Materials and computational mechanics : selected, peer reviewed papers from the 2011 International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2011), November 18-20, 2011, Shenzhen, China

著者

• International Conference on Applied Mechanics, Materials and Manufacturing
• Zhang, Huixuan

書誌事項

Materials and computational mechanics : selected, peer reviewed papers from the 2011 International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2011), November 18-20, 2011, Shenzhen, China

edited by Huixuan Zhang ... [et al.]

（Applied mechanics and materials, v. 117-119）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection of peer-reviewed papers describes the latest advances in, and applications of: basic mechanics and research methods, dynamics and vibration, solid mechanics, fluid mechanics and thermodynamics, biomechanics and environmental mechanics, new materials and advanced materials, functional materials, materials processing technology, welding and mechanical connections, fracture, etc. the work is thus a usefully up-to-date guide to these topics.

目次

Preface and Organizing Committee Chapter 1: The Basic of Mechanics and Research Methods Research on Control Effectiveness of Semi-Active MR-TMD to some Coal Gas Manufacturing Plant Direct Tensile Strength Measurement of Concrete Dynamic Simulation and Test for the Valve Train Dynamics Occluded Object Tracking Based on Mean Shift and Accumulation Error Suppression Studies on Stability of Peanut Mango Milk Application Study of Wa Nationality Totem Symbol of Lincang in Modern Furniture Design Rolling Element Defect Diagnosis Based on Local Mean Decomposition Study on the FCG Prediction Model Based on Material's LCF Damage Study on Composite Model for Vibro-Replacement Stone Column Foundation by Finite Element Method The Application of Interval Analysis Method in the Stability Analysis Stress Distribution Rule of Reinforced Concrete Specimen under Uniaxial Tension Analysis on Long-Span Bridge Seismic Response in Multi-Dimensional and Multi-Point Mode Experimental Study on Impact Compression and Spliting of Granite Research on Lower Muscle Strength Feature for Elite Speed Skaters in High Speed Gliding Effect of the Stress Balance on Determination of Rock Dynamic Fracture Toughness Using Holed-Cracked Flattened Brazilian Disc Preparation of Ni-Coated SiC Ceramic Composite Powder by Electroless Plating Corrosion Behavior of Electroless Deposited Fe-Zn Coating Study on the Vibro-Acoustic Characteristics of a Vibration Isolation Mass Structure with Composite Braces New Results of Buckling and Postbuckling Behaviors for Fiber-Reinforced Composite Shear Deformable Anisotropic Laminated Cylindrical Shell Subjected to Torsion Simulation Analysis of the Tensile Process on Sheet Sample Calculation and Analysis of 2-D Thermal Stress Field in Induction Motor with Compound Cage Rotor under Different Load The Sharp Indentation for Identifying Constitutive Relationship of Metallic Materials Evaluation of the Steep Slope Stability Based on Theory of GPS Monitoring Analysis Difference and Application of Matrix Displacement Method and Finite Element Method in the Truss Structure Analysis Mechanism of Work Hardening of Mn13 after Asynchronous Cold Rolling Recent Developments of Material Deformation Measurement Detection for the Automatic Transmission of the Tractor Based on Spectroscopic Technology Edge Drop Constituent Analysis of Cold Rolled Strip The Existence of Positive Periodic Solution for a Class of Functional Differential Equation with Multi-Delays Research on Influence of Flexible Parts' Rigidity to Passenger Car Exhaust System's Modal Design and Finite Element Analysis in Hydraulic Retarder Bracket Based on ANSYS Study on Stability of High Embankments under Complicated Stress Conditions Kinematical Analysis on the Technology of Overhead Smash between Badminton and Tennis Studies on MAaximum Hydrostatic Testing Pressure for New Pipeline Noether Symmetry and First Integral of Discrete Nonconservative and Nonholonimic Hamiltoinian System Response Analysis on Asymmetric Twin Tower Building with Large Bases Subjected to Seismic Action One Numerical Simulation Method and its Applications for Fatigue Crack Growth Carbonation of High Strength Concrete Chapter 2: Dynamics and Vibration Numerical Simulation of Cu-Cu Interface Thermal Resistance by Utilizing Laser Photothermal Method Seismic Control Research of Longitudinal