Equipment manufacturing technology and automation : selected, peer reviewed papers from the 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011), September 16-18, 2011, Guangzhou, China

Author(s)

• International Conference on Advanced Design and Manufacturing Engineering
• Chen, Xin

Bibliographic Information

Equipment manufacturing technology and automation : selected, peer reviewed papers from the 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011), September 16-18, 2011, Guangzhou, China

edited by Xin Chen

（Advanced materials research, v. 317-319）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2
• Part 3

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

The peer-reviewed papers making up this book cover the subject areas of: materials and their applications, mechatronics, industrial robotics and automation, machine vision, sensor technology, micro-electronic technology, measure control technologies and intelligent systems, transmission and control of fluids, mechanical control and information processing technology, embedded systems, advanced forming manufacturing and equipment, NEMS/MEMS technology and equipment, micro-electronic packaging technology and equipment, advanced nanocomposite techniques and equipment, power and fluid machinery, energy machinery and equipment, construction machinery and equipment and other related topics. The work constitutes an invaluable guide to the subjects covered.

Table of Contents

Preface, Organizing Committee Materials and Its Applications Heat Loss Analysis of Giant Magnetostrictive Actuator for Precision Alignment Longevity Study of the Head of Hammer Crusher Properties and Application of Waterborne Polyurethane/starch Composite Surface Sizing Agent Microstructure Simulation and Experimental Research of as-Cast 42CrMo Steel during Quenching Process Plastic Forming Spherical Hole Energy Absorption Properties of Porous Metal Analysis of the Main Parameters in the Chemical Mechanical Polishing Process Orthogonal Test and Multi-Element Linear Regression Analysis of Compressive Strength of Nanometer Silicon Cemented Soil The Kinetics of Austenization Process of T91 Ferritic Heat-Resistant Steel Polytetrafluoroethylene Mesh for Many Types of Blueprinting Machine: Preparation and Characterization Study on Continuous Monitoring Glucose Concentration with Terbium Gallium Garnet Crystal The Functional Design and Non-Functional Design of Post-Industrial Era An Auto-Design System of Gleason Spiral Bevel Gear The Influence of Several Ions on Pitting Corrosion in Sedimentary Water of Oil Tank Design and Implementation for Data Acquisition System of Simulation Control Center Basing on Dummy Instrument License Plate Location Research Based on Texture Analysis & Mathematics Morphology Research on the Effect of Microstructure Related to Macro-Mechanical Properties of Solidified Mass Made of Building Residues with SEM Study on Spindle Servo Control of Four-Axis Vertical CNC Machining Center The Framework of Information Collection and Data Management for Mass Customization Furniture An Ultra-Violet Pulse Detecting Based Electroscope for AC Ultra-High-Voltage Apparatuses Optimization Design on the Iron Beam Sectional of the Electricity Transformer Investigation of Lyocell Fibrillated Nanofibers and Papermaking Characteristics Based on WVD for the Processing State Identification Method of Machine Tool LDPE/LLDPE/APP Intumescent Flame Retardant Systems: Molding Parameters and Properties Applications of Composite Spatial Structure Adaptive Backstepping Control for an Interior Permanent Magnet Synchronous Motor Servo System Continuum Analysis for Plate-Cone Spherical Reticulated Shell Experimental Investigations and Analysis of Springback Based on Multi-Angle Panel Draw-Bending Development and Application of Non-Circular Gear Emulsion Motor A Study on 3D Modeling of City Buildings Based on CSG The Realization of Linear Motion Control in Dedicated Digital Control of Marking A Novel Two-Level Instruction Issue Window Based on VLIW Architecture Fuzzy Maximum Scatter Discriminant Analysis and its Application to Face Recognition Effects of High Yield Ratio on Material Properties of Pipeline Steel Study on Lining Board with Bimetal Liquid Composite Casting Research of Manufactory Technology for the Hammer of Single Roll Crusher Microstructure Evolution and Control of 30Cr2Ni4MoV Steel During Hot Forming Fabrication of Removable Partial Denture Framework by Selective Laser Melting Effect of Shot Blasting on Oxidation of TP304 Austenitic Stainless Steel in Steam Manufacture of Ternary Solid Dispersions Composed of Nifedipine, Eudragit (R) E and Adsorbent The Development of a New Type Aluminium Anode for Deepwater Cathodic Protection The Study of the Preparation of Linolenic Acid-Amylose Complexes and their Oxidation Stability Performance Evaluation of Conformable Vices Research on Crack Growth Life and Sensibility Analysis of Influence Parameters in Crack Growth Life The Prediction Method on Warpage of Injection Molded Parts Optimal Interpolation Algorithm Research Based on Quasi-Hermite Space Curve FEM Simulation and Experimental Study on Miling Force for Aero-Aluminum Alloy Based on