Materials and computational mechanics : selected, peer reviewed papers from the 2011 International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2011), November 18-20, 2011, Shenzhen, China
著者
書誌事項
Materials and computational mechanics : selected, peer reviewed papers from the 2011 International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2011), November 18-20, 2011, Shenzhen, China
（Applied mechanics and materials, v. 117-119）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
- Part 3
大学図書館所蔵 全1件
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This collection of peer-reviewed papers describes the latest advances in, and applications of: basic mechanics and research methods, dynamics and vibration, solid mechanics, fluid mechanics and thermodynamics, biomechanics and environmental mechanics, new materials and advanced materials, functional materials, materials processing technology, welding and mechanical connections, fracture, etc. the work is thus a usefully up-to-date guide to these topics.
目次
Preface and Organizing Committee
Chapter 1: The Basic of Mechanics and Research Methods
Research on Control Effectiveness of Semi-Active MR-TMD to some Coal Gas Manufacturing Plant
Direct Tensile Strength Measurement of Concrete
Dynamic Simulation and Test for the Valve Train Dynamics
Occluded Object Tracking Based on Mean Shift and Accumulation Error Suppression
Studies on Stability of Peanut Mango Milk
Application Study of Wa Nationality Totem Symbol of Lincang in Modern Furniture Design
Rolling Element Defect Diagnosis Based on Local Mean Decomposition
Study on the FCG Prediction Model Based on Material's LCF Damage
Study on Composite Model for Vibro-Replacement Stone Column Foundation by Finite Element Method
The Application of Interval Analysis Method in the Stability Analysis
Stress Distribution Rule of Reinforced Concrete Specimen under Uniaxial Tension
Analysis on Long-Span Bridge Seismic Response in Multi-Dimensional and Multi-Point Mode
Experimental Study on Impact Compression and Spliting of Granite
Research on Lower Muscle Strength Feature for Elite Speed Skaters in High Speed Gliding
Effect of the Stress Balance on Determination of Rock Dynamic Fracture Toughness Using Holed-Cracked Flattened Brazilian Disc
Preparation of Ni-Coated SiC Ceramic Composite Powder by Electroless Plating
Corrosion Behavior of Electroless Deposited Fe-Zn Coating
Study on the Vibro-Acoustic Characteristics of a Vibration Isolation Mass Structure with Composite Braces
New Results of Buckling and Postbuckling Behaviors for Fiber-Reinforced Composite Shear Deformable Anisotropic Laminated Cylindrical Shell Subjected to Torsion
Simulation Analysis of the Tensile Process on Sheet Sample
Calculation and Analysis of 2-D Thermal Stress Field in Induction Motor with Compound Cage Rotor under Different Load
The Sharp Indentation for Identifying Constitutive Relationship of Metallic Materials
Evaluation of the Steep Slope Stability Based on Theory of GPS Monitoring Analysis
Difference and Application of Matrix Displacement Method and Finite Element Method in the Truss Structure Analysis
Mechanism of Work Hardening of Mn13 after Asynchronous Cold Rolling
Recent Developments of Material Deformation Measurement
Detection for the Automatic Transmission of the Tractor Based on Spectroscopic Technology
Edge Drop Constituent Analysis of Cold Rolled Strip
The Existence of Positive Periodic Solution for a Class of Functional Differential Equation with Multi-Delays
Research on Influence of Flexible Parts' Rigidity to Passenger Car Exhaust System's Modal
Design and Finite Element Analysis in Hydraulic Retarder Bracket Based on ANSYS
Study on Stability of High Embankments under Complicated Stress Conditions
Kinematical Analysis on the Technology of Overhead Smash between Badminton and Tennis
Studies on MAaximum Hydrostatic Testing Pressure for New Pipeline
Noether Symmetry and First Integral of Discrete Nonconservative and Nonholonimic Hamiltoinian System
Response Analysis on Asymmetric Twin Tower Building with Large Bases Subjected to Seismic Action
One Numerical Simulation Method and its Applications for Fatigue Crack Growth
Carbonation of High Strength Concrete
Chapter 2: Dynamics and Vibration
Numerical Simulation of Cu-Cu Interface Thermal Resistance by Utilizing Laser Photothermal Method
Seismic Control Research of Longitudinal Floating Bridge Based on MR Damper