Floating Bridge Based on MR Damper Model Test Research of the Influences of Rock-Fall Impaction on Accelerations of the Cut-and-Cover Tunnel Structure Structure Design and Finite Element Analysis of Airborne Equipment Integrated Mounting Shelf Microstructure and Mechanical Properties of a Rapid Directionally Solidified Ti47Al Alloy An Impact Analysis of Turbine Guide Bearing Stiffness on Rotating Parts' Transverse Vibration Characteristics Dynamic Responses of a Simply Supported Bridge to Moving Vehicle Loads Research on Technological Parameters of Laser Cladding Study on Flow-Induced Vibration Characteristics of Hydraulic Hoist of Large-Span Upwelling Radial Steel Gate Dynamic Analysis of Axially Loaded Beams under Arbitrary Transverse Force Mechanics of Hairspring in Mehanical Watch Movement Effects of Process Conditions on Mechanics Properties of Micro-Foaming PP/GF Composites Structural Fatigue Analysis on Expansion Joints of Diversion Penstock of Hydropower Station Study on Properties of Al2O3 -CaO-CaF2 Slag System A Novel Simplified and High-Precision Inverse Dynamics Model for Magneto-Rheological Damper Kinetic Analysis of Hydraulic Mount of Vehicular Engine Based on Fluid-Structure Interaction Finite Element Analysis of Ice-Cone Interaction Nonlinear Seismic Analysis of Masonry Infilled RC Frame Structures Stability of a Supported Cylinder in Axial Flow The Numerical Study of Concrete Mesostructures' Effect on Ballistic Responses in Penetration Problems Study on Model of Thermal Crown of Single-Stand Irreversible Foil Mill Control Final Cooling Temperature on High Strength of the Pipeline Radio Yield Influence Structure and Property of ZnO Content with Tb3+ Doped Zinc Aluminum Phosphate Glass Study on in-Plane Bending Vibration of a Combined Ring-Beam The FOPS Design of Wheel Loader Cabin Based on Topology Optimization An Investigation into the Earthquake Reaponses of Special-Shaped Arch Bridges Sol-Gel Derived Titania/Hydroxyapatite Layer on Titanium Substrate Temperature Distribution and Operating Efficiency in Rectangular Cold Crucible Directional Solidifying Ti46Al0.5W0.5Si Alloys Aero-Elastic Active Control Modeling via Improved POD Method The Noise-Induced Chaotic Transition in a Vibro-Impact Oscillator Study on Useful Concrete Elastic-Plastic Constitutive Model Numerical Simulation of the Reverse Plugging of a Thin Plate Irradiated by Long Pulsed Laser Effects of Rare Earth La on Microstructures, Mechanical Properties and Sliding Wear Behavior of High-Aluminium Zinc Foundry Alloy ZA30 Research about Numerical Integration Method for Structural Dynamic Response in Real Time on-Line Test Response of Two-Disk Rotor with Squeeze Film Dampers and its Variation with Parameters Experimental Study on CFRP-Bonded Steel Plates with Thickness Reduction Using Underwater Epoxy Research on Interface Structure and Fracture Mechanism of Diffusion Bonding of Titanium Alloy/Cu/Stainless Steel Comprehensive Recycling of Construction Waste Dynamics Analysis of the Bar-Type Piezoelectric Motor Stator Evaluation of the Mechanical Properties of Copper Thin Film and Copper Bulk at the Nano-Scale by Nanoindenter Grain Growth Behaviors of Multicrystalline Silicon during Cold Crucible Continuous Casting Investigation on Mechanical Properties of Pulsed Nd:YAG Laser Welding on AISI 304 Stainless Steel to AISI 1008 Steel Reinforcement Phase of Situ TiC with the Laser Surface Alloying on Steel C1045 Chapter 3: Solid Mechanics The Performance and Strength Mechanism of Stabilized Aggregate Containing Special Cement with Desulfurization Residue The Continuity and Inheriting of Historical Context of Architecture during Urban Renewal in Chongqing Static Stress and Modal Analysis of the Impeller of the High-Pressure Low-Flow Pump Rate-Dependent Behavior and Constitutive Model of Polycarbonate at Strain Rate from 10-5 to 103 S-1 Three Dimensional Cosserat Continuum Model and its Application to Analysis for the Cantilever Beam Seepage Analysis for Dashiban Landslide Applied Multi-Day Rainstorm once in Hundred Years Analysis of Fuzzy Stress and Strength Reliability of Double-Layer Pressure Vessel Elastic Waves of Anisotropic Saturated Porous Solids with Thermal Effect Green Quasifunction Method for Bending Problem of Clamped Orthotropic Thin Plates with Trapezoidal Boundary Shape The Dimensionless Load Separation Method Used for Fracture Toughness Test and its Application Chemical Solidification