Chemical engineering material properties : selected, peer reviewed papers from the 2011 International Symposium on Chemical Engineering Material Properties (ISCEMP 2011), November 4-6, 2011, Shenyang, Liaoning, China

著者

• International Symposium on Chemical Engineering Material Properties
• Zhang, H. M.
• Wu, B.

書誌事項

Chemical engineering material properties : selected, peer reviewed papers from the 2011 International Symposium on Chemical Engineering Material Properties (ISCEMP 2011), November 4-6, 2011, Shenyang, Liaoning, China

edited by H.M. Zhang and B. Wu

（Advanced materials research, v. 391-392）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The 2011 International Symposium on Chemical Engineering and Material Properties (ISCEMP 2011) was a premier forum for the presentation of technological advances and research results in the fields of chemical engineering and material properties. ISCEMP 2011 brought together leading engineers and scientists, working in chemical engineering and material properties, from around the world. The present peer-reviewed papers were selected on the basis of originality, technical quality and research content.

目次

Preface and Organizing Committee Chapter 1: Material Science Hollow PtRu Nanospheres Catalyst Supported on Activated Carbon Fiber and Carbon Nanotubes for Methanol Electroxidation Preparation, Performance and Analysis of Carbon Fibers with Dielectric Barrier Discharges Plasma Surface Treatment Preparation and Properties of Carbon Nanotube / Polyaniline Nanocomposites Hybrid Supercapacitors Based on Polyaniline and Carbon Aerogels Composite Electrode Materials Synthesis and Electrochemical Performance of a Novel Nano-Sized Sn-Ni Alloy Composites for Lithium Batteries Tribological Properties of Al-21Si-0.8Mg-1.5Cu-0.5Mn Alloys against Steel under Lubrication Conditions Effect of La-Rich Misch Metal on Microstructure and Mechanical Properties of As-Extruded Mg-14Li-3Al Alloy Theoretical Account for the Bimetallic Bonding of the Copper Clad Aluminum Wire by Clad-Drawing at Room Temperature Study on Ni/Al Interface Diffusion at Initial Time by Using Molecular Dynamics Method Optimization of Process Parameters of Hot-Dip Aluminized Coating Surface Characteristics of Single Sisal Fiber and Interfacial Adhesion of Composites Exploring the Reaction Heat Controlling and Engineering Scale Law in the Process to Synthesis PPTA Using Low-Temperature Solution Polycondensation Experimental Research on Bonding Intensity of Iron Ores in the Sintering Process Study of Ferrous Material Reduction Based on Thermal Reserve Zone of Modern Blast Furnace The Influence of Iron Ore Quality Degradation on the Assimilability of Sinter Ore Preparation of High Performance Polybenzoxazine Resin Using Hyperbranched Polyborate Modes of Occurrence of Trace Elements (Na, K, Fe, Si) in Coal Used for COREX Process Preparation and Optical Properties of CdS/PVK Nanocomposites Based on CdS Nanorod Arrays Microstructure and Properties of 0.2mm Thick Sheet Titanium Alloy by Micro-Laser Welding A Lattice Boltzmann Model of Calculating Mass Diffusivity in Nanofluids A Simulation Analysis Method for Crack Resistance of Hydraulic Concrete Based on Temperature-Stress Test Synthesis of Stereoregular Polylactide Study on the Weakest Interaction Model for Chiral Resolution Using Molecularly Imprinted Polymer Insulation Properties of the Monolithic and Flexible Aerogels Prepared at Ambient Pressure Effect of Sr Addition on Microstructures of as-Cast Mg-5Sn-5Zn Alloy Effect of Tide on Sewage Disposal by Bio-Film Process Dosing with Enzyme Effect