Mechanical and aerospace engineering : selected, peer reviewed papers from the 2nd International Conference on Mechanical and Aerospace Engineering (ICMAE 2011), July 29-31, 2011, Bangkok, Thailand

著者

• International Conference on Mechanical and Aerospace Engineering
• Fan, Wu

書誌事項

Mechanical and aerospace engineering : selected, peer reviewed papers from the 2nd International Conference on Mechanical and Aerospace Engineering (ICMAE 2011), July 29-31, 2011, Bangkok, Thailand

edited by Wu Fan

（Applied mechanics and materials, v. 110-116）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4
• Part 5
• Part 6
• Part 7

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). These proceedings comprise fully-refereed papers presented at the conference. The main conference theme was Mechanical and Aerospace Engineering, and the main goal of the event was to provide an international scientific forum for the exchange of new ideas in a number of fields and for in-depth discussions with peers from around the world. Core areas of mechanical and aerospace engineering are covered, together with multidisciplinary, interdisciplinary research and applications; thus making the work an excellent guide to those topics.

目次

• Preface and Organizing Committees Chapter 1: Materials Behavior Combustion and Performance Analysis of Single Cylinder DI Diesel Engine Using Jatropha Biodiesel and its Blends The Effects of Calcium Excess, Water Amount and Mixing Time on the Injectability of Calcium Phosphate Filling Materials Pile Capacity in Homogeneous Unsaturated Sand Layer A Comparative Performance Study of Soot Formation Models in Methane Elevated Pressure Non-Premixed Flames Computational Calculation of Thermal Efficiency in a Space Radiating Fin for Tow Different Materials Computational Analysis of Fatigue Crack Propagation at Elevated Temperature for IN718 Nonlinear Elasto-Plastic Analysis of Axisymmetric Spherical Shell by Chebyshev Spectral Collocation Method under the Pulsating Forces The Application of Non-Esterified Biodiesel in a Diesel Engine Study on the Addition of Viscous Agents to Fish-Boat-Fuel in Real Ship Trials Effects of Assembly Pressure on the Gas Diffusion Layer and Performance of a PEM Fuel Cell Study of Self Phase Modulation in Chalcogenide Glass Photonic Crystal Fiber Analysis and Comparison of Dispersion Properties of Hexagonal and Square Lattice Photonic Crystal Fiber Study of Natural Frequencies and Characteristics of Piezoelectric Transformers by Using 3-D Finite Element Method In House Construction of an Induction Motor Rotor by Using 0.35mm Thickness of Steel Sheet for Efficiency Based Investigation Horizontal Distribution of Illuminance with Reference to Window Wall Ratio (WWR) in Office Buildings in Hot and Dry Climate, Case of Iran, Tehran Thermodynamic Analysis of Hydrogen Production from Ethanol in Supercritical Water Oxidation The Mechanical Strength of Granular Sulphur and its Relation to Size Distribution and Storage Silo Clogging Numerical Solution of an Edge Cracked 2-D Piezoelectric Media Using Extended Finite Element Method Experimental Study on Combustion and Pollution Characteristic of Gas Oil and Biodiesel Dynamic Characterization of Non-Homogeneous Magnetorheological Fluids Based Multi-Layer Beam Hygrothermal Buckling Response of Laminated Composite Plates with Random Material Properties: Micro-Mechanical Model Study of the Heat and Mass Transfer in a Dehumidification of Liquid Desiccant Extent of Three Parameter Zone and Optimum Strain Gage Location for Eccentric Cracked Configurations Performance Evaluation of Thermal Interface Material for Space Applications The Effect of Preheated Crude Palm Oil on Performance and Emission Characteristics of a Compression Ignition Engine Thermomechanical Analysis in FG Rotating Hollow Disk Ammonium Perchlorate Decomposition Characteristic Parameters Determination, a Simplified Approach Development of a Variant of Scalar Constitutive Equations Suitable for Description of the near Super-Plastic Regimes of Deforming Dielectric Properties of Polyester Reinforced with Carbon Black Particles Optical Absorption of Polyvinyl Alcohol Films Doped with Nickel Chloride Completable Filiform Lie Algebra Derailment Analysis of High-Speed Railway Vehicle Bogies Effect of Abrasive Flow Rate in Milling with Abrasive Water Jet Enhancement of Welded Joints Productivity Effect of Welding Position on Fatigue Strength Driving Characteristics of a Simple Square-Frame Ultrasonic Motor Generating Characteristics of a Cantilever-Type Unimorph Piezoelectric Generator Depending on the Material and Mass Tribological Characteristics in Modified Magneto-Rheological Fluid MHD Convection of an Electrically Conductive Fluid with Variable Thermal Conductivity Design and Traction Performance of the Track Device Circling Driving Wheel for Truck Antiwar and Extreme Pressure Characteristics of Quinazolin-4-Ones Derivative as the Potential Lubricating Oil Additive Simultaneous Optimization of Multiple Quality Characteristics in Electrical Discharge Diamond Cut-Off Grinding (EDDCG) Models for Component Commonality in Multistage Production Performance Analysis of an Otto Engine with Ethanol and Gasoline Fuels Effect of Ethanol-Air Equivalence Ratio on Performance of an Endoreversible Otto Engine Effect of Plasticizers on Ion Transport Properties of PEO+NH4PF6 Polymer Electrolyte System - Dielectric Studies A Competition Chemostat with General Variable Yield and Growth Rates in the Presence of a Internal Inhibitor RETRACTED: Studies of Asymmetric Hysteresis Loops and Leakage Current Behaviors in Pt/Al2O3/SiO2/Si /PZT/Au Structures Prepared by MOCVD Method Stochastic Trajectories of Beads in the Galton-Board Coexistence of Superconductivity and Magnetism Study of Adsorption Properties of O2, CO2, NO2 and SO2 on Si-Doped Carbon Nanotube Using Density Functional Theory Preliminary Investigation on Atmospheric-Induced Stress Corrosion Cracking of British Intermediate Level Nuclear Waste Containers: Residual Stress Analysis and Four Point Bend Exposure Test Crake Effect on the Dynamic Characteristics of Elastically Coupled Beams The Effect of Pre-Ageing on the Mechanical Properties of AA6061 Sheet Products Macro Characteristics of the Spray from Intersecting Hole Nozzles Free Vibration Analysis of a Fiber Reinforced Mindlin Plate by Using Ritz Method Characteristics of Lean and Stoichiometric Combustion of Compressed Natural Gas in a Direct Injection Engine Effects of Different Liquid Properties on the Characteristics of Impact-Generated High-Speed Liquid Jets Cubic-Interpolated-Pseudo-Particle Method to Predict Dynamic Behaviour of Fluid in Shear Driven Cavity Optimum Design of Guide Positions for Decreasing the Permanent Deformation of a Cockpit Module Boiling and Convective Heat Transfer Characteristics of Nanofluids Transient Thermal Behavior of Hot-Mix Asphalt Pavement Steady Hydrodynamics and Thermal Behaviors of Fluid Flows in Micro - Parallel Plates (Couette Flows) Determination of Mass Properties for the VX-SAT Communication Satellite A Comparative Study of Two Preconditioners for Solving 3D Inviscid Low Speed Flows Effect of EGR on the Exhaust Gas Temperature and Exhaust Opacity in Compression Ignition Engines Using Jatropha Oil as Fuel The Influence of Different Turbulence Models on the FlowField Characteristics of an Aerospike Nozzle Crushing Behavior of Composite Hexagonal Ring System Star Grain Regression under Spin Induced Acceleration Effect Effect of Acid Treatment on Silica-Titania Aerogel as Oxidative-Acidic Bifunctional Catalyst Dispersive Correction to Casimir Force at Finite Temperature CdS-Intercalated Bentonite: A Novel Sulfide Ion Selective Electrode Effects of N2 Pressure on Properties of Titanium Nitride Films by Filter Cathodic Vacuum Arc for Bipolar Plates in PEM Fuel Cells Characteristics of Shock Initiation of Single-Shell and Double-Shell Casing Charges Coulomb and Exchange Interaction Effect on Magnetic Properties of MnO Nanoimprint Photonic Crystal Film Enhanced Light-Trapping in a-Si Thin Film Solar Cells Electrical Characteristics Investigation of Transient Plasma Ignition Silver Nanoparticles Supported on Ordered Mesoporous Carbon for Formaldehyde Electrooxidation Effect of Propanetriol on the Electrochemical Behavior of Nano Fumed Silica Gel A Renewable Amperometric Immunosensor for hs-CRP Based on Functionalized Fe3O4@Au Magnetic Nanoparticles Attracted on Fe (III) Phthlocyanine/Chitosan-Membrane Modified Screen-Printed Carbon Electrode by a Magnet Characterization and Cytotoxicity Studies of Mixed Cu-La-Ce Nanocomplexes Prepared by Coprecipitation Approach Chemical Bonding in Photocatalytic Niobates and Tantalates Nanostructured Mesoporous Thick Films of Titania for Dye-Sensitized Solar Cells Synthesis of ZnO with Different Morphology and its Photocatalytic Property Magnetoresistance Effects for the Inhomogeneous Perovskite System of Ag Doped La0.833Na0.167MnO3 Photocatalytic Activity of TiO2 Nanotube Modified by Cobalt Photoluminescence and Raman Scattering of Cu-N Codoped ZnO Thin Films Physical Property and Thermal Physical Property of Microencapsulated