Stress Calculation and Experiment of Concrete-Filled Steel Tube Three-Dimensional Viscoelastic Interactions of a Center of Dilatation with a Penny-Shaped Interfacial Crack Crack Propagation of Jointed Rock and Application Investigation on Spb Method Based on Nondimensional Load Separation Principle for SEB and CT Specimens Scalability Study on Large-Scale Parallel Finite Element Computing in PANDA Frame A Yield Criterion for Pressure-Sensitive Materials Research on Parametric Design Platform of Gear Based on Pro/E Analysis of Multiaxial Low Cycle Fatigue Life for Single Crystal Ni-Based Superalloy Based on Two-Phase Unit Cell Model The Reliability Analysis of Leaf Spring Based on PDS Effect of Ultrasound Treatment on Properties of Soy Proteins Film Design of the Microfluidic Chip of Oil Detection The Mechanical Analysis of Tubing in Deep Gas Wells in Volcanic Reservoirs The Application of Dynamic Compaction Techniques Combining Plastic Drainage Plate to Improve Soft Soil Foundations in a College Numerical Simulation of the Collapse of Stepped Circular Tube Subjected to Oblique Load Fuzzy Comprehensive Evaluation of Cutting Parameters when Milling Plane Features of Aeroengine Structure Parts Study on the Force of Flexible Vacuum Cup Fixture for Aircraft Skin Trimming Large Deformations of Low Density Open-Cell Elastomeric Foams: Kelvin Model Study Chapter 4: Fluid Mechanics and Thermodynamics The Brief Introduction of High-Speed Trimaran Planing Hull and the Preliminary Study of the Longitudinal Stability Dynamics Optimization for the Valve Train of a Diesel Engine Simplified Second Order Model of Reynolds Equation for Simulating the Ultra-Thin Air Bearing Film in Hard Disk Drivers Heat Transfer Enhancement of Viscoelastic Fluid in the Rectangle Microchannel with Constant Heat Fluxes Modification of Flow Stress Model Based on Internal Variables Instability of Slip Flow between Two Concentric Cylinders Experiment of Temperature Field for High Speed Orthogonal Turning The Hydrodynamic Performance Prediction of Ship Hull with Propeller Research on of Litterfall Production of Eucalyptus Globulus Plantation Microstructure and Temperature Stability of Ca Substituted Forsterite Ceramics The Effects of Flexible Deformation on an Oscillating Airfoil at Low Reynolds Number Analysis and Improvement of Mobile Payment Security Based on SET Protocol The Application of MATLAB in Computational Fluid Dynamic Visualization Processing Two Dimensional Acoustic Manipulation in Microfluidic Channels Cutting Force Impact to Tool Life of CT5015 in High Speed Machining by Applying Negative Rake Angles Three-Dimensional Finite Element Analysis Shelves Influence of Tip Injection and Film Cooling for Blade Tip Flow and Heat Transfer Hydraulic Model and Numerical Simulation Study of Shuangwangcheng Pump Station A Novel Method to Fabricate Silver Chloride Films Study of Pre-Tightening Force on Piezoelectric Multi-Dimensional Force Sensor's Measurement Performance Application of the Off-Line Simulation System of the Ship Maneuvering in Transition Section Navigation Research of the Continuous Bend Effect of bct-5 Si on the Indentation of Monocrystalline Silicon Numerical Simulation of Two High Speed Trains Passing by each other in a Long Tunnel Generalized Reynolds-Orr Energy Equation with Wall Slip Organophilic Modification and Application of Nano-Fumed Silica in Pervaporation of Ethanol / Water Mixture Chapter 5: Biomechanics and Environmental Mechanics Vibrational and Stochastic Resonance in FitzHugh-Nagumo Neural Model with Time-Delay and Colored Additive Noise Safety Assessment of Bridge Structures under the Random Dense Vehicle Loads Dynamic Analysis of Response of Cofferdam with Steel Sheet Piles Induced by Earthquake Excitation Biomechanical Comparison of Different Pedicle Screw Fixations for Thoracolumbar Burst Fractures Using Finite Element Method Stochastic Resonance in a Time-Delayed Logistic Growth Model Driven by Periodic Signal and White Noise Analysis of Discharge of Transmission Line in Sandstorm The Comparative Study on Lower Limb Muscles between International and National Master Skating Athletes Fish Sound Frequency Domain Analysis and Acoustic Spread Distance Experiment Research Control Standard of Ground Surface Settlement Induced by Running Tunnel Construction in Beijing Subway Structural Analysis of Conical Bottom-Supported Offshore Wind Turbine Foundation One Dynamic Model