Advanced materials : selected, peer reviewed papers from the Second International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011), December 16-18, 2011, Guilin, China

著者

• International Conference on Advances in Materials and Manufacturing Processes
• Bu, Jinglong
• Jiang, Zhengyi
• Jiao, Sihai

書誌事項

Advanced materials : selected, peer reviewed papers from the Second International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011), December 16-18, 2011, Guilin, China

edited by Jinglong Bu, Zhengyi Jiang and Sihai Jiao

（Advanced materials research, v. 415-417）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

These volumes comprise papers, on the topic of "Advanced Materials", selected from the second International Conference on Advances in Materials and Manufacturing (ICAMMP 2011) held on the 16-18th December 2011 in Guilin, China. The 468 peer-reviewed papers are grouped into the chapters: 1: Composites, 2: Micro / Nano Materials, 3: Iron and Steel, 4: Ceramic, 5: Metal Alloy Materials, 6: Biomaterials, 7: Optical/Electronic/Magnetic Materials, 8: Building Materials, 9: New Energy Materials and Environmental Materials, 10: Biomaterials and Chemical Materials, 11: Thin Films, 12: New Functional Materials, 13: Materials and Design.

目次

Preface, Sponsors and Organizers Chapter 1: Composites Study on Reliability of New Fixture Method for NOMEX Honeycomb Study on Elevated-Temperature Performance of LiCo0.02Cr0.02Mn1.96O4 by Surface Modification Singular Problems of Spherically Uniform Anisotropic Piezoelectric Solids The Growth Mechanism of MgO in the ZnO Coated Mg2B2O5 Whisker Reinforced AZ31B Composite Study on the Absorption Properties of Spinel Type Ferrite Composite Coatings in the Low Frequency Study on Nano-Particle Modified Epoxy Resin Adhesive Elastic Dynamics Optimization Design of Novel High-Speed Spatial Parallel Robot Retard of D-Galactose-Induced Aging in Mice by Whey Hydrolysates Preparation and Thermoelectric Characteristics of SiO2/Mg2Si0.8Sn0.2 Bulk Nanocomposite Effect of Grinder Guiding Error on the Machining Precision of Large Scale Surface Workpiece Random Response Analysis for Nonlinear Systems of Composite Laminates The Viscous Coefficient Comparison between 2-D and 3-D Fluid Models in Molecular Dynamics Simulations Study on the Effect of Ways of Gear Relief on Contact Force of Teeth Face NbC and VC Nanoparticles Reinforced Fe-Si-Mn Matrix Composite In Situ Synthesized by Plasma Jet Al Ion Implantation of SiC Coated Carbon Fiber-Reinforced SiC Matrix Composites by Metal Vapor Vacuum Arc Ion Source The Strength Model of Small Parameter Scroll Wrap in a Scroll Compressor The Synergy Effects of Styrene-Maleic Anhydride Copolymer and Epoxy Resin on Interface Adhesion of ABS/Short Glass Fiber Composites Effects of Concentration of Alkaline Treated SF on the Tribological Properties of POM Composites Filled with LDPE and Sisal Fibers Comparative Study on the Mn2+ Removing Performance of Several Filters A Risk Management Framework for Users' Integratation in Product Innovation Nano-Sized Silica Reinforcement of Epoxidized Natural Rubber Prepared in Latex State Iterative Learning Control Based on Radial Basis Function Network for Exoskeleton Arm Influence of outside Environmental Variations on Adsorption Characteristics of Waste Dusty Slag /EPDM Composite Esterification and its Kinetics of Acetic Acid with 2-Methoxyethanol over a Ce-Pillared Layer Clay Catalyst Preparation and Analysis of Cotton Nonwoven Film Strengthened by Chitosan Preparation and Performance of -Sialon Bonded ZrO2 Composites Structural Design of Rail-Beam Leveler Effects of Amorphous and Nanocrystalline Inoculants on the Micro-Structure and Mechanical Behavior of Fe-Si-Mn Steels Prediction Control Method of Spot Welded Nugget Size Based on Finite Element Analysis of Thermo-Electricity Transient First-Principles Study of the Properties of Clean and Ni-Doped TiC/Fe Interfaces Microstructure and Wear Properties of In Situ TiC-Cr7C3/Fe Surface Composite Effect of Manganese Ions on Corrosion Inhibition of PANI for Mild Steel in 0.5 M H2SO4 Low Temperature Fabrication of Platinum/Carbon Black Powder Coating Accelerated Aging Test and Study of Storage Life Prediction of NBR O-Ring Crude Oil Adsorption on Fe2O3/EPDM Composite to the outside Environmental Variations Metal Ions Doped Complex Cobalt Blue Pigment Research Hysteresis Heat Build-up and Low Temperature Processing of Polymer under the Vibration Force Field TiCl4 Treatment to the Substrate of Dye-Sensitized Solar Cell for the Applications on BIPV Microstructure Analysis of in-Plane Quasi-Isotropic Composites Reinforced by Multi-Direction and Multi-Layer Three Dimensional Fabric Study on Optimal Design of Light-Weight Composite Hood Influence of Laser Power on the Microstructure and Anti-Corrosion Performance of LHPS NiCrAlY Coatings Synthesis of Alumina-Tungsten Carbide Composites by Self-Propagating High Temperature Synthesis Process Study on a Anti-Optimization Method to Identify the Parameters of the Frequency Correlation Viscoelastic Model for Rubber Particle Size, Structure and Powdering Process of Calcium Carbonate Nanoparticles Filled Powdered Styrene-Butadiene Rubber Fabrication Mechanism of in-Situ Synthesized Al3Ti-Mg Composites by Vacuum Hot-Pressing A Empirical Study of Industrial Design Contribution to Advances in Timber Materials Science Test