Future material research and industry application : selected, peer reviewed papers from the 2011 SSITE International Conference on Future Material Research and Industry Application (FMRIA 2011), December 1-2, 2011, Macau, China

著者

    • SSITE International Conference on Future Material Research and Industry Application
    • Thaung, Khine Soe

書誌事項

Future material research and industry application : selected, peer reviewed papers from the 2011 SSITE International Conference on Future Material Research and Industry Application (FMRIA 2011), December 1-2, 2011, Macau, China

edited by Khine Soe Thaung

(Advanced materials research, v. 455-456)

Trans Tech Publications, c2012

  • : [set]
  • Part 1
  • Part 2

大学図書館所蔵 件 / 1

この図書・雑誌をさがす

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). These 278 peer-reviewed papers selected from the SSITE International Conference on Future Material Research and Industry Application (FMRIA 2011), held on December 1-2, 2011, in Macau (China), are grouped into the chapters: industrial engineering and materials science, applied chemical engineering, mechanical engineering and computer science, biomaterials science and environmental engineering, applied mechanics and structural engineering. The work is an excellent guide to the current state-of-the art of these subjects.

目次

Preface and Organizing Committee Chapter 1: Industrial Engineering and Material Science Research on Melting and Solidification Process of Phase Change Storage Energy Materials Investigation into Hardness and Young's Modulus of Thin Films of Lead Germanium Telluride Efficient Synthesis, Properties of a Novel Unsymmetrical Photochromic Diarylethene Based on Benzothiophene and Thienyl Group Synthesis, Photochromism and Fluorescence of a Novel Diarylethene Having Thiazole Unit Synthesis and Property of a New Photochromic Diarylethene Bearing both an Isoxazole Unit and a Methoxy Group Synthesis, Properties and Application in Optical Memory of a New Photochromic Diarylethene Based on a Chlorine Atom Synthesis, Photochromism and Optical Recording of a New Diarylethene Efficient Synthesis and Photochromic Properties of a New Diarylethene Bearing a Condensed Aromatics Moiety Efficient Synthesis of a New Unsymmetrical Photochromic Diarylethene for Optical Recording Storage Synthesis, Properties and Application in Optical Memory of a Photochromic Diarylethene Bearing Pyridine Unit Modes Excitation by Input Field of Different Positions in Three-Mode Photonic Crystal Waveguides Fabrication of Nano-Al2O3/Ni Composite Particle with Core-Shell Structure by a Modified Electroless Plating Process Feasible Study of Fire-Resisting Wood Material in Habitability Design of Large Surface Vessels Study on Mechanism of Molybdenum Concentrate Roasting Impact of Immersion Depth of Ultrasonic Horn on Acoustic Field Distribution Using Thermoelectric Probe A Research on Separation Mechanism of Cylindrical Hydrocyclone Numerical Simulation of Heat and Mass Transfer of Lump Coal Falling in the Freeboard Zone of COREX Melter-Gasifier Preparation and Characterization of Cuprous Chloride Catalyst for Direct Synthesis of Triethoxysilane Fabrication of Lignin-Wrapped Carbon Nanotubes and its Dispersion in ABS Resin Effect of Siderite on Reverse Flotation of Dong Anshan Iron Ore Containing Carbonates Enhancement of Absorption of Injected Gas in New Type Mechanical Stirring Injection Refine Equipment Some Theoretical Problems Analysis of Melting High Nitrogen Stainless Steels Synthesis, Characterization and Photocatalytic Activity of Nb-Doped TiO2 Nanoparticles Preparation and Surface Modification of Fe3O4@Sio2 Composite Microspheres A Numerical Study on the Temperature Field of Oscillatory Flow Reactor with Conic Ring Baffles A Novel Process Employing Dividing Wall Column and Double Effect Distillation Effects of NaF on Mould Flux Properties