Applied mechanics and mechanical engineering II : selected, peer reviewed papers from the 2nd International Conference on Applied Mechanics and Mechanical Engineering (ICAMME 2011), October 8-9, 2011, Sanya, China
著者
書誌事項
Applied mechanics and mechanical engineering II : selected, peer reviewed papers from the 2nd International Conference on Applied Mechanics and Mechanical Engineering (ICAMME 2011), October 8-9, 2011, Sanya, China
（Applied mechanics and materials, v. 138-139）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
These proceedings of the International Conference on Applied Mechanics and Mechanical Engineering (ICAMME) cover the subject areas of: Acoustics and Noise Control, Ballistics, Biomechanics, Biomedical Engineering, CAD/CAM/CIM, CFD, Composite and Smart Materials, Compressible Flows, Computational Mechanics, Computational Techniques, Dynamics and Vibration, Energy Engineering and Management, Engineering Materials, Fatigue and Fracture, Applied Mechanics, Automation, Mechatronics and Robotics, Fluid Dynamics, Fluid Mechanics and Machinery, Fracture, Fuels and Combustion, Aerodynamics, Textile and Leather Technology, Transport Phenomena, Tribology, Automobiles, Automotive Engineering, General Mechanics, Geomechanics, Instrumentation and Control, Internal Combustion Engines, Machinery and Machine Design, Manufacturing and Production Processes, Marine System Design, Materials Science and Processing, Mechanical Design, Health and Safety, Heat and Mass Transfer, HVAC, Material Engineering, Mechanical Power Engineering, Mechatronics, Noise and Vibration, Noise Control, Non-Destructive Evaluation, Nonlinear Dynamics, Oil and Gas Exploration, Operations Management, PC Guided Design and Manufacture, MEMS and Nanotechnology, Multibody Dynamics, Nanomaterial Engineering, New and Renewable Energy, Plasticity Mechanics, Pollution and Environmental Engineering, Resistance and Propulsion, Robotic Automation and Control, Solid Mechanics, Structural Dynamics, Precision Mechanics, Mechatronics, Production Technology, Quality Assurance and Environmental Protection, System Dynamics and Simulation, Turbulence, Vibrations, etc. This volume offers a veritably encyclopedic coverage of the current state of the field of mechanical engineering.
目次
Preface and Organizing Committee
Chapter 1: Applied Mechanics Mechanical Engineering
Critical Force Analysis of a Cantilever Column Subjected to a Subtangential Follower Force and a Vertical Force
Dynamic Analysis and Optimization of Automatic Tape-Laying (ATL) Machine for Cylinder Components
Proposal of a Masticatory Robot for Analysis of Jaw Movements
Optimization of Plate with Partial Constrained Layer Damping Treatment for Vibration and Noise Reduction
Numerical Simulation of Air Flow during Air Sparging Remediation
Designing and Experiment Study on Front Impact Attenuator for Formula SAE Racecar
Distributed Control of Spacecraft Formation Using Improved Cyclic Pursuit with Beacon Guidance
Numerical Solution of Dynamic Responses of Moving Load on Ice Sheet
On an Optimal Linear Control of a Chaotic Non-Ideal Duffing System
Optimal Motion Planning for the Teaching Experimental Mobile Manipulator
Analysis for a Support Structure of a Horizontal Axial Tidal Current Energy Conversion System
Experimental Research on Force/Position Control of a Wire-Driven Parallel Rehabilitative Robot
Influence of Attachment Rigidity on Stress Analysis
Numerical Model of Wave Flume
Numerical Simulation of Air-Modulated Speaker with a Time-Dependent Shape Vocal Tract Model
Supercavitating Vehicle LSSVM Multiple Intelligent Control
Numerical Simulation of Flow Field around Amphibious Vehicle Based on CFD
Non-Linear Dynamics of a Flexible Multi-Rotor Bearing System with a Fault of Parallel Misalignment
Collision Simulation Analysis for Space Flexible Probe-Cone Docking Mechanism
Research on a New Cooling System of Airborne Electronic Equipment
An Experimental Study on Rotational Coriolis Force upon Single Particle in Vertical Spiral Duct
Energy-Based Inverted Equilibrium of the Axially Symmetric 3D Pendulum
Discussion on Safety Criterion of Structural Response to Blasting Vibration
Ice Accretion Prediction for Single Airfoil and Multi-Element Airfoil
