Material and manufacturing technology II : selected, peer reviewed papers from the 2011 2nd International Conference on Material and Manufacturing Technology (ICMMT 2011), July 8-11, 2011, Xiamen, China
著者
書誌事項
Material and manufacturing technology II : selected, peer reviewed papers from the 2011 2nd International Conference on Material and Manufacturing Technology (ICMMT 2011), July 8-11, 2011, Xiamen, China
（Advanced materials research, v. 341-342）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
These proceedings contain the fully refereed papers which were presented at the 2nd International Conference on Materials and Manufacturing Technology (ICMMT 2011) held during July 8-10, 2011 in Xiamen, China. The main goal of the event was to provide an international scientific forum for the exchange of new ideas in a number of fields, and to facilitate in-depth discussions with peers all over the world. Core areas of materials and manufacturing technology, as well as multidisciplinary, interdisciplinary and future applications are covered; thus providing a timely guide to the entire field.
目次
Preface, Organizing Committees and Sponsors
PART 1
Chapter 1: Materials Behavior
The Decomposed Theorem of Torsional Circular Shaft with Two-Dimensional Dodecagonal Quasicrystal
Temperature Dependence of Contactless Electroreflance Spectroscopy of C-Plane ZnO Bulk
The Influence of Gas Metal Arc Welding Parameters on the Carbon Steel ss400 Grade by Using 23 Factorial Design
Effect of Gas Metal Arc Welding Parameters on Mechanical Properties for Carbon Steel ASTM A285 Grade A
Synthesis and Characterization of Bioactive Sol - Gel Glass: A Preliminary Study
Mechanical Properties and Wear Behavior of Brake Pads Produced from Palm Slag
Microstructure and Mechanical Properties of Wrought Mg-4.1Li-2.5Al-1.7Zn-1Sn Alloy
Design and Analysis of a MEMS Tunable Inductor Based on UV Lithography of SU-8
CO Adsorption on the AunS(n=1~6) Clusters: The First-Principles Study
Chapter 2: Materials Behavior
Thick Hydroxyapatite Coating on Ti-6Al-4V through Sol-Gel Method
Application of Non-Linear Partial Least-Squares Regression in the Prediction of Carbonization Depth of Concrete
Prediction of Concrete Strength Based on BP Neural Network
Preparation of CoFe2O4 Nanocrystallite by Sol-Gel Combustion Synthesis and Evaluation of its Reaction Performance
Failure on Multilayered Anisotropic Conductive Films (ACF) Packaging
Growth of InAs Quantum Wires with Ga-Assisted Deoxidation on Cleaved-Edge GaAs (110) Surface
Experimental Study on Mechanical Properties of Sole Materials of Aerobics Sports Shoes
Dimensional Stability, Mechanical Properties and Fire Resistance of MUF-Boron Treated Wood
Chapter 3: Casting and Solidification
Structure of TiOx Precipitated during Solidification of Steel
Optimization of Geometric Parameters for Turbine Blades Based on Inverse Adjustments
Chapter 4: Powder Metallurgy and Ceramic Forming
Effect of TiO2 Nano Powder on the Microstructure and Electrical Properties of TiO2 Capacitor-Varistor Ceramics
An Investigation on the Preparation of Active Carbon-Ceramic Sphere
Optimization of Processing Conditions on the Yield of Nano SiC Powder from Rice Husk
Size Distribution Analysis of Kaolin Using Laser Diffraction Technique
Comparative Experimental Study on Explosion Characteristics of Nano-Aluminum Powder and Common Aluminum Powder in the Explosive Device of a Long Pipeline
Influence of Temperature and Stress Factors on Warm Compaction Process of Molybdenum Powder Density
Chapter 5: Surface, Subsurface and Interface Phenomena
Analysis of Contact Lines on Corrected Planar Double-Enveloping Worm Wheel
Research on Ion Nitriding Temperature Effect on Wear Resistance of 35CrMo Steel
Study on Mechanism of Polishing Sapphire Crystal by Laser
Smooth GaAs (110) Surface Fabrication Using the Ga-Assisted Deoxidation Method
Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness
Investigation of Grinding Surface Temperature: Experimental Measurements and Numerical Modeling
Optimization and Implementation of the Surface Rendering Algorithm