of Human Elbow Joint in the Sagittal Plane The Comparative Analysis on Muscles of Short and Long Track Speed Skating Athletes Chapter 6: New Materials and Advanced Materials Effect of Tensile Strain and Gold Thickness on the Micropattern Topography of Gold Thin Coatings Deposited on Polydimethylsiloxane Experimental Investigation on the Vortex-Induced Vibration of the Cylinders with Helical Strakes The Multi-Joint Measuring Arm's Error Compensation Method Based on the Pose Configurations Quality Control of Casting Slab for 510L Steel Effect of Temper Temperature on Microstructures and Mechanical Properties of 8CrV Saw Blade for Metallurgy An Overview of Recent Research Works on the Forming of Thermoplastic Composite Sheets The Factors that Affect the Absorption of CO2 on the Lithium Zirconate Materials Electrodeposition of Cobalt Nanoparticles from Mixture of 1-Butyl-3-Methylimidazolium Chloride Ionic Liquid and Urea The Effects of Nickel-Plating on Al2O3 Particles Reinforced Steel Matrix Composites Porous Alumina from Protein Foaming-Consolidation Method Containing Hydrothermal Derived Hydroxyapatite Powder Preparation and Application of Titanate Nanotubes on Methylene Blue Degradation from Aqueous Media A Novel Nonenzymatic Hydrogen Peroxide Sensor Based on Pd Nanoparticles Modified Electrode Effects of Filament Pre-Tension to the Characteristics of Solo-Sirofil Composite Yarn Evaluation of Antioxidative Activity between CoQ10-Nanostructured Lipid Carrier and CoQ10 Cosmetic Characterization and Visible-Light Photocatalytic Activity of Nano-Bi2MoO6 Catalysts Prepared by Hydrothermal Process The Preparation Technique of Nanometer Molybdenum Trioxide by Hydrothermal Synthesis Study of Superconductivity of Fe-Doping DyBa2Cu3-XFexO7- Systems Using Positron Experiment Study on Thermal Fatigue Performance of Cold Work Roll Steel The Thermal Fatigue Performance for Cast Iron Brake Drum of Large Trucks Synthesis of Silver-Modified Sponge-Like Titanium Dioxide Arrays with Biomimetic Structure and its Enhanced Photocatalytic Fabrication of Porous Ceramic Scaffolds via Polymeric Sponge Method Using Sol-Gel Derived Strontium Doped Hydroxyapatite Experiment for Improving the Drum Strength of Agglomerate Preparation of Sn-In2O3 Nanoparticles Colloid Solution Preparation and Characterization of Novel Lithium Tantalate Target The Research on Fabrication Technique of Al2O3 Short Fiber Preform Numerical Study on Adhesive Interface Reinforcement of Piezoelectric Composite under Impact Load Experimental Investigations of Shear Lag Effect in a Simply Supported [0o +/-45o2 0o]T Laminated Box Beam Effects of Aging Treatment on Performance of Explosive Welded Beryllium-Bronze/Carbon-Steel Composite Plate Ablation Properties of C/C-ZrC-SiC Composites The Role of Alum in the Fabrication of Calcium Silicate for Dissolved Acetylene Cylinders Testing on Energy Absorption of Banana Fiber Polyester Composite Nonlinear Response of Carbon-Carbon Composite Panels Subjected to Thermal-Acoustic Loadings Study on Cold-Pressing Technology for Mixture of Iron Ore and Coal Research on Mechanical Properties of Separation Concrete-Filled Steel Tubes Subjected to Eccentric Compression on Non-Separation Side Hot Deformation Behavior of the 30%Mo/Cu-Al2O3 Composite Prepared by Vacuum Hot-Pressed Sintering Behaviors of TiN Nanoparticles in Mn18Cr2 Steel Crystallization Kinetics of Amorphous Finemet Modified with Co Thermal and FTIR Characterization of Unsaturated Polyester Resin/Epoxy Resin Composites Study on Effect of Different Preparation Process Parameters on Properties and Microstructure of SiO2/Cu Composites Study on Electrical Sliding Wear Property of Cu/MoS2/Mo Composites Oxide Film Morphology and Composition Analysis of TP304H Austenitic Stainless Steel at High Temperature Hot Deformation Behavior of Al2O3/Cu-10vol%WC Composite Microstructure and Properties of 31Mn2SiREB Cast Steel Comparison of Conservatism on Applying Statistical Analysis Method to Determine Composite Allowance Controllable Synthesis of CuNWs in High Yield and their Potential Applications in SPR Based Fields Synthesis of Monodispersed Ag-Coated SiO2 Nanoparticles with one-Pot Method and Investigation of its Antibacterial Activity Novel Synthesis of TiO2 Nanocrystals Induced by Nanocrystal Cellulose Research on Thermal Deformation State of Mould Copper Plate with Different CC Technical Parameters Impact Damage Behavior of Composite