Energy and environment materials : selected, peer reviewed papers from the 2009 C-MRS annual meeting "Energy and Environmental Materials", held in Suzhou, China, Oct. 15-17, 2009

Author(s)

• Han, Yafang
• Wang, Tianmin
• Zhou, Shaoxiong

Bibliographic Information

Energy and environment materials : selected, peer reviewed papers from the 2009 C-MRS annual meeting "Energy and Environmental Materials", held in Suzhou, China, Oct. 15-17, 2009

edited by Yafang Han, Tianmin Wang and Shaoxiong Zhou

（Materials science forum, v. 650）

Trans Tech Pub., c2010

Note

Includes bibliographical references and index

Sponsored and organized by Chinese Materials Research Society (C-MRS)

Description and Table of Contents

Description

The main theme of this special collection of 60 peer-reviewed papers is Energy and Environmental Materials". The collection is divided into 4 chapters: Eco-Materials, Energy Materials, Light Metals and Alloys, Low-Dimensional and Amorphous Materials, and provides an up-to-date survey of the topic. Volume is indexed by Thomson Reuters CPCI-S (WoS).

Table of Contents

Preface Part 1 Eco-Materials Exergy-Based Model of the Depletion of Mineral Resources Analysis of Influencing Factors of CO2 Emissions from Integrated Steelworks Based on LCA Preparation and Design of Function Aggregate in Concrete Synthesis and Characterization of TiO2 Nanoparticles Doped with Cu2+ by Microemulsion Method Preperties of Linear Polyaspartic Polyurea Coated Concrete under NaCl Solution Immersion and Co-Action of Load and NaCl Solution Immersion Effect of Curing Temperature on Morphology and Properties of Polyureas Based on Polyaspartic Esters Study on Chloride Diffusion in Concrete with Non-Homogenous Coefficient Using Meshless Boundary Element Method A Novel Constitutive Model for Concrete under Uniaxial Compression 3D Dynamic Simulation for Random-Distributed Aggregate Model of Plain Concrete Mechanical Properties and Microstructure Characterization of Calcium Silicate Hydrate (C-S-H) Gel Investigation on Toughness of Fibre Cocktail Reinforced Self Consolidating Concrete after High Temperature Effect of Ag Particles on Wettability and Creep Rupture Life of SnCu Based Composite Solders Synthesis of a New Semiconductor Compound [(C5S5H3CH2O)4Ni](FeCp2)0.84 Sn-2.5Ag-0.7Cu-0.1Re-xNi Lead-Free Solder Alloy and its Creep Properties of Solder Joints Cu-Ni-Ti Composite Diffusion Coating on Si3N4 Ceramic Surface Effects of Barium Substitution on the Structure and Properties of PSZT Piezoelectric Ceramics Effect of Healing Temperature on Crack-Healing of Al2O3 Toughened by SiC Particles The Research and Development of Novel Magnetic Material and Magnetic Core Used in Planar Transformer Effect of La2O3 Content on Mechanical Properties and Toughened Mechanics of SiC Nanowires Toughened Cw/SiC Composites Part 2 Energy Materials Vacancy Phonon Scattering and Thermoelectric Properties in In2Te3-SnTe Compounds Effects of Ag Addition on High Temperature Thermoelectric Properties of (Ca0.9Gd0.1)3Co4O9 Ceramics Effect of FAPAS Process on the Thermoelectric Properties of -FeSi2 A Simple Way of Pre-Doping Lithium Ion into Carbon Negative Electrode for Lithium Ion Capacitor Phase Structure and Hydrogen Storage Characterization of the As-Cast Mg-10Ni-2Mm Alloy Microwave-Assisted Synthesis of Antimony Oxide Nanostructures and their Electrochemical Properties Effects of Power on Properties of ZnO:Al Films Deposited on Flexible Substrates by RF Magnetron