Trochoid-Motion Structural Design and Testing of Small Ultralight Solar-Powered Unmanned Aerial Vehicle Study on the Stress-Strain Distribution Rule of the Cylindrical Part Deep Drawing with Prefabricate-Holes Ultra-Low Carbon High Strength Weathering Steels The Core of Engineering Education Is to Cultivate the Students' Engineering Practical Ability Optimizing Design and Application of BP Neural Networks Based on Genetic Algorithm The Study of the Fluorescence In Situ Hybridization Applied in the Denitrifying Bacteria on Metal Membrane Bioreactor's Denitrification Tank Investigation of Consumer-Oriented Product System Design The Application of Complex Spice Essential Oils on the Preservation of Pasteuriged Minced Ham Sausage Application Research of NC Machining of Circular-Arc Aligned Gear Evaluation of Typical Asphalt Pavement Structure Performance of Chang-Ji Freeway Coiling Parameters Calculation of Inner Stator Iron Core Using FEM Analysis on Transient Stress State of Elastic Thin-Wall Component of Harmonic Gear Drive Vibration Propagation in Ordered and Disordered Orthotropic Single-Leaf Rib-Stiffened Panels Comparative Study on the Structure and Properties of Japanese and Self-Made Precursors Design of Geomagic Plug-in Based RE and RP System of 3D Crafts Effects of Cr on Microstructure and Hardness of HVOF-Sprayed WC-Co Coating The Modeling Analysis and Dynamics Simulation of Load-Sensing Hydraulic Systems Recent Advances and Future Perspectives in a Grinding Wheel with Defined Grain Pattern Optimization of Ultrasonic Extraction Process by Response Surface Methodology of Polysaccharides from Limonium bicolor Kunze (Bge.) Detection of 3D Position of Object Using Four-Quadrant Photoedetector Preparation and Application of Iron-Loaded Activated Carbon for Catalytic Oxidation of Phenol Wastewater Investigate on Micro-EDM in Air (Dry MEDM) by External Blowing Mode Based on RC Pulse Generator The Effect of Plasma Power on the Properties of Amorphous Silicon-Germanium Thin Films Analysis on Sliding State of Ball in Rotated Dual-Plates Lapping Mode CEP-Based Massive Data Processing Approach for RFID Data Simulation of Hybrid Excited Doubly Salient Motor Driven Control System Continuous Casting Process Parameters on Central Defect of SWRH82B Billet Intelligent Analogy on Wireless Communication Link Performance of Industry Wireless Sensor Networks Effects of Tool Rake Angle on the Curved Radius during Planing-Forming Process of Fine Heat Sink Research on Parallel Computation Architecture Based on Object Computing Network Macro-Residual Stress Field Retrieval for Predicting the Machining Deformation of Non-Prestretched Plate Discussion on the Green Design in Costumes The Comparison of Two Stereo Vision Sensor Calibration Methods Prediction of Liquid Viscosity Effect on Flow Field and Performance in a Solid-Liquid Hydrocyclone Transient Dynamic Analysis of Maglev Linear Feed Unit Crystal-Controlled Synthesis of Nanophase Titania by Microwave Hydrothermal Method Analysis on Cavitation Performance in Multi-Stage Centrifugal Pump Based on Cavitation Model The Setting Method of Project Buffer in Critical Chain Management of Mould Manufacturing Project Based Reworking Research on the System of Lighting Energy Conservation in Public Places Modification of Microstrucure and Residual Stress on Friction Welding Surface of Titanium Alloy by Water-Jet Cavitation Peening Application of Calendering Process to Roll-to-Roll Printed Electronics Precise Numerical Control Electrochemical Machining for Integral Impeller with the Adding Wobbly Feeds Research on Influence of CPP Oil Tubes Disposition on Shafting Vibration Synthesis and Properties of Butyl Rubber Produced by Solution Polymerization The Solidified Structure and Macrosegregation of Wedge-Shaped Titanium Castings Produced by Vertical Centrifugal Casting Process Coating of MgO and Bio-Medicine on Surface of Magnetic Nanoparticles NC Machining Simulation of Loop Subdivision Surface Algorithm with Sharp Feature Keeping Kinematic Analysis of A Novel 2-UPU/2-URU Parallel Mechanism Green Synthesis of Silver Nanoparticles Using Flos Sophorae immaturus Extract and Bactericidal Activity Microstructure and Property of 20CrMo Steel with the Process of Rare Earth Element Carburization Modal Analysis on the Inclined Double-Column and Pre-Stress Combined Frame Structure of the 80MN Rapid Forging Hydraulic Press Study on the Properties of Ground Limestone-High Alumina Cement Gelation System Simulation of Vitrified CBN Grinding Wheel Abrasive Wear Based on SPH An Innovative Design of a Measuring Equipment and Using TiO2 Nanogrease to Reduction of Friction Force for Pneumatic Cylinder Compressive Sensing for the Symmetry Distribution Analysis of Thermal Radiation on the Capsule inside a Cylindrical Hohlraum Virtual-Prototyping Oriented Key Research and Development System of Load Haul Dump Research on the Pollution of Marine Engineering Construction in Southern Petrochemical Optimization of Hydraulic Pressure for Continuously Variable Transmission New Applications of Laser on LED and Semi-Conductor Manufacturing Design of a Bearing Temperature Monitoring System for Mechanical Press Based on RS485 BUS Permeability