New materials, applications processes : selected, peer reviewed papers from the International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2011), December 23-25, 2011, Beihai, China

著者

• International Conference on Chemical, Material and Metallurgical Engineering
• Zeng, Jianmin
• Kim, Yun-Hae
• Chen, Yanfeng

書誌事項

New materials, applications processes : selected, peer reviewed papers from the International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2011), December 23-25, 2011, Beihai, China

edited by Jianmin Zeng, Yun-Hae Kim and Yanfeng Chen

（Advanced materials research, v. 399-401）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

The 461 peer-reviewed papers presented in this volume are grouped into 14 chapters: Non-Ferrous Metallic Materials, Iron and Steel, Composites, Micro/Nano-Materials, Ceramics, Optical/Electronic/Magnetic Materials, New Functional Materials, Environmentally Friendly Materials, New Energy Materials, Biomaterials, Materials Forming and Machining, Physics and Numerical Simulation of Material Processes, Surface Engineering/Coatings, and Mechanical Behavior and Fracture. The voluminous contents function as a handbook guide to these topics. Volume is indexed by Thomson Reuters CPCI-S (WoS).

目次

Preface and Organizing Committee Chapter 1: Non-Ferrous Metal Material The Study about Microstructure Characterization of AlCoCrTiNiCu_x High Entropy Alloy System with Multi-Principal Element Preparation and Properties Research of Cu-2.3Ni-0.24Si Alloy Numerical Simulation Software of Casting Process used for Computer Aided Instruction Precipitate and Age Hardening Response of As-Cast Mg-8Yb-0.5Zr Magnesium Alloy Relative Activities of Deformation Modes in AZ31 Magnesium Alloy Predicted by Mesoscopic Crystalline Model Effects of Ca on Microstructure and Properties of Spray Deposited RE Mg-Al-Zn Alloy Isothermal Section of the Zr-Sn-Nb System at 450 DegreesC in Zirconium Rich Corner(Zr 55 at.%) Passivator Composition of Rich of Phytic Acid Used for Brass-Strip Effect of Rolling Process on the Microstructure of AlMgSi Alloy Fractography Analysis on the Fracture Behavior of High Strength Aluminum Alloy Preparation and Characterization of PbO2 on Aluminum Substrate Effect of Ultrasonic Cavitation Acting on Solidified Structures of 7050 Aluminum Alloy Effect of Additives on the Expansion Behavior of Alumina-Spinel Castables Effect of Ultrasonic Field on Centerline Segregation of Cast Aluminum Alloy 7050 Ingots Long-Time Thermal Structural Stability Study on NiCr20TiAl Alloy Effects of Homogenization Treatment on Microstructure and Properties of Mg-Zn-Nd-Cd-Zr Alloy Behaviors of the Zr-1.0Sn-0.39Nb-0.31Fe-0.05Cr Alloy at High Temperature Thermodynamic Analysis of the Reduction of Na2WO4 through the Mechanochemical Reaction Experimental Study on Solidification of Copper-Iron Alloys during Wedge-Mold Casting Corrosion Behavior of Anodic Films Formed on Aluminium 7A04 Alloy in Boric/Sulphuric Mixed Acid and in Chromic Acid The 3d Electrons and Microdefects in Binary Ti-Al Alloys Studied by Positron Annihilation Research of Mo Powder's Densification during Sintering Chapter 2: Iron and Steel Mechanisms for Enhancing Strip Flatness in Temper Mill and their Application Analysis on Primary Recrystallization Characteristics of High Permeability Grain-Oriented Silicon Steel by Inherent Inhibitor Method and Acquired Inhibitor Method The Electrochemical Behavior of Electrolytic Tinplate Effect of Deformation Degree and Diameter Ratio on Performance of Hadfield Steel during Cold Asynchronous Rolling Effect of Stress on the Corrosion Behaviors of X70 Steel in NaHCO3/NaCl Solution Microstructure and Mechanical Properties of X80/X100 High Deformability Pipeline Steel Ageing Precipitate Strengthening of Cu-Containing Structural Steels Determination of Optimal Coiling Temperature and Cold Reduction Ratio of 260MPa Grade High Strength Nb-IF Steel Effects of Zn(OH)2 on Corrosion Behavior of Hot Dipped Zn Coating in Freshwater Effect of Texture on Secondary Work Embrittlement of IF Steels Microstructure Evolution in Low-Carbon Bainitic Steel during Tempering Characteristics of Rust Layers Formed on Carbon Steel in Seawater The Effect of Mechanical Properties of 2.0% Vanadium Ductile Iron after Double Quenching Method Analysis on Tensile Properties of Stainless-Steel Fiber and Yarn Quality 650 DegreesC Long-Term Structure Stability Study on 18Cr10NiNb Heat-Resistant Steel Effect of H2S/CO2 Pressure on the Corrosion Behaviors of L360QCS in the Environments Containing Elemental Sulfur Effects of Electric Pulse on Solidification Process of Fe-C-S Alloy Treated with RE Effect of Solution Treatment Time on Microstructure and Martensitic Transformation Point of C250 Steel Influence of Allotriomorphic Ferrite under Different Growth Modes on the Variant Selection of Bainite in a Low Carbon Steel Researches on the Behavior of Carbon and Sulfur Segregations of 82B Billet The Influence of Heat Treatment on Microstructure and Properties of 00Cr15Ni7Mo2Cu2 Supermarteniste Stainless Steel Inclusion Removal at the Free Surface of Steel Bath by Bubble Flotation High Temperature Mechanical Property and Microstructure Study of Micro-Alloyed Q345B Structural Steel Microstructure and Mechanical Properties of 60Si2Mn Steel after Austenite Inverse Phase Transformation by Sub-Temperature Quenching Study on Microstructure and Mechanical Properties