Phase Change Material Slurry A New Hydrogen Peroxide Biosensor Based on Hrp/Ag Nanowires/Glassy Carbon Electrode Optical Properties of One-Dimensional Multi-Layered Structures Containing Plasma Materials Effects of Negative Bias on the Structure of Ti Film and its Adhesiveness to the Base by Plasma Effect of Montmorillonite and Maleic Anhydride Grafted Polypropylene Content on Polypropylene/Wood Flour Composites Hot Vacuum Tribological Properties of Chromium Nitride Coatings against Austenitic Stainless Steel Type AISI 316LN and Colmonoy Tensile Properties and Microstructural Evolution of Friction Stir Processed Extruded AZ31B Alloy Investigation and Modeling of Compaction Behavior of Plain Fabrics Wear Characteristics of Manganese Phosphate Coating with Oil Lubricant Behavior of Carbon and Nitrogen after Low Temperature Thermochemical Treatment on Austenitic and Duplex Stainless Steel Investigating the Effects of Varying Proportions of Waxes in Wax Mix on Surface Roughness and Optimization by Taguchi Method Low Velocity Impact Analysis on GFRP Laminates under Different Temperatures Chapter 2: Casting and Solidification Effect of Pressure on Structure and Properties of Lost Foam Casting of Al-11Si Cast Alloy Analyzing Oscillating Input Flow around a Circular Cylinder Comparison of Hybrid Rapid Mouldings for Zinc Alloy Castings Simulation Study of Two Alternative Workstations for Pressure Die-Casting Process The Combine Effect of Copper and Nickel on Tensile Strength of Ductile Iron Comparison of PID and Fuzzy Controller for Automobile Suspension System Thermoeconomic Optimization of Cascade Refrigeration System Using Refrigerant Pair R404A-R508B A Genetic Approach for Optimization Design of Gear System in Co-Rotating Twin Screw Extruder Analysis of Smoke Agglomeration and Droplet Breakup in SRM Entrance Region Flow of Casson Fluid in a Circular Tube Simulations of the FORMOSAT-5 Cold Gas Propulsion System by Using the Hybrid Continuum-Particle Method A Novel Cupped Solid-State Wave Gyroscope Chapter 3: Powder Metallurgy and Ceramic Forming Surface Modification Using Electric Discharge Machining (EDM) with Powder Addition Optimization of Alkaline Activator/Fly ASH Ratio on the Compressive Strength of Manufacturing Fly ASH-BASED Geopolymer Active Tendon Vibration Control of Cantilevered Beam Using Shape Memory Alloy (SMA) Actuators Chapter 4: Surface, Subsurface and Interface Phenomena The Effect of Cutting Parameters on Surface Integrity in Hard Turning The Effect of Surface Roughness on Sursulf, Gas and Plasma Nitride Coatings on Austenitic Stainless Steel Type AISI 316LN Surface Plasmon Polaritons: Propagation Characteristics of Surface Plasmon Waves on Au and Ag at Optical Wavelengths Viscous Potential Flow Analysis of Rayleigh-Taylor Instability of Cylindrical Interface Experimental Surface Profile of Dense Granular Media in Cylindrical Couette Flow Numericl Analysis Supersonic Cavity Unsteady Flow Bead Geometry Optimization of Submerged Arc Weld: Exploration of Weighted Principal Component Analysis (WPCA) Methods for Creating Uniform Irradiance for LED Luminaries with the Use of Reflectors Effect of X-Ray Computed Tomography Scanning Parameters on the Estimated Porosity of Foam Specimens Workpiece Surface Generation with Wavelet Filtering Using CLSM Temperature Field of Repetitive Laser Pulse Irradiation and its Effect on Laser Surface Hardening A New Optical Technique for Surface Roughness Measurement of Tio2 Thin Films Natural Convection in a Porous Medium Rectangular Cavity with an Applied Vertical Magnetic Field Using Lattice Boltzmann Method Study of the Parameters in Electro-Discharge Diamond Face Grinding through Response Surface Methodology Approach Prediction of the Temperature of Enclosures for Nuclear Waste Disposal The Critical Current of the Superconductor Having an Array of Hole with de Gennes Boundary Condition Alfven Surface Waves in a Partially Ionized Resistive Medium Calculation of Viscosity Coefficient of Moderately Dense Fluids from the Modified SAFT-BACK Equation of State Super Accelerated Flow in Diverging Conical Pipes Effect of Vanadium Contaminated Fuel on Bond Coat and Bond Coat/Top Coat Interface of Thermal Barrier Coatings Enhanced Sensitivity of Microcantilever Surface Stress Sensor The Processing Method and Discuss of Curved Surface Based on Spatial Linkage Mechanism Comparison of Different Bearing Couples of Hip Resurfacing Prostheses: A Finite Element Study Experimental Analysis of Wear and Friction Characteristics of Jatropha Oil Added Lubricants Inertial Flow Phenomenon Analysis on Piezoelectric Pump Effect of Hydrostatic Pressure and Depth of Fluid on the Vibrating Rectangular Plates Partially in Contact with a Fluid The Laminar Boundary Layer on a Moving Cylindrical Rod with an Applied Magnetic Field Investigation of Shielding Effectiveness Caused by Incident Plane Wave on Conductive Enclosure in UHF Band Optimal Design of Non-Monotonic Heat-Conducting Thin Adhesive Layer Based on Imperialist Competitive Algorithm Find the Optimum Shape Design of Externally Pressurized Torispherical Dome Ends Based on Buckling Pressure by Using Imperialist Competitive Algorithm and Genetic Algorithm Energy Saving Inverter Controlled Magnetic Jack Research on Interference of Electromagnetic Radiation on Micro-Strip Line A New Model for Constriction Resistance of Rough Contacts between Nominally Flat Surfaces Determining of Infrared Transition of InN Film Grown on C-Plane Sapphire by Photoreflectance High-Resolution TEM Observation of AlN/GaN Grown on Si Substrates Synthesis and Formation Mechanism of Solid and Hollow Alumina Microspheres at the Water-Oil Interface Effect of Synthesis Condition on the Solubility of Surface-Modified Calcium Borate Nanoparticles Coupling between Localized Surface Plasmons in Metal Nanoparticle Waveguides Surface Plasmon Polaritons Excited by Narrow Beam in Kretschmann Structure First Principles Study on the TiN/BN/TiN Interface Self-Collimation in Square Lattice Two Dimensional Photonic Crystals with Ring-Shaped Holes Synthesis of Ag Core @ Au Shell Composite Nanoparticles by Spontaneous Deposit Au on the Surface of Ag Seeds Surface Effects Considerations for the Design of Casimir Actuated Nanoswitches Chapter 5: Coatings and Surface Engineering Research of Aerodynamic Performance of HP-Turbine with Coolant Injections for Variable Cycle Engine Exergetic and Energetic Response Surfaces for Small Turbojet Engine Determining New Baselines of Wear Material in Diesel Engines, Using Oil Analysis Results Integrating EIS and Wavelet Multi-Resolution Analysis
• Part 1: Enhancing Monitoring of Nonconductive Coatings Application of Fuzzy Rule-Based Model to Predict TiAlN Coatings Roughness A Computational Investigation of Thermal Effects on Resin Coating Flows in an Optical Fiber Drawing System Preparation of Amorphous Silicon Oxide Nanowires by the Thermal Heating of Ni or Au-Coated Si Substrates Structural Changes of UHV Deposited Titanium Thin Films in Presence of Oxygen Flow and Temperature Investigation into Electrorheological Fluid-Assisted Polishing Optical Glass Research and Analysis of a Laser-Type High Temperature Pressure Sensor Based on SiC Diaphragm Experimental Study of Relationship between Wave Interfacial Instabilities and Mechanical Strength of Three-Layer Polymer Structure Computer Simulations of Galvanic Corrosion Behaviour of Zinc -Aluminium Based Composites Reinforced with Red Mud by Potentiodynamic Polarization Techniques Leading to Corrosion Control Research on Vibration-Reduced Characteristics for Dry-Friction Damping Material of Metallic Rubber Study of the Distributed Ground-Tunnel Pressure Measurement and Control Method Effect of Dye Coating Duration on the Performance of Inverted Type Organic Bulk Heterojunction Solar Cell Based on Eosin-Y Coated ZnO Nanorod Arrays Chapter 6: Composite Materials Acoustic Absorption Characteristics of Closed Cell Aluminium Foam Nonlinear Self-Excited Combustion Oscillations of a Premixed Laminar Flame Fatigue Life Assessment of Fastened Composite (FRP and CRP) Plates: A Comparative Study Computational Investigation of Delamination in HAT-Section Laminated Composite Components Micromechanical Analysis of Nonlinear Viscoelastic Unidirectional Fiber-Reinforced Composites Relationship between Interfacial Instabilities and Tensile Stress of Three-Layer (PP/HDPE/PP) Polymer Structure - An Experimental Study Band Gap Optimization by Ga and S Additions in CuInSe2 for Solar Cell Absorber Applications Synthesis and Enhanced Proton Conduction in a 20 mol% Ytterbium Doped Barium Zirconate Ceramic Using Zn as Sintering Aid The Variations of Cu/Ga Ratio on the Structural and Optical Properties of Cu(In, Ga)Se2 Thin Films by Co-Evaporation Technology Enhancement of Soil Thermo-Physical Properties Using Microencapsulated Phase Change Materials for Ground Source Heat Pump Applications Fabrication and Thermo-Mechanical Analysis of Pure Silver-Electrode Ionic Polymer-Metal Composite (IPMC) Actuator Effect of Ag Doping in 2205 Duplex Stainless Steel on Corrosion Resistance Study of Wear Assessment and Optimization of Multiple