Progress in power and electrical engineering : selected, peer reviewed papers from the 2011 International Conference on Energy, Environment and Sustainable Development (ICEESD 2011), October 21-23, 2011, Shanghai, China
Author(s)
Bibliographic Information
Progress in power and electrical engineering : selected, peer reviewed papers from the 2011 International Conference on Energy, Environment and Sustainable Development (ICEESD 2011), October 21-23, 2011, Shanghai, China
（Advanced materials research, v. 354-355）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
Tokyo Institute of Technology Ookayama Library
Part 1A25118/354400045127,
Part 2A25118/354400045135 -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
The extensively peer-reviewed contents of this book cover the topics of engineering thermophysics, thermal engineering, power machinery and engineering, fluid machinery and engineering, HVAC, air-conditioning and refrigeration, power systems and automation, high-voltage and insulation technology, electrical theory and new technology, power electronics and power drives. The work is an invaluable guide to these subjects
Table of Contents
Preface and Organizing Committees
Chapter 1: Engineering Thermophysics
Mass Transfer Mechanisms of Weak Base Complex System in Porous Media
The Influence of Solid Wall-Fluid Molecular Interaction on Transport Properties of Gases in a Mini/micro Channel
Wall Shape on the Influence of the Spray Wall-Impingement under Common Rail System
Influence of Coil Inclined around Y Axis on Thermomagnetic Convection of Air in a Porous Cubic Enclosure under Zerogravity
Effect of Substrate Conditions on Residual Stresses of Plasma-Spraying YSZ / Sm2Zr2O7 Thermal Barrier Coatings
Adsorption Equilibrium and Kinetics of Copper from Aqueous Solutions on Steel Slag
Surface Tension and Bubbles
The Effects of Low Flow Rate Gas Involvement on Oil-Water Flow in Horizontal Pipes
Analytical Solution of Slip Flow of Nanofluids over a Permeable Wedge in the Presence of Magnetic field
The Governance Mechanism of Recycling of Waste Electrical and Electronic Equipments
Effect of Top-Layer Thickness on Thermal-Shocking Property of Plasma-Spraying Sm2Zr2O7/YSZ Thermal Barrier Coatings
Numerical Simulation on Catalytic Combustion of Hydrogen inside Micro Tube
Study on Deproteinization and Decoloration in Fucoidan
Exergy Analysis and Optimized Power Generation Applied to the Co-Combustion of Sewage Sludge and Coal
Study on Collision Avoidance of Head-on Situation in Restricted Visibility
Comparing and Analyzing Influence of Basalt and Carbon Fibers on the Cement Mortar
Axial MHD Flow of a Generalized Oldroyd-B Fluid Due to Two Oscillating Cylinders
Experimental Study on Start-up Characteristics of Pulsating Heat Pipe
Water Source Determination of Mine Inflow Based on Non-Linear Method and Hydrochemical Characteristics
Influence Analyzing of Slope Stability with Setting of Crushing Station in Semi-Continuous Technology
Big Diameter and Long Drilling-Holes Technology and its Application in Drainage Gas in Dingji Coal Mine
Field Test Research of Pile-Plank Structure on Zhengzhou-Xi'an High-Speed Rail
Study on Catalytic Combustion Characteristics of Hydrogen inside Micro Scaled Tube
Sine Function and Power Function Model with Photovoltaic Generation System in Simple Installation
Analysis of Urea Solution and Experimental Study for Adaptability of SCR Converter in Vehicular Diesel Engines
Study on Centers of Gravity for Energy Production, Consumption and CO2 Emission in China
The Studies on the Esterification of Oleic Acid Using P2O5/CaCl2/Fe3O4 Composite Catalysts
Experimental Study on Internal Flow Field of Wet Desulphurization Tower
Investigation about Thermal Shock Property of Plasma-Spraying Sm2Zr2O7 Thermal Barrier Coatings with Different Substrate Condictions
The Fault Line Selection Method of Small Current Grounding System Based on Wavelet Transformation
Experimental Research on Resistance and Heat Transfer Properties of Corrugated Plate Air-Cooled Heat Exchanger