for Thin Slab Continuous Casting Performance of a Solar Drying System Driven by a Hybrid Power System Study on the Strategy for Failure Diagnosis of Wall-Flow DPF Based on Pressure Drop Characteristics Molecular Dynamics Simulations of Coupling between Flow and Heat Transfer in a Nanochannel Frequency and Pressure Characteristics of a Helmholtz-Type Valveless Self-Excited Pulse Combustor Research on Permeability of Coal Samples with and without the Effect of Supercritical CO2 The Function of Sba-15 over Ni/Mo2C Catalysts for Carbon Dioxide Reforming of Methane Fatigue Simulation and Analysis on Planetary Gear of Megawatt Wind Power Yaw Reducer Contact Simulation and Analysis on Planetary Gear of Megawatt Wind Turbines Yawing Reducer Optimal Design Research of Post-Processing Technology Based on Settlement Control Two-Stage Optimal Design of Small Pile Composite Foundation Based on Consolidation Degree and Bearing Capacity Control Application of Lodrigues Matrix in Coordinate Transformation of Similar Material Simulation Experiment ADRC Applied in Micro Grid of Wind Turbine with Flywheel Test System for Mechanical Property of Geotextile Material Based on PCI-1714 Castor Capsule Sheller Key Component Design and Experimental Research CFD Simulation of Spraying with Air Jet Study on Whole Life Cycle Management of Cutting Tool The Experimental Investigation and Theoretical Analysis on Transcritical Carbon Dioxide Heat Pump Cycle The Internal Resistance Characteristics of Lithium-Ion Battery Based on HPPC Method Thermodynamic Analysis of Solar Driven Vuilleumier Cycle Heat Pump Formulation of a New Type of Electrolytes for LiNi1/3Co1/3Mn1/3O2 Cathodes Working in an Ultra-Low Temperature Range Preparation and Properties of Zno/Vermiculite Composite Particles Kinetic Characteristic of the Dust Particles around the Insulators Numerical Simulation for Heat Storage Study of the Microencapsulated Phase Change Material Slurry in a Horizontal Rectangular Enclosure The Energy-Saving Optimization of the Organic Heat Transfer Material Heater The Quenching Characteristics of Gas Deflagration Flame in Narrow Channel Numerical Study of Performances of Vertical Axis Tidal Turbines The Speed Coefficient Method Based Nuclear Main Pump Design and CFD Analysis Mechanical Properties of Forged Ti-6Al-4V Structure by Electron Beam Welding Numerical Simulation of the Nuclear Main Pump in the Sbloca Research on Effects of Diameter and Arrangement of Nozzles on Combustion and Emissions in Cylinder Investigation of Shapes and Extinction Limits of Premixed Flames in Large Centrifugal Acceleration Field Numerical Simulation on Small Scale Straight-Blade and Twisted-Blade Vertical Axis Wind Turbine Effects of Fuel Octane Number on Homogeneous Charge Compression Ignition (HCCI) Combustion with Rapid Compression Machine Computation of Turbulent Flows in Natural Gas Pipes with Different Rectifiers Effects of Difference Leading Edge Shapes on Numerical Simulation of Centrifugal Compressor Numerical Simulation of Flow and Heat Transfer Characteristics in Rectangular Channel with Novel Longitudinal Vortex Generators New Shape-Controlled Nanocrystalline SrSiO3 Photocatalyst: Template-Free Syntheses and Photocatalytic Activity Study on Effect of Hydrogen Environment on Stress Corrosion Cracking of Retaining Ring in Hydrogen-Cooled Generator Numerical Calculation and Simulation on Melting and Solidification Time Periods of a Phase Change Material Research on Mechanism of Sodium Silicate on Gas Quenching Steel Slag Cement Aerodynamic Optimization Design of a Turbocharger Compressor Impeller Vibration Characteristics Analysis of Tubing String in Three-High Gas Well Mechanism Analysis of Jet Drilling Rock by Numerical Simulation and Experiment Prediction of Hardness in Heat Affected Zone of 9%Ni Steel Diffusion Combustion Characteristics of H2/Air in