Analysis of Dynamic Load Level of High-Speed Heavy Vehicle Imposed on Uneven Pavement
Effects of Torsional Stiffness and Preload on a Hopping Robot with Two-Segment Legs
Study of Stiffness Design of Caliper for Reducing the Weight of an Electro Wedge Brake
Computations of Homeomorphisms in the Contact Dynamical Systems
The Application of Finite Element Methods to Study Force Transducer Anti-Deviated Load Characteristics
Subdivision Method for Mold Cavity Surface Based on the Improved Image Direction Information Measure
Effects of Fluid-Solid Interaction for Hydraulic Structure Seismic Response
Numerical Simulation of Coal Mining Excavation Based on Discontinuous Deformation Analysis
Application Research on Elastomer Damper in Tracked Vehicle Suspension System
The Optimum Design of Composite Laminated Plate Based on Spline Finite Element Analysis
Top-Down Modularization Using Extensible Skeleton Model
Structural Response Analysis of Beijing Yin-Tai Center Building under Varying Ground Motions
Computational Investigation of the Slat Blowing Control for High-Lift Airfoil
An Investigation of Drag Reduction on Gurney Flaps by an Three-Element Airfoil
Folding Umbrella Framework Destruction Force Analysis Based on Virtual Prototype
Experimental Study on Optimization Design of Variable Diameter Pile-Raft Foundation
The Harmonic Response Analysis of Engine Block Based on Modal Analysis
Optimization Design of Double Wishbone Independent Suspension Based on ADAMS
A Finite Element Model to Evaluate Airport Flexible Pavements Response under Impact
Integral Slide Mode Variable Structure Control of the Machine Angular Position Servo System with Friction
Lie Symmetries for Discrete Electromechanical Dynamical Systems with Irregular Lattices
Implicit Generalized Predictive Control of Hip-Joint Rehabilitation Training Device Driven by Pneumatic Muscle Actuator
Design and Experimental Research of Urethra Valve of Bladder Power Pump
Automatic Design of Gear Transmission Based on Visual Fortran and AutoCAD
Structural Study of Arch Bridge with a Span of 600m Part I: Trial Design
Structure Study of Arch Bridge with a Span of 600m Part II: Measures to Improve Mechanical Performance
Energy-Efficient Tracking Control for Automatic Guided Vehicle
The Numerical Simulation of the Solar-Air Dual-Source Heat Pump System
Research on Transmission Efficiency of Cycloid Cam Speed Reducer
Methods Determining the Weights of Characteristics in Mechanical Products Design on Case-Base Reasoning
Fuzzy Interference Referee Model of Fault Diagnoses for Automobile Engine
The Study on Soft Starting of Belt Conveyor Using Two-Input-Outlet Fuzzy Control Model
Design of Dynamic Control on Underwater Vehicle
Study on Integrated Framework of Mathematical Mechanization for NC Trajectory Planning
Dynamics Simulation of Spacesuit Mobility Measuring Manipulator Based on Matlab
Rock Burst Analyse in Qirehataer Diversion Tunnel
Modeling and Analysis of the Supporting Force of Water Strider's Legs
The Study on the Mechanical Property of the Top-Seat-Angle with Double Web-Angle Connection
Experimental Research on the Influence of Moisture Content on the Performance of Desulfurization Plasterboard
Finite Element Study on Influence of Door and Window Openings on Temperature Effect of Masonry
Numerical Simulation of the Water Entry of Two-Dimensional Body with Flow Separation
Reliability Analysis on the Key Components of High-Power Low-Speed Diesel Engine
Principal-Component Calculation of Stray Light for Infrared Detection
Study on Noise Control of Fan with Air Suction
Experimental Modal Analysis of Fan Vibration Frequency
Mixed Method to Calculate the Sluice Plate on Complicated Foundation
Stable Nonlinear Control Allocation for Aircraft with Multiple Control Effectors
The Solution of the Structural Reliability Index Based on SAPSO
Setting the Model of Iced High-Voltage Transmission Tower-Line System and Research its Dynamic Characteristics
Design and Research of a New Highway Median Guardrail Based on ANSYS
Aerodynamic Design and Analysis of Propeller for Solar Powered Unmanned Aerial Vehicle
Dynamics Analysis of Multi-Degree-of-Freedom Motion Simulator Based on Hamilton Method
Temperature Field of Multi-Wells Aquifer Thermal Energy Storage in Sanhejian Coal Mine