Properties of Red Mud Filled Polyester Composites Composite Materials Damage Characterization under Quasi-Static 3-Point Bending Test Using Fuzzy C-Means Clustering Bending Analysis of Composite Sandwich Plates with Flexible Core Using 3D Finite Element Method The Effect of Nanotube Specifications on Multi-Scale Modeling of Nanocomposites Micropower Generators and Sensors Based on Piezoelectric Polypropylene PP and Polyvinylidene Fluoride PVDF Films - Energy Harvesting from Walking The Investigation of Electret Film Durability in Polyethylene Terephthalate (PET) from a Certain Angle of their Application as Pressure Sensors Effect of Niobium/Molybdenum Microalloying on SS316LN Steel Simulation BeSe Nanowires in Two Phasese Zinc-Blende and Wurtzite Using Density Functional Theory DIP Coated Thick Films of SnO2 and it's Ethanol Sensing Properties Optimal Actuators Locations in Smart Fibre Reinforced Polymer Structures Using Genetic Algorithm Sinterability and Mechanical Properties of MnO2-Doped Y-TZP: The Effects of Holding Time Variations Manufacturing of High Toughness Hydroxyapatite Produced by Wet Chemical Method Numerical Analysis on Impact Behavior of Composite Sandwich Plates as Energy Harvesting Structures The Effect of Quenching in Polymer and Addition of 0.1% Zr on Properties of Al-5.6% Zn-2.5%Mg-1.6%Cu Alloy Mechanical Properties Analysis on Elongation Type of Pneumatic Artificial Muscles A Study of Basic Aluminized Propellants Characteristics Effect of Abrasive Medium Ingredients on Finishing of Al Alloy and Al Alloy/SiC Metal Matrix Composites Using Rotational Abrasive Flow Finishing Comprehensive Characterization of Large Piezoresistive Variation of Ni-PDMS Composites Study on Mixed-Mode Interlaminar Fracture of Laminated Composites An Energy Model for Fatigue Life Prediction of Composite Materials Using Continuum Damage Mechanics Composite Materials Manufacturing Processes Preparation of Jatropha Biodiesel Using Hydrotalcite Catalyst and its Performance on Diesel Engine Effect of Quenching Media and Ageing Time on Al6061-Beryl Composites Effect of Oxidizer-Fuel Mixture Ratio to the Pressure Exponent of Ammonium Perchlorate Based Composite Propellant Cooperative Sensitization on Silver Bromoiodide (AgBr/I) GrainsEmulsion by Oxalate and Sulfur-Plus-Gold Investigation into the Electromagnetic Interference Shielding Effectiveness of Silicon Rubber Filled with Carbon Fiber Theoretical Study on Cation Vacancy Induced Magnetism in Bulk ZnO Study on the Sol-Gel Process of TEOS by React-IR Preparation and Properties of CdS Thin Films Deposited by Chemical Bath Deposition Synthesis and Characterization of Ce1-xZrxO2 Nanopaticles Study on Photocatalytic Degradation of X-3B by TiO2 Nanotube Arrays Chapter 7: Materials Forming Ball Milling of WC-Co Powder as Injection Molding Feedstock Finite Element Analysis of Formability of Metallic Sheets in High-Velocity Forming Processes Numerical Prediction of Forming Limit in Hemispherical Punch Bulging by Lemaitre's Ductile Damage Model Quality, Reliability and Maintenance (Q, R & M) Issues in Reconfigurable Manufacturing Systems (RMS) A Functional-Based Stack-up Design System for Stamping Dies Bending Analysis of SMA Embedded Rectangular Laminated Sandwich Plates with Soft Core Using 3D Finite Element Method Improving the Quality of Thermoforming Process Using a Proposed Analysis Algorithm (A Case Study) Investigation of Load Path Effect on Thickness Distribution and Product Geometry in the Bulge Hydroforming Process A Study on the Stability of a Mast Structure for Erecting a Large Crane Anti-Windup Compensation for Embedded Cylindrical-Array Magnetic Actuator A Study on the Stability of Curvic Coupling for Distance to Disk in a Mill Turret Drag Prediction on DLR-F6 Wing-Body Configuration Numerical Simulation of Multi-Roll Stretch Forming Process with Different Lubrication and Rollers Finite Element Study of the Effect of Canal Diameter on the Stress Distributions in Post-Core Restored Endodontically Treated Maxillary Incisor The Effect of Pressure Induced Hoop Stress on Bi-Axially Loaded through Wall Cracked Cylindrical Structures - A Strain Based Method The Effects of Airfoil Camber on Flutter Suppression Regarding Timoshenko Beam Theory Research on the Basic Mechanical Behavior of Masonry Structure Chapter 8: Machining Near Time Optimal Path Control of Kinematically Redundant Manipulators with Bounded Joint Velocities and Torques Multi Objective Optimization of Electro Discharge Machining of Resin Bonded Silicon Carbide Investigations on Tool Wear in Micro Ultrasonic Machining Engineering Applications of Satellite Structural Optimization Utilizing ANSYS/CATIA Influence of Non-Uniform Sinusoidal Periodic Bottom Boundary Condition on Natural Convection in an Isotropic Porous Enclosure Design and Assembly of an Experimental Fixed Wing Remote Controlled Glider Plane Wind Tunnel Experiment for Low Wind Speed Wind Turbine Blade A Solution about Shifted of the Involute Spline Base on some Mechanical Transmission Synthesis of ZnO by Mechanical Activation and Make the Varistor Noise Reduction of the Transient Electromagnetic Weak Signal under Strong Noise Based on Power Detection of EMD Effect of Periodicity of Non-Uniform Sinusoidal Side Heating on Natural Convection in an Anisotropic Porous-Enclosure A Continuous Control of Cutter Posture Change for Efficient 5-Axis Machining of Impeller Cutting Performance of Turning Insert with Three-Arcs-Shaped Finishing Edge A Digital System Implement for Aircraft Sheet Metal Cutting Investigation of Process Capability of a Reaming Operation Using Statistical Tools Parametric Optimization in Electrochemical Machining of EN-31 Steel Based on Grey Relation Approach Effects of Coolants on Improving Machining Parameters while Mach-Inability Titanium Alloy (Ti-6Al-4V): A Review Optimum Length for Pin Fins Used in Electronic Cooling Capability of Advanced Abrasive Waterjet Machining and its Applications Performance Measurement and Data Analysis of Material Removal Rate for Wire Cut Electro Discharge Machining Process Multi Response Optimization of the Hole Punching Process Parameters in the Leaf Spring Assembly Using the Grey Taguchi Method and Simulated Annealing Algorithm Determination of Stress Distribution around Two Carbon Nonotubes Embedded in Infinite Metal Matrix Using Nonlocal Theory of Elasticity Symptom Based Analysis for Carpal Tunnel Syndrome in Assembly Line Workers Using ANOVA with Orthogonal Array Experimental Investigation and Finite Element Analysis on Electromagnetic Compression Forming Processed Aluminum Alloy Tubes A Framework for a Feature Based Machining Using Macro Fabrication of Sn-Doped ZnO Varistor by Solid State Processing A New Design for the Shuttle Fuel Tank The Study of Column Separation in Pumping Stations Determination of Ascorbic Acid Based on a Platinum Nanoparticles Modified Au Electrode Preparation of Strontium Ferrite Powders by Mechanochemical Process Comparison of Welding Distortions between TIG and MIG Welding Technique in Pipes Hydroforming Developments: Insights of other Researchers Numerical and Experimental Investigation of Influence of Weld Line Orientation on Formability in Deep Drawing of Tailor-Welded Blanks Briquetting of Saw Dust Improved Mayr Model of Electrical Arc Furnace to Analyse Harmonic Bioethanol Production from Sweet Potato Using Combination of Acid and Enzymatic Hydrolysis An Experiential Optimization Design Method for Orthogonal Rib-Stiffened Thin Walled Cylindrical Shells under Axial Loading Effects of Injection Initial Conditions and Length-to-Diameter Ratio on Fuel Propulsive Droplets Sizing in a Duct ANFIS for Predicting Surface Roughness in Turning Operation Performed on CNC Lathe Indian and International Scenario on Research in Thermal Error Minimization in CNC Machine Tool Study on Kerf Width in Wire-EDM Based on Taguchi Method Multi-Objective Optimization of Die-Sinking Electric Discharge Machining Chapter 9: Nanomaterials and Nanomanufacturing Effect of Internal Heat Source on the Onset of Convection in a Nanofluid Layer Fluidization Behavior of Alumina Nano-Particles Modeling and Simulation of Nano Structures Based on Molecular Dynamics Influence of TiO2 and ZrO2 Nano Particles Addition in Al2O3 Base Coating Using Plasma Spraying Performance Evaluation of PCD 1300 and 1500 Grade Inserts on Turning A356 Alloy with 20% Reinforcement of SiC Particles Molecular and Electronic Structure of 1-Naphtol : Ab Initio Molecular Orbital and Density Functional Study Thermoelastic Damping in Clamped-Clamped Annular Microplate Study on the Thermal Characteristics of Heat Pipes with Water-Based MWCNT Nanofluids Study on First-Principles of Nano-Materials Named Manganese Oxide Performance Analysis of Nanoscale Double Gate MOSFETs with High- Gate Stack Synthesis of Silver Nanoparticles by a Sonochemistry Method Useful for Two-Dimentional Nanoparticle Arrays Preparation of Nano-Ru/[Bmim][BF4] Catalyst and its Application in the Benzene Selective Hydrogenation Visible-Light Driven BiFeO3 Nanosized Photocatalysts Prepared by a Sol-Gel Process Low Temperature Growth of Patterned ZnO