Advanced materials and engineering materials : selected, peer reviewed papers from the 2011 International Conference on Advanced Materials and Engineering Materials (ICAMEM2011), November 22-24, 2011, Shenyang, Liaoning, China
著者
書誌事項
Advanced materials and engineering materials : selected, peer reviewed papers from the 2011 International Conference on Advanced Materials and Engineering Materials (ICAMEM2011), November 22-24, 2011, Shenyang, Liaoning, China
（Advanced materials research, v. 457-458）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
This conference provided a platform for the presentation of cutting-edge work in the management of Advanced Materials and Engineering Materials. The 292 papers are grouped into the chapters: 1: Advanced Materials Science, 2: Engineering Research, 3: Materials and Information Technology, 4: Materials Processing Technology, 5: Mechanical and Computer Control, 6: System Analysis and Industrial Engineering, 7: Intelligent Mechatronics and 8: Signal Processing.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
目次
Preface
Chapter 1: Advanced Materials Science
The Effects of MgO Addtion on the Mechanical Properties and the Phase Composition of Al2O3-TiC-TiN Ceramic Materials
Production and Microstructure of In Situ Synthesized (Ti,W)C Reinforced Iron Matrix Composite
Effect of Ratio of Copper Fiber/Copper Powder on Electrical Conductivity and Hardness of Copper/Graphite/Phenolic Resin Composites
Pretreatment of Waste Fermented Liquid of Butanol by Flocculation
Research on Algorithms Performance about JSP Scheduling
The Synthesis and Ion-Exchange Property of Li+ Memorized Spinel Li2.5Ti1.375O4
Influence of Variation of Groundwater Level on Deformation of Subgrade Based on Hydromechanical Coupling
Study of an Inorganic Ion Exchanger Li2TiO3
An Architecture of Mobile Internet Base on Cloud Computing
Photoluminescence and Transparent Conductive Properties of the Al and Sb Codoped ZnO Thin Films Annealed in Different Atmospheres
Modeling of Giant Magnetostrictive Material Based on Multivariate Statistical Analysis
Research on the Strategies of Green Building Materials
Research on the Generation of Casting Model for Cast then Machined Parts
The Spindle Structural Optimization Design of HTC3250n NC Machine Tool Based on ANSYS
The Simulation Research of above Knee Intelligent Prosthesis Based on Computed Torque
Research on the Preparation and Rheo-Casting of A356 Al Alloy by LSPWES Process
The Measurement and Time Series Analysis of Loran C Ground Wave Propagation Delay
Research of IPv6 Transition Technology and its Department on Campus Network
Resonance Modes in Multiple Quantum Wells Structure of Two-Dimensional Photonic Crystal
Simulation of Fracture Behavior in the Microstructure of Ceramic Tool Materials
Virtual Impact Test for Aluminum-Alloy Wheel Based on Numerical Simulation Method
Visualization Study of CO2 Bubble Behavior in Passive Direct Methanol Fuel Cell
Network Capacity on-Demand
Experimental and Numerical Study on the Mesh Bumper by Hypervelocity Impact
Stress and Adhesion Determination of a Wedged Iron Film System by Buckle Morphologies
Structured Design and Residual Stress for Ni/Ni3Al Multi-Layered Sheet
Creep Age-Forming Experiment and Springback Prediction for AA2524
Mining Mobile Phone Messages in Mobile Social Network
The Practice on Science and Technology Innovation Capability Building in Large Central Corporation of China - An Example of the State Grid Corporation of China
Optimal Design of Breakout Prediction System of Slab Continuous Casting
Technology Research and Application of Dynamic Secondary Cooling of Continuous Casting
SiC Particles Concentration Dependent the Properties of Electroless Ni-P-SiC Coatings
Modal Analysis of Mast Section of Hoist Based on the Vibration Theory
Investigation of Passive Direct Methanol Fuel Cell (DMFC) at the Open Circuit Condition
Implementation of Lance Control in Top-Blown Copper Smelting Process Based on DCS
Growth and Characterization of Radial pn Junction Gaas Nanowire by MOCVD
Analysis of Hydrogen Content in Hydride Film by Elastic Recoil Method
Effect of Electric Current Pulse on Carbide in Hypereutectic High Chromium Cast Iron
