based Functional Polyurethane Material Research on Polymerization Processes of Cationic Polyacrylate Emulsion and its Optimization Safety Design of Ammunition Screw Dismantlement Based on Temperature Control Knowledge Based Plastic Mold Cavity Design and Manufacturing System Optical/Electronic/Magnetic Materials Effects of Annealing Treatment and Buffer Layer on Properties of ZnMgO Films Prepared on Diamond Substrates Properties of CdMnTe Single Crystal Used in Nuclear Radiation Detectors Application of Three-Dimensional Fluorescence Spectrum Method and PARAFAC in Petroleum Pollutant Measurement and Identification Significant Suppression of Photoluminescence in Eu3+ Doped LaPO4 Inverse Opal Photonic Crystals A Novel Blue-Emitting Phosphor MgAl(PO4)O: Eu2+ for White LEDs Preparation and Upconversion Luminescence Properties of Tb3+-Yb3+ Co-Doped Phosphate Inverse Opals Experimental Study on Temperature External-Characteristics of Ni-Mn-Ga Shape Memory Alloy Effect of Seed Layers Prepared by Vertical Deposition Method on the Growth and Properties of Oriented Polycrystalline -HgI2 Films Magnetic Properties and Structures of HDDR Nd2Fe14B-Based Magnet Expanded Graphite/Carbon Nanotube as Counter Electrode for DSSCs Effect of Bi2O3 Addition on the Physical and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3 -( Na0.5Bi0.5)TiO3 Ceramics Optimal Design of Inlet Structure of High-Pressure Tubular Reactor Jacket Research on Annealing Temperature of SiO2 on Si Substrate The Synthesis and Characterization of SrTiO3 Film Fabricated by Micro Arcoxidation The Study on the Structural and Optical Properties of C-F Codoped Zinc Oxide from Ab Initio Calculations Effect of Thickness on the Structural, Electrical and Optical Properties of ZnO Films Deposited by MBE Preparation and Properties of N-ZnS Film/P-Si Heterojunction Effect of High-Energy Ball Milling on Microstructure and Microwave Absorbing Properties of NdFe Material Synthesis and Optical Properties of 2-(1H-Imidazo [4,5-] Phenazin-2-yl) Phenol Derivatives Milling Force Predicting Modeling and Analysis for Helical Tooth End Mill on Inside Corner Synthesis of Single-Phase Nanocrystalline YIG by Co-Precipitation: The Influence of pH Value of Precursor Solution and Calcinating Design and Analysis of One-Dimensional Nanostructure on Amorous Silicon Solar Cell for Surface Reflectance Reduction Study of Dynamic Characteristic of Friendship Avenue Bridge Calcium Lanthanum Permanent Magnetic Ferrite Coupled with Soft Magnetic Ferrite ESPI for the Piezoelectric Constant Measurement Research on the Hydrology Telemetry System of Poyang Lake Based on GPRS Thermally Induced Pitch Gradients in Side-Chain Cholesteric Liquid Crystalline Polymers Synthesis and Photoluminescence Properties of the Novel Red Phosphor Gd2MoB2O9: Eu Nucleation Agent Choice of Li2O-Al2O3-SiO2 Glass Ceramic Having Ideal Micro Spherical Crystal Grains The Design of Electroporation Device Based on Dielectrophoresis with its Application on the Control of Monoplast The Effects of Magnetic Field on the Deposited Performance of CrN Films by Magnetron Sputtering New Energy Materials The Study of Hydrogen Sorption Properties of Mg17Al12La0.45 Test Method of Fiber Optic Gyroscope Based on Allan Variance Electro-Oxidation of Ethanol on the Preparation of Electroless Ni-P Alloy Electrode High-Temperature Performance of Amorphous Nickel Hydroxide Coated with La(OH)3 Research on FEA and Optimizing for Structural Design of Pipelayer' Boom Investigation on Structure and Electrochemical Properties of MgNi+x%B (x=0,2,5,10) Hydrogen Storage Alloys Multi-Objective Optimization Design of Complex Mechanical and Electrical