the Micro Porous Media Combustor Different Solar Cell Performance under the Concentrator Conditions Chapter 2: Applied Chemical Engineering Influence of Chemical Modification of Activated Carbon Surface on Performance of Supercapacitors Modeling the Glass Transition Temperature of Polymers via Multipole Moments Using Support Vector Regression Prediction of Glass Transition Temperature of Polymer by Support Vector Regression Expression of Anthocyanin Biosynthetic Genes during Fruit Development in 'Fengxiang' Strawberry Study on the Isolation of High-Quality DNA and RNA from Aloe Antibacterial Activities of Antibacterial Proteins/Peptides Isolated from Organs and Mucus of Clarias Gariepinus Reared at High Stocking Density Study on Properties of Corn Starch-Based Fat Mimics Research of Monitoring Deterioration of Milk by Using Surface Tension Coefficient and Viscosity Screening of a L-Lactic Acid Producing Strain of Lactobacillus Casei by Low-Energy Ion Implantation The Research for the Extraction of Yeast'S Nucleic Acid with [BMIM] BF4-H2O-KH2PO4 Ionic Liquid Aqueous Two-Phase System Comparison of Non-Covalent Interactions between a Series of N-Phosphoryl Dipeptide or Methyl Esters and Cytochrome C by Electrospray Ionization Mass Spectrometry Allelopathic Potential and Chemical Components of Aqueous Extract from Soil-Like Substrate Purification and Fractionation of Natural Petroleum Sulfonates by Liquid-Liquid & Soxhlet Extraction Experimental Study of Purifying Precipitated Silica Produced from Yellow Phosphorus Slag Electrochemical Degradation Pathway of Phenol on Ti/SnO2 Anode Study on Mechanical Properties of Nanocompo-Sites Prepared Using Elastomeric Copolymers and Nano-SiO2 Electrical Conducting Properties of Unsaturated Polyester/Graphite Nanosheet Composite under Electric Field Structure Characterization of Unsaturated Polyester/Graphite Nanosheet Composite under Electric Field Structure Characterization of Polymer/Oriented Graphite Nanosheet Composite by Electric Field-Inducement Molar Kinetics in Catalytic Hydrocracking of Asphaltenes Kinetics and Selectivity of Cyclohexane Pyrolysis Synthesis and Characterizations of Monodispersed Nanotriangle of Gold Electrical Treeing Breakdown Properties for Polyimide Nanocomposite Film in Inverter-Fed Motors An Amphiphilic Acrylic Copolymer/Montmorillonite Nanocomposite Synthesis and Fluorescence Properties of Pyrazole Oxadiazole Derivatives Study on Modified Starch by Glutaraldehyde and its Properties and Application Study on Synthesis and Properties of a Starch-Polyacrylamide Graft Copolymer by HRP Preparation and Properties of Modified Starch with Methoxy Polyethylene Glycol Methacrylate Preparation and Properties of Copolymer of Degraded Starch and CA-HPA Initiated by HRP/H2O2/ACAC Preparation and Properties of Polycarboxylate Superplasticizer with Hydroxy Terminated Side Chains Synthesis of Polycarboxylate Superplasticizer with -Cyclodextrins as Side Chain Synthesis and Properties of Copolymer of Gallic Acid and Sulfamic Acid Catalyzing by HRP/ H2O2 Study of Reactive Precipitation in Vortex Impinging Streams Reactor The Synthesized Principle and Property of Several Extraction Agents for Germanium Energy-Saving Characteristics of Benzene-Toluene Mixtures in Heat Pump Distillation Column Synthesis of L-Azetidine-2-Carboxylic Acid Study on the Precipitation Polymerization of Acrylamide and Methacrylic Acid in Ethanol by Conductimetry: Phase- Separation Prior to Polymerization Effects of ZrO2 Fiber on the Mechanical Properties of Nano-ZrO2/Al2O3 Ceramic Composite Preparation of ZrO2 Composite Ceramics with High Thermal Shock Resistance Efficient Synthesis of Thieno [2,3-d] Pyrimidin-4(4H)-ones by the Aza-Wittig Methodology Purification of Polyether Polyols Made by Double Metal Cyanide Catalysis A Study of Predominated Pathway of Initial Processes in Chemical