Study on Overdose Cement Stabilized Crushed Rock Base Epoxy Cured with Anhydride Terminated Polydimethylsiloxane: Cure Kinetics and Thermal Properties Preparation and Application of Self-Compacting Concrete-Filled Steel Tube Using Polymer Admixtures Study on Speciation of Cr in Cement Study on Hot Dip and Coating Structure of 55% Al-Zn Alloy Coated Steel Study on Resilience of Mattress Foam and Body Pressure Distribution Characteristic of Mattress Interaction Mechanism between In Situ Nb2C-V2C Nanoparticles and S/L Interface during the Rapid Solidification of Fe-Nb-V Alloy Effects of Melting Process on the Microstructure and Thermal Conductivity of Cu-10Ni-5Mo Alloy Friction and Wear Behavior of POM Composites Filled with LDPE and Wood Fibers The Influence of Functionalized TiO2 with Poly(methyl methacrylate) on the Mechanical Properties of TiO2/Epoxy Nanocomposites Transmission Line Characteristics Based on Metamaterials Substrate Preparation of AlN-ZrO2(Ca) Composites by Pressureless Sintering Investigation of Carbon Fibre Reinforced Composites Based on Novel Phenylethynyl-Terminated Polyimde Study on Growth and Crack of Yb:YAG Laser Crystal Development of Slab Caster Break-Out Alarm ANN System Morphology and Crystallization Behavior of Toughened Poly(trimethylene terephthalate) Blends with Maleated Styrene-Butylene-Co-Ethylene-Styrene Copolymers Study on the Densification Process of the High Density Graphite Materials Investigation of Microstructure and Mechanical Property of the Machinable B4C/BN Composites Fabricated by Hot-Pressing Process The Shell of Internal Combustion Tamping Pickax Injection Molding CAE Technology Research Influence of Matrix Aggregates Particle Size Grades on Properties of Grouting Material for Blast Furnace Development Research of Failure Theories for Thick Composite Laminates The Experimental Study of TiO2 Nano Compound Coating Applied in Air Conditioner Synthesis and Properties of Epoxy Resin/Graphite Composites via In Situ Polymerization Synthesis and Stabilization of BaTiO3/CoFe2O4 Ferrocolloids Adhesion of TiC/Fe Cermet Interface with C Vacancy: A First-Principles Study One Simple Finite Element Methodology to Determine the Moduli of Hexagonal Honeycomb Surface Modification of Carbon Fiber via Atom Transfer Radical Polymerization (ATRP) Mechanical Design and Virtual Teaching of a Two-Leg Walking Mechanism Preparation and Characterization of SrO-Al2O3-Fe2O3-B2O3 System Nano-Ferrimagnetic Glass-Ceramics A New Modifier Prepared and it's Applied in High-Density Polyethylene/Anhydrite Composites Strain Characteristic of Filament Wound Composite Cylinder under Axial Loading Flame Retardation of PP/EPDM Composites Containing Ammonium Polyphosphate and its Microcapsules Precision Predicting and Computer Aided Adaptive Assembly Study of Diffusion-Homogenization on SiCp/Al Composites Prepared by Elemental Powder Role of Epoxidized Natural Rubber in Dynamic Mechanical Properties of NR/ENR/silica Composites Enhancement of Machinability of Inconel 718 in End Milling through Online Induction Heating of Workpiece Preparation and Performance of a Novel Intumescent Flame Retardant Research on the Inclusive Materials of the Rice Direct Sowing Technology with Seed Tape Rapid Prototyping for Treatment of Cranial Reconstruction Surgery Treatment of Printing and Dyeing Wastewater by the Iron Scurf and Flue Dust Internal Electrolysis Method Characterization of LiClO4-SiO2 Composite Electrolyte Prepared by Modified Sol-Gel Method Microstructure Evolution in Preparation of Cu-Sn Contact Wire for High-speed Railway Chapter 2: Micro/Nano Materials Modified Model for Static Behavior of Microcantilever Gas Sensor Adsorbed with Monolayer Molecules Study on Optimization Design of a Hoist Roller Low Temperature Preparation of ZnIn2S4 by Hydrothermal Method and its Visible Light Photocatalytic Property Crystal Structures of New Compounds Na0.5Sm4.5Ti4O15 and Na0.5Eu4.5Ti4O15 Study on Recovery of High Temperature Waste Gas from Rotary Hearth Furnace Research on Generalized Overall Shape Setting Control Models with Asymmetric Shape Control Function for UCM Mill Green Synthesis of Silk Sericin-Based Silver Nanoparticles Immobilization of Horseradish Peroxidase on TiO2 Nanotube Arrays via Seeded-Growth Synthesis Study on Pr-Substituted Bismuth-Iron Garnet Crystallite and its Magnetism Luminescence Properties of ZnS:Cu,Tm Semiconductor Nanocrystals Synthesize by a Hydrothermal Process An Effective IQ Assess Method before Information Action Carbothermal Reduction Synthesis of Superfined TiC Powders from TiOSO4 Interfacial Transition Zone Micro-Structure of Light-Burnt MgO Concrete Universal Serial Protocol Grammar Analysis Model The Geometrical Feature Recognition Method of Part Drawing Study on the Magnetic Induction Effect of Rare-Earth La Modified Amorphous Ribbons Study on the Filling Particle for Foam Ferrous Metalmaking Needed Electrical-Pumped Active Plasmonic with InP-Based Quantum Wells Study on Preparation and Mechanical Intensity of Nano-TiB2/ Tussah Silk Fibroin Composite Membrane Nano Materials Used in Industrial Design Effect of Casting Velocity on Microstructures of Almg0.9Si0.7 Alloy by Low-Superheat DC Casting Structure of Chromium Atomic Chains The Influence of Debonding Interface on the Effective Mechanical Properties for Nano-Composites Dispersion of Single-Walled Carbon Nanotubes in Water by