Advanced materials and structures : selected, peer reviewed papers from the 2011 International Conference on Materials and Products Manufacturing Technology (ICMPMT 2011) October 28-30, 2011, Chengdu, China
Author(s)
Bibliographic Information
Advanced materials and structures : selected, peer reviewed papers from the 2011 International Conference on Materials and Products Manufacturing Technology (ICMPMT 2011) October 28-30, 2011, Chengdu, China
（Advanced materials research, v. 335-336）
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This collection of peer-reviewed papers brings together the latest advances and applications in the fields of composites, micro-/nano-materials, steel and iron, ceramics, metal-alloy materials, polymer materials, optical/electronic/magnetic materials, materials physics and chemistry, structural materials and functional materials.
Table of Contents
Preface and Committees
Chapter 1: Composites
Preparation and Properties of Nanocomposites Based on Poly(Vinyl acetate) and Montmorillonite Organized with Acrylic Acid
Mechanism of Silicon/Carbon Reaction for -SiC Bonded SiC Materials
Effect of Particles Diameter on the Properties of Ni Group ER Fluid
Effect of Magnetic Field Treatment on Temperature-Sensing Property of Polyethylene-Based PTC Composites
Preparation and Characterization of ZrO2/CNTs by Hydrthermal Method
Optical Properties of in-Doped Wurtzite ZnO Based on First-Principle
Preparation and Microwave Absorption Property of the Core-Nanoshell Composite Materials Doped with Nd
Illumination Control System and Drive Design of Large Power LED Lights
The Semantics of the Modern Ceramic Products
Graphene-Poly(Methyl Methacrylate) Composites Prepared by Two Methods
Fold-Resistant Characteristics of the Laminate Composites for Flexible Structure
Microstructural Observation of Ni-WC Surface Alloyed Carbon Steel
Study on the Precipitation Behavior of the Drill Pipe Steel Microalloyed with Nb
The Innovative Design of New-Style Clamping Automobile Tires Conveyance Based on TRIZ
Research and Application of New Oxygen Lance for BOF Steelmaking
In Situ Production of Fe-TiC Surface Composite
Preparation of a Simple Heat-Resistant Coating of the Optical Fiber Embedded in Composites
Synthsis of [1,2,5]thiadiazolo[3,4-C]pyridine: A Novel Analogue to BT
Preparation and Property of Epoxy Based Nano-SiO2/TiO2/Polyimide Hybrid Enhanced Sizing
Optimum Design of Composite Armor against Transverse Impact
Significant Enhancement of Triterpenoids Production by Phomopsis Elicitors in Cell Suspension Cultures of Betula Platyphylla Suk.
Preparation, Characterization and Properties of Crosslinked Chitosan/Palygorskite Resin with Tannic Acid as Template Molecules
Interfacial Combination and Mechanical Properties of BC/PVA Multilayer Composite Hydrogels
Effects of Phenolic Oligomer on the Dynamic Mechanical Properties of Nitrile Butadiene Rubber
Effect of Emulsified Asphalt on Temperature Susceptibility of Cement Asphalt Mortar
Studied Catalysis of CuO Nanocrystal on KClO4 Decomposition
Inserting the GS1 to HACCP System to Guarantee the Food Safety
Effect of Volume Fraction of Reinforcement on the Microstructure and Mechanical Properties of In Situ (TiB+TiC)/Ti Composite
Tribological Properties of Aluminum Alloy Coating Deposited on Magnesium Alloy Surface by Cold Spray
Effect of Aspect Ratio of Micro Sphere Lens Arrays on the Optical Property of Diffuser
The Mechanical Characteristics of Straw/poly(Lactic Acid) Composite Materials