of Anti-Chloride Ion of Fly Ash Recycled Concrete Effect of Impact Load on Transient Elastohydrodynamic Lubrication of Spur Gears Petri Net Channelized-Based Deadlock Prevention Policy for Flexible Manufacturing Systems Investigations of Tool Wear with Water Vapor as Coolant and Lubricant in Green Cutting Spectra Characterization of Mo(W)-S-Ag Cluster Compounds Films Modified Silver Electrodes and their Electrochemical Behavior Mechatronics Study on Control System of Bearingless Induction Motor Based on Modified Internal Model Control Vibration Control Performance of Active Mount System Featuring Inertial Piezostack Actuator Design and Performance Evaluation of Haptic Master Device Using ER Spherical Joint A New Magneto-Rheological Brake for Haptic Applications Design on Plug Seedling Automatic Transplanter in Greenhouse Direct Slip Linear Control of Bearingless Induction Motor Based on Space Vector Modulation Finite Element Analysis and Dynamics Charateristic Study for High-Speed Magnetic Suspension Motorized Spindle of CNC Machine Tools Design and Experimental Test of ER Fluid Based 3-DOF Haptic Master System for MIS Study on Profibus-Based Control System of the Experimental Device for Cutter Head in Shield Tunneling Machine Research of Self-Induction & Automatic Lifting Rainproof-Curtain Design of the Control Motor in Money Counter Power Harvesting from the Vibration-Induced by the Piezoelectric Stator of Traveling Wave Rotary Ultrasonic Motor Research on Automatic Electroplating Product Line's Scheduling System in Small Batch and Multi Types of Electroplating Design and Experiment of the Pneumatic Plate-Type Vegetable Seeder Estimation Equation of Needle Deflection Based on Dynamics Model in Robot-Assisted Percutaneous Surgery Freehand 3D Ultrasound Calibration Based on Two-Layer Z-Fiducial Phantom Study of EV Motor Control Scheme Tangential Follow System of High-Speed Leather Cutting Machine Modeling and Control Optimization Giant Die Forging Press Machine Main Circuit Electromechanical Hydraulic Servo Control System Modeling and Simulation Research of Fault Detection System Combining with Fault Tree Analysis with Artificial Neural Network in Large Scale Die-Forging Press Design of Hardware-in-Loop Simulation System for Unmanned Aerial Vehicle Research on Simulation and Modeling of Split Double-Rotor Motor Based on Indirect Vector Control Industrial Robotics and Automation Enhancement of a Fault Measure for AMSs Using Probabilistic Timed Automata Hybrid Force/Position Control Hardware System Design and Force Servo Control Realization Design of Longitudinal Optimal Controller in Unmanned Helicopter Based on Genetic Algorithm PID Track Following Control of a 7-DOF Manipulator Based on ADAMS A 3-DOF Parallel Manipulator Based 5-Axis Parallel Kinematics Machine Tool The Isolation and Structural Analysis of Compound Emulsifier Optimal Sliding Mode Control for Linear Singualr System with Input and State Time-Delays Research of Robust Adaptive Fuzzy Control in Manipulator The Conductivity Measurement of Polyethylene Glycol Dilaurate The Collision Avoidance Path Planning of K-Joint Automatic Welding Robot 3D Nonlinear Guidance Law for Bank-to-Turn Missile Research on the Trajectory Planning of the 4-DOF Manipulator Study of the Control Platform of Robot Ammunition Loading System Probabilistic Approach to Robot Group Control An Integrated Micro-Gripping System for the Assembly of Miniature Mechanical Structures A Precise Automatic Assembly System for Fabrication of Complex Miniature Products Vertical Load Analysis of the Lifting Systems for Forging Manipulator during the Forging Process The Research of Content and Critical Technology with Health Management Technology for Civil Airplane Position Error Research of Multi-Legged Walking Robots with Hand-Foot-Integration Function Mechanical Analysis and Experiment of Wheel-Soil Interaction of Lunar Rover The Modeling and Flow Simulation of 40BZ6-15 Centrifugal Pump Multi-Objective Optimization of a 2-DoF Purely Translational Parallel Manipulator Study of Smooth and Accurate Position Controls of Pneumatic Artificial Muscle Actuators for Robotic Arms The Research and Application on Computational Methods in Fluid Dynamics Dynamic Analysis of Multi-Legged Walking Robot's Swing Leg with Hand-Foot-Integration Function Technical Problems and Research Thoughts on Development of Multi-Component Blending Yarn The Influence Analysis of Parameter Errors for Multi-Legged Walking Robot Computer Aided Geometric Method of Forward Kinematics Analysis of Multi-Legged Walking Robots Machine Vision A Practical Method for Circular Hole Measurement Based on Machine Vision Complete 3D Modeling from Rotational Devices A Novel Vision-Based Approach for Detection of Foreign Substances Application of Improved Canny Algorithm on the IC Chip pin Inspection Automatic Localization Algorithm of Multiple Barcodes Research on an Image-Based Visual Positioning System in the PDP Lighting Inspection Machine The Research of the PCB Location Based on Three Layers of MARK Point An Improved Pedestrian Detection Method Based on Adaboost and Performance Analysis Lane Markers Detection Based on Consecutive Threshold Segmentation