Evaluating on Effect of HVAC Series with Impulse Excitation Voltage on Porcelain Insulator by Using Rotating Wheel Dip Test
Weakly Compressible Fluid Model to Study Thermal Effects on Laser Propagating in Closed Tube
Investigation on the Combustion Properties of Refuse Derived Fuel in an Internally Circulating Fluidized Bed
Influence of Coil Inclined around X Axis on Thermomagnetic Convection of Air in a Porous Cubic Enclosure under Zerogravity
Couette Flow of a Generalized Oldroyd-B Fluid due to Constantly Accelerated Shear Stress Coupled with the Pressure Gradient
Experimental Research on the Performance of the Entrainment Jet Clean-up System Based on PIV Technology
Numerical Study of Joint Magnetisztion and Gravitational Convection of Air in a Square Enclosure under Quadrupole Magnetic Field
Applicability of Ground Source Heat Pump in Cold Areas
The Optimal Selection Investigation on Flame Holder for Afterburner
The Research on Ammonia Nitrogen Transport in Different Kinds of Soil
Nanofiber Sheets with the Superabsorbent Properties
Predicting Ash Fusibility of Coal from Coal Properties
Preparation and Characterization of Solid Biomass Fuel from Waste Mushroom Cultivation Bags
Precision Cultivation of Phaeodactylum tricornutum and Free Lipid Acid Analysis
The Influence of Thickness of Nitrocellulose Wood Lacquer on Formaldehyde Emission Rates
Deposition of Chloride in Two-Phase Flow for the Superheater via Numerical Simulation
Experiment and Thermodynamic Analysis on Mineral Formation of Cement Clinker Cogeneration from Coal in Pulverized Coal Combustion Boiler
Measure of the Optical Properties of Semiconductor Pb3O4 Nano-Crystalline of Using Photo-Acoustic Technology
The Simulation Study of Air Cooler in an Integrated Coal Gasification Combined Cycle System
Application Life Cycle Assessment to Diammonium Phosphate Production
Chapter 2: Thermal Engineering
Technical and Economic Evaluation on Overall Condition of Circular-Cooler Waste Heat Power Station
Progress of Closed-Cycle OTEC and Study of a New Cycle of OTEC
Interaction of CO with CuO and CuO/graphene: Reactions Mechanism and the Formation of CO2
An Unsteady Model for Natural Ventilation with Solar Chimney
The Application of Mathematical Model and Numerical Simulation in the Pneumatic Drying of the Straw
Experimental Investigation of the Influence of the Gas Type on the Heat Transfer in a High-Vacuum-Multilayer-Insulation Cryogenic Tank After Sudden, Catastrophic Loss of Insulating Vacuum
Thermodynamic Analysis of Magnesium Produced by CaC2 under Ordinary Pressure
Exergo-Economic Performance Evaluation of Enhanced Tube under Equivalent Pump Power Consumption
Influence of Preheated Air Temperature on High Temperature Air Combustion in Furnace with Swirling Burner: a Modeling Study
Study on Mathematical Simulation of Nitrogen Oxides (NOx) Formation of Coal-Fired Boiler
Comparative Analysis of Electric Power and Steam Loss Rate between Single Flash and Binary Geothermal Power System with Single Screw Expander
The Relationship between the Wall Temperature and the Boiling Rate of the Biomass Boiler Economizer and Calculation Program Design
Application and Analysis of Wavelet Transform and Edge Detection in Critical Heat Flux of Natural Circulation
Experimental Investigation on Flow Patterns of Cylindrical-Conical Spout-Fluidizing Bed
Research Based on the Mid-Point Enthalpy of Supercritical Unit Feed-Water Control Circuit
Study on Reasons of Frequent Outfire in a Boiler with Horizontal Concentrated Burners
Numerical Simulation of the Heat Transfer Performance in Heat Exchanger Inserted by Disturbance Device
Numerical Investigation of the Effect of Waste Heat Extracting Location on Temperature Distribution
Catalysis Reduction of NO and HCN/NH3 during Reburning: a Short Review
Combustion and Heat Transfer in 300MW Oxy-Fired CFBB
The Design of Coarse and Fine Regulatory Arc Suppression Coil
Investigation on the Combustion Rate of Carbon Particle in Pressurized Oxygen-Enriched Conditions
The Characteristics Evaluation of Swirl Burner Based on the Numerical Simulation
