Advanced materials : selected, peer reviewed papers from the Second International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011), December 16-18, 2011, Guilin, China
Author(s)
Bibliographic Information
Advanced materials : selected, peer reviewed papers from the Second International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011), December 16-18, 2011, Guilin, China
（Advanced materials research, v. 415-417）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
- Part 3
Available at 1 libraries
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
These volumes comprise papers, on the topic of "Advanced Materials", selected from the second International Conference on Advances in Materials and Manufacturing (ICAMMP 2011) held on the 16-18th December 2011 in Guilin, China. The 468 peer-reviewed papers are grouped into the chapters: 1: Composites, 2: Micro / Nano Materials, 3: Iron and Steel, 4: Ceramic, 5: Metal Alloy Materials, 6: Biomaterials, 7: Optical/Electronic/Magnetic Materials, 8: Building Materials, 9: New Energy Materials and Environmental Materials, 10: Biomaterials and Chemical Materials, 11: Thin Films, 12: New Functional Materials, 13: Materials and Design.
Table of Contents
Preface, Sponsors and Organizers
Chapter 1: Composites
Study on Reliability of New Fixture Method for NOMEX Honeycomb
Study on Elevated-Temperature Performance of LiCo0.02Cr0.02Mn1.96O4 by Surface Modification
Singular Problems of Spherically Uniform Anisotropic Piezoelectric Solids
The Growth Mechanism of MgO in the ZnO Coated Mg2B2O5 Whisker Reinforced AZ31B Composite
Study on the Absorption Properties of Spinel Type Ferrite Composite Coatings in the Low Frequency
Study on Nano-Particle Modified Epoxy Resin Adhesive
Elastic Dynamics Optimization Design of Novel High-Speed Spatial Parallel Robot
Retard of D-Galactose-Induced Aging in Mice by Whey Hydrolysates
Preparation and Thermoelectric Characteristics of SiO2/Mg2Si0.8Sn0.2 Bulk Nanocomposite
Effect of Grinder Guiding Error on the Machining Precision of Large Scale Surface Workpiece
Random Response Analysis for Nonlinear Systems of Composite Laminates
The Viscous Coefficient Comparison between 2-D and 3-D Fluid Models in Molecular Dynamics Simulations
Study on the Effect of Ways of Gear Relief on Contact Force of Teeth Face
NbC and VC Nanoparticles Reinforced Fe-Si-Mn Matrix Composite In Situ Synthesized by Plasma Jet
Al Ion Implantation of SiC Coated Carbon Fiber-Reinforced SiC Matrix Composites by Metal Vapor Vacuum Arc Ion Source
The Strength Model of Small Parameter Scroll Wrap in a Scroll Compressor
The Synergy Effects of Styrene-Maleic Anhydride Copolymer and Epoxy Resin on Interface Adhesion of ABS/Short Glass Fiber Composites
Effects of Concentration of Alkaline Treated SF on the Tribological Properties of POM Composites Filled with LDPE and Sisal Fibers
Comparative Study on the Mn2+ Removing Performance of Several Filters
A Risk Management Framework for Users' Integratation in Product Innovation
Nano-Sized Silica Reinforcement of Epoxidized Natural Rubber Prepared in Latex State
Iterative Learning Control Based on Radial Basis Function Network for Exoskeleton Arm
Influence of outside Environmental Variations on Adsorption Characteristics of Waste Dusty Slag /EPDM Composite
Esterification and its Kinetics of Acetic Acid with 2-Methoxyethanol over a Ce-Pillared Layer Clay Catalyst
Preparation and Analysis of Cotton Nonwoven Film Strengthened by Chitosan
Preparation and Performance of -Sialon Bonded ZrO2 Composites
Structural Design of Rail-Beam Leveler
Effects of Amorphous and Nanocrystalline Inoculants on the Micro-Structure and Mechanical Behavior of Fe-Si-Mn Steels
Prediction Control Method of Spot Welded Nugget Size Based on Finite Element Analysis of Thermo-Electricity Transient
First-Principles Study of the Properties of Clean and Ni-Doped TiC/Fe Interfaces
Microstructure and Wear Properties of In Situ TiC-Cr7C3/Fe Surface Composite
