Chemical engineering material properties : selected, peer reviewed papers from the 2011 International Symposium on Chemical Engineering Material Properties (ISCEMP 2011), November 4-6, 2011, Shenyang, Liaoning, China
Author(s)
Bibliographic Information
Chemical engineering material properties : selected, peer reviewed papers from the 2011 International Symposium on Chemical Engineering Material Properties (ISCEMP 2011), November 4-6, 2011, Shenyang, Liaoning, China
(Advanced materials research, v. 391-392)
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
Available at 1 libraries
  Aomori
  Iwate
  Miyagi
  Akita
  Yamagata
  Fukushima
  Ibaraki
  Tochigi
  Gunma
  Saitama
  Chiba
  Tokyo
  Kanagawa
  Niigata
  Toyama
  Ishikawa
  Fukui
  Yamanashi
  Nagano
  Gifu
  Shizuoka
  Aichi
  Mie
  Shiga
  Kyoto
  Osaka
  Hyogo
  Nara
  Wakayama
  Tottori
  Shimane
  Okayama
  Hiroshima
  Yamaguchi
  Tokushima
  Kagawa
  Ehime
  Kochi
  Fukuoka
  Saga
  Nagasaki
  Kumamoto
  Oita
  Miyazaki
  Kagoshima
  Okinawa
  Korea
  China
  Thailand
  United Kingdom
  Germany
  Switzerland
  France
  Belgium
  Netherlands
  Sweden
  Norway
  United States of America
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 2011 International Symposium on Chemical Engineering and Material Properties (ISCEMP 2011) was a premier forum for the presentation of technological advances and research results in the fields of chemical engineering and material properties. ISCEMP 2011 brought together leading engineers and scientists, working in chemical engineering and material properties, from around the world. The present peer-reviewed papers were selected on the basis of originality, technical quality and research content.
Table of Contents
Preface and Organizing Committee
Chapter 1: Material Science
Hollow PtRu Nanospheres Catalyst Supported on Activated Carbon Fiber and Carbon Nanotubes for Methanol Electroxidation
Preparation, Performance and Analysis of Carbon Fibers with Dielectric Barrier Discharges Plasma Surface Treatment
Preparation and Properties of Carbon Nanotube / Polyaniline Nanocomposites
Hybrid Supercapacitors Based on Polyaniline and Carbon Aerogels Composite Electrode Materials
Synthesis and Electrochemical Performance of a Novel Nano-Sized Sn-Ni Alloy Composites for Lithium Batteries
Tribological Properties of Al-21Si-0.8Mg-1.5Cu-0.5Mn Alloys against Steel under Lubrication Conditions
Effect of La-Rich Misch Metal on Microstructure and Mechanical Properties of As-Extruded Mg-14Li-3Al Alloy
Theoretical Account for the Bimetallic Bonding of the Copper Clad Aluminum Wire by Clad-Drawing at Room Temperature
Study on Ni/Al Interface Diffusion at Initial Time by Using Molecular Dynamics Method
Optimization of Process Parameters of Hot-Dip Aluminized Coating
Surface Characteristics of Single Sisal Fiber and Interfacial Adhesion of Composites
Exploring the Reaction Heat Controlling and Engineering Scale Law in the Process to Synthesis PPTA Using Low-Temperature Solution Polycondensation
Experimental Research on Bonding Intensity of Iron Ores in the Sintering Process
Study of Ferrous Material Reduction Based on Thermal Reserve Zone of Modern Blast Furnace
The Influence of Iron Ore Quality Degradation on the Assimilability of Sinter Ore
Preparation of High Performance Polybenzoxazine Resin Using Hyperbranched Polyborate
Modes of Occurrence of Trace Elements (Na, K, Fe, Si) in Coal Used for COREX Process
Preparation and Optical Properties of CdS/PVK Nanocomposites Based on CdS Nanorod Arrays
Microstructure and Properties of 0.2mm Thick Sheet Titanium Alloy by Micro-Laser Welding
A Lattice Boltzmann Model of Calculating Mass Diffusivity in Nanofluids