Model Test Research of the Influences of Rock-Fall Impaction on Accelerations of the Cut-and-Cover Tunnel Structure
Structure Design and Finite Element Analysis of Airborne Equipment Integrated Mounting Shelf
Microstructure and Mechanical Properties of a Rapid Directionally Solidified Ti47Al Alloy
An Impact Analysis of Turbine Guide Bearing Stiffness on Rotating Parts' Transverse Vibration Characteristics
Dynamic Responses of a Simply Supported Bridge to Moving Vehicle Loads
Research on Technological Parameters of Laser Cladding
Study on Flow-Induced Vibration Characteristics of Hydraulic Hoist of Large-Span Upwelling Radial Steel Gate
Dynamic Analysis of Axially Loaded Beams under Arbitrary Transverse Force
Mechanics of Hairspring in Mehanical Watch Movement
Effects of Process Conditions on Mechanics Properties of Micro-Foaming PP/GF Composites
Structural Fatigue Analysis on Expansion Joints of Diversion Penstock of Hydropower Station
Study on Properties of Al2O3 -CaO-CaF2 Slag System
A Novel Simplified and High-Precision Inverse Dynamics Model for Magneto-Rheological Damper
Kinetic Analysis of Hydraulic Mount of Vehicular Engine Based on Fluid-Structure Interaction
Finite Element Analysis of Ice-Cone Interaction
Nonlinear Seismic Analysis of Masonry Infilled RC Frame Structures
Stability of a Supported Cylinder in Axial Flow
The Numerical Study of Concrete Mesostructures' Effect on Ballistic Responses in Penetration Problems
Study on Model of Thermal Crown of Single-Stand Irreversible Foil Mill
Control Final Cooling Temperature on High Strength of the Pipeline Radio Yield Influence
Structure and Property of ZnO Content with Tb3+ Doped Zinc Aluminum Phosphate Glass
Study on in-Plane Bending Vibration of a Combined Ring-Beam
The FOPS Design of Wheel Loader Cabin Based on Topology Optimization
An Investigation into the Earthquake Reaponses of Special-Shaped Arch Bridges
Sol-Gel Derived Titania/Hydroxyapatite Layer on Titanium Substrate
Temperature Distribution and Operating Efficiency in Rectangular Cold Crucible Directional Solidifying Ti46Al0.5W0.5Si Alloys
Aero-Elastic Active Control Modeling via Improved POD Method
The Noise-Induced Chaotic Transition in a Vibro-Impact Oscillator
Study on Useful Concrete Elastic-Plastic Constitutive Model
Numerical Simulation of the Reverse Plugging of a Thin Plate Irradiated by Long Pulsed Laser
Effects of Rare Earth La on Microstructures, Mechanical Properties and Sliding Wear Behavior of High-Aluminium Zinc Foundry Alloy ZA30
Research about Numerical Integration Method for Structural Dynamic Response in Real Time on-Line Test
Response of Two-Disk Rotor with Squeeze Film Dampers and its Variation with Parameters
Experimental Study on CFRP-Bonded Steel Plates with Thickness Reduction Using Underwater Epoxy
Research on Interface Structure and Fracture Mechanism of Diffusion Bonding of Titanium Alloy/Cu/Stainless Steel
Comprehensive Recycling of Construction Waste
Dynamics Analysis of the Bar-Type Piezoelectric Motor Stator
Evaluation of the Mechanical Properties of Copper Thin Film and Copper Bulk at the Nano-Scale by Nanoindenter
Grain Growth Behaviors of Multicrystalline Silicon during Cold Crucible Continuous Casting
Investigation on Mechanical Properties of Pulsed Nd:YAG Laser Welding on AISI 304 Stainless Steel to AISI 1008 Steel
Reinforcement Phase of Situ TiC with the Laser Surface Alloying on Steel C1045
Chapter 3: Solid Mechanics
The Performance and Strength Mechanism of Stabilized Aggregate Containing Special Cement with Desulfurization Residue
The Continuity and Inheriting of Historical Context of Architecture during Urban Renewal in Chongqing
Static Stress and Modal Analysis of the Impeller of the High-Pressure Low-Flow Pump
Rate-Dependent Behavior and Constitutive Model of Polycarbonate at Strain Rate from 10-5 to 103 S-1
Three Dimensional Cosserat Continuum Model and its Application to Analysis for the Cantilever Beam
Seepage Analysis for Dashiban Landslide Applied Multi-Day Rainstorm once in Hundred Years
Analysis of Fuzzy Stress and Strength Reliability of Double-Layer Pressure Vessel
Elastic Waves of Anisotropic Saturated Porous Solids with Thermal Effect
Green Quasifunction Method for Bending Problem of Clamped Orthotropic Thin Plates with Trapezoidal Boundary Shape
The Dimensionless Load Separation Method Used for Fracture Toughness Test and its Application