Studies on Preparation and Methanol Permeability of PVDF-g-PAMPS Membrane
Activated Carbon Supported Iron Catalyst for the Fischer-Tropsch Synthesis
Study on the Synthesis and Characterization of Polylactic Acid/Maleic Anhydride Copolymer
The Preparation Method of Solid Electrolyte Lanthanum Fluoride Powder
Reaction Sintering of Carbon Fiber Reinforced Silicon Carbide Composite by Gel-Casting Method with Water Soluble Epoxy Resin as Gel Former
Buckling and Post-Buckling Analysis of Symmetrically Angle-Ply Laminated Composite Beams under Thermal Environments
Chemical Preparation and Characterizationof Polypyrrole-Polylactic Acid Conductive Composite Membranes
Mechanical Study and Microscopic Characterization of Lignin/PE Composites
Investigation of Phase Composition and Microstructure of the B4C/BN Nanocomposite Powders Fabricated by Chemical Reaction and Heat Treatment Process
Influence of Processing Temperature on the Failure Behavior of Fabricated Composites
The Thermal Properties of Polystyrene/Magnetic Polyhedral Oligomeric Silsesquioxane (POSS ) Nanocomposites Prepared under Magnetic Field
Effect of Microelements on Sn-20Bi Solder
The Preparation and Characterization of Solid Superacid S2O82-/SnO2-SiO2
Intercalation Lithium Behavior of Molybdenum Disulphide as Anode Materials for Lithium Ion Battery
Model Test Research on Subsidence of Geogrid-Reinforced and Pile-Supported Foundation
Analysis of Patch Bonded Repair to Carbon Fiber Composite Laminates with Low Velocity Impact Damage
Removal Soil Lead (Pb) from EDTA Leachate by Bentonite and Modified Bentonite
Study on Structures and Properties of CaSO4 Whiskers/PVC Composites
An Experiment Study on the Moisture Absorption and Desorption Characteristic of Humidity-Controlled Composite Building Blocks in Greenhouse
An Approach to Establish Interlaminar Micro Structure of 3-3 Connectivity in Laminated Composites
Preparation of Carbon-Encapsulated Alloy Nanomaterials by Detonation Decomposition of Nitrate Complex Explosives Containing Multi-Metallic Ions
A Simple Method to Disperse Carbon Nanotubes by Shearing Process
Preparation of Imidacloprid Microemulsion and its Formula Optimization
Effect of Ceramic Powder Size on Microstructure and Mechanical Properties of Ti(C, N)-Based Cermets
The Damage and Texture Features of High-Speed Rail(THS) Wheel Tread Based on EBSD
Evaluation Methods for the Dynamic Humidity Control Performance of Humidity-Controlled Composite Materials in Greenhouse
Research on Mechanical Properties of FML
Effects of Modified Carbon Nanotubes on Curing and Mechanical Properties of N-Phenyl Maleimide/Bismaleimide Composites
The Effect of Carbon Substrates on In Situ Synthesis Carbon Nanotube and Carbon Nanospheres by CVD Process
Researches on the Strength of Composite Material Barrels Based on Continuum Damage Mechanics
Numerical Simulation of the Change of Gas Hydrate Layer of Qinghai-Tibet Plateau in Global Warming Situation
Study on Threading-up Characteristics of Buttress Thread of Petroleum Coupling
Effect of 11S/7S Ratios on Mechanical and Barrier Properties of Edible Films Based on Soybean Protein Isolate
Preparation and Properties of Antistatic SMS Composite Nonwovens
Influence of AC Driving Current on Magneto-Impedance Effect in Glass-Covered Co-Based Microwire
Elastic Constants and Thermodynamic Properties of Cu, Cu2O and CuO from First-Principles Calculations
Performance of Concrete Made with Manganese Slag
Study on Using Numerical Method to Predict Wear Volume of Rail
Anodic Oxidized Titania Nanotubes as Drug Delivery