A Simulation Analysis Method for Crack Resistance of Hydraulic Concrete Based on Temperature-Stress Test
Synthesis of Stereoregular Polylactide
Study on the Weakest Interaction Model for Chiral Resolution Using Molecularly Imprinted Polymer
Insulation Properties of the Monolithic and Flexible Aerogels Prepared at Ambient Pressure
Effect of Sr Addition on Microstructures of as-Cast Mg-5Sn-5Zn Alloy
Effect of Tide on Sewage Disposal by Bio-Film Process Dosing with Enzyme
Effect of Water Flow Pattern on the Treatment of Discharged Sewage by Biological Accelerator-Bio-Film Process
Effect of Sewage Load Shock on Channel Disposal by Bio-Film Process
Torque Rheological Properties of Bamboo Flour/PP Composites
Effect of Different Compatibilizing Agents on the Compatibility of Lignin/LDPE Composites
Properties Analysis of Organic Montmorillonite (OMMT) Reinforced RTV Composites
Influences of Rare-Earth Ions Doping on the Structure and Photocatalytic Activity of TiO2
Research on the Interfacial Tension between Anion Gemini Surfactant Solution and Crude Oil
Proportion Design of Autoclaved Cement Concrete Based on High Strength
Study on the Resistance Spot Microwelding Parameters of Copper and Nickel-Plated Steel Dissimilar Metals
Excess Gibbs Free Energies of Selected Binary Halogenated Silane Mixtures at 101.3KPa
Single Layer Graphene Oxide Sheets-Epoxy Nanocomposites with Greatly Improved Mechanical and Thermal Properties
Preparation of High-Performance Brick from Construction and Demolition Waste
Preparation and Properties of Microstructure Flexible Image Transfer Fiber Materials
Preparation of Flame-Retardant Asphalt for Tunnels
Strontium Modification of Biomaterial: The Effective Approach to Enhance the Bioactivity and Biocompatibility of Calcium Silicate
Preparation and Combustion Properties of Sepiolite/LDPE Composites
Synthesis of a Novel Intumescent Flame Retardant Oligomer and its Application in ABS Copolymer
Preparation and Thermal Properties of Novolac Resin/Graphite Nanosheet Composites
Influences of Hot Rolling Conditions on the Microstructure and Mechanical Properties of Low-Alloy Steel
Europium Doped Titania Nanocomposites with Enhanced Photocatalytic Activity towards the Degradation of Partially Hydrolysis Polyacrylamide
Synthesis and Luminescence Properties of Tris (8-Hydroxyquinoline) Iron Spindle-Like Structures at Room Temperature
The Influences of Lateral Confinement on Ballistic Performance of TiC-TiB2 Composites under the Impact of Long-Rod Kinetic-Energy Projectiles
Penetration Mechanisms and Ballistic Performance of TiC-TiB2 Composite Armour under the Impact of Long-Rod Kinetic-Energy Projectiles
Applications of Advanced Composite Materials in Bullet-Proof Fields and their Study
Manufacture and Research on Performance and Organizations of New Type Carburized Bainitic Hollow Steel
Effective Reinforcement of Graphene in Poly (vinyl alcohol) Nanocomposites at Low Loading via Enhanced Interfacial Interaction
Study on Characteristics and Oil Displacement Characteristics of High Concentration Polymer System
Hollow Structure of Nano-Crystals by Microemulsion Method
Light Absorption Enhancement in Single Si(Core)/SiO2(Shell) Coaxial Nanowires for Photovoltaic Applications
Influence of SiO2 Content on Fractal of Grain Distribution in Low Silicon Sinter
Effect of MCM-41 and SBA-15 Mesoporous Molecular Sieves on Properties of PMMA-Based Composite
Compatibilizing Effect of MCM-41 and PP-g-MAH on the Mechanical and Thermal Analyzer of PP/PS Blends
Insulating and Thermally Conductive Composite Filled with Boron Nitride Particles
Glycocerebrosides from Sagina japonica (Sw.)