Nanowires and their Field Emission Characteristics Anisotropic Nanocomposite Hydrogels with High Mechanical Strength Using Hydrophilic Reactive Microgels and Self-Assemble One-Step Hydrothermal Synthesis and Characterization of ZnO Nanopowders Preparation of TiO2 Nanopowders by Non-Hydrolytic Sol Gel and Solvothermal Synthesis Chapter 10: Biomedical Manufacturing A Comparison of Kinetic Modeling of Fermentable Sugar Production from Walnut Green Skin as a Source of Energy Efficient Feature Selection Model for Gene Expression Data Efficacy and Safety Testing of a New Biologically Based Design Ankle Foot Orthosis in Healthy Volunteer Effect of Plant in Two Atrium Building Comfort: Report on Two Field-Monitored Case Studies Thermal Study of the Nickel Ion Interaction with Myelin Basic Protein Thermal Study of Lysozyme Binding with -Cyclodextrin Thermal Investigation of P-Phenylene-Bis and Phenyl Dithiocarbamate Binding to Mushroom Tyrosinase Productivity Improvement in Plastic Bag Manufacturing through Lean Manufacturing Concepts: A Case Study Corrosion Problems in Sugar Factories in Mauritius Fuzzy Based Automatic Insulin Injector Simulation Aided by Online Doctor Consultation Using LabVIEW A Mathematical Model for Indigenous Microbial Enhanced Oil Recovery in Anaerobic Metabolic Process Impact Deposition of Radon Progeny (218Po ,214Po and 210Po) on the Surface of Human Blood: In Vitro Study Development of a Portable Drug Delivery System Using Iontophoresis for Alopecia Treatment ILL Effects of Tuberculosis Drugs: No More a Problem Chapter 11: Environmentally Sustainable Manufacturing Processes and Systems Multi-Objective Approach in Exergoeconomic and Environmental Optimization of the Gas Turbine Cycle Weibull and Hargreaves Methods to Determine the Wind and Solar Energy - Case Study Maximum Power Point Tracking for Solar PV System Water Consumption Reduction by Application of Treated Hygienic Sewage of Yazd Combined Fuel Power Plant to Irrigate the Green Space, Iran Wastewater Treatment for a Sustainable Future: Overview of Phosphorus Recovery Controlling CO2 Emissions from Power Plants: A Environmental View Nuclear Fusion and the Moon as a Source of Power for the World - Possibility of 3He Fusion and the International Quest for the Moon Application of Lean Tool (Value Stream Mapping) in Minimisation of the Non-Value Added Waste (A Case Study of Tractor Industry) Effects of Wind on Hot Air Recirculation (HAR) Behavior Zero Energy Building Using Solar Energy in Building from the Viewpoint of Sustainable Architecture Transfer of Lean Manufacturing to China - Lessons from Two German-Chinese Production Plants Performance Evaluation of Quality Drying in a Natural Convection Grain Dryer Dual Fuel Performance Studies of a Small Diesel Engine Using Green Fuels Effects of Water and Steam Injection on Thermodynamic Performance of Gas-Turbine Systems Vortex Induced Vibration for Aquatic Clean Energy Phosphoric Acid Effect on Prepared Activated Carbon from Saudi Arabia's Date Frond Waste The Effect of H2S on Hydrogen and Carbon Black Production from Sour Natural Gas On the Characteristics of a Novel Floating Sub-Atmospheric Solar Water Desalination System A Novel Method to Identify the Nox Emissions of Commercial Aircraft during Descent Analysis of Energy and Exergy of an Annealing Furnace A New Approach to Exergy Analyses of a Hybrid Desiccant Cooling System Compares to a Vapor Compression System An Experimental Study on Banana Drying Using a Combined Rejected Heat from Split-Type Air Conditioner and Solar Energy A Method for Generating Electricity by Fast Moving Vehicles Research on Injection-Production System's Effectiveness of Completely Fractured Well Arrangement Electronic Structure of h-WO3 and CuWO4 Nanocrystals, Harvesting Materials for Renewable Energy Systems and Functional Devices PI Controller Based for Frequency Control in a Smart Grid with Solar Cell System Chapter 12: Rapid Manufacturing Technologies Technical Development on Rapid Green Silicone Rubber Mold The Analysis and Improvement of Hydraulic Control System of Sealant-Spreading Machine Utilization of Advanced Manufacturing Technologies in an Indian Manufacturing Enterprise Chapter 13: Nontraditional Manufacturing The Development of Very Light Jet with Unconventional Arrangement An Exact Solution of Unsteady MHD Free Convection Flow of a Radiating Gas Past an Infinite Inclined Isothermal Plate Experimental Evaluation of Cooking Oil (Carotene Oil) as Biodiesel Blended on Compression Ignition (CI) Engine Research of Configuration Design for Supercavitating Vehicles Optimization of Support Material and Build Time in Fused Deposition Modeling (FDM) Usage of Nuclear Reactors in Space Applications - Space Propulsion and Space Power Concepts Developing the Proper Form of Objective Function to Be Applied in Gradient Optimization Technique for Designing Continuous Radiation Ovens A Systematic Design of Tilting Pad Journal Bearing for a 1.2MW Turboblower Application of Homotopy Perturbation Method for Harmonically Forced Duffing Systems Adaptive Nonlinear Teleoperation with Time Delay Using Modified Wave Variable Based Controller Producing Hydrogen through Electrolysis Progress on Reflective Terahertz Imaging for Identification of Water in Flow Channels of PEM Fuel Cells Facile Enrichment and Photocatalytical Degradation of Low Concentration MB in Aqueous Solution Chapter 14: Modeling, Analysis and Simulation of Manufacturing Processes Design of Compliant Mechanisms of Distributed Compliance Using a Level-Set Based Topology Optimization Method Design a Fuzzy Logic Based Speed Controller for DC Motor with Genetic Algorithm Optimization Dynamic Analysis of Sandwiched Composite Foldable Structure under Heavy Vehicle Load Investigation of Geometrical Defect of AA6061-T4 Cold Embossing Using FEM Dynamic Analysis of the Bioprosthetic Heart Valve on Different Fixation Identification of Replica Modes in Integrally Bladed Rotor Study of Development Status and Future Development Proposals for Pulse Soild Rocket Motor Determination of Flow Characteristics and Turbulent Heat Transfer in a Ribbed Roughened Square Duct, Part 1: Turbulence Models Determination of Flow Characteristics and Turbulent Heat Transfer in a Ribbed Roughened Square Duct, Part 2: Numerical Simulations A Method for Simulation of a Cryogenic Liquid Propellant Engine Experimental Investigation of Oil Film Thickness for Hydrodynamic Journal Bearings Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem Exergetic Destruction Effects of Operating Conditions on the Turbojet Engine Components Dynamic Parameter Identification Using Ambient Response Analysis and Ibrahim Time Domain Approach: A Case Study on a Steel Plate Structure Transverse Vibration of Non-Uniform Euler-Bernoulli Beam, Using Differential Transform Method (DTM) Analytical Study on Wear Interaction between Rail-Wheel Finite Element Analysis of Corroded Truck Chassis Using Sub Modeling Technique Analysis on Dynamic Fault Tree Based on Fuzzy Set Analysis of Sustainable Development of Inner Mongolia Wind Power Modeling and Analysis for Powertrain Dynamics of Electric Vehicle Systems Finite Element Stress Analysis of Optical Fiber due to Mechanical Expansion of Hydrogel Coating Wide Input Voltage Range 2kW Flyback Resonant Converter Design for Wind Turbine Adaptive Decision Making Algorithm for Protection of Series Capacitor Compensated Line Modeling and Optimization of Heat Recovery Heat Exchanger Electrical Simulation and Characterization of Shunts in Solar Cells Modeling and Simulation of a Moving-Coil Linear Generator Modeling and Simulation of Moving Iron Linear Generator (MILG) Design and Construction of Pic-Based Excitation Control System for Generator Implementation of New Fission Barrier Model in TALYS Code The Design and Simulation of Wind Turbine Grid Controller CFD Simulating Research of Integrated Solar Building Skin Development of Object-Oriented Direct Simulation Monte Carlo Code for Modeling of Rarefied Flow around Geometries of Arbitrary Shapes Contribution to Rolling Bearing Reliability Modeling Design and Manufacturing of Sun Motion Simulator Applied to Satellites Attitude Determination Suboptimal Guidance and Control Design for a Missile with Onboard Strapdown Seeker Active Flow Control over the Car Flow Maldistribution in a Simplified Plate Heat Exchanger Model - A Numerical Study A Modified Wave Approach for the Calculation of Natural Frequencies and Mode Shapes of the Rods with Variable Cross Section Modeling and Analysis of the Grinding Parameters Improved Air Turbo Rocket for Space Applications Application to Orbital Vehicles and Reentry Gear Fault Identification Using Artificial Neural Network and Adaptive Neuro-Fuzzy Inference System Experimental Study of Cloud Formation Simulation of the Mathematical Model of a Quad Rotor Control System Using Matlab Simulink Complete Powertrain Torsional Vibration Simulation and Correlation with Phisical Measurement Orthogonal Test Design and Numerical Simulation of 100QJ10 Type Deep-Well Pump Empirical Modeling of Turning Parameters Using Grey Relational Analysis Design of Experimental Platform