Effect of Manganese Ions on Corrosion Inhibition of PANI for Mild Steel in 0.5 M H2SO4
Low Temperature Fabrication of Platinum/Carbon Black Powder Coating
Accelerated Aging Test and Study of Storage Life Prediction of NBR O-Ring
Crude Oil Adsorption on Fe2O3/EPDM Composite to the outside Environmental Variations
Metal Ions Doped Complex Cobalt Blue Pigment Research
Hysteresis Heat Build-up and Low Temperature Processing of Polymer under the Vibration Force Field
TiCl4 Treatment to the Substrate of Dye-Sensitized Solar Cell for the Applications on BIPV
Microstructure Analysis of in-Plane Quasi-Isotropic Composites Reinforced by Multi-Direction and Multi-Layer Three Dimensional Fabric
Study on Optimal Design of Light-Weight Composite Hood
Influence of Laser Power on the Microstructure and Anti-Corrosion Performance of LHPS NiCrAlY Coatings
Synthesis of Alumina-Tungsten Carbide Composites by Self-Propagating High Temperature Synthesis Process
Study on a Anti-Optimization Method to Identify the Parameters of the Frequency Correlation Viscoelastic Model for Rubber
Particle Size, Structure and Powdering Process of Calcium Carbonate Nanoparticles Filled Powdered Styrene-Butadiene Rubber
Fabrication Mechanism of in-Situ Synthesized Al3Ti-Mg Composites by Vacuum Hot-Pressing
A Empirical Study of Industrial Design Contribution to Advances in Timber Materials Science
Test Study on Overdose Cement Stabilized Crushed Rock Base
Epoxy Cured with Anhydride Terminated Polydimethylsiloxane: Cure Kinetics and Thermal Properties
Preparation and Application of Self-Compacting Concrete-Filled Steel Tube Using Polymer Admixtures
Study on Speciation of Cr in Cement
Study on Hot Dip and Coating Structure of 55% Al-Zn Alloy Coated Steel
Study on Resilience of Mattress Foam and Body Pressure Distribution Characteristic of Mattress
Interaction Mechanism between In Situ Nb2C-V2C Nanoparticles and S/L Interface during the Rapid Solidification of Fe-Nb-V Alloy
Effects of Melting Process on the Microstructure and Thermal Conductivity of Cu-10Ni-5Mo Alloy
Friction and Wear Behavior of POM Composites Filled with LDPE and Wood Fibers
The Influence of Functionalized TiO2 with Poly(methyl methacrylate) on the Mechanical Properties of TiO2/Epoxy Nanocomposites
Transmission Line Characteristics Based on Metamaterials Substrate
Preparation of AlN-ZrO2(Ca) Composites by Pressureless Sintering
Investigation of Carbon Fibre Reinforced Composites Based on Novel Phenylethynyl-Terminated Polyimde
Study on Growth and Crack of Yb:YAG Laser Crystal
Development of Slab Caster Break-Out Alarm ANN System
Morphology and Crystallization Behavior of Toughened Poly(trimethylene terephthalate) Blends with Maleated Styrene-Butylene-Co-Ethylene-Styrene Copolymers
Study on the Densification Process of the High Density Graphite Materials
Investigation of Microstructure and Mechanical Property of the Machinable B4C/BN Composites Fabricated by Hot-Pressing Process
The Shell of Internal Combustion Tamping Pickax Injection Molding CAE Technology Research
Influence of Matrix Aggregates Particle Size Grades on Properties of Grouting Material for Blast Furnace
Development Research of Failure Theories for Thick Composite Laminates
The Experimental Study of TiO2 Nano Compound Coating Applied in Air Conditioner
Synthesis and Properties of Epoxy Resin/Graphite Composites via In Situ Polymerization
Synthesis and Stabilization of BaTiO3/CoFe2O4 Ferrocolloids
Adhesion of TiC/Fe Cermet Interface with C Vacancy: A First-Principles Study
One Simple Finite Element Methodology to Determine the Moduli of Hexagonal Honeycomb
Surface Modification of Carbon Fiber via Atom Transfer Radical Polymerization (ATRP)
Mechanical Design and Virtual Teaching of a Two-Leg Walking Mechanism
Preparation and Characterization of SrO-Al2O3-Fe2O3-B2O3 System Nano-Ferrimagnetic Glass-Ceramics
A New Modifier Prepared and it's Applied in High-Density Polyethylene/Anhydrite Composites