Crystallization Properties of Polypropene/Graphene Oxide Nanocomposites
Finite Element Analysis of Centrally-Debonded Composite Sandwich Beam under Four Point Bending
A New Test Setup for Experimental Test of RC Beams under Combined Shear and Torsion
Poly(Imino Ketone)s Containing Sulfone Group
Study on the Disaggregation of Photosensitizer Pentalysine -Carbonyl-Phthalocyanine Zinc In Vitro
Synthesis and Characterization of Nickel-Based Monolithic Aerogel via Sol-Gel Method
Research of Plastic Material Dynamic High-Speed Tensile Machine's Measurement and Control System Based on FPGA
Chapter 2: Micro/Nano Materials
Review on Research Status of Friction Stir Welding Technology
Coupling Grafting Modification of Nano-ZnO Using N,N'-Carbonyldiiimidazole as Activator
Injury on Blood Systems Caused by Silicon Dioxide Nanoparticles
Experimental Study on the Deformation Performance of Cement-Stabilized Macadam Reinforced with Fiber
Microstructures and Mechanical Properties of Cast Aluminum Bronze Enhanced by Modified Nano-SiC Powders
Effects of Liquid Nitrogen on Cryogenic Machining of Aisi D2 Hardened Steel
A Study on Mathematical Modeling Technology for Magnetic-Fluid Grinding
Research on Fibrillated Nanofibers and Application of High Efficiency Filter Material
Study of Oxidation and Passivation Behavior of Fe Noparticles
Preparation and Properties of Alginate Fibre
Effect of Bentonite Binder on Adsorption and Cation Exchange Properties of Granulated Nano NaY Zeolite
Controlling Aspect Ratio of Copper Group Nanowire Arrays by Electrochemical Deposition in the Nanopores of AAO
Preparation of Nano-CuS by Phase-Transfer Method and its Application to CuS Modified Electrode
Study on Properties and Cross-Linking Structure of NR Dried by Microwave
Research on the Process of a Green Method for Preparing the Alumina Nanofibre
A Simple and Sufficient Method to Fabricate ZnO Nanowire Thin-Film Transistors
Trial Research on the Engineering Properties of the Roaming Polyurethane
Hydrothermal Synthesis and Photocatalytic Properties of Flower-Like CdS Nanostructures
Influences of Additive Si on the Synthesis of Diamonds Using Fe Power as Catalyst
Effects of Hydrogen on Electrochemical Behaviors of X80 Steel in Simulated Soil Solution
Formulation of Vanillin Cross-Linked Chitosan Nanoparticles and its Characterization
The Controllable Flexible Features of ZnO Thin Film Gas Sensor
Finite Element Analysis of the Effect of Blank Holder Force on Deep Drawing of Bottom of Vacuum Flask
Tribological Property of Nano-Cu as Additive in Lubricating Oil
A Multi-Function Agent Used in Drilling Fluid and Completion Fluid MFA-1
Numerical Exploration of the Defect's Effect on Mechanical Properties of Nanowires under Torsion
First Principles Study on Shear Deformation of TIN/BN/TIN Interface
Corrosion Behavior of TP95S Anti-Sulfur Casing Steel in High Temperature High Pressure H2S/CO2 Environment
Study on the Precision Forging Processes of Gears Using FEM Analysis
Study on Antibacterial Efficacy and Catalytic Capability of Nanocrystalline Magnesia
Preparation and Characterization of ZnO Nanowire Arrays Grown on Different ZnO Seed Layers by Hydrothermal Method
Study on the Surface Quality of Fender NC Incremental Forming
Geometrically Nonlinear Analysis of Cross-Ply Laminated Composite Beams Subjected to Uniform Temperature Rise
Investigation on Dislocations in C-Plane Electron-Irradiated GaN Epilayers by Wet Chemical Etching
Soft Modeling of Wire Electrical Discharge Machining of WC-Co Composite
