Manufacturing science and technology : selected, peer reviewed papers from the 2011 International Conference on Manufacturing Science and Technology (ICMST2011), September 16-18, 2011, Singapore

Author(s)

• International Conference on Manufacturing Science and Technology
• Fan, Wu

Bibliographic Information

Manufacturing science and technology : selected, peer reviewed papers from the 2011 International Conference on Manufacturing Science and Technology (ICMST2011), September 16-18, 2011, Singapore

edited by Wu Fan

（Advanced materials research, v. 383-390）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4
• Part 5
• Part 6
• Part 7
• Part 8

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). The objective of ICMST 2011 was to provide a platform where researchers, engineers, academics and industrial professionals from all over the world could present their research results and discuss developments in Manufacturing Science and Technology. This conference provided opportunities for delegates to exchange new ideas and applications face-to-face, to establish business or research contacts and to find global partners for future collaboration.

Table of Contents

Preface and Organizing Committee Chapter 1: Computer-Aided Manufacturing Automatic On-Line Detection and Sorting System Design and Implementation for Paper-Making Printing Design and Realization of Monitoring System for Multiway pH Value The CAD/CAM of Hydraulic Valve Block Based on Pro/Engineer Design and Implementation of a Computer Vision Based Inspection System Using CUDA Structure Reverse Design and CFD Analysis on Agitated Flow Field of Submersible Mixer Robust State-Feedback Controller Design for Uncertainty Singular Systems An Estimation Approach Based on Predictive Filtering to Missile Guidance Controller Design for Spinning Missile with the Actuator Limit The Time-Delay Study on Vehicle Active Control Suspension The Research on High-Voltage Transmission Line Relay Protection Setting Related to OLTC Anti-Icing Development of Islanding Detection Based on Power Controlling for Grid-Connected of Dispersed Power Generation The Stabilization of Singular Linear Large-Scale Control Systems with Output Feedbacks Multimode Adaptive Control for Tank Gun Control System Based on Tracking Differentiator Optimization of PMSM Sensorless Control Based on Improved PSO Algorithm Design of PID Algorithm Control System Based on DSP The Suspension System Design for the Tensioner of the Ocean Pipeline Barge Durability Test System of Four-Channel Motorcycle Wheel Speed Sensor Based on LabVIEW Improved CMAC Neural Network Control for Superheated Steam Temperature Researches on Start Control Strategy of CNG Engine Design of Embedded CNC Device Based on ARM and FPGA Study on Floating Raft Vibration Isolation System for Pumping Unit Distributed Flexible Strip-Type Soil Moisture Sensing and Detection System Design of Artificial Climate Chamber Control System for Food Crops Cultivation Based on Expert Knowledge Base Research on the Identification of Tubular-Furnace Based on CARIMA Model Development and Design of Dance Robot Based on Single-Chip Microcomputer AT90S8535 Study on Sliding Mode Control with Gray Theory for Electro-Hydraulic Servo System Research on FFU Power Supply Based on Variable Universe Adaptive Fuzzy Control Calibration System Development of Electronically Controlled Engine Based on CCP Analysis for Obstacle Negotiation Capability of Wheel-Legged Robot Research on the Singularity and Stationarity of 3-TPT Parallel Machine Tool Speed Sensor-Less Indirect Vector Control System Based on a Novel Sliding Mode Control Speed Observer Research on a New Automatic Instrument Transformer Calibrator Cascade Fuzzy Self-Tuning PID Control for the Liquid-Level Control of Double Water-Tank Design of Real-Time Monitoring System for Surface Water Pollution Based on GPRS Experiment on Ultimate Shear Strength Parameters of Bolt Anchored Section Application of Embedded Technology for Induced Polarization Instrument Alleviate Stressful Voltage Condition of Power System by Means of Adjusting the Generation Mode Considering Energy Saving Design of Double Closed Loop Control System of Automatic Clutch Application of Pressure-Rate Deconvolution to Well Test Interpretation of Low Permeability Reservoirs Research on Fault Diagnosis of Certain Armored Vehicle' Gear-Box with IMF's Energy Moment Study on Energy-Saving of Urban Water Supply System Variable Frequency Pumping Station Study on Voice Transmission System of the Optical Fiber for Tube Leakage Monitoring Installment in the Power Station Boile Optimizing Back Surface Field of Heterojunction Thin-Film Solar Cells by Numerical Simulation Identification and Quantitative Feedback Control of Precision Mechatronic Systems On Monitoring and Testing System of the Hydropower Unit Vibration Based on Virtual Instrument Technology Fuzzy Control Technology for Drive System of Switched Reluctance Motor Wavelet Neural Network Based Adaptive Robust Control for a Class of MIMO Nonlinear Systems The Research of DC/DC Power Storage Converter Controller Based on Hysteresis Control A New Model of Intrusion Detection Based on Data Warehouse and Data Mining Rapid Control Prototyping Design of DSP-Based Motion Controller Control System Design and Data Communication Realization of Road Accelerated Loading Test Equipment The High-Power of DC Power with Auto Tracking Power Frequency Design of New Automobile Rotational Speed Measuring Device High-Performance Sensorless Control of PMSM Based on Sliding Mode Current Observer Rotor Design for High Speed PM Machine Based on Riccati Transfer Matrix Method Multisensor Tracking of a Maneuvering Target in Clutter with Proposed Parallel Updating Approach Parameter Tuning for Sensorless Induction-Motor Drive Use Stator-Current-Based MRAS Estimator Research on Attitude Control of Spacecraft Based on ADRC Automobile Reversing Radar Based on Ultrasonic Wave Design of a New Structure for Anti-Upsetting of Axle-End in Wheelset Disassembly and Assembly Stress Distribution of Strip at the Parts in Contact with Roll in Continuous Annealing Furnace A Hybrid Algorithm to Solute the Problem of the Robot Path Planning Study on Start Burning Performance of Micro-ICP Using Stereo Spiral Coil Application of Time-Frequency Distributions to the Blind Source Separation of Mechanical Fault Signals The Study on a New Type of Full-Voltage Starting Method of Asynchronous Motors Extracting of Weak Periodic Impact Feature Based on Mean Filtering and Wavelet Transform Research on Design Key Technologies for High-Power Submersible Motor Experiment the Influence of Subsection on Leakage Reactance in Submersible Motor Overview of the Low Voltage Ride-Through Technology for Direct-Drive Permanent Magnetic Wind Power System Design of Detection Device for Solar Photovoltaic Lighting System Charge-Discharge Performance Application of Improved RBAC in System Login Component Design An Optimal Design Method Based on Feature Technology for Micro Device Dynamic Modeling of Single-Wheeled Robot The Application of the Niching Genetic Algorithm to Optimum Design of the YKK Series Induction Motor Design of a Remote, Real-Time Elevator Monitoring System Based on the c/os-II Operating System Design of an Automatic Positioning System Used in Pipe Crawler Weld Based on TMS320DM642 A High-Performance Signal Processing System for Monopulse Tracking Radar Core Loss Calculation in Step Magnetic of High-Speed Motor Stator Design of Bending Fatigue Machine for Flexible Electronics Cogging Torque Reducing in Dual-Rotor Motor by Suitable Selection Inner and Outer Slot Opening Widths Design of the Underwater Acoustic Signal Acquisition System Based on the Pipelined Twin-AD Design of External-Rotor Ferrite Permanent Magnet BLDC Motor Controlling of Brushless DC Motor Based on Particle Swarm Optimization Fuzzy Logical Controller Design of the A/D Conversion Circuit Based on ARM for the Time-Difference Method Ultrasonic Flowmeter Evaluation on the Tensile Force of Geotextile and Geomembrane Used on the Side Slope of a Waste Landfill The Control System on Coke Machine Interlocking and Automatic Running Design and Simulation of Variable Speed Constant Frequency Brushless Doubly Fed Wind Power Generator Study of Modified Sliding Mode Control Strategy for STATCOM with LCL Filter Design and Research of Crash Sense Module of Vehicle Emergency Call System The Simulation and Research of Chaos in Current-Controlled Boost DC / DC Converter Multi-Model Adaptation Fuzzy Control for the Deep Sea Walking Hydraulic Control System Analysis of Reliability for Hoist Main Control System Based on Markov Process The Design of Mini Quad-Rotor Unmanned Aerial Vehicle Control System The Synchronization Control of the Hydraulic Press Brake Based on the Virtual Shaft Control Algorithm A Fuzzy Compensation Control System for Underwater Vehicle Based on Kalman Filter Predictor A New Teaching Method in a Kind of Industrial Palletizing Robot A New Engineering Model of Solar Array and MPPT Control Optical Flow Sensor Designed for Altitude-Holding Flight The Robot Path Planning Based on Region Partition to Node Optimization Research on the Hybrid Active Power Filter Performance Improvement on Edge-Based Human Detection Using Local Contrast Enhancement Simulation Study of Harmonics and Reactive Power in Three-Phase Full-Bridge Controlled Rectifier Circuit with Resistance-Inductance Load Measurement of Ultrasonic Attenuation Coefficient of Mud Trajectory Tracking of a Spherical Robot Based on an RBF Neural Network Limiting Power of High Power Microwave Pulses from Aperture An Improved Design of Controller for Medium Frequency Induction Power Parameters Identification of Induction Motor for Electric Vehicle Based on Least Squares Method Study on VAV Temperature Fuzzy Controllers with Self-Tuning Parameters and Variable Universe Development of the Performance Testing System for Radio Fuze Robust Data Reconciliation in Linear Process Improved Differential Evolution Algorithm for Structural Optimization Design of Flumes with Hybrid Discrete Variables The System of the University Experimental Physics Course-Choosing on ASP Research on Permanent Magnet Linear Motor without Friction Feed Application Research of CMAC-PID Control in Photovoltaic Tracking System Design on Novel Photoelectric Sensor for Refractive Index Measurement Numerical Simulation of Hammer Forging Process for Inconel 718 Application Study of Active Disturbance Rejection Control Technology Study on Rheo-Diecasting for In Situ Synthesized Mg2Si/AM60 Composites A Study on Method of Map Conflation Based on Topological Relationship Excitation Control Strategy of Brushless Doubly-Fed Generator for Variable Speed Constant Frequency Wind Power System Implementation of a DirectDrive Technology Realization DC-Coupled Output on Video-Output Circuits Modeling and Testing a Screw Expander Integrated into a Trilateral Flash Cycle Research of Simulation Parameters of Oil Field Distribution Network Based on Grey Prediction Chapter 2: Powder Metallurgy and Ceramic Forming Nonlinear Immune PID Controller and its Application to the Heat Milling System's Material-Level Control A New Temperature Setting Control Method for Regenerative Rotary Reheating Furnace Study on Rapid and Non-Destructive Identification of Starch Categories with NIR (Near-Infrared Reflectance) Application of Improved Fuzzy PID Control Algorithm in Heating Furnace Research on Wood Powder-Based Rapid Prototyping Technology A Thermodynamic Model for Nearest-Neighbor Distributions in Annealed Quaternary Alloys Design and Development on Piezoelectric Ceramic Type Insole 3D Force Measurement System Based on LabVIEW Manufacturing Execution System Based on the Soda Ash Industry Study on Characteristics of Metal V-Belt Infinitely Variable Power-Split Transmission High Throughput Speciation Analysis of Mercury in Water Environment by Short Column Capillary Electrophoresis On-Line Coupled with Inductively Coupled Plasma Mass Spectrometry Chapter 3: Surface, Subsurface, and Interface Phenomena Dynamical Integral Sliding Mode Control for Permanent Magnet Ring Torque Motor Study of Pulsed Magnetic Field Generator for Magnetoacoustic Tomography Technology with Magnetic Induction The Infrared Characteristics of the Wall Temperature of Boiling Heat Transfer in Microchannel Feed Forward Active Disturbance Rejection Control Method for Common-Rail Pressure Control of Diesel Engine Electrical Properties of Multilayer Synthesized CuInSi Thin Film The Impact of Surface Tension on the Oil-Water Stratified Flow Improvement of Crystal Growth Control System Starting Performance of Novel Magnet Arrayed Permanent Magnet Synchronous Motor Research on the Microwave Propagation in the Evaporation Duct with Obstacles Performance Experiment of Natural Refrigerant Cascaded Refrigeration System Ultimate Slip between FRP and Concrete on their Interface The Effect of Drag-Reducing Polymer on Heat Transfer in Gas-Liquid Two-Phase Flow Determination of Trace Level Oxytetracycline and Influences of Coexisting Pollutants on its Sorption by Three Kinds of Sludge Research on the Coupling Relations of the Possible Factors Affecting Ammonia Nanofluid Bubbling Absorption FEM of Residual Stress of EDMed Surfaces Interfacial Microstructure and Strength of Friction Welding of Steel Tube to Aluminium Tube Plate Using an External Tool Application of Taguchi and Response Surface Methodologies for Surface Roughness in Rotary Tool Polishing Hardness Mould Steels The Effects of Materials Properties & Angle Junction on Stress Concentration at Interface of Dissimilar Materials Wear Behavior of Surface Treated Alloy Steel with Assorted Blends of Fine Particles by Using Plasma Spray Process A Study on Interfacial Reaction and Titanium Distribution in Brazing Sapphire to Inconel 600 Using Cu/Ni Porous Composite A