of Newly Developed High Carbon Fe-Mn-Cu-C TWIP Steels High Temperature Deformation Behavior of 25Cr5MoA Nitriding Steel Influences of Microstructure and Texture on Toughness of Acicular Ferrite Pipeline Steel Study on Damping Capacities of Nodular Cast Iron Dense Bar Produced by Horizontal Continuous Casting Effects of Different Manganese Content on Microstructures and Properties of TWIP Steel The Processing, Microstructure and Mechanical Properties of Low Alloy Wear Resistance Steels Microstructure and Texture Comparison of an Acicular Ferrite Pipeline Steel with Different Hot Rolling Process Orthogonal Test on Heat Treatment Parameters of Modified Low Chromium White Cast Iron Mechanical Properties and Microstructure of SS400 Friction Stir Welds Pursuant to Welding Distance Chapter 3: Composites Characteristics of NEPE Propellant with Ammonium Dinitramide (ADN) Self-Supporting Electrode Based-on SWNT Paper for Supercapacitors Optimisation of Manufacturing Conditions of Carbon Fibre Reinforced Polyetherketoneketone (PEKK) Composite Effect of Hot Rolling Deformation on Superplastic Deformation Behavior of TiNP/2014Al Composite Preparation and Characterization of Monocrystal Nano-Sliver Lamella The Physical and Mechanical Behavior of Hot Press Mould WPCs Ni-Coated Carbon Nanotubes/Mn-Zn Ferrite Composite as Viable Microwave Absorbing Materials Microstructure Modeling for Prediction of Thermal Expansion Coefficient of Plain Weave C/SiC Considering Manufacturing Porosities The Research on Polyxymethylene Silicon Oxide Whisker Polybasic Thermal Stabilizes Composite Material Synthesis and Characterization of Hybrid Polymer PAFC-CPAM Effect of Sintering Temperatures on the Reaction-Bonded Si3N4/SiC Composite Ceramics Formation of Decarbonization Layer and its Effect on Corrosion Resistance of Zirconia Graphite Materials Synthesis and Structural Characterization of Oleic Acid Embedded Layered Magnesium Borate Preparation of AlN-ZrO2(Ca) Composites by Hot Pressed Sintering A Study on the Tensile Strength of the Layer Splice Laminates Preparation and Recognition Properties of Levodropopizine Molecularly Imprinted Composite Membranes Synthesis and Characterization of Temperature-Sensitive TSPU/PNIPAAm Semi-IPN Polymer Anodic Surface Treatment on Carbon Fibers - The Effect on Microstructure of Pyrocarbon Matrix during Chemical Vapor Deposition Study on the Reinforcement of Aluminum Alloy A356 Using SiC Particles by Mechanical Stirring Mechanical Properties of Sandwich Structure Composites Preparation and Properties of CNTs-Ti3Al/B4C Composites Preparation and Properties of Bagasses Cellulose Microcrystal Reinforced Poly(Vinyl alcohol) Composite Film Experimental Investigation on Rubberized Concrete Mixed Proportion Design Research of Aluminum Sheet Encapsulated by Organic Silane Acrylate Resin and Tetraethyl Orthosilicate Ar Plasma Modified Multiwalled Carbon Nanotubes/NiFe2O4/Polyimide Nanocomposites Effects of Alloys on Microstructure and Properties of Mo2FeB2-Based Cermets Mechanical and Ablative Properties of Polyacrylonitrile(PAN)/RTV Silicone Internal Insulating Composites Preparation and Properties of Polyvinylpyrrolidone / Zinc Oxide Composite Nanofibers Performance of Polypropylene Composites Filled by Calcium Carbonate Whiskers Microstructure Evolution and Mechanical Properties of Mg2B2O5 Whiskers Reinforced AZ31B Magnesium Composites Extruded at Elevated Temperatures Study on Microstructure of Vanadium and Chromium-Carbide Reinforced Fe Matrix Surface Composite Influence of Dispersant on the Dispersion Stability of Nano-CoFe2O4 Refrigeration Oil Research on the Fiber Breakage Damage in Fiber Reinforced Polymer Laminate Preparation and Characterization of a Novel Flame Retarded MCA-PA6 Resin by In Situ Polymerization Effect of Sintering Temperature and Particle Size on Porous SiC/Si3N4 Composite Ceramics Effect of Surface Treatment on the Mechanical Property and Micro-Structrue of Polypropylene/Attapulgite Composites In Situ Polymerization Approach to Magnesium Hydroxide-Reinforced PA6 Composites Effects of Accelerated Aging Period of Time at 150 DegreesC on Tensile Strength of 3-Dimension-4-Direction Braided/Epoxy Resin Composites Investigation of Phase Composition and Microstructure Characterization of the B4C/BN Composites Fabricated by Hot-Pressing Process Effect of High-Temperature Heat Treatment on Mechanical Property of Cr-Geopolymer Composite Properties of Jute Fibers Reinforced Friction Materials Generic Geometric Model for 3D Woven Interlock Composites The Influence of Clay-Like Sepiolite on the Structure and Properties of Polyurethaneurea/Sepiolite Nanocomposites The Application Finite Element Analysis with the Temperature Field Simulation of Flame-Retardant Effect on OMMT and APP for PP/PA6 Composts An Experimental-Numerical Approach of the Metallic Insert in CFRP/Honeycomb Sandwich Structures under Normal Tensile Load Chapter 4: Micro/Nano Materials A Novel Nonionic, Multi-Surfactant System and Separation Method for the Synthesis of Active Carbonic Anhydrase Nanoparticles Low Temperature Combustion Synthesis and Characterization of Pr-CeO2 Doped with Zr Red Ceramic Pigments Influences of Tm and N Doping on Surface Properties and Photoactivities of Anatase-TiO2 Nanoparticles Controlled Synthesis of Water Soluble Silver Nanoparticles and the Molluscicidal Effect Fabrication and Characterizes of TiO2 Nanomaterials