Materials and manufacturing technologies XIV : selected, peer reviewed papers from the 14th International Conference on Advances in Materials and Processing Technologies (AMPT 2011), July 13-16, 2011, Istanbul, Turkey
Author(s)
Bibliographic Information
Materials and manufacturing technologies XIV : selected, peer reviewed papers from the 14th International Conference on Advances in Materials and Processing Technologies (AMPT 2011), July 13-16, 2011, Istanbul, Turkey
（Advanced materials research, v. 445）
Trans Tech Publications, c2012
- : pbk.
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This special issue of Advanced Materials Research contains a selection of high-quality research papers presented at the 14th International Conference on Advances in Materials and Processing Technologies (AMPT) held in Istanbul, Turkey, on July 13-16th, 2011. The papers are related mainly to materials and processing technologies, and the aim of the book is to provide a basis for the identification of new research and development needs in the fields of advanced engineering materials and manufacturing technologies.
Table of Contents
Preface and Organizing Committee
Chapter 1: Deformation Processing
Finite Element Modelling in Ultrasonic Sheet Metal Forming
Detecting Impact Damages in an Aramid/Glass Fiber Reinforced Hybrid Composite with Micro Tomography
An Investigation into Hydroforming of an X-Shape Pipe Connection
Multiobjective Optimization of Milling Tool Geometry for Chatter Suppression and Productivity Improvement
A Case Study on Quality and Productivity Optimization in Electric Discharge Machining (EDM)
Experimental Investigation of the Rubber-Filled Tubes in the Tube Inversion Process
Investigation of Weld Line Movement in Tailor Welded Blank Forming
Shape Evolution of Pinholes in Bloom with Multi-Scale Finite Element Technique
Mathematical Modeling of Cutting Force in Milling of Medium Density Fibreboard Using Response Surface Method
A Slip-Line Approach to the Micro-Cutting Process with a Rounded-Edge Tool
Micro-Milling of Hardened AISI D2 Tool Steel
Bending Effect on Cutting Characteristics of Polycarbonate Thick Sheet Subjected to Indentation of Heightwise-Asymmetric Wedge Blades
A Study on the Development of Dedicated FEA Tool for Roll Forming of Asymmetrical U-Channel
Vibration Drilling Process on Al2024
The Study of EDM Parameters in Finishing Stage on Electrode Wear Ratio Using Hybrid Model
Surface Roughness Prediction Model in Machining of 34CrMo4 Steel with Several Tools Using Response Surface Methodology
Evaluation of Draw Bead Geometry on Deep Drawing of Complex Rectangular Shape Part
Numerical Study of Hand Disc Grinding of Ni-Base Alloy 690
Die Design of Aluminum Bipolar Plate Fabrication by Stamping Process and its Investigation
Novel Spring and its Manufacturing Process for Semi Auto Sliding Mechanism to Maximize Function and Minimize Thickness of Portable Application
Application of Separated Die Design to Production of Ecap Dies
A New Analytical Model of Heat Flux Distribution to Compute Residual Stresses in the Case of External Cylindrical Grinding Process
A New Nondestructive Test Equipment Based on Image Processing and Magnetic Flux Analysis
Effects of Process Parameters on Surface Quality in Turning of Mild Steel with Rotary Cutting Tool
Effect of Punch Profile on Thickness Distribution in Hydromechanical Deep Drawing of Conical-Cylindrical Parts
Study of the Effect of Material Properties and Sheet Thickness on Formability of Conical Parts in Hydro-Mechanical Deep Drawing Assisted by Radial Pressure
Upper Bound Analysis and Finite Element Simulation of Bi-Metallic Tube Backward Extrusion
Development of Advanced Broaching Tool for Machining Titanium Alloy