Seismic Stratigraphy and Seismic Geomorphology: Insights on Characterization of a Carbonate Reservoir
Analysis on Flight Dynamics of Solar UAV with Multiple Propulsion Systems
Numerical Simulation and Analysis of Motion Process of Incompact Soil along Slope
The Secondary Development of Nonlinear Viscoelastic Constitutive Model Based on ABAQUS
Steady Air Injection Flow Control in Centrifugal Compressor
Fracture Mechanics Analysis of Hydraulic Cracks in Asphalt Pavement
Model Test Investigation on a J-Lay System Designed for Deepwater Pipeline Installation in South China Sea
Study and Application of Seismic Attributes on Coal Seam Thickness Prediction
Delay Independent Control of Bilateral Teleoperation Based on LMI
Mechanical Analysis of Filter Cylinder of Containment Sump Strainer
The Reanalysis Method of Weighted Generalized Inverse for Topological Modification of Plane Structures
Study on Rollover Security Based on the Bus Middle Body Frame
A Novel Sliding Mode Motion Control for Parallel Mechanism of Virtual Axis Machine Tool
Determination of Critical Speed in Ice Breaking by Air Cushion Vehicle
Aerodynamic Optimization Design of Compressor Cascade Based on Parallel Multi-Objective Genetic Algorithm and Artificial Neural Network
Performance Research on the High-Altitude Valve of an Aero-Engine Ventilation System
Study of Eliminating Calculation Errors in Large-Strain Measurement with Strain Gauges
Algorithm Establishment with Model Experiment for Continuous-Wave Functional Near-Infrared Spectroscopy
The Control Method for Positioning Bed of the Body Gamma Knife Based on the Breathing Sensors
Chapter 2: Material Science and Engineering
A Technology Based on Image Processing for the Bridge Crack Measurement
The Investigation of Temperature Effect on Dynamic Characteristics of Rubber Isolator
Cotton Fiber-Reinforced Polypropylene Composites
Experimental Study on Vibration Absorption Characteristic of Non-Obstructive Particle Damping Beam
Application of Modal Analysis in Local Damage Diagnosis of Steel Beam
A Method of Tool Breakage Detection in CNC High-Speed Milling
Test to Characterize the Machining Strength Property for the AISI 316L Steel
Preparation and Characteristic Measurement of Born Doped Diamond Film Electrode on Tantalum Substrate and its Properties for Degradation of High COD Wastewater
The Design of the Multi Fitness Function Office Chair
TiCu-Based Bulk Metallic Glasses Exhibiting Large Compressive Plastic Strain
Functionalized Ionic Liquids as Lubricants for Steel-Steel Contact
Acoustic Emission Study of Corrosion Fatigue and Fatigue for API 5L X70 Gas Pipeline Steel
Crack Paths in 2198-T8 Offset Hole SE(T) Plates with FSW Jointed under Fatigue Load
Residual Stress Effects on Crack Growth in Nugget of Al-Li Alloy 2195-T8 Friction Stir Welded Joints
Damage Tolerance Properties of 2198-T8 Integral Fuselage Panel between Double Friction Stir Weld Joints
The Dynamic Strength Calculation on the Reel Fulcrum Bearing and Gear Box Bed Plate of Crane Based on ADAMS and Mechanical Property
Study on the Simulation Model and Characteristics of High-Speed Grinding for Ceramics
The Liquefaction Risk Analysis of Fine Sand Filling Subgrade
Spline-Based Finite Element Analysis in Composite Laminates Mechanical Properties
Design and System Level Simulation of Double-Mass Silicon Micro Gyroscope
Research on Dynamic Characteristics of Gear in Ultrasonic Gear Honing
Natural Boundary Integral Method for Irregular Plate Problems
Fourier Cosine Differential Quadrature Method for Beam and Plate Problems
Green Quasifunction Method for Bending Problem of Clamped Orthotropic Trapezoidal Thin Plates on Winkler Foundation
Studies on Dynamic Mechanical Properties of Glass Fiber Reinforced Silica Aerogel
Study on Quick Changing Device of Power Battery of Electric Vehicle
Application of Modern Emission Spectrography in Oil Monitoring
Investigation and Simulation on Amorphous Formation and Growth
Microstructure and Hardness of the ZrO2/Ni60A Composite Coating Formed by Feeding Powder Laser-Clad on Circular Surface
A Finite Element Model of Roll-Over Protective Structures for Wheel Loader Frame
Experimental Modal Analysis of Large Vibrating Screen with Hyperstatic Net Beams Structure