of Water Flow Pattern on the Treatment of Discharged Sewage by Biological Accelerator-Bio-Film Process Effect of Sewage Load Shock on Channel Disposal by Bio-Film Process Torque Rheological Properties of Bamboo Flour/PP Composites Effect of Different Compatibilizing Agents on the Compatibility of Lignin/LDPE Composites Properties Analysis of Organic Montmorillonite (OMMT) Reinforced RTV Composites Influences of Rare-Earth Ions Doping on the Structure and Photocatalytic Activity of TiO2 Research on the Interfacial Tension between Anion Gemini Surfactant Solution and Crude Oil Proportion Design of Autoclaved Cement Concrete Based on High Strength Study on the Resistance Spot Microwelding Parameters of Copper and Nickel-Plated Steel Dissimilar Metals Excess Gibbs Free Energies of Selected Binary Halogenated Silane Mixtures at 101.3KPa Single Layer Graphene Oxide Sheets-Epoxy Nanocomposites with Greatly Improved Mechanical and Thermal Properties Preparation of High-Performance Brick from Construction and Demolition Waste Preparation and Properties of Microstructure Flexible Image Transfer Fiber Materials Preparation of Flame-Retardant Asphalt for Tunnels Strontium Modification of Biomaterial: The Effective Approach to Enhance the Bioactivity and Biocompatibility of Calcium Silicate Preparation and Combustion Properties of Sepiolite/LDPE Composites Synthesis of a Novel Intumescent Flame Retardant Oligomer and its Application in ABS Copolymer Preparation and Thermal Properties of Novolac Resin/Graphite Nanosheet Composites Influences of Hot Rolling Conditions on the Microstructure and Mechanical Properties of Low-Alloy Steel Europium Doped Titania Nanocomposites with Enhanced Photocatalytic Activity towards the Degradation of Partially Hydrolysis Polyacrylamide Synthesis and Luminescence Properties of Tris (8-Hydroxyquinoline) Iron Spindle-Like Structures at Room Temperature The Influences of Lateral Confinement on Ballistic Performance of TiC-TiB2 Composites under the Impact of Long-Rod Kinetic-Energy Projectiles Penetration Mechanisms and Ballistic Performance of TiC-TiB2 Composite Armour under the Impact of Long-Rod Kinetic-Energy Projectiles Applications of Advanced Composite Materials in Bullet-Proof Fields and their Study Manufacture and Research on Performance and Organizations of New Type Carburized Bainitic Hollow Steel Effective Reinforcement of Graphene in Poly (vinyl alcohol) Nanocomposites at Low Loading via Enhanced Interfacial Interaction Study on Characteristics and Oil Displacement Characteristics of High Concentration Polymer System Hollow Structure of Nano-Crystals by Microemulsion Method Light Absorption Enhancement in Single Si(Core)/SiO2(Shell) Coaxial Nanowires for Photovoltaic Applications Influence of SiO2 Content on Fractal of Grain Distribution in Low Silicon Sinter Effect of MCM-41 and SBA-15 Mesoporous Molecular Sieves on Properties of PMMA-Based Composite Compatibilizing Effect of MCM-41 and PP-g-MAH on the Mechanical and Thermal Analyzer of PP/PS Blends Insulating and Thermally Conductive Composite Filled with Boron Nitride Particles Glycocerebrosides from Sagina japonica (Sw.) Paleodose of Quartz in Volcano Ash beside Huguang Maar Lake Research on In Situ Observation of Fracture Process of Fiber/Epoxy Composites Comparison of Removal of 2,4-DNT by Reduction Using Various Iron-Based Materials Synthesis and Properties of Fluorenyl-Containing Multiblock Sulfonated Poly(Arylene Ether Sulfone) Membranes for Fuel Cell Applications Studies on the Relationship of Polymer Backbone Rigidity and Properties for Proton Exchange Membranes