Advances in metallurgical and mining engineering : selected, peer reviewed papers from the International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2011), December 23-25, 2011, Beihai, China

著者

• International Conference on Chemical, Material and Metallurgical Engineering
• Zhu, Hongxi
• Wang, Linjiang

書誌事項

Advances in metallurgical and mining engineering : selected, peer reviewed papers from the International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2011), December 23-25, 2011, Beihai, China

edited by Hongxi Zhu and Linjiang Wang

（Advanced materials research, v. 402）

Trans Tech Publications, c2012

• : pbk.

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

The present 168 peer-reviewed papers are grouped into 8 chapters: Metallurgical Physical Chemistry, Ferrous Metallurgy, Metallurgy of Non-Ferrous Metals, Metallurgical Materials and Environmental Engineering, Mineral Processing, Mining Engineering, Mining Environmental Engineering, Mine Surveying and Safety Engineering. The contents will be of great interest to anyone working in these fields.

目次

Preface and Organizing Committee Chapter 1: Metallurgical Physical Chemistry Molecular Identification of a Strain Acidithiobacillus Ferrooxidans and its Biological Characteristics Kinetics of Leaching Vanadium with Sulfuric Acid from Carbonaceous Shale Containing Vanadium Influencing Factors and Mechanism of Cobalt Redissolution from Zinc Sulphate Solution Modeling Investigation of the Oxidation Kinetics of Copper and Aluminum Alloys Determination of Surface Tension of the Freeze Slag in Reaction Shaft of Flash Smelting Furnace Calculating Model of FetO Activity in Alkali-Containing BF Slag Recovery of Valuable Metals from Copper Slag by Hydrometallurgy Effect Evaluation of Inhibitor to Barium Sulfate and Strontium Sulfate Physical Simulation on the Liquid Metal Flow in FC-Mold of Slab Continuous Casting Mechanism of Precipitate Removal of Arsenic and Bismuth Impurities from Copper Electrolyte by Antimony Leaching Kinetics and Seperation of Antimony and Arsenic from Arsenic Alkali Residue Research on Detoxifying Treatment to Chromium Slag Comparison Study of the Electrochemical Behavior of Vanadate in NaOH and KOH Solutions Analysis of Factors Affecting Carbon Content Detection of Ferrochrome Alloy Using LIPS Method Detection of Carbon in Ferroalloy Using Internal Standard Method Based on LIBS Chapter 2: Ferrous Metallurgy Numerical Simulation of Flow-Induced Wall Shear Stress of a One Strand Tundish Design Experimental Investigation of the Viscosities of High Titanium Containing Slags with Low Mass Ratio of CaO to SiO2 Application of Data Mining in BOF Steelmaking Endpoint Control Isothermal Experimental Study on the Effects of Converter Bath Shape on the Melt Mixing Migration Principle of Chlorine in BF Production Causes and Countermeasures of Cracking in Cogging Process of 40Cr Bloom Application of Simulated Annealing Algorithm in Sintering Burdening Optimization Influence of Casting Speed on Solidification Process and Solidification Structure of Continuously Cast Bloom Effects of Operation Parameters on Desulphurization of Hot Metal with Passive Magnesium and Calcium Oxide in CSP Plant of WISCO High-Temperature Oxidation Kinetics of Galvalume-Coated Steel Sheet Influence of Hollow Electrode Ar-CH4 Co-Injection on Temperature in a Ladle Furnace with Alternating Current Supply MEST of Round Blooms with Different Foot Roll Pitch Designing for Peritectic Steel Casting Research and Application of the New Technologies on Blast Furnace at Shougang Qiangang Plant Numerical Simulation and Optimization Practice of Oxygen Lance for Converter Steelmaking Research on Thermal State of Mould Copper Plate with Different Heat Transfer Coefficient Study on the Influence Factor of the Caustic Calcined Dolomite Based Compound Desulfurizer Melt Point