Paleodose of Quartz in Volcano Ash beside Huguang Maar Lake
Research on In Situ Observation of Fracture Process of Fiber/Epoxy Composites
Comparison of Removal of 2,4-DNT by Reduction Using Various Iron-Based Materials
Synthesis and Properties of Fluorenyl-Containing Multiblock Sulfonated Poly(Arylene Ether Sulfone) Membranes for Fuel Cell Applications
Studies on the Relationship of Polymer Backbone Rigidity and Properties for Proton Exchange Membranes Derived from Sulfonated Polys(Arylene Ether Sulfone)
Disulfide Cross-Linked Hydrogel Scaffold Based on Poly (Amic Acid) with Tunable Degradation
A New Method on Low-Cycle Corrosion Fatigue of Pipelines Taking Strain as Parameter
Development Strategy of Insulation Macromolecular Composite Materials
Research Progress of Heat Hv Insulation Resistance of Macromolecular Composite Materials
The Influence of Additives on the Heat-Resistant High Voltage-Resistant Insulation Material
Technology of Heat-Resistant & High Voltage-Resistant Insulation Materials Based on Polymer Composite
The Effects of Fiber Orientation on the Vibration Modal Behavior of Carbon Fiber Plain Woven Fabric/Epoxy Resin Composites
Modal and Harmonic Response Analysis of Composite Resin Concrete
The Research of the Harmful Substances about Aggregate in Concrete
Bending Properties of Five-Layer Biaxial Weft Knitted Fabric Reinforced Composite Materials
Al2O3/ADC12 Composites Fabricated by Decomposition-Synthesis Method and their Mechanical Behaviors
Synthesis of Li4Ti5O12 Anode Material for Lithium-Ion Batteries
Preparation of Two-Package Inorganic Insulation Coating
Preparation of LiFePO4/C Composite Powders
Research Development on the Preparation of Gold-Coated Magnetic Nanoparticles
Microstructure and Properties of Ultrafine Grained Cu-0.73%Cr Alloy after High Pressure Torsion
Adsorption Activity of Low Concentration Arsenic on Fe-Doped Titania Nanotubes
The Structure of the Turtle Shell and the Porous Metal Mimicking the Structure of the Turtle Shell
Preparation of Cellulose Acetate Ultra-Fine Fibers Containing Quasi-Spherical Gold Nanoparticles by Electrospinning Method
Kinetics Study of Copper (II) Adsorption from Solution by Wheat Husk
Strucutural Color Bio-Engineering by Replicating Morpho Wings
Size-Dependent Diffusion Coefficient in Nanocrystalline Materials
Use of Software to Facilitate Intumescent Fire-Retardant Coatings for Structural Steelworks's Formulation
Surface Modification of Aluminum by Plasma and the Surface Initiated Polymerization
Preparation of TiO2 Nanometer Thin Film Deposited on Organic Templates by a Layer-by-Layer Self-Assembly Method
Effect of TMCP Parameters on the Microstructure and Properties of the API X60 Pipeline Steels
Effects of Sintering Processes on Microscopy of CAS2-Al2O3 Refractory Materials
Study on Hydration Resistance Property of Gehlenite-Forsterite Refractory Material
Microstructure Observation of Ni50Ti45Ta5 Shape Memory Alloy
Preparation and Properties of C2AS-CAS2 Composite Pavement Bricks
Study on the Application of High Calcium Magnesium Slags to Light Heat-Insulation Refractory Materials
Vibration Isolation Research on the Metal Rubber Damping Rod of Payload Attach Fitting
Study of Aging Treatment on the Coating with 3%Cu/Fe-Based Alloy Fabricated by Laser Cladding
Microstructure and Mechanical Properties of Laser Welding Joint of Inconel 718 Super Thin Sheet
Effects of Electroless Parameters on Fe Content in Ni-P-Fe2O3 Composite Coatings on Stainless Steel
Prediction of the Average Diameter of Laser Ablated Silver Nanoparticles Colloid Based on Artificial Neural Networks
Preparation and Characterazation of Fluorescent Silica Microspheres