Templated by Lyotropic Liquid Crystal Fabrication, Optical Properties and SERS Spectra of Silver Semishells Arrays Agglomeration Eliminating Antimony Doped Tin Oxide (ATO) Nanoparticles by Different Drying Methods Morphology Evolution during Annealing and Electrical Conductivity of Titania Nanotube Films Synthesis and Microwave-Absorbing Properties of Ni-Carbon Sphere Composites Micromechanical Analysis of Single-Fiber Pull-Out Test of Fiber-Reinforced Viscoelastic Matrix Composites Microwave Synthesis of Nano-Titanium Carbide Study of Oxidation Behavior of Zn Nanoparticles Hydrothermal Synthesis and Property of Rare Earth of Fluoride NaYF4:Er3+ Materials Discussion on Micro-Structure and Transport Properties of Carbon Micro-Coil Preparation of Nanometer Ferric Oxide Powders from Ferrous Sulfate by Improved Hydrolysis Method Morphology and Optical Properties of Nickel Oxide Nanostructure from Aqueous Solution Controlled Synthesis of Two-Dimensional Networked Gold Nanowires and Microkites by Sodium Carboxymethyl Cellulose-Surfactant Soft Template Stability of the Vanadium Oxide Films Forme by Reactive Sputtering and Ion Beam Enhanced Deposition Methods Preparation for Nano-NiO by Electrolysis of Nickel in HOCH2CH2OH Solution Study on the Preparation and Performance of Epoxy Resin/AlOOH Nano-Composite Materials Effect of Polyacrylamide Hydrogels on Synthesis of Hollow Sodalite Spheres Study on the Preparation and Properties of Copper Nanoparticles and their Nanofluids Purification of Carbon Nanotubes by Microwave Technology The Antifriction Properties of Ultra-Fine Serpentine Powders as Lube Oil Additive on Iron-Based Friction Pair Magnetoresistance and Exchange Bias Effect of (Co2MnSi)1-X-(NiO)X Nanocomposites Synthesis of Mesoporous Nickel Phosphate with Long Hollow Nanotubes Optical Properties Characterization of InGaN/GaN near UV Photodetector with Surface Nano-Structure Fabricated by Nano-Imprinting Hydrothermal Synthesis of Neodymium Orthophosphate with Controlled Structure and Morphology Effect of Characteristic Size on the Effective Thermal Conductivity of Anodic Aluminum Oxide (AAO) Porous Thin Films Synthesis of Lipid-Quantum Dots and the Fluorescence Resonance Energy Transfer of Quantum Dots in Lipid Bilayer Research Progress in Application of the Functional Ordered Microstructures Electrochemical Corrosion Behavior of Cu-20Fe-12Cr Alloys with the Different Grain Size in Solutions Containing Chloride Ions Preparation and Photocatalytic Property of TiO2/C Synthesis with Microwave-Assisted Sol-Gel Method and Photocatalytic Activity of Quantum-Sized TiO2 under Solar and Ultraviolet Irradiation Preparation of High-Purity -Alumina by Oil-in-Water Microemulsion Preparation of Ordered TiO2 Macroporous Membrane Using PBMA Colloid Crystal as Template Preparation and Microstructure of Al-Intercalated Vermiculite Fabrication and Performances of Titanium-Grafted Microencapsulated Phase Change Materials Hydrothermal Synthesis of Calcium Borate Whiskers Preparation of Nanometer-Sized Nickel Oxide by Hydrothermal Decomposition A Novel Gold Nanoparticle/Poly(AMPS-co-HEMA) Composite Hydrogel for Selective Catalysis Effect of Stacking Fault Energy on the Mechanical Properties of Cold-Rolling Cu and Cu-Al-Zn Alloys Uiformly-Sized, Molecularly Imprinted Polymers for Naproxen by Precipitation Polymerization Preparation and Thermal Stability of Micro/Nano Silicone Rubber Particles Study on Preparation and Photocatalytic Performance of Co-Doped TiO2 with Cu and Ce Gas Response for Ethanol of SnO2 Nanorods as Sensing Materials Prepare Uniformity Superfine WO3 by Spray Drying Morphological and Magnetic Characteristics of Strontium Ferrite Micro- and Nanofibers Microwave Assisted Eletroless Copper Plating on Carbon Nanotubes Syzygium Samarangense Leaf Mediated Biosynthesis of Gold Nanoparticles and its Application in Catalysis Molecular Dynamics Simulation of Nanoindentation on Diamond Crystal [100] Surface Preparation and Characterization of Titania Porous-Nanotube Arrays with a High Growth Rate on Flexible Stainless Steel Substrate Shape Modification of Net Shaped CuO and Cu Nano Particles for a Percolation Threshold Using a Chelating Agent Dealloying Behavior of Al-Cu-Sn Ternary Alloy in an Alkaline Solution Chapter 5: Ceramic Effects of Doped Cu, Mn on Electrical Properties of SrTiO3-Based Varistor Ceramics Synthesis of Al4SiC4 Powders from Kaolin Grog, Aluminum and Activated Carbon as Raw Materials The Influence of Cu on the Electrical Properties of Ti(C, N)-Based Cermets Effects of Ion Doping at Different Sites on Electrical Properties of Ferroelectric Bi4Ti3O12 Ceramics Effect of Ferric Oxide Addition on the Performance of MgO-Al2O3 System Materials Fabrication of MgO-SiC Refractory Composite Powders by High-Silicon Magnesite and Carbon Black Powders Synthesis of Al4SiC4-Al8SiC7 Composite Powders by Carbothermal Reduction Process Preparation of A14SiC4 by Solid-State Reaction Influence of Heat Treatment Process on Properties of Polycrystalline Alumina Fiber Process Factors Using Centrifugal Spray Drying to Prepare Bauxite Microspheres Research on the Sinterability of MgAl2O3/SiC Composites in Air Atmosphere Synthesis of MgAl2O4-SiC-C Refractory Powders by Using Forsterite, Alumina and Carbon Black Effect of Sintering Atmosphere on the Dielectric Properties of BaTiO3 via Boron-Addition Liquid-Phase Sintering Effect of Praseodymium Salt on Properties