Mechatronics and materials processing I : selected, peer reviewed papers from the 2011 International Conference on Mechatronics and Materials Processing (ICMMP 2011), November 18-20, 2011, Guangzhou, China
Author(s)
Bibliographic Information
Mechatronics and materials processing I : selected, peer reviewed papers from the 2011 International Conference on Mechatronics and Materials Processing (ICMMP 2011), November 18-20, 2011, Guangzhou, China
（Advanced materials research, v. 328-330）
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This special volume brings together the latest advances in, and applications of, mechatronics and materials processing. It comprises 523 papers selected from the some 1000 papers originally submitted by universities and industrial concerns all over the world. The papers specifically cover the topics of manufacturing technology and processing, materials science and technology, mechatronics and automation. All of the papers were peer-reviewed, by selected experts, and chosen for their quality and relevance. This work will provide readers with a broad overview of the latest advances in the field of mechatronics and materials processing. It will also constitute a valuable reference work for researchers in the fields of mechatronics and materials processing.
Table of Contents
Preface, Organizing and Committees
PART I
Chapter 1: Manufacturing Technology and Processing
A Note on Two Cooling Methods in Surface Grinding
Thermodynamic Properties of Water during Phase Transition and Simulation on Freezing Process in Fractured Rock
Design of Flexible Multi-Gripper Stretch Forming Machine by FEM
Fatigue Reliability and Optimal Design Research of TBM Cutter
Forming Process and Mechanism of Microcapillary Grooves of Miniature Cylindrical Heat Pipe
Recent Development of Vibration-Assisted Abrasive Machining
The MOSFET Model with an Anti-Parallel Diode as a Power Switch
Design and Magnetic Circuit Analysis on Claw-Pole Permanent Magnet Generator for Vehicle Application
Study on Single-Hoist Multi-Objective Optimization Rescheduling Problem
Study on Fiber Laser Welding for DP780 High Strength Steel
One Optimizing Method for Moments of Inertia Applied with Improved Adaptive Genetic Algorithm
Numerical Simulation of Temperature Field during the Growth of Nd:GGG Laser Crystal
Design for Deep Groove Ball Bearing Assembly Machine's Cam Drive System Based on Parametric Modeling
Function Simulation of the TBM Based on VRML
Study on the Reverse Designing for Water Cavity Model of Engine's Cylinder Head
A Method about Functional Coupling Based on Trimming
Research on Structure Analysis of Asphalt Box Based on ANSYS
Graphic Thinking Process in Innovative Product Design
Multi-Toothed Milling Force Model and Simulation for Form Milling the Gear of the Hypoid Gears
Theoretical Investigation and Analysis of Solar Thermoelectric Air Conditioning
The Finite Element Analysis of Different Materials' Anti-Seismic Performance of NC Tool Rods
Temperature Fields Characteristics on Removal Rock by High-Energy Lasers
Experimental Study on Bionic Screw Pile of Reducing Adhesion and Resistance
Heat Source and Heat Partition Models in ELID Grinding
The Study of Hot Embossing and Bonding Machine for Microfludic Chips Fabrication
Comparison of the Isothermal and Non-Isothermal Kinetics for Predicting the Thermal Hazard of Tert-Butyl Peroxybenzoate
Max-Min Ant System Approach for Solving Construction Site Layout
Application of Wavelet Envelope Spectrum Analysis in Air Blower Rotating Stall Failure Diagnosis
A Study on the Large-Diameter Seamless Gas Cylinder Dimensional Accuracy of Rotary Expanding Process with Finite Element Analysis
Study on Parametrical Modeling about Free-Surface Based on UG Customization
Design of Emergency Call System of Forklift Based on the Existing GSM Network
Design and Simulation of Pastry Slicer Based on SolidWorks and ADAMS
Research on the Maximum Flow of Air Traffic Network Based on Discrete Time Loss Queuing
Research on Reconstruction 3D CAD Data of Automotive Panel Based on Reverse Engineering
Digital Test Instrument of Radial Direction Displacement Precise for Round Shape Part Based on Labview
Research on Electromagnetic Pick-up Type Grip Device
Construction Enterprise Supply Chain Design Research
Failure Analysis of Welding Joints of CQ Steel
An Outline of Methods in Machining Curved Hole
Study on Tooth Profile of Involute Conjugated Internal Gear for High-Pressure Internal Gear Pumps
An Alternative Method of Preoperative Planning for Fibula Free Flap in Mandibular Reconstruction
Uncertainty in Project Management Based on Lean Construction Implementation
The Environment Temperature Simulation Research of Gyroscope
Experimental Study on the Tribological Characteristics of Nanometer WS2 Lubricating Oil Additive Based on Engine Oil
Design of Micro Electromagnetic Vibration Energy Harvester and Storage System Based on Human Motion
Design and Optimization of FCEV Subframe by Integrated Applications of Hypermesh, UG and ADAMS Multi-Platform
Green Design and Manufacturing Technology on Hoisting Device of the Silt Coal Car Loader
Study on Relief Valve with Permanent Magnetic Spring
Design of Portable ECG Tester
An Optimal Design Method for Radar Brackets
Artificial Neural Network for Predicting Wear Properties of Brake Lining Materials
