Mechatronics and applied mechanics : selected, peer reviewed papers from the 2011 International Conference on Mechatronics and Applied Mechanics (ICMAM2011) December 27-28, 2011, Hong Kong
著者
書誌事項
Mechatronics and applied mechanics : selected, peer reviewed papers from the 2011 International Conference on Mechatronics and Applied Mechanics (ICMAM2011) December 27-28, 2011, Hong Kong
（Applied mechanics and materials, v. 157-158）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
International conference proceedings
Includes bibliographical references and indexes
内容説明・目次
内容説明
This collection of selected papers from the 2011 International Conference on Mechatronics and Applied Mechanics, ICMAM2011, held in Hong Kong discloses the latest developments in the field of Manufacturing Technology and Processing, Mechatronics and Automation, Mechatronics and Embedded System Applications and other related fields.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
It covers, in particular, the topics of Mechatronics and Automation, Mechanical Manufacturing Systems, Signal Processing, Manufacturing Technology and Processing plus Materials Science and Technology.
目次
Preface and Committees
Chapter 1: Manufacturing Technology and Processing
Free Vibration of Functionally Graded Material Beams in a Uniform Electric Field
Ultrasonic TOFD Method for near Surface Defect Detection Using Longitudinal Secondary Wave
Simultaneous Process Mean and Variance Monitoring Using Wavelet Transform and Probabilistic Neural Network
Development of Centrifuge for Multi-Parameter Combined Environmental Test
Development and Application of Activating Fluxes in TIG Welding
Structural Analysis and Optimization Design of the Frame of YC460LC-8 Excavator
Magnetorheological Materials Theory United in Energy
Experimental Investigation of Mechanical Characteristics of Parallel Polygonal Line Groove Multilayer Winding Drum
Motion Analysis & Simulation of Cloth Rolling Machine
Three-Dimensional Discrete Element Simulations of Round Hopper in Thermal Power Plant
Structural Optimization Design of Parallel Piezoelectric Six-Component Force Sensor
Study of Partial Discharge Ultrasonic Wave Propagation in Generator Stator
Analysis on the Stability of Supercavitation Projectile
Optimized Processing in IMU-Aided GPS Signal Tracking
Deformation Prediction of Deep Excavation Using Support Vector Machine
Bionic Semi-Cylindrical Metal Surface and Soil Direct Shear Test
Reliability-Based Robust Design of Variable Cross-Section Wedge Beam
Prediction on Transverse Thickness of Hot Rolling Aluminum Strip Based on BP Neural Network
Research of Creating Method for Laser Inner Carving 3D Model Surface Texture Point Cloud
Optimum Setting of DC Drives PID Controller via Particle Swarm Optimization
Simulation on Supporting Characteristics of Heavy Hydrostatic Thrust Bearing
Design of Cement Mixer Body Based on the Pro/E
Optimization Analysis of the Tridimensional Container Terminal Transmission System
Electromagnetic Design of a Novel DC Lorentz Motor for Micromanipulation
OPC UA Discovery: A Study of Challenges and Perspective
Study on the Friction Properties of Surface Iodide Modified Nitrile Rubber
The Method and Technique of 2D Drawing Creation Based on NX7.5
Surface Roughness Prediction Model of Cylinder Grinding
Design of Temperature Testing System in Multi-Parameter Combined Environmental Test
Research on the 3D Modeling of Aviation Gas Turbine Blades Base on Free Surface
Airborne Single Observer Passive Tracking Algorithm Based on Improved CS Model
Concrete Damage Constitutive Relation Based on Characteristic Parameters of Acoustic Emission
The Simulation of Solder Bridging on TuMR Magnetic Head Connector
Design of Electric Vehicle Energy Regenerative Braking System Based on Super Capacitor
The Analysis for the Storage of Difficult Bulk Materials with Central Cone Silo
Study on the Mechanical Properties of Cement Modified by Nanoparticles