Study on the Effect of Process Parameters on Surface Topography of Al Thin Films on Various Substrates Using AFM Chapter 4: Composite Materials Preparation of Geopolymer Using the Slag from Direct Reduction-Magnetic Separation of Refractory Iron Ore (SDRMS) Research of Person-Parachute System Motion in Free-Fall Phase Dexterous Robot's Finger Actuated by Pneumatic Artificial Muscle Study on PMV Index Forecasting Method Based on Fuzzy C-Means Clustering RVE Based Numerical Evaluation on Effective Mechanical Properties of Composite with Randomly Distributed Multi-Phase Inclusions Preparation of Modified Cu-Antibacterial White Carbon Black by Microwave Drying Study on Morphological Structure and Application of Ag-La-Inorganic Antibacterial Material Dying by Microwave A Study on Ammonia Nitrogen, Phosphorus and Organic Pollutants Removal of Zeolites by Salt Modification Effect of Ultrasonic Wave on Ni-P-Al2O3 Electroless Composite Coating on Magnesium Alloy Processing Method and Property Studies of Composite Geotextiles Chapter 5: Computer-Aided Design in Materials Engineering Computations for Simplification of Canned Cycles in CNC Programming for Turning Operations Application of Stochastic Differential Equation and Optimal Control for Engineering Problems Multi Objective Optimization of Noise and Vibration in Passenger Car Cabin by Using Goal Programming Approach A Framework for a Development of an Intelligent CNC Controller Based on Step-NC Realization CNC Controller Enable Machine Condition Monitoring Architecture Based on STEP-NC Data Model A Study on Extraction Method of Non Geometry Information in Engineering Drawing Title Block Identification and Fault Diagnosis of an Industrial Gas Turbine Using State-Space Methods Study on the Optimization Process Technology in NC Machining Based on the Polychromatic Sets Theory Adaptronic Systems in Robot Manufacturing Prediction of Tensile Behavior of DP 590 Steel Tailor Welded Blanks by ANN Design a Low Noise 5GHz Differential Cross-Coupled VCO and Colpitts VCO Using BiCMOS Technology Robust Part Quality by Controlling the Injection Moulding Process with 24 Fraction Factorial Design: A Case Study Web Adds Weighting Matrix Selection Method for LQR Design Based on a Multi-Objective Evolutionary Algorithm Secondary Development of Blades Parametric Design of Hydraulic Torque Converter Based on CATIA Single Input Multi Output Adaptive Network Based Fuzzy Inference System for Machinability Data Selection in Turning Operations Applying a Modified Particle Swarm Optimizer to Section Optimization of Steel Framed Structures Research on the High Frequency Realization of High-Power Inverter A Study on the Characteristics of Planar Motor with Halbach Array Stability Analysis of Beam's Non-Linear Vibration with Time-Delay Feedback Control Multi-Rate Digital Control for Pulse Detonation Engine Control Applications Implementation of Turntable Servo Control System Based on Fuzzy Self-Tuning PID Contour Extraction of Flame for Fire Detection Simulation Research on the Variable Step Size MPPT Control for PV System Comparisons between Topologies of Flux-Switching Electrical Machine The Unified Design for Inter-Area Stability Control Based on Backstepping Using Governor Sensitivity Test Method to Analyze Moment of Inertia of Engine Generator Set Systemic Design of Four Vat Energy-Saving Quenching Machine Controller Esterification Research on a Bio-Oil Model Compounds System with an Optimal Solid Acid Catalyst Influences of Clearance in the Nether Wearing Ring on the Self-Excited Vibration of the Francis Turbine Navigation System of Mobile Platform Based on Open Architecture for Agricultural Machinery Synchronization Control Strategy Applied in Two Cylinders System of Rolling Mill Electromechanical Actuator Controller Design with Optical Encoder Feedback Study on Assessment Model of Lightning Proof Abilities of HV Transmission Line Based on ArcGIS PXI-Based High Performance Data Acquisition System for Fuel Injection System of Diesel Engine Research of Video Tracking Algorithm Based on the Blob Analysis Generalized Multiple-Model Adaptive Estimation for Mars Entry Navigation Research on Transient Fuel-Film Compensation Control Strategy for a Port-Fuel-Injected Engine The Air Controlled Hydraulic System Design of 3201z-Type Dump Truck Lifting Mechanisms The Design and Analyses of Magnetorheological Fluid Throttle Valve Design of Automated Distillation Analyzer Based on STM32 Seal System Optimization Study of an On-Off Valve Based on CFD Hoist Safety Risk Assessment Model Research Research on Auto Control System for Ship Loader Based on AC800M Motor Position Detection Unit for Servo Control Application A Mesh-of-Appendixed-Trees-Based Technique Carried on the Crossed Cube Key Establishment Scheme for Distribution Automation System Using Logical Key Hierarchy Approach Research on State Intelligent Maintenance Based on Sonic Information of Power Transformers Research on Technology of Thrust Asymmetry Lateral Compensation for Large Aircraft Application of Fuzzy Control in Transformer Cooling System Time-Varying Sliding Mode Control for Linear Motor Servo System Human-in-the-Loop Intelligent Control System for Continuous-Flow Grain Drying Combined Simulation Based Commutation Failure Analysis in HVDC Systems A Novel Automated Balancing and Correcting Machine Analysis of Fault Recorder Data for Short-Circuit Current in a 500kV Busbar Short-Circuit Accident Electromagnetic Design of Dual Stator-Winding Induction Generator System with Boost Converter Interaction and Coupling of Robot The Study of the Multi-Body System Theory on Basis of CNC Milling Machine Error Design of Underground Mining Personnel Locating System Based on nRF24L01 The Realization of Palm Kneading for Chinese Massage Robot Path Planning of Avoiding Obstacle for Fruit-Picking Manipulator Based on Position Information Design of Direct Yaw Moment Control System to Enhance Vehicle Stability Based on Fuzzy Logic High Efficiency 500W RF Generator Design of Remote Transmission System for Wireless Heat Metering The Optimal Controller Design of Zero Steady-State Error for Nonlinear Systems with Composite Disturbances Research on Linear Motor for Linear Compressor Simulation and Parameters Tuning of Second Order ADRC Controller in Simulink Active Power Smoothing of Wind Generator Based on Wind Speed Prediction and Inverse-System The Method of Pole Width Modulation Reducing Cogging Torque in Permanent Magnet Motor Fault Feature Extraction for Gearboxes Using Empirical Mode Decomposition Development on a Test System for Starting Relays Based on IPC Determination of Key Technical Parameters of Special Hydraulic Turbine for Cooling Tower Research on the Design of Linear Drive Motor of New Pumping Unit Research on the Pumping Unit Model Driven by Linear Motor Statistical Method for Rotating Machine Fault Diagnosis Research on Knowledge-Based Injection Mould Project Design System The Optimization of ITD in Direct Air-Cooled System Research on the Multi-Parameters Matching Control of the Cooling System for the Diesel Engine on the Numerical Simulation Technology Research on Parametric Design Method of Combustion Chamber on Diesel Engine The Review of Technology of Power Quality Disturbances Generator The New Elman ANN Application in Accuracy Improvement of Robot Navigation and Obstacle Avoidance Technology UAV Automatic Landing Control Law Design and Application of Long Distance Oil & Gas Pipeline Stress & Strain Monitoring Sensor Modeling of Distillation Tower Temperature Based on D-FNN Research on a New Type of Lithium Battery String Equalization and Management System Application of FSK Technology in Welding Machine New Idea of the Multilevel Leakage Protection in Underground LV Distribution Networks Research of Linear Differential Hall Sensor Modeling and Output Characteristics Experiment Application of RBF Neural Network in Dynamic Weighing A New Method of Rolling Prediction for Gas Emission Based on Wavelet Neural Network The Design of Five Degree of Freedom Robotic Arm System 2-Phase Symmetrical PWM Generator Using CPLD for Ultrasonic Motor Drive Nonlinearity of PMSM's Low-Speed Operation Caused by Dead-Time Model and Auto Take-Off Control Law Design of Unmanned Aerial Vehicle Digital PID Algorithm of Navigation System for Spraying Robot Study and Implementation of Fault Diagnostic Algorithms on Hydraulic Power Cart for Aircraft Low-Cost PLC-Based Control of a 2-DoF Purely Translational Parallel Robot A Misfire Fault Diagnosis System Based on Improved Neural Network Modeling of Multi-Agent System for Drilling Simulation Design for the High-Rise Cable-Suspended Rescue Robot Servo Motor Synchronous Control System Based on PMAC Controller Research of Redundancy Management on Fight Control Computer for Unmanned Aerial Vehicle Research on Internal Communication of Redundant Flight Control Computer for UAV Study of Missile Radiator Predicting and Tracking Technology on the Basis of Kalman Filter and Mean-Shift Algorithm Research of Optimal End Guidance Law about Target-Seeking UAV under Passive Guidance The Software Design and Implementation of a Real-Time Automatic-Tracking System Infineon Microcontroller Based Frequency Converter Design Motion Consistence and Textural Coherence based Error Concealment Algorithm for Corrupted Macroblock Intelligent Autonomous Navigation System for the Wheeled Mobile Robot Trajectory Control Using Linear Control System on Mobile Robot Start Control of Ultrasonic Motor Based on Neural Network New Method for Construction Land Prediction Incorporating Genetic Algorithm and Support Vector Machines Research on Powertrain System of Series HEB Control Strategy Simulation Research on Management Information Platform of Dynamic Water Rights Based on Grid Technology Energy Storage and Deposition Characteristics of Spark Ignition System System Based on BP Network for Garment Quality Forecast and Management Numerical Analysis on Propagation and Fatigue Life of Asphalt Pavement Surface Crack Parameterized and Modular Theory Used in Rapid Design System of Simi-Trailer Tanker Chapter 6: Casting and Solidification Study and Application of the Variable Torque Slipping Clutch with Skewed Rollers Hybrid Genetic Algorithm-Based Production Planning for Steel-Making and Continuous Casting Process Mudstone Creep Test and Numerical Stimulation of Casing Loads in Deep Well Research on the Integration Credibility Model of COTS Simulation and Implementation for the Speed Control System of Horizontal Continuous Casting Dragger for Copper The Analytical Solution of Single Pipe Piles under Axially and Laterally Free Loads Analysis of Piles Subject to Axial Load and Lateral Soil Movement Experimental Research on Vacuum Casting of Micro-Gears A Novel Technique for Crack Resistance of Bulk Mass Concrete Pier The Application of New Blasting Technique on the Replacement of Soft Silt Foundation by Rock Filling Properties of Pressurized Lost Foam Casting of Al-11Si Alloy Formation Behavior of Intermetallic Layer on Die Material in Casting Al-Si Alloy with the Variation of Fe Content Rapid Solidification Processing: Melt Spinning of Al-High Si Alloys Chapter 7: Machining Synthesis of Zeolite Membranes from Coal Fly Ash Improvement of Local Decrease in Material Thickness on Fuel Filler Tube Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Investigation of Material Removal Rate A Method to Reduce Milling Time for Ti-6Al-4V Alloy for Controlled Depth Milling Using Abrasive Water Jet Machining Investigation of Static Failure for Cemented Carbide Cylindrical End Mill The Using of Anti-Sulfur Drill Pipe in High Sulfur Oil-Gas Field Backstepping Adaptive Control of NC Tool Crossbeam Magnetic Levitation System Static Performance Parameters and Analysis of the Hydraulic Expansion Toolholder Design about Monitoring and Diagnosis System Structure of Rotating Machinery Based on LabVIEW Decomposition of Cefotaxime Sodium Wastewater by Ultrasonic Fenton Method Finite Element Simulation of the Residual Stresses in Butt Weld Plate of Aluminum Alloy Vibration Simulation of Articulated Dump Truck with the Variation of Longitudinal Center of Gravity Position of Rear Sprung Mass and Rear Suspension Stiffness Development of Drill Monitor and Operation Mode Recognition Based on All Hydraulic Core Drilling Rig Research on Starting Process of a Novel Wound Rotor Line-Start Permanent Magnet Synchronous Motor A Finite Element Analysis of the Normal Combination Round and Spline Broach Based on ANSYS Performance Analysis of Doubly Excited Brushless Machine with Radially Laminated Magnetic Barrier Rotor Study on Electronic Excitation Temperature of Argon Plasma Using Low Pressure Micro-ICP Excitation Source Analysis on Variability of Mechanical Parameters in the Process of Rock Damage Influence of Rotor Structure on Starting Performance of PMSM Used for HEV Broken Rotor Bar Fault Detection Analysis The Synchronous Control Study of once Forming Leaf-Spring Rolling Mill Oscillation Characteristic of Single Free Piston Engine Generator Experimental Research on Regenerative Braking of Wheel-Hub Motor Collapsing Pressure of Casing Located at the Bend Part of Casing-Exit Sidetracking Well Round-Guard System Based on the Vibration Cable Transducer Static and Dynamic Characteristics Study of Wind Turbine Blade Study of Fluxing Process for Hot Dipping Galfan Alloy on Steel Wire Research on Growth Process and Microstructure of Microarc Oxidation Coating on Titanium Research on the Characteristic of Diesel Elastic-Plate Impingement Spray Experiment Study of Chip Formation and Cutting Force of Hardened AISI 1045 Steel in High Speed Machining Analysis of Main Dimensions Effects on Performance of Transverse Flux Switched Reluctance Motors Study on Acoustic Emission Source Character of Various Welding Defect Types The Experiment Research on Applying Air Source Heat