Chemical Solidification Stress Calculation and Experiment of Concrete-Filled Steel Tube
Three-Dimensional Viscoelastic Interactions of a Center of Dilatation with a Penny-Shaped Interfacial Crack
Crack Propagation of Jointed Rock and Application
Investigation on Spb Method Based on Nondimensional Load Separation Principle for SEB and CT Specimens
Scalability Study on Large-Scale Parallel Finite Element Computing in PANDA Frame
A Yield Criterion for Pressure-Sensitive Materials
Research on Parametric Design Platform of Gear Based on Pro/E
Analysis of Multiaxial Low Cycle Fatigue Life for Single Crystal Ni-Based Superalloy Based on Two-Phase Unit Cell Model
The Reliability Analysis of Leaf Spring Based on PDS
Effect of Ultrasound Treatment on Properties of Soy Proteins Film
Design of the Microfluidic Chip of Oil Detection
The Mechanical Analysis of Tubing in Deep Gas Wells in Volcanic Reservoirs
The Application of Dynamic Compaction Techniques Combining Plastic Drainage Plate to Improve Soft Soil Foundations in a College
Numerical Simulation of the Collapse of Stepped Circular Tube Subjected to Oblique Load
Fuzzy Comprehensive Evaluation of Cutting Parameters when Milling Plane Features of Aeroengine Structure Parts
Study on the Force of Flexible Vacuum Cup Fixture for Aircraft Skin Trimming
Large Deformations of Low Density Open-Cell Elastomeric Foams: Kelvin Model Study
Chapter 4: Fluid Mechanics and Thermodynamics
The Brief Introduction of High-Speed Trimaran Planing Hull and the Preliminary Study of the Longitudinal Stability
Dynamics Optimization for the Valve Train of a Diesel Engine
Simplified Second Order Model of Reynolds Equation for Simulating the Ultra-Thin Air Bearing Film in Hard Disk Drivers
Heat Transfer Enhancement of Viscoelastic Fluid in the Rectangle Microchannel with Constant Heat Fluxes
Modification of Flow Stress Model Based on Internal Variables
Instability of Slip Flow between Two Concentric Cylinders
Experiment of Temperature Field for High Speed Orthogonal Turning
The Hydrodynamic Performance Prediction of Ship Hull with Propeller
Research on of Litterfall Production of Eucalyptus Globulus Plantation
Microstructure and Temperature Stability of Ca Substituted Forsterite Ceramics
The Effects of Flexible Deformation on an Oscillating Airfoil at Low Reynolds Number
Analysis and Improvement of Mobile Payment Security Based on SET Protocol
The Application of MATLAB in Computational Fluid Dynamic Visualization Processing
Two Dimensional Acoustic Manipulation in Microfluidic Channels
Cutting Force Impact to Tool Life of CT5015 in High Speed Machining by Applying Negative Rake Angles
Three-Dimensional Finite Element Analysis Shelves
Influence of Tip Injection and Film Cooling for Blade Tip Flow and Heat Transfer
Hydraulic Model and Numerical Simulation Study of Shuangwangcheng Pump Station
A Novel Method to Fabricate Silver Chloride Films
Study of Pre-Tightening Force on Piezoelectric Multi-Dimensional Force Sensor's Measurement Performance
Application of the Off-Line Simulation System of the Ship Maneuvering in Transition Section Navigation Research of the Continuous Bend
Effect of bct-5 Si on the Indentation of Monocrystalline Silicon
Numerical Simulation of Two High Speed Trains Passing by each other in a Long Tunnel
Generalized Reynolds-Orr Energy Equation with Wall Slip
Organophilic Modification and Application of Nano-Fumed Silica in Pervaporation of Ethanol / Water Mixture
Chapter 5: Biomechanics and Environmental Mechanics
Vibrational and Stochastic Resonance in FitzHugh-Nagumo Neural Model with Time-Delay and Colored Additive Noise
Safety Assessment of Bridge Structures under the Random Dense Vehicle Loads
Dynamic Analysis of Response of Cofferdam with Steel Sheet Piles Induced by Earthquake Excitation
Biomechanical Comparison of Different Pedicle Screw Fixations for Thoracolumbar Burst Fractures Using Finite Element Method
Stochastic Resonance in a Time-Delayed Logistic Growth Model Driven by Periodic Signal and White Noise
Analysis of Discharge of Transmission Line in Sandstorm
The Comparative Study on Lower Limb Muscles between International and National Master Skating Athletes
Fish Sound Frequency Domain Analysis and Acoustic Spread Distance Experiment Research
Control Standard of Ground Surface Settlement Induced by Running Tunnel Construction in Beijing Subway
Structural Analysis of Conical Bottom-Supported Offshore Wind Turbine Foundation