Derived from Sulfonated Polys(Arylene Ether Sulfone) Disulfide Cross-Linked Hydrogel Scaffold Based on Poly (Amic Acid) with Tunable Degradation A New Method on Low-Cycle Corrosion Fatigue of Pipelines Taking Strain as Parameter Development Strategy of Insulation Macromolecular Composite Materials Research Progress of Heat Hv Insulation Resistance of Macromolecular Composite Materials The Influence of Additives on the Heat-Resistant High Voltage-Resistant Insulation Material Technology of Heat-Resistant & High Voltage-Resistant Insulation Materials Based on Polymer Composite The Effects of Fiber Orientation on the Vibration Modal Behavior of Carbon Fiber Plain Woven Fabric/Epoxy Resin Composites Modal and Harmonic Response Analysis of Composite Resin Concrete The Research of the Harmful Substances about Aggregate in Concrete Bending Properties of Five-Layer Biaxial Weft Knitted Fabric Reinforced Composite Materials Al2O3/ADC12 Composites Fabricated by Decomposition-Synthesis Method and their Mechanical Behaviors Synthesis of Li4Ti5O12 Anode Material for Lithium-Ion Batteries Preparation of Two-Package Inorganic Insulation Coating Preparation of LiFePO4/C Composite Powders Research Development on the Preparation of Gold-Coated Magnetic Nanoparticles Microstructure and Properties of Ultrafine Grained Cu-0.73%Cr Alloy after High Pressure Torsion Adsorption Activity of Low Concentration Arsenic on Fe-Doped Titania Nanotubes The Structure of the Turtle Shell and the Porous Metal Mimicking the Structure of the Turtle Shell Preparation of Cellulose Acetate Ultra-Fine Fibers Containing Quasi-Spherical Gold Nanoparticles by Electrospinning Method Kinetics Study of Copper (II) Adsorption from Solution by Wheat Husk Strucutural Color Bio-Engineering by Replicating Morpho Wings Size-Dependent Diffusion Coefficient in Nanocrystalline Materials Use of Software to Facilitate Intumescent Fire-Retardant Coatings for Structural Steelworks's Formulation Surface Modification of Aluminum by Plasma and the Surface Initiated Polymerization Preparation of TiO2 Nanometer Thin Film Deposited on Organic Templates by a Layer-by-Layer Self-Assembly Method Effect of TMCP Parameters on the Microstructure and Properties of the API X60 Pipeline Steels Effects of Sintering Processes on Microscopy of CAS2-Al2O3 Refractory Materials Study on Hydration Resistance Property of Gehlenite-Forsterite Refractory Material Microstructure Observation of Ni50Ti45Ta5 Shape Memory Alloy Preparation and Properties of C2AS-CAS2 Composite Pavement Bricks Study on the Application of High Calcium Magnesium Slags to Light Heat-Insulation Refractory Materials Vibration Isolation Research on the Metal Rubber Damping Rod of Payload Attach Fitting Study of Aging Treatment on the Coating with 3%Cu/Fe-Based Alloy Fabricated by Laser Cladding Microstructure and Mechanical Properties of Laser Welding Joint of Inconel 718 Super Thin Sheet Effects of Electroless Parameters on Fe Content in Ni-P-Fe2O3 Composite Coatings on Stainless Steel Prediction of the Average Diameter of Laser Ablated Silver Nanoparticles Colloid Based on Artificial Neural Networks Preparation and Characterazation of Fluorescent Silica Microspheres The Cohesive Energy of W and Mo Nanoparticles Based on Wulff Construction A New Method for Manufacturing Composite Ingot of 4045/3004/4045 Aluminum Alloy Sol-Gel Preparation of Optically Transparent Hydrophobic Hybrid Coating Effect of Color on Optical Properties of New-Type Invisible Warp-Knitted Curtain Fabric Conductive and Mechanical Properties of Graphite Nanoplatelets/PVC Nanocomposites