Pump in Boiled Water Machine Scattering by a Conducting Infinite Cylinder Illuminated with a Gaussian Beam Research of Catalytic Performance over Transition Metal Modified MnOx-CeOx/ACF Catalysts Chapter 8: Modeling, Analysis, and Simulation of Manufacturing Processes Control and Robust Vision Relative Navigation for Autonomous Aerial Refueling Transient Stability Simulation by Explicit and Symplectic Runge-Kutta-Nystroem Method Research of Redundancy Management on Dual-Redundancy Brushless Direct Current Electric Rudder Loop Research on Islanding Detection for Grid-Connected Inverter and Protection Criterion Based on Fuzzy Clustering Analysis Characteristic Analysis of the Coupled Harmonic Model and its Application in Harmonic Power Flow Design and Achievement of the Erection Test System Controlled by Single Neuron PID Controller An Algorithm of Converting UG Model to MCNP Geometry Model Modeling and Analysis of Electro Hydraulic Brake System Based on AMESim/Matlab Modeling and Design of Hydraulic Driving Hobbyhorse Clamp Holder Extreme Weather Loading Risk Model of Overhead Transmission Line Fuzzy Control of Vehicle Suspension System Study on Simulation of Three-Phase Z-Source Inverter for Grid-Connected Wind Power Generation High-Sealing Microvalves for PCR Waveform Relaxation-Based Large-Scale Circuit Simulation for MOSFET and Lossy Coupled Transmission Line Circuits Effect of Magnetic Circuit's Structure Parameters on Torque-Speed Characteristic for Electromagnetic Damper Numerical Simulation of the 1.2MW Wind Turbine Flow-Field Theories on the Digitalized Intelligentized, Networked, Miniaturized Development of Electronic Technology Research on Transient Stability Simulation of Ship Power System The Fine System-Level Calibration Technique of Size Effect Error for the Fiber-SINS Analytic Prediction of Inductances for Toroidal Motor with Concentrated Windings Design and Application of the Multifunctional Digital Automobile Instrument Weak Coding Signal Detection under the Background of Sea Clutter An Optimized Angle Control Strategy for Doubly Salient Electro-Magnetic Motor Based on the Half-Bridge Converter The Study on the Fuzzy Control Algorithm for Main Steam Pressure Control of Circulated Fluidized Bed Boiler Analysis of Tribological Characteristics between Plastic and Steel Helical Gear Simulation and Research on Double Cylinder Hydraulic System Synchronized Control for Segment Erector of TBM Real-Time Optimization of Transportation System for Earth-Rock Filled Dam Construction with GPS-Based Monitoring System Salient Pole Force Analysis and Inhibition of Tubular Permanent Magnet Linear Synchronous Motor Modeling and Simulation of Propeller and Hull System for Marine Propulsion Plant Design of Coarse-Fine Combined Synchronization Control System for Lithography Based on Cross-Coupled Sliding Mode Control Internal Model Control of Three-Phase Four-Leg Active Power Filter Based on Online LS-SVM ANN Inverse System Method Research on Stability of Networked Control System with Uncertain Time-Varying Delays An Improved Z-Source Boost-Buck Rectifier Topology with Lower DC Output Voltage Fuzzy Hierarchy Comprehensive Evaluation on Dam-Break Risk Analysis A Simplified Model of Write Amplification for Solid State Drives Adopting Page-Level Address Translation Mechanism Stabilization for Quantized Feedback Control Systems: An LMI Approach Optimization Design on the Iron Beam Sectional of the Electricity Transformer Simulation Research of AC Servo Driver Speed Adjusting System Based on SVPWM An Adaptive Tracking Algorithm of Maneuvering Target New Method to Ameliorate the Large Telescope Speed Smoothness Improved Power Flow Algorithm Incorporating Multi-Terminal VSC-HVDC Radial Laminated Magnetic-Barrier Rotor Optimization Design of Brushless Doubly-Fed Machine Analysis on Ground Subsidence in Underground Mining Numerical Simulation of Flow Field in Burnt Lime Hydrator Thermal Stress Simulation of the Surface Grinding Numerical Simulation of Particle Axial Mixing in Rotary Kiln An Automatic SoC Design Methodology for Integration and Verification Modeling of Electromagnetic Heating Systems Design and Analysis of a Piezoresistive Accelerometer with the Film-Island Structure Application of Model Predictive Control Based on BPNN to Heating Boiler The Optimization Model and its Algorithms for Multiple Transportation Modes Selection in the Fourth Party Logistics Analysis of Reactor Magnetic Circuit Based on ANSYS Command Flow Numerical Simulation of Fluid Transients in Servo-Controlled Hydraulic Piping Analysis of Snubber Circuit Parameters Based on an Excitation Controlling Circuit Strategy and Implementation of System Performance Optimization Research of Closed-Loop Calibration Model Based on Kalman Filtering Algorithm Restrike Modeling of Vacuum Circuit Breaker Switching Off Shunt Capacitor Banks with EMTP Research on Numerical Simulation of Dynamic Pressure for Stress Sensibility Coal Seam Study of Voltage Level Sequence Based on the SE-DEA Model The Research and Analysis Based on a New Hybrid Chaotic Sequences Modeling and Simulation for Boost Converter Based on HDS Theory A Procedure for Modeling of Holonic Control Systems for Intelligent Building (HCS-IB) Research on GMM Background Modeling and its Covariance Estimation Study and Application of ESD Generator Modele A Method for Modeling and Simulation of Differential Drive Mobile Robot Localization Based on EKF Multisensor Fusion A New Format Power Flow Computation Software Analysis and Design Based on MATLAB A New Method for Modeling of Fully Flexible Aircrafts Simulation Study of Variable-Frequency Speed-Regulation Vector Control System of Asynchronous Motor Research and Analyze on the Lightning Test of Aircraft Model Modeling of Active Flexible Suspensions by Mobility and Transfer Matrix Simulation for Expansion of Fabrication Hydraulic Torque Converter and Corresponding Experimental Investigation Modeling and Simulation of Electric-Hydraulic Clutch on Light Vehicle Study on Modeling and Simulation of Digital Factory Technology in Complex Production Development A Blackout Model Based on Optimal Risk Index and High-Risk Line Identification Computational Model for Machine Vision Inspection Based on Vision Attention Fuzzy Based Model Predictive Control for Uncertain Nonlinear System Temperature Simulation on Rotor and Stator of Hydro-Generator Output Feedback Adaptive Maneuvering for Nonlinear MIMO Systems with High Frequency Gain Matrix Hurwitz The Operating Point Determination of Special Turbine in Cooling Tower Aircraft Landing Gear of a Dynamic Research and Computer Simulation Research on the Pollution Diffusion Regularity near Sewage Outlet Areas in Yuncheng Reach of the Fen River Numerical Aperture and Partial Coherence Optimization in Optical Li-Thography under Off-Axis Illumination Lack of Oil of Oil-Paper Capacitive Bushing Damage and its Judging Methods Study on Improving Power System Damping Characteristic in Novel Excitation System A Simple Method of ABS Optimal Slip Ratio Identification Rotor Speed and Stator Resistance Identification of Direct Torque Control for Induction Motor Based on Mutual MRAS Numerical Modeling and Solution of Ground Water Inrush at the Baixiangshan Iron Mine Study on Regulating Reservoir Changing Water Resource Value Mechanism The Research of Traveling Wave Fault-Location Methods for the 10kv Distribution Networks Computer Data Structure for Geological Entities Modelling Based on OO-Solid Model Research on the Efficiency Evaluation Model of Fire Command Automation System A New Method for Faulted Line Identification in Neutral Non-Grounded Distribution Systems The Simulation of Pitch Control System for Variable Speed Wind Turbine Based on Neural Network Design of Li-Ion Batteries Equalization Module of Electric Vehicle System Stability Improvement of DG Connected to the Grid Based on Power Conversion and Energy Storage System The Remote Warning and Diagnosis System for CNC Machine Tools Finite State Machine to Optimize Multi-Tasking Concurrence Technology for Real Time Operating System The Simulation Design of Spatial Arc Cam Numerical Control Maching Model Designing and Simulation Realization of ARC Protection System Based on GOOSE Information Model of ARC Protection System Based on IEC 61850 Study on Pilot Performance Model The Principle and System Design of Self-Cleaning Filter Comparison of Expert and Novice Eye Movement Behaviors during Landing Flight A Device Reactive Capability Assessment Model Based on Improving Voltage Stability L Indicator NURBS Interpolation Algorithm Based on Feedrate Sensitive Points Identification The Performance Assessment and Optimal Design of EWMA Charts Based on Average Product Length Finite Element Simulation on Temperature Field Couple under Contact Resistor Thermal and Friction Thermal in Friction and Wear A Domain Decomposition of the Finite Element-Boundary Integral Method for Scattering by Deep Cavities Study and Simulation for MPPT Control of Photovoltaic Generation System Based on Combining Constant Voltage Method with Adaptive Duty Cycle Perturb Method Simulation of Islanding Detection for Photovoltaic Grid-Connected Inverters Based on Positive Feedback Intermittent Frequency Drift Research on Energy-Saving Control Technology of Boiler Fuzzy Parameters PID Control and Simulation Experiment of Permanent Magnet Linear Synchronous Motor A Flux Observer of Voltage-Current Model Based on PI Regulator Analyze of Vehicle Active Rollover Control on Air Spring Refinement Envelope Analysis for Small Failures of Rolling Bearing Research on the Influence of Zero Space Voltage Vectors on Direct Torque Control of PMSM Research on Modeling and Control Methods of Variable-Speed Variable-Pitch Wind Turbine Generators Characteristics Analysis of a Novel Detent-Force-Based Magnetic Suspension System An Approach for Electrical Inter-Harmonic Analysis Based on W-H Transform Model Reduction of a Two-Link Rigid-Flexible Manipulator Based on Spectral Approximation Method The Simulation Research of Rotor Flux Model in Asynchronous Motor Control The Analysis of Air Gap Flux Density in Permanent Magnet Brushless Motor with External Rotor The Design of the Small Automatic Batching Machine Control System The High-Gain Boost Converter for Maximum Power Point Tracking in Photovoltaic System Research on Key Technology of Airport Simulation Based on OSG Chapter 9: Composite Materials II Synthesis and Industrial Trial of New Composite Cationic Flocculant PAFS Analysis on the Loading Stress, Thermal Stress and Coupling Stress in PCC-AC Composite Pavement The New Fire Prevention Materials Using in the Coal Fire Zones-Foamed Gel Study on Stirring Brazing of SiCp/A356 Composites with the Zn27Al Filler Alloy in Air A Study of Structure Parameters of Block Copolymers Polystyrene-Polyethylene Oxides Damping Analysis of 3D Composite Structure Embedded with Visco-Elastic Layer Experimental Study of Mechanical Properties of Multiscale Carbon Fiber-Epoxy-CNT Composites Investigation of Mechanical Behavior of Stir Casted Al Based Composites Reinforced With B4C Nanoparticles Effect of Milling and B4C Nanoparticles on the Mechanical Properties of Nanostructured Aluminum Composite Produced by Mechanical Milling and Hot Extrusion Mechanical Characterization of Polypropylene Natural Fibre Composites Energy Absorption Capability of Hybrid Tube Made by Mild Steel and GFRP under Quasi-Static Loading Direct Extrusion of Circular Profiles with Surface Composite Produced by Friction Stir Processing Influences of Tool pin Profile on Microstructure and Mechanical Properties of Al/Cu Composites Fabricated via Friction Stir Processing Some Investigations of Wet Sliding Behaviour of Al - SiC Particulate Composites Composite Clayey Sand and Short Fiber Multilayer Synthesized CuInSi Composite Film by Magnetron Sputtering Inorganic Composite Material Based on Fly Ash, Red Residue from Bauxite Ore for Road Building Projects in Vietnam Chapter 10: Materials Forming Effect of Blank Holder Force with Low Frequency Vibration Technique in Circular-Cup Deep-Drawing Using AZ31 Magnesium Alloy Sheet Performance of Modified Epoxy Resin by Inorganic Packing Characteristic Features of Thickness Change of Pipe during Die Forming Austenite to Ferrite Transformation after Hot Deformation of Low Carbon Steel Rolling Stock Times and Aluminum Profiles Extrusion Development in China Sucking Machinery of Transport for Dosing Granulations of Plastics at Injection Molding An Upper Bound Analysis of the Ring Rolling Process Review of STEP-NC Compliant System for Turn-Mill Operations Based on Nash Optimization Decoupling Control System for Special Shape Pipe Automatic Welding Machine Research on Meshing Theory of Involute Helical Gear with Asymmetric Research on Dynamic Characteristics of Disc Brake Analysis on the Process of Induction Heating for Shrink-Fit Chuck Sensorless Control of SPMSM Based on High-Frequency Current Signal Injection in the Direct Axis at Low and Zero Speed Finite Element Analysis of Ring-Plate Indexing Cam Mechanism Contact Stress Based on MATLAB and ANSYS Resonance Analysis of Manipulators with Flexible Link and Flexible Joint Optimum Design of Movement Parameters for Soft Plastic Vibration Sorting Machine's Screen Preload Analysis of Bolt for a Small Pneumatic Cylinder Component of Clathrate Hydrates Formed in CH4-TBAB-H2O System Preparation of Expanded Perlite-Based Binary Eutectic Composite of Phase Change Heat Storage Materials Study on Natural Gas Converted to C2 Hydrocarbons in Plasma State Chapter 11: Materials Behavior Study on a Methane and Acetylene Spectrum Absorption Mode Gas Sensor with Optical Fiber Spectrum Absorption Methane Gas Sensor with Optical Fiber Based on Frequency Harmonic Detection Mechanism Research on Radial Inflation of Steel Tubes to Enhance the Crashworthiness of Vehicles Based on the TLM