a Conjugated Surfactant Magnetic Induction Effect of Rare-Earth La Modified FeSiB Amorphous Ribbon Analysis of Failure Mechanism for a Diversion Ditch in Lake Beach Experimental study and Parameters Optimization of Laser Milling on Al2O3 Ceramics Facile Synthesis of Ammonium Aluminum Carbonate Hydroxide Multilayered Nanofiber by Using Solid State Reaction Synthesis of SnO2 Nanoparticles with Varying Particle Sizes and Morphologies by Hydrothermal Method Optimal Design and Characteristic Analysis of a Special Type Gear Test Rig Experimental Study on Porous Metal Bonded Diamond Grinding Wheels - The Selection of Porosity Inducers and Agglomeration's Parameter Study on the Morphology of Nano-ZnO in Foam Glass Optimizing Preparation Technological Parameters of Nano-LiAlO2 Powder by Orthogonal Experiment Research on Nano Porous Cu Films Prepared by Sol-Gel Method A New Method of Producing Carbon Anode by High-Temperature Mould Pressing Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles An Analysis on Performance of High-Speed Gear Dynamics Based on Transfer-Matrix Method Rectifying Properties of La1-XSrXMnO3/Si (x=0.2, 0.04) PN Heterostructures Preparation and Evaluation of Sodium Hydroxymethyl Lignosulfonate as Eco-Friendly Drilling Fluid Additive Solvothermal Synthesis and Photoluminescence of Rod-Like YVO4:Dy 3+ Nanocrystals Harmful Gas Measured Research for GuanJiao Tunnel on Qinghai-Tibet Plateau Region Preparation of Carbon Nanofibers from Polyacrylonitrile Nanofibers by Electrospinning Preparation and Characterization of Ag, Au and Ti Metal Nanoparticles Colloids by Pulsed Laser Ablation in Liquids Improve the Temperature Resistance of Guar Gum by Silanization GaN-Based LEDs on Nano-Patterned Sapphire Substrates Study on the Structure and Properties of Surface Nanocrystallized Zr-4 Effect of Alkali and Silane Treatment on the Thermal Stability of Hemp Fibers as Reinforcement in Composite Structures Preparation and Characterization of Ag Nanowires by Hydrohermal Method Enhanced the Property of PP/EPDM with CaCO3 A Novel Rectangle Plasmonic Optical Nano-Antenna with Two Protrusions in the Middle Gap Effects of Pd and Ni Metals Electrolessly Deposited on Si Nanowires on Properties of Photoelectrochemical Solar Cell Kinematics Simulation of Industrial Robot Based on MATLAB Manufacture and Characterization of TiO2 Nanowires by CVD A Study of Divergence on still Point Charge and Moving Point Charge in the Vacuum Passive Space Dry Sliding Wear Behaviour of Fe-Based Powder Sintered Steel The Geometrical Characteristic Description Method of Part Drawing The Nanocrystallinity Enhancement of Sol-Gel Derived TiO2 Nanoparticles by Pre-Hydrothermal Treatment Extraction Feature of Gas Flucturation of Guideway System Based on the Wavelet Transform The Optimization of Thermomechanical Treatment and Properties of Cu-Fe-P Alloy C194 Establishment and Application of Simulation Mode on the Nano-Conductive Carbon Black Process Effect of Additives on Thermal Decomposition of Phosphogypsum A New Fuzzy Parameters Reliability Analysis Model Effect of Laser Fluence on Siliver Nanoparticles Colloid Microstructure Characterization of Al Nanoparticles Prepared by Anodic Arc Plasma Rectifying Property of the Heterojunction Composed of La0. 8Sr0.2MnO3 on Si with and without SrMnO3 Diffusion Barrier Layers Micro Cantilever Beam Theory for Transverse Dynamics Using a Continuum Mechanics Model Performance Study of ZrO2-Al2TiO5 Composite Prepared by Solid Phase and Coprecipitation Method Preparation and Characterization of SnO2/TiO2 Composite with Low Infrared Emissivity Chapter 3: Iron and Steel Kinematical Analysis on Three-DOF Cylindrical Industrial Manipulator Study on Cooling Process of Hot Rolled Wire Rod with Dual Phase Microstructure The Influence of Cold Working on Semiconducting Properties of Passive Film and Pitting Corrosion Resistance of High Nitrogen Austenitic Stainless Steel The Design Study of New Insulation Board Synchronous Fixed-Length Cutting System Research on the Effect of Microalloy Elements Mo and Nb on CCT Curve of Q&P Steel The Effect of Trace Boron Element on Local Corrosion Resistance of Casted 0.04C-16Cr Ferritic Stainless Steel Optimization Design on Dynamic Reliability of a Tension Bar Secondary Hardening during Tempering of Cr-W-Mo-V High Alloy Medium-Upper Carbon Steel and its Hardness Forecast FEM Analysis of the Mechanical Strain and Stress Characteristics of Continuous Casting Bloom under the Operation of Soft Reduction Research on the Annealing Process of AISI4145H Steel Effect of Casting Design to Microstructure and Mechanical Properties of 3 Mm TWDI Plate Experimental Study on the Welding Property of Different Gauge Laser Tailor-Welded Blanks Fully Automatic Wafer-Scale Micro/Nano Manipulation Based on Optically Induced Dielectrophoresis Thermodynamic Research on Smelting Master Alloy by Direct Reducing Boron Oxide Effect of Coiling Temperature on Oxide Scale of Hot-Rolled Strip Effect of Envelope Films on Thermal Properties of Vacuum Insulation Panels with Glass Fiber Study on SH-CCT Diagram and Weldability of S890 Steel Test Research on Single Point Impact of a Liquid Foundation Mechanical Properties and Fracture Characteristics of Ultra-Microduplex Structure in High Carbon Steel Research on Contact Fatigue of Cylindrical Gear Effect of Cold Reduction Ratio on Deep-Drawing Performance of High Strength