Prepared by Melt Blending A Novel Way to Fabricate Carbon Nanotubes Reinforced Copper Matrix Composites by Friction Stir Processing Study on the Properties of Poly(lactic acid)/Starch/Chitosan Blended Materials Influence of Electric Current Pulses on the Microstructure and Mechanical Properties of X70 Pipeline Steel Study on the Microstructure and Properties of Resistance Spot Welding Joint for Ultra Fine-Grained Steel Study on Synthesizing and Characterizing of Zinc Ferrite Nanoparticles Synthesizing and Characterizing of ZrO2 Nanopowders via Ultrasound-Assisted Sol-Gel Method Effect of Heat Treatment on Microstructure and Mechanical Properties of TRIP Steel Sheets Containing Aluminium Effect of Extrusion Time on Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Prepared by Solid-State Recycling Effect of Nd on the Microstructure and Mechanical Properties of High Aluminum Zinc-Based Alloy Study on Porcelain Acoustic Emission Signal Based on All Phase Spectrum Analysis Fabrication of Porous Reaction-Bonded Si3N4-SiC Composites Effect of Material and Pin Surface on Vertical Force in Friction Stir Welding The Plastic Deformation Characteristics of Crystalline Polymer Materials via Rolling Process Mechanical Properties and Morphology of Poly(Lactic Acid) Composites with Oyster Shell Particles Morphology Change of Extrusion Molded Crystalline Polymer by Rolling Process Influence of Rubber Crumb Addition to Portland Cement Concrete Effect of Yttrium Addition on High Temperature Oxidation Resistance of Co-10Cr-5Al Alloys Grain Size Effects on the Oxidation of Two-Phase Cu-Fe-Al Alloys Oxidation Resistance of Co-10Cr-5Si-0.3Y Alloys at 800 DegreesC Research on the Effect of Heat Treatment Parameters of Rotary Tiller Blade on Anti-Wear Properties HAP/UHMWPE-Coated Titanium Preparation of Biological Materials Experimental Study on Residence Time Distribution of New Type Multi-Tubular Stirred Reactor Biomineralization of the Hydroxyapatite with 3D-Structure for Enamel Reconstruction Microstructure and Mechanical Properties of Mg-1Mn-0.6Ce Alloy Containing Yttrium Numerical Simulation of Laser Welding for Different Thickness Aluminum Alloy Plate Understanding the Effect of the Preparation Process on the Electrochemical Properties of 0.25Li2MnO3 0.75LiNi1/2Mn1/2O2 by Rietveld Refinement Method Analysis on Residue Stresses in Coating of Thin-Wall Parts by Plasma Spraying Study on Resistance Spot Welding Technology and Properties of TRIP800 High Strength Steel Sheet Numerical Simulation of the Temperature Field During DP1000 Dual-Phase Steel Resistance Spot Welding Surface Polishing of Plasma Carburized Austenitic Stainless Steel Preparation of Light Transmitting Cement-Based Material with Optical Fiber Embedded by the Means of Parallel Arrange Study on Reaction Products of B4C-CeB6/Al Composites Rheological and Thermal Behavior of Recycled PET Modified by PMDA Influences of Bleached Softwood Pulp Pretreated with Endo-Cellulase on Fiber Surface Properties and Aggregation Structure Electrolysis Process for Preparation of Solar Grade Silicon Analysis of Gas Utilization Efficiency in Injection Refining Process Hydrothermal Synthesis and Characterization of Tb3+ Doped Hydroxyapatite Microstructure and Mechanical Properties of Spray Deposited W9Mo3Cr4V High Speed Steel Visualisation of Cornstarches Granule with Different Amylose/Amylopectin Contents: A Combined CLSM and SEM Approach Force Analysis of Inclined Asphalt Concrete Wall Rockfill Dam Structure Synthesis, Characterization and Photocatalytic Activity of Copper (II)-Doped Titanium Dioxide Powders Modeling of