A Bayesian Network Based Approach to Defect Prediction in New Product Development
An Experiential Calculation Method to Radial Extrusion Pressure by Floating-Die
Research on the Pressure Fluctuation of Ceramic Filter Backwash Based on Accumulator
Mechanical Products' Function and Structure Modeling Based on the Knowledge
A Globalizing Manufacture and Information Sharing System Based on Network Platform
The Development of Friction Material Tester with Adjustable Speed and Pressure
Template-Based Expression and Reuse of Design Knowledge
Products Information Inheritance Based on Object-Oriented Technology
Design of Paving Equipment for Coiled Waterproof Material on Bridge
Construction and Application of the Patent Knowledge System for Supporting Product Innovation
Research of NC Automatic Programming Based on Process Features Recognition
Study on Thermal Analysis of Main Mirror in Space Solar Telescope
The Dynamic Simulation of Vibration Process of the Top Drive System of the JDD-100 Type Drilling Rig Based on ADAMS
Innovative Design of an Automatic Train Picking Hook Device Based on TRIZ
Discussion of Design Ideas in Product Development Design Based on Product Extension in Marketing
Theoretical Study on the Microwave Assisted Reversal of Magnetic Moment for Graining
Layout Optimization of Support Structure Based on ANSYS
Numerical Simulation of Three-Dimensional Temperature Distribution in the Supercharged Boiler Furnace
The Effect of Normal Curvature of the Free Surface on the Cutting Width
Analysis and Research on Fractal Model of Normal Contact Stiffness of Joint Interfaces
Forming Technology of Spiral Micro-Groove in Plane
Development of Structural Health Monitoring Software System of Shanghai Center Tower
Innovative Design and Simulation for a Novel Vane Pump
Solid Modeling of Spatial Cam with Oscillation Roller Follower
Effects of Laser Multiple Processing on Properties of Heat-Resistant Steel
Study on Application of Critical Path to Project Time Management
A New Technique for Preparation of Two-Phase Foam Materials for Controlling Mine Dust and its Application
Effects of Laser Shock Processing on Fatigue Lives of Heat-Resistant Steel and Estimation of Fatigue Safe Lives
Mathematical Model for Evaluating Roundness Errors by Minimum Circumscribed Circle Method
Invention of Nano-Material Synthesis Process Equipment via Vapor-Phase Technics
Design and Realization of a Flexible Claw of Rough Wall Climbing Robot
The Research of GPRS-Based Remote Fault Monitoring System for CNC Machine Tools
An Algorithm for Best-Fit of a Pattern of Profile Features to the True Profile
Genetic Algorithm Based on Simulation for Single Machine Scheduling Problem with Setup Times
Virtual Prototype Co-Simulation of 4WS Vehicle
Numerical Analysis on Surface Stress of Rectangle Piston Ring with Chromium Coating
Study on Intelligent Manufacturing System Model of Iron and Steel Enterprises in Ubiquitous Information Environment
The Green Design for the Moving Device of the Silt Coal Load Machine
Numerical Simulation of Heat Transfer and Fluid Flow in Glass Tank Furnace after Bubbling
A Novel Anti-Blockage Indicator in Airport
The Design and Size Optimization of the New FCEV Subframe Based on Hypermesh Platform
SPH Method Based on Bird Impact Numerical Simulation of Aircraft Engine Fan
Modeling and FEM Analysis for Interference between Tool Shank and Shrink Fit Toolholder
Study on Contact Force of Tooth Profile Modification
Geometrical Models for Precision Grinding Aspherical Mould
Prediction of Microstructure and Mechanical Properties of Plate in Roller Quenching
Study on Quality Control and Evaluation Methods of Development of Complex Product System
Experimental Study on Cryogenic Cutting of High-Strength Steel with Liquid Nitrogen Cooling
A Study on the Characteristics of Micro Electropolishing for Stainless Steel
Application of CAD/CAM Technology in the Development and Lofting of Complex Sheet Metal Parts
Experimental Research on the Dynamic Characteristics of the Milling Vibration in High-Speed Milling of the Thin-Wall Components
Analysis on Fiber Laser Welding of MS1470 Steel
Parametric Study of Welding Temperature Distribution in T-Joint Fillet Weld Using FEM
Based on Ansys Drillwell Hook DG450 Strength Analysis
Modeling and Experiment of Pulse Electrochemical Deburring on Inclined Exit Surface of Drilling Hole
Formation of Side Electrode on Quartz MEMS-Based Double-Ended Tuning Fork Using Enhanced Lift-Off Process
Drawing and CNC Software System for Light Gage Steel Structure
Active and Passive Deformation of Large Thin-Walled Workpiece in Heat Treatment Process
Direct Rapid Manufacturing Technology with Laser for Metal Parts
Hyperparameter Estimation Based on Gaussian Process and its Application in Injection Molding
A Research on the Measurement of Friction Coefficient of Plastic Forming by Floating Die Extrusion
Research on Logistics Management Information System
A Computer Aided Testing System for an Aero Turbo-Shaft Engine
Adsorption Characteristics of Superplasticizer with Waste Plexiglas (WPS) onto Cement Particle Surface
Design and Research of Slotting Modification Profile for High-Speed and Heavy-Loading Marine Gear
Study on Extension Functional Integration and Benefit of Electric Vehicle
Analysis of Cutting Forces and Machining Error in Ball End Milling of Cylindrical Surfaces
Microstructural Characterization of Ni-Al Alloyed Layer under Laser Rapid Solidification Condition