The Cohesive Energy of W and Mo Nanoparticles Based on Wulff Construction
A New Method for Manufacturing Composite Ingot of 4045/3004/4045 Aluminum Alloy
Sol-Gel Preparation of Optically Transparent Hydrophobic Hybrid Coating
Effect of Color on Optical Properties of New-Type Invisible Warp-Knitted Curtain Fabric
Conductive and Mechanical Properties of Graphite Nanoplatelets/PVC Nanocomposites Prepared by Melt Blending
A Novel Way to Fabricate Carbon Nanotubes Reinforced Copper Matrix Composites by Friction Stir Processing
Study on the Properties of Poly(lactic acid)/Starch/Chitosan Blended Materials
Influence of Electric Current Pulses on the Microstructure and Mechanical Properties of X70 Pipeline Steel
Study on the Microstructure and Properties of Resistance Spot Welding Joint for Ultra Fine-Grained Steel
Study on Synthesizing and Characterizing of Zinc Ferrite Nanoparticles
Synthesizing and Characterizing of ZrO2 Nanopowders via Ultrasound-Assisted Sol-Gel Method
Effect of Heat Treatment on Microstructure and Mechanical Properties of TRIP Steel Sheets Containing Aluminium
Effect of Extrusion Time on Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Prepared by Solid-State Recycling
Effect of Nd on the Microstructure and Mechanical Properties of High Aluminum Zinc-Based Alloy
Study on Porcelain Acoustic Emission Signal Based on All Phase Spectrum Analysis
Fabrication of Porous Reaction-Bonded Si3N4-SiC Composites
Effect of Material and Pin Surface on Vertical Force in Friction Stir Welding
The Plastic Deformation Characteristics of Crystalline Polymer Materials via Rolling Process
Mechanical Properties and Morphology of Poly(Lactic Acid) Composites with Oyster Shell Particles
Morphology Change of Extrusion Molded Crystalline Polymer by Rolling Process
Influence of Rubber Crumb Addition to Portland Cement Concrete
Effect of Yttrium Addition on High Temperature Oxidation Resistance of Co-10Cr-5Al Alloys
Grain Size Effects on the Oxidation of Two-Phase Cu-Fe-Al Alloys
Oxidation Resistance of Co-10Cr-5Si-0.3Y Alloys at 800 DegreesC
Research on the Effect of Heat Treatment Parameters of Rotary Tiller Blade on Anti-Wear Properties
HAP/UHMWPE-Coated Titanium Preparation of Biological Materials
Experimental Study on Residence Time Distribution of New Type Multi-Tubular Stirred Reactor
Biomineralization of the Hydroxyapatite with 3D-Structure for Enamel Reconstruction
Microstructure and Mechanical Properties of Mg-1Mn-0.6Ce Alloy Containing Yttrium
Numerical Simulation of Laser Welding for Different Thickness Aluminum Alloy Plate
Understanding the Effect of the Preparation Process on the Electrochemical Properties of 0.25Li2MnO3 0.75LiNi1/2Mn1/2O2 by Rietveld Refinement Method
Analysis on Residue Stresses in Coating of Thin-Wall Parts by Plasma Spraying
Study on Resistance Spot Welding Technology and Properties of TRIP800 High Strength Steel Sheet
Numerical Simulation of the Temperature Field During DP1000 Dual-Phase Steel Resistance Spot Welding
Surface Polishing of Plasma Carburized Austenitic Stainless Steel
Preparation of Light Transmitting Cement-Based Material with Optical Fiber Embedded by the Means of Parallel Arrange
Study on Reaction Products of B4C-CeB6/Al Composites
Rheological and Thermal Behavior of Recycled PET Modified by PMDA
Influences of Bleached Softwood Pulp Pretreated with Endo-Cellulase on Fiber Surface Properties and Aggregation Structure
Electrolysis Process for Preparation of Solar Grade Silicon
Analysis of Gas Utilization Efficiency in Injection Refining Process
Hydrothermal Synthesis and Characterization of Tb3+ Doped Hydroxyapatite