to Simulate Spacecraft Dynamics Computational Aero Elastic Modelling of Airframes and Turbo Machinery Structural Aspect of Symmetry and its Effect on Generation of Planetary Gear Trains Analysis of a Complex Shape Chain Plate Using Transmission Photoelasticity Design Anemometer with Transistor Optimization of Non-Uniform Optical Waveguide in MOEMS Accelerometer Numerical Modeling and Design of Thermoelectric Cooling Systems Modeling and Control of Ultra Precision Positioning System for a Grating Ruling Machine A Bayesian Method for Model Optimization in Structural Equation Models with Mixed Continuous and Ordered Categorical Data Optimization of Highly Non-Linear Simulation Functions Using Improved Adaptive Response Surface Methodology An Efficient Stochastic Approximation Algorithm and Model Selection for a Class of Nonlinear Random Effect Models with Incomplete Responses A New Approach for Simulation of Annular Two-Phase Flow Considering the Four Involved Mass Transfer Mechanisms (Annalytical Concept) FEA of Residual Stresses in Butt Welded Type Low Carbon Steel Using MMAW Technique Sedimentation Load Analysis Using ANN and GA An Interpretive Structural Modeling Approach for Analysis of Interactions among the Barriers in Reverse Logistics Three Dimension Finite Element Model for Neck-Spinning Process of Tube at Elevated Temperature A Study of Springback in U-Bending Process Using the Finite Element Simulation and Experimental Approach Forming Force Analysis in Fine-Blanking Process by Experimental Approach and Analytical Formulation Dynamic Modeling of Energy Efficient Crab Walking of Hexapod Robot Real-Time Computer Simulation of Three Dimensional Elastostatics Using the Finite Point Method Thermal and Coolant Flow Computational Analysis of Cooling Channels for an Air-Cooled PEM Fuel Cell Numerical Simulation of Cavitation and Aeration in Discharge Gated Tunnel of a Dam Based on the VOF Method Running Model for a Compliant Wheel-Leg Hybrid Mobile Robot by Using a Mass-Spring Model Modeling and Simulation of a Freeze Concentration Technique for Sugarcane Juice Concentration Real Time Reliability Study of a Model with Increasing Failure Rates Numerical Analysis of Thermoelastic Instability in Disc Brake System A New Approach to Kinematics Modelling of Snake-Robot Concertina Locomotion Mode Analysis of End-Milling Process by Recursive Least Square Algorithm Finite Element Modeling of Natural Gas Pipeline Structure in Response to External Loads Influence of Background Color on Visual Inspector Performance in 3-Dimension Simulation Model Heat Transfer Approach to Modelling and Analysis of Reverse Logistics Inventory Models Statistical Modeling Approach for Optimization of a Stationary Hook Hopper Analytical Solution for Centrifugal Force Effect in Functionally Graded Hollow Sphere FEM Modeling of Beams Cyclic Loading Based on Ziegler-Prager and Armstrong-Frederick Kinematic Hardening Models Effects of Cut-Off Ratio on Performance of an Endoreversible Dual Cycle Modeling and Calculation of the Algorithm Structure of Compound Semiconductor-Type A3B5 Research on Self-Similarity Network Traffic Modeling Study on a Robust Optimization Model for Project Scheduling Policies More Reliable Lifetime Distribution of System: A New Statistical Heuristic Model with Numeric Case Study The Effects of Fuel Injection Angle and Injection Velocity on Propulsive Droplets Sizing in a Duct Modeling Abrasion Resistant Materials by Modeling Large Sliding Frictional Contact Instantaneous and Time-Averaged Flow Structure around Two Heated Square Cylinders in the Laminar Flow Regime Design of a New Biomimic Flow Pump Using SMA Actuators Influence of Training with and without Reward on Visual Inspector's Performance in 3 Dimension Model Derivation of Equal Area Criterion and its Application to Crack Tip Plastic Zone Analysis Multi Objective Optimization of Turning Process Using Grey Relational Analysis and Simulated Annealing Algorithm Investigation of Effects of Changing Blade Position and Size Reduction on Performance of Axial Pump Used as Turbine Tip over Stability Analysis of a Three-Wheeled Mobile Robot Capable of Traversing Uneven Terrains without Slip The Selection, Designing and Analysis of Heavy Duty Tractor Gearbox (ITM8200) A New Mathematical Model Toward Project Selection-A Case Study Modeling of Weld Dilution in Gas Metal Arc Welding Process Using Taguchi's Design of Experiments Failure Mode and Effect Analysis of a Thermal Power Plant for Enhancing its Reliability Thermal Errors Modeling of a CNC Machine's Axis Using Neural Network and Fuzzy Logic Modelling and Control Techniques for a Shorted Turn to Improve High Frequency Coil Response Free Vibration Analysis of Functionally Graded Moderately Thick Annular Sector Plates Using Differential Quadrature Method Transient Radiative Heat Transfer Analysis of Turbid Tissues Subjected to Short-Pulsed Irradiations Dynamic Modeling and Simulation for Battery Electric Vehicles under Inverter Fault Conditions An Insight into Combustion Process in a Spark Ignition Engine Using Three Dimensional Modeling Analysis of Radiative Heat Flux for Nozzle Flow Comprehensive Study of Typical Metamodel Methods Applied in Aircraft Multidisciplinary Design Optimization Investigation of Various Parametric Geometry Representation Methods for Airfoils Interpretive Structural Modeling (ISM) of Bolted Joint Subjected to Dynamic Loosening under Soft Foot Condition Educational Software for Stress Analysis of an Aircraft Fuselage Physical Simulation on Temperature and Pressure Fields during Steamflooding through Horizontal Wells in Heterogeneous Reservoir Elastic Exploring Law Analysis of the Deep Vuggy Reservoir Modeling and Analysis of the Current Generated by Compensatory Anticathode in the Electric Fields Protection of Ship The Special Chao and Singularity in a Simple Traffic Model Study of Determining the Concentration of Hydrogen Sulfide in Air by Methylene Blue Spectrophotometric Method Numerical Simulation for Part Effect of Ventilation of Extra-Long Road Tunnel Electron Spin in Quantum Hall Effect in AlxGa1-xas: D. C. Tsui's Data Reduced Master Equation for Modeling of Ferromagnetic Single-Electron Transistor 3D Model of the Planetary System Feasibility Analysis of Gas Storage in JB Area Caprock Evaluation Chapter 15: Meso/Micro Manufacturing Equipment and Processes Fabrication of High Aspect Ratio SU-8 Microstructures on Piezoelectric Transducers Frequency Effect on SEU of D Flip-Flop Thermal Behavior of a Flow in a Pulsed Detonation Thermal Spraying Device Studies on the Effect of Approach Angle and Process Parameters in Face Milling Condensate Migration Dynamics into Porous Bed in a Nonperforated Chamber Tool Design and Speed Parameters Effects on Microstructure and Tensile Strength of Friction Stir Welding (FSW) 5052 Al Alloys Prediction of Weld Bead Dilution in GMAW Process Using Fuzzy Logic The Leveling Position Control of a Four-Axial Active Pneumatic Isolation System Using PWM-Driving Parallel Dual-On/Off Valves The Solution of Lateral Heat Loss Problem Using Collocation Method with Cubic B-Splines Finite Element Influence of Thermal Simulated and Real Tandem Submerged Arc Welding Process on the Microstructure and Mechanical Properties of the Coarse Grained Heat Affected Zone Feature Selection of Acoustic Emission Signal for the Slow-Speed and Heavy-Load Equipment Study on Intelligent Control System of Mechanical Press Robust Control of DC Motor Using Fuzzy Sliding Mode Control (FSMC) Fuzzy-Based Gas Turbine Engine Fuel Controller Design Using Particle Swarm Optimization Energy Economical and Environmental Analysis of Industrial Boilers Using VSD Experimental Investigation on Improving the Aerodynamic Performance of Swept Aircraft by DBD Plasma Study on Intersection Criterion of MEFP Warhead to Target Study of Laminar Horseshoe Vortex Using Particle Image Velocimetry Optoelectronic Properties of Vanadyl phthalocyanine Based Organic-Inorganic Hybrid Devices Physical Parameters that Influence the Effectiveness of Ionizing Radiation at Low Doses Numerical Investigation of Droplets Breakup in a Microfluidic T-Junction Work around Moore's Law: Current and next Generation Technologies Study of Two-Step Electroless Etched Si Nanowire Arrays Copper Indium Silicon Nanocomposite Thin Film Deposited by Magnetron Co-Sputtering Synthesis of some New Lariat Ethers as Molecular Motors The Fixed Point and Hyper Order of Solutions of Higher Order Nonhomogeneous Linear Differential Equations with Meromorphic Function Coefficents Effect of Casting Design to Microstructure and Mechanical Properties of 1 mm TWDI Plate Chapter 16: Modeling, Analysis, and Simulation of Manufacturing Processes II Generalized Early Voltage Model of Bipolar Transistors for Linearly Graded Germanium in Base Quantum Spectra and Classical Orbits in Artificial Atom Rotation Invariance for Spatial Dispersion Property of the Elastic Constants The Equivalent Numerical Simulation of Fractured-Vuggy Carbonate Reservoir An Analytical Model for the Subthreshold Current of Fully Depleted Strained-SOI MOSFET Model of Electron Scattering of Strained