One Dynamic Model of Human Elbow Joint in the Sagittal Plane
The Comparative Analysis on Muscles of Short and Long Track Speed Skating Athletes
Chapter 6: New Materials and Advanced Materials
Effect of Tensile Strain and Gold Thickness on the Micropattern Topography of Gold Thin Coatings Deposited on Polydimethylsiloxane
Experimental Investigation on the Vortex-Induced Vibration of the Cylinders with Helical Strakes
The Multi-Joint Measuring Arm's Error Compensation Method Based on the Pose Configurations
Quality Control of Casting Slab for 510L Steel
Effect of Temper Temperature on Microstructures and Mechanical Properties of 8CrV Saw Blade for Metallurgy
An Overview of Recent Research Works on the Forming of Thermoplastic Composite Sheets
The Factors that Affect the Absorption of CO2 on the Lithium Zirconate Materials
Electrodeposition of Cobalt Nanoparticles from Mixture of 1-Butyl-3-Methylimidazolium Chloride Ionic Liquid and Urea
The Effects of Nickel-Plating on Al2O3 Particles Reinforced Steel Matrix Composites
Porous Alumina from Protein Foaming-Consolidation Method Containing Hydrothermal Derived Hydroxyapatite Powder
Preparation and Application of Titanate Nanotubes on Methylene Blue Degradation from Aqueous Media
A Novel Nonenzymatic Hydrogen Peroxide Sensor Based on Pd Nanoparticles Modified Electrode
Effects of Filament Pre-Tension to the Characteristics of Solo-Sirofil Composite Yarn
Evaluation of Antioxidative Activity between CoQ10-Nanostructured Lipid Carrier and CoQ10 Cosmetic
Characterization and Visible-Light Photocatalytic Activity of Nano-Bi2MoO6 Catalysts Prepared by Hydrothermal Process
The Preparation Technique of Nanometer Molybdenum Trioxide by Hydrothermal Synthesis
Study of Superconductivity of Fe-Doping DyBa2Cu3-XFexO7- Systems Using Positron Experiment
Study on Thermal Fatigue Performance of Cold Work Roll Steel
The Thermal Fatigue Performance for Cast Iron Brake Drum of Large Trucks
Synthesis of Silver-Modified Sponge-Like Titanium Dioxide Arrays with Biomimetic Structure and its Enhanced Photocatalytic
Fabrication of Porous Ceramic Scaffolds via Polymeric Sponge Method Using Sol-Gel Derived Strontium Doped Hydroxyapatite
Experiment for Improving the Drum Strength of Agglomerate
Preparation of Sn-In2O3 Nanoparticles Colloid Solution
Preparation and Characterization of Novel Lithium Tantalate Target
The Research on Fabrication Technique of Al2O3 Short Fiber Preform
Numerical Study on Adhesive Interface Reinforcement of Piezoelectric Composite under Impact Load
Experimental Investigations of Shear Lag Effect in a Simply Supported [0o +/-45o2 0o]T Laminated Box Beam
Effects of Aging Treatment on Performance of Explosive Welded Beryllium-Bronze/Carbon-Steel Composite Plate
Ablation Properties of C/C-ZrC-SiC Composites
The Role of Alum in the Fabrication of Calcium Silicate for Dissolved Acetylene Cylinders
Testing on Energy Absorption of Banana Fiber Polyester Composite
Nonlinear Response of Carbon-Carbon Composite Panels Subjected to Thermal-Acoustic Loadings
Study on Cold-Pressing Technology for Mixture of Iron Ore and Coal
Research on Mechanical Properties of Separation Concrete-Filled Steel Tubes Subjected to Eccentric Compression on Non-Separation Side
Hot Deformation Behavior of the 30%Mo/Cu-Al2O3 Composite Prepared by Vacuum Hot-Pressed Sintering
Behaviors of TiN Nanoparticles in Mn18Cr2 Steel
Crystallization Kinetics of Amorphous Finemet Modified with Co
Thermal and FTIR Characterization of Unsaturated Polyester Resin/Epoxy Resin Composites
Study on Effect of Different Preparation Process Parameters on Properties and Microstructure of SiO2/Cu Composites
Study on Electrical Sliding Wear Property of Cu/MoS2/Mo Composites
Oxide Film Morphology and Composition Analysis of TP304H Austenitic Stainless Steel at High Temperature
Hot Deformation Behavior of Al2O3/Cu-10vol%WC Composite
Microstructure and Properties of 31Mn2SiREB Cast Steel
Comparison of Conservatism on Applying Statistical Analysis Method to Determine Composite Allowance
Controllable Synthesis of CuNWs in High Yield and their Potential Applications in SPR Based Fields
Synthesis of Monodispersed Ag-Coated SiO2 Nanoparticles with one-Pot Method and Investigation of its Antibacterial Activity
Novel Synthesis of TiO2 Nanocrystals Induced by Nanocrystal Cellulose
Research on Thermal Deformation State of Mould Copper Plate with Different CC Technical Parameters