Chapter 2: Engineering Research
Experimental Study on Residual Flexural Behavior of Reinforced Concrete Beams after Exposure to Fire
Method of Fuzzy Evaluation on Laser Menaces Identifying
The Methods of Laser Guided Signal Information Identification
Research of Quantum Algorithm for Adaptive Active Noise Control System
Weighted Reverse Hoelder Integral Inequality for the Result of p-Harmonic Type Equation
The Synthesis and Ion-Exchange Property of Li+ Memorized Spinel Li1.4Zn0.8PO4
Local Boundedness for Very Weak Solutions of Leray-Lions Equation
Higher Integrability for Weak Solutions to Obstacle Problems with Differential Forms
A Study in Functional Verification of ASIP
Preparation and Electromagnetic Wave Absorption Properties of Carbon Nanotubes-Titanium Dioxide Nanoparticles
Approach on the Survey Method for Sound Environment in Underground Spaces
The Interaction between Quantum Dots and Plasma or Blood Studied by Capillary Electrophoresis
Dynamic Modeling and Simulation of Stratospheric Airships
Preparation of Small Crystalline ZSM-5 and its Application in Conversion of Methanol to Aromatic
Simulation of the Properties of 1-Ethyl-3-Methyl-Imidazolium Chloride/Chloroaluminate Ionic Liquids: Concentration and Temperature Dependence
The Progress in Aluminum Foam Research in China
Design of Hydraulic Fault Diagnosis System Based on LabVIEW
A CuZnAl-Based Hybrid Material for the Direct Synthesis of Dimethyl Ether from Syngas
Multipath Reduction of Shaft Tower Monitoring with GPS in Mine
Effect of Casting Overheat and Rolling Temperature on Morphology of Sulfide in 30MnVS Steel
A Novel Gaussian Window Approach for Empirical Mode Decomposition
An Electronic Modle of Mems Disk Resonator
Solution-Based Synthesis of Hafnium Carbide (HfC) Powders
A Flexible Roll Forming on-Line Detection Algorithm Based on Machine Vision
Acoustic Imaging with Ambient Noise: Theory and Simulation
FEA Analysis on 600MPa TRIP Steel Variable Section Roll Forming with Protrusion and Hole
Track Simulation of Flexible Roll Forming Based on VC++ and OpenGL
Preparation and Degradation Properties of Hydroxyethyl Chitosan-g-Poly(D,L-Lactide) Copolymers
Ethanol Steam Reforming over La2O2CO3 Supported Ni-Ru Bimetallic Catalysts
Time-Dependent Deterioration of Carbon Fiber Reinforced Polymer Affected by Climatic Factors
Assessment Study on Impact of Pile Driving Vibration on Surrounding Houses
Effect of Aluminide Coating on Rapture Behavior of Ni-Based Superalloy GTD-111 in High Temperature
Corrosion Behavior of TWIP Steels in 3.5% NaCl Solution
Preparation and Evaluation of Antioxidative Peptide Fractions from Mytilus coruscus Protein
Preparation and Evaluation of Antioxidative Peptide Fraction of Mustelus griseus Muscle Protein
Effect of Mg on Microstructure and Mechanical Properties of Copper-Coated Short Carbon Fiber Reinforced Al Alloy Matrix Composite
Earth Architecture: The Famous Buildings Based on Iranian Architecture in Iran
Kinetics of Passive Film on Low Carbon Steel in Sodium Nitrate Solution by Numerical Analysis Method
Preparation and Characterization of Fibrous Hydroxyapatite/Chitosan Nanocomposites with High Hydroxyapatite Dosage
Towards Fabrication of Low-Cost Carbon/Ceramics Membranes: Substrate Modification
Research on Existences and Concept System of Reversal Symmetry in Mechanical Systems
Continuous Element Determination of Barium-Calcium Based on Single Sample of Ferroalloy Series
Comparison between Finite Element Commercial Codes to Simulate High-Temperature AA5083 Bulge Forming
Gypsum Dehydration to Alpha-Gypsum in Mixed Chloride Solutions
The Important Role of Chogha Zanbil in Earth Architecture Based on Material, Structural and Architectural Aspects
Modern Rammed Earth in Earth Architecture
Modern Architecture in the 21st Century
Chapter 3: Materials and Information Technology
Study on Crack Tip Field of Shape Memory Alloy Board under Bending Load
Dynamic Extension Problems Concerning Symmetrical Mode III Crack
Experiment Research on Deformation Properties under Unloading of Soft Clay
Morphology of SiC Whisker in Whisker Reinforced Reaction Bonded SiC Composite
Software Modeling of Power Quality Monitoring System