Si /Si1-xGex (100) PFCHA: A New Moving Object Tracking Algorithms Based on Particle Filter and Histogram Optimized Design of Parameters for Wedge-Crystal Depolarizer Phenomenological Model for Pyroelectric Effects of Nano Graded Ferroelectric Films Modeling and Simulation of VCSEL's Turn-on Delay Based on Rate-Equations Three-Dimensional Numerical Simulation and Experimental Study of Severe Plastic Deformation of AZ31 Magnesium Alloy Degradation of Metal-Supported SOFC and One Powerful Investigation Method: Multi-Scale Modeling and Simulation Stability and Bifurcation Analysis in a Food Chain Model with Delay A New Method for OLED Optical Output Simulation Experimental Analysis of the Influence of Length to Diameter Ratio on Erosive Burning in a Solid Tubular Propellant Grain Force-Line Driving Model for Robot Application of Roe's Flux-Difference Splitting for Turbulent Reacting Flow with k- Turbulence Model Optimum Size of a Ground-Based Cylindrical Liquid Storage Tank under Stability and Strength Constraints Using Imperialist Competitive Algorithm Imperialist Competitive Algorithm for Multiobjective Optimization of Ellipsoidal Head of Pressure Vessel Optimum Critical Buckling of Functional Graded Plates under Non-Linear Temperature by Using Imperialist Competitive Algorithm CFD Simulation for a New Ducted-Fan UAV Configuration The Dynamics Analysis and Vibration Measuring of the 5-DOF Magnetic Suspension Flywheel Study of Heat Affected Zone (HAZ) in Gas Metal Arc Welding (GMAW/MIG) Process A Simple Analytical Model to Simulate Oblique Ballistic Impact onto Fabric Artificial Intelligence Model of Surface Roughness for End Milling Operation of Steel and its Verification by Genetic Algorithm Exergoeconomic Analysis of a Steam Power Plant in Iran Chapter 17: Precision Molding Processes Prediction of Laminar to Turbulent Flow over a Sweptback Wing Unsteady Flow past a Combined Pitching and Plunging Aerofoil Using an Implicit RANS Solver Mass Transport in a Microchannel Bioreactor with a Porous Wall Design and Analysis of Flapping Wing Flutter Analysis of Wing, Booster Fin and Vertical Tail Effect of Sheet Thickness on Magnitude and Distribution of Magnetic Force in Electromagnetic Sheet Metal Forming Process Effects of Cyclic Loading on Interface of Liner and Propellant Pipe Displacement by High Order of Accuracy Method Inverse Kinematics with 3-Dimensational Tool Compensation for 5-Axis Machine Center of Tilting Rotary Table Effects of Screw Fastening Sequence to Top Cover Loosening in Hard Disk Drive Assembly The Determination of Efficient Super Finishing Conditions for the Mirror Surface Finishing of Titanium Analysis of Process Parameters of Plasma Arc Cutting of Stainless Steel Using Taguchi Method Data Acquisition and Preparation Methods for Continuously Cast Billets Quality Analysis Software Experimental Investigations of Cutting Conditions Influence on Main Cutting Force and Surface Roughness Based on Chip Form Types in Cast Nylon Turning Direct Metal Deposition of Stainless Steel Wire Using Metal Inert Gas as Heat Source for Repair Purposes Optimization of GMAW Process Using Imperialist Competitive Algorithm Adaptive Dynamic Surface Control of a Supersonic Flight Vehicle Optimal Control for Combined Energy Storage and Attitude Control System (CEACS) in Small Satellites Nonlinear Dynamics of Rotors due to Large Deformations and Shear Effects Recent Advances in Ultraprecision Diamond Turning of Non-Rotationally Symmetric Optical Surfaces Chapter 18: Joining Processes Forced Vibration Behavior of Adhesively Bonded Single-Lap Joint The Study of Residual Stress in Welded Specimens of Aluminium Alloy by Using Acoustic Emission Method A Genetic Algorithm Approach for Multi-Product Multi-Machine CONWIP Production System Chapter 19: Nanofabrication, Nanometrology and Applications Study of Electroosmotic Flow in a Nanotube with Power Law Fluid Mechanochemical Synthesis of Hydroxyapatite Nanopowder: Effects of Rotation Speed and Milling Time on Powder Properties Preparation of Dense Biphasic Calcium Phosphate Ceramics Using Eggshell Derived Nanopowders Effect of Nanoparticle Concentration on Thermo-Hydraulic Behavior of a Nanofluid in a Horizontal Tube with Constant Heat Flux and Mass Flow Rate Numerical Study of Laminar Mixed Convection of a Nanofluid in a Horizontal Curved Tube with Constant Heat Flux and Mass Flow Rate Analytical Solution of Electrokinetics Driven Flow in a Nanotube with Power Law Fluid by HPM Al2O3-Water Nanofluids in Convective Heat Transfer Breakup of Droplets in Micro and Nanofluidic T-Junctions Mixed Convective Heat Transfer Flow of Nanofluid past a Permeable Vertical Flat Plate with Magnetic Effects: A Finite Element Study Modeling and Simulation of Controlled Manipulation by AFM Nano Robot Micro Electrochemical Machining of Tungsten Carbide Prediction for Constitutive Relationship of Metallic Rubber with Various Parameters by BP Neural Net Designing a Multi Echelon Flexible Logistics Network Using Co-Evolutionary Immune-Particle Swarm Optimization with Penetrated Hyper-Mutation (COIPSO-PHM) Fluidization of Geldart Type-D Particles in a Swirling Fluidized Bed Flow Characteristics of Nanofluids According to Nanoparticles Shape The Formation of Diamond-Like Carbon Film at Atmospheric Pressure by the Pulsed Laser/Plasma Hybrid Deposition Method Research of the Technological Parameters Importance for Plasma Arc Thermal Cutting One-Dimensional Harmonic Oscillator in Quantum Phase Space Property Comparison of CuInSi Films Prepared by Multilayer Synthesized and Magnetron Co-Sputtering Self-Assembly of Nano-Sized Spherical Polyelectrolyte Brushes on Different Substrates as Observed by AFM Nano Technology/Networks in Molecular Communication: An Advance Step of Electrical Communications Nanostructure Multilayers as Broadband Antireflection Coating Used at Terahertz Frequencies Region Photocatalytic Hydrogen Generation of CuO and WO3 Co-Loaded TiO2 Nanotubes Crystallization Time Dependence of Nanohybrid Shish-Kebab Structure in HDPE/PA66 Nanofibers Composites via Solution Crystallization Preparation of Nano-Coenzyme Q10 by Water Jet Comminution Immobilization of Nano-TiO2 on Expanded Perlite for Photocatalytic Degradation of Rhodamine B Synthesis of NanoTiO2/CTMAB-Expanded Perlite Applied to the Degradation of Methyl Orange Synthesis of Nano Machines Based on Catenanes and Rotaxanes New Method for Preparing Rubber/Clay Nanocomposites Structure and Properties of Hydrogenated Nitrile-Butadiene Rubber/Organo Montmorillonite Nanocomposites The Study of Nano Optical Antenna Based on Surface Plasmon Resonance Buckling Behaviors of Imperfect Single-Walled Carbon Nanotubes: A Molecular Dynamic Simulation A Novel Method of Developing ZnO-Based Nano Hetero Strucutre on Flexible Substrate for UV Photo Detecting Application Nanosize Beta-Spodumene Glass-Ceramic Powders Synthesized by Sol-Gel Route A Study on the Nanotechnology Researchers' Information Needs and Information Retrieval Behavior Nano-Particles in Concrete and Cement Mixtures Production of Transparent Heat Windows of TiO2/Ag/TiO2, and Investigation of their Nanostructures The Analysis of Ag Nanospheres and Arrays LSPR Phenomena Based on DDA and FDTD Method The Comprehensive Utilizing Method for Urban Rain-Flood Based on Nanotechnology Turbulent Convective Heat Transfer of Nanofluids Two-Phase Study of Fluid Flow and Heat Transfer in Gas-Solid Flows (Nanofluids) Nanocomputation of Mechanical Properties in Nanobio Membrane Nanocomputational Observation of Interaction of Two Cytotoxins and Nanobio Membrane: Molecular Dynamics Simulation Study Chapter 20: Manufacturing Process Planning and Scheduling Construction of Advanced Equipment Manufacturing Base with International Competitiveness A New Solution Seed for Job Shop Scheduling Problem Minimizing Total Weighted Tardiness on Parallel Batch-Processing Machine Scheduling Problems with Varying Machine Capacities Hybrid Flow Shop Scheduling Problems with Multiprocessor Tasks Advanced Cost-Efficient Production Scheduling in Hi-Tech Manufacturing Industry at Test Operation A Genetic Algorithm-Based Approach for Flexible Job Shop Scheduling Developing Capability-Based Virtual Cellular Manufacturing Systems and Comparison with Capability-Based Classical Cellular Manufacturing Systems The Study of Lean Layout in an Automotive Parts Manufacturer Systematic Layout Planning to Assist Plant Layout: Case Study Pulley Factory A Study of Relationship between Competency Program and Mold and Die Occupation A Hybrid GA-SA Algorithm for Multi-Objective Sequencing Problem in High-Product Mix Shop-Floor A Stochastic Savings Algorithm for Vehicle Routing Problem with a Centralized Distribution Center and Delivery Time Window Output Regulation of the Liu Chaotic System Multi-Criteria Decision Making for Mechanic Product Design Schemes Based on Layered Ordinal Relation Analysis A Framework for Implementing Lean Manufacturing System in Small and Medium Enterprises The Evaluation of Priority Rules in Operations Scheduling Viability of Lean Manufacturing Tools and Techniques in the Apparel Industry in Sri Lanka Application of