Design and Implementation of Trajectory Tracking for 3-Axis Servo Table Using UMAC Based on Optimal Preview Controller
Key Technologies of Digital Pre-Assembly in Networked Collaborative Design and Manufacturing
Strengthening of Ceramic Coated Steel by Laser Quenching
Effect of Cold Working and Annealing Condition on Scale Formation of AISI 4140 Steel
Research on Measurement of Pulsed-GTAW Process by Multiple Sensors
A Resource Allocation Model of Logistics Services Supply Chain for Multi-Agent Based on Ant Colony Algorithm
Study on Numerical Simulation Method for Motion of Supercavitation Vehicles
A Study on Fatigue Test for Cardiovascular Stent
Prediction of Residual Life Assesment Using Thermography and Crack Growth Analysis
The Comparative Analysis of the Characteristics Drafting with ET and Richforever Clothing CAD Softwares
Comparative Simulation Research between Rigid Body and Flexible Body for Double-Gear Parallel Driving Systems
Modeling and Modal Analysis of Tool Holder-Spindle Assembly on CNC Milling Machine Using FEA
Customized Titanium Plate Virtual Design and Deformation Simulation Analysis of Human Lateral Mandible Defect
Simulation Research for Strip Shearing Section Level Distribution
Free-Form Two-Dimensional Contour Error Estimation Based on NURBS Interpolation
Research on PMnN-PZT Ferroelectric Thin Films on Silicon Substrates
A New Dynamic Test Method of Fiber Optic Gyroscope
Design & Research of a Continuous Jack-Up System for Large Structure Object
Research on Home Appliance Lifecycle Information Management System Based on RFID
Multidisciplinary Collaborative Satisfaction Negotiation Based on the Physical Programming Method in Product Design
The Effect of Vetrical Milling on Finished Surface of Polymethyl-Methacrylate Sheet
Data Transmission Mode of a Small-Scale, Real-Time Industry Control Network
Optimal Deployment Model for near Space Bistatic Radar Network
A New Optimized Method of Excitation Signal for Closed-Loop Identification of Power System Based on Ambient Signals
The Experimental Study on Friction and Wear Characteristics of 25Cr12Ni5Mo Hot Work Die Steels at High Temperature
The Spindle Static Characteristic Analysis of HTC3250n NC Machine Tool
Design and Implementation of Container Terminal 3D Simulation Model Repository
Design of a Pile Press Machine for Automobile Gearbox Tapered Roller Bearing
Rapid Assessment of Surface Color of Chinese Fir and Eucalyptus Wood by near Infrared Spectroscopy
The Design and Analysis of Universal Inertial Switch Based MEMS
Chapter 2: Mechatronics and Automation
Wisdom Health Care Environment Systems for Monitoring and Automated Control via RBF Function
The Field Scale Investigation of Water Coning Phenomenon
The Research of Intelligent Vehicles Mean Shift Based on Difference Algorithm
Effect of Two-Stage Double Peak Aging on Microstructure and Properties in 7050 Aluminum Alloy
Evaluation of 3D-Traffic Accessibility Based on Space Syntax: A Case Study of Xi'an Subways
The Effects of Top Management Support on Information System Success: Manufacturing Industry Cases
The Research of Forklift Control System Based on Ultracapacitor
Instrument Management System for Equipment Remote Control via RFID
The Workshop Information Management for Underwater Production Facilities
Structural Design for Dynamic Roller Device in Transporting Unit of Biomass Pyrolytic System
NC Post-Processor for 5-Axis Milling Machine of Non-Orthogonal Type
Research on Spiral Drill Stabilizer Wear-Resisting Layer Repair Technology
The Improvement of Maximum Power Point Tracker Algorithm in Photovoltaic Power System
Analysis of the Interaction between Modes by Normal Forms and Singular Perturbation Theory
Control of Multivariable Coupling System Based on Improved PID Neural Networks
Design and Implementation of Shortest Travel Path Searching Based on Improved Dijkstra Algorithm
Key Factors Affecting the Amplitude of a Composite Ultrasonic Wiredrawing Vibration System