Stiffened Plates Highly Sensitive and Selective Pymetrozine Colorimetric Sensor Based on P-Aminobenzenesulfonic Acid Modified Ag NPs Experimental Study of High Frequency Guided Wave Inspection of Anchored Bolts Fine Spherical Tungsten Powder Prepared by Precipitation Reaction Experimental Study on Cutting Forces in Turning Aluminum-Silicon Alloy ZL104 Experimental Tensile Study on the Behavior of Composite Material with Roving Waviness Research on Ore-Proportioning Optimization Technology in Sintering Formation of Intermetallic Compounds on the Bond Interface of Aluminum-Clad Copper and its Influence on Bond Tensile Strength The Impact of Grain Size on Oxidation Behavior of TP304H Austenitic Stainless Steel at High Temperature in Air Study on the Effect of Different Joints Material on GRP Jacking Pipe The Accelerated Corrosion of Elemental Sulfur for Carbon Steel in Wet H2S Environment Study on the Effects of Deformation Temperature on Microstructure and Mechanical Properties of AZ80 Magnesium Alloy Physical Properties of Thermoplastic Cassava Starches Extruded from Commercial Modified Derivatives in a Pilot Scale Mircobial Sediment Solidification Hot Compressive Flow Behavior of Inconel 600 Superalloy Microwave-Assisted Extraction of Garlic Essential Oil from Garlic Effect of Calcium Stearate Concentration on Tensile Properties of Epoxidized Natural Rubber Effects of Heat Treatment on Microstructures and Properties of Ti811 Alloys Research on Corrosion Behavior of Al-Zn-In Based Anode Alloys by Circular Polarization Method Development of the Flux Solution for Omission of Water Washing Treatment of Hot Dip Galvanizing Process The Study of the Properties and Function of Large Ball Mill with Liner Material Effects of Ga on the Corrosion Morphology of Al-Zn-Sn-Ga Anode Alloy Research on Inverse Extrusion Process of High-Tin Wear-Resisting Cu-Sn-Pb-Ni Alloy Comparison Study on Microwave Absorbing Properties of SiC Absorbers Influence of Nano-Silica on Solvent Absorption in Polypropylene Packaging Research on the Application of VIPs to Reefer Containers A Study on Magnetic Filter Controlling TiN Films Prepared by Arc Ion Plating Thickness Dependence of Structural and Optical Characteristics of AZO Thin Films for Organic Photovoltaic Cells Effect of Heavy Metals and Leaching Toxicity of Magnesium Potassium Phosphate Cement Study on Erosion Wear Property of Nickel-Chromium Cast Iron Effect of Iron (III)-Doping on the Photocatalytic Activity of Titanium Dioxide Catalysts for Methylene Blue Degradation Analysis of the Impact of Row Materials on the Performance of Self-Leveling Cement Mortar Influence of Refiner on the Properties and Microstucutures of High-Tin Wear-Resisting Cu-Sn-Pb-Ni Alloy Application of Slow-Release Fertilizer with the Function of Water-Absorption and Water-Retention in Position Engineering Camouflage Extraction Behavior of Mercury(II) and Cadmium(II) in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and 8-Hydroxyl-Quinoline Effect of Aging Treatment on Microstructure and Properties of Cu-3Si-2Ni Alloy Tensile Properties and Microstructure of ZK60 Magnesium Alloys at High Temperature Structure and Compression Properties of Polyurethane-Imide Foams Prepartion of Al-Mn Alloy Coatings on Low Carbon Steel by Hot-Dip-Aluminizing Microstructure and Mechanical Properties of AZ81 Alloy with Gd The Dynamics for Aqueous Sodium Adsorption and Characterization of Natural Pyrophyllite The Microstructure of Ni-Based Surface Infiltrated Layer on Cast Steel Substrate Detection Experiments of High-Barrier and High-Temperature Sterilization and Easy Tear Flexible Plastic Packaging Materials Applied in Food Packaging The Design of a Compact Cable System for Bridge Study Progress of Material Surface Modification with Large Scale Pulse Electron Beam Preparation and Contrast of Transparent Conductive TiO2/Ag/ZnS Film by Magnetron Sputtering and Evaporation Coating Deposition Property Investigation on a Precious Ceramic Alloy Love Waves in a Piezoelectric Half-Space with an Anisotropic Elastic Layer Evaluation on some Properties of SL7560 Type Photosensitive Resin and its Fabricated Parts Modeling and Prediction of Creep Behavior of Polypropylene Packaging Belt Research on Failure Criteria of Homogenization Model of Masonry The Effect of Pressure-Induced Flow Processing on the Tensile Properties and Crystal Structure of Polypropylene Effect Evaluation of Slope Protection for