XRD Evidence for Phase Structures of Niobium Alloyed Austempered Ductile Iron
Study of Water Stability of AC and SMA Asphalt Mixture Based on Water Content
Experimental Investigation of Convective Heat Transfer in Circulating Water System
Design and Assessment of a Flexure-Based 2-DOF Micromanipulator for Automatic Cell Micro-Injection
Numerical Analysis of the GF/UHMWPEF Interply Hybrid NOL Ring Critical Volume Fraction
Study on Curing Kinetics of a Novel Epoxy Resin System for Hot-Melt Prepreg
Study on the Thermal Conductivity Model of Cement-Based Materials by a New Test Method
Research in Continuous Nearest Neighbor Queries
Sheet Metal Design with Modeling Kernels Technology
Isolation and Identification of a Chitin Degrading Bacterium Aeromonas SP D5-23 and Properties of Chitinase
Isolation and Identification of Strains with High Chitin Deacetylase Activity
The Binding Face Mechanics Analysis of Multi-Scale Modeling for Artificial Bone Implants
Wavelet Ridge Analysis of Lamb Wave
Research on ODC Based Software Defect Analysis Model
A New Algorithm for the System Identification of Shear Structures
Research on Simulation System for Power Transient Signal Analysis Based on Wavelet Theory
Observation of Wear in Induction-Heat-Treated Bearing Steel Bars under Reciprocating Motion
Study on Elliptical Cross-Section Rod of Shape Memory Alloy Subjected to Torsion Deformation
CFD Simulation of Pyrolysis of Lignite in a Downstream Fluidized Bed
Photoelectrocatalytic Properties of Porous TiO2 Films Prepared Using ODA as Template
Microstructual Evaluation of 13Cr-2Ni-2Mo Stainless Steel Quenched by Induction Heating
Application of Fuzzy Neural Network Controller for Cement Rotary Kiln Control System
Eggshell Membrane Biomaterials for Adsorption and Determination of Mn(II, VII) in Environmental Water
A Cluster-Analysis of the Employment Structure Deviation for the 11 Cities in Zhejiang Province
Tribological Effect of DLC Coating on the Contact Surfaces in a Novel Full-Metallic Pipe Joint
Research Progress of Fiber Reinforced Cement Composites
Innovative Design of GFRP Bars for Concrete Structures
Observation of Wear in PEEK Race - PTFE Retainer Hybrid Polymer Bearings under Dry Contact
Adsorption and Photocatalytic Degradation of Active Brilliant Red X-3B on the Mixture of TiO2 and HZSM-5
Stresses in Teeth and Overlying Crowns
Enhanced Electrochemical Hydrogen Storage Characteristics of the as-Spun Mg2Ni-Type Alloys by Substituting Ni with M (M=Cu, Co)
Changes in Three Dimensional Magnetic Fields of Carbon Tool Steel (JIS-SKS93) under Single Spherical Hertzian Contact
Characteristics Analysis of High Birefringence Photonic Crystal Fiber with Pentagonal Air-Core
Chapter 4: Materials Processing Technology
A Color Correlation and Texture-Based Shadow Elimination Method for Rainy Highway Videos
An Improved MMSE Pre-Coding Method for the Downlink Multi-User MIMO System
Numerical Simulation on the Combustion Characteristics of Armored Vehicle Diesel in Plateau Area
Microstructure and Formation Mechanism of Titanium Carbide Reinforced Ferrous Composite
Scheduling for the Flexible Job-Shop Problem Based on Genetic Algorithm (GA)
A Novel Method to Recognise Closely Connected CAPTCHA
An Approach to Assembly Sequence Planning Using Simulated Annealing
Apply Language Nature Rhythm to Large Scale Duplicated Text Detection
The Foundation of Campus Card System Platform Construction and Application Function Analysis
Calculation of Array Gain in the Reverberation Field
Color Quantization Based on Gaussian Mixture Mode
Cooperative Target Allocation for UCAV Team Air-to-Ground Attack Based on Decision Graph Bayesian Optimization Algorithm
Factorial Experiment Study on Deposition Parameter Dependence of the Energy Bandgap of a-SiGe: H Thin Film Prepared by Plasma Enhanced Chemical Vapor Deposition
Detection Reliability and Throughput Analysis for Cooperative Spectrum Sensing in Cognitive Radio Networks
Empirical Analysis of the Relationship between FDI and Processing Trade: 1985-2008
Fractal Mechanism Analysis and Simulation of Information System
Intelligent Surveillance and Image Transmission Based on Wireless Video Sensor Network