Sputtering A Simple and Low Cost Approach for Texturing on CZ-Silicon Solar Cell Degradation Behavior of MgB2 Powders in Different Medium Environment Effects of Phosphorus on Laves Phase Dissolution and Elemental Diffusion in GH706 Alloy Hot Deformation Behavior and Mechanism of Alloy Inconel 625 Variation of the Reversed Austenite Amount with the Tempering Temperature in a Fe-13%Cr-4%Ni-Mo Martensitic Stainless Steel Effect of W on Deformation Resistance of Co-Bearing 12Cr Ferrite Heat-Resistant Steel for USC Steam Turbines Effects of Long-Term Aging at 1070 DegreesC on Microstructure and Mechanical Properties of Ni3Al-Base Alloy IC6E Oxidation Behaviour of MCrAlY and MCrAlY +ZrO2 Coatings on Ni-Based IC6 Superalloy Effects of Conical Transition Section on Microstructure of a Ni3Al-Base Single Crystal Superalloy IC6SX Effect of Welding Parameters and Post-Weld Heat Treatment on the Cracking Sensitivity of Weldments in Electron Beam Welded Rene 41 with Incoloy907 Part 3 Light Metals and Alloys Study on the Formation Mechanism of Micro-Arc Oxidation Coatings on Magnesium Alloys Effect of Ti Content on Hydrogen Storage Properties of Amorphous MgNi Alloy Application of Regression Analysis to Optimize Hot Compaction Processing in an Indirect Solid-State Recycling of Mg Alloy Phase Diagram Calculation and Experimental Study on the New Type Mg-Al-Zn-Ca-Sr Alloy in the Mg-Rich Region The Study of Interfacial Reactions and Mechanics Properties for Die Casting (Al63Cu25Fe12)p /AZ91 Composites An Electrochemical Method for the Preparation of Al-Mg Master Alloys from MgO Study to Microstructure and Mechanical Properties of Mg Containing High Entropy Alloys SCC (Stress Corrosion Cracking) Behaviors of Mg-7Al Alloy Effects of Yttrium Addition on Microstructure and Mechanical Properties of Extruded Mg-Zn-Y-Zr Magnesium Alloys Effects of Particle-Reinforcement on Elastic Modulus of Metal-Matrix Composites Formation and Mechanical Properties of Mg-Cu-Al-Gd Bulk Metallic Glass Composites Dynamic Recrystallization of 7055 Aluminum Alloy during Hot Deformation Preparation and Microstructure Analysis of Ti-Al Sheet by Electron Beam Physical Vapor Deposition Study on Tensile Fractured Surfaces and Toughening Mechanism of Ti/Ti-Al Micro-Laminate Sheet Thermal Properties of the FCC Al3Zr : First-Principles Study Preparation and Mechanical Property of Super-Light Aluminum Foam Molecular Dynamics Investigation of Relaxation and Local Structure Changes in a Quenched Molten TiAl Alloy Film Part 4 Low Dimention and Amorphous Materials Study on Growth of Carbon Nanotubes by Using Modified Bentonite as Catalyst Study on the Mass Transfer Process in Pan Wet-Spinning Microstructure and Properties of Pure Mg/ZK60 Laminate Processed by Accumulative Roll Bonding The Moessbauer Spectrum Research of the Lanthanon Compound Tb3Fe29-xCrx The Influence of Degree of Polymerization on Precursor-Derived Si-B-C-N Ceramics The Formation and Morphology of PVA Ferrogel Nanofibre by the Electrospinning Process Effect of High-Dispersed Nano-ZnO on the Properties of Vulcanized Natural Rubber

by "Nielsen BookData"

• NCID: BB07691126
• ISBN:
  • 9780878492664
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Stafa-Zurich, Switzerland
• Pages/Volumes: x, 381 p.
• Size: 25 cm
• Classification:
  • LCC : TJ163.7
  • LCC : TA401
• Subject Headings:
  • LCSH : Power (Mechanics) -- Congresses
  • LCSH : Materials -- Environmental aspects -- Congresses
• Parent Bibliography ID:
  • BA00294222