Advances in abrasive technology XIV : selected, peer reviewed papers from the 14th International Symposium on Advances in Abrasive Technology (ISAAT 2011), Sept. 18-21, 2011, Stuttgart, Germany
Author(s)
Bibliographic Information
Advances in abrasive technology XIV : selected, peer reviewed papers from the 14th International Symposium on Advances in Abrasive Technology (ISAAT 2011), Sept. 18-21, 2011, Stuttgart, Germany
（Advanced materials research, v. 325）
Trans Tech Publications, c2011
- : pbk.
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Abrasive technology is the most important aspect of precision technology. A total of 117 full-color papers are to be found in this book. Developments in precision turning, milling, and drilling, machining of difficult-to-cut materials, such as chromium-nickel alloys, titanium alloys, carbides and ceramics, and glass are addressed. In addition, special processes of precision technology, including polishing, lapping, jet-machining, magnetic finishing, micro and nano-machining, machine-tool design, silicon wafers and spinning, are presented. This work is a handy guide to the state of the art.
Table of Contents
Preface, Sponsors and Members
Chapter 1: Grinding Technology
1.1. Grinding Process and Principles
Wheel Based Temperature Measurement in Grinding
Characterization of the Response of Embedded Thermocouples in Grinding
Research on Workpiece Surface Temperature and Surface Quality in High-Speed Cylindrical Grinding and its Inspiration
Research on Heat Transfer and Calculation Method of Workpiece Surface Temperature in High Speed Grinding
Heat Transfer in Grinding-Hardening of a Cylindrical Component
Deformation Mechanisms and Abrasive Machining of Nanoscale Thin Film Multilayered Solar Panels: A Focused Review
Single Grain Scratch Tests to Determine Elastic and Plastic Material Behavior in Grinding
Calculation of the Contact Stiffness of Grinding Wheel
Analysis of Effective Cutting-Edge Distribution of Grinding Wheel Based on Topography of Working and Ground Surfaces
Nano-Topography Distribution on Non-Axisymmetric Aspherical Ground Surface
Modeling of Specific Grinding Energy Based on Wheel Topography
Research on Macro Simulation of Surface Grinding Based on FEM
Preparation and Characterization of Self-Lubrication CBN Grinding Wheel Containing Graphite as Lubricant
An Experimental Study on a Flexible Grinding Tool
Effects of Cutting Edge Truncation on Ultrasonically Assisted Grinding
1.2. Grinding of Difficult-to-Cut Materials
Ceramic Balls Machining by Centerless Grinding Using a Surface Grinder
A Study of High Speed Grinding Alumina Ceramic for a Small Diameter of Diamond Tool
Grinding of Steel-Ceramic-Composites
Wear Behavior of a Vitrified Bond CBN Wheel by Ultrasonic-Assisted Creep Feed Profile Grinding of Inconel 718
FEM Analysis of Single Grit Chip Formation in Creep-Feed Grinding of Inconel 718 Superalloy
Experimental Study on Grinding of a Nickel-Based Alloy Using Vitrified CBN Wheels
High Speed Grinding of Nickel-Based Superalloy with Single Diamond Grit
Analysis of Specific Energy of TC18 and TA19 Titanium Alloys in Surface Grinding
Wear Characteristics of Various Diamond Tools in Cutting of Tungsten Carbide
Effect of Lubricants on Precision Planing of Tungsten Carbide Using Mono-Crystalline Diamond Tool
Creep-Feed Grinding of Tungsten Carbide by Using Resin-Bonded Nickel-Coated Diamond Wheel
Study on Complex Helical Drill Grinding Using the Grinder with Tripod Parallel Universal Moving Platform
Particularities of Grinding High Speed Steel Punching Tools
1.3. Dressing
Dressing Process of Porous Self-Generation Superabrasive Tool
Influence of Picosecond Laser Touch Dressing of Electroplated Diamond Wheels on the Dressing of SiC Vitrified Bond Wheel
Analysis of EDD Accuracy for Profiling Metal-Bonded Grinding Wheels
Corrosion Wear Characteristics of ELID-Ground Co-Cr Alloy with Applying Abrasion by Ultra High Molecular Weight Polyethylene (UHMWPE)