Adsorption Isotherms for Hydrogen on Zeolite ZSM-5 A Review on Synthesis of High Performance Composites from Zircon Phase Formation of Fe-Mn Binary Alloy During Sub-Rapid Solidification Nano-Silver Paste with a Low Sintering Temperature Densification and Microstructure of Tungsten Ore/Al-Cu Composites by Combustion Synthesis Preparation of Coal Briquette by Using Coal Waste and Coal Slurry Structure Design and Force Analysis of Dushan Inverted Siphon Engineering Research on Microstructure and Properties of Welded Joint of 2205 Steel with FCAW Study on Weldablity of Dissimilar Steel between 16MnR and S31803 Synthesis of Lignin-Base Bead Adsorbent and its Application in Removing Pb (II) from Aqueous Solution Preparation and Characterization of Fe36Co36B20Si4Nb4 Nanocrystalline/Amorphous Matrix Composite A Comparative Study on Co-Sorption of Zn(II) and As(V) by Mixed Fe/Al-PILCs Prepared at Different Calcination Temperatures Preparation of Nano-Sized Tin Oxide by Polymer-Network Method Structure Evolution of Fe-7.5at.%Ni Alloy Thin Strips under Near-Rapid Solidification Conditions A Thermo-Sensitive Laser Imaging Composition Derived from a Modified Phenolic Resin Effect of Amount on Expansion Property of MgO-Type Expansive Agent Used in Cement-Based Materials Mechanical Strength and Resistance to Ultraviolet Radiation of Repairing Mortars Based on Epoxy Resin Study on the Resistance of Ultraviolet Radiation of Composite Materials Based on Epoxy Resin Preparation of Thick-Film Organosilicone Coating Progress in Thermal Conductivity of Modified Polypropylene Composites Synthesis and Characterization of Poly(Aryl Ether Quinoxaline)s with Controlled Molecular Weight Effect of the Al Incorporation on the Dispersibility and Crystallization of AZO Nanoparticles Prepared by Sol-Gel Combustion Technique Characterization of Nanosize Mn-Zn Ferrites Coated with Citric Acid Effect of Sintering Conditions on the Properties of Mn-Zn Ferrites Produced by Co-Precipitation Fundamental Research of Sintering Process on Improving the Tumbler Strength of Low SiO2 Sinter Thermal Cracking Resistance of Shotcrete Based on Temperature Matched Curing Effect of Metakaolin Mixed with Fly Ash on the Strengths of Concrete Preparing of the Nano ATO Heat-Insulation Glass Coating Effect of Heat Treatment on Properties and Structural Changes of Poly(p-Phenylene Benzobisoxazole) Fiber Influence of Ion Current Density on the Surface Morphology of AZ31 Magnesium Alloy Irradiated by High-Intensity Pulsed Ion Beam Chapter 2: Chemical Engineering Effect of Calcium Salts of Aliphatic Dicarboxylic Acids on the Formation of Crystalline Form in Isotactic Poly(Propylene) Study on Purification and Removal of Iron from Alloy Anode Synthesis and Properties of Organosoluble and Transparent Fluorinated Aromatic Polyimides The Feasibility Research of Using an Intensified Continuous Mini-Reactor to Replace a Discontinuous Reactor Water-Soluble Acrylic Acid Copolymers and their Recycling Properties Synthesis and Characterization of Spinel LiNi0.5Mn1.3Ti0.2O4 One-Step Synthesis of Methyl Isobutyl Ketone from Acetone Catalysed by Ni-Zirconia Cationic Gelatin Graft Copolymers: Synthesis, Characterization and Application Alkali-Thickening Characteristics of Vinyl Acetate and Vinyl Ester Versatic Acid Copolymer Latex Using Carboxylic Monomers Preparation of Acicular -FeOOH by Liquid-Precipitation and Air-Oxidation Method Particle Morphology and Electrochemical Performance of LiFePO4 Synthesized via Hydrothermal Process at 200 DegreesC Analysis on Factors Influencing Flake Silver Particles Prepared by Chemical