Method 1000kV UHV Transmission Line Performance Analysis Experiment Study of Coal Char Combustion Characteristics Under Mixed O2/CO2 Research on Adaptive Rotor Flux Observer with the Speed Feedback and Rotor Resistance Disturbing Analysis for Radiation Characteristics of Horn Antenna for Out of Band Fatigue Life Assessment of Crane Reel Kinetics of the Ozonation of Tetrabromobisphenol-A in Wastewater Influence of Additive White Gaussian Noise on the Interpolation Method of Discrete Spectrum An Improved Direct Neural Network Approach to Flatness Pattern Recognition Baseed on GA-RBF Analysis of Electromagnetic Field and Temperature Field of Low Speed High Torque Permanent Magnet Motor under Locked-Rotor Operation The Characteristics of Melt Flow in Composite Spinning Micropore Simulation and Dynamic Characteristics of Discharging Process of Storage Tank Used in Conventional Air-Conditioning General Model of Optimal Control of Fully Flexible Vibrating Suspension Systems Numerical Simulation of Dimethyl Ether/Air Laminar Diffusion Combustion Characteristic with the Different Fuel Inlet Velocity and Rotate Speed The Improvement of Anti-Surge Control on Air Separation Compressor Effects of Pressure Ports Layout on Angle of Attack and Sideslip Estimation in the Flush Air Data System Effects of Additive on the Desulphurization Characteristics of Wastes Effects of Speed Ratio K Value of Rubber-Bar on Cotton Harvesting Performance Study on the Effects of Coal Blending on the Slurry Ability of Shenmu Coals An Experimental Study on Nitric Oxide Reduction through Coal-Biomass Blend Reburning Research on NDT System of Steel Bar Crack Research on the Cr (VI) Absorption by Floc-Type Biosorbent AR Heat Transfer and Anti-Fouling of Liquid-Solid Two-Phase Flow in Cooling Water Pipes of Staves Temperature Calculation on Phase Lead Connecting Structures of 1100MW Generator Stator Parallel Rings Study on Magnesium Alloy Sheets Deep Drawing at Gradient Temperature Corrosion Resistance of Fe-B Alloys Immersed in Molten Zinc Bath Adsorption Characteristics of Nitric Oxide and Sulfur Dioxide on Coal Activated Carbon Fiber Optic Dynamic Light Scattering Systems An Experimental Study on Diesel Fuel Droplets Coupling Evaporation Optimal Control of the Industrial Furnace System The Corrosion Resistance of Zn-Plated Samples with Blackish Green Passivation Film Studying on the Propagation Behavior of Bent Crack Bending from Slant Pre-Crack with Compressive Residual Stress Non-Thermal Plasma Assisted Catalytic Oxidation NO over Mn-Ni-Ox Catalysts at Low-Temperature Study of XLPE Cable Materials Impurity Detecting Based on CCD Technology Indoor Localization System Based on an Ultrasonic Sensor Network The Study of Polymer Material Transference Phenomenon Measurement Method Trace Gas Sensor Based on MEMS Cantilever Resonator Growth Kinetics of Tetra-N-Butyl Ammonium Bromide Semiclathrate Hydrate through Concentration Determination and Microscopic Observation Evaluation of Flexural Performance for Prestressed Concrete Beams with FRP Tendons Effect of Chitosan/Polymeric Aluminum Composite Flocculant on Activated Sludge Recycling Of the Epoxy Resin of the Waste Printed Circuit Boards Using Solvent Extraction Effect of Coupling Agents on the Mechanical Properties of Wheat Straw Flour and Polyethylene Composites Comparison Experiments on Relieving Differential Settlement of Subgrade by Graded Crushed Rock in Different Particle Sizes The Experimental Study on Fatigue Properties of CFRP Reinforced Concrete Beam Materials Flow Analysis on the System of Flue Gas Desulfurization and Denitration with Pyrolusite Slurry Study on Dispersion Behaviors of Oolitic Hematite Ultrafine Particles in Water The Technology and Equipments for Producing Gesso Blocks in a Wet Environment by Directly Using Desulfurization Gypsum Characteristics of the SiN Uniaxial Strained NMOSFET with Channel Fluorine Implantation Efficient and Stable Photocatalytic Activity of CeVO4/TiO2 Nanocrystalline Heterojunction under Visible Light Irradiation Preparation of Visible-Light-Responsive TiO2-xNx Photocatalyst by a Very Simple Method Effect of Thickness on the Mechanical Properties of Magnesium Alloy Stent Development of Inorganic Gas Barrier Material in Solar Cell Devices for Planarization Properties and Sublimate Defect Reduction Parametric Optimization of PMEDM Process with Chromium Powder Suspended Dielectric for Minimum Surface Roughness and Maximum MRR Deformation Behavior in Pipe Production Process for New High Strength Microalloyed Steel Parametric Instability of Laminated Composite Doubly Curved Shell Panels Subjected to Hygrothermal Environment Hot Corrosion Studies on Bimetallic Combinations of Monel 400 and AISI 304 Subjected to Molten Salt Environment Microstructural Characterization of Wire Electro Discharge Machined Tungsten Carbide Cobalt Metal Matrix Composite High Speed Impact Characteristics of Plastic Material Based on Finite Element Simulation Characterization of Feedstocks for Injection Molded SiCp-Reinforced Al-4.5 wt.%Cu Composite Numerical Investigation of Hollow Metal Cross Section Profiles on Impact Effect of TiO2 on Optical Properties of PMMA: An Optical Characterization Variation of Optical Band Gap Width of PVA Films Doped with Aluminum Iodide Allotropic Modification Induced by Co60 Radiation on the Structural and Optical Properties of Aromatic Polymers Research of Correctness on Internal Stress Measurement in Aluminum Alloy Thick Plate Structural and Optical Properties of Zn Doped CdTe Thin Films by Stacked Elemental Layer Method Effect of the ZnO Rods Growth Time to the Conductivity of ZnO Thin Film Combined with N3 Dye Effect of Barium Aluminates on Acid Resistance of Fracturing Proppants Effect of Hydrogen on the Properties of Amorphous Carbon Nitride Films Study on the Properties of Ultra High Performance Fiber Reinforced Concrete Investigating the Mechanical Properties of 0.5% Copper and 0.5% Nickel Austempered Ductile Iron with Different Austempering Parameters Deep Cryogenic Treatment on Aluminum Silicon Carbide (Al-SiC) Composite Microstructure and Friction and Wear Properties of the Composite Material of TiC/7075 in Powder Metallurgy Structural and Mechanical Properties of Ti1-XAlxN Studied by Ab Initio Chapter 12: Aerodynamics Study on the Degradation of Low Molecular Organics Using Boron-Doped Diamond Electrode Properties and Sintering Mechanism of Lightweight Sludge-Flyash-Clay Ceramics Technology Research on Waterworks Sludge for Ceramsite Effect of Axial Force on Mechanical and Metallurgical Properties of Friction Stir Welded AA6082 Joints The Accuracy Analysis on the External Circular of Zirconia Ceramic Spindle by Precision Machining Preparation of Self-Releasing Glaze Ceramic Materials Utilizing Red Mud Chapter 13: Environmentally Sustainable Manufacturing Processes and Systems Sustainability Index Benchmarking in a Semiconductor Manufacturing Environment Producing Paper Using Pineapple Leaf Fiber Effect of Material Selection on the Life Cycle Assessment of Environmental Impact Critical Success Factors of Green Design Implementation for Malaysia Automotive Industry Sustainability Manufacturing Assesment using PCA for Thai SME Bus Building Companies Influence of Slag and Slag Cement on the Strength of Sustainable Concrete Steel Slag as Neutralization-Adsorption Material for Treatment of Acidic Zn2+ - Containing Wastewater Engineering Research on ECOSUNIDE Technique for Nutrient Removal from Municipal Sewage A New Method for Designing the Size of Energy-Storage Capacity in Grid-Connected Wind Farm Effect of Low Concentration Alkali and Ultrasound Combination Pretreatment on Biogas Production by Stalk A Solar Array Simulator Using a Buck Configuration for Small Communications Satellites Design of Photovoltaic Generation Grid-Connected Inverter Based on DSP A Study of Phase-Locked Technology of Wind Power Generation Three-Phase Grid-Connected Inverter Research on Heat-Supply Energy Conservation Supervisory Controlling System in the Substation with Peak-Shaving Boiler The Automatic Energy-Saving Control Strategy for Coal-Fired Boiler Heating System CAN-Based Monitor and Control Platform for Battery Management System Reliability Evaluation of Electric Power System Containing Distribution Generation Research of Torque Control in Large-Scale Wind Turbine Research on Warship Intermediate Frequency Power System Technique of Digital Electro Hydraulic Automatic Control of Hydro Mechanical Transmission Study on Simulation for Solar Heating System for Biogas Modular Design of Standard Plant Based on Simulation of Architectural Physical Environment Research on High Temperature Mechanical Properties of Casing in Complex Environment Deep Well Simulation on Natural Ventilation in Double-Skin Curtain Wall Analysis on the Applicability and Control Strategies of Using CO2 to Control Fresh Air Study on Directly Driven Wind Turbine with Permanent Magnet Synchronous Generators (D-PMSG) Excitation System with Voltage Regulator for Marine-Use Brushless Synchronous Generators A FLC-PID Controller for Variable-Pitch System of Wind Power Generation A Novel Bidirectional DC-DC Converter with Robust Control Scheme for Flywheel Energy Storage System Study on MPPT Control of the Single-Stage Grid-Connected Photovoltaic System CFD Application on Ventilation System of Hydro-Generator Analysis of Material and Energy Flow Variation for Energy Saving and Consumption Reduction in Pelletizing Process Simulation Studies for Doubly-Fed Wind Generator Based on Neural Network Internal Model Control DFIG Wind Power Generation Based on Direct Two-Stage Matrix Converter Predatory Search Strategy for Load Distribution of Multiple Chiller Water Units for the Purpose of Energy Saving A Method for Water Quality Remote Retrieva Based on Support Vector Regression with Parameters Optimized by Genetic Algorithm Processing Method for the Node of Wind Farm in Power Flow Calculation Universal-Joint Sun Tracking Method and Tracking Device A Study on the New Grid Integration Solutions of Offshore Wind Farms The Design of SCADA System for Wind Farm Research and Evaluation on Environmental Economic Dispatch Including Wind Farm Based on Relative Entropy Balance Design of Solar-Wind Complementary Grid-Connected Power Generation Monitoring System for Teaching A Novel Algorithm for Fast and Adaptive Maximum Power Point Tracking of Wind Energy Generation System Flow-Structural Coupled Finite Element Analysis of the Monopole Steel Tower under Wind Load Dynamic Energy of a Large Scale Transmission Tower Subjected to Wind Excitations Design of the Oil Well Multi-Parameter Monitoring System Analytical Study on Wind-Induced Vibration of Ice Coating Transmission Line Systems Impact of Plane Heterogeneity of Sandstone's Thickness on Water Flooding Effectiveness A Novel Protection of Transmission Lines for Two +/-500kV HVDC Systems Erected on the same Tower Study on Nitrate-Impregnated Sulfur Dioxide Sorbent Derived from Sewage Sludge Study on the Effect of Leaching as of Phosphogypsum on the Soil Environment Variational Data Assimilation for Renewable Wind Energy Predictions: China Inner Mongolia Case Study Environmental Impact of Waste Slurry in Pile Foundation Construction of High-Speed Railway Bridges and its Countermeasures Research on Wet-Chemical Deformation of Roadbed Built with Weathered Stone Spatial Structure of Danwei Compound towards Low-Carbon - Case Study of Space Change in HUST Advanced Wastewater Treatment under Different Dissolved Oxygen Conditions in an Innovative Step-Feed Process Application of 3d Time Domain Method for Seismic Soil-Structure Interaction Analysis of Spatial Grid Structure Differential Absorbance Spectroscopy in Studying Natural Organic Matter Reactivity in Disinfection By-Products Formation: Comparison and Applicability Allelopathic Effect of Typha Angustifolia L. on Phytoplankton Study of the Treatment of Coking Wastewater by Biological Nitrogen Removal with Physical-Chemical Process The Analysis and Applying of Industrial Enterprises Contaminative Source Based on SuperMap GIS Influence of Decrease in Water Saturation of Host Rocks with Dehydration Reactions on the Reconstruction of the Thermal Evolution of Igneous-Intrusion-Bearing Basins Edaphic Characterization, Water and Salt Translocation in Saline Marsh at Local Scale in Songnein Plain, Northeast China Empirical Study on Efficiency Evaluation of Low-Carbon Economy Transition in Resource-Based Cities Ultrasound Frequency Impacts on the Removal of Indigenous Blue-Green Algae Taken from Lake Taihu Investigation of Atmospheric Mercury Pollution in Guilin Land Use Patterns Effect on Soil Anti-Erodibility in Low Mountain-Hilly Region A Study Method of Ecological Risk Evaluation for Reclaimed Water Analyses of Impacts of China's CO2 Emissions Factors Based on STIRPAT Model Experimental Study on Secondary Effluent Disinfection with Ultrasound and Chlorine Life Cycle Assessment on Resourceful Utilization System of Flue Gas Desulfurization and Denitration with Pyrolusite Slurry Dried Municiple Sewage Sludge Gasification Experiment in Dual Fluidized Bed The Measures of Mine Environment Protection and Control in Qinyang, Henan Province The Research on Effect Factors of the Polymer Flooding in Low Permeability Reservoir of Daqing Oilfield Chapter 14: Nanomaterials and Nanomanufacturing Experimental Study of Magnetism Dependence on the Grain Size in some Ferreous Magnetic Nanoparticles Silver-Coated Zinc Oxide Antibacterial Nanocomposite Preparation and Characterization Preparation of Nickel Sulfide Thin Films and Nanocrystallites Using Nickel Furfuraldehyde Thiosemicarbazone as Single-Source Precursor Effect of Hydration-Dehydration Activation on the Basic Strength of Nano Structured Alkaline Earth Metal Calcium Oxide Calculation of Fundamental Mechanical Properties of Single Walled Carbon Nanotube Using