Chapter 3: Steel and Iron
Simulation and Experiment of Dynamics of Flange Structure with Bolted Joint
Analysis on the Influence of Vibration Performance of Air-Gap of Ceramic Motorized Spindle
Microstructure and Properties of Forging Engine Valve Seat
Study on Recarburization by a New Carbon-Manganese Alloy Carburant
Study on the Relations between the Structural Parameters and the Dynamics Properties
Effect of Solid Solution Treatment on Corrosive Action of 00Cr26Ni5Mo2Cu3Re Duplex Stainless Steel in Acid Stage
Novel Active Disturbance Rejection Control for Permanent Magnet Linear Synchronous Motor without Sensor
Microstructure and Mechanical Properties of 45 Steel by Zero Time Holding Quenching
Research on the CAD / CAM Collaborative Mode Based on the IOT
Precipitation Behavior and its Effect on Strengthening of High Strength and Toughness Drill Pipe Steel
Continues Cooling Transformation Behavior of Low Carbon Mn-Nb-B Steel
Web Based Dss for Inventory and Scrap Optimization in a Printing & Packaging Industry
Effects of Geometry on Aerodynamics of CFO
Performance of Externally Pressurized Dry Gas Seal
The Study on the Low Yield Strength for Super Fine Grain and High Strength Bearing Nb if Steel
Study on Kinematics and Simulation of Robotic Arm
Design of a Generic Postprocessor Based on UG
3-D Stress Analysis of Pneumatic Pen Cylinder with Preload in Mounting Nut
Size Dependent Pull-in Phenomena in Electro-Statically Actuated Micro-Beam Based on the Modified Couple Stress Theory
The FEM Analysis for Magnesium Alloy Honeycomb Panel
Influence of Carbon Content on the Microstructure and Precipitates of the V-N Microalloyed Steels
Dynamic Search Structure Failure Path Method Based on Element Birth and Death Technology for Overhead Traveling Crane
The Effect of the Native Oxidation on the Characteristic of Surface Electron in the In0.13Al0.87N Epilayer Grown by MOCVD
The Finite Element Analysis of Sandwich Variable Cross-Section Plate Bending Performance
Chapter 4: Ceramic
Effect of Gd2O3-Nd2O3 Compound Additive on Crystallization and Sintering of Fused Quartz Ceramic Materials
Synthesis and Luminescent Behavior of Mn(1-X)S:AX/ZnS Core/Shell Nanocrystals
Flaky and Porous Rod-Like MgO Powders Prepared by Molten Salt Synthesis
Influence of Temperature on the Densification and Lattice Parameters of Sialon Ceramic
Numerical Simulation for Flow Field in Hydrocyclone
Microstructure Simulation and Toughening Mechanism of Ceramic Tool Material
Influence of Nano-ZnO on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic Materials
Preparation and Microstructure of Pressureless Sintered Si2ON2-SiC Ceramic
Influences of Progressing Parameters on Flake BaBi4Ti4O15 Powder Synthesized by Molten Salt Synthesis Method
Preparation and Performance of Micro-Arc Oxidation Ceramic Coating of Titanium Alloy in Low Current Density
Effect of Si3N4-Y2O3 Compound Additive on Crystallization and Sintering of Fused Quartz Ceramic Materials
Technology Research of Silicon Carbide by Extruding
Effects of Monoclinic ZrO2 with Different Particle Size on Properties of Zirconia Refractories
Effect of Si3N4-Nd2O3 Compound Additive on Crystallization and Sintering of Fused Quartz Ceramic Materials
Study on Transitional Metal Oxides Energy-Saving Materials with High-Emissivity
Fabrication and Mechanical Properties of Nano-Al2O3 Based Composite Ceramic Tool Material
Chapter 5: Metal Alloy Materials
A Nonlinear Study on the Prestressed Structure of High Strength Concrete - Steel Fiber Concrete