Experimental Investigation and Comparison on Fin Surfaces Performance of Flat Tube Heat Exchangers
Study on Performance of High Low Temperature Radiator Group by a Combination Method
A Novel Method for Analyzing the Thermodynamic System of Thermal Power Plant with Double Reheat Cycles
Optimizing Design of Direct Air-Cooled Condenser
Experimental Study on Microstructure of Fly-Ash from Circulating Fluidized Bed Boilers
Chapter 3: Power Machinery and Engineering
Combustion System Optimization of a Gasoline Direct Injection Engine
Research on Zero Release Closed Cycle Diesel Engine System
A SOA-Based Power Quality Management Platform
Dynamics Simulation of the Crank and Connecting Rod Mechanism of Diesel Engine
The Design of HCNG Engine Fuel System with Making Hydrogen by Sliding Electric Arc
Research on Stress Field of the Steam Turbine Rotor Based on SVM and the Finite Element Analysis
Model Analysis of Car's Body-in-White Based on FEA
Fault Diagnosis for Wind Turbines Based on Vibration Signal Analysis
Research on Combustion Characteristics and Emissions of Methanol-Diesel Fuel with Different Additives
Experimental Investigation on Atomization Characteristics of a Certain Type of Aero Engine Fuel Nozzle
Modeling and Simulation of Marine Diesel Propulsion System in Ship Maneuvering Condition
Preparation and Properties of Sm2Zr2O7 Ceramics for Thermal Barrier Coatings by APS
Numerical Analysis of Stress Field in Heavy-Duty Gas Turbine Inlet Elbow System
Experimental Study on Atomization Characteristic of Fuel Injector of Heavy-Duty Gas Turbine
Study on the Methanol Percentages Effect on Combustion and Emission of DME/Diesel Blended Fuel
Modeling Spray Formed by Spring Nozzle Using Volume-of-Fluid Method
Simulation of Low NOx Combustion with Heating Fuel in Diesel Engine
Research on the Combustion and Emission Characteristics of Lean Burn CNG Engine
Simulation of Urea-SCR Catalytic Converter for Diesel Engine
Research on Emulsified Fuel Applied to Engine YC6J190
Research on Effect of Nozzle Structure Parameters on Performance of Common Rail Diesel Engine
A Novel Ultrasonic Motor Using Longitudinal Vibration of Bar with Varying Section
3D Finite Element Analysis of High-Pressure Common Rail Diesel Engine Connecting Rod
Study on Theoretical Design and Simulation of a Tuned Frequency Muffler
Numerical Study on the Quasi-Dimensional Model of Diesel Engine for Performance Optimization
Cutting Stiffness Analysis of a Gearbox's Back Case Based on FEA
Experimental Research on the Performance of High-Speed Diesel Engine Fuelled with Emulsified Fuel Blend of HFO & Light Diesel
Chapter 4: Fluid Machinery and Engineering
Numerical Simulation of Turbulent Mixing for Dislocated Blades in a Stirred Tank
Study on the Flow Field of Jet Plug-in Hot Blast Furnace
Research of Simulation Model for Non-Linear Turbine Regulating System
Liquid Film Features Analysis on Mechanical Seals with Micro-Pore Face by CFD
Deposition Process of Droplets Impacting on a Horizontal Surface
Modeling and Stability Analysis of the Speed Regulating System of a Planetary Mixer
Numerical Simulation of Gasoline Blending in a Cylindrical Tank Agitated by Side-Entering Agitators
Lattice BGK Study on Flow Pattern in Two-Dimensional Wall-Driven Semi-Circular Cavity
3D Geometry Modeling for the Entire Flow Passage of Francis Turbine with Long and Short Blades Based on Pro/E
CFD Study of the Mixing of Pseudoplastic Fluids with Yield Stress in a Two-Staged Stirred Tank
Time Evolutions of Water Drops Impacting on a Rotating Disk
Analysis on Effects of the Blade Wrap Angle and Outlet Angle on the Performance of the Low-Specific Speed Centrifugal Pump
A Study on the Mechanism of Bottom Hole Hydraulic Pulse Increasing Drilling Rate
Disscusion of Underwater Aeration Machine
Hydraulic Elastic Vibration Analysis of Hydraulic Turbine Blade
Improving the Efficiency of a Hydro-Turbine System by Vortex Generators
Study on the Filtering Key Technology of Acrylic Solution Based on Polyflow
Numerical Study on Throat Tube Inlet Function of Pulsed Liquid Jet Pump