Automatic Classification of Dayside Aurora in All-Sky Images Using a Multi-Level Texture Feature Representation
Multisensor Video Fusion Based on Surfacelet Transform
Fast Content Based Color Image Retrieval System Based on Texture Analysis of Edge Map
Chapter 6: Composite Materials
The Carbon Fiber Composite Materials Application in Sports Equipment
Numerical Simulation on Thixocasting Process of Auto Box-Like
Light-Weighting Design of Eco-Power Automobile Chassis Made from Green Composite and its Topology Optimization in FEA
Correlation between Na2SiO3/NaOH Ratio and Fly Ash/Alkaline Activator Ratio to the Strength of Geopolymer
A New Environment Friendly Process for Making Green Epoxy-Based Composites Mold
Properties of Multi-Walled Carbon Nanotube / Polymethyl Methacrylite Nanocomposite Prepared via a Modified Coagulation Method
Microstructure and Mechanical Properties of SICP/MoSi2 Composites Manufactured by In Situ Reaction and Hot Pressing
Shields Characterization of Composite Materials Based on Pyrites Ashes
Optimized Preparation of Fe2O3/Al2O3 Composite with Sol-Gel Combustion Synthesis Method Based on Orthogonal Experimental Design
Chapter 7: Materials Forming
Research on Microbial Degradation of Corn Stalk
New Materials for Auto-Body Lightweight Applications
Study of Properties of High Strength Concrete Reinforced with Industrial Waste Steel Fibers
Applying Elastic Unfolding Technique in Nonlinear Inverse Finite Element Method for Sheet Forming Modeling
Preparation of Polymer Microspheres Using Silane Coupling Agent Modified Nano-SiO2 as Single Stabilizer
The Channel Bending Forming Process of Ti-6Al-4V Blank Based on Finite Element Method
Techanics Experiment Study on PcBN Cutting Tool Dry Turning Austenitic Stainless Steel AISI 304
The Research and Application of Clothing Dynamic Mannequin
Chapter 8: Machining
Investigation of Precision Forging Process of Spur Gears: Numerical Analysis and Experiments
Nonlinear Analysis Based on Experiments of the Rotation Shaft System of Mine Drainage Motor and Pump
Experimental and Theoretical Analysis of Carbon Fiber Filament Wound Tubes with Symmetric Winding Angle under Tensional Loading
Study on Winding Pattern and Undulation Degree of Filament-Wound Composite Tube
Research on Mechanical Wrench Tool Innovative Design Method
Analysis and Optimization of Thermal Characteristics for NC Lathe Spindle System
Research on Piston Pin's Strength Calculation Based on FEA
Design of Double T-Shape Accelerometer Based on MEMS
Real-Time Tool Wear Monitoring Based on Feed Motor Current in Chuck-Center Mounting Condition
Analysis of Finite Volume of Forging Process of Connecting Rod
Cutter Path Optimization during High-Speed Machining of Numerical Control
Chapter 9: Nanomaterials and Nanomanufacturing
An Asymmetric Fuzzy Method for MPPT Control of PV System
Studying the Bubble Characteristics of Gas - Particle Flow in a CFB through Image Analysis
Chapter 10: Biomedical Manufacturing
Study of Non-Viral Gene Transfer of NB4 Cells
Research of Immobilization of Transglutaminase on Polypropylene Microporous Membranes
Study on Dynamic Bifurcation of the Hindmarsh-Rose Neuron under Parameters' Changing
Study on Dynamic Characteristics of the Hippocampal Neuron under Current Stimulation
Research and Application on Bionic Pattern Recognition
Chapter 11: Environmentally Sustainable Manufacturing Processes and Systems
Research on Power System Cost Model with Wind Power Based on Simulated Annealing and Genetic Algorithm
Chapter 12: Manufacturing Process Planning and Scheduling
Reconfigurable Manufacturing Resource Modeling Technology
The Research of United Scheduling and Coordination in Three-Layer Supply Chain Model
A Discussion on New Manufacturing Method Based on Synergetics Theory
The Development and Implementation of a New Type Insulation Testing Equipment
Chapter 13: Meso/Micro Manufacturing Equipment and Processes
The Application Effectiveness Evaluation of the Educational Equipment Based on AHP
Research and Design of Digital Gyroscope Based on MEMS
PART 2
Chapter 14: Modeling, Analysis and Simulation of Manufacturing Processes