Reduction Effect of Doping Cation Valencies on Low Temperature Performance of LiFePO4/C Study on the Effect of Distillation Residue in Corn Polyols Industry on Thermoplastic Starch Adsorption of Thiophene Out of Model Gasoline Using Metal Ion-Exchanged Zeolite Functional Modification of Xylan-Rich Hemicelluloses in Ionic Liquid Study on the Electrodeoxidation of Solid Dy2O3 in Molten CaCl2 Perovskite-Type Complex Oxides Catalyst Composed of Rare Earth-Alkaline Earth-Transition Metal Elements for Soot Combustion in the NO and O2 Atmosphere Preparation of the AC/TiO2 Composite Particles in Normal Temperature and Degradation of TNT Adsorption of Pb2+ in Wastewater Using Adsorbent Derived from Grapefruit Peel Li(Ni1/3Co1/3Mn1/3)O2 with High Rate Capability Synthesized via a Novel Gel-Combustion Method Properties of LiNi0.5Mn1.5O4 /Li Cell in Ionic Liquid Electrolyte Based on N-methyl-N-propylpiperidinium Bis(trifluoromethanesulfonyl)imide Study on SOC Forecast Model in Regions of Hilly Purple Soil by Water Erosion Microwave and Conventional Hydrothermal Synthesis of TiO2 Nanoparticles and their Photocatalytic Activities Effect of Sr Addition on the Microstructure of Mg-6Zn-2Al-2Ca Alloy A Study of the Adsorption and Diffusion Behavior of a Single Polydimethylsiloxane Chain on a Silicon Surface by Molecular Dynamics Simulation Isolation and Characteristic of Chondroitin Sulfate from Grass Carp Scales Application of Response Surface Methodology for Optimization of Cellulose Solution by ZnCl2 Calculation of the Separation Factor for some Silane Systems Calculation on the Free Energy of Mixing of some Silane Systems Preparation and Spectral Properties of Er3+/Yb3+ Co-Doped Phosphate Glass Active Optical Fiber Preparation and Characterization of Novel Borate K2O*CaO*4B2O3*12H2O:Sm3+ Adsorption Disciplinarian of Metal Ions on Collagen Fiber Immobilized Bayberry Tannin Preparation and Characterization of Lanthanum (La)-Doped TiO2 The Study on the Defect States and Persistent Luminescent Mechanism of MgSiO3: Mn2+, Dy3+ Phosphor Research on Characteristics of Combination Flooding System and Oil Displacement Efficiency Study on Minimum Miscible Pressure and Oil Displacement Law for CO2 Flooding Impacts of Biochar on Agriculture Soils and Environmental Implications The Development of Poplin which Release Anion The Effects of Citric Acid on the Performance of Li3V2(PO4)3/C Surface Modification of Spinel LiMn2O4 with Y2O3 for Lithium-Ion Battery Influence of Weight Ratio of Citric Acid Cross Linker on the Structure and Conductivity of the Crosslinked Polymer Electrolytes Effect of Rotating Electromagnetic Field on the Conductivity of Aqueous NaCl Solution Effects of the Pre-Freezing Time on the Structures and Electrochemical Performances of Co-B Alloys Composite FeF3*3H2O/C Cathode Material for Lithium Ion Battery Comparison on Effect of Alternating and Stationary Magnetic Field on the Conductivity of NaCl Solutions Preparation and Characterization of Nickel Plating Graphite Nanosheet Filled Conductive Adhesive Effect of Ultrasonic Treatment on Acid Hydrolysis and Oxidation of Corn Starch Study on Preparation and Mechanical Intensity of Nano-Mg(OH)2/Tussah Silk Fibroin Composite Membrane Photocatalytic Oxidation of Methyl Orange over Titania-Bearing Blast Furnace Slag Photocatalysts and Effects of Cr(VI) under Visible Irradiation Visible Light Photocatalytic Activity of C, N, S-Tridoped Anatase TiO2 Nanosheets Synthesis and Photoluminescence Properties of Sm3+-Doped Ca10(PO4)6(OH)2 Nanowire Ab Initio Study the Transport Properties of Alumium-Phosphorus Dopped Si