Computational Fluid-Structure Dynamics Coupling Research of Flexible Wing
Numerical Simulation and Experimental Study on Deep-Well Centrifugal Pump with Small Rear Shroud Diameter
Numerical Simulation on the Pressure Field of Gas Knives
Design and Test for High Specific Speed Mixed Flow Pump with Volute
Aerodynamic Mechanism Research of Flapping Flight
Research on Cushion of Boom Cylinder in Hydraulic Excavator
Research on Flow and Heat Transfer Characteristics In Micro Heat Exchanger
Numerical and Experimental Studies on the Supersonic Coaxial Jet Mixing
A CFD Study of an up- and a down-Pumping PBT Impeller in Solid-Liquid Stirred Tank
Chapter 5: HVAC, Air Conditioning and Refrigeration
The Effects of Biological Agents on Survival, Biomass and Foliar Nutrient Concentrations of Mongolian Pine (Pinus sylvestris var. mongolica) Seedlings Planted on Keerqin Sandy Lands, China
Research on the Absorption Characteristics of Activated Carbon Prepared by Biomass
The Measured Analysis of Residential Kitchen Pressure Changed Exhaust Pipe System Characteristics
Evaluation of Thermal Comfort in an Air Conditioning Room Using a CFD Model
Dynamic Exergetic Cost Analysis of a Space Heating System
Kitchen and Toilet of the Residence Exhaust Flow Field Analysis
Heat Transfer Enhancement and Pressure Drop for R417A Flow Boiling in Internally Grooved Tubes
The Energy Conservation Research of the Environment Chamber Based on the Total Heat Exchanger
Optimal Piping Design for Enhanced Energy Saving in District Cooling System - A Case Study
Experimental Study on Condensation of R134a inside Horizontal Inner-Micro-Fin Tubes
Recent Status and Development in Researches on Ground-Coupled Heat Pump System
Ground-Source Heat Pump Performance Analysis Based on Building-Integrated Renewable Energy Demonstration Projects
Optimization of a Solar-Driven Absorption Refrigerator Operating between Four Temperature Levels
Conduction Characteristics of Frosting Circumferential Fin of Rectangular Profile
An Analysis and Evaluation on Adaptability of Wall-Hung Mounted Gas Boiler between Indemnificatory Residential Buildings in Beijing
An Online LS-SVM Prediction Model of Building Space Cooling Load
Thermoeconomic Optimization of a Seawater Source Heat Pump System for Residential Buildings
Simulation of Solar Assisted Ground Source Heat Pump System in Different Regions
A Comparative Application of MKP Method to Identify Hydraulic Condition of Complex Heating Network with Multi-Heat Sources and Multi-Loops
The Performance Improvements of a Ground-Coupled Heat Pump System for both Building Heating and Cooling Modes
Study on Expander-Auxiliary Compressor Unit Used in Refrigeration System
Design and Performance Study of a Novel Refrigeration System
Solar Assisted Heat Pump System for Floor Heating
Chapter 6: Power System and Automation
Calculation for Thermal Parameters of Steam in the Flow Passages of 1000MW Turbine under Variable Operating Conditions
Analysis of the Matching Performance of Supercharged Boiler and Turbocharged Set
Regression Test of Stainless Steel Stamping Well-Pump Based on Numerical Simulation
The Optimal Operation of Thermal Power Plant Auxiliaries Based on Mixed Integer Programming
The Power Quality Analysis and its Enhancement Scheme in Power Distribution of an Automobile Factory
Study of Electric Power System Neutral Point Grounding Using PSCAD/EMTDC
Proposal and Preliminary Study on Installed Capacity Margin
Exponential Stability Analysis for Neutral Stochastic Delayed Neural Networks
Research on a Current Direct Control Method
The Influence of Changes of Soil Parameters for Potential Distribution along the Earth's Surface under 3d Combined-Layer Soil Model
Research on Model and Algorithm of Islanding Based on CSP Considering DG
A Data Placement Strategy for Data-Intensive Cloud Storage
Study on Switching Operation in the Simulation and Training System in the Intelligent Substation
Research on the Speed Control of Automatic Train Operation System Based on the Novel PSO-B-BP-PID Controller
Classification for Short Duration Disturbances Based on Row-by-Row Similarity of Generalized S-Transform Modulus Matrix