Non-Local Elasticity Effect of Nano-Silica on Flexural Properties of Epoxy Resin Rheological and Thermal Behaviour of High Impact Polystyrene Nanocomposite PVA/Kaolinite Nanocomposite Hydrogels: Preparation Method and Characterization An Investigation toward the Nano-Crystallization of Fe55Cr18Mo7B16C4 Bulk Amorphous Alloy Interactions between E18 Rat Hippocampal Neurons and Au-Nanowire Arrays Chapter 15: Coatings and Surface Engineering A Theoretical Investigation on the Capillary Model of Lubricant Penetration Experimental Study of Failure Performances of 51306-Coated Bearings under Lubricant Interruption Condition Wellbore Stability Analysis of Coal Seam Based on Hoek-Brown Criterion Design of Methane Polymerization Reactor Temperature Monitoring System Finite Element Analysis on Stress and Strain of Nickel Electroless Plated Fiber Bragg Grating Numerical Simulation of Multi-Pass Welding Distortion in Membrane Water-Wall Research and Realization of Heating Furnace Temperature Control System Based on PIDNN Primary Study on Overtopping Erosion of Non-Viscous Embankment and Assessment of Discharge through Breach The Formation Process of Transition Layer of Steel Wire Hot-Dipped Galfan by Sendzimir Process A Novel Thermal Insulation, Sound Absorption and Decoration Material Properties of Iron Tailing Coatings on Stainless Steel Substrate Erosion-Behaviors of the Steel Structure Coating Eroded at Low Erosion-Angle in Sandstorm Environment Comparison on the Adsorption Thermodynamics of Three Typical Petroleum Hydrocarbons in the Single and Mixed Solution on Aquifer Media Bioactive Coating on Stainless Steel 316 L through Sol-Gel Method The Effect of Protective Coatings on the Oxidation Behavior of 6061Al/SiC Composite at High Temperatures Improvement of Surface Roughness of Al-Si Alloy Cast Strip by Vertical Melt Drag Process Chapter 16: Biomedical Manufacturing A Numerical Study on the Characteristics of How Heat and Cooling Transfer on the Leading Edge of a Film-Cooling Blade Removal of Neutral Red from Aqueous Solution by Pretreated Penicillium Sp Research on the Mechanical Properties for Medical Stainless Steel Design and Construction of a Yeast Gene Bayesian Regulatory Network Research on Conditions of Producing Cellulose by Mixed Fermentation for Bioethanol Experimental Study of Biological H2S Removal in Biogas The Research on Dissolving Properties of Biodegradable Cellulose Pulp Predict Interactions between Protein Residues for Developing Antibody Therapeutics Experimental Study on Enhanced Denitrification of Microbial and Steel Fuel Cell New Type of Distributed Biomass Combustion Device Necessity and Feasibility in China Effects of Indigenous and Exogenous Microbial Inocula on Dynamic Changes of Enzyme Activities during Composting in a Bioreactor Measurements of Final Volatiles Yield of Biomass Devolatization at Flash Heating Rate Affect of Assimilable Organic Carbon (AOC) and Phosphorus to Heterotrophic Microbial Growth in Drinking Water Distribution System Utilization Biomass from Bagasse Ash for Phillipsite Zeolite Synthesis A Critical Analysis on Efficacy of Clinical Decision Support Systems in Health Care Domain Marginal Adaptation of Cast Metallic Dental Crowns Using Microplasma Welding Procedures Visual Evaluation of Cast Dental Alloys Welds Discontinuities in the Field of Fixed Prosthodontics Fabrication and Characterization of Injectable Biomaterials for Biomedical Applications Chapter 17: Manufacturing Process Planning and Scheduling Manufacturing of Multifunctional Nanocrystalline ZnO Thin Films Faults Evaluation Method Based Fuzzy Theory in Distribution System Research on Photovoltaic Grid-Connected Generation System The Research and Development of NTC Automatic Tool Selection Based on Aucol Study on the Power Control Method of a Stand-Alone Wind Energy System Based on DSEG The Design of the Supervisory System Based on the SOPC Parallel Best Neighborhood Matching Algorithm on PC Cluter Platform Research of Roll-Isolated Gimbal Platform and a Two-Position Initial Alignment Scheme of SINS in Spinning Projectile Power-Fail Detection and Data Storage Design for Control System A PSO Weighted Estimating the Mean Downstream Demand to Mitigate the Bullwhip Effect in a Supply Chain Rough Sets Based Simplified Analysis of Energy Loss Indicators in Power Plant Modeling of Fuel Supply for Ethanol-Gasoline Engine Based on Fuzzy PID Control Cooperative Area Coverage Reconnaissance Method for Multi-UAV System A Research on Ultrasonic Range Finder Based on Encoding Technology The Control Strategy Of V2G Participating in Peak Regulation in Power System Geometric Distortion Correction of Geothermal Field Hyperspectral Remote Sensing Images in Lintong, Shanxi The Case Study for Diversity in Nuclear Plant Instrument and Control System Adaptive Full State Hybrid Function Projective Lag Synchronization in Chaotic Continuous-Time System Canal Reach Deformation Monitoring Technology Based on Terrestrial LIDAR Scanning Technology Applying Skill Technology to Aid Cadence Allegro Part Management Research on Fuzzy Control System of the Water Level for Steam Generator Feedback Synchronization of Uncertain Chen Chaotic System The Multi-Humiture Monitoring System for General Storehouses Transient Model of Short Circuit Fault on Subway Traction Power Supply System Vibration Characteristic Analysis of Hoist Cage Excited by Steelwork Defects SINS Installation Error Calibration Based on Multi-Position Combinations Investigation of G4-73 Centrifugal Fan Airfoil Stall Characteristics Hand Flat Knitting Machine Speech Counter System Design - Based on Single-Chip Microcomputer The Leak Detection System of Air-Conditioning Pipeline Based on LabVIEW Traffic Engineering for Provisioning Hose Model VPNs with Delay Requirements Automatic Control System for the Process Parameters of the Soakage Agent in Glass Fiber Production Numerical Simulation Study on BF Raceway Attitude Control of Spacecraft Multibody System by Optimal Nonholonomic Motion Planning Wireless Monitoring System for Mechanical Equipment Based on Multi-Agent Technology Automatic Body Control Model Experimental Platform Design Based on CAN-Bus The Study on Optimal Location of Mine Materials Distribution Center with GPS Study on Reliability Analysis of Distributed Control System of Nuclear Power Plant Research on the Whole Process Cost Control Methods of the Chemical Piping Engineering Research on the Digital Design and Manufacture Technology in the Manufacturing of Titanium Alloy Cranial Prosthesis Construct an INLP Mathematical Model to Solve the Two-Sided Assembly Line Balancing Problem of Type-3 Development of the Full-Digital High Voltage Power Supply for Electronic Beam Welder The Application of Classification and Regression Trees Algorithm in the Production Data of Mounter Scheduling the CAN Bus with Rate Monotonic Techniques The Measurement and Process of Aeroengine Inlet Total Pressure Field A Study on Double-Stage Fuzzy Control of Drum Level in Waste Heat Boiler Implementation and Application of Mapping between IEC61400-25 of Wind Farm and Web Services Individual Pitch Regulation for Wind Turbine Simulation of Internal Arcing in High Voltage Switchgear Based on Fluent Modeling and Control of a Flexible Input Boost Chopper Linked to AC Drive System An Intelligent Monitoring System for Agriculture Based on Zigbee Wireless Sensor Networks Accurate Detecting Method for Fractional Harmonic A Nonlinear Compensation Approach for the Iron-Core Coils Based Electronic Current Transformers A New Practical Fault Location Algorithm for Two-Terminal Transmission Lines Control Limitations on Static Unstable Airframe Using Two-Loop Acceleration Autopilot Distributed Control System of Line Reactive Power Optimization for Rural Power Network Based on Improved TS Algorithm A Frequency-Domain Identification Algorithm for MIMO Fractional Order Systems with Time-Delay in State Control of a Fractional-Order Arneodo System Similarity Laws of Distorted Model with a Movable Bed and its Validity A Novel Speed Sensorless Control of Brushless DC Motor in Position Servo System Crane Mechanics Crack Growth Life Analysis Method Research Based SIF Amplitude Fitting Remote Video Monitoring and Controling System Based on Web Services The Research of MAC Protocol Based on Fire System for Wireless Sensor Networks Dynamic Inversion Guidance Law for a Hypersonic Vehicle An Ultra-Wideband Antenna for Mobile Handset Applications Neural Network with High-Dimension Multi-Input Layers Based on Production Control and its Application Research on Numerical Simulation of Gas Storage Field in Aquifer Based on Fully Implicit Method Electrical Energy Saving Based on Production Process Optimization for Steel Enterprise Processing Load Signal on Wheel Loader Transmission Research and Development of a Test Platform for Synthetic Performance Parameters of Linear Motors The Development of Monitoring System in Breeding Center Based on Wireless Sensor Net A New Landslide Forecast Method and its Application in an Opencast Coal Mine Progresses on Production Techniques of Gas Hydrate Slurry Study on Upgrading and Further Usage of Glycerol from Waste Water A Comparison of Rotational Speed of Marine Current Power-Generation Turbine with and without a Speeding-up Inlet Preparation of FeO Nanofluid and its Enhancing Mass Transfer Performance Data Envelopment Analysis and Malmquist Productivity Index for Measuring Group Performance on Interval Data Fuzzy Available-to-Promise System Modelling under Supplier Uncertainty The Analysis of Natural Characteristics of Pipeline Structure Systems Based on Frequency-Domain Transfer Matrix Method Study on the Repair Methods Responding to Disturbance during Production Scheduling The Position and Role of MES in the CSG Information System Mature Using and Innovation of Economic Management in Material Flow Hybrid Iterative Local Search Heuristic with a Multiple Criteria Approach for the Vehicle Routing Problem Total Productive Maintenance - Accelerating OEE in a Manufacturing Industry Leveraging Pervasive Technologies Effect of Cutting Fluid Supply Strategies on Surface Finish of Turned Parts Research on the Safety Evaluation Method of Railway Operation System A Review of Metaheuristic-Based Product Concept Generation Systems Research and Realization for the System of Coal Mine Ventilation System Hybrid Method for Solving Flexible Open Shop Scheduling Problem with Simulated Annealing Algorithm and Multi-Agent Approach Tackling Means for Balancing the Production Lines Control of Crisis Environments by the Use of WSN Structures and Based on Expert-SOA Architecture An Analytical Approach to Ring Rolling Using Modified Slab Analysis Fundamental Necessities of Knowledge Management in Project Based Firms Failure Prevention on Application of Flexible Printed Circuits The Impact of Using Data Warehouse on Manpower Employment Decision Support System Web Application for Virtual-Making of Cost Domain in Process of Civil-Project E-Management by Suggestive Algorithms Chapter 18: Joining Processes Parametric Optimization of TIG Welding on 316L Austenitic Stainless Steel by Grey-Based Taguchi Method Investigations on Fume Formation Rate in Shielded Metal Arc Welding Process Using Different Electrodes Corrosion Behaviour of Electron Beam Welded AISI 304 and AISI 4140 Influence of Intermetallics Modification by Melt-Shearing Treatment on Mechanical Properties of Iron-Containing Al-Si-Mg Casting Alloy Hot Corrosion Studies on GTA Welded AISI 304, Monel 400 Subjected to Air Oxidation and Molten Salt Environment Development of Defect Free Monel 400 Welds for Marine Application Effect of Electrode Coatings on Diffusible Hydrogen Content, Hardness and Microstructures of the Ferritic Heat Affected Zones in Bimetallic Welds Design and Simulation of Infrared Absorption Based on Hydrogenated Amorphous Silicon Thin Film Modeling and Simulation of a Vehicle Equipped with Power Split Automatic Transmission Chapter 19: Modeling, Analysis and Simulation of Manufacturing Processes II Multi-Objective Optimization Analysis of Motor Cooling System in Articulated Dump Truck Reactive Power Optimization Based on Improved Particle Swarm Optimization Algorithm Considering Voltage Quality Thermal Analysis and Test for a High Speed PM Machine for Fan Application A Load Shedding Scheme for Long Term Voltage Stability Enhancement by Multi-Stage Model Predictive Control The Design of Data Transmission for New Intelligent Layered Water Injection Regulating and Testing System Vibration Reducing Analysis of Beam String Structure with Seismic Isolation Bearings Noise Reduction Using Wavelet Transform in Ultrasonic Flaw Detection of Small-Diameter Steel Pipe with Thick Wall Analysis and Optimization Design of Self Magnetic-Suspension Permanent Magnet Linear Synchronous Motor An Improved Particle Swarm Optimization Approach for Temperature Control in HVAC for the Purpose of Energy Saving Analysis of Precision Reliability for CX Series of Five-Axis Turning-Milling Center Orthogonal Experimental Design Applied in Analyzing Factors Influencing on Heat Transfer Performance of Engine Cylinder Head The Turbine Machine Fault Prediction Based on Kernel Principal Component Analysis Research on SSO Caused by HVDC Based on Eigenvalue Analysis Vehicle Model Recognition Based on Fuzzy Pattern Recognition Method Structure and Finite Element Analysis for a Permanent Magnet Bias Axial Magnetic Bearing Glare Prediction Method Based on SPEOS Simulation for Civil Airplane Flight Deck Automatic Position Dependent Simulation for Robust Smart Grid Analysis and Research on Optimization of Multi-Threading Load Balance under Multi-Core Architecture Based on OpenMP Study on Dynamical Modeling of the Rolling Mill Vertical System Development and Realization of Air Flow On-Line Monitoring System in Utility Boiler Based on AC Induction Distributed