The Construction and Application of the Target Enterprise Selection Model in M&A
Ultrasonic Lamb Wave Measurement and Data Analysis System
Modeling and Predicting Total Electron Content by Semi-Parametric Autoregressive (AR) Model
Mobility Performance Analysis under Different SCell Measurement Periods in the LTE-A System with Carrier Aggregation
On Robust Stability for Stochastic Neural Networks of Neutral-Type with Uncertainties and Time-Varying Delays
Performances of Localization Algorithms in a Prototype WSN System
Preliminary Orbit Determination for GEO Objects Using Space-Based Optical Observations
Proof on the Maintenance of Gray Continuity in the Image of Broken Line Type Gray after Erosion
Effect of Sintering Temperature on Properties of NiFe2O4-Matrix Inert Anode for Aluminum Electrolysis by Adding Nanopowder
Study on Crack Tip Field of Mode I of Shape Memory Alloy in Plane Strain State
Research in Agricultural Technician Distribution Characteristics in Guangdong Province
The Analysis and Application of the C4.5 Algorithm in Decision Tree Technology
Research on Adaptive Advance System of Hydraulic Support Based on Neural Network PID
Robust Autopilot Design for Unmanned Underwater Vehicle Based on H Mixed Sensitivity
Some Thoughts on Strong Unforgeability in Ring Signature Schemes
Measurement of LED Spatial Intensity Distribution Using Imaging
Research on IOT Technology and IOT's Application in Urban Agriculture
Research on Rough Set Applied in the Geological Measure Data Prediction Model
Solution to a Class of Matrix Equations with k-Involutary Symmetrices
Slag Thickness in Continuous Casting Tundish Measuring Method Based on Temperature Information
Turnover Rate and Speculative Bubble: Empirical Study on A-H Share of Dual-Listed Companies
Macroporous ZnO Nanofilms and its Electrochemical Hydrogen Storage Ability
The Improvement of UMHexagonS Algorithm in AVS Video Coding
Range-Free Node Localization Schemes for Wireless Sensor Networks
The Design and Research of Telemedicine Consultation System Based in SIP
Automatic Image Mosaic Based on SIFT Using Bidirectional Matching
A Systolic Bit-Parallel Multiplier with Flexible Latency and Complexity over GF(2m) Using Polynomial Basis
A Study of BPEL-Based Framework for Optimal Composition of Dynamic WEB Services
Chapter 5: Mechanical and Computer Control
Uniqueness for Very Weak Solution to a Class of Elliptic Equations
The Improve of HFPS Algorithm in AVS Video Coding
The Visual Simulation of Air-to-Surface Missile Bearing-Only Attack
A New Improved Perturbation and Observation MPPT Control Algorithm in Photovoltaic System
Changes in the Magnetic Fields of Star-Shaped JIS-SKS93 Plates Embedded in Clear Acrylic Cold Mounting Resin under Tensile Stress
A CPN Based Method for Aspect-Oriented Modeling and Analysis of Fault Tolerance
Effect of Thickness of Interlayer on Microstructures of PM TC4 and GCr15 Joints Prepared by HIP Diffusion Bonding
A Topology Optimization Method of Application-Specific Network-on-Chip
Key Technologies Study for Automobile Fault Diagnosis Expert System
An EDM Multi-Agent Collaborative Manufacturing System Based on Petri Net
Performance of VoIP Networks Using MPLS Traffic Engineering
Spectrum Assignment Algorithm Based on Clonal Selection in Cognitive Radio Networks
Doppler Diversity Transmitter for OFDM Wireless Mobile Communications Based on Fixed Track
CFD Simulation of Gas Fluid Flow in a Rotating Zigzag Bed
Integrated Control of Suspension and Steering Systems Based on Vehicle Handling and Performance
A Variable Step Size Blind Equalization Algorithm Based on Gamma Distribution
Requirements Analysis for Co-Evolution of Business and Information Technology
The Design of Decision Supporting System in Oil Production Project of Oilfield
An Immune Intrusion Detection Model Based on One-Class Classification Technology
Performance Analysis of Multicarrier Code Division Multiple Access over Rayleigh Fading Channel
Controlling Fracture Height in Fracturing Effect Prediction of Oil Well Based on Uncertain Multi-Attribute Decision Making
Study on Shape Memory Alloy Plate with Circular Hole under Biaxial Uneven Tension