Statistical Process Control Tools to Improve Product Quality in Manufacturing Processes Total Quality Cost Reduction in Head Stack Assembling Overall Maintenance Time Reduction by Optimizing the Distance of Service Center in Manufacturing Unit through Single Facility Location Planning Hybrid System Model Simulation Framework for Cyber-Physical Systems An Investigation of Lean Implementation Status in Thai Manufacturing The Application Effect Analysis of Lean Production in China Minimizing the Number of Tardy Jobs in Flow Shop Sequence Dependent Setup Times Scheduling Problem Towards Lean Factory-Combining Lean Thinking with Promising Manufacturing Method - A Case of Finnish Boating Industry Research on Intelligent Variable Frequency of Air-Conditioner Control System Based on Fuzzy Control A New Fuzzy Approach for Minimizing Conveyer Stoppages in Mixed-Model Assembly Lines Metal Parts Visual Inspection Based on Production Rules Path Planning of UAVs in Urban Region Using Pythagorean Hodograph Curves Designing and Fabricating of Low Cost Thermoelectric Power Generators Chapter 21: Laser Based Manufacturing Neuro Fuzzy Modeling of Laser Beam Cutting Process The Use of Laser Scanning Technology to Improve the Design Process Study of Atmospheric Channel Charateristics in Space Laser Communication System Study of Nuclear Magnetic Resonance on Imbibition Mechanics of Conglomeratic Cores The Analysis of the Two-Wire Transmission Line in a Cavity with Apertures Illuminated by a Plane Wave Based on Electromagnetic Topology Study of End Surfaces' Deformation and Thermal Stress in Solid State Laser A Ray Transfer Matrix Model for an Elastomeric Lens Chapter 22: Metrology and Measurement Study on the Status of Offshore Oil Storage Technology and Non-Pollution Oil Storage Technology Underwater The Effect of Canard on Aerodynamics of Blended Wing Body New Approach to Salve Single Event Upsets Faults in Satellite Communications Parametric Study of an Ideal Rankine Cycle with a Reheat Creep Analysis in Anisotropic Composite Rotating Disc with Hyperbolically Varying Thickness Nonlinear Effects on Resonance Behaviour of Beams in Micro Scale Study of Heat Transfer and Hydrodynamics in a Gas-Solid Fluidized Bed Reactor Experimentally and Numerically Extracting Modal Parameters of Constrained Structure from Free Test Data Miniature Test Technique for Acquiring True Stress-Strain Curves for a Large Range of Strains Using a Tensile Test and Inverse Finite Element Method Finite Element Analysis of Cantilever Beam for Optimal Placement of Piezoelectric Actuator Parameter Optimization of a Snake Robot Using Taguchi Method Optimization of Shrinkage in Plastic Injection Molding Process Using Statistical Methods and SA Algorithm Research on Design for Testability of Marine Diesel Engine Reliability Analysis of a Small Pneumatic Cylinder Life Computational Fluid Dynamic Analysis for Modified Steam Duct in Air Cooled Condenser Fault Detection in Tennessee Eastman Process Using Fisher's Discriminant Analysis and Principal Component Analysis Modified by Genetic Algorithm The Effects of Object Independent Vibration on Visual Identification Efficiency Numerical Investigation of Flow past a Wavy Airfoil The Optimization Design of Hospital Bed Structure for Independently Separating Left and or Right Leg Using Genetic Algorithms Numerical Scheme for Fredholm Integral Equations Optimal Control Problems Determination of Complex Permittivity of Fly Ash for Potential Electronic Applications Effects of Aeroelastic Nonlinearity on Flutter and Limit Cycle Oscillations of High-Aspect-Ratio Wings A New Genetic Algorithm for Designing Cellular Manufacturing Systems with Labor and Tools Issues Absorption and Evaporation Mass Transfer Simulation of a Droplet by Finite Volume Method and SIMPLEC Algorithm Sequencing Mixed-Model Assembly Line under a JIT-Approach Numerical Investigation of Formation and Development of in-Cylinder Rotational Flow in a Spark Ignition Engine Study of close-Range Photogrammetric Method Using Ordinary Digital Camera Lateral-Directional Aerodynamics of a Canard Guided Spin Stabilized Projectile at Supersonic Velocity Numerical Study on Plasma-Based Control of Flow over a Square Cylinder A New Knowledge Representation and Processing Method of Radar Fault Diagnosis Accurate Numerical Prediction of Incompressible Fluid Flow in Lid-Driven Cavities Intelligent Parking Method for Trucks in Presence of Fixed and Moving Obstacles Randomly Adaptive Dynamic Surface Control for a Parametric Strict Feedback System with Actuator Failures PID Parameters Tuning for the Control of Nonlinear Systems Using Measure Theory Numerical Analysis of Single Phase Flow Pressure Drop in a Horizontal Rifled Tube Satellite Fault Detection and Isolation through Decoupling Parity Space Novel Approach for Nonlinear Maneuvering Target Tracking Based on Input Estimation An Investigation on the Sensitivity of Limit Cycle Oscillations for Detecting Damage in an Aeroelastic Panel An Evaluation of Model Ship Total Resistance by Measured and Different Methods Numerical Prediction of Natural Convection Heat Transfer through Porous Media by the Lattice Boltzmann Method Development a Device for Measuring Soil Mechanical Properties Numerical Investigation of Natural Convection Heat Transfer from Square Cylinder in a Vented Enclosure MEMS Vector Hydrophone Structual Error Analysis and Testing Study to Improve the Computation of the Oil Spill Measurement of Multiple Mechanical Properties of Fabrics in One Test Fossil Epitheca Measurement as a New Method: Retrieval of the Earth's Climate 310 Million Years Ago the Oldest Weather Glass Attractive Nonlinear Schroedinger Equation and Bose-Einstein Condensate in Phase Space Optimization of Optical Wavelength Conversion in SOI Waveguide Measurement of Single Event Upsets in the ALICE-TPC Front-End Electronics Study on the Rubrene Emission Sensitized by a Phosphorescent Ir Compound in the Host of CBP Biomechanical Research on Plantar Pressure Distribution in Different Landing Condition Analysis of an Engine Mounting Structure of an Aircraft with the Purpose of Accurate Adjustment A Numerical Study of the Effect of Pressure on Propulsive Droplets Sizing in a Duct by KIVA-3V Code Solution of Free Vibration Equations of Euler-Bernoulli Cracked Beams by Using Differential Transform Method Active Stabilization of a Two-Satellite Tether in Elliptic Orbits Using Coulomb Forces Pervading Cold Testing of Engines in the Automobile Zone ICA and BP Neutral Network Based Fault Detecting Algorithm for Large Engine Tilt Angle Optimization for Grid Interactive Solar Photovoltaic Array Investigation of Hand Worn Jewellery Effects on the Specific Absorption Rate in the Human Head and Hand Combustion Properties of Norwegian Biomass: Wood Chips and Forest Residues A Cost-Effective Hardware Approach for Measuring Power Consumption of Modern Multi-Core Processors Effect of Steam Injection in Gas Turbine Combustion Chamber on the Performance of a Natural Gas Fired Combined Cycle Power Generation Unit Investigation of Nonlinear Acoustic Effects in Two-Dimensional Open Cavity Flow Unsteady Compressible Flow over Heaving Bodies Using an Implicit RANS Solver Accurate Calculation of the Natural Frequencies of Reticulated and Solid Cylindrical Composite Shells Failure Analysis of Low Pressure Evaporator Tubes in a Typical Combined Cycle Power Plant Reynolds Study of the Flow Induced Noise The Tribological Study of a Quinazolin-4-Ones Derivative as Additive in Liquid Paraffin Pressure Corrections for the Potential Flow Analysis of Kelvin-Helmholtz Instability Effect of Building Height on Energy Consumption of Radiator and Floor Heating Systems Study on Shear-Mode of Piezoelectric Patch/Complete Layer in Smart Laminated Shell Panels An Aerothermodynamic Design Approach for Scramjet Combustors and Comparative Performance of Low-Efficiency Systems Efficiency Improvement of an Axial Flux Permanent Magnet Brushless DC Motor for LVAD Application Exact Elasticity Solution for the Density Functionally Gradient Beam by Using Airy Stress Function Experimental Investigation of Manifold Induced Flow Maldistribution in U-and Z-Turn Flow Configurations Analysis on Characteristics of Heavy Vehicle Electrical Cooling Fan with CFD and Motor Test Results Some Anomalies in the Experimental Results of EDM Induction Heating of an Aluminum Billet: A Numerical Study of the Thermal Behavior Large Deflection of Various Functionally Graded Beam Using Shooting Method Product Design Aspects for Design of Accurate Mass Properties Measurement System for Aerospace Vehicles Turbulence Pattern in Triangular Cylinder A Study on Variation of Microstructural Parameters in Titanium Alloys during near Superplastic Regime of Deformation Chapter 23: Computer-Aided Design, Manufacturing and Engineering Research of the Key Techniques of Monitoring On-Orbit Docking for BLRU Design of a Remote Mine Gas Concentration Detector Design and Fabrication of 3D Syskevis Metrisis Comparative Dynamic Response of a Optimized Single Link Flexible Manipulator Design and Development of Swarm Robots for Security Applications