An Analytical Model for Chemical Etching in One Dimensional Space
Effect of Melt Quality and Quenching Temperature on the Mechanical Properties of SIMA 2024 and 7075
Constructing Surrogate Models for Springback in U-Bending Process
Chip/Tool Interaction during Dry Machining of the TA6V Alloy
Impact Behaviour of Composite Materials by Using Low and High Speed Impact Tests
Mechanical Properties of Equal-Channel Angular Extrusion-Processed Al-20Zn Alloy
A New Approach to CNC Milling Machine Spindle Design
In Situ Temperature Measurement in the Shearing Zone during Sheet Metal Blanking
Statistical Evaluation Tensile Properties of High-Density Polyethylenes
The DMA, TG/DTA and FT-IR Characteristics of Wood Polymer Composites
A New Control Method for Using Inkjet Printer Motherboard as 3 Axes CNC Router's Motion Control Card
Finite Element Analysis of Rim Ring Rolling Forming of Bicycle Aluminum Alloy
Effect of Extrusion Ratio on Microstructure and Mechanical Properties of As-Cast AZ91D Magnesium Alloy
Investigation of Micro/Milli Flexible Deep Drawing Process
A Study of Preform Design on Backward Extrusion for Improved Hardness Distribution
Application of Abductive Network and FEM to Predict the Optimal Blank Contour of an Inner Elliptic Flange from Flanging
Cutting Forces in Dry Machining of Aluminum Alloy 5083 with Carbide Tools
Bearing Design Simulation in Direct Extrusion of AA2024 Using Finite Element
Deformation Texture Evolution of Low Carbon Steel with Heterogeneous Structure
Chapter 2: Forming in Melt or Near Melt Condition
Influence of Aging Temperatures and Times on Mechanical Properties of Vacuum High Pressure Die Cast Aluminum Alloy A356
Correlation between Mechanical Properties and Porosity Distribution of A356 in Gravity Die Casting and Low Pressure Die Casting
Investigation on the Microstructure and Mechanical Properties of New Al-Si Piston Alloys
Short Time Perturbation Solution for Thermoelastic Instabilities in Planar Solidification
Characteristics of As-Cast and Forged Biodegradable Mg-Ca Binary Alloy Immersed in Kokubo Simulated Body Fluid
Roll Casting of Aluminum Alloy Strip by a Single Roll Caster Equipped with a Scraper
Influence of the Processing Conditions on the Mechanical Properties of PA 6 - Halloysite Nanotubes Nanocomposites for Injection Moulding
Influence of Packing Phase Parameters in the Optimization of Mechanical, Weight Reduction and Dimensional Properties of Microcellular Foaming Injection Molding of Polypropilene
Effect of Mold Coating on Shell Morphology in Solidification
Usability of Boron as an Alloying Element in Gray Cast Iron Rollers and its Effect to Abrasive Wear Behaviour
Morphological Instability in Early Stages of Solidification of Pure Metals Part I: A Theoretical Model
Morphological Instability in Early Stages of Solidification of Pure Metals Part II: Experimental Analysis
Casting Quality of Gypsum Bonded Block Investment Casting Moulds
Chapter 3: Powder Forming
Optimizing the Sintering Parameter of Metal Injection Molding Compact Using Robust Engineering Technique
Modelling of Powder Forming Processes in Transient-Dynamic Analysis of Large Plastic Deformations
Simulation of Ceramic Powder Injection Moulding Based on the Behavior of Flow Stress Depended on the Thermal Viscosity Flowage Property and the Volume Fraction
Metal Injection Moulding of ZK60 Magnesium Alloy Powder Using Palm Stearin Based Binder System
Drawing of Piezoceramic Fibers and Ribbons Using a Novel Alginate Gelation Method and Properties of Fiber and Ribbon-Based Piezodevices
The Properties of Lattice Structures Manufactured Using Selective Laser Melting
Chapter 4: Laser Processing
Flexural Characteristics of Tapered Bar in Relation to Taper Angle Measurements