The External Circular Precision Detection of Precision Machining Zirconia Ceramics Spindle
Slotting Profile Modification Technology and Generating Simulation's MATLAB Implementation for Heavy-Loading Mine Gear
Study on Influences of Superplasticizer with Waste Plexiglas (WPS) on Cement Paste and Mortar
Research for Tooth Profile Modification Technology and Slotting Process
Present Status of Fault Injection Research for Testability Demonstration and Evaluation
The Research Based on the Movement Control CARDS of NC Machining
Study on Small-Diameter Deep-Hole Vibratory Drilling of Difficult-to-Cut Materials
Study on Method of Overcoming Adverse Effects of Radar Blind Zone on Large Fleet in the Three Gorges Reservoir
The Development of Graphic Design Method Based on Pro/Toolkit Spur Gears
Research on Structure Analysis of a Feeder Based on ANSYS
Power Batteries Pack Test System Based on GPIB Protocol
Design and Manufacturing of Complex Surface Impeller Based on RE
Based on Bearing Centerless Strengthening and Polishing Processing Multiple Collision Finite Element Simulation Analysis
A Simulation Study on Translational Piston Air Compressor
Trajectory Designing and Realizing for the Variable Structure Motorcycle Helmet
Numerical Simulation of Welding Distortion under Different Sequences
Research on the Modeling and Simulation of Vehicle R&D Process Based on Petri Net
Rare Earth Superfine Powders Fabrication and Characterization by Novel Non-Ball Miller
Optimal Design Grape Rain Shed Based on CFD and GSCAD
The Use of Rapid Prototyping to Fabricate Liver Tissue Engineering Scaffold
Simulation Model of Traction Systems for CRH2 EMU Based on PSCAD/EMTDC
The Design of New Water Jet Spray Gun
W722 Lathe of Fault Detection and Diagnosis
A Fast Scanning Algorithm for Extension Velocities in Level Set Methods
The Comprehensive Study on Virtual Manufacturing
Finite Element Analysis and Experimental of Milling Force for Aeronautical Thin-Walled Workpiece
Finite Element Analysis and Structure Design for Chassis of Aircraft Towbarless Tractor
Influence of Slide Stroke Curves on Deep Drawing of Box Shaped Part
Analysis on Dynamic Characteristics of HTC100 NC Lathe Bed
The Development and Utilization of Nuclear Power from the Perspective of National Economic Security
Diffusion Channel of Generic Technology in Equipment Manufacturing Industry
Research on JIT Production Logistics Management System
Causes of Cracks of External Wall Insulation
Ergonomically Designed Kneeling Chair Influence on Adolescent Idiopathic Scoliosis
Numerical Simulation and Analysis of High-Strength Steel Autobody Panel Stamping
The Analysis and Treatment to Lube Oil Separator's Leakage
Research on Realization Mechanism of Case-Based Reasoning System Facing the Industrial Design
Research and Design of Box-Taking Mechanism in Automatic Cartoner
Surface Texturing for Crystalline Silicon Solar Cell Using RIE Equipped with Metal-Mesh
Hazardous Chemicals Transportation Risk Control Based on Goal Programming
Experimental Study on Fretting Wear Behavior of Steel Worm Gear Pair
Value Optimization of the Existing Public Building Energy-Saving Renovation Based on AHP and Improved VE
Research on NC Process Information Integration Method Based on Database and Heterogeneous CAM Programming Platforms
Method for Design of Integral Shaped Milling Cutter Profile
Study on Information System of Rolling Mill Equipments Management Based on Web
Design for the Resistance Automatic Adjustment System of Multifunctional Interactive Fitness Bike
Cooperative Optimal Method for Two Level Models of Micro Device
Design of Injection and Recycling Integrated System Used in the Strengthening and Polishing of Bearing Ring
Study on Logistics Management Platform Function
Study of Acoustic Emission of Wheel Passivation for Cermet Based on Super-Speed Grinding
Contact Analysis and Optimization of a New Type of Propeller Shaft-Hub Connection Structure
A Simple Closure Device of Isolating Explosion Switch
Research and Development on Miniature Teaching Computer Numerical Control Lathe Machine
Analysis on Option Value of Supplier Involvement in Collaborative Development
Research on Quality Control Flows and Techniques of Software Project Management
Design and Numerical Analysis of the Internal Suction Flow Heat Sink
Study on the Rapid Progressive Die Design of Sheet Metal with Free Form Surface
PART II
Chapter 2: Material Science and Technology
Tribological Applications Considering Roughness Effects on Grain Flow
Determination of Residual Stress of Hard Film/Soft Substrate Specimens via Unloading Results of Nanoindentation Tests
A Design of Forming Dies for a Manifold of Airbag Inflator
Thermal Shock Performance of Al2O3/TiO2 Air Plasma Spray Coatings
Processing and Crystal Microstructure of Porous High Pressure Crystallized Nanodiamond/UHMWPE Biomedical Nanocomposite
Influence of Pulsed-DC Power Frequency on Mechanical Properties and High Speed Drilling Application of a-C:H:Zr-x Coatings
Sensitivity Analysis of Magnetic Abrasive Finishing Process Parameters
The Physical Characteristics of Bio-Oil from Fast Pyrolysis of Rice Straw
Topology Structure Design of 12 Flapping-Wing Mechanisms
On the Study of Non-Engineering Students Applied Open Source for Learning Graphic Design Skills of Dynamic 3D Motocross Suspension Mechanism