The Simulation Platform of 10kV Distribution Network Based on PSCAD/EMTDC
Meteorological Factors Considered Load Decoupling Forecasting Techniques
The Development of Software of Self-Healing Analysis Base on the Analysis of Power Supply Path in Regional Power Network
Study on the Supporting System for Smart Grid Control Center
Research on Communication Method for the Coal Mine Drainage Control System
Root-Cause Analysis Based on Time Delay Estimation for Alarm Systems in Power Grids
The Application of Fuzzy Control in Automatic Electronic Oven
Studies on the Estimation of Transformer Winding Parameters
Study of the Operational Characteristics of Isolated Grid Fed with Hydro Generators, Diesel Generators and Photovoltaic Power Station
Analysis of Performance of Several Types of Classical Controller in Automatic Generation Control for an Interconnected Power System
Based on the BP Neural Network-PID Series Control Boiler Main-Steam Temperature System Research
A Mixed H2/H Based LMI Algorithm for Damping Inter-Area Oscillations
Research on High Order Resonance Hybrid APF
Research of Lithium-Ion Battery Sorting Method Based on Fuzzy C-Means Algorithm
Research on Voltage Stability in Grid-Connected Large Wind Farms
Blocking Analysis of HVDC Caused by DC Voltage Divider with OPDL System
A Design of Li-Ion Battery Formation System Based on ARM Embedded Computer
Improved Bacterial Colony Chemotaxis Algorithm for Distribution Network Planning
Research on the Generation Expansion Planning in Carbon Market in China
The Application of the Complex Modulation Zoom-FFT Based on Complex Analytical Bandpass Filter in Interhamonic Detection of Power System
Simulating Research on a New Current Controlling Method
Transformer Fault Diagnosis Based on Gene Expression Programming Classifier
The Service Restoration in the Distribution System with Distributed Generators Based on the Heuristic Multi-Agent Evolutionary Algorithm
CMA the Key Equipment for Condition Monitoring in Power Transmission and Transformation System
The Setting Method of Matching Coefficient for PSS2B Model of IEEE
Research on Models and Compensation Mechanism of Energy-Saving Generation Dispatching
Spinning Reserve Optimization Model Based on Bi-Level Programming
Measurement Based on the "Group Linear Regression Method" of Harmonic Impedance
Improvement and Application of Genetic Algorithms in Reactive Power Optimization of Power Network
Forecasting Method of Branch Power of the Urban Power Grid Based on Multi-Model Technology
Comprehensive Evaluation of Power Transmission and Transformation Project Based on Improved Radar Chart
The Research on Power System Design and Calculation Visualization in Mine
Research on Protection for Distributed Generation Access to Distribution Network
Risk Assessment of Power System Cascading Failure Considering Hidden Failures and Violation of Temperature
Fault Location in Distribution Systems Considering the Non-Liner Profile Characteristic of Voltage Sag on the Bus
Application of Intellectual Shuttle in AS/RS System
Optimal Capacitor Allocation Based on Fuzzy Inference and Fuzzy Multi-Objective Programming in Distribution Network
Research on the Properties of Copper-Clad Steel in Substation Grounding Project
A Data Transform Model for Intelligent Substation and Production Management System Device Online Monitoring
Cross-Regional Power Grid and its Interconnected Benefit Analysis
Extension Control and its Application in Power System
A Comparison of Short-Circuit Current Decaying Calculation between PSS/E BKDY and Computational Curve
The Research of Wind-Light Complementary Based on Pumped Storage Power System
The FrameWork of Voltage Stability in Multi-Infeed AC/DC Power System
Design of CAN Node in Li-Ion Battery Formation and Test System Based on DSP
Method of Safety Assessment about the Electric Power Supply Company Based on Cloud Gravity Center Theory
Research on the Formation and Preventive Measure of Scale in the Cooling System of HVDC Converter Valve