Study on Effect of Pressure to Nitrogen Solubility Limit in High Nitrogen Steels Process Analysis of Pb and Zn during Producing Iron Nuggets by Iron Bearing Dust Effect of Ladle Slag Modification on Slag Sticking to Snorkel and Rate of Slag Erosion Ore-Proportioning Optimization Technology in Pellet Process Based on Self-Characteristics of Iron Ores Phase Transformations and XRD Analysis of Austempered Ductile Iron Influce Mechanism on Compressive Strength of Coke in Blast Furnace Study on Fluid Flow in a Large Round Bloom Continuous Casting Mold The Effect of Time to Nitrogen Solubility in Steel with High Pressure and Bottom Blowing Nitrogen Nitrogen Control Technology for the Blowing Process of Combined Blowing Converter Study on Formation Mechanism of Frame-Shaped Segregation in 40Cr Wire Rod Rolled from Bloom Strength and Consolidation Mechanism of Green Pellets Containing Carbon Formation and Prevention of Sliver Defects on the Surface of Cold-Rolled Strip Phosphorus Distribution Equilibrium between CaO-FeO*-SiO2-P2O5(15%)-CaF2(B2O3) Slag System and Carbon-Saturated Hot Metal at 1573K Research on RDI+3.15 of Respectively Granulating Sintering Chapter 3: Metallurgy of Non-Ferrous Metals Acid Leaching of Vanadium from a Vanadium Residue Influence of Fe2O3 on Molten Slag Properties in Slag Splashing on Nickel Smelting Converter A Novel Method of Leaching Vanadium from Extracted Vanadium Residue Using Sodium Sub-Molten Salt Medium Study on the Removing of Ammonia Nitrogen in Ammonium Paratungstate Crystal Parent Solution Kinetics of Pressure Acid Leaching of Zinc from Zinc Silicate Ore Microstructure Evolution of A356 Aluminum Alloy Produced by Cooling Slope Method Evaluation of Melting Temperature of the Freeze Slag in Reaction Shaft of Flash Smelting Furnace Research of Biological Desilication Mechanism by Bacillus mucilaginosus GSY Material Ratio Optimization of Low Mass Ratio of Alumina to Silica of Calcium Aluminate Slag Based on Thermodynamic Calculation Method Nickel Loss during Iron Precipitation and Product Characterization Mechanism of Precipitate Removal of Antimony and Bismuth Impurities from Copper Electrolyte by Arsenic Zinc Removing from Aluminum Alloy by Vacuum Distillation Investigations of Alloying Elements and Rare Metals on the Hydrogen Content and Inclusion in Aluminum Alloy Upgrade Silicon Powder Prepared by SHS with Acid Leaching Treatment Effect of Polymer Surfactants on the Inhibition of Beta-Dicalcium Silicate Decomposition in Sodium Aluminate Solution Study of Tungsten Smelting Aqua System Heterogeneous Discipline Detection of Interface Displacement of Liquid Metal Using Magnetic Field Tomography Behavior of A356 Alloy in Semi-Solid State Produced by Mechanical Stirring Research of Prediction Method in Large Slope for Three Dimensional Object Deformation Chapter 4: Metallurgy Materials and Environmental Engineering Influence of Magnetic Field on as Industrial Waste Water Extraction Corrosion Behavior of Pb-Ca-Sn Electrodes for Copper Electrowinning Thermodynamics Analysis of Hot Metal Dephosphorization Flux Reaction Process Research Lifetime of Oil Film Bearing on High-Speed Wire Mill Based on Reliability Analysis Investigation of Cost Optimization of Pig Iron Fluid-Flow Characteristics and Critical Phenomenon in a Bottom Blowing Bath Study of Metallurgical Industry Smoke Characteristics and the Affect to the Performance of Electrical Precipitator Numerical Simulation on the Influence of Heating with Different Arrangement of Burners on the High Performance Hydrogen Bell-Type Annealers Research on New Thermal Reduction Process of Magnesium Preparation at Ordinary Pressure with Serpentine as Raw Material The Application of Breakout Prediction System with Thermal Imaging Monitoring Erosion Profile and Analyzing Reliability for Submerged Arc Furnace Thermodynamics of Pb(II) Complex Equilibrium