Optimization of Injection Molding Process Parameters to Increase the Tensile Strength in Polyamide-Specimen Using the Taguchi Method
Investigation of Liquid Nitrogen (LN2) as Coolant in Grinding of AISI D3 Steel
Technical Development on Large Size Silicone Rubber Mold
PCB Related Failures in Electronic Assemblies
Limit Load Finite Element Analysis of Thick-Walled Cylinders with Surface Cracks under Combined Internal Pressure and Axial Tension
The Hoist of Mine Improvement and Design of Brake System Study
A New Calibration Method for FLCs in the M-K Frame-Work
Failure Mechanism of Tungsten Heavy Alloy for Mould
Numerical Analysis on the Key Technology in Extrusion Tapping of Internal Thread
Based on a Crawler Type Walking Mechanism Analysis and Research
Modeling of LSF Technology in Building Design and Construction Case-Study: Parand Residential Complex, Iran
Feedback Servo Pump Station Overflow Innovative Energy-Saving Design
Chapter 15: Modeling, Analysis and Simulation of Manufacturing Processes
Comparative Analysis of Selective Clonal Mutation with Conventional GA Operators in Solar Tracking Environment
Discovering Homogenous Service Framework Based on Matching Mechanism and Clustering
Comparative Study on Filter Methods of Medical Ultrasound Images
A Trusted Process Security Model for the Access to Power Enterprise Data Center
Minimizing the Embedding Impact Using Network Flow Algorithms
Aircraft Rotating Blades Radar Echo Model and JEM Feature Extraction
Evaluation of Grid Performance Based on Grey AHP Model
The ERM-Based Self-Adaptive Agent Model
A Cloud Model to Implement SaaS
A Heart Sound Acquisition and Analysis System
Exact Outage Probability Analysis for Selection Decode-and-Forward Cooperation Systems
Analog Codes for Gross Error Correction in Signal Transmission
Chapter 16: Modeling, Analysis and Simulation of Manufacturing Processes
Research and Design of the Security Area Classification Model of Electric Power Information System
Simulation and Performance Analysis of OFDM System Based on Simulink
An Efficient Algorithm for Sequential Pattern Mining with Time Constraints
Face Detection Based on Color Model and Grayscale Value Distribution
Feature Detection by Color Tensor-Based Photometric Invariants
Accuracy Improvement of Graph-Cut Image Segmentation by Using Watershed
A Kind of Improved GQM Measurement Model for Software Process
A Novel Physically-Based Method for Curve Deformation
Image Retrieval Based on Shape Feature and Color Feature
Offline OCR System for Machine-Printed Turkish Using Template Matching
A Novel Time Synchronization Method for Multiple Moving Platforms Cooperation Tracking System
Study on R & D of Embedded Front-End Intelligent Monitoring System Based on Machine Vision Algorithm
Chapter 17: Computer-Aided Design, Manufacturing and Engineering
Simulation and Analysis of Fuel Injector Needle Closing Time
Computer-Supported Innovation for Modularized Product Design
Study on Equipment Failure Diagnosis Based on Expert System
Agent Based Infrastructure with RFID Technology for Autonomous Shop Floor Control System
Design of Fuzzy PID Compound Control for Ultrasonic Motor Based on DDS Technology
A Remote Assessment Information Collection System Based on Fuzzy Logic Inference
Remote Image Acquisition and Transmission Framework for Monitoring Plant Growth Based on ARM9
Performance of Multisource Application Layer Multicast Routing: A Cost-Based Approach
The Design of a 5 GHz Programmable Frequency Divider for Fractional-N Frequency Synthesizer
NonConvex Iteratively Reweighted Least Square Optimization in Compressive Sensing
A Kernel Canonical Correlation Analysis Based Idle-State Detection Method for SSVEP-Based Brain-Computer Interfaces
Chapter 18: Computer-Aided Design, Manufacturing and Engineering
Discussion on Power Grid Magnetic Storm Disaster Monitoring System Based on Cloud Computing
Cardiovascular Multi-Parameter Monitoring System during Surgery
Study on Health Management System Design
Hospital Information System Performance Optimization
Strategic Capability System's Building and Evaluation of Power Grid Enterprises
An Automatic Method for Vertebra Segmentation