Products Based on Improved Evolutionary Algorithm Preparation Development of High-Quality Solar-Grade Multi-Crystalline Silicon by Directional Solidification A Study on the Electrochemical Properties of LiFePO4 Doping with Different Diameter MWCNTs Study on the Pair's Characteristics of Web Press's Fold System in High Speed Distribution of NiO/Al2O3/NiAl2O4 in the Fabrication of Spray-Dry Oxygen Carrier Particles for Chemical-Looping Combustion Traction Transmission Gearbox Mechanical Properties Numerical Calculation and Strength Analysis Design of Holmium Laser Treatment Instrument Control System Research on Electrochemical Properties of Alpha-Ni(OH)2 Prepared by Electrodeposition Method in the Ethanol and Water System Environmental Friendly Materials Synthesis, Characterization and Performance of Ce0.8La0.2O1.9-ATP Composite Catalyst for Phenol Catalytic Oxidation Application of Irradiation Process for Surface Grafting and Copper Removal Smooth B-Spline Curves Extension with Ordered Points Constraint Preparation of Activated Carbon Supported Nano-TiO2 Photocatalyst Material and its Application in Papermaking Midcourse Wastewater Study on Thermal-UV Curing Process of Waterborne Dual Crosslinkable Coating Material Effect of Ti on Corrosion of Cast AZ91 Magnesium Alloy A Visual Tracing Control Platform Based on Multi-Axis Linear Drive Application of Error Design Idea to Deal with the Shafting Error of Photoelectric Theodolite Modeling and Analysis of the Transmission Characteristics of a Geared Linkage Mechanism Dielectric Properties and Diffuse Phase Transition of Sol-Gel Derived 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 Ceramics The Simulation and Experimental Research on Gas Cooler of the CO2 Trans-Critical Cycle A Double Imprinted Organic-Inorganic Hybrid Sorbent for Selective Separation of Lead from Aqueous Solution Recycling of Thermosetting Epoxy Molding Compound Waste into PVC Composites: Effect of Silane Coupling Agent on Morphology and Physical Properties Detection of Infected Tephritidae Citrus Fruit Based on Hyperspectral Imaging and Two-Band Ratio Algorithm Study on the Effect of Curing Conditions on Hydrate Properties of Fluorgypsum by Semi-Dry Pressing Utilization of Desulfurized Ash as a Modifier in Fluoride Retention and Deacidification of Fluorgypsum Lignin Separation and Antioxidant Capacity from Acanthopanax senticosus Remainders Using Acetic Acid-Water System Environment-Friendly Cottonseed Protein Bioplastics: Preparation and Properties Removal of Formaldehyde Using the Aminated Activated Carbon by Etilenodiamina Studies on Burning Process of Clinker Used for Corrosion-Resisting Cementitious Material in Fill Mining Kinetics of the Adsorption for Naphthol Green by Epichlorohydrin Modified Peanut Shell Fabrication and Properties of Lignin/Castor Oil-Based Composites A Hybrid Interaction Method with Virtual Hand Design of New Condition Monitoring System and Data Analysis in Large Forging Die Hydraulic Press Study on the Coexistence of Porous Ecological Concrete with Plants The High-Temperature Corrosion of Fe-Cr-Mo Alloy by Co-Firing of Coal and Biomass Research of Wheat Precision Seeding Test System Based on Image Processing The Optimization Design of New Type F-Nail Nailing Machine Research of Chinese Buddhist Temples Space Design Research on Process and Pollution of Atmospheric and Vacuum Distillation Punching Force of Cold Die of Fuzzy Reliability Considering the Random Distribution of Material Properties Using Cow Bone Char for Improvement of Domestic Water Quality in Chiang Mai, Thailand Evaluation on the Blast Resistance of Fiber Reinforced Concrete Robotic Cross-Lines