Herbs Based on the Principal Component Analysis Mechanical Performances of Concrete Made with Manganese Slag Study on the Performance of a Novel Shrinkage Reducing Admixtures (SHSRA) of Concrete Improvement of Hydrogenation and Dehydrogenation Kinetics on MgH2 by the Catalytic Effect of ZrO2 An Experimental Study on Relationship between (Meth)Acrylate Polymers Structure and its Film Surface Wettability Hemicellulose Extraction from Coconut Shell Synthesis of Polymers Containing C-N Bond Using Pd-Catalyst Thermal Bridges in Building Envelope in Hot Summer and Cold Winter Areas of Thinking Correlations between Different Hardened Properties of High-Strength Self-Consolidating Concrete Including Palm Oil Fuel Ash Influence of Carbon Content on Fe-Cu Alloy Material Performance in Induction Motor with Compound Cage Rotor Synthesis and Drug Release from a PH/Temperature Sensitive Bead of Poly(N-Acryloylglycinate) and Alginate Effect of Phosphorus Slag and Fly Ash on Anti-Corrosion Property of High Belite Cement Influence of Porosity on Polarization in Piezoelectret Films with Regular Microstructure Dynamic Characterization and Drug Release of Thermosensitive Poly(N, N-Diethylacrylamide-Co-Itaconic Acid) Copolymer Hydrogels Effects of Ca on Mechanical Properties of Mg-6Zn-3Al Alloy High Temperature CO2 Adsorption on Si-Doped Lithium Zirconate Drug Release of a PH/Temperature Sensitive Core-Shelled Beads from Sodium Alginate and Poly(N-Acryloylglycinate) Investigation of Vibration Properties of Multi-Walled Carbon Nanotubes Growth Mechanism of Hollow ZnO Microsphere with Aperture Prepared by Oxidation of Zn Powder The Law of the Grain Size Changing in the Warm Tension Test for the B340/590DP Dual-Phase Steel Chapter 7: Functional Materials Study on the Microstructures and Wear Resistance of ZG30 Steel Surface Layer Effect of Bath Compositions on the Properties of Electroless Ni-Cu-P Alloys on Aluminum Simulation of V Atom Substitution Character in Ni-Al-V Alloy Effects of Annealing Temperature on Properties of CuIn (Se,S)2 Film Prepared by Sputtering Adsorption Behavior on Modified Fly Ash/EPDM Composite for Application in Machine Oil Effect of the Duty Cycle on Boronized Layer Formed by Pulse Electrodeposition Synthesis of Lactic Acid Grafting Starch Copolymer Catalyzed with Stannous Chloride Surface Modification for Porous Artificial Lightweight Aggregate and Mechanical Properties of the Resulting Concrete Building of Poly(Imino Ketone) Chains Model via Molecular Simulation Nano-Crystalline Diamond Films Deposited on Copper Substrate by MPCVD Method Effects of Solid-Solution Treatment on Microstructure and Mechanical Properties of HIP Treated Alloy 718 Facile Synthesis of N-{2-[4-(2-Pyrimidinyl)-1-Piperazinyl]ethyl} Adamantane-1-Carboxamide Synthesis and Spectroscopic Properties of LiY(WO 4)(MoO 4): Eu 3+ Red Phosphors for White LEDs Structures and Properties of the Coating for SPEEK/WPU Effect of Sn on Corrosion Resistance of Mg-6Al-1.2Y-0.9Nd Alloy The Research on Technology of Electroless Ni-W-P Ternary Alloys Plating on the Aluminium Alloy The Effect of Bacterial Cellulose on the Mechanical and Thermal Expansion Properties of Kenaf/Polylactic Acid Composites Strength Properties of Low Thermal Conductivity Fly Ash Bricks: Compressive and Flexural Strength Aspects Fair-Faced Light Weight Aggregate Concrete Preparation and Durability Research Cellulose Tris(3,5-Dimethylphenylcarbamate) Regioselectively Bonded to Small Pore Silica Gel as Chiral Stationary Phase for HPLC Evaluation on the Corrosion Resistance Improvement by Dipping to Inhibitor Solution of Galvanizing Steel Preparation, Characterization and Thermal Behavior of Copper(II) Complex with 1-(6-Hydroxynaphthalen-2-Yl)butane-1,3-Dione Preparation and Characterization of Konjac Glucomannan Gel Oxidation Behavior in Super-Plastic Microforming of Zr65Cu17.5Ni10Al7.5 Bulk Metallic Glass The Thickness Testing Technology of the Metal Base and Anticorrosion for Double Coating Corrugated Sheet Steel Beams for Guardrail The Relationship between the Free and the Bound Chloride in High Performance Concrete Study on Strength Reduction Method Based on Hinge Joint Concrete Block Slope Stability Description of Planer Anisotropy and Cyclic Plasticity Behavior of Aluminum Sheet Based on Crystal Plasticity Theory A Study of Polyvinyl Chloride Modified by Barium Sulfate Effect of K / Na on Primary Boride of Hypereutectic High-Boron