Vapor Deposition of Silicon-Carbide from Methyltrichlorosilane and Hydrogen System Synthesis and Luminescence Properties of Three Europium Complexes with Phenanthroline Derivatives and -Diketonates Adsorption Properties of Dye onto Mg/Al-CO3 Layered Double Hydroxide Influence of Photoinitiator Sensitometric Characteristic on Light-Thermal Sensitive Microcapsule Materials Adsorption Behaviour of PEGylated Gold Nanoparticles to Different Surfaces Probed by CV Monitoring Brilliant Blue-Functionalized Reduced Graphene Oxide with Excellent Stability and Solubility in Water Tm3+/Yb3+ Codoped YAG Glass-Ceramic Formed in Silicate Glass System Composition of Hydrogenated Vacuum Gas Oil Analysis by Gas Chromatography Mass Spectrometry Rapid Fabrication of ZnS Thin Film and Microsphere by Microwave-Assisted Chemical Solution Method Use Differential Pulse Voltammetry for Determining the 2,6-Ditertbutyl-4-Methylphenol in Jet Fuels Ultrasound Changes Solid-Liquid Leaching Equilibrium of Glycyrrhizic Acid from Glycyrrhiza Uralensis in Water Preparation and Electrochemical Investigation of LiCoPO4 Cathode Material for Lithium Ion Batteries Three-Dimensional Open-Framework Zinc Phosphite: Synthesis and Characterization Two-Dimensional Neutral Framework Generated from Mixed Organic Ligands: Structure and Magnetic Properties Solvent-Free Synthesis and Characterization of the Zn(II) Complexes with Amino Acid Schiff Base Synthesis, Crystal Structure and Fluorescence Spectrum Studies of Bromocoumarin Derivants: C10H5Br3O and C12H9BrO4 Study on Extraction of Shikimic Acid from Pine Needles of Pinus Elliottii Engelm by Means of Microwave Pretreatment Aging Behavior of Polyaspartic Polyurea under Salt-Fog Exposure Studied by Electrochemical Impedance Spectroscopy Studies on Surface Preparation Systems for Polyurea Protective Coating of Beijing-Shanghai High Speed Railway Bridge Concrete Beams Thermal Stress Influence on Adhesion of Polyurea Protective Coating Base on Substrate Processing System in High-Speed Railway Studies the Properties of Polyaspartic Polyurea Coated Concrete under Coaction of Salt Fog and Freeze-Thaw Preparation and Investigation on the Adsorption Behavior of Polyethylene Glycol Modified Sodium Alginate Porous Membrane Adsorbent for Cr(III) Ions Effect of Support on the Hydrogenation of Ethyl Lactate over Ruthenium Catalysts Conductomery Properties of Mixed Reverse Micelles with Amphiphilic Ionic Liquids Characterization and Thermal Degradation of Polyimide Derived from 5-amino-2(p-aminophenyl) Benzoxazole Monomer with Pyromellitic Dianhydride The Experiment Study on the Void Fraction in PPG Solution Study on Thermodynamics of MgO Based Desulphurizer Tunable Morphologies of Co2+-Doped Zno/Znal2O4 Composite Films Derived from Co2+-Substituted Layered Double Hydroxide Single Source Precursor ICP-AES Determination of 11 Kinds of Elements in High Grade Pipeline Steel The Experimental Study of Fennel Oil Separation and Purification Using Response Surface Analysis Recycling of Lead and Zinc from Gold and Silver Tailings Degradation of ABS in ABS/CaCO3 Composites during Reprocessing Fatty Acid-Starch Complex in the Application of Linerboard Surface Treatment Influence of Substrate Load on Polyhydroxyalkanoates (Pha) Accumulation by Unenriched Mixed Cultures from Excess Sludge Fermentation Liquid Research on Solvent Extraction Process of Coal for Direct Carbon Fuel Cells Liquid-Liquid Equilibrium for (Water + Palm Oil Biodiesel + Methanol) Ternary System at Different Temperatures Macro Kinetics of N-Phosphonomethyliminodiacetic Acid Catalytic Oxidation Syntheses of a Green Organic Phosphorescence Materials and Studies on their Photoluminescent Properties Fast Microwave Synthesis Lithium Vanadium Phosphate Using Peg as a Novel Carbon Source Research on Rechargeable Lithium Manganese Battery Material Electrochemical Roasting