Numerical Simulation of B-Pillar's Hot Press Forming Process and its Shape Optimization
Research on the Warm Deep Drawing of AZ31 Magnesium Alloy Sheet Based on DYNAFORM
Application of Finite Element Method in Submarine Cable Fiber Excess Length Analysis
Numerical Analysis on Short-Circuit Force Parameters of Windings for Power Transformer
Numerical Investigation of Type IV Shock Interaction and its Active Control
3D FEM Simulation Analysis for the Residual Stress to GTAW Welded Joints Based on Adscititious Magnetic Field
Study on the Trial-Manufacture of a Large Discharge Emulsification Pump's Crankshaft
A Grey Correlation Model for Analyzing Ultimate Bearing Capacity of Large Diameter and Super-Long Pile
The Analyses for Natural Frequency of Laminated Plate Using an Improved Higher-Order Theory
Research on the Vibration Attenuation of Heavy-Duty Machine Tool Based on Non-Obstructive Particle Damping (NOPD)
Research on Modeling and Simulation of Sonar Performance Using Simulink
Effect of Fiber Diameter on Fatigue Strength of Fiber Reinforced Concrete and its Design
Tensile Behavior Prediction of Steel Plates with Pitting Corrosion
On Studying Surface and Nanomechanical Properties of Ti-O Films by Alkali Treatment
Effect of Niobium Addition on the Mechanical Properties of Ti Stabilized Interstitial-Free Steel
Low Cycle Tension-Tension Fatigue Properties of 316L Stainless Steel Thin Sheets
A Study on the Aerodynamic Safety of Skirt Board Structure on Maglev Train
Material Flow Behavior during Friction Stir Welding of Copper and Steel
Plasma Assisted Flame Holding of a Propane Jet
Characterization of Friction Stir Welded Joints in TA15 Titanium Alloy Plates
Active Control of Sound Transmission Trough a Double Wall Structure
The Analysis of Matching Detection Based on Dielectrophoresis Effects
Three-Dimensional Virtual Assembly of Automatic Fuel Measuring Device of Diesel Engine Test Bed Based on VRML
Preliminary Research on the Aerothermoelastic Behaviours of Sweptback Wing
Numerical Simulation on the Infrared Radiation Characteristics of Ejector Nozzle Based on RMCM
Research on Mesh Generation Effecting Resistance Calculation
Comparison of Resonance Characteristics for Two Metal Nano-Optical Antennas
Enhanced Cellular Function of Human Vascular Endothelial Cell on Poly ( -caprolactone)/Gelatin Coaxial-Electrospun Scaffold
Preparation and Characterization of Mno.5Zno.5Fe2O4 @Au Composite Nanoparticles and its Anti-Tumor Effect on Glioma Cells
Production of Microbial Oils Fermented by Two-Strains with Corn Stalk
Design and Implement of Computer Aided Instruction System for Statistical Quality Control Based on Artificial Intelligence Technology
Chapter 3: Chemical and Biomedical Engineering
Studies on Optimum Conditions of Synthesizing Theaflavins by Using Bio-Enzyme Method
Comparison of Two Protein Extraction Methods for Tea Residues
Patient-Specific Finite Element Model of a Spinal Tumor for Thermal Ablation
Microinjection Molding of Polymer Micromixers for Biomedical Application
Analysis of Soluble Fraction with Carbon Disulfide/tetrahydrofuran of Erdos Coal by FTIR and GC/MS
Study on Fluidization Characteristics of Chinese Herbal Medicine Waste in a Fluidized Bed Reactor
Experimental Study on Pollution Emissions of the DLN Combustor
Study on Combustor Outlet Temperature Field of Gas Turbine
EEG Characters Research to Different Personality People
Chemical Constituent and Antimicrobial Activity of Essential Oil from Fragrant Loquat and Common Loquat
Effects of AOC and Phosphorus on Bacterial Growth under Oligotrophic Condition (1)
Effects of AOC and Phosphorus on Bacterial Growth under Oligotrophic Condition (2)
Purification and Concentration of C-Phycocyanin from Spirulinaplatensis Using Aqueous Two-Phase System
Determination Method of Organophosphorus Pesticide Residues in Fishs by GPC-GC-PFPD
Chemical Modification of -Cyclodextrin-g-Chitosan and its Adsorption on Pb2+
Effects of Light-Initiation Agent on Mechanical Properties of Light-Cured Nano-Hydroxyapatite Composite for Dental Restoration
Extrusion Process Optimization for Soluble Dietary Fibers Production from Agrocybe Cylindracea Using Response Surface Methodology