Microstructure and Mechanical Properties of Spray Deposited W9Mo3Cr4V High Speed Steel
Visualisation of Cornstarches Granule with Different Amylose/Amylopectin Contents: A Combined CLSM and SEM Approach
Force Analysis of Inclined Asphalt Concrete Wall Rockfill Dam Structure
Synthesis, Characterization and Photocatalytic Activity of Copper (II)-Doped Titanium Dioxide Powders
Modeling of Adsorption Isotherms for Hydrogen on Zeolite ZSM-5
A Review on Synthesis of High Performance Composites from Zircon
Phase Formation of Fe-Mn Binary Alloy During Sub-Rapid Solidification
Nano-Silver Paste with a Low Sintering Temperature
Densification and Microstructure of Tungsten Ore/Al-Cu Composites by Combustion Synthesis
Preparation of Coal Briquette by Using Coal Waste and Coal Slurry
Structure Design and Force Analysis of Dushan Inverted Siphon Engineering
Research on Microstructure and Properties of Welded Joint of 2205 Steel with FCAW
Study on Weldablity of Dissimilar Steel between 16MnR and S31803
Synthesis of Lignin-Base Bead Adsorbent and its Application in Removing Pb (II) from Aqueous Solution
Preparation and Characterization of Fe36Co36B20Si4Nb4 Nanocrystalline/Amorphous Matrix Composite
A Comparative Study on Co-Sorption of Zn(II) and As(V) by Mixed Fe/Al-PILCs Prepared at Different Calcination Temperatures
Preparation of Nano-Sized Tin Oxide by Polymer-Network Method
Structure Evolution of Fe-7.5at.%Ni Alloy Thin Strips under Near-Rapid Solidification Conditions
A Thermo-Sensitive Laser Imaging Composition Derived from a Modified Phenolic Resin
Effect of Amount on Expansion Property of MgO-Type Expansive Agent Used in Cement-Based Materials
Mechanical Strength and Resistance to Ultraviolet Radiation of Repairing Mortars Based on Epoxy Resin
Study on the Resistance of Ultraviolet Radiation of Composite Materials Based on Epoxy Resin
Preparation of Thick-Film Organosilicone Coating
Progress in Thermal Conductivity of Modified Polypropylene Composites
Synthesis and Characterization of Poly(Aryl Ether Quinoxaline)s with Controlled Molecular Weight
Effect of the Al Incorporation on the Dispersibility and Crystallization of AZO Nanoparticles Prepared by Sol-Gel Combustion Technique
Characterization of Nanosize Mn-Zn Ferrites Coated with Citric Acid
Effect of Sintering Conditions on the Properties of Mn-Zn Ferrites Produced by Co-Precipitation
Fundamental Research of Sintering Process on Improving the Tumbler Strength of Low SiO2 Sinter
Thermal Cracking Resistance of Shotcrete Based on Temperature Matched Curing
Effect of Metakaolin Mixed with Fly Ash on the Strengths of Concrete
Preparing of the Nano ATO Heat-Insulation Glass Coating
Effect of Heat Treatment on Properties and Structural Changes of Poly(p-Phenylene Benzobisoxazole) Fiber
Influence of Ion Current Density on the Surface Morphology of AZ31 Magnesium Alloy Irradiated by High-Intensity Pulsed Ion Beam
Chapter 2: Chemical Engineering
Effect of Calcium Salts of Aliphatic Dicarboxylic Acids on the Formation of Crystalline Form in Isotactic Poly(Propylene)
Study on Purification and Removal of Iron from Alloy Anode
Synthesis and Properties of Organosoluble and Transparent Fluorinated Aromatic Polyimides
The Feasibility Research of Using an Intensified Continuous Mini-Reactor to Replace a Discontinuous Reactor
Water-Soluble Acrylic Acid Copolymers and their Recycling Properties
Synthesis and Characterization of Spinel LiNi0.5Mn1.3Ti0.2O4
One-Step Synthesis of Methyl Isobutyl Ketone from Acetone Catalysed by Ni-Zirconia
Cationic Gelatin Graft Copolymers: Synthesis, Characterization and Application
Alkali-Thickening Characteristics of Vinyl Acetate and Vinyl Ester Versatic Acid Copolymer Latex Using Carboxylic Monomers