Performance Analysis Synthesis of 1-(4-Antipyrine)-3-(3-Nitroaniline)-Triazene and its Color Reaction with Mercury(II) A pH-Sensitive Poly (2-(Acryloyloxy) Propanoic Acid) Hydrogel and its Drug Release Behaviors Preparation of Soluble Chitosan by Mechnochemistry Process Measurement and Correlation of Solubility of LiBr in Binary Solvents Formed by Acetone and Water Using LIFAC Model Study on the Accurate Determination of Polycyclic Aromatic Hydrocarbons in Coal Tar Utilization QSPR Studies on n-Octanol/Water Partition Coefficient of Polychlorinated Biphenyls by Using Artificial Neural Network QSPR Study on the Soil-Water Partition Coefficient of Polychlorinated Biphenyls by Using Artificial Neural Network Preparation and Characrization of Tic/C Composite Fiber by Chemical Vapor Deposition Adsorption of Phthalate Esters from Aqueous Solution by Mg-Al Layered Double Hydroxide Thermodynamic and Kinetic Study on Lithium Bis(Oxalato)Borate Thermal Decomposition Reaction The Effect of Na-Ion on the Growth and Hydrogen Generation of Hydrogen-Producing Bacteria Yuan-3 Carbon Dioxide Reforming of Methane over Ni/Mo/La2O3-SBA-15 atalyst Application of Kaolin Solid Acid Catalyst in the Dethiophene from Coking Benzene A Study on Nox Reduction of SCR System in Heavy-Duty Diesel Engine to Achieve the Euro V Emission Limits Optimization of Preparation of Jujube Juice by Response Surface Methodology Role of the Cathode in a Novel Photo-Electro-Chemical Catalytic Reactor The Study on Ionic Liquids Oil-in-Water Emulsion Enhancing Carbon Dioxide Absorption Desulphurization of High Sulfur Coal by Mild Pyrolysis Combination with Magnetic Separation Numerical Simulation of Interior Flow Field of Reactor Coolant Pump under Station Blackout Accident Modeling of Thermal Effect of Chemical Reactions in Heap Bioleaching of Chalcopyrite CFD Modeling of the Mixing Process in a Curved Baffles Crystallizer Performance of Denitrifying Phosphorous Removal Process Employing Nitrite as Electron Acceptor and the Characterization of Dominant Functional Populations Studies on the Removal of Humic Acid by Electro-Flotation-Photocatalytic Oxidation of Suspended TiO2 Research on Features of Domestic Wastewater Treatment and Mechanism of Denitrification in Anaerobic MBBR Reactor Study of the Interference between the Diffuser Vanes with the Volute Tongue Studies on the Integration of 1.5th and 2nd Generation Fuel Ethanol Production from Sweet Sorghum Stalks: Economic Performance, Energy Consumption and Carbon Emissions Microstructural of Cr/MWCNT Composites and its Catalysis in Synthesis of Biodiesel Synthesis of Ethyl Acetate Catalyzed by Inorganic Salt Chapter 3: Mechanical Engineering and Computer Science The Study on Building Materials' Optimization Based on Fuzzy Technology An Experimental Study of Fatigue Crack Propagation of 16MnR Pressure Vessel Steel in Mode-I Constant Amplitude Loading Research on Shear Bearing Capacity of Reinforced Concrete Short Beam in Salt-Fog Environment Critical Knock Diagnosis for Gasoline Engines Based on Neural Network with Wavelet Transform and Fuzzy Clustering Simulation-Based Analysis of Articulated Steer Grader with Six Motor-Driven Wheels Model Test and Finite Element Analysis for the Pylon of the Jointed Pylon Cable-Stayed Bridge Fuzzy Comprehensive Evaluation of Performance of the Natural Gas Driven Vuilleumier Cycle Heat Pump Submarine Operation Tool and Intelligent Device Analysis of Vehicle's Kinetic Characteristic after Tire Blow-Out Optimization of Process Parameters of U-Shape Sheet Metal Based on Compensation of Geometric Springback Value Punching Teeth Layout on Steel Belt of the Box Based on Optimized Simulated Annealing Algorithm Adaptive Control of Synchromesh Shifting Process for Automated Manual Transmission Modeling Heat and Moisture Transfer within Porous Textiles under High Temperature Gradients