Study on a Method for Measuring the Attitude of Protable Three-Coordinate Equipment Based on Monocular Vision Research on Underwater Target Tracking Based on Contour Detection A Novel Illumination Compensation Method Using Wavelet Packet Transformation Handwritten Digit Recognition Based-on Bernoulli Mixtures Fixed Viewpoint Imaging and Correction Model of Liquid Column Manometer Applications of Visible and near-Infrared Hyperspectral Imaging for Non-Destructive Detection of the Agricultural Products The Finite Ridgelet Transform for Defeat Detection of Quill The Application of Fast Moving Target Detection Technology in Hanger Intelligent Surveillance System Development on Inspection System for Gear's Dimension Based on Machine Vision Approaches to the Feather Stain Detection and Segmentation Calculus Method Research of Imagery Conceptual Network Based on Revision Calculus Coding Method of Visual Perception Reconstruction Based on Curve Fitting and Energy Function The Research on Camera Axis Perpendicular to the Target Surface and Method to Confirm its Position in Space Inspection and Grading of Surface Defects of Fruits by Computer Vision A 3D Reconstruction Framework from Image Sequences Based on Point and Line Features The Study of an Improved Fuzzy Edge Detection Algorithm in the Radial Tire Quality Detection Sensor Technology Study on a TBD Algorithm of Pulsed Laser Radar Sensor An Efficient VMIMO Scheduling Scheme for Wireless Sensor Networks Study on the Methods of Reduceing Noise in Signal Processing Circuit of CCD Remote Sensor Research on the Transverse Displacement Sensors Using Linear Array CCD A New Piezoelectric Ceramic Electronic Voltage Transducer and its Principle Design Serial-Parallel Combined Distributed Algorithm For High Speed Sampled Data Filter of Sensor Signal Research Advances on Security Problems of Underwater Sensor Networks Applications of Bragg Grating in Strain Measurement of Electromagnetic Railgun A Carbon Dioxide Detector Used in Earthquake Ruins An Opto-Electronic Integrated Non-Contact Angle Measuring System for Knife Blade Angle The Research on Capacitance Sensor with Dielectric Film Coating for Thinkness Measurement of Water Film Research on Measurement Method of Oil-Water Interface Based on Oscillation Frequency Minimum Power Architecture of Relay-Based Network with Bandwidth and Hop-Count Constraints Errors Analysis and Compensation of Six-Axis Force Sensor Based on Stewart Platform Composition Control of Palladium-Sliver Alloy for Optical Fiber Hydrogen Sensor Monitoring the Cotton Growth Conditions Based on LAI from Remote Sensing and Expert Knowledge A New on-Line Multi-Factor Monitoring System of Water Accidental Pollution Events Based on the Behavioral Responses of Aquatic Organisms Study on Sine-Wave Driving Circuits for EMCCD and its Electron Multiplication Gain Vibration Frequency Analytical Formula and Parameter Sensitivity Analysis for Rocking Mass Gyroscope Sensor of Testing Fabric Infiltrate Characteristic Video Nodes Based Collaborative Object Localization Framework in Wireless Multimedia Sensor Networks Research of Temperature Compensation Methods on High Accuracy Pressure Sensors Design and Modeling of a Spherical Actuator with Three Dimensional Orientation Measurement System Comparison of Dynamic Signal of MFC and PVDF Sensor: Experimental Investigation Experimental Study on Odor Compass System Based on Gas Sensor Array and DSP Technology Performance Analysis and Testing of Four-Quadrant Position Sensitive Detector A Kind of Improved Triangle Centroid Algorithm Based on RSSI-Ranged A Test Method of CCD Photoelectric Parameters Stiffness Calculation of the Microstructure with Crab-Leg Flexural Suspension Adapting AODV with High-Throughput for AMI Smart Meter Networks The Digital Quality Evaluation System of Elbow Flowmeter Planar Hall Effect Ring Sensors for High Field-Sensitivity Microelectronic Technology Design of a High Precision Integrated Charge Detection Circuit Based on Quartz Gyroscope Evaluation of VDMOS Storage Failure Rate Based on Accelerated Factor RFID-Based Thermal Bubble Non-Floating Type Accelerometer with Semi-Cylindrical Chamber and Filled with Xenon Gas Research on the Automatic Synchronization Control of Marine Power Station An Analytic Model for Electron Mobility in Strained Si/Si1-xGex nMOSFETs An Algorithm of 3-D ADI-R-FDTD Based on Non-Zero Divergence Relationship Ternary Logic Dynamic CMOS Comparators Impact of Ge-Profile in Base on SiGe pnp HBT's Performance Study on Transmission Characteristics of Silicon-Based Microstrip Bandpass Filter Measure Control Technologies and Intelligent Systems Study on Acceleration Control Algorithm of Blood Pump Driven by Large Gap Magnetic Force Noise Test and Countermeasures Research of Locomotive Cab Discussion on the Wavelet Adjustment Factor Threshold Noise Reduction Technology Based on DSP Simulation Research of Fuzzy Self-Adaptive PID Control for Fracture Trauma Section Stress Wavelet Packet Algorithm to Feature Extraction of Heart Sound Fault Diagnosis Technology for Power Electronics Rectifier Based on Wavelet Packet The Realization of the Information Acquisition System for Fiber-Capacitive Drop