of Anodic Aluminum Oxide Films Preparation and Hydration Resistance of MgO-MgAl2O4 Composite Refractory Preparation of the System of BaO-MgO-Al2O3-TiO2 Acid-Resistant Fracturing Proppants Synthesis of Ce0.8Nd0.2O1.9 Nanocrystalline Powders by Low Temperature Combustion Process Effect of Processing Parameters on the Properties of Glass-Ceramics from Arc-Melting Slag of Incineration Fly Ash Magnetite and Anti-Microbial Properties of Ag2O-CaO-Fe2O3-SiO2 Glass-Ceramic by Sol-Gel Method Chapter 6: Optical/Electronic/Magnetic Materials Effect of Annealing Atmosphere on Structure and Properties in Chemically Deposited PbS Thin Films Microwave Absorbing Performance and Infrared Emissivity of Co-Doped ZnO Optical Properties of Two Novel Terbium Thermo-Sensitive Poly(N-Isopropylacrylamide) Gels Magnetization Reversal in Ferromagnetic Thin Films Syntheses, Crystal Structures and Luminescence of Two Coordination Polymers Based on Isophthalic Acid and 2-(3-Pyridyl)benzimidazole Ligands Synthesis and Fluorescence Switching of a New Purple Photochromic Diarylethene Mixed-Phase Crystallization and Visible Fluorescence in Rare-Earth Ions Doped Germanate Glass-Ceramics Studies of 3d Electrons and Hyperfine Interactions in Ordered and Disordered Fe50Al50 Alloys Gamma Irradiation Effect on Load-Deflection Curve of Semiconductor Package Molecular and Crystal Structure Analysis of an Oxalate-Bridged Sodium 2D Polymer: [Na( 1,1,2,3-Oxalato)(di- 1,1-H2O)]N Synthesis and Luminescent Properties of Y2O3:Eu3+ Nanocrystal by the Ultrasonic Method Highly C-Axis Oriented Barium Titanate Ferroelectric Films Deposited on SrTiO3 Substrate Using an Off-Axis Sputtered Conductive Oxide Layer as Bottom Electrode Effect of Eu3+ on Spectroscopic Properties and Energy Transfer in Er3+/Eu3+-Doped Ga2O3-GeO2 Glass The Research about the III-Nitride Compounds Epitaxially Grown on Si Substrate Synthesis, Photochromism and Optical Storage of a New Type of Diarylethene Compound Preparation of Magnetic Fe3O4 Nanoparticles by Microbial Reduction Combining Natural Oxidation Method Investigation on the Morphologies of Dislocations in Sapphire Crystals The Dielectric Tunability of Fe-Doped Pb0.3Sr0.7TiO3 Thin Films Prepared by Sol-Gel Method Synthesis and Photoluminescence Properties of Doped Europium Complexes with 2-Pyrazinecarboxylate Photoluminescence Properties of Sm3+-Doped La2O3 Powders Electrochemical Synthesis and Photovoltaic Properties of Polythiothene/CdSe Double Layers Electrode Synthesis and Luminescent Properties of M2P2O7:Eu3+ (M = Ca, Sr, Ba ) Phosphors Luminescence Properties of Er3+/Tm3+-Doped Ga2O3-Bi2O3-PbO-GeO2 System Glasses Synthesis, Characterization, Room Temperature Fluorescence and Phosphorescence Properties of Complex Gd(C5H8NO3)2(C3H5N2)2Cl3*3H2O Influence of Al Substitution on Magnetocaloric Effect in La0.8-XAlXCe0.2Fe11.4Si1.6 Compounds Spectroscopic Properties of Er3+-Doped Ga2O3-GeO2-Bi2O3-PbO Glass Electrochemical Synthesis of POT for Electrochromic and Solar Cell Materials Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core Effects of C Addition on Glass-Forming in FeCPSiBMoMn Bulk Metallic with Good Soft-Magnetic Properties Structure and Luminescence of Ba3MgSi2O8: Eu2+, Mn2+ Phosphors Blue Upconversion Luminescence Properties of La2(WO4)3:Yb3+/Tm3+Phosphor A New Fluorescent Material of Zn (II) Complex with 1-Acetyl-2-Naphthol-4, 4'-Diaminodiphenylmethane Preparation and Characterization of Light-Color Conductive Composite Based on Talc Study the Effect of Junction Temperature on the Peak Wavelength in GaN-Based High-Power Green Light Emitting Diodes Efficient Synthesis and Properties of a Photochromic Hybrid Diarylethene Bearing a Isoxazole Moiety Synthesis and Magnetic Properties of Poly(Schiff Base) Complex Containing 4,7-Disubstituted-1,10-Phenanthroline Hardness Variation of Ball Bond Wire Bonding Chapter 7: New Functional Materials Synthesis, Properties and Application in Optical Memory of a Novel Photochromic Diarylethene Bearing an Anthracene Ring The Effect of Hyperbranched Polymers on the Dyeing Properties of Polypropylene Fibers Study on the Wear Properties and Wear Mechanism about TC4 and G3 Alloy Tubing Steel in Dry Condition The In Vitro Degradation Kinetics of Polyurethane Prodrug Materials Study on the Properties of Mesogenic Monomer Exhibiting Blue Phase and Synthesis of Side-Chain Liquid-Crystalline Polysiloxanes Effects of Coal on the Structure and Properties of Coal/LDHs Composites The Best Solution for Removal of Iron and Oil from Hot Condensed Water The Research on the Surface Topography of Diamond Crystals at High Pressure and High Temperature A Novel Method for Preparation of Antimicrobial Cellulose Textile by Surface Carbamatization and N-Chlorination Simulation of GaAs/AlxGa1-xAs/InyGa1-y As Double-Barrier Resonant Tunneling Structures Ordered Langmuir-Blodgett Films of Novel Sandwich-Type Heteroleptic (Porphyrinato) (Phthalocyaninato) Europium Complex -Fe /Nd2Fe14B Nanocomposites for Electromagnetic-Wave-Absorber in GHz Microwave Frequencies Synthesis, Photochromic Properties and Application in Optical Memory of a Diarylethene Based on Pyrrole Ring Cation-Exchange Membranes Prepared by Pre-Irradiation Grafting of Acrylic Acid and Sodium Styrene Sulfonate onto ETFE Membranes Synthesis and Optical Property of an Asymmetric Photochromic Diarylethene Derivative Bearing Benzofuran Synthesis and Properties of a New