Ti-Nb-If Steel Sheets Stability Study on Perforated Columns in Steel Storage Racks under Axial Compression The Microstructure and Creep Strength of 403Nb Martensitic Heat-Resistant Steel EBSD Characteristics of HSLA100 Steel Quenched in the 2-Phase Region The Influence of the Residual Mg Content in the Ductile Cast Iron on the Formation Law of Spherodial Graphite Research on Effect of Temperature on Nitrogen Solubility in Steel Based on Grey Prediction and Fuzzy PID Control Method UG and VERICUT-Based Processing of Special-Shaped Stone Samples Relationships between Phase Transformation and the Crack Formation in Continuous Casting Slabs A Comprehensive Utilization of Laterite Nickel Ore Microstructure and Property Control of Hot Rolled DP600 Steel Effect of Heat Treatment on Microstructure and Mechanical Properties of 800MPa Grade Ultra Low Carbon Bainite Steel Microstructure and Texture Evolution of Strip Casting Fe-6.2wt%Si Steel Performance Characteristics of the Steels for High-Rise Buildings Development of Processing Maps for Coiled Tubing Steel A Modified Method of Life Analysis Based on Unascertained Theory A Study of the Inhibition of Iron Corrosion by Glutamic Acid Derivatives Self-Assembled Films Research on Microwave Carbon-Thermal Reduction of the Preparation Concentrate of Coarse Niobium The Effect of Bainitic Transformation on Martensite Start Temperature of a Fe-C-Mn-Si Alloy Chapter 4: Ceramic Developing the Crystalline Structures and Dielectric Properties of Excess Bi2O3-Added 0.95(Na0.5Bi0.5)TiO3-0.05BaTiO3 Ceramics Development of a Phenomenological Method for Description of Crack Initiation Behavior under Thermo-Mechanical Fatigue Loading Backpressure of Three-Dimensional Reticulated Structure Silicon Carbide Ceramics Foam Filter Effects of BN Dopant on Electrical Characteristics of Barium-Excessive BaTiO3 Ceramics for Laminated Positive Temperature Coefficient Thermistors Fabricated by Tape Casting Technique Effect of Ni Electrode on the Characteristics of BaTiO3 Based PTCR Ceramics Fabrication of Lead-Free and High Tc Positive Temperature Coefficient of Resistivity Ceramics Sintered in Air Influence of Sintering Temperature on the Properties of Porous Quartz Ceramics via the Atmospheric Pressure Sintering Method Dielectric and Ferroelectric Properties of (K0.5Na0.5)(Nb1 xVx)O3 Ceramics Study on Low-Temperature Fast-Firing CuO-MnO2-TiO2-NiO with Oxidizing Flame in the Preparation Process of Metallic Lustre Artistic Glaze Optimization Synthesis, Thermal Expansion Properties and Raman Spectroscopic Study of Ca1-xSrxZr4P6O24 Ceramics Temperature Field of Single-Well Aquifer Thermal Energy Storage in Sanhejian Coal Mine The Influence of Ba-Ti Ratio on the Electrical Properties and Microstructures of the BaM-0.007Sm0.007TiO3 Based Ceramics Fired in Reducing Atmosphere Preparation of Porous Lightweight Ceramics and Fibre Joining Materials Effect of Fe2O3 Dopant on Electronic Densities and Electrical Properties of ZnO-Based Varistors Temperature Stable Bi1.3Yb0.7O3-BaTiO3 Relaxor Ferroelectric Effect of Bi2O3 Addition on the Physical and Electrical Properties of Lead-Free (Na0.5Bi0.5)TiO3-Ba(Sn0.08Ti0.92)O3 Ceramics The Evaluation of Wheelchair Comfort Based on Analytic Hierarchy Process Influence of CeO2 Nanopowder on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic Materials The Influences of NaNbO3 on the Dielectric and Structure Characteristics of (1-X) (Na0.5Bi0.5)TiO3-x NaNbO3 Ceramics Study on Microstructure of ZnO Lighting Arrester with High Voltage Gradient Influence of La2O3 Nanopowder on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic Materials Effect of La2O3 Addition on the Microstructure and Electrical Properties of Copper-Nickel Manganese Thermistors Chapter 5: Metal Alloy Materials Fracture Behavior and Microstructure of 60Si2MnA Spring Steels Modified by V-Nb Inoculants The Effects of Rolling and Annealing on the High Speed Impact Deformation Behavior of Mg-3%Li-1%Ce Alloy Plasticity and Fracture Mechanism of Refine-Grain AZ31 Magnesium Alloys Sheet Thermal Characterization of Polyurethane from Castor Oil Reinforced Sugarcane Straw Composites Effect of Solid Solution on the Microstructure and Performance of Nuclear Power Slot Wedge Copper Alloy Electromechanical Analysis of a Beam Piezoelectric Transducer Energy Harvest Device Titanium Boride in High Nb Containing TiAl Alloy: Morphology and Effect on Mechanical Properties Study on Nitridation Behavior of Mg-Ca Alloy under Nitrogen Influence of Nb and Sn on d Electrons of TiAl Alloys Studied by Coincidence Positron Annihilation Spectroscopy Microstructural Formation in Novel Co-Base ODS Alloys Produced by Mechanical Alloying Effect of Tool pin Profile and Axial Force on Tensile Behavior in Friction Stir Welding of Dissimilar Aluminum Alloys Constitutive Equation of an Al-12.7Si-0.7Mg Alloy in Superplastic Deformation Preparation and Mechanical Properties of a Bulk Icosahedral Quasicrystalline Ti-Zr-Sc-Ni Alloy Tensile Properties of Hot Extruded Mg-Zn-Nd-Y-Zr Alloy at Elevated Temperatures Application of Benzyl Ester of Modified Vegetable Oils as Rubber Processing Oils Phase-Field Model for Spinodal Decomposition of Dilute Solute Field in Al-Ag Alloy Research on the Shrinkage Cavity and Broken Graphite Mold Core of Copper Alloy in Horizontal Continuous Casting In Vitro Bioactivity of a Biocomposite Fabricated from