Study on Surface Parameters of Asperity Flattening in Sliding Contact for Metallic Thin Film on Die Material during Metal Forming
Optimal Design of Polishing Trace for Link-Type Optical Fiber Polisher
The Tungsten Density Distribution and Tribological Performance Analysis of Carburized Medium Carbon Steel with Tungsten Ion Implantation
Stress-Induced Phase Transformations of Micro-Crystalline Silicon Films Arising at Nanoindentations
Kinematics Simulation and Optimization for the Mechanism of 5R-P
Fire Safety Assessment Research for High-Tech Plants
Study of Vibration Fault Diagnosis on TRT
Study on the Effect of Slope Stability by Bedrock Softening under the Condition of Strong Rainfall Infiltration
The Development of Embedded Rotating Machine Fault Diagnosis System Based on Qt/Embedded
The Find-Forming of Transmission Line in ANSYS
Based on Entropy Weight and Fuzzy Comprehensive Evaluation Ecological Benefits of the Project-Analysis on Cold-Formed Thin-Walled Steel Residential Structure
Analysis on Effects of Fuel Cam on High-Pressure Fuel System
Empirical Analysis of Performance of Public Organizations Based on DEA Model
Study on Advantage for Exploring Thin Sandwich by CPTU
Study on Figuring Technique on a Back-Strap Loom of Li Nationality
Studies on Curing Kinetics Parameter of TDI-PPG-MOCA Polyurethane by FTIR
Study on Complex Adaptive Features of Enterprise Network
Heat Analysis of a Flat Permanent-Magnet Linear Synchronous Motor
Effect of Si Content of Al-Si Matrix on Roll Cast Wire Inserted Strip
Research on Technology Introduction and Innovation of Shanghai Modern Silk Reeling Industry
Traffic Survey System Based on GPS, GPRS and GIS
Study of SARFT and Telecom Operators in IPTV Industry Chain Based on Evolution Game Theory
Analysis of the Energy Efficiency Grades Detection for Power Transformers
Fire Investigations and Analyses for a Typical Agricultural County in Yunlin, Taiwan
Inverse Arithmetic of the Equivalent Heat Transfer Coefficient of Mine Goaf
The Dynamic Response of the Clamped Beam under Low Velocity Impact
Study on Efficient Approach on Cost Control in the Stage of Architecture Engineering Design
Study on Condition Assessment of Highway Bridge, Normal-Speed and High-Speed Railway Bridge
Static Studies of a Steel Chain Ropeway Section Using Msc Adams
The Web Classification Based on ROUGH-GA-BP
Efficient Design of a Torque Actuator for Lower Extremity Exoskeleton Based on Muscle Function Analysis
The Evaluating and Quantizing of Human Factors at Workplace
The Framework and Construction Rural Science and Technology Information System
A Creative and Practical Study on the Theory of Developing Work Process
Study on Preparation and Performance of MRF for Torque Transmission
Small Problem, Big Crisis: A Study on the Importance of Fire Separation in Tall Buildings
The Remote Fault Intelligent Diagnosis System Based on B/S Structure
Amplitude Frequency Response Characteristics of Fe-Based Damping Alloy Simple Beams under Forced Vibrations
Toughness and Internal Friction of Weld Metal Welded by High-Current MAG Welding
The Involvement of Coloring Agent, Cu, and its Effects on the Optical Performance for Color Glass
ABS Fabrics Chemically Plated by Cu/Ni-P as Electromagnetic Shielding Material
Service Life Prediction for the Neoprene Based on Tearing Strength
Effect of Lorentz Force on Non-Axisymmetric Thermo-Mechanical Behavior of Functionally Graded Hollow Cylinder
Relationship between Slip Resistance of Shoe Sole and Materials and Floor Conditions
The Effect of Titanium Addition on Microstructure and Properties of Laves Phase Cr2Nb Alloy Synthesized by Hot Pressing
Microwave Absorbing Properties of Radar Absorbing Structure Composites Filling with Carbon Nanotubes
Finite Element Analysis of X-Cor Sandwich's Shear Modulus
A Special Manufacture of Nanowires with High Precision and its Concrete Implement
The Application of Blast Furnace Slag in Cementitious Self-Leveling Mortar
Study on Phase Structure and Electrical Properties of La-Doped (K0.5Na0.5)0.94Li0.06NbO3 Ceramics
Study on Dielectric and Ferroelectric Properties of Gd-Doped Sr2Bi4Ti5O18 Ceramics
A Rotary Magnetorheological Damper for a Tracked Vehicle
Wet-Chemical Synthesis and Enhanced Photocatalytic Performance of ZnO/Ag Micro Hybrid Material
Creep Properties and Damage Study of Ni-Based Alloy C276 at High Temperature
Effect of Mechanical Stirring on Microstructural Morphology in Semisolid A356 Alloy
Defect-Related Photoluminescence from SiO2 Thin Films by Si-Ge Ions Doped
The Critical Conditions of Ferroelectric Domain Switch with Different Porosity and Pressure
Study on Coating and Technological Conditions of LLM-105
Effect of Air Position to the Mechanism of Air-Decked Blasting
Analysis of Temperature Field on Infrared Active Detection of Heavy Pressure Vessels Wall Surface Defect
Research for Damping Behavior and Microstructure of Interpenetrating Polymer Networks Based on Multi-Components
Fabrication and Application of CVD Diamond-Coated Copper Wire Drawing Die
Numerical Calculation on Flaw Response in Inhomogeneous Media
Optical and Electrical Properties of Sol-Gel TeO2-SiO2 Composite Films
Solution-Based Doping of Cobalt into ZnO Nanorods Membrane
Application of Moldflow in Gas-Assisted Injection Molding
Efficiency Comparison of some Natural Products on Corrosion Inhibition of Al-Mg-Si Alloy