Study on Operation and Control on the Hulunbuir Island Grid
Study of Rough Set-Based Taste Signals Identification
Research of Battery Fault-Simulation on Primary Electrical Power System
Study on Simulation and Training System in Intelligent Substation
Chapter 7: High Voltage and Insulation Technology
Optimization and Application of Bearing Support for Output Shaft of C-EPS
The Research on the Method of Feature Selection in Support Vector Machine Based Entropy
Applications of Electromagnetic Methods in Selecting Ground Sites for Ultra High Voltage Power Plant
Experimental Study on the Breakdown of Gaps in Fire
Study on the Insulation Coordination of +/-800kV Converter Station in the Nuozhadu to Guangdong HVDC Power Transmission Project
Measure Characteristic of UHV Power Frequency Voltage Ratio Standard
The Analysis of the Opto-Couplers Relay Malfunctions in HVDC Control and Protection and the Improvements of the Trip Circuits
Sources and Treatment of the Particulate Pollutant in the Transformer Oil
Laser-Triggered Surface Flashover Characteristics of Al2O3 in Pulsed Voltage
Identifying Power Equipment Partial Discharge Signals via Pulse Appearance Frequency, Duration, and Pulse Polarity
Measurements and Classifications of PD Pulse on HDPE Specimens during Degradation
Chapter 8: Electrician Theory and New Technology
Numerical Simulation on Temperature Field of CFST Member under Solar Radiation
Heat Transfer in Narrow Rectangular Channels with Rib Turbulators
Study on Direct Torque Control Applied in the Electrical Propulsion Ship
Research and Discussion on Data Processing of the Temperature Rise Test for the Motor Winding
Parameter Calculation of Brushless Doubly-Fed Machine Based on the Genetic Algorithm
Theoretical and Experimental Results of DC and AC Magnetic Flux Transformation Using HTS Superconducting Closed Loop
Reliability Prediction of Products Based on Generalized Closeness Degree
Research on Standard Device for Power Frequency Lines Parameters Tester Based on the Technology of Virtual Complex Impedance
Fuzzy Multiple Reference Models Adaptive Control of Induction Motors
Two-Dimension Fault Line Selection Method Based on Transient Signal Features of Fault Phase
Applied Research of Grey - Fuzzy Algorithm in the Fire Detection
Chapter 9: Power Electronics and Power Drives
The Particular Phenomenon of Pulsating Heat Pipe during its Operation Process
The Effects of Variable Specific Heats of Working Fluid on the Performance of Irreversible Reciprocating Brayton Cycle
Investigation on a Novel Four-Quadrant Power Electronic Transformer
The Design and Simulation of APFC Circuit in High Power Factor Switching Power Supply
Measurement of Harmonic Impedances of Supply Systems Using Natural Disturbances
Co-Biodegradation of Multiple Monocyclic Phenolic Compounds by a Novel 2,3-Xylenol-Degrading Pseudomonas Isolate
An Adaptive Hysteresis Band Controller for Single Phase PV Inverters
A Grid-Connected Control Strategy of NPC Three-Level Inverter for Direct-Driven Type Wind Power Generator
Research on High-Power Power Factor Corrector of Power Electronic Transformer
Analysis on Performances of Matrix Rectifier under Abnormal Conditions
A Study of Topology Based on Matrix Rectifier and AC Chopper Principle
Single Stage Push-Pull Forward Inverter of PV Power Source
The Research of Current Ripple on Interleaving Parallel High-Frequency Rectifier
Research on Minimum Switching Losses of Three-Level PWM Rectifier
Wind Power System Based on Multilevel Matrix Converter
Design of Main Parameters for the Main Circuit of Soft-Witching Inverter
Modeling and Simulation of Single Phase Inverter with Dynamic Phasors
Microbial Screening Strategies for Biodegradation of Monocyclic Phenolic Compounds
Nonlinear Lyapunov-Based Stable Control Method of the Single-Phase Shunt Active Power Filter
High Power Inverter Circuit from GTO to IGCT and its Application on AC Driving Locomotive
Research of Isolated Three-Level AC-AC Converter
The Application of Improved HHT to Harmonic Analysis and Fault Detection of Power System
by "Nielsen BookData"