Influence of Machining Parameters and Pre-Stress on Residual Stress of Pre-Stress Hard Turning in 40Cr Steel
A Cooperative Search Strategy for Moving Targets Using UAV Swarms
Modern Furniture Color Image Based on Eye Tracking
Data Association Method for Radar Network Based on Time Restraint
Analytical Solution of 1-D Viscoelastic Consolidation of Soft Soils with Fractional Maxwell Model
Research of Localization Issues in Underwater Sensor Networks
Research on Dynamic K-Means Clustering Algorithm in Cyanobacteria Blooms Detection
Fuzzy PI Control Strategy of the Air Bleeder Valve on SIMULINK
Dynamic Model of the 6-DOF Parallel Manipulator Control Using Lagrangian Equation
On the Practical Consideration of Source Localization Using the Location Template Matching (LTM) with Multiple Sensors
Analysis and Design of Electric Energy Consumption Inspection Equipment Based on ARM9
Product Information Representation Method for Product Conceptual Design Based on Improved Meta-Model
The Liquid Level Control Based on New Two-Degree-of-Freedom IMC-PID
Smith Predictor Based Fuzzy Estimator for Uncertain Time-Delayed Systems
Control System Design of Automatic Feeding Machine
Study of Ambiguities of English-Chinese Machine Translation
Comparison of Adomian Decomposition Method and Differential Transformation Method for Vibration Problems of Euler-Bernoulli Beam
Mine Coal and Gas Outburst Prediction Area
Road Background Generation and Update Method Based on Segment Statistics
A New Algorithm on Mice Action Analysis
The Study of Fast Pattern Making Methods Based on ET2007 CAD System
Maximizing the Lifetime of Sliding Wireless Sensors in Barrier Coverage
Research on Modeling and Simulation of Active Disturbance Rejection Controller for Gas Turbine
Influence of Span-Thickness Ratio on Arching Action of Reinforced Concrete Frame Beams
Rough Properties of Rough Graph
A Semi-Anonymous Non-Contact Offline Mobile Payment Protocol Based on Concurrent Signature
The PLC System Design of the Floating Cleaning Machine
A Time-Frequency Filtering Method Based on Generalized S Transform and its Application in Machinery Fault Diagnosis
'Theory and Practice Together' in American Engineering Education
Study of a Method for Improving the Anti-Lock Brake System of Electric Vehicle
Visual Calculation and Analysis System of Automotive Active Safety
Simulation Analysis of Seed Metering Procedure in Scoop Metering Device Based on Discrete Element Method
Method of Spray Gun Path Generation Based on Z-Map Theory
Centrifuge Rubber Suspension Spring Characteristics of the Experimental Research
Mining Evolutionary Link Strength for Information Diffusion Modeling in Online Social Networks
The Centroid Wireless Localization Algorithm of Area in Underground Mine Based on TWA
Development & Design of Large-Tonnage and Great-Height Hydraulic Continuous and Synchronous Jack-Up System
Dial Instrument Calibration by both Automatic and Half-Automatic Methods
Research on the Complete Dynamic Model of Tilting-Pad Journal Bearings Including Fluid Film Temperature Effect
Analysis and Improvement to Coordination Control Circuit of 2x350MW Supercritical Units
Compressive Behavior of Aluminium Foams Prepared by Powder Metallurgy Method
Application of Genetic Algorithm for Nozzle Parameters Optimization of Waterjet Propulsion System
Research on Pressure Characteristics of Vehicle Air Braking System with Leakage from Pipeline
Research on Influence of Parameters Variation on the Fixed Orifice Performance of the Servo-Valve
Load Following Controller for Single Free-Piston Generator
Study on Non-Linear Viscous Elastic-Plastic Creep Model of Mica-Quartzose Schist
Determined Key Distribution Protocol Using Non-Orthogonal Quantum States
The Seismic Performance Analysis of the Overpass by the Traveling-Wave Effect
Study on Surface Roughness in High-Speed Milling for ALMn1Cu
Testing Analog Circuits by PCA of Power Supply Current
Research on Volume Measurement Technology for Rail Tanker Based on Computer Vision