Corrosion Behaviors of QSn4-3 under Two Kinds of Marine Advantage Bacteria Environment
Variance Analysis from an Inter-Laboratory Comparison about Different Emission Test Methods by a Certified Green Building Material in Taiwan
Preparation, Characterization and Properties of Ternary Blends with Epoxidized Natural Rubber, Poly (Lactic Acid) and Poly (Butylene Adipate-Co-Terephthalate)
The Microstructure and Properties of ZL116 Alloy Obtained by the Nearby-Liquidus Electromagnetic Casting
Effect of Heat Treatment and Composition on Grain Size and Lamellar Spacing of a Lamellar TiAl Alloy
EIS Study of Corrosion Behavior of Hot-Dip Galvanized Steel in 5% NaCl Aqueous Solution
Influence of Sr Addition on Microstructure and Mechanical Properties of Ignition-Proof AZ91D-0.3Be Magnesium Alloy
Numerical Analysis and Experimental Results by Silicon-Based MHz Ultrasonic Nozzles to Product of Monodisperse Droplets
The Porous TiNb24Zr4 Alloys with Controllable Porosity Fabricated by Conventional Sintering
Effects of Thermomechanical Treatment Process on the Microstructure and Properties of 7A04 Aluminum Alloy
Study on Fatigue Crack Propagation at Negative Stress Ratio in 2A12 Aluminum Alloy
Optimization Parametric Study of Deep Drawing Process for a Standardized Cranial Implant
Combination of Extrusion and Artificial Aging to Strengthen AZ80 Magnesium Alloy
Effects of Solution and Two-Stage Ageing Treatment Process on Microstructure and Properties of 6061 Aluminum Alloy
Electrochemical Behaviors of Pb-Ca Alloys and Pb-Ca-SnX-Al Alloys under 60 DegreesC in 5mol*L-1 H2SO4 Solution
Peritectic Reaction of High Nb and W Pentatomic TiAl-Based Alloy
Microstructure and Properties of Microwave Sintered 40 wt. % WC Steel-Bonded Carbides
Investigation on the Preparation Processes of Cu-Bi Master Alloy
Key Technology Development Trend for Recycled Aluminum Industry Based on Technology Roadmap
Preparation and Investigation on Properties of Shape Memory Epoxy Modified by Hyperbranched Polyester
Fabrication of Al2O3 Based Ceramic Matrix Composite by Conventional Sintering and Sol-Gel Process
Chapter 6: Polymer Materials
An Efficient and Environmentally Friendly Method for the Preparation of PMMA Microcapsules
The Analysis of Dynamic Viscoelastic Properties of Regenerated Cellulose at Different Temperature and Humidity
Ac Conductivity and Dielectric Properties of Hexanoyl Chitosan-LiClO4-TiO2 Composite Polymer Electrolytes
Synthesis and Properties of Polyurethane Modified with Hydroxyl Terminated Polysiloxane
Crystallinity and Mechanical Properties of PLA/POE Blends
Synthesis and Characterization of Thermotropic Main-Chain Liquid Crystalline Polysiloxanes Containing 1,4-butylene bi-p-hydroxybenzoate Mesogens
Design and Construction of Porous Structures in PVDF Membranes in Phase Separation Processes
Study on Preparing Light Colored C9 Petroleum Resins with High Softening Point
Application as Papermaking Retention Agent of Water in Water Cationic Polycaylamide in Bleached Soda Reed Pulp
Methanol Induced Changes in Structure and Properties of Dry Spinning Fibers of Regenerated Silk Fibroin
The Choice of the Simulation Skin in the Experiment of Dynamic Moisture Transfer Based on Munsell Color Index
Study on the Thermal Behaviors and the Morphology in PVP/ PA66 Blends
Development of Surface Roughness Prediction for Steel in CNC Turning by Using Response Surface Method
Chapter 7: Optical/Electronic/Magnetic Materials
Study on Electrochromic Performance of the Copolymer Based on 4-(1H-Pyrrol-1-Yl) Phenyl 4-(1H-Pyrrol-1-Yl) Butanoate with 3,4-Ethylenedioxythiophene