Ti and Mg Powders by Powder Metallurgy Method Effect of Different Aging Temperatures on Interfacial Reaction between SAC305 and ENEPIG Surface Finish Influence of Combined Processes between Gas Soft Nitriding and Carburizing to Hardness of Low Carbon Steel The Discovery and Preliminary Analysis of an Ancient Kiln Site near Cao Village in Linzhang Town of Hebei Province Synthesis and Characterization of Siloxane-Modified Polyurethane Dispersion/Clay Nanocomposites Circumferences Lead to Enhancements of Nonresonant Third-Order Susceptibilities for Carbon Nanotube Bundles Chapter 6: Biomaterials Preparation and Characterization of the Lignocellulose Aerogel The Research on the Interfacial Adhesion of Polypropylene-Magesium Hydroxide Composite Modified by Different Compatibilizers Quantitatively Ca3SiO5 Particles Adherence Affected the Teeth Enamel Remineralization Measure of the Photosynthetic Efficiency of the Ficus Altissima Leaves by Using Photo-Acoustic Tomography Spectroscopy Technology Preparation of MIP Microspheres by Precipitation Polymerization with 1-Phenyl-1-Propanol as Template Preparation of Starch/PS-g-MAH Blends and Effect on Controlled Release of Herbicide Contact Analysis of Prosthetic Knee Joint Using ANSYS Quick Cultivation of Micro-Aerobic Granular Sludge for Simultaneous Nitrogen Removal The Green Design of Modern High-Rise Office Building Internal Space Preparation of Phenol-Formaldehyde Foams Using Fulvic Acid Evaluation of Tribological Performance of PTFE Composite Filled with Rare Earth Treated Potassium Titanate Whiskers Application of Biodegradable Polymers on Hydroseeding Effect of the Starting NCO/OH Molar Ratio on the Structure and Properties of Polyurethane Comparative Analysis on Chemical Composition and Charcoal Characterization of Two Miscanthus Species Preparation of Salt-Resistance Superabsobent Microspheres by Inverse Suspension Polymerization Study of Self-Assembled Monolayers of Stearic Acid on Pure Magnesium Surface Chapter 7: Optical/Electronic/Magnetic Materials A Theoretical Study on Photosensitizers of Solar-Energy Cell: Transition Metal Carboxyphthalocyanine Complexes Fabrication and Thermoelectric Properties of Magneli Phases by Adding Ti into TiO2 Irradiation Damage of Electron-Beam on High-Power AlInGaP Red LED Theoretical Energy Distributions of Electrons from a Large Exponential-Doping GaAs Photocathode The Study of Thermal Effect in Liquid Crystal Director Study on the Synthesis and Application of THPS-OMMT-MDFP Nanocomposite Flame Retardant A Study on Step-Like Magnetization Curves in Tb3Ga5O12 at Low Temperature Fluorescent Carbon Dots (CDs) as a pH Sensor Effect of Annealing Temperature on the Properties of Silicon Crystal Characteristics of Two-Stage -Gate on AlGaAs/InGaAs/AlGaAs DH-HEMTs by Using AlGaAs/InGaP Etching-Stop Layers Preparation of Y4MgSi3O13:Tb3+,Ce3+ Green Emitting Phosphor for White Light Emitting Diodes and its Luminescence Study Experimental Verification of Circuit Analog of Three- and Four-Level Electromagnetically Induced Transparency A New Method to Measure the Absorption Coefficient of the Automotive Driving Room Based on the Sound Pressure Delaying Optical Study of Poly (9,9-Dioctylfluorene) Isolated by AIB2OB3 Flat Rafts Organic Light Emitting Diodes with Metallocene Compounds as Cathode Interfacial Layers Synthesis and Properties of Spirosilafluorene Oligomer 2.1 m Room Temperature Continuous Waves Operation of InGaAsSb-AlGaAsSb Double-Quantum Well Laser The Enhanced Saturation Magnetization of Nanocrystalline (Ni0.5Zn0.5)1-xCoxFe2O4 Ferrite Second-Harmonic Generation of the Chalcogenide Amorphous Film by Electron Beam Irradiation Synthesis and Photoluminescence Property of Tris(8-hydroxyquinoline) Bismuth Rod-Like Structures at Room Temperature The Fluorescent and Photovoltaic Properties of Meso-Teraphenyl Porphyrins with Different Substituents Heat Transfer Coefficient Prediction by FEM in the Hot Strip Rolling Effect of Two Diferrent Mesogens on Liquid-Crystalline Properties of Chiral Side-Chain Liquid-Crystalline Polysiloxanes Microwave Absorption Performance of La0.7 Sr0.3 MnO3 with Different Sintering Temperatures The Time Response of Exponential Doping NEA InGaAs Photocathode Applied to near Infrared Streak Cameras Tunable Magnetism and Half-Metallic Stability of Half-Heusler Compound NiMn1-xNbxSb Chapter 8: Building Materials UV Ageing Test and EIS Study of Fluorocarbon Resin Coatings on Galvanized Sheet Application the Thermomechanical Damage Modeling Approach with Generalized Non-Linear Strength Theory Experimental Study on the Effect of Steel-Tube Replacement Ratio on the Eccentric Compression Bearing Capacity of Composite Column Difference between the Measured and Theoretical Value and Theirs Influencing Factors for Heat Transfer Coefficient of Exterior Wall External Insulation Ground Adaptability Characterization for Digging in Complex Geotechnical Conditions and Risk Mitigation Study on Conductive Mechanism of Carbon Fiber Filled Cement-Based Composites Damage Model for Dissipative Materials with Generalized Non-Linear Strength Theory Synthesis, Crystal Structure and Spectroscopy of Dibutyl Ester-Ether Fluorescein Synthesis and Surface Properties of a Novel Switchable Bolaform Surfactant First-Principles Study on Mechanical Properties of IVB-Group Transition-Metal Nitrides TiN, ZrN, and HfN Characteristics and Applications