Impact Damage Behavior of Composite Stiffened Plates
Highly Sensitive and Selective Pymetrozine Colorimetric Sensor Based on P-Aminobenzenesulfonic Acid Modified Ag NPs
Experimental Study of High Frequency Guided Wave Inspection of Anchored Bolts
Fine Spherical Tungsten Powder Prepared by Precipitation Reaction
Experimental Study on Cutting Forces in Turning Aluminum-Silicon Alloy ZL104
Experimental Tensile Study on the Behavior of Composite Material with Roving Waviness
Research on Ore-Proportioning Optimization Technology in Sintering
Formation of Intermetallic Compounds on the Bond Interface of Aluminum-Clad Copper and its Influence on Bond Tensile Strength
The Impact of Grain Size on Oxidation Behavior of TP304H Austenitic Stainless Steel at High Temperature in Air
Study on the Effect of Different Joints Material on GRP Jacking Pipe
The Accelerated Corrosion of Elemental Sulfur for Carbon Steel in Wet H2S Environment
Study on the Effects of Deformation Temperature on Microstructure and Mechanical Properties of AZ80 Magnesium Alloy
Physical Properties of Thermoplastic Cassava Starches Extruded from Commercial Modified Derivatives in a Pilot Scale
Mircobial Sediment Solidification
Hot Compressive Flow Behavior of Inconel 600 Superalloy
Microwave-Assisted Extraction of Garlic Essential Oil from Garlic
Effect of Calcium Stearate Concentration on Tensile Properties of Epoxidized Natural Rubber
Effects of Heat Treatment on Microstructures and Properties of Ti811 Alloys
Research on Corrosion Behavior of Al-Zn-In Based Anode Alloys by Circular Polarization Method
Development of the Flux Solution for Omission of Water Washing Treatment of Hot Dip Galvanizing Process
The Study of the Properties and Function of Large Ball Mill with Liner Material
Effects of Ga on the Corrosion Morphology of Al-Zn-Sn-Ga Anode Alloy
Research on Inverse Extrusion Process of High-Tin Wear-Resisting Cu-Sn-Pb-Ni Alloy
Comparison Study on Microwave Absorbing Properties of SiC Absorbers
Influence of Nano-Silica on Solvent Absorption in Polypropylene Packaging
Research on the Application of VIPs to Reefer Containers
A Study on Magnetic Filter Controlling TiN Films Prepared by Arc Ion Plating
Thickness Dependence of Structural and Optical Characteristics of AZO Thin Films for Organic Photovoltaic Cells
Effect of Heavy Metals and Leaching Toxicity of Magnesium Potassium Phosphate Cement
Study on Erosion Wear Property of Nickel-Chromium Cast Iron
Effect of Iron (III)-Doping on the Photocatalytic Activity of Titanium Dioxide Catalysts for Methylene Blue Degradation
Analysis of the Impact of Row Materials on the Performance of Self-Leveling Cement Mortar
Influence of Refiner on the Properties and Microstucutures of High-Tin Wear-Resisting Cu-Sn-Pb-Ni Alloy
Application of Slow-Release Fertilizer with the Function of Water-Absorption and Water-Retention in Position Engineering Camouflage
Extraction Behavior of Mercury(II) and Cadmium(II) in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and 8-Hydroxyl-Quinoline
Effect of Aging Treatment on Microstructure and Properties of Cu-3Si-2Ni Alloy
Tensile Properties and Microstructure of ZK60 Magnesium Alloys at High Temperature
Structure and Compression Properties of Polyurethane-Imide Foams
Prepartion of Al-Mn Alloy Coatings on Low Carbon Steel by Hot-Dip-Aluminizing
Microstructure and Mechanical Properties of AZ81 Alloy with Gd
The Dynamics for Aqueous Sodium Adsorption and Characterization of Natural Pyrophyllite
The Microstructure of Ni-Based Surface Infiltrated Layer on Cast Steel Substrate
Detection Experiments of High-Barrier and High-Temperature Sterilization and Easy Tear Flexible Plastic Packaging Materials Applied in Food Packaging
The Design of a Compact Cable System for Bridge
Study Progress of Material Surface Modification with Large Scale Pulse Electron Beam
Preparation and Contrast of Transparent Conductive TiO2/Ag/ZnS Film by Magnetron Sputtering and Evaporation Coating Deposition
Property Investigation on a Precious Ceramic Alloy
Love Waves in a Piezoelectric Half-Space with an Anisotropic Elastic Layer
Evaluation on some Properties of SL7560 Type Photosensitive Resin and its Fabricated Parts
Modeling and Prediction of Creep Behavior of Polypropylene Packaging Belt
Research on Failure Criteria of Homogenization Model of Masonry
The Effect of Pressure-Induced Flow Processing on the Tensile Properties and Crystal Structure of Polypropylene