Fabrication and Magnetic Properties of Fe3O4 Nanobranches via a Simple Solvothermal Method
Synthesis and Characterization of Ln(Mg0.5Ti0.5)O3 (Ln=La, Nd, Sm) Obtained by the Polymeric Precursor Method
Synthesis, Spectra and Bond Studies on a Novel Cu-Ru Complex of Magnetic Dilution
Effect of Surfactants on Modifying the Surface of Magnetic Nanoparticles by Thermal Decomposition
Low Temperature Sintering of Ca0.6La0.8/3TiO3-Li0.5Nd0.5TiO3 Ceramics with ZnO-B2O3-SiO2 Glass Addition
Preparation and Characterization of Superparamagnetic Fe3O4 Nanoparticles with Controlled Sizes
Influence of Ar/O2 Ratio on the Prpoperties of Transparent Conducting ZnO:Zr Films Deposited by DC Reactive Magnetron Sputtering
Effects of Low Concentration BiFeO3 Additions on Microstructure and Piezoelectric Properties of (K0.5Na0.5)NbO3 Ceramics
Design and Preparation of Light-Weight Radar Absorbing Material Based on Resistive Frequency Selective Surfaces
Preparation and Luminescence Properties of the Nano- Composite Materials LaF3 - SiO2: Eu3+
Health Assessment Based on Fuzzy Synthetic Evaluation for Civil Aircrafts
Electrochemically Synthesis and Characterization of Copolymers Based on 1, 4-Diethoxybenzene and 3, 4-Ethylenedioxythiophene
Study on the Model of Magnetic Flocculation of Magneto-Rheological Fluid
Characterization of Cobalt Films on X-Ray Lithographic Micropillars
Magnitude of Intrinsic Electrocaloric Effect in PbTiO3 at High Electric Fields
Enhanced Luminescence Properties of Hexagonal-Phase NaYF4: Eu3+ Microrods by Annealing Treatment
Determination of Mechanics Properties of a Piezoelectric Material Using Indentation Method with a Cylindrical Indenter
Electrosyntheses and Electrochromic Properies of a Copoymer Based on 9-(4-Pyrrol-1-Yl-Phenyl)-Carbazole and 3,4-Ethylenedioxythiophene
Growth and Absorption Spectrum of Tm,Ho:BaY2F8 Crystal
Theoretical Study on Photochromism and Spectrum Properties of Spiropyran
Investigation on the Spectroscopic Properties of Yb3+-doped Phosphate Glass
The Game Analysis on Risks of Logistics Enterprises Participate in Logistics Finance
Chapter 8: Materials Physics and Chemistry
Theoretical Study on -Complexes in Ring-Chlorination of Toluene
Influence of Synthesis Technics and Additives on Cerium Ion Compound Valence
First-Principles Study on Electronic and Thermal Properties of Zinc-Blende Metal Telluride
Dyeing Properties of Acetylated Wood with Red Disperse Dyes
Photocatalytic Activity of Ag+-Doped TiO2 Thin Films Prepared by Sol-Gel Method
Relation between the Reflectivity and the Moisture Content of the Dynamic Moisture Transfer of Fabrics
Preparation and Thermal Decomposition of the Polyoxometalate Complexes of Ciprofloxacin with HnXW12O40 (X=B, Si, P)
Fundamental Characteristics of SiC MIS Structure with Al2O3 as Gate Dielectric
Synthesis and Characterization of Novel Fluorene-Based Poly(Imino Ketone)s
A Simulation of Half-Closed Extrusion Process for Steering Knuckle
Experimental Research on Products Preparation by Hongquan Bentonite from Gansu
Development of FE-Model for Al 5053 Sheet Plate Forming Using Electromagnetic Force
Photophysical Property Investigation of Nanometer Porphyrin Oligomer
Testing of Precast Lightweight Foamed Concrete Sandwich Panel with Single and Double Symmetrical Shear Truss Connectors under Eccentric Loading
Fabricate Dye-Sensitized Solar Cell with Electrospining
Chapter 9: Structural Materials
Researching about Removing Cadmium from Thallium-Bearing Materials with Vacuum Distillation