Research on Defining Regional Boundary of the COREX Melter Gasifier by Using Image Processing Effect of Complex Agent on Copper Dissolution in Alkaline Slurry for Chemical Mechanical Planarization Effect of Colloidal Silica as Abrasive on Low-k Dielectric Materials in Chemical Mechanical Planarization Coupled Heat Transfer Simulations of Air-Cooled Turbines with an Algebraic Transition Model Optimal Design of High Power Linear Permanent Magnet Synchronous Motor for Aircraft Launch Gear Fault Diagnosis with Support Vector Machine Chapter 4: Biomaterials Science and Environmental Engineering Study on the Inclusion Complex of Rutin/Sulfobutylether- -Cyclodextrin A Improved Method for Study on Biodegradation of Castor Based Lubricants Determination of Hydrogen Peroxide Residue in Food Using CdS Quantum Dots as Fluorescence Probes Determination of Trace Iron in Chinese Herbal Medicine Using CdS Quantum Dots as Fluorescence Probes Preliminary Evaluation of Antimicrobial and Cytotoxic Activities of Extracts from Actinidia macrosperma Impacts of Uranyl Ion on the Structure and Function of Cytochrome b5 His39Ser Mutant Synthesis and Application of a Novel Polymer as an Antimicrobial and Water and Oil Repellent Finishing Agent for Cotton Synthesis of Myristyl Sulpho Betaine Type Amphoteric Surfactant Internalization of DMSA-Coated Fe3O4 Magnetic Nanoparticles into Mouse Macrophage Cells Treatment of Waste Phosphoric Acid Containing Metal Ions by Electrodialysis Separation of Liquiritin by Two-Dimensional Liquid Chromatography Mathematical Model and Equations of Wash Water Recycling in the Preparation of Layered Double Hydroxides Cu (II), Zn (II) Complexes Containing Calix [4] Arene Modified by Salicylaldehyde Acylhydrazone - Synthesis, Properties and Application Exergetic Assessment of Biogas Engine-Driven Heat Pump Systems for Using Sewage Resource Bm Lignin Structure and Chemical Compositional Characteristics of Switchgrass A Novel Application of Combined Bio-Technologies on Chemical Synthesis-Based Pharmaceutical Wastewater Component Analysis of the Sugar Cane Molasses Stillage Sediment Modeling of THMs and HAAs Formation in Distribution System upon Chlorination Review on Dynamic Membrane Reactor (DMBR) for Municipal and Industrial Wastewater Treatment The Progress of Research on Soil Heavy Metals Effects of N/P Atomic Ratio on the Growth of Alexandrium Tamarense at Various Initial Phosphate Concentrations Character and Model of Anaerobic Granular Sludge Formation in the Sanitary Landfill Effects of Herbaceous Plants on Hydrodynamic Characters of Runoff Water, and Runoff-Yielding and Sediment-Yielding Processes on Loessial Earth-Road Surface Soil Heavy Metal Concentrations and Leaf Accumulation in Four Subtropical Plant Species from South China A Multifunctional Drilling Fluid for Coalbed Methane Drilling Comparing the Influence of Two Different Natural Organic Matter Types on Colloid Deposition in Saturated Porous Medium Study of Device via Combined Filler for Ship Sewage Treatment Impact of CuO NPs to Alga Microcystis Aeruginosa: Effect of Dissolved Organic Matter Photodegradation of p-Nitrophenol Catalyzed by ZnO/MWCNTs Composite Catalyst in Water Sulfur Isotope Geochemistry of Sn-Polymetallic Depositsin Dafulou District of Guangxi Province, China Geological Characteristics of the Dafulou Tin-Polymetallic Sulfide Deposits in Guangxi, South China Preparation and Characterization of Nd-Doped Ti/SnO2-Sb2O5 Electro-Catalytic Electrodes Used for Reactive Brilliant Red X-3B Wastewater Treatment Comparison of the Temporal Heterogeneity of Soil Moisture of Different Ecosystems at Red Soil Hillside Fields Ore Genesis of Caixiashan Pb-Zn Deposit in Middle Tianshan, NW China Experimental Research on Contamination Dissolution-Releasing Characteristic of Coal Gangue in Soaking Operation Study on Treatment and Reuse of