of the AAm-Grafting PE Study on the Performance Influencing Factor of Epoxy Asphalt Waterproof Cohesive Layer in Steel Deck Pavement Influence of Calcination Temperature on Activity of Hydration Properties of Gangue Adhesion Mechanism Analysis of Prepainted Steel Sheet at UV Ageing Test Effect of Carbon Fiber Gradient Distribution on Heat Property of Electrically Conductive Cement Mortar Study of Ground Lateral Flow on Piles Foundation due to Soil Liquefaction Phase Field Model for Influence of Edge Dislocation on Precipitation Research on Solid Wastes of Gangue, Slag, Fly Ash Used as Cement Composite Mixing Materials The Use of Residual Rice Husk Ash from Thermal Power Plant as Cement Replacement Material in Producing Self-Compacting Concrete Improvement of Resistance of Concrete Against Chloride Ingression Using a New Admixture Study on the Workability of Self-Compacting Lightweight Aggregate Concrete with Orthogonal Experiment Method Preparation and Performance Investigation of Phenolic Foam Wavelet-Based Denoising of Vibration Signals for Tool-Edge Wear Detection in High Speed Machining of Inconel 718 Study on Relationship between Structural Parameter and Performance of Gas-Solid Separator The Experimental Studies on Self-Heat Conserving Facade Panel with Waste Fibers Effects of Pebble Aggregate in Xinjiang Area on Concrete Performance Performance of Asphalt Mixture Used for Asphalt Treated Base of Perpetual Pavements Effect of Differential Speed Rolling on Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Sheets Research on Fractal Characteristics of Cement-Based Materials by Nitrogen Adsorption Method Under Uniaxial Compression of Rock Specimens of Two Cracking of Shear Failure Mode Analysis Chapter 9: New Energy Materials and Environmental Materials Screening of Yeast with High-Yield Single Cell Protein and Preliminary Optimization of its Culture Codition Improved the Physical and Electrochemical Hydrogen Storage Kinetics of Mg2Ni-Type Alloys by Substituting Ni with Co and Melt Spinning Green Energy Anode Materials: Pyrolytic Carbons Derived from Peanut Shells for Lithium Ion Batteries In Situ Quaternized Gel Electrolyte for Quasi-Solid-State Dye-Sensitized Solar Cell Preparation and Coagulation Performance of Poly Silicate Aluminium Ferric Boron (PSAFB) Preparation and Photoelectric Properties of Spinel MCr2O4 (M = Cu, Ni) Nanopowders Thermodynamics of Phenol Adsorption onto Activated Carbon Fiber Enhanced Electrochemical Cycle Stability of RE-Mg-Ni System A2B7-Type Alloys by Melt Spinning and Substituting La with Pr Performance Enhancement of Organic Solar Cells with the LiF/Al Cathode Structure by the Pyromellitic Dianhydride Layer Improvement of the Properties of CuInS2 Thin Film Prepared in Sulfate System Thermoelectric Properties of BaxCo4Sb12 Prepared by High Pressure and High Temperature Preparation and Properties of Corn Gluten Meal/Poly (Lactic Acid) Composite Starch-Chitosan Blend Films Prepared by Glutaraldehyde Cross-Linking Study on the Effect of Carboxyl Bagasse Hemicellulose on Heavy Metal Adsorption Numerical Simulation and Optimization on Casting Process of Mould Clamping Board Using a Nodular Cast Iron Theoretical Study of the Effect of Ca Doping on the Electronic Properties of LiCoO2 Study on Diffusion of Copper of SOFC Cu-Based Anodes in Co-Sintering with Electrolyte Control of Surface Quality of if Steel Sheet Study on the Performance of the Modified Single Base Gun Propellant Immobilization of Cadmium and Lead in Contaminated Soils by Different Amendments Preparation of Cationic Rice Husk Flocculant and its Flocculating Characteristics Preparation and Performances of Amino-SiO2 Filled Cellulose Film Decolorization of Coking Wastewater by Mineral Adsorbents Phase and Electrical Properties of [Li0.065(Na0.535K0.48)0.95]NbO3 Lead-Free Piezoelectric Ceramics Sintered at Low Temperature An Investigation on the Electrochemical Cycle Stability of La0.75 xZrxMg0.25Ni3.2Co0.2Al0.1 (x = 0-0.2) Alloys Prepared by Melt Spinning Electrochemical Performance of LiFePO4/C Positive-Electrode Material Prepared via a Rheological Phase Method Comparison Proximate Analysis and Heating Value between Cassava Rhizome and Perennial Wood Experimental Research on Hydrogen Storage Characteristics of TBAB Hydrates Experimental Study on the Optimal Thickness of Infiltration Media of the CRI System Enhanced Gaseous Hydrogen Storage Kinetics of Mg2Ni-Type Alloys by Melt Spinning and Substituting Ni with Cu Preparation and Performance of Controlled-Release Tablets of Sasanquasaponin Capillary Adsorption of Nanostructure Carbonic Materials for Nitrobenzene in Wastewater Synthesis of Al-Doped Lithium Manganese Oxide from Al2O3-Li2CO3-MnO2 Ternary System Research of Poly (Ethylene Terephthalate) Modified by Calcium Lignosulfonate Control Technology of Internal Quality for CC Billet Comparative Experiment Study on the Total Phosphorus Removal Efficiency of Different Infiltration Media Combinations in the CRI System Study on the Influence Factors of Desilication in Bioleaching by B. Mucilaginosus A New Interwell Tracer Technology - Particle Tracer Technology Discussion on Pavement Recycling Techniques in China Vertically Aligned CuInS2 Nanorod Arrays Prepared by Sulfurization Method with Porous Alumina Template Preparation and Application of <110> Dislocation-Free Monocrystalline Silicon by CZ Method Preparation of