Laser Cutting of Ceramic and Thermal Efficiency Analysis
Effect of Laser Welding Parameters on Forming Behavior of Tailor Welded Blanks
Temperature Distribution Simulation for Pulsed Laser Spot Welding of Dissimilar Stainless Steel AISI 302 to Low Carbon Steel AISI 1008
Investigations on the Microstructure and the Fracture Surface of Pulsed Nd: YAG Laser Welding of AISI 304 Stainless Steel
The Effects of Position of the Laser Beam on the Pulsed Nd: YAG Laser Weld Microstructure of AISI 630 and AISI 321 Stainless Steels
Factors Influencing on the Dimensions Accuracy in Laser Cutting
Laser Processing of Quartz for Microfluidic Device Fabrication
Laser Cutting of Thin Aluminum and Silicon Alloy: Influence of Laser Power on Kerf Width
Experimental Investigation of Laser-Drilled Holes Variations Depending on Laser Drilling Parameters
Modeling of Weld Lap-Shear Strength for Laser Transmission Welding of Thermoplastic Using Artificial Neural Network
Chapter 5: Processing of New and Advanced Materials
Porous Hydroxyapatite-Zirconia Composites Prepared by Powder Deposition and Pressureless Sintering
Properties of Montmorillonite-Reinforced Thermoplastic Sago Starch Composites
Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite
Processing, Structural and Electrical Properties of Textured Potassium Strontium Niobate (Ksr2Nb5O15) Piezoceramic Fibers
Modeling of Functionally Graded Thermopiezoelectro-Magnetic Materials
Preperation of Lead-Free Potassium Sodium Niobate Based Piezoelectrics and their Electromechanical Characteristics
Perovskite Based Anode Materials for Solid Oxide Fuel Cell Application: A Review
Ultra-Mild Wear of Al2O3 Fibre and Particle Reinforced Magnesium Matrix Composites
The Effects of Clay Content and Sonication Time on Water Uptake in Epoxy-Organoclay Nanocomposites
Manufacturing of Thin-Shell Offset Demonstrator Reflector
Modeling and Placement of Thermopiezoelectro-Magnetic Materials
Processing and Thermal Conductivity Characterization of Solid Glass Micro-Spheres Filled Polymer Composites
Investigation of the Improvements on Mechanical Properties and Thermal Performance of MgO-MgAl2O4 Composite Refractories by Additions of ZnO-Al2O3 to MgO
Microstructural Characterisation and Investigation of the Effects of ZrSiO4-Y2O3 Additions on Corrosion Behaviour of MgO-Spinel Composite Refractories
Investigation of Mechanical Performance of Squeezed Magnetorheological Fluid Using Response Surface Method
Bending Fatigue Behaviour of Laminated Sandwich Beams
Use of Porous Alumina Bioceramic to Increase Implant Osseointegration to Surrounding Bone
Simulation of Friction Stir Processing with Internally Cooled Tool
Production of a Helicopter Tail Boom and Associated Mechanical Tests
Investigation of Polyaniline Nanocomposites and Cross-Linked Polyaniline for Hydrogen Storage
The Strain Energy Tuning of the Shape Memory Alloy on the Post-Buckling of Composite Plates Using Finite Element Method
Influence of Mesh Density and Element Type on the Accuracy of FE Analysis of Periodic Cellular Structures
Coupled Structural/Thermal Analysis of Cylindrical Part of Multilayered Composite Vessel
Wear Assessment of Ti/SiC Surface Nano-Composite Layer and its Associated CP-Ti Substrate
Material Selection and Process Design Optimization Framework under Closed-Loop Supply Chain
Permeability of Rapid Prototyped Artificial Bone Scaffold Structures
Chapter 6: Surface Engineering
Laser Nitriding of Titanium Alloy and Fracture Toughness Measurement of Resulting Surface
HVOF Coating of Metallic Surfaces Using Different Powders: Fracture Toughness Measurement of Resulting Surfaces
Thermal Stresses in Thick Walled Cylinders due to a Periodic Moving Heat Source: Effect of Material Properties