Research on Fuzzy Control System for Air-Condition in Bus
Image Zooming Based on Cartoon and Texture Decomposition
Fatigue Life Study of Hatch Corner on Large Bulk Carrier
A Successive Iterative Optimal Pre-Coding Algorithm for Downlink Multi-User MIMO System
Dielectric Relaxation Studies of the Fast Lithium-Ion Conductor La2/3-xLi3xTiO3 (x=0.06, 0.11)
Effect of Repeated Quenching on the Rotating Bending Strength of SAE52100 Bearing Steel
Chapter 6: System Analysis and Industrial Engineering
Preparation of N-Ce Co-Doped TiO2 Nanopaticles and their Photocatalytic Performance under Visible Light
Prediction-Based Independent Task Scheduling for Heterogeneous Distributed Computing Systems
Algorithm of Fundamental Equivalent Susceptance of TCR Type SVC
AHP in the Evaluation of Power Enterprise Assets
PSTree-Based Multi-Resolution Model for Buildings Simplification
Numerical Simulation of Fluid-Structure Interaction for Tension Membrane Structures
Analysis on Organization Networking Logistics Enterprises and Service Value Creation
A New Approach to Fault Diagnosis for Satellite Control Systems Based on Machine Learning
An Improved Block 2DPCA Face Recognition Algorithm with L1-Norm
An Adaptive Clustering and Inter-Cluster Negotiation Protocol for Multi-Target Tracking Based on WSN
Non-Autonomous Wheeled Mobile Robot Trajectory Tracking Control Based on the Navigation via WSN
Research on the Bearing Capacity of Unsupported Random Launching Site
Improve the Dyeing Property of Cotton Fabric via Corona Discharge
The Design of Decoupling Control System for Air-Cushioned Head Box of Paper Machine Based on Siemens S7-PLC300
Interference Suppression for Satellite Navigation Based on Neural Network and Wavelet Packets Transform
The Research on Structural Path between Relationship Benefits and Relationship Outcomes in Customer Loyalty Programs: Using Data Mining
Digitally Assisted Backend Correction Pipeline ADC Verilog-A Modeling
Study on Task Allocation Model of Forest Fire Fighting
Axial Vibration Analysis of Buried Pipeline under Earthquake Interaction
A Multi-Objective Optimization Genetic Algorithm for SOPC Hardware-Software Partitioning
Industrial Monitoring Wireless Sensor Network Routing Algorithm and Simulation
Tensile Strength Properties of Niobium Alloyed Austempered Ductile Iron on Different Austempering Time
Fatigue Damage Character of Metal Rubber Material
Printed-Electronic PCB Circuit Inkjet Printing Control and Detection System
Electro-Assisted Photocatalytic Degradation of Methyl Orange on TiO2 Film Using NaCl as Electrolyte
Construction Strategy of Marxist Literature Information Guarantee System
A Low Power PFD and Dual Mode CP with Small Current Mismatch for PLL Application
Research of Personnel Orientation System of Mine Based on ZigBee Technology
Chapter 7: Intelligent Mechatronics
Microstructure and Mechanical Properties of TiB2-WC-TiC-Ni Composite Tool Materials
A Modified DV-Hop Scheme for 3D Node Localization in Wireless Sensor Networks
Alteration from ETM+ Data Rating Based on Fractal Technologies
The Application of ACS800 Inverter in Load Distribution of Paper Machine
POMM: Precise Overpass Map-Matching Model and Algorithm
Investigation into Influence of Pre-Forming Depth on Multi-Stage Hydrodynamic Deep Drawing of Thin-Wall Cups with Stepped Geometries
Integer-Coded Genetic Algorithm for Trimmed Estimator of Multivariate Linear Errors in Variables Model
Discernibility Matrix-Based Attribute Reduction Algorithm of Decision Table
Anti-Detection Simulation Study in Thruster Motor System of Underwater Robot Based on Anti-Control of Chaos
The Security and Application of the RFID-Based Vehicle Security Monitoring and Administration System of the Internet of Things
Optical Properties of Near-Infrared Cyanine Dye Molecules Adsorbed on Silver Nanoparticles
An Algorithm of early Smoke Detection Based on Multiple Features
Supervised Manifold Learning for NIR Modeling of Cigarette Brand Identification
Research on the Lander Stability during Lunar Rover Unloading Base on the Theory of ZMP
Filtering Method for Pose Angles Based on CS-STF-IMM
On Process of Local Higher Education Information in China