A Rural Residential Building Products Quality Evaluation Algorithm Based on Rough Set Theory
Experimental Research on Pore Structure of RCA and its Impact on Drying Shrinkage
Study and Analysis on Pile-Soil Stress Ratio of the Composite Foundation of Cement-Soil Mixing Pile under Flexible Foundation
Research on Fiber Shotcrete for Underground Engineering
Research on Environment-Friendly Soil Stabilizer Solidifying Buildings Residues for Paving Materials
Configuration of Low-Strength Self-Compacting Concrete Adapted to Local Raw Materials
Effect of Aggregate Pre-Wetting and Air-Entraining Agent on Durability of Lightweight Aggregate Concrete
Influence of Mineral Admixtures on Chloride Threshold Value for the Corrosion of Steel Reinforcement
A Novel Approach of Chitosan Additive to Remove Formaldehyde from Building Materials
Research on Impact Damage of Polypropylene Fiber Mortar Based on Axial Compressive Strength
Experimental Researches on Fire Resistance of CFS Shear Strengthened Reinforced Concrete Beams
The Effect of Fly Ash on Water Transport of Concrete in Dry State
About on Low-Alloy Coupled Steel Bars Concretes Rigidity and Crack Opening Model Formula Establishment
Utilization of Lightweight Aggregate from Expanded Obsidian for Advanced Thermal Insulating Plasters Production
Study of Prediction Model for Compressive Strength of Lightweight Aggregate Concrete
Method Study on Generation-Dissipation of Seismic Pore Water Pressure in Saturated Sands
Study on Inorganic Cohesive Glue
The Sucrose-Natural Gypsum Makes the Compound Retarder to the Cement and the Concretes Performance Influence Experimental Study
Experimental Research on Isothermal Sorption of RAC Material
Research on the Mechanisms of Soil Agent Solidifying Buildings Residues
Research on Seismic Behavior and Cost Estimation of a New Concrete Filled Steel Tube Frame Structure
Chapter 10: Functional Materials
Fabrication of Fuel Cells with High Power Density Using Micro Electrical Discharge Machining Milling
Influence of the Strain of AlN Buffer Layer on the Strain Evolution of GaN Epilayer Grown on 3-in 6H-SiC Substrate
Research on Slaked Magnesium Slag as a Raw Material and Blend for Portland Cement
Bioactivity and Biocompatibility of Na2O-K2O-CaO-MgO-SrO-B2O3-P2O5 Borophosphate Glass
Fabrication and Preparation of Coal-Water Slurry Dispersant with Amphoteric Polycarboxylate
Effect of Electrical Characteristics Modification on Viscosity of Kaolin Suspension
Realization of a Wideband Microwave Noise Filter Used Magnetic Multilayer Thin Films by Using Exchange Bais Stacks Structure
Study on Operation and Control of Large Multi-Chiller System
Constructing a Syntheses Table of the Standard Amino Acid Based on the PAM250 Matrix
The Development of UMo/Al Dispersion Fuel
A Technology of Self-Emulsification Coacervation to Prepare Starch Sodium Octenyl Succinate (SSOS) Microcapsules Consisting of Evening Primrose Oil (EPO)
Isothermal and Non-Isothermal Crystallization Behavior of Poly(L-Lactic Acid) with Nucleating Agents
Study on the Polyol Synthesis of LiFePO4 for Lithium Ion Batteries
Manufacture of Carbon Supported PtCuLaOX Membrane Electrode with Low Pt Loading by IBS Technology
Application of Magnetite Mill Tailings and Solvay Distiller Waste in Foamed Concrete In Situ
The Foreground Analysis of Sewage Sludge Agriculture Application in China
Experimental Investigation on Simply Supported PFRP Channel Beams Subjected to Three-Point Loading