Experimental Study on Performance of Monolayer Brazed Diamond Wheel through Chemical-Mechanical Dressing
1.4. MQL-Fluid-Coolant
Filter-Less Purification of Grinding Fluid by Using PGA Based Flocculant
Improvement of Grinding Performance of a CBN Wheel Using a New Grinding-Fluid-Supply System
3-D CFD Parametric Study of the Impact of the Fluid Properties and Delivery Conditions on Flow and Heat Transfer in Grinding
Study on the Effects of Abrasive and Coolant-Lubricant Types on Minimum Quantity Lubrication-MQL Grinding
1.5. Non-Traditional Grinding Process, Grinding Tools, AE and Image Processing
Wire Cutting Tool Concepts for Steel Machining
The Mechanics and Mechanisms of Material Removal in Abrasive Drilling C/E Composites
Process Parameters Influence on Semi-Fixed Abrasive Tool Wear
Modeling Effects of Compliance in Coated Abrasive Tools
Study on Electrolytic Re-Insulation Grinding of Soft Magnetic Powder Cores
Research on the Chemical-Mechanical Grinding (CMG) Tools for Al2O3Ceramic
Effect of Complex Electrodischarge Grinding for Electrically Conductive PCD
A Quick-Test Method to Determine the Grinding Wheel Topography Based on Acoustic Emission
Grinding Monitoring through Thermal Acoustic Emission Signatures
Development of Three-Dimensional Measurement System of a Grinding Wheel Surface with Image Processing
Evaluation of Vibration Finished Surfaces Using Image Processing Method
Chapter 2: Turning, Milling and Drilling
2.1. Machining Process and Tools and Machine Tools
Experimental Study on the Cutting Performance of TiC-Based Nanocomposite Ceramic Tools in Turning 40Cr Steel
Effect of Ground Surface Roughness of Tool on Adhesion Characteristics by PVD Coating
Study on Processing Property of Thin-Walled Titanium Alloy Component with Paraffin Reinforcement
Ultra High-Speed Cutting Experiment under the Cutting Condition that Cutting Speed Exceeds Plastic Wave Speed of Workpiece
Atmosphere Effects on the Machinability of Cutting Tools with Micro- and Nanoscale Textures
Defect Structures in Diamond Composite Coated Cemented Tungsten CarbideSubstrates
Aid of End-Milling Condition Decision Using Data Mining from Tool Catalog Data for Rough Processing
An Experimental Study on the Effects of Ultrasonic Assisted Drilling on Chip Characteristics and Tool Life
Numerical Study on Constant-Flow Hydrostatic Water Bearing for a Machine-Tool Table
2.2. Machining of Composites and Titanium and Nickel-Based Alloys
Drilling CFRP Thermosets Using Mounted Points
Drilling of CFRP/Ti-6Al-4V Stacks
Influences of Processing Parameters on Hole Shape Accuracy in Drilling Carbon Fiber Reinforced Composite
Tool Wear and Cutting Temperature at Machining of Composites
High Speed Milling of Titanium Alloy
The Influence of SiC Particles on Tool Wear in Machining of Al/SiC Metal Matrix Composites Produced by Powder Extrusion
The Cutting Performance of Ultra-Smooth Composite Diamond Coated WC-Co Inserts in Dry Turning Al/SiC-MMC
Milling Experimental Investigation on Titanium Alloy Ti6Al4V under Different Cooling/Lubrication Conditions
Machined Surface Analysis in High-Speed Dry Milling of Ti-6Al-4V Alloy with Coated Carbide Inserts
Prediction of Surface Roughness Using Back-Propagation Neural Network in End Milling Ti-6Al-4V Alloy
Lubricant Applying Effect Mechanism in Inconel 718 Cutting - Effects of Cutting Speed and Depth of Cut -
Empirical Modeling and Analysis of Surface Roughness in Milling Process of Nickel-Based Super Alloy Nimonic 115 through Response Surface Methodology
2.3. Glass Machining
Ultrasonic Coring of Glass Disks Using Double Core Tool
Drilling of Borosilicate Glass with Feedback Control Based on Cutting Force
Chapter 3: Polishing and Lapping
An Investigation on the Chemical Effect in Chemo-Mechanical Polishing
Research on the Polishing Performance of CMP Slurry for the Sapphire Crystal
Tribological Aspects of Chemical Mechanical Polishing Diamond Surfaces
Precision Polishing of Micro Mold by Using Piezoelectric Actuator Incorporated with Mechanical Amplitude Magnified Mechanism