Preparation of Acicular -FeOOH by Liquid-Precipitation and Air-Oxidation Method
Particle Morphology and Electrochemical Performance of LiFePO4 Synthesized via Hydrothermal Process at 200 DegreesC
Analysis on Factors Influencing Flake Silver Particles Prepared by Chemical Reduction
Effect of Doping Cation Valencies on Low Temperature Performance of LiFePO4/C
Study on the Effect of Distillation Residue in Corn Polyols Industry on Thermoplastic Starch
Adsorption of Thiophene Out of Model Gasoline Using Metal Ion-Exchanged Zeolite
Functional Modification of Xylan-Rich Hemicelluloses in Ionic Liquid
Study on the Electrodeoxidation of Solid Dy2O3 in Molten CaCl2
Perovskite-Type Complex Oxides Catalyst Composed of Rare Earth-Alkaline Earth-Transition Metal Elements for Soot Combustion in the NO and O2 Atmosphere
Preparation of the AC/TiO2 Composite Particles in Normal Temperature and Degradation of TNT
Adsorption of Pb2+ in Wastewater Using Adsorbent Derived from Grapefruit Peel
Li(Ni1/3Co1/3Mn1/3)O2 with High Rate Capability Synthesized via a Novel Gel-Combustion Method
Properties of LiNi0.5Mn1.5O4 /Li Cell in Ionic Liquid Electrolyte Based on N-methyl-N-propylpiperidinium Bis(trifluoromethanesulfonyl)imide
Study on SOC Forecast Model in Regions of Hilly Purple Soil by Water Erosion
Microwave and Conventional Hydrothermal Synthesis of TiO2 Nanoparticles and their Photocatalytic Activities
Effect of Sr Addition on the Microstructure of Mg-6Zn-2Al-2Ca Alloy
A Study of the Adsorption and Diffusion Behavior of a Single Polydimethylsiloxane Chain on a Silicon Surface by Molecular Dynamics Simulation
Isolation and Characteristic of Chondroitin Sulfate from Grass Carp Scales
Application of Response Surface Methodology for Optimization of Cellulose Solution by ZnCl2
Calculation of the Separation Factor for some Silane Systems
Calculation on the Free Energy of Mixing of some Silane Systems
Preparation and Spectral Properties of Er3+/Yb3+ Co-Doped Phosphate Glass Active Optical Fiber
Preparation and Characterization of Novel Borate K2O*CaO*4B2O3*12H2O:Sm3+
Adsorption Disciplinarian of Metal Ions on Collagen Fiber Immobilized Bayberry Tannin
Preparation and Characterization of Lanthanum (La)-Doped TiO2
The Study on the Defect States and Persistent Luminescent Mechanism of MgSiO3: Mn2+, Dy3+ Phosphor
Research on Characteristics of Combination Flooding System and Oil Displacement Efficiency
Study on Minimum Miscible Pressure and Oil Displacement Law for CO2 Flooding
Impacts of Biochar on Agriculture Soils and Environmental Implications
The Development of Poplin which Release Anion
The Effects of Citric Acid on the Performance of Li3V2(PO4)3/C
Surface Modification of Spinel LiMn2O4 with Y2O3 for Lithium-Ion Battery
Influence of Weight Ratio of Citric Acid Cross Linker on the Structure and Conductivity of the Crosslinked Polymer Electrolytes
Effect of Rotating Electromagnetic Field on the Conductivity of Aqueous NaCl Solution
Effects of the Pre-Freezing Time on the Structures and Electrochemical Performances of Co-B Alloys
Composite FeF3*3H2O/C Cathode Material for Lithium Ion Battery
Comparison on Effect of Alternating and Stationary Magnetic Field on the Conductivity of NaCl Solutions
Preparation and Characterization of Nickel Plating Graphite Nanosheet Filled Conductive Adhesive
Effect of Ultrasonic Treatment on Acid Hydrolysis and Oxidation of Corn Starch
Study on Preparation and Mechanical Intensity of Nano-Mg(OH)2/Tussah Silk Fibroin Composite Membrane
Photocatalytic Oxidation of Methyl Orange over Titania-Bearing Blast Furnace Slag Photocatalysts and Effects of Cr(VI) under Visible Irradiation