Nanosize Anatase TiO2 by a Simple, Low-Cost Method and their Performance in Dye Sensitized Solar Cells Chapter 10: Biomaterials and Chemical Materials ZM Solid Catalysts for Synthesis of 1-Butoxy-2-Propanol with High Selectivity Synthesis and Properties of a New Gemini Surfactant with Amide Group as Spacer The Transdermal Absorption Study of Human-Like Collagen Eco-Material Applied on the Interior Wall Decoration Synthesis and Characterization of Polyimides Derived from 5-Amino-2(p-aminophenyl) Benzoxazole Monomer Preparation and Adsorption Properties of Gelatin Microspheres for Cationic Dye The Recent Advance of Molecularly Imprinted on-Line Solid Phase Extraction and its Application in Sample Pretreatment - A Mini Review New Synthesis Method of the Lamellar Zinc Phosphate and its Electrochemical Corrosion Inhibitions Preparation and Characterization of Silk Fibroin/Hydroxyapatite Bilayer Scaffolds Microstructural Modifications in Electron Beam Irradiated Poly(ethylene terephthalate) Fibrics Design and Synthesis of PEG Curcumin Monomer for the Comb-Like Polymer Prodrug The Synthesis and Properties of 3-(2'-Benzothiazolyl)coumarin Fluorescent Dyes for Polyester Fabrics Long-Chain Organofunctional Silanes: Synthesis and Surface Derivatization The Biocompatibility and Bioactivity of Gradient Composite Bioceramic Coating with Different Content of Nd2O3 Fabricated by Wide Band Laser Cladding The Application of High Pressure Electrostatic in Microcapsule Preparation Application of Ultrasonic Wave in Dyeing of Feather Fibers The Synthesis and Characterization of Nadic Dialkyl-Ester Derivatives with Trialkyl Borate Chapter 11: Thin Films The Influences of Annealing Temperatures on the Properties of the Sol-Gel Deposition SrBi4Ti4O15 Thin Films Simulation of the Effect of Power on the Properties of Si-Based Films Deposited by PECVD Residual Stress and Dielectric Property of Al2O3 Films on N-Type Si-(100) Substrate Effects of Deposition Parameters and Annealing Temperatures on the Characteristics of the Sr0.6Ba0.4Nb2O6 Thin Films Effects of Deposition Temperatures on ZnO:Al Films Deposited on Polymer Substrates by RF Magnetron Sputtering Effects of RF Power on Crystallinity Properties of ZnO Films Deposited by Helicon Wave Plasma Assisted Sputtering Organic Plasma-Polymer Thin Film Coatings on Super-Hydrophilic Coated Surface for Increasing the Surface Durability against Scratch without Changing of Surface Wettability Effect of Nonstoichiometric Pb Content on the Properties of PZT Ceramics Thickness Effect on Spin Moment in Amorphous Co0.9Fe0.1 Films Effect of Neodymium Salt in the Anodization of Aluminum in Sulphuric Acid Study on a New Method to Produce NiTi Thin Film Effect of Cryogenic Treatment on Improving the Fracture Toughness of TiN Coated Cemented Carbide Effect of Microstructure on the Corrosion Behavior of TiN Coatings The Effects of Substrate Material and Surface Roughness on the Structure of SnO2 Films Studying on Thickness Control of ITO Films Deposited Using RF Magnetron Sputtering Impedance Spectroscopy Analysis of p Type Li Doped ZnO Thin Film Effect Preparation of FePt Film via Electrochemical Deposition Method Corrosion Behavior of CrN/AlSiN Multilayer Coatings on AISI 304 Stainless Steel in Aluminum Alloy Melt Fabrication of TiO2/Cu Composite Photocatalyst Thin Film by 2-Step Mechanical Coating Technique and its Photocatalytic Activity High Saturation Magnetization Fe-Co-N Thin Film Deposited by Facing-Target Direct Current Magnetron Sputtering Effects of the Substrates Temperatue and Argon Oxygen Ratio on ZnO Thin Films Resistivity Control in Unintentionally Doped GaN Films Grown on Si (111) Substrates by MOCVD XPS Study on Barium Strontium Titanate (BST) Thin Films Etching in SF6/Ar Plasma Design and Synthesis of DLC Films with Different sp3/sp2 Ratios by Middle Frequency Magnetron Sputtering Chapter 12: New Functional Materials Tunneling Properties in GaAs/Al0.33Ga0.67As/InxGa1-xAs Double-Barrier Resonant Tunneling Structures Study on TlBr Single Crystal Growth Using Improved Electro Dynamic Gradient Method Piezoelectric and Dielectric Properties of MnO2-Modified Bi(Mg1/2Ti1/2)O3-PbTiO3 Effect of Hetero-Interfaces on Rashba Spin-Orbit Coupling in a Gated In0.53Ga0.47As/InP Quantum Well Structure The Synthesis, Characterization and Photocatalytic Property of K2La2Ti3O10 Effect of Vitreous Fluid Temperature on Fiber Diameter and Surface Topography of Glass Wool by Centrifugal-Spinneret-Blow Process Low-Frequency Damping Behavior of Porous Magnesium Study on Microstructure and Electrical Properties of ZnO Varistor Ceramics The Research Situation and Development Trend of Energy Saving Phase Change Materials Studies on Dynamic Adsorption and Desorption of Total Flavonoids with Ion-Exchange Fiber Effect of Al Ions on Adsorption Efficiency of Mesoporous Organosilica for Water Treatment Waterborne Polyurethane: Effect of Functional Groups in Aromatic Isocyanate and the Chain Length of Hydroxyl Terminated Natural Rubber Photoelectrochemical Biofuel Cell Using Triarylamine Dye-Sensitized Titanium Dioxide Film as Photoanode Dynamic Analysis and Simulation of Variable Topology Parallel Tire Building Drum Mechanism Synthesis and Characterization of Mn Doped ZnO Nanorod Arrays Corrosion Resistance Mechanism of MgO-ZrO2 Brick in RH Degasser Slag Metallographic Study of Laser Thermal Fatigue Damage on Piston