Investigation of a Polishing Pad and a Carrier Film for Decreasing Edge Roll Off of Workpiece
Buffing Performance Analysis of Viscoelastic Polymer with Sensor-Less Polishing Pressure Control
Verification of Polishing Phenomena of Nickel Cylinder Using Photocatalyst and Luminous Dye Excited by Ultraviolet Ray -Study of Ultraviolet-Ray Aided Machining-
Studies on the Lapping of Polycrystalline Diamond Compact (PDC)
Advanced Diamond Charging Process Using Vibrating Charging Ring in Fixed Abrasive Lapping
A Novel Desktop Device for Lapping Milled Micro Thin-Walled Structures
Chapter 4: Magnet Finishing
Finishing of Metal Parts in Magnetic Field Based on Abrasion
Machining Characteristics of Magnetic Force-Assisted Electrolytic Machining for Polycrystalline Silicon
Study on Internal Magnetic Field Assisted Finishing Process Using a Magnetic Machining Jig for Thick Non-Ferromagnetic Tube
Composite Tools Design for Electrolytic Magnetic Abrasive Finishing Process with FEM
Influence of Abrasive on Planarization Grinding Based on the Cluster Magnetorheological Effect
Characterization of Silicon Carbide Grit for Fickerts Used in Porcelain Tile Honing and Polishing Process
Chapter 5: Micro and Nano Machining
A Micro Grinding Experimental Study on AISI 1020 Steel
Ultra-Precision Cutting of Roll Die with Micro Lens Arrays for Plastic Film
Machining Characteristics of Cylindrical Blasting and Application to Micro Patterning
Nano-Grooving on Copper by Nano-Milling and Nano-Cutting
Fabrication and Characterization of High Quality Micro Diamonds by Hot Filament CVD
A Study of the Micro-End Milling of Titanium Alloy
Study on Surface Roughness in Micro End Milling of Mold Material
Statistical Approach Calculating Ground Surface Roughness of Ultrasonic-Assisted Micro-Grinding
Effect of Tool Tilting Angle on Tool Wear and Surface Roughness in Micro Ball End Milling
Chapter 6: Abrasive Jet Machining and Formation
A Study of Material Removal Process in Abrasive Waterjet Milling
Experimental Research on the Surface Roughness of Metal Kerf by Abrasive Waterjet Cutting
An Experimental Study of the Nanoparticle Colloid Hydrodynamic Cavitation Jet Polishing Performance under Different Nozzle Designs
A Study of Jet Formation for Premixed Slurry Jet Nozzle Using the Discrete Phase Model
Chapter 7: Machining of Silicon-Wafer and Glass
Evaluation of Surface Roughness of Quartz Glass Substrate in Fabrication Process for Neutron Focusing Mirror
On-Machine Measurement and Statistical Analysis of Wheel Wear after Grinding Optical Glass
Influence of Wafer Grinding and Etching Techniques on the Fracture Strength of Thin Silicon Substrates
Silicon Electrochemical Etching for 3D Microforms with High Quality Surfaces
Spectroscopic Measurements of Silicon Wafer Thickness for Backgrinding Process
Development of CMG Wheels for Stress Relief in Si Wafer Thinning Process
On the Reliability of Nanoindentation on Si Wafer at Elevated Temperatures
Chapter 8: ECO-Manufacturing
Evaluation of Hard Materials Using Eco-Attributes
Development of Electric Rust Preventive Machining Method -Water Using for Machining: Improvement of Water Recycle System-
Chapter 9: Molding, Sintering and Forming
Implementation of Glass Transition Physics in Glass Molding Simulation
Ultraprecision Mass Fabrication of Aspherical Fresnel Lens by Glass Molding Press
Investigation of the Effect of Addition of Zirconia and Talc on Sintering Behavior and Mechanical Properties of B4C
Deformation Behavior Simulation in Laser Forming of Titanium Sheet -Influence of Free Edge on Deformation Behavior in Laser Forming-
Study on Surface Roughness Muring Metal Manufacturing Process
Chapter 10: Peening Process
Effect of Heating and Subsequent Re-Shot Peening on Surface Characteristics of Shot-Peened Carbon Steel
Effect of Microshot Peening on Residual Stress of High-Toughness Spring Steel
Transfer of Nanocarbon Induced by Fine Particle Peening (FPP) Using Carbon-Black/Steel Hybridized Particles
by "Nielsen BookData"