Stability Analysis of Cracks in the Stress-Release Boot of Solid Rocket Motor Grain with J-Integral
Design of Mobile Jumping Robot Based on DSP2407
The Deposition Rate of Ti Film by Plasma
Research on Changing Regularity of Green Sand Properties
Experiment of Gray Iron Abrasive Wear for Wheat Grain Powder
Effect of Nano-Filler Network on the Rheological Behaviours of Poly(vinylidene fluoride) Nanocomposites
Exploration of the Defect's Effect on the Mechanical Properties of Different Orientated Nanowires
Two High-Speed and Large-Drive-Current BiCMOS Analog Switches
The Key Technology in the Parallel Control of Inverter
Study on Thermodynamic Principle of Preparation of VC by Carbon-Heat Reducing
The Preparation of Mica Composite Insulation Material with Starch Adhesive and its Modified Enhancement
Preparation and Performance of RTV Coating for Anti-Pollution Flashover with Superhydrophobicity by Filling CaCO3/SiO2 Composite Particles into Silicone Rubber
Effects of Alloy Powder for WC/Steel Base Surface Composite Structure and Interface
Experimental Study on CTOD Fracture Toughness of Welded Joints of Low Temperature Steel
Fabrication and Properties of Al2O3 Short Fiber Reinforced Aluminium Matrix Composites
Research on the Stress Fatigue Assessment about the Hot Spot Stress on the Bogie Frame
Comprehensive Evaluation on Technical Economic Performance and Scheme Optimization for Asphalt Mixture
Research of Properties and Microstructure on High-Strength Casting of Turbo-Charger
Property and Application of Austempered Ductile Cast Iron
Research on Polypropylene Fiber and Mineral Admixtures on Fluidity of Cement-Based Materials
The Formation of Super-Thin Dielectric Film on Porous Substrate and its Stopping - Transmittance Characteristics for Particles
Experimental and Numerical Study on Six- Point Bending Test of a Composite Stiffened Panel
A Method of MEMS Package Using Local Laser Bonding
Investigation on the Load Capacity and Failure Process of T-Joint by Experiments and Numerical Method
Realization of the Internet Based Telecooperation Robot System
Synthesis and Properties of a Modified Sponge Iron for Removing Dissolved Oxygen
Influence of Crack Depth on Chloride Transport of Cracked Self-Compacting Concrete under Non-Steady State Migration Test
Preparation and Properties of Halogen-Free Flame Retardant Epoxy Resins with Aryl Phosphinate Dianhydride Hardener
The Effect of Preparation Conditions to Crystall of Ti Film
Experimental Study on Synthesis of High Purity Mullite
Leaching and Detecting Free Magnesium Chloride for Magnesium Oxychloride Cement
Experimental Study on the Anti-Cracking Property of Basalt Fiber for Cement-Based Materials
Study on the Preparation of Nano-Cu2O and its Morphology Control
Fatigue Analysis of Pure Waterjet Nozzle-A CFD and FEA Approach
Preparation and Microstructure of Co-Ferrite Fine Powder
The Manufacturing of the Bamboo Buffer Packaging Material
The Influence of Loading Rate on the Interfacial Fracture Toughness of Carbon Fiber-Metal Laminates Based on Magnesium Alloy
Research on Impact Factors of Thermal Insulation Material Based on Grey Relational Analysis
Magnetorheological Fluid and Design of Magnetorhelogical Devices
The Influence of Friction on Forming Accuracy of Tubular Parts by Hydroforming with Radial Crushing
The Influence of Phase Transformation Cycling on Improving of Plasticity and Microstructure of Fe-14Mn-4Si-8Cr-4Ni Alloy
Thickness Optimization of SPF for Titanium Alloy Negative Angle Parts
Deformation Behaviors of Tube Rotary-Draw Bending Filled with Steel Balls
Physico-Chemical Properties of Edible Gelatin Film from Arrowtooth Flounder (Atheresthes Stomias) Skin
The Surface Hydrophilicity of Polypropylene Non-Woven Treated by Atmospheric Glow Plasma
Finite Element Simulation of Temperature Field on Laser Cladding Layers Regulated by Micro-Forging
Different Thickness of Honeycomb Paperboard Vibration Frequency of Testing and Simulation
Design of the Inversion Power-Supply Control System Based on DSP
Design of New Metal Detector
Improved Rotative Mid-Point Mensuration and Newton-Raphson Method in 2-D Flat Rolling Simulation
Nonlinear Cumulative Fatigue Damage Model
The Effect of Cerium Substitution on Electromagnetic Properties of NiZn Ferrites
Study on Milling Testing of WC-Co Cemented Carbides Diamond Coated PCB Milling Cutters
Plastic Micro Features Produced by Microwelding Machine
Bond Interface Evaluation by Ultrasonic Testing and SEM for Radial Friction Welding Joints of Copper and Steel
Preparation of Bio-Material Liquid Film and its Function of Reducing Soil Water Evaporation
Study on Bearing Dynamic Properties of Nano-Particle Reinforced ZA27 Alloy Composite Material
Microstructure and Property Research of T91 and T23 Heat-Resisting Steel Welding Joint
The Relationship of NaOH Molarity, Na2SiO3/NaOH Ratio, Fly Ash/Alkaline Activator Ratio, and Curing Temperature to the Strength of Fly Ash-Based Geopolymer
Prediction Method of the Dent Depth of Composite Laminates Subjected to Quasi-Static Indentation
Study on Properties and Mechanism of Si-Reinforced Zn-Al Alloys
Wind Power Micro-Generator Using Dielectric Electric Active Polymer
Bioactivity of L-b-L Self-Assembly TiO2 Hollow Spheres by UV Irradiation Enhanced
Optimization of Experimental Parameters to the Formation of Bi2212 Phase via Sol-Gel Method
Study on Infrared Transparent Radar Double Band-Pass Filter