Atomic Nanowire Influence of pH on the Morphology and Luminescence Properties of Europium-Doped Hydroxyapatite Nanoparticles Research on Chloride Leaching of Cu, Zn and Ag from Flotation Tailings Research on Copper Solvent Extraction from the Solution Containing High Concentration of Sulphuric Acid and Iron Research of Catalytic Oxidation Synthesis of Cyclopentene to Glutaraldehyde The Disassociation of Cordyceps Exopolysaccharide in Aqueous Solution Induced by Ultrasound Synthesis of N,N,N-Trimethyl-1-Adamantyl Quaternary Ammonium Hydroxide and Technology Development Low Temperature Plasma-Initiated Copolymerization of Acrylamide and Sodium Acrylate Plasma Activated Acrylamide Initiated Polymerization of Acrylamide Removal of Strontium Ions from Aqueous Solution by Adsorption onto Sodium Trititanate Whisker Optical Properties and Liquid-Crystalline Behaviors of Cyclosiloxane-Based Oligomer Films Effect of Bismuth on the Microstructure and Corrosion Resistance of Galvanized Coating Preparation of Slag Reactive Powder Concrete and the Research on its Resistance to Chloride Ion Permeability Research on Preparation and Electromagnetic Properties of Polyaniline Nanofibers through Interfacial Polymerization Mechanism and the Influences of Different Substrates on Photocatalytic Property of TiO2 Membrane Influence of Calcining Atmosphere on Synthesis of Mixed Conducting Oxides SrFeCo0.5Oy by Citrates Sol-Gel Method 600 DegreesC Isothermal Section of the Zn-Fe-Nb Ternary System at the Zn-Rich Corner Effect of Supports on the Properties of Co-Mo Nitride Catalysts for Ammonia Decomposition Research of Oxidation Starch Conversion and Crystallinity Effects of Electromagnetic Stirring Plus Single Pulse on the Microstructures and Properties of High Strength Al-Cu Alloy Welds Kinetic Investigation of Thermal Decomposition Reactions of Podophyllic Acid and Picropodophyllic Acid Synthesis of Diphenyl Carbonate from Carbon Dioxide Catalyzed by ZnCl2 Supported on SiO2-TiO2 Synthesis and Characterization of Hexagonal Prismatic Ca10(PO4)6(OH)2 Prepared by Homogeneous Precipitation Method Preparation of Silver Nano-Particles by CO(NH2)2*H2O2 Preparation of Nanocrystalline Magnesium Aluminate Spinel Powder by Thermal Explosion Mode of LCS Study of Adsorption Characteristics on Active Carbon for Ventilation Air Methane Separation Effect of the Surface Morphology of Calcium Carbonate on the Impact Toughness of Polyamide 6/EPDM-M/CaCO3 Ternary Composites Hot Corrosion Behavior of Sputtered Fe-Y Alloy Coatings with Different Y Contents Degradation Characteristics of Rice Straw/Poly(Lactic Acid) Composites Preparation and Characterization of the Novel Ti/PbO2 Electrodes by Electrodeposition and Anodization The Chemical Reaction Mechanics of Bastnaesite in Low Temperature Activation Process Photocatalytic Activity of Sm-Doped BiVO4 Powders Prepared by Chemical Precipitation Process Simultaneity Extraction of Iron and Nickel from Acidic Leaching Solution of Laterite Ores with Emulsion Liquid Membrane Fabrication and Photocatalytic Activities of TiO2 Nano-Films Deposited at Different Ar/O2 Flow Ratios by DC Magnetron Sputtering Direct Synthesis of 3,5-Dinitropyrazole Catalyzed by Newly Sulfated Nanosolid Superacid TiO2/ SO Study on Properties of Al2O3 -CaO-Na2CO3 Slag System Effect of Different Initiator Systems on Graft Copolymerization of Cellulose Fiber with Caprolactam Infrared Spectrum Analysis of Perfluoro Polyethers (PFPE) of Fluorocarbon-Based Magnetic Fluid's Base Liquid Research on Methods of Ascertaining Characteristic Parameter for Small Watershed Soil Erosion Improved