Modelling Significant Wave Height Data of North Sea: Rayleigh vs Weibull Distribution
The Relationship between Minimum Zone Sphere and Minimum Circumscribed Sphere and Maximum Inscribed Sphere
Investigation on Simulation of Train Loading on Prestressed Concrete Sleepers
Chapter 3: Mechatronic and Embedded System Applications
The Exploration of the Minimum Cross-Sectional Area which is the Important Parameters of Nodular Iron Casting Foundry Process Design
A Design of Software Quality Model for Embedded System
Study on the Principle of Reasonable Modeling Based on NX
Computer Fitting of Shielding Effectiveness for Electromagnetic Shielding Clothing
The Structural Design of Multi-Function Hydraulic Clamp
Modal Analysis of Three Rotating Blades of Large Wind Turbine
The Analysis of Stiffness Condition in Rolling Thin-Walled Ring
Construction of Social Responsibility Comprehensive Evaluation System for the Large State-Owned Enterprises
Development and Validation of a Thermodynamic Model for Predicting Traffic-Related Pollutants Dispersion in Urban Street Canyons under Low Wind Speed Conditions
The Geometric and Material Nonlinear Analysis of the Bioprosthetic Heart Valve
Research on Aluminum Plate Reversible Hot-Rolling Mathematical Model and Schedule
A Program Designed for the High-Speed Gearbox Test-Bed Based on LabVIEW
Model Parameter Identification of Tire Dynamic Balance Detection System
Optimum Design of the Jaw Clamping Mechanism of Forging Manipulators Based on Force Transmissibility
The Open Colliery Slope Mechanics Stability Analysis and Forecasting Methods Reasearching
Adaptive Resource Management for Cyber-Physical Systems
Generalized Synchronization of Chaos in RCL-Shunted Josephson Junction with Uncertain Parameters
Robust Optimal Sliding Mode Control for Attitude Synchronization of Autonomous Docking to a Tumbling Target
Research on Displacement Compensation Algorithm of Tactile Sensor on the Beating Heart
Design the Economical Engraving Machine for Wood
Analysis and Simulation of Fibre-Channel Tandem Network in Avionics System
Comments on Composition of Solid Waste in University Kebangsaan Malaysia (UKM)
Research on the Determination of Total Hardness in Drinking Water by Microscale Chemistry Experiment
Indoor Ultrasonic 3D Seamless Location and Wireless Communication of Metal Can
Effects of Bending Cyclic Load on Mechanical Properties of 2D Carbon Cloth Laminated C/C Composites
Study on Over-Complete Dictionaries for Sparse Representations of Signals
Impact Analysis on Slip Strength Based on Fuzzy Analysis Hierarchy Process
Influence of Load Rate on Arching Action of Reinforced Concrete Frame Beams
Static and Transient Stress Analysis of an Elastic Oil Sump
Discontinuous Yield and Large Deformation Analysis on Rotating Disk Based on J2 Deformation Theory
Research of MEDM Pulse Power Based on the Non-Resonant Natural Oscillation
The Disquisition of the Three-Dimensional Optimize Validate System of Oil-Immersed Pump Lectotype
Study on Formation Precision for Metal Wire Bended
Flexible Distributed Workflow Management Systems Design Based on CORBA
Comparison of Rough Graph and its S-Rough Graph
Attitude Maneuver Control of Flexible Spacecraft with Finite-Time Convergence
Simulation Study on Tapered and Spherical Shaped Charge under Underwater Explosion
Performance Assessment of Jumbo Cylinder Pipe Produced by Rotary Expanding Technology TPCO
The Fault Recognition of Motor Based on the Fusion of Neural Network and D-S Evidence Theory
Numerical Analysis of Grouting and Blocking of Deep Large Section Shaft at Working Face
Automation of Authentication and Key Distribution Schemes Design Based on Trace Formulae
Representation Form of Rough Graph
The Research of the Asynchronous Motor Vector Control Arithmetic
The Design of the Emergency Retrieval System Based on User Preference
Weak Signal Detection Based on the Nonlinear Dynamic Model
Chapter 4: Applied Mechanics and Other Topics