Analyzer Research on Speed Observer of PMSM Servo System Study on Neural Network Control Strategy of Electric Vehicle in-Wheel Motor Mine Hoist Bearing Condition Monitoring and Fault Diagnosis System Based on Labview Fuel Identification Based on the Least Squares Support Vector Machines The Harmonic Analysis of Power System Control System and Signal Acquisition of Intelligent Bending for Wide Quadrangle Plate A Time-Delay Prediction Control Method Based on Immune Optimization Design on Height Interface Circuit for Atmosphere Computer Research and Application of Phase-Sensitive Protection in Load Control Center Research on the Influence to Power System Protection with Harmonic of Power Electronic Devices Electro-Hydraulic Servo System Based on PID Control of Genetic Algorithm Study on Monitoring the Dynamics Characters of Wind Turbine Tower Study on Temperature Field Characteristic and Temperature Detection of Shuttle-Type High-Temperature, High-Pressure, Anti-Erosion Special Valve Research on the Passive Detection Model Based on 3D-HBF and FSVDD for Underwater High-Speed Small Targets and its Application Development and Application of Online Monitoring System for Blast Furnace Hearth and Bottom Design of Front End Circuits in Cleaning Grain Loss Monitoring and Control System for Electric Combine Harvester Design of Measurement and Control System for a High-Performance TEM Based on Embedded PC LonWorks Node Achieving Power Line Communication Based on Slave a Parallel Mode Design of a Temperature Measurement System Using LabVIEW Virtual Instrument Modules Study of Alumina Concentration Control Based on Intelligent Characteristic Model The Summarization and Prospection of APF Control Means Development of a Novel Self-Adaptive Contacting Ultrasonic Inspecting System for Welding Belt on Pipeline Research on Feature Extraction of Wheat Leaf Disease Image Research of Corrosion Monitoring System for Metal Coatings Detection and Identification of Leakage Signal in the Explosive Gas Atmosphere Research on Five Sections Measuring Model in Process Pneumatic Measurement System for Inner Hole Honing Nonlinear System Fault Detection Based on TLLE Discussion about the Information Management and the Intellectualization of Unattended Substation Metro Train Comfortableness-Based Operation Curve Simulation Development of Measurement and Control System for TLP Bonding Study on the Intelligent Current Protection for Mining Power System Urban Oversaturated Traffic Network Control Based on Preference Multi-Objective Compatible Optimization Control Design of Air-Tight Property Detector for Gas Meter Based on C8051F350 MCU LPV Modeling of Buck Converter and Gain Scheduling Control An Iterative Learning Approach for Freeway Traffic Density Control The Adaptive Control of Electric Pitch Servo System Design of Intelligent Measure Control System for Thermal Defects Transmission and Control of Fluid Design and Research on the Test and Analysis System for the Proportional Relief Valve Characteristics The Development of an Axial Piston Pump Prototype for Seawater Desalination and its Application Modeling of Network Cooperative Design of a Hydraulic System Based on Multi-Agent Design of Hydraulic Dynamic Equilibrium in Household Heating System Silk-Screen Print Technique in Laminar Flow Control Study on the Angle of Stationary Crescent for Radial Compensation of Inner Mesh Gear Pumps Theoretical Analysis and Experimental Study on Automatic Trajectory Tracking Control of a Shield Tunneling Machine under Pressure Regulation Working Mode Numerical Simulation and Analysis of Interior Flow Field in Control Valves under the Blocking Fault Study on the Frequency Characteristic of Self-Excited Oscillation Pulsed Water Jet Mixing Effect and Energy Efficiency Analysis for Different Lances in Steel Converter Process Passive Control Shuttle-Type Check Valve - a New Nuclear-Class Fluid Control Component Testing System Design for Multi-Circuit Gear Pump Research on Control Characteristics of Cartridge Valve Controlled by High-Speed On/Off Valve The Flow Field Analysis of the Automotive Power Streering Congtrol Unit's Flow Channel Electro-Hydraulic Servo System Controlled by Index Reaching Law Sliding Mode Simulation Technique of AMESim Applied in Mould Electrohydraulic Servo Control System Mechanical Control and Information Processing Technology The Use of Ant Colony Model in the Staff Deployment Problem Road Adaptive Suspension Controller Based on Partial-State Feedback Gain Scheduling Application of Fuzzy Adaptive Kalman Filtering on GPS/INS Integrated Navigation System Reconfigurable Design and Implementation of Gravure Engraving Motion Controller Based on FPGA The Processing Way of Pipeline Vibration Signal Based on Wavelet Transform Research for RBF Neural Networks Modeling Accuracy of Determining the Basis Function Center Based on Clustering Methods Image Encryption Algorithm Based on 3D Arnold Cat and Logistic Map Lateral Control of Roll-to-Roll System Using Fuzzy Control Logic and Vision Sensor Embedded System Development of Manufacturing Execution Management System for Workshops Based on IOT Technology Design of Electron Beam Polishing Equipment on Mould Design of