Laser Indicator and Range Finder Study on Scattering of Left-Handed Materials Elliptical Cylinder Survey and Evaluation of Concrete Durability for 40 Sluices in Coastal Area, East China Response of Ultrasonic Wave Velocity to Wood Structure Defect of Korean Pine Study on the Adsorption of Copper Ions by Bentonite Biomaterials Synthesis of Hydroxyapatite Powder from Mollusc Shell Herbal-Loaded Multifunctional Nanocomposities as Nanocarrier for Cancer Therpy: Synthesis and Quality Preparation and Application of a Stable Biomembrane Mimetic Coating Study on Permeability Coefficient of Different Bamboo/Fir Veneer Surface Preparation and Characterization of PCL/PVP Blend Membrane Rate Optimization Congestion Control Protocol for Wireless Sensor Networks Investigation on Surface Crack of C38N2 Automobile Engine Crankshaft Effect of Concentration on Structure and Properties of Concentrated Regenerated Silk Fibroin Solution Design of a Reconfigurable Modular Underwater Vehicle A Powerful Discovery Procedure for Large-Scale Significance Testing, with Application to Comparative Microarray Experiments in Response to Different Biomaterials Design and Research on Mechanical Properities of New Type Low Modulus Biomedical Metastable Titanium Alloy Energy Conservation Study during Abrasive Water Jet Cutting Error Correction of Theory Model in Process-Stress Accelerated Test Hydrothermal Synthesis of Hydroxyapatite Urchins and its Drug Release Property Bending Deformation Measurement of Bone Cantilever Using Image Correlation Study for Seeking Optimal Mix Proportion of Resin Concrete Fabrication of Polycaprolactone/Chitosan Scaffolds by Freeze-Solvent Extraction Method The Microstructure and Tensile Property of Mg-Zn-Ca-Zr Alloy Sheet Coated with HA and its Antihemolytic Ability Antioxidiation of Extract of Chinese Quince on Oil Preparation of Hydroxyapatite Powders via Neutralization Process Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method Modification Mechanism of the ZTA Ceramic Powders with Stearic Acid Preparation and Characterization of Bone-Like Apatite Coating on Ti6Al4V Spinal Fusion Devices Multiple Modifications on Carbon Fiber Surface and Effects on Microorganism Immobilization Microstructure, Mechanical Properties and Corrosion Behavior of Mg-1Zn-0.5Ca Alloy Effect of Size on Degradation of Porous Poly(Lactic Acid) Scaffold Preparation and Characterization of Silver/Hydroxyapatite Nanoparticles Preparation, Characterization and In Vitro Evaluation of IVM Loaded Poly(lactic-Co-Glycolic Acid) (PLGA) Microspheres Impact of Sterilization Methods on the Stability of Silk Fibroin Solution Thin Films Influence of Chitosan on Electrospun PVA Nanofiber Mat A Study on Tensile Properties of NiCoCrAl/YSZ Multiscalar Microlaminate Investigation of Effect of Chemical Etching and Temperature on Optical Properties of Porous Silicon Layer Low-Temperature Ni Acetate Induced Crystallization of a-Si Thin Film by Microwave Annealing The Preparation, Texture and Electrodeposition Mechanism of Reticular MnO2 Catalytic Materials with High Porosity Study on Coloring Protective Composite Oxide Film on Aluminum Surface Si3N4 Double Passivation Methods for Optimizing the DC Properties in a Gamma-Gate AlGaN/GaN HEMT Using Plasma Enhanced Chemical Vapor Deposition Study on the Heat Sealable Property of Biaxially Oriented Polyester Film Surface Modification of PET Films by Vapor-Phase Photografting Acrylic Acid and its Application to Electroless Copper Plating Non-Uniform Simplification of Point Clouds Microstructure and Nanoindentation Hardness of Sputter Deposited Nanocrystalline Tantalum Thin Films Coating Technique's Application