An Online Monitoring, Diagnosis and Control System for Heavy Duty NC Machine Tool
Steady Heat Transfer Analysis of Leaf Spring Rotary Engine
Analysis of the Ferroresonance of 110 kV Power Systems
Researching on Valve System of Hydraulic Electromagnetic Energy-Regenerative Shock Absorber
Finding Values for Multi-Valued Features
Friction and Wear Analysis of Grease-Lubricated Ball Bearing Based on EHL Numerical Calculation
Research on Redress System of Vibration Table in Multi-Parameter Combined Environment Test System
Vibration Analysis and Control for Reciprocating Compressor Piping System
Suture Density Study of the Bioprosthetic Heart Valve
The Design of Intelligence Pipeline Leakage Detector
Ecological Restoration by a Multistage Floating-Bed System in a Eutrophic Urban River, China
Design of the Variable FU Array for Forward/Backward Transform in H.264
Dynamics Simulation of Banana-Type Line Vibrating Screen and Analysis of Applied Force of Fastenings
Wear and Tribotermal Effects of Nanostructured Nickel Chemical Coatings
The Influence of Grain Size and Grain Size Distribution on Sliding Frictional Contact in Laterally Graded Materials
Study on Aerodynamic Properties of Impact Plate
Longitudinal Cracking Analysis of PCCP with Broken Wires
The Dynamics Analysis on a Type Palletizing Robot
Propagation Characteristic of Ultrasonic Lamb Wave
Generators Effect on Voltage Stability Enhancement by Normal Forms of Diffeomorphism
Dynamic Balancing Modal Analysis and Vibration Suppressing Design for Reciprocating Compressor Crankshaft
Squeal Analysis of a Disc Brake Considering Damping between a Disc and a Pad Lining
Study on Worst Case Coverage of Mobile Sensors in Hybrid Wireless Sensor Networks
Human Face Fast-3D-Reconstruction from a Single Image
Level Set Segmentation Method in Medical Image Segmentation Research and Application
Steady-State Voltage Stability Enhancement by Using Nonlinear Participation Factor
Research on Genetic Characteristics of Slab Bulge in Continuous Casting Process
Vehicle Dynamic Analysis and Fatigue Prediction
Asymmetric Change in Three Dimensional Magnetic Fields of Bearing Steel (JIS-SUJ2) under Spherical Hertzian Contact
Image Retrieval Based on Edge Detection and Histogram
Study on a Control Method for Trajectory Correction
The Research of Travelling Crane Non-Destructive Health Monitoring Based on Artificial Incentive and PVDF Sensor
Estimate Method of Web-Based Distance Education for the Deaf Undergraduate
Green Residential Community Domestic Sewage Treatment and Recycling Analysis
A Spectrum Allocation Algorithm Based on Graph Theory
EWOD-Based Digital Microfluidic Chip and its Application
Performance Calculation of a TBD234V12 Diesel Engine with STC
Sentiment Analysis of Comparative Sentences for Chinese Document
A Case Study of Earthquake Resistant Retrofit Design with Economical Braced Steel Frame System for a Primary School
A Determination Method of Storage Performance Attribute Parameter
Investigation of the Accuracy of the Numerical Manifold Method on n-Sided Regular Elements for Crack Problems
The Study of Carrier of Aerial Afforestation Design
Analysis of the Optimal Value for Transmission System of Reactive Load Compensation
The Hydraulic and Air Pressure System and PLC System for the Button Cell Spreader
Lagrangianlized Nonlinear Dynamic Equation of Timoshenko Beam and Application
Some Qualitative Properties of Modes of Continuous System of Two-Spans Beam with Two Free-Ends
Amplitude Incremental Generalized Potential Energy Principles with Two Kinds of Variables for Nonlinear Vibration
Computational Analysis of Low Velocity Impact Response of Composite Panels
A Compact Broadband Phase Shifting Network for a Four-Feed Multi-Mode Global Navigation Satellite System Antenna
Study of the Cellular Composite Beam's Behavior under HVAC Ducts' Weight while Exposed to High Temperature
Seismic Behavior of Precast Segmental Bridge Columns with Carbon Fibre Reinforcement as Energy Dissipation Bars