Effect Evaluation of Slope Protection for Herbs Based on the Principal Component Analysis
Mechanical Performances of Concrete Made with Manganese Slag
Study on the Performance of a Novel Shrinkage Reducing Admixtures (SHSRA) of Concrete
Improvement of Hydrogenation and Dehydrogenation Kinetics on MgH2 by the Catalytic Effect of ZrO2
An Experimental Study on Relationship between (Meth)Acrylate Polymers Structure and its Film Surface Wettability
Hemicellulose Extraction from Coconut Shell
Synthesis of Polymers Containing C-N Bond Using Pd-Catalyst
Thermal Bridges in Building Envelope in Hot Summer and Cold Winter Areas of Thinking
Correlations between Different Hardened Properties of High-Strength Self-Consolidating Concrete Including Palm Oil Fuel Ash
Influence of Carbon Content on Fe-Cu Alloy Material Performance in Induction Motor with Compound Cage Rotor
Synthesis and Drug Release from a PH/Temperature Sensitive Bead of Poly(N-Acryloylglycinate) and Alginate
Effect of Phosphorus Slag and Fly Ash on Anti-Corrosion Property of High Belite Cement
Influence of Porosity on Polarization in Piezoelectret Films with Regular Microstructure
Dynamic Characterization and Drug Release of Thermosensitive Poly(N, N-Diethylacrylamide-Co-Itaconic Acid) Copolymer Hydrogels
Effects of Ca on Mechanical Properties of Mg-6Zn-3Al Alloy
High Temperature CO2 Adsorption on Si-Doped Lithium Zirconate
Drug Release of a PH/Temperature Sensitive Core-Shelled Beads from Sodium Alginate and Poly(N-Acryloylglycinate)
Investigation of Vibration Properties of Multi-Walled Carbon Nanotubes
Growth Mechanism of Hollow ZnO Microsphere with Aperture Prepared by Oxidation of Zn Powder
The Law of the Grain Size Changing in the Warm Tension Test for the B340/590DP Dual-Phase Steel
Chapter 7: Functional Materials
Study on the Microstructures and Wear Resistance of ZG30 Steel Surface Layer
Effect of Bath Compositions on the Properties of Electroless Ni-Cu-P Alloys on Aluminum
Simulation of V Atom Substitution Character in Ni-Al-V Alloy
Effects of Annealing Temperature on Properties of CuIn (Se,S)2 Film Prepared by Sputtering
Adsorption Behavior on Modified Fly Ash/EPDM Composite for Application in Machine Oil
Effect of the Duty Cycle on Boronized Layer Formed by Pulse Electrodeposition
Synthesis of Lactic Acid Grafting Starch Copolymer Catalyzed with Stannous Chloride
Surface Modification for Porous Artificial Lightweight Aggregate and Mechanical Properties of the Resulting Concrete
Building of Poly(Imino Ketone) Chains Model via Molecular Simulation
Nano-Crystalline Diamond Films Deposited on Copper Substrate by MPCVD Method
Effects of Solid-Solution Treatment on Microstructure and Mechanical Properties of HIP Treated Alloy 718
Facile Synthesis of N-{2-[4-(2-Pyrimidinyl)-1-Piperazinyl]ethyl} Adamantane-1-Carboxamide
Synthesis and Spectroscopic Properties of LiY(WO 4)(MoO 4): Eu 3+ Red Phosphors for White LEDs
Structures and Properties of the Coating for SPEEK/WPU
Effect of Sn on Corrosion Resistance of Mg-6Al-1.2Y-0.9Nd Alloy
The Research on Technology of Electroless Ni-W-P Ternary Alloys Plating on the Aluminium Alloy
The Effect of Bacterial Cellulose on the Mechanical and Thermal Expansion Properties of Kenaf/Polylactic Acid Composites
Strength Properties of Low Thermal Conductivity Fly Ash Bricks: Compressive and Flexural Strength Aspects
Fair-Faced Light Weight Aggregate Concrete Preparation and Durability Research
Cellulose Tris(3,5-Dimethylphenylcarbamate) Regioselectively Bonded to Small Pore Silica Gel as Chiral Stationary Phase for HPLC
Evaluation on the Corrosion Resistance Improvement by Dipping to Inhibitor Solution of Galvanizing Steel
Preparation, Characterization and Thermal Behavior of Copper(II) Complex with 1-(6-Hydroxynaphthalen-2-Yl)butane-1,3-Dione
Preparation and Characterization of Konjac Glucomannan Gel
Oxidation Behavior in Super-Plastic Microforming of Zr65Cu17.5Ni10Al7.5 Bulk Metallic Glass
The Thickness Testing Technology of the Metal Base and Anticorrosion for Double Coating Corrugated Sheet Steel Beams for Guardrail
The Relationship between the Free and the Bound Chloride in High Performance Concrete
Study on Strength Reduction Method Based on Hinge Joint Concrete Block Slope Stability
Description of Planer Anisotropy and Cyclic Plasticity Behavior of Aluminum Sheet Based on Crystal Plasticity Theory
A Study of Polyvinyl Chloride Modified by Barium Sulfate