Photochromic Compound Bearing Isoxazol Moiety The Surface Modification of Silica with Vinyltriethoxysilane Synthesis and Photophysical Properties of Red-Emitting Iridium ( ) Complex Bearing Benzothiazole Synthesis and Adsorption Properties of Ethylenediamine Modified Chitosan/Nano-Iron Magnetic Microspheres Preparation, Characterization and Photocatalytic Activities of ZnO/TiO2 Nanotube Composites Effects of Hydrolyses on Lanthanide Inorganic-Organic Luminescent Materials The Research on Microstructure of Catalyst and Growth Mechanism of Boron-Doped Diamond Non-Dopant Electroluminescent Devices Based on Benzoxazinone Derivative as Strong Fluorescence in Solid Film Preparation of RHA-Paraffin Phase Change Materials Effect of Rare Earth Composite Refiner Agent on Decolorization and Fining of the Floating Glasses Drug Release Characteristics of P(AA-co-DMAA)/SA Interpenetrating Polymer Network Hydrogels The Luminescence and Energy-Transfer of Ce3+, Tb3+ Activated Sr3B2O6 Study on the Perfect Dislocation in Cd0.9Zn0.1Te Single Crystals by HRTEM Synthesis, Photochromism Properties of a Novel Hybrid Diarylethene Based on Hydroxyl Group Research on Thermal Conductive and Insulating Material Based on Phosphoric Acid Adhesive Chapter 8: Environmental Friendly Materials Influence of Lime Dust on Chloride Binding Capacity of Fly Ash-Cement Paste Study on the Optimal Formula of Lubricant with Uniform Design Evaluation of Relationship between Innitial Current, Conductance, Chloride Diffusion Coefficient and Charge Passed of Concrete Synthesis of Cordierite from the High-Alumina Fly Ash and Talc Powder Mixtures A New Ecofriendly Cold Ramming Paste for the Aluminum Electrolysis Cell Influence of Foaming Agent on the Properties of High Density Foam Concrete Thermal Characteristics of PCMs - TH29 in Building Energy Storage Different Constructed Wetland Substrates and their Applications Preparation and Adsorption Properties of PDMDAAC Modified Bentonite Effect of Polymer Content to Mechanical Properties of Fly Ash Slurry Real-Time Monitoring of Rebar Corrosion in Concrete Study on the Heterojunction Photocatalyst Nb2WO8/ZnO Prepared by Ball Milling Method The Effect of Surfactant and Alkali on the Surface Tension of Simulated Solutions of Alkali Activated Slag Cement System Properties of Concrete Containing Scrap-Tire Chips Preparation and Characterization of PP-PVA Blends and Controlled Release System Comprising Bensulfuron-Methyl Study on Properties of Cottonseed Protein Plastics Numerical Analysis Programming on the Concrete Elastic-Plastic Behavior Study on Stability of AgI/TiO2 Visible Light Photocatalysts in Solutions of Various pH Values Effect of Stone Dust Content in Manufactured Sand on Chloride Diffusion Coefficient of Various Strength Grade Concretes Study on the Effect of Amphoteric Bagasse Hemicellulose on Heavy Metal Adsorption Study on Preparation and Near-Infrared Reflective Properties of NaZnPO4 A New Fiber Reinforced Composite Material Properties and Engineering Application Grinding Aid Effect of Different Siliceous Material for Quick Lime Effect of the Additive on Thermal Conductivity of the Phase Change Material Preparation and Cement Fluidity of Slow-Release Polycarboxylate-Type Superplasticizer Synthesis of Polythiophene Nanoparticles by Microemulsion Polymerization for Photocatalysis Effect of Electric Field on Cation Migration and Electrode Reactions of Mortar with Different W/C Ratios Sol-Gel Transition Kinetics of Konjac Glucomannan Dilute Solution by Fluorescence Technique The Influence of the Combustion Atmosphere on the Desulfurization Characteristics Study on Photocatalysis Degradation of Phenol by Using Tourmaline/ TiO2 System as Catalyst Microwave-Assisted Synthesis of Corn Starch-Graft-Poly(AM-DADMAC) Research on the Performance of an Eco-Friendly Nitrogen Organic Boric Acid Ester Antirust Additive Influence of the MB Value of Manufactured Sand on the Mechanical Property of Concrete Study on Phenolic Resin Modified Magnesium Oxychloride Cement Adsorption of Dyes from Acidic Wastewater by Crosslinked Chitosan Resin Preparation and Mechanical Properties of Cotton Stalk Bast Fibers Reinforced Polylactic Acid Biodegradable Composites Preparation and Flame Retardancy of Unsaturated Polyester Resin Containing P-Toluenesulfonate-Pillared Layered Double Hydroxide Study on the Synthesis and Characterization of a Novel Phosphorus-Nitrogen Containing Intumescent Flame Retardant 1 Year Long Term on Strength Properties of Pozzolanics Local Soil Bricks Preparation of Activated Carbon Fiber Supported Nanoscale Fe0 for Simultaneous Adsorption and Dechlorination of Chloroform in Water Fenton-Like Mineralization of Anion Surfactant by Fe2O3/Attapulgite Catalyst Chapter 9: New Energy Materials Influence from Covering TiO2 Nanoparticles with Dense Films upon Electron Transport in Dye-Sensitized Solar Cells Investigation of Ni-Mo-P Coating Electrodeposition under Stabilized Magnetic Field and its Hydrogen Evolution Activity Study on Pt-SnO2/C Electrode Prepared by Different Content of Nafion for New Direct Ethanol Fuel Cells Electrochemical Performance of Polypyrrole/Multi-Walled Carbon Nanotubes Composites for Supercapacitors Electrodes Enhanced Hydrogen Storage Kinetics of Melt Spun Nanocrystalline and Amorphous Mg2Ni-Type Alloy by Substituting Ni with Co Fabrication and Photocatalytic Performance of Bi2O3 Doped with Fe3+ Study on