in the Improvement of Mechanical Behavior of Polyester Textile in Corrosive Environment Effect of Nano-Sized ZnO Particle Addition on PVDF Ultrafiltration Membrane Performance Review of Working Performance Modeling and Optimization of Cone Crusher Stress Migration Induced Formation of Voids / Hillocks in Tungsten Films Effect of Airflow on Performance of Splicing Fiber under Different Chamber's Inlet Pressure Mechanical Properties of Concrete with Aggregate Type at Elevated Temperature Study on a Kind of Rust-Transforming Technology Synthesis of the Water-Compatible P-Aminophenol Resin and its Adsorption for Salicylic Acid Structure Materials Experimental Research on Effect of Hot Works on Mechanical Performance of Ship Steel Plate Skip Neighborhood Hybrid Particle Swarm Optimization Algorithm Research on Overconstrains of Planar Mechanisms Microstructure and Mechanical Properties of as-Forged Ti-47Al-2Cr-2Nb-Y Alloy Experimental Study and Performance Analysis of Concrete Shrinkage-Reducing Agents Static Performance Analysis on Combined Truss with Steel Tube and Concrete-Filled Steel Tube Based on Total Strain Crack Constitutive Model Finite Element Analysis on Static Performance on Combined Truss with Rectangular Steel Tube and Concrete-Filled Steel Tube Influence of Early Age Wet Curing Time, Clinker and CaO Content on the Carbonation Resistance of C40 Ordinary Concrete Effect of Isothermal Holding Parameters on the Solid Particles Evolution of Semisolid AZ91D Alloy Produced by SIMA The Influences of TiN Content on the Properties of the In Situ Al2O3-TiN Composites The Variables Reduction for Concrete Strength Prediction Model Using a Rough Sets Method Relationship between Thickness of Lamellar + Phase and Mechanical Properties of Titanium Alloy The Effect of Aluminum Clad on the Electrochemical Properties of the Similar Weld of Friction-Stir Welding of 2524 Modeling of Pressure Drop in a 3-D Network Ceramic Diesel Particulate Filter Distribution Character of Structural Stress for Aluminum Alloy Thick Plate Prediction of the Tension Softening Curve of Dam Concrete Based on BP Neural Network Assesment of Main Models for Predicting Debonding Load-Bearing Capacity against Intermediate Crack-Induced Debonding Failure in FRP-Strengthened RC Beams Assesment of Proposed Models for Determining Allowable FRP Tensile Strain for Mitigation of Debonding Failure in FRP-Strengthened RC Beams Study on CO2 Sequestration Property of Cement Based Composite Cementitious Materials Containing Steel Slag Used in Road Simulation Study on Heat Insulating Material Used in Refrigerated Cargo Hold Shipboard of Fishing Vessel Electromechanical Coupling Coefficient of SAW on Proton-Exchanged and Annealed LiNbO3 Waveguides Numerical Simulation of Embedded and Co-Cured Composite Damping Structure under Low Velocity Impact Microstructure Formation with the Elastic Interactions of Internal Stress and Applied Stress Extenics Decision Model for Evaluating Mechanical Joint Interface of Reconfigurable Machine Tools The Strength Reliability Analysis of Periodically Symmetric Struts Supports of Gas Turbine Based on Monte-Carlo Method New Functional Materials Analysis on Properties of Water-Based Fire-Retardant Nano-Coatings Properties of Autogenous Shrinkage in High-Strength Mass Concrete According to Hydration Heat Velocity Effect of Anisotropic Membrane Surface Modification of Nafion Based Ionic Polymer-Metal Composites Aging Behavior of Cu-Cr-Zr-Y Alloy Integrated Design of Hydrostatic Slideway Driven System Strain Hardening Modeling of High-Strength Stainless Steel Tube A Simulation Study for the Influence of Pulse Heating on Thermal