Effect of K / Na on Primary Boride of Hypereutectic High-Boron Alloy
Preparation and Evaluation of Fe2O3/Ceramic Composites for Flue Gas Desulfurization
Preliminary Study on High Efficiency Deinking Agent of ONP
A Contrastive Study between Chinese Traditional and Western Classical Column within Style Decoration
Study of Selecting Proper Chitosan from Various Chitosan Sample as Paper Strengthening Agent
Study on the Effect of Surface Coating on Thermal Manikin's Repeatability
Drug Release Behavior from a pH/Temperature Sensitive Hydrogel of Poly(N-Acryloylglycine) and Chitosan
Synthesis and Characterization of Thermoplastic Biomaterial Based on Acylated Chitosan Oligosaccharide
Research on Application of Phosphorus Slag in Cement
Efficient Adsorption of NH4+ Ions on Modified Fly Ash/EPDM Environmentally Friendly Composite
Chapter 8: Material Processing Technology
Microstructure and Mechanical Properties of Mg-9Al-6.5Ca-3Zn-0.6Mn-XNd Alloys Prepared by Spray Forming
Study on Processing Technology for Mold Cavity Parts
ADAMS-Based Braking System of a Tracked Vehicle to Optimize Mechanical Linkage Design
Gravity Anomaly Computed by GOCE Data in Northeastern Margin of Tibetan Plateau
Investigation of Cutting Model in Machining of Al/SiCp Metal Matrix Composite
Physical Simulation of Grooved Axis Warm Surface Rolling
Slope Instability Risk Analysis in Earth Dams Considering Uncertain Factors
Research on Technological Mineralogy of Refractory Hematite Ore
Experimental Investigation on Surface Integrity in Grinding Titanium Alloys with Small Vitrified CBN Wheel
Microscopic Mechanism Research of T10 Steel Accumulated Plastic Deformation in Low Stress Load
Comparative Analysis of Automotive Interior Trim Materials Based on Moldflow
Prediction of Edgewise Compressive and Side Tensile Elastic Modulus of Core Materials of Ripple Structure Sandwich Composites
Study on Machining Dental Implants by Whirling Approach
Analysis and Simulation on the Connection Strength of Flareless Tube Fittings
Microencapsulation of Cajuput Oil by Spray Drying: Influence of Wall Systems on the Oil Retention and Storage
Effect of Solidification Pressure on Secondary Dendrite Arm Spacing of Aluminum Alloy
Study on State Recognition of ASCE Benchmark FEM Based on Lyapunov Exponent Spectrum Entropy
Floating Grains in the HDC Casting 7075 Aluminum Alloy Ingot
Finite Element Analysis and Topology Optimization of the Clamping Unit in a Two-Platen Injection Machine
Static Analysis of Curved Beams with Clamped-Clamped Ends under Thermo Load
Study on the Influence Factors of Real Estate Price Based on Regression Model - The Case of Jilin City
Review of Research on Special Load and Vibration Behavior of Shaft Tower Structure
Experimental Study on Dynamic Modulus Master Curve of ATPB Mixture
Optimization of Cutting Parameters on Turning Process Based on Surface Roughness Using Response Surface Methodology
The Deformation Simulation of the Laser-MIG Hybrid Welding in Fillet-Welded Joint
The Recrystallization Simulation of H-Beam Rolling Process
Checking Gypsum as Structural Material
Design and Optimization of the Deposition Baffle Shape for Magnetron Sputtering
Design of Parking Control Systems Based on Wireless Sensor Network
Influence of Surface Treatments on Fretting Fatigue Life Prediction in TA15
Effects of Enzymatic Modification of Masson Pine Mechanical Pulp on Fiber Morphology and Pulp Properties
CTOD Testing and Evaluation for Weld Joint for Heavy Thickness Offshore Structure Steel S355G10+N
Burr Minimization in Shaping of Aluminium Alloy-Through Experimental and Stress Analysis Approach
Research on Modification of Bentonite and its Printing Quality when Used in Color Ink-Jet Paper
Analysis on the Distribution Law of WC Particles during Centrifugal Casting Process
The Surface Roughness Modeling on Turn-Milling Process and Analysis of Influencing Factors
Finite Element Analysis of Materials Flow Behavior in Friction Stir Welding of 7075 Aluminum Alloy Plate
Research on Design for Comforts of Modern Residence
Finite Element Analysis and Experimental Study on Rubber Waveform Generator
Numerical Simulation Temperature Field of Laser Cladding Titanium Alloy
Research on Slope Deformation Regularity of the Badong Formation in the Three-Gorges Reservoir Area
Precision Forming and Die Design for Octahedral Shell of Static Stents
A New Nitriding Process of 4Cr5MoSiV1 for Extrusion Die