Contact Model for Indeterminate Grasp Force Analysis towards Heavy-Duty Manipulation Numerical Simulation of Low-Current Vacuum Arc Plasma Research on the Energy Efficiency Test System of the Induction Motor Skew and End-Teeth Optimization in Reduce Permanent-Magnet Linear Synchronous Motor Normal Force Fluctuation Precision Analysis of Simulation Systems with Hardware-in-Loop Caused by Performance of Three-Axis Virtual Flight Motion Simulator Calculation and Analysis of Electrical Field in Valve Side Winding of Converter Transformer Chapter 20: Metrology and Measurement The Theoretical Study and Error Analysis about On-Site Calibrating Technology of Low-Voltage Metering Device Composition Error Torque Ripple Reduction of Brushless DC Servo Motor Using Full EMF Feedback A Technology of Composite Real-Time Image Processing of Profile Measurement Applied Research on the Electric Wet Effect in Optical System Design Influence of Pulsed Power Equipment's Driving Manners on Launching Process of the Electromagnetic Coil Online Calculation Method of Boiler Efficiency by Oxygen Measured at a Wet Basis Study on Automatic Test of the High-Precision I/F Converter The Research of Data Acquisition System about Flow Test in down Hole Numerical Analysis of Minicar Radiator Flow Resistance Wet Gas Flow Metering Based on Differential Pressure and BSS Techniques Research on Online Monitoring of Gear Fault of Wind Power Gearbox Based on Undecimated Wavelet Transformation A Stator Flux Estimation Method Based on Duty Cycles of Inverter Switching Acanthopanax senticosus Harms Intelligence Quality Assessment Based on Core Data Fractal Analysis of Soil Profile Roughness Research on the Electronic Strain Piezo Gauge Based on the Shell Experimental Investigation on Air-Solid Two-Phase Mixture Discharge under AC Voltage High-Accuracy Fundamental Frequency Detection in Power System The Design of Microwave Cavity Resonator Used for Measuring the Moisture Content in Plant Leaves Software Development and Data Processing of Tool Wear Based on Mapping Measurement Integration of Neural Network and Symbolic Inference and its Application to Detection of Foundation Piles A Traffic Flow Detection Algorithm in the Intersection Electronic Police System Based on Video Measurement Technology Research on Target and Projectiles' Miss Distance Based on Digital Image Processing Prediction Method of Coal Fracture Based on Failure Approach Index and Hoek-Brown Criterion An Ice-Detecting and Ice-Melting System of Electricity-Transmitting Lines Based on ZigBee Wireless Communication Fault Diagnosis Method in Controlled Rectifier Based on Support Vector Machines Temperature and Humidity Measurement System for Grain Storage Based on nRF905 Measurement Research on Magnetic Properties of Electrical Steel Sheet under DC Bias Conditions The Short-Term Load Forecasting Based on Rough Set Fast Motion Estimation Algorithm Based on Real Time Monitoring Measurement and Analysis on Power Quality of Electric Railway Traction Substation Based on LabVIEW Development of a Capacitive Displacement Sensor Based Portable Instrument with Digital Display for Measuring Weld Stagger Joint A Fault Diagnosis Method Based on Improved Grey Correlation Grade for Turbine Generator Unit Hand-Eye Calibration of a Robot-Based Inspection System Asynchronous Motor Bearing Fault Detection Methods Actual Motion of 3-DOF Parallel Robot Influence of V/Hz Limiter on Generator in Isolated Operation Study on Cable-Stayed Bridge Flutter Active Control by a Single ADM Numerical Improvements to Closed-Loop Ascent Guidance Twelve-Position Calibrating Method without North Using for Three-Axis Magnetic Sensor Study on SRUKF Applied in Initial Alignment with Large Misalignment Angle on Stationary Base of SINS Fault Monitoring of Transformer Based on FTIR Study on Generation of Digital Micro-Fluids Based on Surface Acoustic Wave The Generation of Droplets with Micro-Liter Volume Using Surface Acoustic Wave Low Bit Rate Speech Coding Using Lattice Vector Quantization and Time-Scale Modification Two-Dimensional Body Untouched Measurement System Research and Developing-Based on Sunplus SPCE3200 The Design of DC Motor Excitation Regulation System Based on DSP A Simulation Software of Critical Sour Well Blowout Based on FLUENT Research of Precision Injection Control System Based on the on-Line Measurement of Polymer Melt Density Based on Time Series Prediction of Photovoltaic Power Plant Output Study on Piezoelectric CeramicType Insole Plantar Pressure Measurement System Based on Test Point Research on the Type of Electrical Contact at Metal-Insulator Interface Wavelet Analysis of Natural Annual Runoff in Dongjiang River Design of Ultrasonic Gas Temperature Measurement System with Humidity Self-Correction Measuring the Shielding Effectiveness of Small Enclosures Fuzzy Controller Design Used for Steel Length Measurement Development of a 3D Vision Coordinates Measurement System Using Planar Target An Instantaneous Measurement Based Transformer Protection Scheme A Robust Feature Points Matching Algorithm in 3D Optical Measuring System Fault Position Identification for Series Compensated Lines with SSSC Based on Improved Wavelet Packet Entropy A Novel Four-Step Commutation for Bidirectional Switch Cells of AC-AC Matrix Converter Design and Experimental Analysis of Novel Refractometer Based on Photoelectric Sensor Technology Optimal Level Flight Trajectories of Stratospheric Airship Research on Fiber Bragg Grating Sensor Monitoring Method for Dynamical Stress of Centrifugal Blower Vane Finite Element Analysis of Magnetic Field Modulation Effect of Brushless Doubly Fed Machine Magnetic Levitation Permanent Magnet Linear Synchronous Motor Electromagnetic Analysis Meshing Theory of New Epicycloids Gear Drive Maximum Adhesion Control of Railway Based on Sliding Mode Control System Three Parametric Model Third-Order Software Phase-Locked Loop and its Application in Range Measuring System A New Real-Time Gas Well Productivity Evaluating Method Estimating the Threading Dislocation Density of Thick GaN Films Analysis of Ramp Estimation Algorithms in Automatic Transmission Transient Combustion and Hydrocarbon Emission Characteristics of a Port-Fuel-Injected Engine Field Analysis of Ridged Waveguides USING TRANSFER MATRIX The Software Design of a Gas-Liquid Separation and Metering System Acquirement of Melon Morphologies through High-Precision and Non-Destructive Vision Measurement Study of Wireless Torque Measurement System Based on CC2500 Soot Mass Flow Measurement System Using Triboelectricity and Ultrasonic A New Method to Measure the Transmittance of Filter Vibration Signal De-Noised by Alteration Wavelet Transform under Alpha Stable Distribution Environment Reliability Evaluation of Electromagnetic Flowmeter Based on Entropy Weight and Fuzzy Theory Traveling Wave Current Polarity Comparison Protection Using Wavelet Modulus Maxima for HVDC Transmission Lines The Correlation between MSCT for Lung Volume and Airway Measurements and Pulmonary Function Test System for Detecting the Defects of Steel Tubes Based on Electromagnetic Acoustic Technology Wind-Driven Natural Ventilation in an Areaway-Attached Basement with a Single-Sided Opening for Residential Purposes A Soil Sampling Method Based on Field Measurements, Remote Sensing Images and Kriging Technique Study on the Measurement Method of Soil Surface Roughness Design of a Hybrid Adaptive CMAC Tracking Control for a Class of Uncertain Chaotic Systems with only Output Measurement Analysis of Drinks Base Concentration Using Microprocessor Based Sensor An Innovative Drive Train Design for Improved Dead Reckoning Accuracy in Automated Guided Vehicles Computational Models for the Static and Dynamic Analyses of Laminated Composite Plates Buckling Analysis of Functionally Graded Super Elliptical Plate Using Pb-2 Ritz Method A Study of the Vehicle Structure Crashworthiness in Dolly and Curb-Trip Rollover Tests A Comparative Study on Vortex Transmitter versus Differential Pressure Transmitter for Flow Control Developing Uniaxial Tensile Test as an Alternate Method for Thermo Mechanical Process Evaluation Experimental Test of Magneto-Rheological Directional Control Valve From Topological Views Observe Collision Phenomenon in F1 The Use of Mixture of Piper Betle and Green Tea as a Green Corrosion Inhibitor for API X-52 Steel in Aerated 3.5 % NaCl Solution at Various Rotation Rates Thermal Comfort Assessment in a Closed Air Conditioned ICT Laboratory at Ungku Omar Polytechnic, Malaysia A Study on the Effect of Different Median Barrier Shapes in Presence of Single or Parallel Noise Screens Chapter 21: Nontraditional Manufacturing Dynamic Topology Optimization for ATP Hanging Beam of EMU Bogie Based on Hyperworks Multi-Sensors Information Fusion Based on Momentis Method and Euclid Distance Detoxification of Wheat Straw Formic Acid Hydrolysis and Xylitol Production Image Calibration and Correction for a Fisheye Lens Mixed-Oxide Sorbent for Moderate-Temperature Removal of Carbonyl Sulfide Research on Electric Linear Compressor for New Energy Vehicles Whole Transfer Matrix Method for the Critical Speeds of Skew Gear Transmission System Research of Replica Management Technology of Resource on Manufacturing Grid Design of Building Heating Supply Energy-Saving Control System Based on Information Fusion Research on Anti-Felting Finishing Process of Wool Knitted Fabric with Protease Comparison of the Computing Method for the Radial Temperature Difference of a Supercharged Boiler Steam Drum Shell Based on the Approximate Solution and the Current Chinese Standard The Study on Ergonomics-Based Design of Flood Survival Kit Dye-Sensitized Solar Cells Based on Novel Mixed Dyes Soft Magnetic Composite Switched Reluctance Generator - Fabrication and Analysis Fabricating Anodic Aluminum Oxide by Anodic-Oxidation Chapter 22: Computer-Aided Engineering in Manufacturing Permanent Magnet Biased Bearing of Suspension System Heat Exchanger Optimization Analysis of Aircraft Environmental Control System The Excitation Controller for A Synchronous Generator Based on Nonlinear Optimal Control RLV Attitude Control System Design in Reentry Flight Phase An Experimental Investigation of Flow Characteristics Downstream of Discrete Film Cooling Holes on Turbine Blade Leading Edge Research on Rotation Vector Algorithm in Untypical Conic Motion Design of Three-Dimensional Wireless Power Receiving Coil for MEMS Design of Control System Based on PLC for Polycrystalline Silicon Decomposition Furnace Realization of Active Vibration Control on Piezoelectric Intelligent Flexible Beam A Design of TRT Hydraulic Servo Controller Based on DSP Field Test and Numerical Simulation of Cracks in the Box Girder of Long-Span RPC Bridges A Novel Speed-Sensorless Suspension Decoupling Control Strategy for Bearingless Motor Based on Linear Extended State Observer Study on B/S-Based Remote Fault Diagnosis System of Radar Equipment Turn Rate Estimation Based Adaptive IMM Algorithm for Maneuvering Target Tracking Modeling and Simulation of Helicopter Cabin Electromagnetic Environment Tubular Permanent Magnet Linear Synchronous Motor Thrust Fluctuation Optimization Kalman Filter-Based Orbit Determination with Dynamic Model Compensation for a Maneuvered GEO Satellite A Vibration and Movement Coupled Modeling Approach of 3 DOF Flexible Joint Manipulators Tubular Permanent Magnet Linear Synchronous Motor Thrust Optimization Multi-EKF Localization Algorithm for Multi-Robots Formation Navigation Wind Speed Prediction Model Based on Radial Basis Functional Neural Network The Design of PLC SOC Controller by Dual-Core Mutually Exclusive Processor Investigation of Strength in G4-73 Type Centrifugal Fan Impeller Portable Intelligent Gas Monitor System Design - Based on Sunplus SPCE061A Finite Element Analysis of Drive Axle Housing Based on the Solid Element and the Shell Element Numerical Simulation of Covered Culvert at Jinan Section in South-to-North Water Diversion Project Control Simulation Study Based on Recurrent Generalized Congruence Neural Network On Current Situation and Development of our Industrial Automation Control Technology Cascaded Control Allocation in Overactuated Aircraft via Mixed Optimization Design and Research of a PMLSM-Driven Elevator Door Machine Pyramid Histograms of Orientated Gradients for Product Image Retrieval A Review of some Intelligent Optimization Algorithms Applied to Intelligent Transportation System Velocity Servo Design of Auto-Disturbance-Rejection Controller for Permanent-Magnet Synchronous Motor Servo System Based on Feedforward Compensation Controller Including Sliding Mode Simulation of a Regenerative Braking System Producing Controlled Braking Force Research on the Cutting Path Planning of Shearer Based on Expert System Particle Swarm Optimization with Team Spirit Inertia Weight Design of Intelligent Rehabilitation Crutch Based on Accelerometer Method of Controlling Inverted Pendulum Based on Fusing Genetic Algorithm and Neural Network Research on Error-Tolerant Model of Master Control Computer for Electronic Automation System Parameters Design of Main Circuit of AC Constant Voltage Power Supply Based on Dual Directional Reversible PWM Control CFD Simulation of Mixing Effects in Gas-Liquid-Solid Stirred Reactor The Research on Application of AT-DESIGN-Based Textile CAD/CAM System Optimal Orthogonal Design for Herringbone Wells Injection and Production Parameters of Steam Stimulation in Heavy Oil Reservoir A Nonlinear Controller for PMLSM Control System Based on Tracking Differentiator Sliding Mode Variable Structure Control Design for a Kind of Nonlinear Discrete Singular Uncertain Systems with Time-Delay An Integrated Design and Fabrication Approach for Heterogeneous Objects Compressed Sensing Recognition Algorithm for Sonar Image Based on Non-Negative Matrix Factorization and