in Pb(II)-NH3-NH4CI-H2O System Optimal Design of Heating System for Annular Furnace Visualization of Flow-Field between the Flapper and Nozzle in a Hydraulic Servo-Valve Formation of Protective Cr2O3 Scale at High Temperature and the Effect of Mass Transport in the Presence of Water Vapor Experimental Study of Sintering Flue Gas Desulphurization with Ferromanganese Ore Slurry Experimental Study on the Impact of Oxygen Lances on Bath Mixing in EAF Turbulent Flow of Molten Steel in Thin Slab Continuous Casting Mold The Coupled Heat and Mass Transfers in the Endothermic Chemical Reaction Packed Beds Generation and Emission Characteristics of Polycyclic Aromatic Hydrocarbons in Single Coal Coking Process Effect of Lance Nozzle Angle and Mixing Gas Blowing on BOF Process Study on Mechanism of Desulfurization by Spent Zn-MnO2 Batteries Road Performance of Concrete Incorporating Manganese Slag Combustion Performance and NO Emission in Industrial Furnace under Preheated Air Condition with Different Excess Air Ratio Large-Scale Rotary Steam Tube Drying System and Equipment for Copper Powder Numerical Calculation on Steel Coil during Annealing Process Prediction Model of Micum Strength for Iron Ore Sinter Improving Repeatability in Different Oxygen Probes at Low Oxygen Potentials in Molten Steel The Research on Breakout Prevention by Logical Judgement The Reason for Lose Efficacy of Electromagnetic Clutch Based on Mould Method Fixation of Thermocouple's Site and Established Value in Course of Desorption of Gold-Loaded Carbon Chapter 5: Mineral Processing Effect of Grinding Aids on the Fracture Energy of Mica Magnetic and Flotation: A Comprehensive Research for Recovery from Zinc Leach Residue Effects of Galvanic Interaction on Collectorless Flotation Behavior of Galena and Pyrite Investigation on the Beneficiation of Low-Grade Manganese Ore in Sichuan Study on the Influence of Precise Ball Size for Mineral Indexes Research on the Role of Pre-Oxidation in the Separation of Cu-Pb in the Presence of Potassium Dichromate The Research on Novel Technics for Fluorite Ore Containing Carbonate Minerals Industry Test on Phosphorus Removal and Direct Reduction of High-Phosphorus Oolitic Hematite Ore Study on the New Technique for Micro-Particle Cassiterite of Dachang Tailings Studies on the Effects of Particle Size in Direct Reduction Roasting of Limonite Ores Application of Small Molecular Inhibitors in Reconcentration of Iron Ore Tailings Study on Ultra-Fine Grinding and In Situ Modification of Taixi Super-Low-Ash Anthracite Experimental Study on Recovering Fine Cassiterite from Spontaneously Combusted Dachang Cassiterite-Polymetallic Sulphides A Flotation Technique for a Sulfide-Oxidized Cu-Co Mixed Ore Dynamic Analysis of a Novel Structure of Dry Coal Separator Study on Mineral Processing Flowsheet of a Certain Low Grade Pb-Zn Sulphide Ores Chapter 6: Mining Engineering New Developments and Applications of Coal Mine Pressure and Force Monitoring Technology Experimental Study on Permeability Characteristics of Soft Coal under Higher Confining Pressure Displacement Analytic Solution of a Deep Elliptical Tunnel in Transversely Isotropic Rock Mass Reliability Analysis on the Repaired Shaft Project Based on an Improved Response Surface Method Study on High Efficiency Mining Technology of Adjusting Mining Face Effect of CMCS on Cure Characteristics of Natural Rubber Comprehensive Evaluation of Blasting Effects Based on Variable Weight Method and Research on Fuzzy Decision Rock Failure Mechanism of Air-Decked Smooth Blasting under Soft Interlayer Analysis on the Stability of Yaoqiao Coalmine Ventilation System Propagation Mechanism of Coal Rock Fracture under Gas Pressure Underground Mining Method Selecting System Based on Fuzzy Theory The Observation and Research for Morphology and Microstructure of Pyrite Whiskers Synthesized by Hydrothermal