Enzymatic Depolymerization of Chitosan by Ionic Liquid Pretreatment and the Effect of Oligo-Chitosan on Intestinal Flora In Vitro Preparation and its Adsorption Characters of Pb2+ Ions-Imprinted Chitosan/Palygorskite Hybrid Materials Effect of Ultrasound on Acid-Alcohol Treated Hydrolysis of Starch Synthesis of Titania Nanotubes and its Application on Oxalic Acid Removal from Aquatic Environment Hydrothermal Synthesis of Glutathione-Capped ZnCdSe Alloyed Quantum Dots Effect of Chloride on Corrosion Behavior of Reinforcing Steel HRB335 Treatment of Ammonia-Nitrogen Wastewater by Electrodialysis Study on Oxidation Kinetics of Catalytic Oxidation of Magnesium Sulfite The Novel SO3H-Functionalized Ionic Liquids Promoted Synthesis of Xanthenedione Derivatives in Aqueous Media under Microwave Irradiation Study on Corrosion Mechanism of Gas Quenching Steel Slag to MgO Crucible Effects of Y3+-Doping on the Electrochemical Properties of LiV3O8 Cathode Material Prepared by a Solid-State Method Optimized Structures and Theoretical 1H-NMR Spectral Analysis of the Methylene Protons in Dibenzyl Sulfoxide Structures, Theoretical Vibrational Frequency and 1H-NMR Spectral Analysis of Pyrazine-Dibenzylsulfoxide Platinum(II) Complexes Electrochemical Detection of Hydrogen Peroxide at Carbon Nanotubes-Poly(Styrene-Co-N-Isopropylacrylamide) Nanoparticles Modified Electrode Sensitive Electrochemical Detection of 2,4-Dichlorophenol Using Novel Carbon Fiber Microelectrode Ambient Condition Synthesis of Ag Submicron Crystallites from AgNO3, H2O2 and NH3*H2O Study on BaSiO3 Solid-Solid Reaction through Irreversible Thermodynamics Design and Optimization FCCU Absorption-Stabilization System through Process Simulation Selectivity Patterns of Radical Reactions in 1-Hexene Pyrolysis Effect of Additives in the Casting Solutions on the Morphology and Performance of PVDF Membranes Removal of Fluoride from Aqueous Solution by Using Ca-Bentonite and H-Bentonite Preparation and Optical Properties of Poly[3,4-Bis-(1,3-Dioxane-2-Ylethyl)] Thiophene Self-Assembly of 4-Vinylbenzoic Acid Layer on the Magnetic Nanoparticles and In Situ Polymerization Research on Excellent Engineer of Chemical Machinery Cultivating System Synthesis and Characterization of Gradient Cathode Material for Lithium-Ion Batteries Investigation on the Co-Combustion Characteristics of Textile Dyeing Sludge and Sawdust Cryogenic Interlaminar Properties of PBO Fiber/Epoxy Composites Intelligent Operation Control for the Fused Magnesia Production Research on Liquid Fuels and Chemicals of Waste Blends Copyrolysis Hydrodynamics and Mass Transfer Behavior of a Novel Structured Packing with Diversion Windows CFD Simulations and PIV Measurements for Optimization of Flow Pattern in a Sieve Plate Extraction Column Mass Transfer Performance of a Novel Structured Packing for Liquid-Liquid Extraction Synthesis and Performances Analysis of Imidazoline Quaternary Ammonium Salts Containing Thioureido Group Study on Fire Residues in Pure Cotton Fabric Combustion Residual Stress and Corrosion Resistance Experimental Analysis of Closed Extruding Fine Blanking Parts Surface Preparation and Photocatalytic Properties of TiO2-CoFe2O4 Magnetic Composite Photocatalyst Spectral Properties of Alpha-Cu2(OH/D)3Br at Room Temperature Study of Copolymerization Mechanism between Vinyl-POSS and Citronellal with Quantum Chemistry Program Based on DFT

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB08383684
• ISBN:
  • 9783037853337
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 2 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058