Adjacency Spectra Feature Research on Reactive Power Compensation Control System Based on Dual-CPU Mode Optimization Design of 355 Automatic Feed Mechanism Based on ADAMS Research and Implementation of Folding Machine Control System Based on MPU Optimization Problem of Maintenance Resources Allocation Based on Partical Swarm Optimization Simulated Programming Characteristics of Stacked-Gate Flash Memories with High-k Tunnel Dielectrics The UML Model for Access Management System of Intelligent Warehouse Based on RFID Chapter 23: Meso/Micro Manufacturing Equipment and Processes Characterisation of Microstructure, Mechanical Properties and Corrosion Behaviour on GTA Welded AISI 310 and Inconel 800 Grain Refinement through Warm Rolling of Wedge-Shaped Low Carbon Steel Design of S-Band Oscillators by Using GaAs ED02AH 0.2- m Technology The Effect of Magnesium to Sulfur Ratio on the Graphite Morphology of Graphite Cast Iron Produced at Differrent Section Thicknesses Microstructure and Toughness Properties of Subcritically, Intercritically and Supercritically Heat Affected Zones in X80 Microalloyed Pipeline Steel Fatigue Life Analysis of the Stabilizer Anti-Roll Bar Using ANSYS Research of Wind Power into the Grid Based on Large-Capacity Parallel Converter Modules Investigation of a Plasma Jet Generated by High Voltage Discharge at Atmospheric Pressure The Research of Air Purification under Complex Electric Fields Design of Mining Portable Static Resistance Strain Gauge Based on ATmega16L Design of Smart Car Servosystem Based on Camera Probabilistic Harmonic Load Flow Calculation Containing Doubly Fed Induction Generator Fixed Frequency Hysteresis Control Based STATCOM Parameter Identification of PMSM Based on Windowed Least Square Algorithm Research on Control System of Gearless Permanent Magnet Synchronous Traction Elevator Analysis of Stator Resistance Effects in Carrier Signal Injection Based Sensorless Control of Permanent Magnet Synchronous Machine Study of Direct Torque Control Technique on High-Capacity Motor Drives Second Order Sliding Mode Control of Direct-Drive Ring Permanent Magnet Torque Motor Fuzzy Adaptive Control of Airborne Electro-Optical Tracking Systems Based on Variable Universe Series Charge-Discharge Management for LiMn2O4 Power Batteries Wireless Power Transfer Systems via Strong Coupled Magnetic Resonances - Design, PCB Implementation and Tests The Maintenance Strategy of Electric Equipments Based on the Least Average Annual Cost Improved Structural Design and Digital Control System for Micro-Machined Tuning Fork Gyroscope The Design of the Detonator Wick Resistance Auto-Stripping Detector Application of Thyristor AC Voltage Regulation Technology in ICP Spectrum Excitation Source Application of Genetic Algorithm Based on Real Number Encoding to Optimization Design for Rolling Schedule of Tandem Cold Rolling A Fridge Compressor Control System Based on MC56F8013 Compound Speed Control of Ultrasonic Motor Using Two Variables Experimental Study on the Effect of Gas Composition Variation on Engine Emissions Performance Analysis for Elliptical Tube Longitudinal Vortex Generators Characteristic Analysis of Ceiling Radiant Heating of Capillary Tube Study of the Pressure Distribution between the Piston Rings in Reciprocating Compressors Preparation and Application on High-Efficiency Catalyst for Catalytic Wet Oxidation An Approach for the Numerical Computation of the Reduction of the Original Porosity due to Diagenetic and Compaction Processes in Sandstone Reserviors Influence of Packing form on Performance of Electrodeionization Process for Removal Ni2+ from Synthetic Wastewater Design of a Portable Solar Photovoltaic-Driven Refrigerator Study of Gasoline Engine Waste Heat Recovery by Organic Rankine Cycle Stability Analysis of Single-Track Railway Long Span Combination Bridge of Arch and Beam Effects of Spark Advance Angle on Combustion and Emission Characteristics of a Compressed Natural Gas Engine Removal of Trivalent Chromium ION in Wastewater by Zeolite 4a The Technique of NOx Emission Control in 1000 MW Thermal Power Unit Boilers Comparative Study on Schemes of Seismic Response Reduction for the Railway Extradosed Cable-Stayed Bridge Pure Working Fluid Selection for the Organic Rankine Cycle in Waste Heat Recovery of Diesel Engine Effects of Engine Operating Parameters on Lean Combustion Limit of Hydrogen Enhanced Natural Gas Engine Heat Sink Matching for Thermoelectric Generator Experimental Study on the Start Process for Compressed Natural Gas Engine Experimental Study of Cooling Tower Packing and Deduce the New Formula of the NTU Study on Preparation of Super Clean Coal with Selective Flocculation-Flotation Technology on Taixi Anthracite Study on Mechanism of Action of Catalysts on Liquefaction of Bagasse Alkali Lignin Study on Propylene Recovery in a Dispersed Absorption System-(Water-in-Oil) Emulsion System Design of a High Performance IMP Motor for Machine Tool Applications The Research of China Solar Water Heater Industry Emission Performance of a Diesel Engine with Pressure-Wave Supercharger Stability Analysis of Water-Based Nanofluids Prepared by Using Supersonic Dispersion Method The Location Effecting of the Braces to the Lateral Displace of the Steel Frame Using the Time History Analytical Method Pressure Forecast of an Air-Cooled Steam Condenser under Wind Speeds Development and Research on a Hermetic Horizontal Oil-Injected Scroll Compressor for Recovering Casing Gas Experimental Research on Improvement of the Heat Pump Air-Conditioner and Hot Water System Experimental Study on Degradable Organic Wastes by Catalytic Hydrothermal Degradation Research on the Flow Character of Regenerative Heating Furnace Affected by the Switching Model Control Techniques for Uni-Axial Continuous Laser Fabrication Chapter 24: Laser Based Manufacturing Laser Welding Simulations of Stainless Steel Joints Using Finite Element Analysis Effect of Peclet Number on the Thermo Capillary Convection and Molten Pool Shape Formation during Laser Welding Using CFD Heuristic Model for Dynamic Single Machine Group Scheduling in Laser Cutting Job Shop to Minimize the Makespan Functional Testing of Direct Metal Laser Sintered (DMLS) Components for Automotive Application An Investigation on the Effect of Pulsed Nd:YAG Laser Welding Parameters of Stainless Steel 1.4418 Evolution of Direct Selective Laser Sintering of Metals Effect of Defocusing on Bead-on-Plate of Ti6Al4V by Yb:YAG Disk Laser Investigation on Porosity Content in 2024 Aluminum Alloy Welding by Yb:YAG Disk Laser Germanium-Silicon Quantum Dots Produced by Pulsed Laser Deposition for Photovoltaic Applications Laser Scanner Stage Synchronization Method for Ultrafast and Wide Area Fabrication Optical Power Optimization of the Single Mode Vertical Cavity Surface Emitting Lasers by Two Oxide Layers Growth and Characterization of ZnO Thin Films Grown by Pulsed Laser Deposition XPS Analysis of ZnO Thin Films Obtained by Pulsed Laser Deposition Semiconductor Lasers Based on the Orthogonal Dual Gloss Meter Three-Photon Excitation Fluorescence Lifetime Imaging Using Time-Correlated Single Photon Counting Method Research on Laser Damage to IR Guidance Anti-Ship Missile Detectors The Analysis of Turntable Error and Arithmetic Design for North-Finder Based on Rate Biased RLG Laser Doppler Velocimetry Signal Processing Based on Spectral Refinement and Correction Planning Strategies for Surface Hardening by Laser Robot Single-Frequency Nd:YVO4 Green Laser Using Two Brewster Plate Chapter 25: Rapid Manufacturing Technologies Study on Influencing Factors of High-Temperature Rapid Molding Product on the Rehabilitation of Mold Cavity Nondestructive Testing Analysis of Reinforced Protective Cover Thickness Placement Sequence Methodology in Pallet Pattern Formation in Robotic Palletisation Design and Rapid Manufacturing Structural Components of a Mini-Scale Underwater Vehicle Integrated Multi-Robotic Assembly Planning for Improved Productivity Improving Equipment Effectiveness by Designing Optimal Production Process Chapter 26: Modeling, Analysis, and Simulation of Manufacturing Processes III The Electromagnetic Analysis of the Magnetic Bearing Using the Finite Element Method Numerical Simulation of Failure of Overburden in Coal Mining under Reservoir Feasibility for the Application of the Temperature Difference Computing Method Based on the Simplified Solution of the Radial Temperature for a Boiler Steam Drum Wall to a Supercharged Boiler Modification of Nano-Titanium Dioxide Film and Processing Experimental Study of Tannery Waste Water Study on Reliability of Structure with Energy Dissipation Dampers Application of AHP on the System of Flue Gas Desulfurization and Denitration with Pyrolusite Slurry Absorption of Sulphur Dioxide from Flue Gas with Sodium Alkali Solution in Packed Columns Design of the Liquid-Cooling System for High Power LED Modules Using Taguchi Analysis Hybrid Desiccant Cooling System Using Condensing Heat as the Regeneration Source. Part I: System Model Fractal Theory's Investigation in Pneumatic Flocculation Process Hybrid Desiccant Cooling System Using Condensing Heat as the Regeneration Source. Part II: Energy Saving Potential Experimental Study of Oil-Gas Cyclone Separator Performance in Oil-Injection Compressor System Study of Process Industries Strategic Environmental Assessment Matrix Model Methodology Based on the Decision-Making Integrated Simulation of EM Scattering from 3-D Target by MOM with Pulse Basis Function Electrically Induced Reduction of Trichloroethene in Water Numerical Simulation Research on Louver Fin in Air Conditioning for Cars Nonlinear Buckling Analysis of Wind Turbine Towers Thermal Performance Analysis for a New External Wall Insulation System Variable Step-Length Efficiency Optimum Control of Traveling Wave Ultrasonic Motor System Experiment and Simulation on Coarse Slime Recovery by Water Medium Fluidized Separator Research and Implementation of Intelligent Control of Energy Saving and Emission Reduction in Electric Bicycle The Simulation Research on the Performance of Chevron-Type Corrugated Plate Heat Exchanger Research on Structure Design and Performance Test of Electromagnetic Shielding Clothes The Pure Heat Conversion Coefficient Analysis Method for Thermodynamic System of Advance Boiling Water Reactor Nuclear Power Unit Study on the Response of Stud Shear Connectors Subjected to Different Loading Rate The Resource Characteristics of Marine Gas Hydrates and the Assessment of its Exploitation Technology Numerical Simulation of Air Distribution in the Series-Type Electrostatic Fabric Filter Precipitator Three-Dimensional Simulation of Gas-Solid Flow in the Biomass Circulating Fluidized Bed Gasifier's Riser The Influence of Arrangement of Gas-Fired Radiant Heaters on Energy Saving in Subway Coach Garages Experimental Study on Modified Model of Indoor Bio-Aerosol Dispersion Simulation and Optimization of Domestic Wastewater Nutrients Removal Process: Vfas as External Carbon Source The Optimization of Operation Characteristics for Finned Heat Pipe Radiator in Concentrating Photovoltaic System Modeling and Numerical Simulation of Dehumidifier Using LiCl Solution as the Liquid Desiccant Study on Simulation Model of Hydrothermal-Treatment of Degradable Organic Wastes Modeling and Simulation of Selective Catalytic Reduction for Flue Gas Denitration in Power Plants Research on Construction Safety Evaluation Based on Fuzzy-Set Pair Analysis Model The Numerical Simulation Analysis of Excavation Process of Loess Tunnel Performance-Based Seismic Design Approach for High Speed Railway Bridge CFD Simulation and Retrofit of Natural Ventilation in a Steel Workshop Analysis and Optimization of ORC for Low-Temperature Waste Heat Power Generation The Simulation Study on Buried Ground-Source Heat Pipe Transient Temperature Field Distribution Random Heat Temperature Field Model Analysis on Buried Pipe of Ground Source Heat Pump Design and Realization of Mine Water-Inrush Visualization Simulation System Model Test Research on the Pile Stress by Pseudo-Static Test of Pier-Foundation-Structure System Analyze on the Treatment Schemes and Effects of Dynamical Pressure Roadway in Coal Mine Dissolved Oxygen Convection and Diffusion Numerical Simulation of Water and Air Mixture Flow in Circular Pipe Numerical Simulation on Process of Flow and Heat Transfer in Upright Magnesium Reducing Furnace The Hysteretic Behavior of Fiber Beam Element Model of Reinforced Concrete for Dynamic Explicit Analysis Simulation of Flows Near a Groin in a Straight Open Channel with Effects of Streamline Curvature An Intelligent Process Model for Manufacturing System Optimization Neural Network Based Modeling in Wire Electric Discharge Machining of SiCp/6061 Aluminum Metal Matrix Composite Kinematic Modeling and Analysis of a Multifingered Robotic Hand Study of Effect of Geometry Parameters on Piezoelectric Cantilever by Modal and Harmonic Analysis Modeling and Optimization of Wire Electrical Discharge Machining of Cold-Work Steal 2601 An Optimization Model of Noise and Vibration in Passenger Car Cabin Numerical and Experimental Investigation of Inward Tube Electromagnetic Forming- Electromagnetic Study Modal Analysis of the Milling Machine Structure through FEM and Experimental Test Analysis of Finite Element and Finite Volume and Investigation of Effectual Parameters in Direct Extrusion Finite-Element Analysis of Heat Generation by Plasma in Welding Temperature Field of Stainless Steel A CAD/CAPP/CNC Integrated System Based on Lightweight 3D Model Prelimenary Study on Thermomechanical Modelling of Cutting Process Adaptive Aluminum Extrusion Die Design Using Case-Based Reasoning and Artificial Neural Networks Diesel Engine Maintenance System, Using Trend Analysis of Histroical Data (Case Study) Effective Variation Analysis Model for the