Photoelectrochemical Performance of ZnO Nanotube /CdSeQuantum Dot-Sensitized Solar Cell An Excess Heat Phenomenon Triggered by Pressure in a H-Pd Gas-Loading System Effect on Hydrogen Evolution Properties of PtCuLaOX Membrane Electrode by Oxygen Flow and Acid Treatment Effect of Several Reagents on Photocatalytic Decolorization of Methyl Orange in Bi2O3 Suspension Systems Effect of Synthesis Conditions on the Structure and Electrochemical Properties of LiNi1/2Mn1/2O2 by Sol Gel Method Facile Synthesis of New Nanocomposite Based on Cobalt Oxide and Carbon Nanotubes with Excellent Electrochemical Capacitive Behavior Preparation and Characterization of Three Dimensional Sn-Co Alloy Based on Porous Ni for Lithium-Ion Batteries Enhanced Electrochemical Hydrogen Storage Characteristics of Mg2Ni-Type Alloy by Substituting Mg with La Preparation of Tin Nano-Spheres Film Anode Based on Copper-Nickel Nano-Pillars for Lithium Ion Batteries Dry Water: a Prospective Material for Methane Storage via Clathrate Hydrate Form Photoelectrical and Photovoltaic Peroperties of n-ZnO/p-Si Heterojunction Preparation of Tris(8-Hydroxyquinoline-5-Sulfonic Acid) Iron(III) Complex and Photocatalytic Property of Surface Modified TiO2 Effect of Synthesis Temperature on Structure and Electrochemical Properties of Nano-Sized Li4Ti5O12 by Self-Combustion Method Synthesis and Performance of LiCo1/3Mn1/3Ni1/3O2 Cathode Material for Lithium-Ion Battery Influence of Citric Acid and Calcination Temperature on Microstructure of the Nano Precursors of La-Mg Hydrogen Storage Alloy Effect of Temperature on Anaerobic Fermentation of Banana Stem Residue Preparation of Layered K4Nb6O17 and its Photocatalytic Activity for Hydrogen Production Controlled Crystallization Synthesis of Porous FePO4*3H2O Micro-Spheres for Fabricating High Performance LiFePO4/C Cathode Materials Surface Modification of LiCo1/3Ni1/3Mn1/3O2 with LaF3 for Lithium-Ion Batteries Study on a Cd-Fe Redox Flow Battery in a Sulphuric Acid Electrolyte Three Reductions Used in Preparation of the Silver Nano-Particle for Crystalline Silicon Solar Cell and its Characterization Chapter 10: Biomaterials Castor Oil and Microcrystalline Cellulose Based Polymer Composites with High Tensile Strength Evaluation and Optimization of The Factors Affectiing Enzymatic Hydrolysis of Silk Fibroin Appraisal about Stainless Steels for Piercing Jewelry Preparation and Morphology of SMPU/PNIPAM Semi-IPN Microporous Membrane Preparation of Cross-Linked Sodium Hyaluronate Gels with Different Molecular Weights of PEG and Research for its Viscoelasticity and Enzyme-Resistant Properties In Vitro Effect of Negative Poisson's Ratios of Auxetic UHMWPE on the Contact Mechanics in Artificial Hip Joint Replacement Effect of Pretreatment Process on Thermal Oxidation of Biomedical Grade Cobalt Based Alloy Experimental Investigation on the Lipid-Lowering Activity of Three Novel Antilipidemic Materials In Vitro Effect of Thermocycling on the Properties of Goat Skin Leather Corrosion Behavior of Porous Ti-24Nb-4Zr Alloy in Different Simulated Body Fluids Synthesis and Luminescence Properties of Tb3+-Doped Hydroxyapatites Analysis of Monosaccharide Composition of Maize Pollen Polysaccharides Mechanical Properties of Ti-Nb-X-CPP Biomaterial Fabricated by Spark Plasma Sintering Research on Compound and the Best Proportion of Phase Change Materials Using in Clothes Thermal-Oxidation Degradation of Microwave Drying Nature Rubber Preparation and Mechanical Properties of Zirconia-Mullite Nano-Comoposites from TiO2-Doped Si-Al-Zr-O Amorphous Bulk Chapter 11: Materials Forming and Machining Effect of Low-Voltage Electric Current Pulse on Semi-Solid Microstructure of Magnesium Alloy AZ91D Deformation Behavior of Porous Ti-6Al-4V Alloy Samples Fabricated by Hot Isostatic Pressing Development and Application on Simulation System of Plate Rolling Influence of Cutting Parameters on Surface Characteristics for Milling Powder Metallurgy Nickel-Based Superalloy Print Parameters Influence on Parts' Quality and Calibration with 3DP-Part I: Print Parameters Influence on Parts' Surface Topography Research on Process Optimization of Thin-Wall Plastics Injection Based on Moldflow and Orthogonal Experiment A Study on Forming Process of Chips during Cutting Cast Iron Effect of Controlled Rolling on Mechanical Property and Microstructure of Nb Microalloyed H Beam Finite Element Simulations of Working Characteristics of Solid Expandable Tubular Threaded Joint Application of Software DYNAFORM to the Tube Forming Process with Multi-Stages Electrode Material Effect on Electrical Discharge Machining PcBN Cutting Tool Processing Multi-Objective Optimization by Gaussian Genetic Algorithm and its Application in Injection Modeling Simulation of Drawing Process for Spring Seat of Spiral Step and Multiobjective Optimization Microstructure, Properties and Work Hardening Behavior of High Strength Cold Rolled Dual-Phase Steel Print Parameters Influence on Parts' Quality and Calibration with 3DP-Part II: Print Parameters Calibration and Contour Accuracy Control Effect of Processing Parameters on the Hot Compressive Deformation Behavior of 20CrMnTiH Effect of Tea Saponin on the Uptake of Cadmium by Corn from Soil Finite Element Analysis of -Titanium during Equal Channel Angular Extrusion Combined Effect of Electromagnetic Field and Grain Refiner on Microstructure of 310 Mm 7050 Aluminium Alloy