a DSP System Based on FPGA Research of FMM Algorithm Acceleration Based on FPGA and Cell BE Development of Embedded Control System of Micro-Flow Variable Plunger Pump Based on Frequency Control An Algorithm and Design for RFID Velocity Measurement Based on Least Square Method The Application of ISO WD 26262 for Automotive Embedded System Advanced Forming Manufacturing and Equipment Application and Analysis of Long-Distance EPON in Transmission Lines Monitoring System Application of Inertial and Magnetic Sensors in Human Fall Detection Study on the Effect of Riveting Equipment Spindle Displacement on Torque of Ball Stud in Auto Control Arms Direct Slicing of CAD Model and Volumetric Error Compensation in Rapid Prototyping Design and Analysis of a Distributed Multi-Leaves and Large-Deformation Flexible Hooke Hinge Coupled Electrostatic-Structures-Fluidic Analysis of a Nozzle/Diffuser Diaphragm Micropump The Research of Strengthening Mechanism on Ferritic Stainless Steel Under Impact Processing NEMS/MEMS Technology and Equipment Research on the Characteristics of Orifice Flow on Microfluidic Chips Effect of Structure on the Performance of Electrostatic MEMS Actuator Design of Proof Mass and System-Level Simulation of a Micromachined Electrostatically Suspended Accelerometer Micro Electroformed Ni-P Alloy Parts by extended UV-LIGA Technology Fabrication of Nano Logic Gates Based on ZnO Nanowires High-Aspect-Ratio and Self-Sensing Probe for AMF Based on Micro-Fabrication Graph-Based Manufacturing Flow Generating Method for Micro Device Physical Compensation of Quadratic Phase Aberrations in Practical Digital Holographic Systems Micro Louvers for Micro and Nano-Satellites Thermal Control Study on Real-Time Compensation RTCP Module of Five-Axis CNC System The Second Perturbation Solution for Periodic Vibration of Magnetostrictive Actuator Study of Low Cost Micro Autopilot for Fixed-Wing UAV Effect of Resident Stress on the Aberration Correction Ability of MEMS Spatial Light Modulator Micro-Electronic Packaging Technology and Equipment Design of a Controlling System of Greenhouse Based on the Virtual Instrument Technology Simulation for Temperature Control System of Dyeing Machine Based on Fuzzy Control A New Integrable Coupling of a Soliton Hierarchy Analysis about the Independent College Students are Examined in Using the Library The Research of Printing Quality Based on Tri stimulus Value A Novel Heaving Buoy Wave Energy Converter Spring Force Compensation for Bond Head A Visualized Investigation of Void Growth and Coalescence in Pure Copper Sheets under Impact Tension A Validity Analysis of Estimate Improvement Model of Software Cost Analysis on the Stress and Deformation of Deep Excavation Simulated by Multiplying ANSYS and ABAQUS Analysis of Field Reliability of Two Models of Heavy Vehicles Analysis of Dynamic Behavior of Zigzag Groove Setback Arming Device with Two Degree of Freedom Study on the Evaluation Model for Network Security Studies on the Integration of Geographic Information System (GIS) and Drainage Pipe Network Model A Conceptual Framework for Ensuring the Implementation of the Public Warehouse Based on RFID A Novel Method of Establishing "Datum Reference" for the Coaxiality Measurements Using the Multi-Section and Multi-Probe Gauges A Contactless Mobile Payment Method Based on Security TF Card and NFC Technology Using Monte Carlo Method to Calculate the Flow Field of Jet Pumps Tracking and Analysis of Two-Dimensional Saddle Node Bifurcation Boundary in Wind Power System with Reactive Power Compensation of STATCOM Analytical Approximations to Buckling Deformation of the Sandwich Beams Including Transverse Shear A Novel Bandstop Filter Based on Coaxial Cavity A Security Improved Remote Password Authentication Scheme Using Smart Card Advances of Chromium(III)-Based Catalysts with Multidentate Heteroatomic Ligands for 1-Hexene Production Design of Miniaturized DRO Based on Isolated Structure Paired Characterization and Preliminary Correction of Low-Cost Soil Moisture Sensors for Wireless Sensor Network Application Advanced NC Techniques and Equipment The Research on Coordinated Control of Multi-Cutter Based on the Ultrahigh Pressure Water-Jet Study on Sliding Mode Control for Permanent-Magnet Synchronous Motor Servo Systems Research on Open Architecture NC System of Blade Polishing Machine Based on PMAC Kinematics Analysis of Non-Orthogonal 5-Axis Machine Tools Research on CNC and Lathe Processing of Middle-Convex and Varying Piston Application of Reliability Centered Maintenance in a Hydrocracker A High-G Metal Capacitive Microaccelerometer with Round Proof Mass Supported by Multi-Beam Study on Treatment Technology of Waste Water with Copper in Complex System Corrosion Inhibition of Tinidazole in KOH Solution for Zinc Vehicle-Bridge Coupling Vibration Influence of Section Profiles on Steel-Concrete Composite Box Girder Beam Spreading of Partially Coherent Beams Propagating through Turbulence Atmospheric in Boundary Layer Association Rule-Based Novel Incremental Updating Algorithm Body Type Classification and Increment Analysis Research on Long Distance Radio Frequency Identification System of Toolholder Fault Diagnosis