Determination and Evaluation of Aluminum Contents in Flour Products
Enhancement Effect of CTAB in Dye Wastewater Treatment by Bentonite
Solubilities Prediction and Partial Molar Volume Calculation for 2-Butanol and CO2 Binary Mixture at High Pressure
The Co-Metabolic Biodegradation Kinetic Models of a Chlorinated Alkene with Mutagenicity, Carcinogenicity and Teratogenicity by Two Strains of Aerobic Bacteria
Study on Eliminating Three Nitrogen of Recycling Aquaculture Using the New-Style Incorporated Aquarium
Theoretical Study on the Antioxidant Activity of Alkannin and its Derivatives
A Contact-Free Monitor of Human'S Vital Signs
Co-Immobilized Lignin Peroxidase and Manganese Peroxidase from Coriolus Versicolor Capable of Decolorizing Molasses Waste Water
Study on Synthesis and Properties of Phenols Polymer Syntan Catalyzed by Enzyme
The Impact of Tetrahydropalmatine on 99Tcm-MIBI Uptake of Human Breast Cancer MCF-7 Cell
Effect of Etching Temperature on the Growth of Silicon Nanowires
Preparation of Dextran Modified Superparamagnetic Iron Oxide Nanoparticles Based Immunoprobes
Sleep Stage Classification Based on EEG Signals by Using Improved Hilbert-Huang Transform
Comparative Study of Droplet-Nuclei with Pathogen and CO2 Distribution in Infectious Isolation Room
Disodium Salt of 2-(5-phenyl-1, 3, 4-oxadiazol-2-yl) Phenyl Phosphate as a Fluorescent Probe for Determination of ALP
Heart Sound Clustering Based on Supervised Kohonen Network
Humidity Sensor Based on ZnO Nanorods Assembled by Dielectrophoresis
Preparation and Characterization of Electrochemical Glucose Sensor Based on Nickel Electrodes Supported by Silicon Microchannel Plates
In Silicon Cloning and Bioinformatics Analysis of an Eukaryotic Initiation Factor 4E Gene from Grimmia pilifera
Synthesis of Juglone and its Derivatives
Production of Fermentative Hydrolysate with Antioxidative Activity of Extruded Corn Gluten Meal by Bacillus natto
Assessing Soil and Plant Pollution by Abandoned Rural Waste Dumping Sites in Ningbo, China
Optimization on Extraction Technique of Soluble Soybean Polysaccharide
Research the Equilibrium Distribution of Puerarin in Aqueous Two-Phase Combine with Temperature-Induced Phase Separation EOPO/ K2HPO4 /Water Systems
Cloning and Expression of TLR4-EGFP Fusion Protein in HT-29 Cells and the Visualized Interaction between TLR4 and Enteropathogenic E.coli
The Anti-Inflammatory Activity of Pentacyclic Triterpenes In Vitro
Biomedical Imaging and Visualization Model of Mitochondrial Dysfunction and Oxidative Stress in Alzheimer Disease
Optimization of Xylanase Production by Trichoderma reesei JL-1 Using Response Surface Methodology and the Enzymatic Properties
Extraction and Antimicrobial Activity of Total Flavones from Zanthoxylum nitidum
Production of a Fibrinolytic Enzyme from Coprinus comatus YY-20
Synthesis,Characterization, and Antibacterial Activity of Quaternized of N-Aromatic Chitosan Derivatives
Enhanced Production of Mycelia by the Medicinal Mushroom Cordyceps militaris Using Plackett-Burman Design and Response Surface Methodology
Transparent-Component-Decimation Method for Studying the Optical Transmission of One Kind of Aperiodic Superlattices
Advances on the Pharmacology Research of Active Component in Humic Acid
New Progress in Medical Research of Bio-Humic Acid
P2P Incentive Mechanism Based on Static Game of Incomplete Information
Research on Chinese Regional Environmental Management Efficiency Based on DEA and Malmquist Index
Ultra-Precision Machining Technology Based on Dynamic Minimum Thickness of Cut for Machined Single Crystal Materials
Surface Texture Evaluation of Micro-WEDM
Experimental Investigation of the Mold Surface Roughness Effect in Microinjection Molding
Laser Smoothing Device for Airborne 3-D Focal Imaging LiDAR
Study on Fractal Elastic Damage Constitutive Law for Concrete Material under Static Load
Study on Theoretical Elasticity and Plasticity Model of the Stock Price Based on Material Distortion Theory
Effects of Sb2O3 Addition on Dielectric Properties of Barium Strontium Titanate Based Ceramics
A New Method for Multi-Models Estimation
The Preliminary Study on Air-Jet Spinning Spun
Complex Mechatronic System Reliability Optimization Using Hybrid Genetic Algorithm
「Nielsen BookData」 より