Visible Light Photocatalytic Activity of C, N, S-Tridoped Anatase TiO2 Nanosheets
Synthesis and Photoluminescence Properties of Sm3+-Doped Ca10(PO4)6(OH)2 Nanowire
Ab Initio Study the Transport Properties of Alumium-Phosphorus Dopped Si Atomic Nanowire
Influence of pH on the Morphology and Luminescence Properties of Europium-Doped Hydroxyapatite Nanoparticles
Research on Chloride Leaching of Cu, Zn and Ag from Flotation Tailings
Research on Copper Solvent Extraction from the Solution Containing High Concentration of Sulphuric Acid and Iron
Research of Catalytic Oxidation Synthesis of Cyclopentene to Glutaraldehyde
The Disassociation of Cordyceps Exopolysaccharide in Aqueous Solution Induced by Ultrasound
Synthesis of N,N,N-Trimethyl-1-Adamantyl Quaternary Ammonium Hydroxide and Technology Development
Low Temperature Plasma-Initiated Copolymerization of Acrylamide and Sodium Acrylate
Plasma Activated Acrylamide Initiated Polymerization of Acrylamide
Removal of Strontium Ions from Aqueous Solution by Adsorption onto Sodium Trititanate Whisker
Optical Properties and Liquid-Crystalline Behaviors of Cyclosiloxane-Based Oligomer Films
Effect of Bismuth on the Microstructure and Corrosion Resistance of Galvanized Coating
Preparation of Slag Reactive Powder Concrete and the Research on its Resistance to Chloride Ion Permeability
Research on Preparation and Electromagnetic Properties of Polyaniline Nanofibers through Interfacial Polymerization
Mechanism and the Influences of Different Substrates on Photocatalytic Property of TiO2 Membrane
Influence of Calcining Atmosphere on Synthesis of Mixed Conducting Oxides SrFeCo0.5Oy by Citrates Sol-Gel Method
600 DegreesC Isothermal Section of the Zn-Fe-Nb Ternary System at the Zn-Rich Corner
Effect of Supports on the Properties of Co-Mo Nitride Catalysts for Ammonia Decomposition
Research of Oxidation Starch Conversion and Crystallinity
Effects of Electromagnetic Stirring Plus Single Pulse on the Microstructures and Properties of High Strength Al-Cu Alloy Welds
Kinetic Investigation of Thermal Decomposition Reactions of Podophyllic Acid and Picropodophyllic Acid
Synthesis of Diphenyl Carbonate from Carbon Dioxide Catalyzed by ZnCl2 Supported on SiO2-TiO2
Synthesis and Characterization of Hexagonal Prismatic Ca10(PO4)6(OH)2 Prepared by Homogeneous Precipitation Method
Preparation of Silver Nano-Particles by CO(NH2)2*H2O2
Preparation of Nanocrystalline Magnesium Aluminate Spinel Powder by Thermal Explosion Mode of LCS
Study of Adsorption Characteristics on Active Carbon for Ventilation Air Methane Separation
Effect of the Surface Morphology of Calcium Carbonate on the Impact Toughness of Polyamide 6/EPDM-M/CaCO3 Ternary Composites
Hot Corrosion Behavior of Sputtered Fe-Y Alloy Coatings with Different Y Contents
Degradation Characteristics of Rice Straw/Poly(Lactic Acid) Composites
Preparation and Characterization of the Novel Ti/PbO2 Electrodes by Electrodeposition and Anodization
The Chemical Reaction Mechanics of Bastnaesite in Low Temperature Activation Process
Photocatalytic Activity of Sm-Doped BiVO4 Powders Prepared by Chemical Precipitation Process
Simultaneity Extraction of Iron and Nickel from Acidic Leaching Solution of Laterite Ores with Emulsion Liquid Membrane
Fabrication and Photocatalytic Activities of TiO2 Nano-Films Deposited at Different Ar/O2 Flow Ratios by DC Magnetron Sputtering
Direct Synthesis of 3,5-Dinitropyrazole Catalyzed by Newly Sulfated Nanosolid Superacid TiO2/ SO
Study on Properties of Al2O3 -CaO-Na2CO3 Slag System
Effect of Different Initiator Systems on Graft Copolymerization of Cellulose Fiber with Caprolactam