SBA-15(P)-Supported Tetraethylenepentamine for CO2 Capture
Online Fault Prediction for EPB Shield Tunneling Based on Neural Network
Performance of CIE LAB-Based Color Difference Formulae under Different Viewing Conditions
Vibration Control of a Flexible Beam Using Model Predictive Control
Multi-Channel ECG Signals Compression Algorithm Using Simultaneous Orthogonal Matching Pursuit
A Research into the Military Emergency Logistics Information Construction
An Identifier-to-Locator Mapping Buffer Management Algorithm Based on Aimed Pushing and Pre-Fetching Method
Design and Implementation of Support Production Logging Comprehensive Interpretation System Platform
Inner System Design of a Nonlinear Plane Based on Extended Linearization Model
Kinematics Modeling and Driving Spring Design of Truss Structure for Deployable Truss Antenna
Optimization for Mining Material Loading Based on Genetic Algorithm
Research on Spatio-Temporal Epistemic Relevant Logic in the Domain of Air Traffic Control
Study and Design of the Networking and Intelligent Safety Bed Aiming at Quakeproof and Anti-Violence
Numerical Simulation of Salt Leaching for the Saline-Alkali Soil with Clay Interlayer I: Models Establishment and Validation
Analysis of Motion in Longitudinal Plane of Negative Buoyancy Vehicle
Development of a Low Cost Device for Measuring Solar Irradiance
Research on Concept System of Scaling-Ro-Translation Symmetry in Mechanical Product Structure
The Design Method of Optimum Field-Plate Structure for HEMTs
A Strong Forward-Secure Proxy Blind Signature Scheme
A Modified Haze Removal Algorithm Using Dark Channel Prior
Chapter 8: Signal Processing
Spectral Prediction Model for Halftone Prints by Enhanced Clapper-Yule Model
Spectrum Trade Model Based on Voronoi Diagram
Acquisition Algorithm for GPS L2C Signal on Dual-Frequency Navigation Receiver
Research Progress of Structural Seismic Design Thought
Seawater Temperature Measurement System Based on Virtual Instrument
Information Filtering Based on Immune Mechanism
Design Principle and Error Analysis of a New Large-Range Ultrasonic Position and Orientation System Based on TDOA
The Application of Visualization Technology in Advancement Degree of Difficulty Computing Process
Modelling GM(1,1) under the Criterion of the Minimization of Mean Absolute Percentage Error
Response of Disturbance of Systemic Fields Based on the Electronic Commercial Market
Mixture and Mixture-Process Variable Experiments for Paint Preparation Applications
A Differential Capacitive Accelerometer with Four Folded Springs and Changeable Area
Research in the Design of the Fuzzy Controller Intelligence of the Measuring and Controlling Apparatus on Water-Content in Material Pulp
The System Design of Automatic Rail Gas Press Welding
A Mathematical Method for Computing the Contour Closure
Speech Enhancement Method under Low SNR
Multi-Objective Decision and Optimization of Process Routing Based on Genetic Algorithm (GA)
Secret Error-Correcting Network Coding against Eavesdropping and Pollution Attacks
The Amalgamated Particle Filter Algorithm Based on the Bayes Theory and Used to Control Navigation's System Interferers
Correlation between Estimation Error and Possible Region in Localization Algorithms
Decision Support System of Production Scheduling Based on WEBGIS
Development of a Virtual Proving Ground for Commercial Vehicle
Analysis and Improvement of LEACH Routing Algorithm
The Comparison of Efficiency between the Recommendation Algorithm Based on Multi-Attribute Rating Matrix and the Algorithm Based on UIARM
Application Research of MEMS ADXL345
Feasibility Research on Traditional-Shape Stratospheric Airship
Three Dimensional Monte Carlo Simulation of Microstructure Evolution in Presence of Pores for Three-Phase Nano-Composite Ceramic Tool Materials
Glass Wool Prepared under Various Rotating Speed by Centrifugal-Spinneret-Blow Process
Transplant of Qt/E Application Based on QQ2440V3 Platform
Weighted Combination Method of Conflict Evidence Based on Deviation
A Self-Learning Method for Cognitive Engine Based on CBR and Simulated Annealing
Design of Remote Monitoring and Control System for Mine Water Storehouse Based on PLC
「Nielsen BookData」 より