Numerical Simulation of the Cold Expansion and Residual Stress Relaxation for Aluminum Alloy 7050
Microstructure of Flame-Spray Welded Ni-Based Alloy Coating and Base Metal
Investigation of the Effect of Heating-Lines on Tensional Mechanical Properties of Sheet Metal after Laser Forming
CDM Model and its Application to Numerical Simulation on Rotating Band's Engraving Process
Research on Fire Performance of a Profiled Light Aggregate Concrete Composite Floor
Identification of Subsurface Deformation in Machining of Inconel 718
Superplastic Behavior and Constitutive Equation of AZ31B Magnesium Alloy
Effect of Underlay Rigidity on Breaking Behavior of Aluminum Sheet during Wedged Shearing Process
A New Porous Mullite Nozzle for Refining Molten Aluminum
Influence of Cooling Rate on the Microstructures and Properties of Q550
Milling Parameters Optimization by Grey Relation Theory
Study on Simulation of Dispersing Uniformity of Aluminum Alloy Melt in Rheo-Casting Mold
Influence of Friction on Metal Flow Behaviour and Die Stress of Backward Extrusion
Numerical Study on the Relationship of the Axis Orientation of Deeply Buried Circular Tunnel and the Direction of Horizontal In Situ Stress
The Force Theoretical Analysis and Experiment for Wire Saw with UVM Cutting SiC Monocrystal
Study on Registering Accuracy and Precision in Test of Printing Press
Numerical Simulation on the Microstructure of Small Electroslag Remelting Ingot
The Experiment of CO2 Pollution and Treating in Silicate-Based Drilling Fluids
Study on Borehole Stability in Haita Basin
Experimental Study on Frost Resistance of the Shale Ceramsite Concrete
A Novel Approach in Improving I/O Performance of Small Meteorological Files on HDFS
Influence of Microstructure of TC4 Titanium Alloy on Ultrasonic Velocity and Attenuation
Critical Strain Model of Cr4 Steel for Heavy Supporting Roller
The Boundary Element Method to Solve the 2D Elastic Stress and Displacement Problem
The Study on Harmonic Characteristics of Three-Phase SPWM Inverter
Energy Consumption Analysis of Cooling System in Jiahe Deep Coal Mine
Study on Determination of Friction Model at the Tool-Chip Interface of Titanium Alloy Ti6Al4V Based on Orthogonal Cutting
Effect of Cold Reduction Ratio and Annealing Temperature on Microstructure and Mechanical Property of Added Phosphorus High Strength Nb-IF Steel
The Mathematical Model of Online Quenching for Extruding Bar of 6061 Aluminum Alloy
Study on a Model for Perceived Text Definition of Multi-Stroke Chinese Character
Study on the Influence of Deforming Velocity on Steel Ball Quality Based on DEFORM
An Airflow Field Finite Element Analysis of the Seed Adsorption Hole of Pneumatic Seeder
Study on Corrosion Resistance of High-Entropy Alloys NiCoCrFeMnCuC in Medium Acid Liquid
The Influences of Interface Properties Weakening on Bearing Behavior of Pile Foundation
Multi-Feature Fusion Based Object Detecting and Tracking
Hydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed Dryer
Effect of Initial Particle Size on Coarsening Kinetics of Prime Precipitate in Nickel-Based Superalloy - A Phase Field Study
A New Method to Accurately Describe Cross-Section Distortion in Rotary Draw Bending Process of Thin-Walled Rectangular Tube
An Experimental Study on Electric Hot Milling for T10A Tool Steel
The Analysis on Structure of U-Shaped Compartment Based on Soil Mechanics Principle
Study on a Method for Vibration Control of the Aeronautic Thin-Walled Workpiece in High-Speed Milling Process
Study of Post-Fire Behavior of a Profiled Sheet-Ceramsite Concrete Composite Floor
Numerical Simulation on Back-Extrusion Loadcase of Magnesium Alloy Wheel
Chapter 9: Welding and Mechanical Connections and Fracture
Analysis of the Relationship between CTOD Toughness and Micromechanism of Marine Steel Weld Joints
Experimental Study on the Effect of CGHAZ Microstructure on CTOD of High-Strength Steel EQ56
Neural Network Based Toughness Prediction in CGHAZ of Low-Alloy Steel Produced by Temper Bead Welding
A Study of Fuzzy Neural Networks Control for the Quality of Resistance Spot Welding
Interface Microstructure and Weld Strength of Steel/Aluminum Alloy Joints by Resistance Spot Welding
Effect of Activating Flux and Welding Parameters on Performance of Aluminum Alloy Weldment in GTA Welding Process
Effect of Microstructure on CTOD of Welded Joints for Offshore High-Strength Steel
「Nielsen BookData」 より