Wastewater from Yunnan Huize Pb-Zn Ore Flotation An Analysis of the Distribution of Arsenic Groundwater in Northern Suburbs of Zhengzhou, China The Pb-Zn Deposits and Mineralization during Cambrian in Chongqing Area of Yangtze Platform, China Deformation Characteristics and Mechanism of the West Wall of Beiyi Iron Open-Pit Mine in Hainan Province Lead Isotope of Sulfide Minerals from Dachang Ore Field of Guangxi (South China): Characteristic and Implication Impact of T8 Transgenic Rice Containing an Isopentenyl Transferase Gene on Soil Bacterial Biomass Research on the Migration Characteristics of Organophosphorus in Clay Research on Attenuation Effects of Plasma to Electromagnetic Waves and Influences to the Spacecraft Communication Chapter 5: Applied Mechanics and Structural Engineering Experimental Research on Compressive Age Strength of Ceramisite Concrete Stress Relaxation Damage Analysis for High Temperature Bolting Stress Relaxation Continuum Damage Constitutive Equations for Relaxation Performance Prediction Dynamic Characteristics of High Speed Vehicle Passing over Railway Turnout on Bridge Strategy of Triangulating Surface of the Hollow Cylinder Comparison Study of Engine Mounts Dynamic Properties of Engine Main Components Analysis of Impact of Tire Tread Groove Depth on Hydroplaning Risk Level Parametric and Controllable Shape Model of the Water-Lubricated Rubber Journal Bearing Damage Identification of Beam Structures Based on Genetic Algorithm and Sensitivity Analysis The Effect of Centrifugal Force and Coriolis Force on Vehicle-Flexible Bridge Vertical Vibration Research on Design Methods and Aerodynamics Performance of CQU-DTU-B21 Airfoil Design Method of the Parameters of Tools for Clinching Technology Modeling and Predicting Tensile Strength of Tungsten Alloy by Using PSO-SVR A Structure Optimization for Hooklift Arm Device Based on the Genetic Algorithm Study on a Pneumatic Automatic-Extendable Crash Energy Absorption System Intelligent Multi-Objective Optimization for High Strength Sheet Metal Forming Process of Body Part The Analysis of Factors Affecting Rock Strength of Sandstone Study on Duration for Perilous Rock to Form Viscous Property of Clay The Viscoelastic-Plastic Displacement Back Analysis of Rock Mass with Non-Stationary Parameters Evaluation of Rock Mass Permeability Based on Geometry Measuring Method in a Gold Mine Samarium-Neodymium and Strontium Systematics Applied to Calcite Veins in Dabashan Thrust and Fold Belt in China: Dating and Tracing of the Fluid Stability Analysis of Perilous Rock in Views of Damage and Fracture Mechanics Extraction of Gravity Anomalies Associated with Gold Mineralization: A Comparison of Singular Value Decomposition and Bi-Dimensional Empirical Mode Decomposition The Research of Formation Characters and Bit Optimization of Basalt in Niudong Block of Malang Sag Mechanical Analysis of Construction Process for Shallow Weaking Surrounding Rock Multi-Arch Tunnel Research on Modeling Method for Freezing Tunnel with Fractured Surrounding Rock Mechanism and Calculation Research on Excavation Deformation of High Layered Dip Rocky Slope Determination of Safe Mud Density for Soft Mudstone Formation in KI11-2 Structure Study and Engineering Practice on Cracks Control Measures for Concrete Face Slab of High CFRD Study on Effect of the Modified Hollow Microspheres on the Foam Ability and Stability of Fire Fighting Foam Characteristics of Circulating Fluidized Bed Evaporator with Vapor-Liquid-Solid Three-Phase Flow Research on Satellite Platform Vibration Compensation Method Based on Liquid Crystal Steering System

「Nielsen BookData」 より

関連文献: 1件中  1-1を表示

詳細情報

  • NII書誌ID(NCID)
    BB08966864
  • ISBN
    • 9783037853009
  • 出版国コード
    sz
  • タイトル言語コード
    eng
  • 本文言語コード
    eng
  • 出版地
    Durnten-Zurich
  • ページ数/冊数
    2 v.
  • 大きさ
    25 cm
  • 親書誌ID
ページトップへ