Synthesis and Photocatalytic Property of FeVO4 Photocatalyst by Sol-Gel Method
Tensile Mechanical Properties of Wood Fiber / PVC Composites
Optimization of Process Parameters in Spark Plasma Sintering Al6061 and Al2124 Aluminum Alloys
Diffusion Behavior of Aluminum Atoms in Hot Dip RE-Aluminizing
Mechanism Study on the Coiled Tubing Deformation under a Combination Loading
Synthesis and Characterization of Poly ( -caprolactone)/ TiO2 Nanocomposites Obtained by In Situ Polymerization
MMT and Short Time Soaking in Hexane to Suppress DOP Migrating from Flexible PVC
Synthesis of Spherical Zinc Oxide Micro-Flower via an Electric Field-Assisted Homogeneous Precipitation Method
Microstructural Characterization of Rapidly Solidified Al-High Si Alloys
Effect of Artificial Aging (T6) on Microstructure of Al-AC8H/Al2O3 MMC Produced by Stir Casting Route
Influence of Small-Strain and Large-Strain Methods on Mechanical Behaviors in Shape Memory Alloys
Synthesis, Characterisation of Al2O3-Cu Nano Composite Powder and Water Based Nanofluids
Microstructures Finite Element Simulation of Laser Cladding Layer Regulated by Micro-Forging
Investigation of Phase Composition and Microstructure of the B4C/BN Nanocomposite Powders and the B4C/BN Nanocomposites Sintered Bulks
Effect of Dopants on Microstructure and Properties of Polyaniline and Polypyrrole
Hydrothermal Synthesis and Photoluminescent Properties of Zinc Tungstate Nano/Microstructures
The Effect of WC Doping on the Electrochemical Behavior of Nanosilicon/CMC/AB Composite Electrode
Preparation of Cottonseed Protein-Based Superabsorbent Hydrogel Composite
The Characterization of Different Doses of Electron Beam Irradiation on the Structure and Properties of PAN Precursor Fibers
Numerical Simulation of Hot Forging for the Disc of Superalloy GH4169
Constitutive Modeling for the Prediction of Peak Stress in Hot Deformation Processing of Al Alloy Based Nanocomposite
Microstructure and Properties of Surface Nanostructured Copper
Investigation on Properties of a New CB/WPUA Composite Coating
Flow Stress Constitutive Equation of AZ31 Magnesium Alloy for Hot Compression
Effect of Microwave Drying on Dyeing Rate of Cotton Yarn
Research on Inner Cooling Apparatus Sets in the Mold of 700mmx700mm Bloom
Study on the Graphite-Based Cementitious Material for the Soil Moisture Detective Probe
Preparation and Applications of Compatibilizer in HPVC/EPDM
Comparative Study on Thermal, Compressive, and Wear Properties of Palm Slag Brake Pad Composite with other Fillers
Preparation of Flexible Graphite Sheet with Fine Flake Graphite
The Bending of Symmetrical Laminated Composite Plate Based on Symplectic Method
Effects of La on the Microstructures and Mechanical Properties of AZ91 Magnesium Alloy and its Mechanism
Studies on Mechanical Properties and Wear Behaviour of In Situ Al-TiC Composites
PART III
Chapter 3: Mechatronics and Automation
Research on the Development of Large Application Specific Integrated Circuit Based on SOPC
Modeling and Simulation of PMSM DTC System Based on the Speed Sensorless
Study on the Relationship between Hydraulic Support on the Working Face with Large Mining Height and Surrounding Rock
A Self Motion and Rotation Video Nodes Coverage Algorithm
Dynamic Research and Design on SINS Damping System in Vehicle
Studying on Multiple Services Precoding of MIMO System
Research on B2C Electronic Commerce System Based on X3D/VRML
Direct Torque Control of Asynchronous Motor Based on Flux Auto Switching
Two Friction's Laws for Lagrange's Equations of Multibody System with Dry Friction
Ant Colony Algorithm's Application of Textile Monitoring Image Recognition
Tire Pressure Monitoring Inflatable Restraint System
Research on the Broaching-Load Testing System of Hydraulic Broaching Machine
Adaptive Impedance Control for Robot Based on Estimation of Environmental Parameters
Fault Diagnosis of Hoist Gearbox Based on Time-Domain Analysis of EMD and Fuzzy Clustering
Modeling and Simulation of Hydraulic System of the Tower-Belt Based on Power Bond Graph
Open Automatic Laser Engraving System
Surface- Based Computing Model of Maximum Independent Set Problem
Coupled Flexural-Longitudinal Vibration in a Curved Periodic Pipe Conveying Fluid
Self-Adaptive Scaling Factor Fuzzy Controller and NC Feeding Servo System
A New 2T-2R Hybrid Parallel Manipulator
Digital Frequency Multiplying Method for the Power System Frequency Tracking Based on FPGA
Study of Coplanor Capacitance Prong Teeth Sensors
Multiple Vortex Body Vortex Numerical Simulation
Study on Intelligent Control of Milling Process Based on MATLAB
Research of Fabric Weave Pattern's Recognition Using Texture Orientation Features
A Novel Precision Ultrasonic Thermometer
A Kind of Land Form Detector for Loose and Soft Sandy Soil Milling-Planing and Collecting Device Machinery
Design of a Hand Exoskeleton Rehabilitation Device
On-Line Test System of Air-Condition in Automobile
Characteristics of Human Operator in Manual Tracking Control System
Dynamic Characteristics Analysis and Simulations of Transverse Vibration of Axially Moving Electrode Wire in WEDM
Modeling of Networked Control Systems in Electric Multiple Unit with Packet Dropout and Network-Induced Delay
Automatic Positioning Control System of Train
A Temperature Detecting System Based on DS18B20
A Study of Predictive Control of Energy-Saving of Heating Process