Effect of Ce Addition on the Microstructures and Mechanical Properties of a Ni-Co-Based Superalloy Effect of Packaging Materials and Process on the White LED Fabricated with Quantum Dots Study on the Anti- Corrosion Properties of Organic and Inorganic Inhibitor by Electrochemical Treatment in Aqueous Solution Study on the Development of a Thin-Film Corrosion Sensor for the Monitoring of Cl Ion Penetration into Cementitious Materials Study on FCAW Semi-Automatic Welding Procedure of Girth Weld Joint of Line Pipes Chapter 13: Materials and Design Experimental Research on Explosion-Protection Performance of Porous Meshy Aluminum Alloy Material The Parameter Influence of Electron Beam Irradiation on GaN Based Blue LED Influence on Structure and Composition of Carbon Supported PtCu-LaOx Composite Membrane Electrode by Acid Treatment Deformation Effects on Metal Magnetic Memory in API 5L X70 Steel A New Extensional Viscosity Model Based on the Cross Model for Polymer Fluids A Research on Static and Dynamic Fracture-Resistance of Welding Parts of Coolant Piping Material Hyperelastic Model Selection of Tissue Mimicking Phantom Undergoing Large Deformation and Finite Element Modeling for Elastic and Hyperelastic Material Properties Analysis on the Influence Factors of Casing Collapse Resistance Strength Study on the Safety Assessment System of Fire Hazard in Coal Mine Study the Non-Linear Heat-Elasto-Plastic Constitutive Relation Grain Boundary Relaxation in a Fe-Cr-Al Alloy Effect of Loads on the Wear Properties of La2O3-MoSi2 Composite against SiC at Elevated Temperature Effect of Moisture Absorption on the Residual Strength after Bending Fatigue of CFRP Failure Analysis of Automobile Redirector Nonlinear Vibration of a Cantilever FGM Rectangular Plate with Piezoelectric Layers Based on Third-Order Plate Theory Measure of the Optical and Electrical Properties of Semiconductor SiO2 Nano-Crystalline by Using Photo-Acoustic Technology Experiment Study on Aviation Kerosene's Flash Point Temperature of Low Pressure Environment Study of Screw Loosening in Abutment Subject to Occlusal Loading Iterative Perturbation Methods for Isolation Structure Dynamic Model Responses Calculation with Non-Classical Damping and its Correlation Analysis Enthalpy Relaxation during Non-Isothermal Crystallization from the Melt of Polymer: For IPP as Example The Effect of Thai Compost on Biodegradability of Polylactic Acid Based on ISO 14855-2 Method Study on Tribological Behavior and Mechanisms of Weldox960 Steel Application of Shape Memory Alloy Actuators to Control the Displacement of an Adaptive Beam Study on the Dynamic Radial Tensile Test Method of Thin-Walled Tube Structure with Special Ring Section Analysis on Crystal Structure of 7A-Halloysite Use of Impact Testing to Assess the Softness of Bedding Materials A Study on the Fatigue Life Prediction for Bending Pipe Failure Analysis of the Stuffing Box in a Super High Pressure Compressor Compression after Impact Performance of Composite Stiffened Panels Effect of Vacuum Thermal Cycling on Mechanical and Physical Properties of an Epoxy Matrix Composite Mixed-Mode Bending Test for Fracture Toughness of Composite Bonding Adhesive Layer Experimental Investigation of Tensile Properties and Fracture Mechanism of WCP/Cu Composites Reinforced with Different WCP Volume Fraction Improved Properties of CENR/PP Blends by Using Compatibilizers for Promoting the Interfacial Adhesion between Phases Evaporation Characteristics of Ammonium Formate-Urea-Water Solution Droplet for SCR Systems A Study on the Structural Design and Sensing Performance of Conductive Woven Fabric Embedding CCFs Degradation Behavior of Tungsten in Molten Aluminum Nonlinear Constitutive Equation and Elastic Constant of Rubber Material Mechanism and Effect of Electrochemical Modification on Physicochemical Soft Rock The Compaoparison of Characteristics of Fracture Toughness of Materials for Nuclear Piping by Use of Various Types of Specimens High-Pressure Electronic and Optical Properties of -Si3N4 Corrosion Behavior of Drilling Pipe Steels for High Sour Gas Field Fatigue Crack Propagation Simulation of Rubber Shock Absorbers Analysis of Collisions of Vehicle and Concrete Barrier on Rural Highways Effect of Moisture Absorption on the Bending Fatigue Performance of Carbon/Epoxy Laminates Design of a Kind of Small Sample and Determination of Initial Tensile Stress for Implant Test Experimental Observation on the Uniaxial Cyclic Deformation Behaviour of TA16 Titanium Alloy Modeling of Hydrogen Weight Storage Capacity in Solid Porous Silicon Aircraft Three-Proof Index System Establishment and Evaluation Method Study A Comparative Study of the Effect of Crosslink Agents and Chemical Modification on Properties of Natural Rubber Vulcanizates Experimental Analysis of Aluminum Alloy Section Bars and their Mortise and Tenon Joints under Bending Load Preparation and Performance Testing of Tubular Cathode Support for Direct Ethanol Fuel Cell

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB09072566
• ISBN:
  • 9783037853252
• LCCN: 2012382490
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v.
• 大きさ: 25 cm
• 分類:
  • LCC : TS183
• 件名:
  • LCSH : Manufacturing processes -- Congresses
  • LCSH : Materials science -- Congresses
  • LCSH : Nanoparticles -- Congresses
  • FREE : Conference papers and proceedings lcgft
• 親書誌ID:
  • BA24926058