Imaging of Carbon Fiber Composites Preparation of Terminal Phenolic Hydroxyl Triazine Dendrimer and its Combination Tanning Properties with the Aluminum Salts Influence of Pulsed Current Annealing on Giant Magneto-Impedance Effects of Co Based Amorphous Ribbon Some Research on the Magnetic X Zeolite Composites Preparation and Research of Phase Change Material Based EVA / Binary Fatty Acids Composite The Progress in Research on Silk Fibroin Blend Membranes Microstructure and Mechanical Properties of 3D Needled Carbon Fibre Reinforced Carbon and Silicon Carbide Composites Experimental Investigation Contrast to Coal Dust and FS Powder Application Surface Modification for Cotton Fiber and its Antimicrobial Characteristics Effects of Heat Treatment Condition on Properties of Strontium Barium Niobate Based Glass-Ceramic for Energy Storage Capacitors Study of Cellulose-Dibutyl Sebacate Copolymer Synthesis and Characterization of Crosslinked Cellulose-Dibutyl Sebacate Copolymers for Oil Absorbency Preparation of the Microsphere-Sized Poly(N-Isopropylacrylamide) Hydrogel Dispersed in Poly(Vinyl Alcohol) Matrix and its Thermo-Responsive Releasing Behavior Enhanced Photoelectrocatalytic Degradation of Azo-Dye Pollutants Using Transparent Titania Nanotube Arrays Glass Electrode Microstructure and Wear Behavior of Ti-Matrix Functional Gradient Layer Synthesis and Characterization of New Functional Material (C6H5CNH2nNH3)2PbI4(where n=0,1,2) The Efficient Synthesis of 1,3-Diallyloxy-2-Propanol without Solvent Hydrothermal Synthesis and Ferromagnetic Properties of Mn-Doped Na0.5Bi0.5TiO3 Crystals Influence of Different Extraction Methods of Tea Polyphenols on Proportions of Catechins Synthesis and Electrical Properties of Mo-ZrO2 Cermet Investigation of Initial Bubbles of CO2 Injected into Polymer Melt Study on Microstructure and Corrosion Behavior of Ag-Cu-Zn-Ni Alloys Performance Evaluation of High-Modulus Asphalt Mixture Cone Calorimeter Analysis on the Fire-Resistant Properties of FRW Fire-Retardant Particleboard Preparation and Characterization of Organic-Inorganic Hybrid Perovskite (C6H5CH2NH3)2CuCl4 Effect of Composite Shape-Stabilized Phase Change Material on Asphalt Mixture Temperature Earthquake Resistant Structures and Materials The Study of the Large-Sized High-Quartz Translucent Porcelain Plate Catastrophic Analysis of Seismic Response of Gravity Dam Sliding along Base Surface Transient Analysis of Flow Field in Cylinder of an Engine The Research of Evaluation for Product Conceptual Design Based on ANP and Fuzzy Theory Investigation on Innovative Design Method of Vehicles Modeling of Passive Adaptive MR Damper Experiment Research and Numerical Simulation of an Innovative Seismic Isolating System Designed for Long-Span Continuous Girder Bridges Study of Cylinder Liner Based on Ultrasonic Plateau Honing Experimental Research on Four-Tube Concrete-Filled Steel Tubular Laced Columns Smart/Intelligent Materials/Intelligent Systems Design of a Piezoelectrically Actuated Jumping Robot Study on Effect of Relief Groove Angle Expressing the Position in Reducing Noise of Swash Plate Axial Piston Pump Effects of Temperature, Relative Humidity and Washing Times on the Electrical Conductivity of Carbon-Coated Filaments The Design of Combustion Control System Based on Fuzzy Immune Internal Model Controller Thermal Post-Buckling Improvements of Laminated Composite Plates Using the Active Strain Energy Tuning Approach Coordination Needs and Performance for Manufacturing Process Improvement Projects Design and Analysis of MR Damper with Radial Duct for Tracked Vehicle Suspension Microstructure and Mechanical Properties of