Defects Classification of Steel Cord Conveyor Belt Based on Rough Set and Multi-Class v-SVM
Design of High-Speed and Low-Power Two-Channel Pipeline ADC
Design of CMOS Amplifier Using New CCII Topologies
The Research of Digital Double Close-Loop DC Speed Regulation System Based on ATMega8
Study on the Shovel and Support Bracket's Compensation for Vertical Pose's Deviation of Roadheader
Application of Intelligent Characteristic Model in Alumina Concentration Control System
Visual Detection System Research of the Button Battery Based on Labview
Performance and Benefit Analysis of Mining Accumulator Locomotive AC Speed System Based on DTC
Shuttle-Type Passive Control System for Pressure Pipeline Conveying
Adaptive Simulated Annealing Genetic Algorithm for Optimizing Injection Production Parameters of Steam Flood Well
Experiment Research on Bionic Structure of Mechanically Coupled Diaphragms for Sound Source Localization
Design of a Speech Decoding System Based on Cortex
An Anti-Sway Controller's Design of the Overhead Crane
Control Strategy Study on Drum Water Level of Supercharged Boiler Based on Radiation Energy Signal
Application of Artificial Neural Network to Flaw Classification in Ultrasonic Testing
Global Path Planning for Full-Area Coverage Robotic Systems by Employing an Active Genetic Algorithm
The Analysis on Fire Smoke Exhausting Robot Vibration Based on Wavelet Transform
Study on Ultrasonic Characteristics and Sensors in Partial Discharge
A Study on Improved Eclat Data Mining Algorithm
Electrical Errors Analysis and Correction for Time Grating Displacement Sensor
Energy Regulation Based Close-Loop Variable-Speed Valve-Controlled-Motor System
A Study of PID Control System Based on BP Neural Network
Automatic and Intellectualized Reconstruction of the Surface Roughness Measuring Instrument
Parameter Identification of Inertia Properties of Space Robot Based on Momentum Conservation
Design of Test System for Static Parameters of Projectile and Rocket Based on LabVIEW
Design and Application of Network Borehole-Ground Electrical Measurement System
Design and Study on Intrinsically Safe Circuit of Portable Infrared Methane Alarming Device
Development of High Temperature Superconductor Current Limiter
IT-Infrastructure for an Integrated Visual Analysis of Distributed Heterogeneous Simulations
PS-FB-ZVZCS PWM Converter Modeling and Simulation Based on the PID Neural Network
Application of Serial Communication Control in the Motion Control System
Research on QoS Services to MPLS Enabled Industrial Control Network
Design of Vibration Signal Data Acquisition System for Rolling Bearing Life Testing Machine Based on Virtual Instrument Technology
The Portable Computer System of Wet Gas Two-Phase Flow Measurement Based on Labview
Design of Electric Connector's Automatic Assembly System
The Design of Embedded Motion Controller Based on DSP and Development of Driver under Linux
Wet Gas Flow Rates Computation System for Unattended Operational Natural Gas Well Based on ARM
Design of Intelligent Control and Diagnosis System of Aquaculture Based on PROFIBUS
A New Approach for Coverage Area Computing of Radar Network
Application of Vibration and Noise Analysis in Water-Lubricated Rubber Bearings Fault Diagnosis
Research and Design on the Control System of the Deastringency of Fresh Persimmon
Underwater Acoustic Sensor Network Nodes Targeting and Optimization Strategies
The Research of the Ultrasonic Heat Meter Adopting the Two Reflection Structure
Strategic Study on Metro Train Comfortableness Based Operation
Research and Design of a New Control System for Internal Vibration Concrete Shaping Machine
Research on the Oil-Gas-Water Three-Phase Flow Experimental Apparatus
Denoising Algorithm Based on Correlation of Inter Scales Wavelet Coefficient for Damage Signal of Wire Rope
The Design of Paver Driving Control System on SCM
Study on MCU Based Programmable Frequency Detector
Simulation and Control about Arrival and Aerobraking on Neptune
Product Innovation Design Knowledge Acquisition System Based on MAS
Research on Feature Extraction Based on Vibration Phase Diagram and its Application in Roller Fault Diagnosis
Design and Simulation for Control System of Tobacco Leaf Roasting Based on Fuzzy-PID Control
Design and Modal Analysis of Automatic Cleaning Wall Mechanism
Blind Source Separation Based on Wavelet and Cross-Wavelet
Design and Implementation of Nonlinear Junction Detection FPGA-Based System
Research and Application of Robotics Remote Sensing
Amplitude Control of Limit Cycle in Chua System
Research on Visible Measurement of Dispersion Spot at Four Quadrant Photoelectric Detector
Monitoring System of Two Levels Non-Continuous Signal of Automotive Camshaft Sensor
Double Error Function Decision Feedback Momentum Blind Equalization Algorithm
One Kind of High Precision Non-Contact Displacement Sensor and its Application
A Robust Trajectory Tracking Control Scheme of Two-Link Flexible Manipulator
Mixed Vibration Signal Separation and Moving Object Detection Based on Independent Component Analysis
The Robotic Force Tracking Based on Single Input Fuzzy Adaptive Controller
Automatic Positioning Closed-Loop Control Cystem Design of Linear Time Grating Sensor
Adopting Three-Level Inverter to Solve the Bearing Fault of Roll Forming
Experimental Study of the Variable Stiffness Vibration Isolator