Influence of Process Parameters on the Mechanical Enhancement of Copper-DHP by FSP
The Effect of Sodium Silicate Concentration on the Properties of the Coating Formed on Pure Zirconium by Microarc Oxidation Coating Technique
Tribological Properties of Vanadium Nitride Coated AISI 52100 Steel
Oxidation Kinetics of Chromium Carbide Coating Produced on AISI 1040 Steel by Thermo-Reactive Deposition Method during High Temperature in Air
Incorporation of TiC Particulates on AISI 4340 Low Alloy Steel Surfaces via Tungsten Inert Gas Arc Melting
The Influence of Major Defects on the Properties of Continuous Galvanized Steel Sheet
Morphological and Structural Properties of NbN Thin Films Deposited by Pulsed Laser Deposition
Wear Mechanism of ADI
Hydroxyapatite Coating on Cp-Ti Implants by Biomimetic Method
Zirconia-Hydroxyapatite Composite Coating on Cp-Ti Implants by Biomimetic Method
Yttria-Doped Zirconia-Hydroxyapatite Composite Coating on Cp-Ti Implants by Biomimetic Method
Study of Surface Melting of Pre-Plasma Sprayed WC-14%Co Low Carbon Steel
Microstructure Characterization of Low Carbon Steel Used for Galvanization
XPS and AES Study of Oxygen Interaction on the Surface of the ZrNi Intermetallic Compound
Chapter 7: Welding
Grain Refinement in Medium Chromium Ferritic Stainless Steel Welds via Aluminum Powder Addition
Parametric Study of Carbide Precipitation in 16wt% Chromium Ferritic Stainless Steel (FSS) Welds
Weldability Windows for Explosive Cladding of Dissimilar Metals
Influence of Material Properties in Explosive Cladding of Dissimilar Metals
Effect of Tool Rotation Speed and Feed Rate on Friction Stir Welding of 1100 Aluminum Alloy to Carbon Steel
Effect of Tool Material and Offset on Friction Stir Welding of Al Alloy to Carbon Steel
Dissimilar Friction Stir Welds in AA 5086-AA 2024: The Effect of Process Parameters on Microstructures and Mechanical Properties
Investigation on Wettability and Metallurgical and Mechanical Properties of Cemented Carbide and Steel Brazed Joint
Effect of Process Parameters and Tool Coating on Mechanical Properties and Microstructure of Heat Assisted Friction Stir Welded Polyethylene Sheets
Experimental and Finite Element Modeling of Friction Stir Seal Welding of Tube-Tubesheet Joint
Weldability of New Ferritic Stainless Steel for Exhaust Manifold Application
Structure and Stresses of Large Size Brazed Joints of Cermets and Steel
Influences of Tool pin Profile and Tool Shoulder Curvature on the Formation of Friction Stir Welding Zone in AA6061 Aluminium Alloy
Chapter 8: Nano Technology
Graftfast (c): Towards the Control of Surface Properties of any Type of Materials by the Grafting of Polymers
Arc Spraying of Nanostructured Wires on Steel Surfaces: Influence of Coating Thickness on Microstructure and Fracture Toughness
Fabrication of Graphene Platelet (GPL)-Epoxy Nanocomposites and Characterization by Nanoindentation
Effect of Milling Time and Annealing on the Mechanical Response of Mechanically Milled Aluminium
Preparation of Pure Silica Oxide (SiO2) and Zeolite Y from Rice Husk as an Ion Exchanger for Emergency Water Treatment System Using in Flood Affected Area
Synthesis and Mechanical Properties of a Novel Al/ -Al3Mg2 Nanocomposite Prepared by Mechanical Alloying Process
Preparing of CaCO3 Nano-Particles by Mechano-Chemical Method
Chapter 9: Other Related Process
The Effects of Tool Geometry on Machinability of Textile Fabric Reinforced Termoplastic Matrix Composites
Onset of Progressive Buckling by Inertia Force in Axial Impact of Straight and S-Curved Square Tubes
Artificial Dry Heat Temperature Effects on Tensile Properties of Chlorinated Poly (Vinyl Chloride)
Testing for Green Compression Strength and Permeability Properties on the Tailing Sand Samples Gathered from Ex Tin Mines in Perak State, Malaysia