Alloy Preparation and Evaluation of Fe2O3/Ceramic Composites for Flue Gas Desulfurization Preliminary Study on High Efficiency Deinking Agent of ONP A Contrastive Study between Chinese Traditional and Western Classical Column within Style Decoration Study of Selecting Proper Chitosan from Various Chitosan Sample as Paper Strengthening Agent Study on the Effect of Surface Coating on Thermal Manikin's Repeatability Drug Release Behavior from a pH/Temperature Sensitive Hydrogel of Poly(N-Acryloylglycine) and Chitosan Synthesis and Characterization of Thermoplastic Biomaterial Based on Acylated Chitosan Oligosaccharide Research on Application of Phosphorus Slag in Cement Efficient Adsorption of NH4+ Ions on Modified Fly Ash/EPDM Environmentally Friendly Composite Chapter 8: Material Processing Technology Microstructure and Mechanical Properties of Mg-9Al-6.5Ca-3Zn-0.6Mn-XNd Alloys Prepared by Spray Forming Study on Processing Technology for Mold Cavity Parts ADAMS-Based Braking System of a Tracked Vehicle to Optimize Mechanical Linkage Design Gravity Anomaly Computed by GOCE Data in Northeastern Margin of Tibetan Plateau Investigation of Cutting Model in Machining of Al/SiCp Metal Matrix Composite Physical Simulation of Grooved Axis Warm Surface Rolling Slope Instability Risk Analysis in Earth Dams Considering Uncertain Factors Research on Technological Mineralogy of Refractory Hematite Ore Experimental Investigation on Surface Integrity in Grinding Titanium Alloys with Small Vitrified CBN Wheel Microscopic Mechanism Research of T10 Steel Accumulated Plastic Deformation in Low Stress Load Comparative Analysis of Automotive Interior Trim Materials Based on Moldflow Prediction of Edgewise Compressive and Side Tensile Elastic Modulus of Core Materials of Ripple Structure Sandwich Composites Study on Machining Dental Implants by Whirling Approach Analysis and Simulation on the Connection Strength of Flareless Tube Fittings Microencapsulation of Cajuput Oil by Spray Drying: Influence of Wall Systems on the Oil Retention and Storage Effect of Solidification Pressure on Secondary Dendrite Arm Spacing of Aluminum Alloy Study on State Recognition of ASCE Benchmark FEM Based on Lyapunov Exponent Spectrum Entropy Floating Grains in the HDC Casting 7075 Aluminum Alloy Ingot Finite Element Analysis and Topology Optimization of the Clamping Unit in a Two-Platen Injection Machine Static Analysis of Curved Beams with Clamped-Clamped Ends under Thermo Load Study on the Influence Factors of Real Estate Price Based on Regression Model - The Case of Jilin City Review of Research on Special Load and Vibration Behavior of Shaft Tower Structure Experimental Study on Dynamic Modulus Master Curve of ATPB Mixture Optimization of Cutting Parameters on Turning Process Based on Surface Roughness Using Response Surface Methodology The Deformation Simulation of the Laser-MIG Hybrid Welding in Fillet-Welded Joint The Recrystallization Simulation of H-Beam Rolling Process Checking Gypsum as Structural Material Design and Optimization of the Deposition Baffle Shape for Magnetron Sputtering Design of Parking Control Systems Based on Wireless Sensor Network Influence of Surface Treatments on Fretting Fatigue Life Prediction in TA15 Effects of Enzymatic Modification of Masson Pine Mechanical Pulp on Fiber Morphology and Pulp Properties CTOD Testing and Evaluation for Weld Joint for Heavy Thickness Offshore Structure Steel S355G10+N Burr Minimization in Shaping of Aluminium Alloy-Through Experimental and Stress Analysis Approach Research on Modification of Bentonite and its Printing Quality when Used in Color Ink-Jet Paper Analysis on the Distribution Law of WC Particles during Centrifugal Casting Process The Surface Roughness Modeling on Turn-Milling Process and Analysis of Influencing Factors Finite Element Analysis of Materials Flow Behavior in Friction Stir Welding of 7075 Aluminum Alloy Plate Research on Design for Comforts of Modern Residence Finite Element Analysis and Experimental Study on Rubber Waveform Generator Numerical Simulation Temperature Field of Laser Cladding Titanium Alloy Research on Slope Deformation Regularity of the Badong Formation in the Three-Gorges Reservoir Area Precision Forming and Die Design for Octahedral Shell of Static Stents A New Nitriding Process of 4Cr5MoSiV1 for Extrusion Die Numerical Simulation of the Cold Expansion and Residual Stress Relaxation for Aluminum Alloy 7050 