The Identification of Engine Noise Source Based on Simulink Blind Sources Separation
Surface Tracking with Robot Force Control in Unknown Environment
Configuration Software-Based Control System for Wine Production
Impact of Long Hydraulic Pipeline upon Performance of Hydraulic Control System
Study on Pilot's Visual Information
A Research on the Stiction and Detection in the Control Valves
Path Planning of a 6DOF Humanoid Manipulator
Design of LabView-Based System of Noise Measurement on Gear Box
Investigation of Motor-Generator Integration System for Electric Vehicle Based on Induction Motor and Fuzzy Control
E-Business Data Integration Scheme Based on XML Technology
Design of Control System of DC Motor Based on Fusion FPGA
Research on Vibration Isolating with Magneto-Rheological Damper
Feedforward and Feedback Control of an Inverted Pendulum
Modeling and Simulation for Parachute Inflation Process Based on Finite Element Method
Simulation Analysis of Wheeled Vehicle Skid-Steer
The Research and Application of the Internal Combustion Engine Power Plant--Rotary UPS Monitoring Systems
A New Strengthening-Polishing Bearings Equipment Based on the Anti-Fatigue Manufacturing Technology
Research on High Dynamic Target Electro-Optical Tracking Based Improved Robust Disturbance Observer
Flexible Dynamic Analysis of Hydraulic Excavator's Boom
A Wireless Human Pulse Wave Detecting System Based on LabView
Object Detection Based on the Frame Difference and Cellular Automata
Optimizing Design of Real-Time Spatial Moving Target Tracking System
Memory Depth of Processing Theory in Network Analysis of Design Tab
Dynamic Analysis of a New Type of Hydro-Viscous Drive Winch
Performance Characteristics Analysis of Supercritical Boiler Water Wall
A Study of the Automatic Formation Line of Li-Ion Power Batteries
Design of Control Circuit for Needle-Selected Mechanism of Knitting Machines
Investigation on Influence of Launch Depth to the Hydrodynamic Characteristics of the Cylinder out of the Tube
Secondary Source Modeling Based on Analogue Circuits of Electrical Mechanical and Acoustical Systems
Design of Magnetic Fluid Sealing Device and Computer Simulation in Sintering Machine
A Micro Wireless Attitude Determination System Based on the Extended Kalman Filter
Underactuated in-Pipe Robot for Moving inside Underground Oil Pipelines
The Motion Analysis of Traditional Belt Type Sintering Machine
The Design of Control System for Auto-Packing Pantyhose Machine
Study on High Accuracy Constant Tension Controller of Winding Machine
Research on Network Architecture of CSTA Based on P2P
Influence of Vibration on Automotive Interior Decorations Volatile Formaldehyde
Buffer and Vibration Optimization of Missile Data Recorder Structure
Design of Synthetic Diagnostic and Health Management of Launch Vehicle
The Method and Application of Time Series Prediction Based Wavelet Neural Network
Design Procedure of Robust QFT-Based Controller for Continuous-Flow Grain Dryer Plant
The Extracting System Design of Small Dim Targets in Complex Background
Based on Rotating Machinery Data Acquisition System Anti-Aliasing Filter Design and Application
Study on Integrated Setup System with Computer Vision for Breast Cancer Radiotherapy
ONAMA: A Quantum Leap in High Performance Computing
Optimization of Comprehensive Assessment Parameters System for Equipment Maintenance Quality Based on Principal Component Analysis
Developing Mechanical-Electrical-Hydraulic Integrated Equipment Based on Application Ability Training
Synthesizing Different Preference Information by Fuzzy Programming Method
Evaluation and Analysis on Benefit of College Resources Input of China
System Evaluation of Construction Operations in View of Ergonomics
Simulation of the Main Engine Remote Control System for Marine Education and Training
An Approach to Reconstructing 3D Solid Model and Generating Orthographic Views from the Two 2D Views Using AutoCAD
Research of SQL Server Automatic Marking Based on Logical Formal
Identifying Variables for Measuring Organizational Performance Relative to QMS Implementation in Chinese Defense Industry
Study on Pricing Method of Residential Development Project Based on Housing Mass Customization
Discussion of Quality Management of Large Complex Equipment under the Cross State of Development and Production
A Study on the Phenomenological Constitutive Models of AZ80 and AZ31 Magnesium Alloy Forming at Elevated Temperatures
Reason Analysis of Runway Incursions Based on Grey Theory
The Application of Mashup in PKM
Entropy-ANP-SSD Evaluation Model and Empirical Study about the Low-Carbon Development Level of Lead and Zinc Enterprises
Study on Situation Awareness in Aviation Ergonomics
An Application and Analysis for Regulation of Hydraulic System
A Fuzzy Model of Scenario Planning Based on the Credibility Theory and Fuzzy Programming
The Design of a New Network Cabling Experimental Instrument Based on Embedded System
The Study of Forewarning Management Control System on Coal Mine
The Applications of Direct Fluorinated HDPE in Oil & Gas Storage and Transportation
Performance Evaluation of Telecom Equipment Maintenance Outsourcers Based on Statistical Distance with Weight
Research on Problems and Basal Theory of Engineering Equipment's Maintainability Test
Research on Entrepreneur Spirit Cultivation and Construction
by "Nielsen BookData"