Improvement of Computational Translation by Using Entropy Theory
Research on High-Frequency Vibratory Stress Relief of Small Cr12MoV Quenched Specimens
Analysis of Fretting Crack Propagation Behavior with X-FEM Method
Development of 3D Elastic Deformable Object Model for Robot Manipulation Purposes
Experimental and Numerical Studies on the Reinforced Concrete Frames Subjected to Blast Loads
Influence of Wear and Backlash on Machined PEEK Polymer Bushes and 7075 Aluminium Alloy Cam Plates Used in Robot Joints
Investigation of Viscoelastic Deformation and Constitutive Modeling of PC, ABS and PC/ABS Alloys
Edge Tracing of T-Shirt by Robot for Spreading Purposes
Innovative Wavy Bolts and their Supporting Mechanism for Burst Prone Rock Masses
Structure Design and Stress Analysis of Hollow Sucker Rod Joints
Nonlinear Response and Fatigue Life Prediction of Thin-Walled Structures under Thermo-Acoustic Loadings
Research on Multilevel Inventory Control of FMCG Industry Based on System Dynamics
Dynamics Analysis of an SEIQS Model with a Nonlinear Incidence Rate
Research on the Energy Consumption Evaluation Model of Container Terminal Logistics System
Decision-Making Model on Real Estate Investment
Influence of the Tabor Parameter on the Roughness-Induced Adhesion Hysteresis
A Best Relay Based Cooperative Spectrum Sensing Scheme
Design of Oscillator for PWM Controller
Dynamic Simulation of Flow Behavior in a New Spray Granulation Tower
Scheme for Shortcut Double Keys of Working Mode Selection in PLC-Based Numerical Control Machine
Research on the KII C of the Two Types of Concrete Specimens
Detecting Malicious Fast Flux Domains
Analytical Solutions of Deformation for Temperature Dependent Functionally Graded Conical Shells
Chapter 5: Materials Machining
Applications of Association Rules in Computer Crime Forensics
Block Compressed Sensing Based on Image Complexity
Study on Vehicle Routing and Scheduling Problems in Underground Mine Based on Adaptively ACA
Study on Application of Wireless Sensor Networking in Environmental Monitoring
Helium-Injection Cooling of Hot Silica Glass Fiber in Optical Fiber Manufacturing System
Research on Stress Corrosion Behavior of In-Service Pipeline in H2S Environment
A Novel Registration Approach for Mammograms Based on SIFT and Graph Transformation
Duplex Hard Coatings with Aditional Ion Implantation
Automatic Dynamic Task Distribution between CPU and GPU for VR Systems
Relation between Cubic Stiffness and Initial Conditions of Maximum Energy Dissipation in a Nonlinear Vibration Absorber
A Robust Tracking Algorithm in Crowded Environment
The Research of WSN Time Synchronization Algorithm Based on Clustering Network
An Audio Watermark Algorithm in Wavelet Domain Based on SVM
The Prediction and Analysis of Water Resource Carrying Capacity in Chongqing Metropolitan, China
Distributed Attitude Consensus Control of Multiple Homogeneous Spacecrafts While Preserving Connectivity
Interaction of Semi-Cylindrical Gap and Multiple Shallow-Buried Cavities and Inclusions
The Exploration of Appropriate Pouring Time which is the Important Parameters in Gray Cast Iron Foundry Process Design
Mechanical Characteristics of PVA/STMP Hydrogel in Tensile and Unconfined Compression
Vehicle Parameter and Road Grade Estimation Based on Kalman Filter: Theory and Experiments
An Analytic Method and Application on Design Planar Six-Bar Mechanisms with an Approximately Equal Velocity Ratio Transmission
The Emissivity of the Casting Surface
A Mathematical Modeling and Optimization Approach for Trajectory Planning of Robot Manipulators
Research on Mechanical Property of Top Drive Casing Running Tool's Slips
Background Modeling Approach Based on Eigenspace Decomposition
Correlation of Hardness with Mechanical Properties of SPCC Steel Spot Weld
Chapter 6: Control System Modeling
Research and Implementation on Multi-Database System Based on XML
Design and Implementation of Remote Disaster Backup Solution to Oracle Lob