Ingot Effects of Electromagnetic Stirring on Morphology Evolution of Primary Phase in Semisolid Alloy Control of Pressure Fluctuations in Foamed Sheet Die's Entrance Preparation of Fe3+/Ag+ Co-Doped Nanometer TiO2 Photocatalyst with Sol - Gel Auto-Igniting Method Effects of Hair Fibers on Braking Friction Materials Chapter 12: Physics and Numerical Simulation of Materials Process Structure Analysis and Optimization of Precision Grinding Machine Bed Simulation Analysis of Drag-Reduction Effect by Dimpled Surfaces with Quasicrystal and Crystal Lattice Arrangment Simulation and Experimental of Magnetron Sputtering Film Thickness Distribution Study of Solidification Microstructures of Multi-Principal High-Entropy Alloy FeCoNiCrMn by Using Experiments and Simulation Simulation of Microstructures in Solidification of Continuous Casting Aluminum Alloy Thin Strip Computational Simulation of Corrosion Perforation in the Oil-Tank Bottom with Cellular Automata Research on the Optimized Tool-Path Planning of Computer Controlled Optical Surfacing The Twinning Modes of B2-B19' Martensitic Transformation in NiTi Alloys - A Phase Field Study Thermodynamics Analysis in the Simulation Process of Fe Fe Isothermal Transformation's Grain Nucleation and Growth Study on the Pretightening Assembly Moving Beam of Open-Die Forging Hydraulic Press Phase Field Modeling for Grain Growth of Static Recrystallization of Deformed Alloys Crystal, Electronic and Magnetic Structure of Co and Ag Doped Rutile TiO2 from First-Principles Calculations The Realization of Numerical Control Machining of 2D Parts Based on MasterCam FBM Behavior Engineering for the Analysis and Verification of Processes Numerical Simulation of Multi-Track Laser Cladding Process Research on the Effects of Welding Sequence on Welding Residual Stress of High-Speed Train Based on SYSWELD Numerical Simulation of the Relation between Plasma Reflection and Keyhole Dimension in the Keyhole PAW Process Numerical Simulation of Welding for Box Beam Structure on Bogie of High Speed Train Research Materials of Chills Effect on the Solidification Process of ZM5 Shell Research on Methods of Sheet Blank Shape Optimization for Drawing of Complex Special-Shaped Boxes A Pseudo Inverse Approach with Kinematically Admissible Intermediate Configurations for the Axi-Symmetrical Cold Forging Modelling The Effects of Mn Addition on Microstructure and Properties in 6061 Aluminium Alloy Study on Infiltration Kinetics of High Temperature Self-Lubrication Composite by Pressure Infiltration The Simulation of the Influence of Honed Edge Radius on the Maximum Temperature in Drilling 42CrMo with K-Grade Carbide Drill Bit Formalizing Manufacturing Process Modeling Using Composition Trees Numerical Simulation of the Tunnel Oven with Fluent Software Phase-Field Simulation of Directional Solidification Microstructure Evolution in a Binary Alloy Directional Solidification Microsegregation and Concentration Analysis with Different Supersaturation Study on Hot Processing Maps and Flow Instability of 1235 Al Alloy Treated by Different Methods of Purification Chapter 13: Surface Engineering/Coatings The Effect of Active Packaging Film on the Quality of Dashehari Mango Fruits Performance Evaluation of SHY-99 Coating for Carbon Steel Water-Cooler Effect of Brazing Clearance on Microstructure and Strength of Welded Joint of 316L Stainless Steel Preparation and Characterization of Paclitaxel Imprinted Silica Nanoparticles Effect of Negative Bias Voltage on Corrosion Resistance of TiN Coating Deposited by MAIP Nb-C Alloyed Layer Prepared on TiAl Alloys by Plasma Treatments and its First-Principles Investigation Characteristics of Surface and Interface of Mercury-Stannum Reactive Wetting at Room Temperature Synthesis and Characterization of Lamellar Nanostructured Yttrium Films Using Lyotropic Liquid Crystalline Templates Study on the Distribution of Macro-Particles on Films Prepared by Magnetic Field Enhanced Arc Ion Plating Structure and Corrosion Resistance of Iron Coatings Containing Silicon Powders Semiconducting Behavior of Organic Polymer Coating during its Degradation in 50/00 Sulfuric Acid Solution Low Cycle Fatigue Behavior of Spray Formed Superalloy Rings Adhesive Bonding of Glass Fiber Reinforced Polypropylene Synthesis and Tribological Properties of MoSe2/C and MoSe2 Nanoflakes Effect of Phase Composition and Microstructure of Oxide Scale on the Corrosion Resistance of SS400 Hot Rolled Strip Repeated Impact Resistance of Cr-Mo Surface Alloying Layers on Ti6Al4V Alloy Novel Electrochemical Behavior of Organic Polymer Coating in Alkaline Solution The Study about Environmentally-Friendly Passivation Technology Process and Performance on Brass Surface Study of Corrosion Behaviour of Molybdenum Series Coatings on Galvanized Steel Effect of Thermal Input on Finite Element Predictions of Welding Residual Stresses Growth Characteristics of Pulse Electrodeposition Fe-Si Layer Study on Surface Modification of Ammonium Nitrate Development of CVD Diamond Thin Films on Titanium Substrate and Study their Tribological Behavior Microstructure and Oxidation of 55%Al-Zn-Si Hot-Dip Coatings Deposited on Low Carbon Steel at High Temperature Single Layer Brushite Coating onto Stainless Steel Substrate Using Dip-Coating Technique Effect of Pack Al Content on Growth Kinetics at 650 DegreesC of Ni2Al3 Coating Layer on Nickel-Electroplated Creep