Riveting Press Process of a Flush Rivet Calculation of Grinding Wheel Profile and 3D Simulation for Grinding Screw Rotor Flute Research on 3D Modelling and Forming Simulation of Metal Wire Misfits between Manufacturing Resource Planning (MRPII) System and Manufacturing Environment: A Misfit-Inviability Model Operational Framework for Manufacturing Resource Planning (MRPII) System Case Studies in Malaysian Small and Medium Enterprises a Taxonomy Model for Structural Misfit of MRPII System Artificial Neural Network Based Process Model for Arsenic Diffusion in Si1-xGex Alloys Computer Modeling of MWIR Homojunction Photodetector Based on Indium Antimonide Empirical Process Model for Arsenic Diffusion in Si1-x-yGexCy Alloys The Drying Process in Spray Drying and Creation Simulation Model Chapter 27: Semiconductor Materials Manufacturing Impact of Different Dose and Angle in HALO Structure for 45nm NMOS Device A Study on Improving in Natural Convection Heat Transfer for Heat Sink of High Power LEDs Design and Implementation of a Multi-Channel HDLC Protocol Controller Based on FPGA A Low Native Jitter Voltage Controlled Oscillator on 0.18 m CMOS Process Generation Shedding and Load Shedding Based on Transient Energy Margin Sensitivity Research on MEMS Phthalocyanine-Based Gas Sensor Research on Stator Winding Leakage Reactance Calculation of Double-Winding AC-DC Generator Design of Pythagorean Hodograph Curve Interpolator Based on NiosII Embedded Processor and FPGA Research of Waveguide-Stripline-Coaxial Line Direction Coupler The Design of Single Phase AC Regulated Power Supply with PWM Chopping Control Compensation H Control for PMLSM Suspension Platform Based on PDFF Vacuum Ball-Collector Effects of Spontaneous and Piezoelectric Polarization on Spontaneous Emission Rate of Blue LEDs on SiC Substrates High K / Metal Gate of Short-Channel SOI NMOSFET Research Novel Flowrate Sensor Based on a Couple of Fiber Bragg Gratings A LCD Touch Screen Controller Based on LPC2138 Research on Novel Structure of Diode Clamed Multilevel StatCom Multivariable Distrubance Observer Based Analytical Non-Interacting Control of Mineral Grinding Circuits Synchronization Control of Space Voltage Vector Controlled Multi-PMSM Based on Adjacent Cross-Coupling Research on Fault Diagnosis Based on AGA and LSSVM Study on DPC-SVM Rectifier Based on Power Feedforward PID Controll of Single Neuron for Switched Reluctance Motors Based on RBF Neural Network Simulation of Ultrashort Pulse Shaping Filter Based on Multilayer Volume Holographic Gratings Synchronous Controller of LED Video Displays and LED Lighting Compatible Embedded Data Acquisition System Based on LPC2290 and AD7715 Reliability Test and Evaluation Analysis of Silicon Pressure Sensor under Vibration Stress The Meso-Piezo-Capacitive Effect Effect of Nitrogen Doping on the Structure and Optical Properties of N-Type Hydrogenated Amorphous Silicon Thin Films An Improvement to Single-Phase RCD Based on MSP430 Memristor Oscillators and its FPGA Implementation The Study of Aeroengine Automatic Starting Logical Module Oriented towards Maintenance Training Calculation on Thermal Field of a Doubly-Fed Induction Generator with Axial-Radial Ventilation Cooling System Mechanism and Suspension Control Study for Spherical Reluctance Motor with Magnetic Levitation Based on CM6900 Resonance IC Controller SRC LED Lamp Driver Circuit Influence of Body Contact on the ESD Protection Performance in 0.35 m Partially-Depleted SOI Salicided CMOS Technology Simulation of Silicon Solar Cell Using PC1D Equivalent Circuit Model of Top-Emitting OLED for the Designing of OLED-on-Silicon Microdisplay The Industrial Research about China Solar PV Based on the Price of Polysilicon Correlation Analysis of Polycrystalline Silicon Industry and Photovoltaic Industry in China Iterative Learning Cross-Coupled Control for XY Table Based on Real-Time Contour Error Estimation Chapter 28: Precision Molding Processes Analysis and Experimental Validation of Performance of Z-Source Inverter-Fed Permanent Magnet Brushless DC Motor Drive Research of Fuzzy Direct Torque Control of Permanent Magnet Synchronous Motor Based on Simulink Active Disturbance Rejection Control with Self-Optimizing Control of Permanent Magnet Synchronous Motor Regulator Design of Vector Control System CMM Inspect Path Planning for Precision Convex Revolved Surfaces An Axial-Flux Hybrid Excitation Flux-Switching Machine Improvement of Passive Location Precision Using 'Beidou' Navigation System Variable-Gain Cross Coupling Control for Linear Motor X-Y Table Based on Genetic Algorithm Optimization of Micro-Milling Process with Genetic Algorithm Geometrical Error Analysis of Cold Forged AUV Propeller Blade Using Optical Measurement Method A Study on the Effect of V-Ring Position on the Die Roll Height in Fine Blanking for Special Automobile Seat Recliner Gear Influence of Ply Angle on Failure Response of Bolted Composite Joint The Factors Influenced to Surface Finish in Milling for Hardened Medium Carbon Steel: JIS S50C On the Mechanism of the Effect of the Cryogenic Treatment on High Speed Steels Research on Inorganic Material Modification of PVC Design and Development of a Rotary Airlock Valve for Using in Continuous Pyrolysis Process to Improve Performance Acrylic-Based 1x2 Plastic Optical Fiber Coupler Device Manufacturing Using EGX400 Desktop Engraver System The Application of Permanent Magnet Electric Machine on Electrical Wheelchair Chapter 29: Nanofabrication, Nanometrology and Applications Applications and Prospects of Hollow Micro/Nanospheres in Environmental Protection and New Energy A Design Methodology for Lithium-Ion Battery Management System and its Application to an Autonomous Underwater Vehicle Material Level Noise Measuring for Steel Ball Coal Mill Based on Energy Entropy of Wavelet Packet and Least Squares Support Vector A MEMS-Based Inertial Navigation System for Mobile Miniature Robots Design of Photon Counter in PCS Nano-Particle Size Analyzer The Performance Optimization Design of High Frequency and High Voltage Transformer of Electronic Beam Welder Application of Quantum-Behaved Particle Swarm Optimization in Engineering Constrained Optimization Problems Nanoimprint Lithography of Multistep Loading Influence of Surface and Interface Properties on the Electrical Conductivity of Silicon Nanomembranes Chapter 30: Automation, Mechatronics and Robotics The Design and Test of HEMP Simulator Based on Coaxial Peaking Technology Research on Multiple Bi-Directional DC/DC Converter in Wind Power Flow Optimization and Control System Based on Adams and Matlab Co-Simulation and Experimentation Research for Independent 4WD EV Research on Co-Evolutionary Genetic Algorithm of Long-Distance Gas Pipelines Optimal Model Economy Simulation of NN-Based MRAC for PMSM in AC Drive Mining Truck Based on Linear Quadratic Regulator Optimal Control of Single Inverted Pendulum System Co-Simulation of ADAMS and SIMULINK Modeling and Simulation Research on the Maintenance System of Armored Equipment The Simulation of New Arc Welding Power Based on Matlab Comparison of Photovoltaic Power Generation Interconnection Standards The Design of CAN Bus Intelligence Node Based on MCF52234 Study on Nonlinear Robust Control for Permanent Magnet Linear Servo System Speed Sensorless Control System of Mining Locomotive Drive Based on DSP A Novel Multi-Tooth Fault-Tolerant Flux-Switching Machine A Novel 12/10 Electrical Excitation Flux-Switching Machine Research of Engine Piston Pin Fatigue Analysis Based on UG The Study and Simulation of Pitch Control Servo System in Mega-Watt Class Wind Turbine Direct Torque Control of Bearingless Induction Motor Using Space Vector Pulse Width Modulation Based on Fuzzy Adaptive Control The Simulation Study for Auto Electrical Seat Controller Based on Fuzzy Control Technology Study on Simulation of Path Plan of Parallel Grinding for Wedge Aspheric Fuzzy Control of Automobile ECBS on Varying Pavement Fuzzy Controller Design for Multi-Legged Robot Development of Service Platform for Machine Tool Fixture Design and Manufacture The Modeling and Simulation of EGCS Based on Matlab/Simulink Simulation Study of Damage Identification Method Based on Lamb Wave Scattering in Aluminium Plate Modeling and Dynamic Characteristic of a Pneumatic Solenoid Valve Reentry Trajectory Optimization of Airbreathing Hypersonic Vehicles Based on Gauss Pseudospectral Method Analysis of Dual Stator-Winding Induction Generator Based on Ansoft Molecular Dynamics Simulation of the Rapid Solidification of Liquid Zinc Modeling and Simulation for Super Capacitor Braking Energy Recovery Process of Micro EV Application of Complex Method for Optimization of Isolated Heat Pipe Heat Exchange System Normalized Energy Stability Margin Based Analysis of Omni-Directional Static Walking of a Quadruped Robot on Rough Terrain Hot-State Numerical Simulation Study on Top-Blown Bath in ISA Furnace Finite Element Analysis of Fiber-Reinforced Iron-Boron Alloy Front Car Door Modal Analysis Based on Finite Element Method Switched Reluctance Motor Drive System Model and Simulation Based on ANSYS and SIMULINK Electromagnetic Force Modelling for Hybrid Magnetic Bearing Fuzzy Control and Simulation Studies of Hot Rolling H-Beam's Water Supply System Simulation of Permanent Magnet Synchronous Motor for Electric Vehicle Indirect-Torque Control System Low-Speed Turning Back Simulation and Evaluation of a Car Based on ADAMS Zero Internal Force Control for a Dual-Arm Space Robot The Influence on High-Speed Electrical Multiple Unit by Fluctuation of Traction Power System's Voltage Steering Wheel Angle Pulse Input Simulation and Evaluation of a Car Based on ADAMS Design of Photovoltaic Generation Monitoring System Based on WinCC A New Method of Fault Diagnosis with Soft Set Theory Design of Random Combination System Based on Five Common Kinds of Mechanical Transmission Modeling and Analysis of a Turbidostat Model with Monod-Type Kinetics and State Feedback Control Circuit Model of Laser-Triggered Surface Flashover Switch in Vacuum Condition with Pulsed Voltage Detection of Electromagnetic Pulse Induced Hazard on Electroexplosive Device Based on Optical-Fiber Fluorescence Risk Assessment Model of Automobile Defect Based on Weibull The Fuzzy Immune PID Control Based on the Water Position of the Steam Generator Electromagnetic Compatibility Analysis of Carbon Fiber Cabin Struck by Lightning in the Aircraft The Switched Control of Single Phase Active Power Filter Analysis and Experiment of the Eddy Current Losses for Canned Motor The Pole Width Modulation Method and Experiment on Reducing the Voltage Harmonic of PM Wind Generator A Path Planning Approach for Wedge/Aspheric Lens Element Grinding Based on Space Coordinate Transformation Study on the Safety Design and Test Method of Ultrasonic Cleaning Device for the Motor Winding Pressure Analysis of Hydraulic Pumping System of Concrete Pump Attitude Control of Rigid Body Using Sliding Mode Control Vision-Based Guidance for an Unmanned Aerial Vehicle Following a Moving Target An Empirical Model for a Variable Speed Refrigeration System The Variable Speed Direct Drive Permanent Magnet Synchronous Wind Power System Used on Matrix Converter An Improved Geomagnetic Matching Algorithm Using Rotation Angle Search Technique A Signal Quality Monitoring Based on Least-Squares for Global Navigation Satellite System An Improved Adaptive Kernel-Based Object Tracking Analysis and Discussion of the Influence Factors of the Wind Power Robust Tracking Control Based QFT and Pade Approximation for Flight Simulator Counting of Microscopic Cells Based on Grads Hough Transform Composition Analysis of Ge Graded Si1-xGex Alloy Films by Capacitance-Voltage Method Composition Analysis of Ge/Si1-xGex: C Buffer on Silicon Measured by Planar Scanning Energy Dispersive Spectroscopy Research on a Novel Power Inverter Control Strategy Based on Micro-Grid Research on Tension Control System of Filament Winding Machine The Dynamic Characteristics of AD590 Study on System Identification Method Based on PID Control Algorithm Based on the Nc Machining System Error Aspheric Analysis and Research A Computed Model of the Pendulum Test of the Leg for Quantitative Evaluation of Muscle Spasticity Application of Fuzzy Assessment Theory in Tower Crane Safety Expected Model for Time-Energy Trade-Off Problem of Product Disassembly The Characteristics of Calcium-Based Sorbent Burning Pore Structure and Simulation of Gas-Solid Mass Transfer in Vulcanization Synthesis and Photovoltaic Properties of Fluorene-Based Copolymers with Thiophene Heterocycle on the Side Chain Stress Problems at the Steam Drum Fatigue Checking Point of a Supercharged Boiler Numerical Simulation and Engineering Application of Bolt's Supporting in Tectonic Stress Field Research on Numerical Analysis of Landslide Cataclysm Mechanism Coal Mine Active Disturbance Rejection Decoupling Control for Aero-Engines Optimization and Application of Composite Index Method for Evaluation of Rock Burst Rating Filed Test Studies on Internal Force of Pile in Pile-Anchor Supporting System for Deep Foundation Pit Analysis of Condensing Temperature Set Point of Air-Cooled Refrigeration System with an Electronic Expansion Valve The Toxic Effects of Algicidal Bacteria L7's Algicidal Components to Brachydanio rerio Numerical Simulation of the Spray Characteristics in Small Scale Liquid Rocket Engine Combustion Chamber Experimental Study of Integrated Vortex Board with Exergy Analyses Development and Realization of Bag Filter On-Line Monitoring System Based on AC Charge Induction Application of Artificial Neural Network for Modeling of Mechanical Cooling Tower

by "Nielsen BookData"

Details

• NCID: BB0837987X
• ISBN:
  • 9783037852958
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 8 v.
• Size: 25 cm
• Parent Bibliography ID:
  • BA24926058