Microstructure of Flame-Spray Welded Ni-Based Alloy Coating and Base Metal Investigation of the Effect of Heating-Lines on Tensional Mechanical Properties of Sheet Metal after Laser Forming CDM Model and its Application to Numerical Simulation on Rotating Band's Engraving Process Research on Fire Performance of a Profiled Light Aggregate Concrete Composite Floor Identification of Subsurface Deformation in Machining of Inconel 718 Superplastic Behavior and Constitutive Equation of AZ31B Magnesium Alloy Effect of Underlay Rigidity on Breaking Behavior of Aluminum Sheet during Wedged Shearing Process A New Porous Mullite Nozzle for Refining Molten Aluminum Influence of Cooling Rate on the Microstructures and Properties of Q550 Milling Parameters Optimization by Grey Relation Theory Study on Simulation of Dispersing Uniformity of Aluminum Alloy Melt in Rheo-Casting Mold Influence of Friction on Metal Flow Behaviour and Die Stress of Backward Extrusion Numerical Study on the Relationship of the Axis Orientation of Deeply Buried Circular Tunnel and the Direction of Horizontal In Situ Stress The Force Theoretical Analysis and Experiment for Wire Saw with UVM Cutting SiC Monocrystal Study on Registering Accuracy and Precision in Test of Printing Press Numerical Simulation on the Microstructure of Small Electroslag Remelting Ingot The Experiment of CO2 Pollution and Treating in Silicate-Based Drilling Fluids Study on Borehole Stability in Haita Basin Experimental Study on Frost Resistance of the Shale Ceramsite Concrete A Novel Approach in Improving I/O Performance of Small Meteorological Files on HDFS Influence of Microstructure of TC4 Titanium Alloy on Ultrasonic Velocity and Attenuation Critical Strain Model of Cr4 Steel for Heavy Supporting Roller The Boundary Element Method to Solve the 2D Elastic Stress and Displacement Problem The Study on Harmonic Characteristics of Three-Phase SPWM Inverter Energy Consumption Analysis of Cooling System in Jiahe Deep Coal Mine Study on Determination of Friction Model at the Tool-Chip Interface of Titanium Alloy Ti6Al4V Based on Orthogonal Cutting Effect of Cold Reduction Ratio and Annealing Temperature on Microstructure and Mechanical Property of Added Phosphorus High Strength Nb-IF Steel The Mathematical Model of Online Quenching for Extruding Bar of 6061 Aluminum Alloy Study on a Model for Perceived Text Definition of Multi-Stroke Chinese Character Study on the Influence of Deforming Velocity on Steel Ball Quality Based on DEFORM An Airflow Field Finite Element Analysis of the Seed Adsorption Hole of Pneumatic Seeder Study on Corrosion Resistance of High-Entropy Alloys NiCoCrFeMnCuC in Medium Acid Liquid The Influences of Interface Properties Weakening on Bearing Behavior of Pile Foundation Multi-Feature Fusion Based Object Detecting and Tracking Hydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed Dryer Effect of Initial Particle Size on Coarsening Kinetics of Prime Precipitate in Nickel-Based Superalloy - A Phase Field Study A New Method to Accurately Describe Cross-Section Distortion in Rotary Draw Bending Process of Thin-Walled Rectangular Tube An Experimental Study on Electric Hot Milling for T10A Tool Steel The Analysis on Structure of U-Shaped Compartment Based on Soil Mechanics Principle Study on a Method for Vibration Control of the Aeronautic Thin-Walled Workpiece in High-Speed Milling Process Study of Post-Fire Behavior of a Profiled Sheet-Ceramsite Concrete Composite Floor Numerical Simulation on Back-Extrusion Loadcase of Magnesium Alloy Wheel Chapter 9: Welding and Mechanical Connections and Fracture Analysis of the Relationship between CTOD Toughness and Micromechanism of Marine Steel Weld Joints Experimental Study on the Effect of CGHAZ Microstructure on CTOD of High-Strength Steel EQ56 Neural Network Based Toughness Prediction in CGHAZ of Low-Alloy Steel Produced by Temper Bead Welding A Study of Fuzzy Neural Networks Control for the Quality of Resistance Spot Welding Interface Microstructure and Weld Strength of Steel/Aluminum Alloy Joints by Resistance Spot Welding Effect of Activating Flux and Welding Parameters on Performance of Aluminum Alloy Weldment in GTA Welding Process Effect of Microstructure on CTOD of Welded Joints for Offshore High-Strength Steel

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB08875634
• ISBN:
  • 9783037852804
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA88918107