Sp2 Hybridization Effects on Friction of Diamond-Like Carbon Film (110) Surfaces Studied by First Principles Molecular Dynamics
Experimental Study of Magnetorheological Elastomer Vibration Isolator
Deinking Technology and Deinking Agent of Waste Paper
Preparation and Application of Talc-Fiber Composite Fillers in Paper-Making
Experimental Application of Salt Slurry in Zhongyuan High Density Polymer Saturated Brine-Based Drilling Fluid
Synthesis of Flavor 3-Methylthiopropionaldehyde Diethyl Acetal
Net-Like ZnO/Carbon-Aerogel Composite as Anode Material for Ni-Zn Secondary Battery
Synthesis of LiFePO4/C by Carbon Thermal Reduction Method and its Electrochemical Properties
Study of EDLC and its Usage in Stand-Alone Photovoltaic System
Design and Optimization of Injector Structure in Diesel Engine Based on ISIGHT Platform DOE Methods
Flocculation Removal of Microcystis Aeruginosa by Chitosan-Bentonite Compound Material
Photocatalytic Degradation of Methylene Blue over Co-Ag3VO4 under Visible Light Irradiation
Water Barrier Property of Gelatin-Based Films Cross-Linked with Microbial Transglutaminase
Effect of Drying Treatments on Anthocyanin, Fumonisin B1, Aflatoxin B1 Content of Anthocyanin Extract from Purple Corn (Zea may L.) in North China
The Role of CdS Buffer Layer in ZnO Nanowire Arrays/SnS Thin Film Solar Cells
Preparation of Cu2ZnSnS4 Film by Printing Process for Low-Cost Solar Cell
Investigation of Thermal Insulation Materials Based on Easy Renewable Row Materials from Agriculture
Ferroelectric Property of Ion Beam Enhanced Deposited Lithium Tantalate Thin Film
The Effect of Concentration of Phosphoric Acid on the Degree of Reduction of VPO Catalyst
Extraction Behavior of Rare Earths in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and Benzoyl Acetone
The Influence of Alkyl Group on Needle Coke Formation
Preparation and Properties of PLA Microspheres Containing ENRO by an S/O/W Emulsion Technique
Dependence of Hysteresis Loops on Thickness of Thin Nickel Films Prepared by RF Sputtering
Hydrolysis of Glucose to 5-Hydroxymethylfurfural
Preparation of Porous HA Bioceramics by Gelcasting and Pressureless Sintering
Characteristics Analysis of Acoustic Emission Signals from Titanium under Tensile Fracture
Recovery of Sc3+ from Red Mud Leaching Solution by Emulsion Liquid Membrane
The Study of Using TiO2 Nanotube Arrays as a Drug Delivery for Alendronate
Cutting Parameters Optimization Based on Radial Basis Function Neural Network and Particle Swarm Optimization
Preparation and Properties of Bacterial Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) Fibers
Research on Controllable Effects of HI Ultrasonic Radiation to Active Composition in Hippophae
The Modification of VPO Catalyst Precursor and Characterization
Biosorption Behavior of U(VI) in Wastewater Containing U(VI) by Immobilized Saccharomyces Cerevisiae
Preparation and Characterization of Poly(Lactic Acid) / Montmorillonite Nanocomposites via a Masterbatching Method
Effect of Pretreatment of Traditional Chinese Medicine Residue on the Biogas Productivity
Effect of Conformable Substrate Thickness on an Eddy Current Sensor Array's Output Characteristics
Photocatalytic Activities of Mo Ions Implanted TiO2 Thin Films
Preparation and Properties of Polytriphenylamine/Multi-Walled Carbon Nanotube Composite as a Cathode Material for Li-Ion Batteries
Evaluation on Combustion Properties of Nanoparticle as Fuel Additive
Managing Product Quality and Reliability under New Challenges
Energy Consumption and Emissions Analysis of Natural Gas Exploitation
by "Nielsen BookData"