Application of Monitoring Technology Based on Aeolian Vibration in Smart Grid
The Design of High Precision Pyroelectric Infrared Processing Circuit
The Application of LVDS Interface in the Distance High-Speed Data Transmission
The Study of Artificial Endocrine Network Model and its Application in Robot Navigation Control
Network Resources Planning System for Manufacturing Cluster Based on Service-Oriented Architecture and Bill of Hierarchies
Chapter 19: Computer-Aided Design, Manufacturing and Engineering
Distributed Computing for Mechanical Virtual Human
A New Write Caching Algorithm for Solid State Disks
Design and Implementation of SNMP-Based Web Network Management System
Remote Sensing Image Segmentation Based on and Cloud Model and Parallel Mechanism
A Novel Approach for Color Tongue Image Fast Segmentation Based on Level Sets
A Watermark Preprocessing Algorithm Based on Arnold Transformation and Logistic Chaotic Map
Optimized Watermarking Technique Using Mex Implementation
Design and Implementation of Character CAPTCHA Based on Contraction Mapping
Fast Background Subtraction Based on GPU
An Image Forensics Algorithm for Blur Detection Based on Properties of Sharp Edge Points
Model Based Targets Matching from Image Frames
Chapter 20: Computer-Aided Design, Manufacturing and Engineering
Efficient Image Matching Algorithm Using Distance Transform and Particle Swarm Optimization
Multiple Watermarks Embedding Simultaneously to Identify Image Status Based on Fractional Fourier Transform
Improved Algorithm for Sub-Pixel Edge Detection Based on Zernike Moments
Fast and Accurate Video Retrieval of a DVR Special-Purpose File System
Image Segmentation Approaches of Based on Fractals
Determination of the Box-Counting Fractal Dimension of Pore Distribution in Eggshell Based on Scanning Electron Microscopy Image Analysis
Application of CMAC-PID Compound Control in PMLSM Servo System
A Novel and Fast Method for Content-Based Image Retrieval via Stack-Triangles Geometrics Histogram
Object Tracking Using Probabilistic Principal Component Analysis Based on Particle Filtering Framework
Fast Feature-Based Template Matching, Based on Efficient Keypoint Extraction
Chapter 21: Semiconductor Materials Manufacturing
The Design of Data Acquisition Storage and Real-Time Monitoring System Based on FPGA
A Real-Time Flash Memory Storage System in Embedded Environment
Development of a Pattern Recognition System Based on Image Processing Implemented on a Safety Critical Embedded System for Accident Prevention
Chapter 22: Laser Based Manufacturing
Optimal Scanning Condition of Selective Laser Melting Processing with Stainless Steel 316L Powder
Chapter 23: Precision Molding Processes
Power Factor Correction in Harmonic Environment
Research on the Automatic Ammeter Reading System and Its Application on the Intelligent Ecological Community Project
Chapter 24: Rapid Manufacturing Technologies
Studies on Automatic Recognition System of Fabric Weaves' Parameters
Chapter 25: Metrology and Measurement
Research on Deflection Calculation of Laminated Glass Simply Supported on Four Sides
Research on Demodulation System for Fiber Bragg Grating Sensor Based on Tunable Laser Light
Quasi-Static Energy Absorption of Pultruded Composite Tubes E-Glass/Polyester under Oblique Loading with Different Cross-Section
Design and Experimental Study a Logging Instrument with Dual Channel and Two-Way Hydraulic Control Valve
Dynamic Study of Unseating Prevention Devices under Earthquake
Recycling Process for the Management of E-Waste from Colour Picture Tubes of TV in Manufacturing Building Materials
Design of Equivalent Device Based on Ethernet Communication
Optimal Design of a Cantilever-Based Sensor for Measuring Micro-Forces
3D Animation Applications in Highway Design
Transformation of the Glyph Curve in Map Publishing
Gear Chamfering Profile Measurement System Based on Laser Sensor and Machine Vision
A Modified Multi Scale Retinex with Color Restoration Algorithm for Automatic Enhancement of Landsat-5 Remote Sensing Image
The Binocular Measuring System Research Based on OpenCV
「Nielsen BookData」 より