Process Chapter 7: Mining Environmental Engineering The Application of Pre-Grouting in the Construction of Vertical Shaft Measurement and Analysis of Air Resistance on Baishan Coalmine An Application of GA on Gas Lift Parameters Optimization Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress - Strain Analysis Improvement of Evaluation Methods for Deep Fluid Diverting Agents The Settlement Prediction and Mining Suggestions of Zhaofeng Gob Area Research on Geosynthetics in Tailings Dam Reinforcement Injection Mode of CO2 Displacement in Heavy Oil Reservoirs Enhance the Process of Sedimentation for Copper Concentrate Pulp Using Combined Reagent Experimental Research on Characteristic of Particles Transportation in Low-Permeability Gas Reservoirs Experiment Research of Electric Analogy for Multi-Lateral Wells Considering Frictional Pressure Drop in Wellbore Virtual Simulation of Ground Scene of the Mining Area Chapter 8: Mine Survey and Safety Engineering Mechanical-Thermal-Chemical Coupled Research of Wellbore Stability in Jabung Oil Field, Indonesia Research of Drilling Complexities in Dabei Belt of Tarim Basin Finite Element Simulation of Deformation Process of 316L Expandable Slotted Base Pipe at Room Temperature Study on the Visual Prediction and Analysis Method of Mining Subsidence Production Simulate Analysis of Multiple-Fractured Horizontal Gas Wells Complex Activation of Coal Gangue to Al Compounds Improved Genetic Algorithm for Optimization of Multi-Source Pumping Tree-Type Pipe Network Study on Double-Frequency Composed Vibrating Compaction Method Based on Resonance and Antifriction Principle Experimental Study of Organic Pollutants in Waste Water from the Coking Plant Adsorbed by Organobentonite The Dynamic Finite Element Analysis of Shearer's Running Gear Based on LS-DYNA Study on Diameter Distribution of Natural Secondary Forest Experimental Study on Decarburization in Heavy Rail Manufacturing Process Electromagnetic Methods for Shale Gas Exploration in Southern China Mould Parts Design Based on Knowledge Fusion of NX A New Method of Checking Anti-Floating Stability of Buried Horizontal Tank Feafure Research of Movement and Deformation to Surface of Earth due to Repeadly Mining Study on the Relationship between the Safety Width of the Distress Zone and the Gas Outburst Danger Study on Measuring Technique for Metal Tank's Oil Temperature and it's Level Electrochemical Measurements of Corrosion Inhibition of Mild Steel in Sulfuric Acid by BIMGCS12-3 Numerical Simulation of Shale Gas Production Study on Engineering Education Training Mode of the Experience-Orientation A New Nodal Analysis Method of Artificial Lifting System Characteristics of the Interfacial Wave Velocity on the Liquid Film of Annular Flow for Gas-Oil-Water Three-Phase Flow in a Horizontal Pipe The Re-Design of Centrifugal Classifier Numerical Simulation of Liquid-Solid Two-Phase Flow Reflux in Particle Impact Drilling System Back Analysis of Rockfall Trajectory and its Parameters Performance Simulation Research of Electronic Controlled Gasoline Engine Influence of Ultrasonic Wave, Argon Blowing and its Coordinated Treatment on the Nitrogen Content in Low Carbon Steel Study on Hazard Effects of Gas Explosion in Coal Laneways Grain Refinement of Direct Chill Cast 7050 Aluminium Alloy with Low Frequency Electromagnetic Field Optimum Design of Coalbed Methane Reservoir Development Strategies through Numerical Simulation The Impact on Athlete Health of Sulfate, Nitrate and Ammonium in Atmospheric Aerosol in the Urban Area of Yangtze River Delta, China A Study on Tunnel Smoke Control Strategies by Experiment and Numerical Simulation

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB08384938
• ISBN:
  • 9783037853108
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xix, 879 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058