Performance of Micro-Hole Drilling by Ultrasonic-Assisted Electro-Chemical Discharge Machining
Systematical Design of a Refrigerator Foot Height Adjustment Device
Mechanical Characterization and Modeling of Cyclic Behavior of Ultra High Molecular Weight Polyethylene (UHMWPE)
Experimental Investigation on Wear of FDM Processed Part
Fabrication, Mechanical Characterization and FTIR Spectroscopic Analysis of Fish Scale Reinforced Epoxy Composites
A Method of Analysis to Estimate Thermal Down-Shock Stress Profiles in Hollow Cylinders when Subjected to Transient Heat/Cooling Cycle
Investigation Using Simulations for the Development of Low Cost Catalytic Converter from Non-Precious Metals
A Multi-TAD Framework for Recognizing Machining Features Using Hint Based Recognition Algorithm
Mechanistic Model of Work-Piece Diametrical Error in Conventional and Ultrasonic Assisted Turning
Theorical Analysis of Leakage in High Pressure Pipe Using Acoustic Emission Method
A Surface Roughness Study for Machining of Udimet500 Superalloy, through Statistical Analysis of Influential Parameters
Effect of Stress Frequency and Chemical Medium on the Corrosion-Fatigue Behaviour of 316L Stainless Steel
Influence of the Recycled Material Percentage on the Mechanical Behaviour of HDPE for Injection Moulding Process for an Ecologycal Design
Wear Monitoring of Connecting Rod Bearing via Air-Borne Method Analyzed by Using I-KazTM Multi Level Value
Resource Allocation and Job Dispatching for Unreliable Flexible Flow Shop Manufacturing System
Automatic Machining Setup Generation for Prismatic Components
Low Velocity Impact Resistance of CPVC Pipes Exposed to Natural Outdoor Weathering Conditions
Effect of Deep Cryogenic Treatment on the Microstructure of an Aerospace Aluminum Alloy
A Virtual Prototyping System for Additive Manufacturing Process Development
The Effect of Loading History on Unstable Fracture of Austenitic Steel (304)
Sintering Effect on Boron Based Bioglass Doped Composites of Bovine Hydroxyapatite
Influence of Tool Material on the Electrical Discharge Machining of AISI H13 Tool Steel
Correlation of Input Parameters with Tool Martial on the Output Parameters of Electrical Discharge Machining Process
Joint Stress Optimization by the Hybrid Adhesive Lap Joint
Optimisation of Geometric Parameters of Gears under Variable Loading Condition
A Powered Technique for Inserting Acetabular Cups
Interacting Fatigue Crack Growth Analysis with Boundary Cracklet Method
New Model for Interlaced Yarns in the Ballistic Impact of Flexible Body Armors
Just-In Time Production System Using Fuzzy Logic Approach and a Simulation Application
Modeling the Hydrodynamic Lubrication Function of Scrapings in Machine Tool Slideways
An Investigation of Lateral Surface Hardness and Related Cutting Forces in One-Directional Ultrasonic-Vibration Assisted Turning
Failure Analysis of Heavy Industrial Gas Turbine Engine First Stage Nozzel Guide Vane
IC Tomography and Infrared Tomography Techniques to Monitor Defect Sites in Palm Tree Trunks
Product Improvement with Quality Function Deployment (QFD) Technique
Correlating Strain and Acoustic Emission Signals of Metallic Component Using Global Signal Statistical Approach
Investigation of Rotation Elastic Boundary Condition on the Pull-In Instability of Electrostatic Torsional Actuators
Martensitic Phase Transformations in CuAlNi Shape Memory Alloys
Investigation of the Dynamic Behaviors of Cranes under Seismic Effects with Theoretical and Experimental Study
Modeling and Dynamic Response Analysis of an Point Supported Plate by Using ANSYS and MATLAB
Torsional Wave Propagation in Sandwich Hollow Cylinder with Pre-Strained Face (Core) Layers (Layer)
by "Nielsen BookData"