of CNC Machine Tools Common The Wear and Drag Predictions of the Micro-Asperities on Textured Wall Corrosion Behavior of Cobalt-Based Stellite 6 Alloy by Combustion Synthesis and Vacuum Induction Melting Analysis and Testing of the Dynamic Performance of Tooling System Research on Effect of Temperature on Carrying Capacity of Heavy-Duty Hydrostatic Rotary Table Structural Design and Kinematics Analysis of Oblique Crossing 3DOF NC Spindle Simulation of Deep-Sea Extremophiles Sampling System and Experimental Study Convergence Analysis and the Nested Refinement for the Trapezoid Finite Element Convergence Analysis for the Nested Refinement of Triangular Finite Element A Scalable Graphics User Interface Architecture for CNC Application Based - on WPF and MVVM Application of Quaternary Aminated -Cyclodextrin Ionic Liquid Stationary Phase in Capillary Gas Chromatography Development of a STEP-NC Controller for 5-Axis Machining of NURBS Surfaces Weibull-Distribution-Based Method of Bayesian Reliability Evaluation for Machining Center Cause Analysis about Buildup Formation of Carbon Sleeve in Continuous Annealing Furnace for Silicon Steel Design and Realization on the Optimal Quadratic Controller for the Positional Servo System of Numerical Control System Real-Time Compensation of Ram Thermal Elongation Errors for Heavy-Duty Numerical Control Machine Tool Study of the Realization and Application of Bio-Impedance Technology The Effects of Tuning Controller Gains for Servo Feed Unit Positioning Accuracy Cutter Radius Compensation for Five- Axis Peripheral Milling in CNC System Development of in-Pipe Robot with Controllable Magnetic Force Power and Fluid Machinery Design of Simulated Riverway Experimental Control System Deterministic Macro Chaos of Manufacturing Information System Based on Self-Organization Performance Analysis and Improvement Approach of HEV Extended Expansion Gasoline Engine Study on Corrosion Inhibitor Technology in Gas Pipeline Development on the Multi-Component Blending Yarn of Hemp/ Anti Bacteria Fine Rayon/Micro-Porous Polyester Fiber Analysis of Mass Transfer during Loose Material's Convective Drying Research on Non-Meshing Force Gear Pump Data Fusion of Radar Image and ECDIS Based on Matching of Harris Feature Points The Development and Performance Analysis of a Tri-Proportion Controller Research on Effects of Geomagnetic Induced Currents to Power Systems Optimization of Advanced Cycle Gas Turbine Intercooler Structure Based on Genetic Algorithm Study of the Effect of Liquid on Mixing Process for Size-Type Binary Particulate Systems by DEM Simulation Electronic Structures and Thermoelectric Properties of NaCo2O4 Thermoelectric Material Effects of High-Energy Carbon Ion Irradiation on Isatis Indigotica Fort An Introductory and Analysis of the Stationary Blade Rotary Compressor Research on the Simulation of Airflow Field in Cyclone Separator Based on ANSYS Parameter Optimization and Numerical Simulation of Dust-Collecting and Dedusting System with Air Curtain in Heading Face Research on a Scheme of Real-Time Measuring of Lubrication Oil Quantity in an Aero-Engine Tank Investigation of Numerical Simulation in Combustion Chamber Predictability Emergency Strategy of Civic Critical Infrastructure to the Urgent Events Emergency Policy for Perishable Products Supply Chain when Nodes Fail Research on the Simulative System of Engine-Thermoelectric Source Numerical Simulation of Gasoline Blending with Two Different Mixing Systems The Computerized Simulation Software Development of the Pneumatic DTH Designing and Aesthetics of Daily Ceramics The Structure and Fluid Flow Analysis for a New DSH Dynamic - Static Combined Mixer Modification and Analysis on Inlet and Outlet Angle of Turbodrill's Cascade Blade Profile Simulation of the Parking Behaviors in a Shopping Mall of Dalian Synchronous Rectification Strategy for LLC Resonant DC-DC Converter Study of Material Motion Law in Horizontal Circling Vibrating Dryer Numerical Simulation Analysis of Centrifugal Pump Floating Ring Seal Digital Lensless Fourier Holography with Optical Fiber and Reduction of Speckle Noise Numerical Simulation and Experiment Research on Aerodynamic Characteristics of a Multi-Blade Centrifugal Fan Design and Implementation of Virtual Interactive Scene Based on Unity 3D Three Kind of Triangle Rational Functions and Applications for Discrete Nonlinear Equations The Vibration Fault Diagnosis of High-Speed Rotating Machinery Based on the Simulation Compressor Anti-Surge Control System Optimization Energy Saving Renovation Research of Pump- Control Electro-Hydraulic Servo System Based on Multi-Mode Extension Control Energy Machinery and Equipment Dynamic Optimization Research on Self-Cleaning and Rotating Steel Spiral with Plastic Coat Fast and Accurate Calibration of 1D and 2D Gratings Non-Fragile Decentralized Control for the Uncertain Singular Large-Scale Systems with Time-Delay Optimization of Hydrolysis Pretreatment Conditions with Two Kinds of Enzymes for Enhanced Proteolysis in Egg Yolk Solution Using Response Surface Methodology Influences of Smoke Exhaust Effect by Setting Atria Buffer Zone in Straight Corridor of Building Research on Multiple