Infrared Spectrum Analysis of Perfluoro Polyethers (PFPE) of Fluorocarbon-Based Magnetic Fluid's Base Liquid
Research on Methods of Ascertaining Characteristic Parameter for Small Watershed Soil Erosion
Improved Enzymatic Depolymerization of Chitosan by Ionic Liquid Pretreatment and the Effect of Oligo-Chitosan on Intestinal Flora In Vitro
Preparation and its Adsorption Characters of Pb2+ Ions-Imprinted Chitosan/Palygorskite Hybrid Materials
Effect of Ultrasound on Acid-Alcohol Treated Hydrolysis of Starch
Synthesis of Titania Nanotubes and its Application on Oxalic Acid Removal from Aquatic Environment
Hydrothermal Synthesis of Glutathione-Capped ZnCdSe Alloyed Quantum Dots
Effect of Chloride on Corrosion Behavior of Reinforcing Steel HRB335
Treatment of Ammonia-Nitrogen Wastewater by Electrodialysis
Study on Oxidation Kinetics of Catalytic Oxidation of Magnesium Sulfite
The Novel SO3H-Functionalized Ionic Liquids Promoted Synthesis of Xanthenedione Derivatives in Aqueous Media under Microwave Irradiation
Study on Corrosion Mechanism of Gas Quenching Steel Slag to MgO Crucible
Effects of Y3+-Doping on the Electrochemical Properties of LiV3O8 Cathode Material Prepared by a Solid-State Method
Optimized Structures and Theoretical 1H-NMR Spectral Analysis of the Methylene Protons in Dibenzyl Sulfoxide
Structures, Theoretical Vibrational Frequency and 1H-NMR Spectral Analysis of Pyrazine-Dibenzylsulfoxide Platinum(II) Complexes
Electrochemical Detection of Hydrogen Peroxide at Carbon Nanotubes-Poly(Styrene-Co-N-Isopropylacrylamide) Nanoparticles Modified Electrode
Sensitive Electrochemical Detection of 2,4-Dichlorophenol Using Novel Carbon Fiber Microelectrode
Ambient Condition Synthesis of Ag Submicron Crystallites from AgNO3, H2O2 and NH3*H2O
Study on BaSiO3 Solid-Solid Reaction through Irreversible Thermodynamics
Design and Optimization FCCU Absorption-Stabilization System through Process Simulation
Selectivity Patterns of Radical Reactions in 1-Hexene Pyrolysis
Effect of Additives in the Casting Solutions on the Morphology and Performance of PVDF Membranes
Removal of Fluoride from Aqueous Solution by Using Ca-Bentonite and H-Bentonite
Preparation and Optical Properties of Poly[3,4-Bis-(1,3-Dioxane-2-Ylethyl)] Thiophene
Self-Assembly of 4-Vinylbenzoic Acid Layer on the Magnetic Nanoparticles and In Situ Polymerization
Research on Excellent Engineer of Chemical Machinery Cultivating System
Synthesis and Characterization of Gradient Cathode Material for Lithium-Ion Batteries
Investigation on the Co-Combustion Characteristics of Textile Dyeing Sludge and Sawdust
Cryogenic Interlaminar Properties of PBO Fiber/Epoxy Composites
Intelligent Operation Control for the Fused Magnesia Production
Research on Liquid Fuels and Chemicals of Waste Blends Copyrolysis
Hydrodynamics and Mass Transfer Behavior of a Novel Structured Packing with Diversion Windows
CFD Simulations and PIV Measurements for Optimization of Flow Pattern in a Sieve Plate Extraction Column
Mass Transfer Performance of a Novel Structured Packing for Liquid-Liquid Extraction
Synthesis and Performances Analysis of Imidazoline Quaternary Ammonium Salts Containing Thioureido Group
Study on Fire Residues in Pure Cotton Fabric Combustion
Residual Stress and Corrosion Resistance Experimental Analysis of Closed Extruding Fine Blanking Parts Surface
Preparation and Photocatalytic Properties of TiO2-CoFe2O4 Magnetic Composite Photocatalyst
Spectral Properties of Alpha-Cu2(OH/D)3Br at Room Temperature
Study of Copolymerization Mechanism between Vinyl-POSS and Citronellal with Quantum Chemistry Program Based on DFT
by "Nielsen BookData"