Resistant Ferritic Steels The Study of Acid Doped Polyaniline Anticorrosive Coatings Coupled Magnetic Field Enhanced Arc Ion Plating: Process, Plasma and Deposited Film The Tribological Characteristics of Polyimide Bonded Solid Lubricating Films under Different Lubrication Conditions Study on W-Mo-Dy Multi-Elements Diffusion Layer Feature-Based Volume Decomposition for Robotic Weld Deposition-Based Rapid Prototyping Simulation on Temperature and Residual Stress Field of Laser-MIG Hybrid Welding of A6N01-T5 Alloy Progress in Ice-Phobic Coating Electroless Deposition of Nickel on the Surface of Silicon Carbide Crucible from Alkaline Bath Electrodeposition and Hardness and Corrosion Resistance Propertie of Ni/Nano-B4C Composite Coatings Tribological Properties of NiCr-Cr3C2 - Ni / MoS2 Supersonic Plasma Sprayed Coating under Different Temperatures Electrochemical Studies on the Passivation Behavior of Cu-Ni-Fe Alloy in Borate Buffer Solution at pH 8.4 Study on Corrosion-Resisting Properties of High-Speed Arc Sprayed Zn-Al Alloy Coating in Caverns Effect of Phosphating Technologies on Corrosion Resistance of Phosphate Coatings on 6063 Aluminum Alloy Synthesis, Characterization and Corrosion Protection Properties of Polyaniline/TiO2 Nanocomposite Post-Weld Oxidation Behavior of AA6061 Al Alloy Preparation of Activated Carbon from Medical Waste Chapter 14: Mechanical Behavior and Fracture Formation Mechanism of Alumina Nanostrip Model Tests Study on the Bending Properties of the External Pre-Stressed Combination Box Girders with Corrugated Steel Webs Influencing Time Response of Nano Photoelectric on the Factors Films Study on Mechanism of Rock Fragmentation of TBM Disc Cutter Study on the Thermal Degradation Kinetics of Modified Chloroprene Rubber Adhesive Dedicated to Bonding UHMWPE and 45# Steel Study on Nano-SiO2 Measured by Atomic Force Microscope Influence of Inclusion on Fatigue Performance Evaluation of High Strength Transmission Shaft Steel Effects of Low-Voltage Pulsed Magnetic Field and Pouring Temperature on Solidified Structure of Al-4.5%Cu Alloy First-Principles Study on Structure and Stability of YAP Crystal Scttering of SH-Waves by Interface Semicircular Debonded Cylindrical Lining and Linear Cracks Originating at Edge of Lining Mechanical Properties of Carbon Cathodes during Aluminium Electrolysis Prediction of the Tertiary Structure of -Glycosidase from Aspergillus niger by Homology Modeling Critical Life Prediction of Ship-Borne Helicopter Metallic Dynamic Components Based on Corrosion Damage Fractals and Catastrophe Analysis of Fatigue Crack Propagation for Sample by Plastic Deformation The Cycle Measurement of Sulfur Blank Value with the CS-444 Infrared Ray Carbon Sulfur Analyzer Study on Surface Stress Measurement of Laser Cladding Fe-Based Alloy Coating Based on Rayleigh Wave Signal Analysis The Tribological Behaviour of Beryllium Copper Alloy QBe2 against 30CrMnSiA Steel under Sliding Condition Application of GM Yield Criterion in Plastic Zone of Mode Crack and Burst Pressure for Pipeline Influence of Solution Temperature and Time on Microstructure and Properties of A357 Alloy Discussion of the Evaluating Criterion of 400 DegreesC Low Cycle Fatigue Life under Multiaxial Stress States The Lattice Stability of Ti, Zr and Hf in an Ultra-Soft Pseudopotential Method of the First-Principles Experimental Investigation of the Phase Equilibria of Al-Zn-Ti System in Al-Rich Corner at 400 DegreesC The Electronic Properties of Al-, P-Doped and Al, P Co-Doped Boron Nitride Nanotubes Study on the Range of Freeze-Thaw of Surrounding Rock from a Cold-Region Tunnel and the Effects of Insulation Material Quantitative Process Risk Analysis Based on Dynamic Simulation of Gas Gathering Process Quantitative Analysis of the Content of Substituent Group in Difunctional Polysiloxane Fatigue Behavior of Cast Steel ZG20SiMn under Stain Control Mode Thermodynamic Study on CuInO2 Preparation by Solid Reaction Method The Studies on the Thermophysical Properties of Binary Systems of Neopentylglycol and the Derives The Cracks in the Residential Dwellings and their Treatment Strengthen Mechanism of Hard-Drawn Cobalt-Base Elastic Alloy Hydrogen Atom Adsorption on -Al2O3(0001) Surface from First Principles Microstructure and Mechanical Properties of TiB2/Al Composites Application of CAD/CAE/CAM Technology in Plastics Injection Mould Design and Manufacture Fatigue and SCC Behavior of Sensitized SUS304 Stainless Steel in Pressurized Hot Water at 7.3MPa and 288 DegreesC Measure of the Photosynthetic Efficiency of the Cabbage Leaves by Using Photo-Acoustic Tomography Spectroscopy Technology Study on Safety Assessment Methods of the Penstock of the High Head Hydropower Station Using the China Standard GB/T 19624-2004 An Optimization Method for Optimal Engineering Structure Design Combining Intelligent Optimization Algorithm and CAE Code Recrystallization Law of Ti-IF Steel During Annealing Process Surplus Fatigue Life Prediction of Diesel Engine Piston by the Equivalent J-Integral Approach Electrochemical Corrosion Behavior of Different Heat-Treatment Temperature Fe-Based Bulk Amorphous Alloy Effect of PEG on Stability of Alkalinity Silica Sol High Velocity Impact Damage Analysis for Glass Epoxy-Laminated Plates

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB08384494
• ISBN:
  • 9783037853092
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058