Simultaneous Faults Diagnosis of Hydropower Unit The Design and Efficiency Analysis of Planetary Gear Reducer Prediction of Power Transformer Fault Based on Auto Regression Model Study on Effects of Timber Production on Forest Carbon Storage A Case Study in Oil-Gas Transportation through Subsea Pipeline in Liaohe Tanhai Oilfield Parameter Design and Application of Hydraulic Support with Hanging Chain and Splicing Beam in Shallow Seams Investigation on a Semi-Active Silencing Device for the Exhaust Noise Image Inpainting Based on Compressed Sensing Numerical Analysis of Compacted Forming Concrete Pile in the Subsea Soil Hydraulic Calculation Method Study of Branch Shape Water-Injection Pipe Network Based on Binary Tree Study of Key Parameters of Braking Energy Recovery Scheme for the Underground Loader Basing on Man-Machine Engineering Three-Dimensional Interactive Simulation of Anschutz Gyrocompass Based on VRML Prediction of the Aerodynamic Acoustic Power Contribution on Automobile's Surface Based on Curle's Integral in Broadband Noise Source Models Feasibility Analysis of Thermal Energy Recovery for the Shanghai Railway Station Experimental Research on Calculating Wave Force through Wave Pressure Measurement Research on LiBr Absorption Refrigeration System Using Automotive Exhausted Heat Empirical Study on Process Optimization of MTO Production Systems Synthesis, Structure Characterization and its Coordination with Metal Ions of N,N'-Diethoxycarbonyl-N'',N' ''-(1,2- Propylidene) Dithiourea History's Continuity and Regeneration of Fangzi, a Modern Town along Jiaoji Railway Dynamical Modeling, Simulation and Analysis for Voltage Regulation System of Hybrid Excitation Doubly Salient Generator Simulation on Vehicle Speed Analysis of Rear-End Collision Life Prediction of Hull Based on Weibull Distribution Computation and Simulation Analysis of Twin-Screw Pump Efficiency under Frequency Conversion Analysis of Petersen Coil Application in Electrical Distribution Networks Enterprise Management Innovation of Manufacturing Industry in the E-Business Environment Control Methods of Active Power Filter Research on a New Detection Technique of FBG Using OTDR Preparation and Characterization of H-PAN Grafted PEG Phase Change Fibers Construction Machinery and Equipment Second Order Model Reduction Based on Diagonal Blocks of Gramians Running Analysis when Change the Installation Angle of Cooling Fan for the Engineering Machinery Engine Optimization Design of a New Heavy-Duty Self-Unloading Semi-Trailer Research on Prediction Method and Model for Maintenance Spare Parts Requirements of Armored Equipments in Wartime Preparation of Crayfish Flavoring by Fermentation Simultaneous and Sequential Fermentations with Saccharomyces cerevisiae DJ02 and Lactobacliius acidophilus WS in Pear Wine System Identification and Control of FOPDT or SOPDT Processes Research on the Dynamic Characteristics of Master Cylinder in the Hydraulic System on Concrete Pump The Research and Application of Smoke-Free Low-Noise Environment-Friendly Ground Flare Research into the Characteristics of Slewing Hydraulic System on Truck Crane Simulation Test of Equipment of Non-Contact Detection with GPR Research on Detection Equipment for the State of Railway Tunnel Lining An Improved Design of Stochastic Halftoning without Error Diffusion for Raster Image Processor Research on Stress Sensitivity of Low Permeability Sand Stone Reservoir Preliminary Study on Dissolved and Colloidal Organic Carbon in Tidal Creek of Chongming Dongtan Realization of QoS Control Strategies in the next Generation Network on the Basis of Differentiated Service Model and Priority of Inter-Frame Application of Wavelet-Based Fractal Dimension Threshold Denoising Method to Load Time History of Engineering Vehicle Study on Preparation and Factors of Amino Silicone with Low Viscosity Flexible Polishing Machine with Dual Grinding Heads for Aeroengine Blade and Blisk Robust Control with Input-Output Decoupling Technique for an Interior Permanent Magnet Synchronous Motor in Electrical Vehicle System Topology Optimization with a Penalty Factor in Optimality Criteria Design of Control System for Concrete Mixing Station Based on PLC and Touch Screen Design of Automatic Paving Machine for Asphalt Coiled Waterproof Material on Express Railway Bridge Procurement Mode Research on Open Solicitation of Qualified Suppliers for the Construction of Guangzhou Asian Games Stadiums Shape Recognition Based on Freeman Chain Code Scattering of Anti-Plane SH-Wave by Multiple Cylindrical Cavities in Elastic Semi-Space Comparison and Analysis of Domestic and Foreign Design Methods of Escalators Energy Saving Transformation of Drying Technology for Potato Granules Whole Meal CEC Control Model for Wall Thickness Thickening of Tube Ends and Simulation Real-Time Simulation as a New Tool in Future Advanced Aerospace Project Design and Manufacturing Processes Developing and Integrated Approach to Advanced Aerospace Project Design in Tertiary Education

by "Nielsen BookData"

Details

• NCID: BB07824434
• ISBN:
  • 9783037852163
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 3 v.
• Size: 25 cm
• Parent Bibliography ID:
  • BA24926058