Multidisciplinary Design Optimization Approach for a Small Solid Propellant Launch Vehicle Conceptual Design Using Hybrid Simulated Annealing Design and Implementation of an Efficient Biomass Drier System for a Wood Gasification Based Power Plant Optimization of New Metal Gasket Design Based on Contact Width Involving Contact Stress Consideration Control System Development of Grating Ruling Engine Based on MATLAB/Simulink Design and Fabrication of Floor Conveyor An Implementation of Lean Technology in an in-Plant Manufacturing System, a Funiture Company Optimal Design of Supercavitating Underwater Vehicles for Mass Distribution Single Board Computer Based Building Security Management System: Contactless Smart Card for Automatic Door Access Control System A New Computerized System for Piercing and Bending Progressive Die Design Medical Image Segmentation and Reconstruction Based on Bayesian Level Set Method and Marching Cubes Algorithm A Stable Adaptive Control Method in Networked Control System Fuzzy Logic Controller Designing of an Active Roll Control System for Medium and Large Size Vehicles Extraction Method of Version Number in Engineering Drawing Planar Maximal Covering Location Problem with Inclined Ellipses Korean Products and Appeal Design JIT Quality Control System Design Based on Simultaneous Engineering Design Optimization Method about the Spring Stiffness Used in Active Engine Hood of Pedestrian Protection Design of Alarm System with Pyroelectric Infrared Sensor Increasing the Image Contrast of Atomic Force Microscope by Using Improved Rectangular Micro Cantilever A Quantitative Approach to Assessing Product Design for Remanufacturing Computed Extinction Limits and Flame Structures of Opposed-Jet Syngas Diffusion Flames Automatic Global Registration of 3D Point Clouds for Reverse Engineering and Inspection Processes Design and Construction of a High Speed Inter-Row Cultivator Enhancing the Starting Torque of Turbocharged SI Engine Using 1-D CFD Simulation Library Structure of Dynamic Simulation for Combined Heat and Power Plant in Modelica Language Performance Analysis of the Computed Torque Based Active Force Control for a Planar Parallel Manipulator An Experiment on Electric Power Steering (EPS) System of a CAR Design and Prototyping of a Linear Electromechanical Actuator Station-Keeping Control Law Design of Near-Space Airship with Wind Interferences Based on Control Allocation Strategy Design of a Wind Water Heater Novel Method on Using Evolutionary Algorithms for PD Optimal Tuning Error Recovery System Encoder/Decoder Method and VHDL Design for Saving Memory of Embedded System Compensation of Input Disturbance in EPS System Using Sliding Mode Observer Design of Neural Network for Satellite's Attitude Control Systems Application of Neural Networks and PID in on Line of Real-Time Temperature Control System A New Hybrid Design of Experiments Approach for Optimization in Structural Acoustics Machine Fault Diagnosis Using MLPs and RBF Neural Networks Design of Gas Injection Unit in an Iranian Onshore Oil Field Development Project Design and Simulation of MEMS Based Tuning Fork Micro-Gyroscope Two Output OTA Biquad Filter Solving Problems in Chaos Control though an Differential Evolution Algorithm with Region Zooming Hybrid Reconfigurable PC Add-on Card for Parallel Image Processing Statistical Mechanical Approach to Image Processing Technology Bayes-Optimal Solution to Inverse Halftoning via Super-Resolution Estimate Permeability from Nuclear Magnetic Resonance Measurements Using Improved Artificial Neural Network Based on Genetic Algorithm Improving Elmore Model of RLC Networks for Applying to SWCNT Interconnects Design of Quaternary Half Adder Using Hybrid SETMOS Cell Research on TCAM Match Algorithm in High-Speed DPI System The FPGA Implementation of Digital Correlator in PCS A HDR-Based Multiple Post Process Effects Rendering Method Computer-Aided Process Planning of Strip Layout in Progressive Dies Design of a Mechatronic Drive Train with Regenerative Braking An Adaptive Surrogate Model Applied to the Design Optimizations of Waverider-Based Hypersonic Vehicle Autogeneration of Fuzzy Logic Rule-Base Controllers Study on Human Musculoskeletal Biomechanics Based on China Digital Human Project CROPS - A Decision-Making Aid Tool for Product Redesign A Method of Optimizing the Scheduler for Improving the Performance of the OSEK OS Capacitive Micromachined Ultrasonic Transducer Based Gas Sensor Modeling and Simulation Analytical Modeling for Short Channel SOI-MOSFET and to Study its Performance Telerobot Arm (TRA) Curvilinear Bipedal Walk Learning in Nao Humanoid Robot Using a CPG Based Policy Gradient Method Postprocessor and Optimization of Rotations for Six-Axis Machining with Sequencing Technique Design Considerations for Electrostatic Energy Harvester Novel MPPT Control in Permanent Magnet Synchronous Generator System for Battery Energy Storage A New Method to Improve the Voltage Distribution and Electric Field Control for Conceder Bushing Controlling a Robot Arm by Thai Voice Commands Determining the Optimal Capacity and Place of DGs in Distribution Systems Fuzzy Enhancement of Power System Stability Using FACTS Devices Comparison of Multi Agent Based PSO Approach for Optimal Power Flows with Security Constraints Modeling and Simulation of Turbogenerator Using Computational Intelligence Optimisation Design of Six-Bar Double Dwell Mechanisms: A New Approach Trajectory Optimization for Hypersonic Vehicle Satisfying Maneuvering Penetration Trajectory Optimization of Hypersonic Vehicle Using Gauss Pseudospectral Method Comparative Evaluation of Mode Combination Methods in Seismic Analysis Using Response Spectrum Method for Tank Structure Using FEA - Seismic FEA A New Angular Acceleration Guidance Law with Estimation Approach Based on Sliding Mode Observer against High Maneuvering Target A Tool for Decision Making in K-Out-of-N System Maintenance Micro-Hydro Power Generation Design and Fabrication of Micro-Hydro Turbine for Water Treatement Plant Simulation of Solid Particles in Combined Conduction, Convection and Radiation Gas Flow over a Backward-Facing Step in a Duct Spacecraft Adaptive Sliding Mode Attitude Tracking Control Using DGCMG Thermo-Elastic Design of Flexure for Spaceborn Opto-Mechanical Payloads Study of Different Nozzle Configurations for Supersonic COIL System Selection of Grippers-A Fuzzy Graph Theoretic Approach Engine Rotational Dynamics Calculation with Stroke Identification for Scooter Engine Using FPGA Computational Analysis and Studies on Differential Ejector Identification of Aerodynamic Derivatives of a Flexible Aircraft Using Output Error Method Optimal Damage Detection Sensor Placement Using PSO Chapter 24: Semiconductor Materials Manufacturing Fuzzy Logic Based Impedance Control to Monitor on Torque under Impulsive Loading Design and Implementation of a System on FPGA for Fault Detection on Industrial Machines through Vibration Sensing Development and Implementation of an Integrated Sensor Platform Based on Graphical Monitoring and Control Semi Active Control of Chaos in Systems Excited by Non-Ideal DC Motor Characterization of Capacitively Coupled Radio-Frequency Argon Plasma by Electrical Circuit Simulation Novel Materials as Interlayer Low-K Dielectrics for CMOS Interconnect Applications PLC Based POKE-YOKE System for Output Shaft Assembly Walking Assist Device: The Electronic and Firmware Design An Architecture Analysis of ADCS for CubeSat: A Recipe for ADCS Design of ICUBE A Study on Nanocutting of Monocrystalline Silicon by Molecular Dynamics Simulation The Research of Micro-Satellite Attitude Determination Based on Predictive Filter Solar Energy Electric 4400 Va, 3x220 Volts, 50 Hertzs with Sliver Cells and Changeover Switch Based PLC Festo FC-34 The Methods of Synthesis of Multilevel Circuits of Compositional Micro Program Control Units Electrical and Magnetic Properties of (BiLi)1/2(FeV)1/2O3 The Study of Direct Tunneling Current in Strained MOS Device with Silicon Nitride Stack Gate Dielectric Analytical Threshold Voltage Models for Strained Si/Strained Si1-xGex/Relaxd Si1-yGey PMOSFET Collector Resistance of Accumulation-Subcollector Transistors for SOI SiGe BiCMOS Technology The Impact of Drain-Induced Barrier Lowering Effect on Threshold Voltage for Small-Scaled Strained Si/SiGe nMOSFET Detemining the Thickness of Barriers and Well of Resonance Tunneling Diodes by Specified I-V Characteristic The New Material Structure Design and Research of the GaAs-Based Resonant Tunneling Diodes Study of a Novel Electrostatic Detection Sensor Studies on the Preparation and Characterization of Ferroelectric PLZT Film Capacitors Synthesis of Carbon Encapsulated Nickel Nanoparticles by Laser Ablation in Liquid Electronic Transport Properties of SiC Nanotube with Antisite Defect A High Efficiency CMOS Power Amplfieir with a Diode Linearizer and Voltage Combining Transformers

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB07864290
• ISBN:
  • 9783037852620
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 7 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA88918107