Mg-RE-B Alloys Preparation of Brunet Reflective Exterior Insulation Coating Dynamic Coupling Hysteresis Model for Giant Magnetostrictive Materials Preparation of Monodisperse Poly(N-Isopropylacrylamide) Microgels with -Cyclodextrin Moieties Study on Diesel Engine Fault Diagnosis Based on Integration of Bayesian and Genetic Neural Network Method Modeling of Electrical Resistivity Evolution Using Free Energy Analysis for NiTi Shape Memory Alloy Wires Semi-Active Control of a Vehicle Suspension Based on Magneto-Rheological Damper The Research on the Preparation of Sodium-Poly-Methyl-Acrylic and Sodium-Alginate Blend-Micro-Spheres and its Form Experiments and Analysis of Bending Dielectric Elastomer Actuator Damage Evaluation in Smart Materials Using Time-Frequency Analysis Hydrogen and Fuel Cell Science, Engineering & Technology Performance of Ba0.5Sr0.5Co0.8Fe0.2O3- -Ag Composite Cathode Materials for IT-SOFCs Polynomial Based Elasticity Solutions of Beams and their Numerical Validation: A Review Development of Green Remanufacture Mechanized Production Line which Use for 200L Oil Drum (iron) Circulation Use Conjugate Limits and Interferential Condition as Milling the Helical Face A Proposal of Robust Design Method for Deriving Adjustable Range Friction Stir Processing for the Modification of Laser Claded Microstructure The Variable Cross-Section Helix Turning Trajectory Algorithm Used on the Middle-Convex and Varying Ellipse Piston Skirt Study on Hydrogen Evolution Properties of Carbon Supported PtCu-LaOx Membrane Electrode Materials Study on Cold Precision Forging of Non Straight Wall Cavity Piston The Research of Nonlinearity Error Control on Five-Axis Machining Post Processor Effect of Graphite Dopant on the Performance of Tubular Cathode for Direct Ethanol Fuel Cell Two-Dimensional Numerical Simulations of Tubular Cathode in a Direct Ethanol Fuel Cell Laser Hybrid Welding Processing of Mg-Rare Earth Alloy Prediction of Temperature Distribution in High-Speed End Mill Assisted by Heat Pipe Cooling Microstructure and Mechanical Properties of Laser Welded Lap Joints of Ti-6Al-4V Alloy Research on the Velocity Look-Ahead Algorithm in the NC System Effect on Formation of 5083 Aluminum Alloy of Activating Flux in FBTIG Welding Optimization on Resistance Performance of High Speed Unmanned Surface Vehicle in Middle-Low Speed Adaptive Variable Speed Control of Wind Turbines Study on the Performance of Ba0.5Sr0.5Co0.8Fe0.2O3- Membrane after Laser Ablation for Methane Conversion Design of Digital-High-Power LAB Charger Electrochemical Performance of New Ferroalloy Electrode of RE2FeSb2 (RE = Y, Dy, Er) Welding Technique for New High Speed Railway Track Key Part Micro-Tubular Solid Oxide Fuel Cell with Graded Anode and Cobalt-Free SrFe0.9Sb0.1O 3 Perovskite Cathode Other Related Topics A Numerical Investigation of a Capacitive Viscometer with Fluid-Structure Interaction Using Equivalent Modeling Research and Application of Wireless Data Acquisition System for Agricultural Machine Finite Element Analysis on Thermal Characteristics of Lathe Motorized Spindle Structure Optimal Design Method and Engineering Application Silicone-Modified Butyl Acrylate-Methyl Methacrylate Copolymer Latex: Effects of Coupling Agents Study on Hoist Force Calculation of Hydraulic Lifting System Used in Pressure Balance Workover Rig Stiffness Calculation and Predetermined Preload Optimal Design of Cable Control System Multi-Domain Unified Modeling and Simulation for Aircraft Landing Gear Using Modelica

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB07200541
• ISBN:
  • 9783037852149
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058