Long-Distance Slurry Pipeline Valve Monitoring System Design and Application
A Prototype Target Tracking Network System for Robot Feedback Control
Genetic Algorithm Design and Simulation for Job-Shop Scheduling Problem
Technique Influence on Cast-Iron Surface Textures Induced by LST
Data Fusion Algorithm for Asynchronous Radar Networks under Blanket Jamming
Design of the Heating Regulation Controller Based on ARM
The Visual Extraction of the Autonomous Lawnmower Navigation Route
Permanent Magnet Synchronous Motor Servo System Design and Algorithm Research
Numerical Simulation of Fatigue Crack Growth of New-Material Track Rollers
Research on the Application of Wireless Communicating Technology in the Rescue of Earthquake
Research for Control System of Four-Axis Automatic Winding Machine
Comparison and Evaluation of Lightweight Formats of 3D Models
Improved GA Based Multi-LAVs' Aerial Delivery Areas-Choosing Method
A Study of Virtual Remote Laboratory and its Subsystem by Using Modelica
Automobile Active Suspension System Optimization Design Based on Modified Multi-Objective Genetic Algorithm
Study on Tensile Strength of Composite Double-Lap Joint
Steady Data Acquiring and Robust Neutral Network Training for Boiler Combustion Optimization
An Improved Airborne Single Observer Passive Location
The Development of the GAT High Accuracy Magnetic Suspension Gyro Station and the Application on the Underground Engineering
Development of a Vertical Axis Pipe Flow Generator with Swing Gates
SRAP Pre-Stressed Reinforcing Techniques for Concrete Structures
Model and Simulation on Flow and Pressure Characteristics of Axial Piston Pump for Seawater Desalination
Long Term Voltage Stability Enhancement by Model Predictive Control
Chapter 7: Intelligent Mechatronics
Comprehensive Line Selection Method Based on the Relative Intensity of Transient Signal
Intelligent Sunshading Control System Based on Lonworks Fieldbus
BSC Application in the Performance Management of Service-Oriented Manufacturing Enterprises
Failure Analysis of Reinforced Concrete Columns after High Temperature
Serial Communication of PC and SCM in Distributed Control System
Using SVM to Predict Stock Price Changes from Online Financial News
A Service Component Model for Semiconductor Test Equipment
A Revised Clustering Algorithm Based RBF Neural Network Approach for Modeling of an Electro-Hydraulic Servo System
Computer-Aided Optimization of a 5.8 GHz ETC Receiver Front-End Design Using Memetic Algorithm
A Neural Network Model for Simulating Cloth Texture Deformation
The Wet Clutch Pressure Control of Dual Clutch Transmission Based on FCMAC
Jam Status Monitoring System in Manufacturing System Environment
Rapid Classification of Softwood and Hardwood by Near Infrared Spectroscopy of Wood Tangential Section
Investigation on Wear Behavior at High Temperature of Smooth and Bionic Non-Smooth Samples
Research on Earthquake Load Analysis of Large Structures in Non-Slide Construction
Optimal Structural Frequency Design of Stiffened Shell
Maximization of Productivity by Distributed Robot System for Manufacturing Operation
FEM Analysis of Large Load and Long Span Suspended Platform Based on APDL
Design of a New Suspension Mechanism of Temporarily Installed Suspended Access Equipment
Demerit-GWMA Control Chart with Fast Initial Response
Finite Element Analysis for the Body Frame of Open-Front Press
Study on X-Voronoi for Heterogeneous Wireless Sensor Networks
Numerical Simulation and Experimental Study on Bonding Tool Design of Thermosonic Transducer for Flip-Chip Bonding
Theoretical and Experimental Research on the Features of Cutting Force in Rotary Ultrasonic Face Milling of K9 Glass
Evaluation of DBPs Formation Potential during Chlorination of Dissolved Organic Matter Fractions Isolated from Eutrophic Water
Dynamic Characteristics of Belt Conveyor Based on Virtual Prototyping
A High Efficient Variable Cross-Section Compound Ultrasonic Wiredrawing Vibration System
「Nielsen BookData」 より