Strain Characteristic of Filament Wound Composite Cylinder under Axial Loading
Flame Retardation of PP/EPDM Composites Containing Ammonium Polyphosphate and its Microcapsules
Precision Predicting and Computer Aided Adaptive Assembly
Study of Diffusion-Homogenization on SiCp/Al Composites Prepared by Elemental Powder
Role of Epoxidized Natural Rubber in Dynamic Mechanical Properties of NR/ENR/silica Composites
Enhancement of Machinability of Inconel 718 in End Milling through Online Induction Heating of Workpiece
Preparation and Performance of a Novel Intumescent Flame Retardant
Research on the Inclusive Materials of the Rice Direct Sowing Technology with Seed Tape
Rapid Prototyping for Treatment of Cranial Reconstruction Surgery
Treatment of Printing and Dyeing Wastewater by the Iron Scurf and Flue Dust Internal Electrolysis Method
Characterization of LiClO4-SiO2 Composite Electrolyte Prepared by Modified Sol-Gel Method
Microstructure Evolution in Preparation of Cu-Sn Contact Wire for High-speed Railway
Chapter 2: Micro/Nano Materials
Modified Model for Static Behavior of Microcantilever Gas Sensor Adsorbed with Monolayer Molecules
Study on Optimization Design of a Hoist Roller
Low Temperature Preparation of ZnIn2S4 by Hydrothermal Method and its Visible Light Photocatalytic Property
Crystal Structures of New Compounds Na0.5Sm4.5Ti4O15 and Na0.5Eu4.5Ti4O15
Study on Recovery of High Temperature Waste Gas from Rotary Hearth Furnace
Research on Generalized Overall Shape Setting Control Models with Asymmetric Shape Control Function for UCM Mill
Green Synthesis of Silk Sericin-Based Silver Nanoparticles
Immobilization of Horseradish Peroxidase on TiO2 Nanotube Arrays via Seeded-Growth Synthesis
Study on Pr-Substituted Bismuth-Iron Garnet Crystallite and its Magnetism
Luminescence Properties of ZnS:Cu,Tm Semiconductor Nanocrystals Synthesize by a Hydrothermal Process
An Effective IQ Assess Method before Information Action
Carbothermal Reduction Synthesis of Superfined TiC Powders from TiOSO4
Interfacial Transition Zone Micro-Structure of Light-Burnt MgO Concrete
Universal Serial Protocol Grammar Analysis Model
The Geometrical Feature Recognition Method of Part Drawing
Study on the Magnetic Induction Effect of Rare-Earth La Modified Amorphous Ribbons
Study on the Filling Particle for Foam Ferrous Metalmaking Needed
Electrical-Pumped Active Plasmonic with InP-Based Quantum Wells
Study on Preparation and Mechanical Intensity of Nano-TiB2/ Tussah Silk Fibroin Composite Membrane
Nano Materials Used in Industrial Design
Effect of Casting Velocity on Microstructures of Almg0.9Si0.7 Alloy by Low-Superheat DC Casting
Structure of Chromium Atomic Chains
The Influence of Debonding Interface on the Effective Mechanical Properties for Nano-Composites
Dispersion of Single-Walled Carbon Nanotubes in Water by a Conjugated Surfactant
Magnetic Induction Effect of Rare-Earth La Modified FeSiB Amorphous Ribbon
Analysis of Failure Mechanism for a Diversion Ditch in Lake Beach
Experimental study and Parameters Optimization of Laser Milling on Al2O3 Ceramics
Facile Synthesis of Ammonium Aluminum Carbonate Hydroxide Multilayered Nanofiber by Using Solid State Reaction
Synthesis of SnO2 Nanoparticles with Varying Particle Sizes and Morphologies by Hydrothermal Method
Optimal Design and Characteristic Analysis of a Special Type Gear Test Rig
Experimental Study on Porous Metal Bonded Diamond Grinding Wheels - The Selection of Porosity Inducers and Agglomeration's Parameter
Study on the Morphology of Nano-ZnO in Foam Glass
Optimizing Preparation Technological Parameters of Nano-LiAlO2 Powder by Orthogonal Experiment
Research on Nano Porous Cu Films Prepared by Sol-Gel Method
A New Method of Producing Carbon Anode by High-Temperature Mould Pressing
Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles
An Analysis on Performance of High-Speed Gear Dynamics Based on Transfer-Matrix Method
Rectifying Properties of La1-XSrXMnO3/Si (x=0.2, 0.04) PN Heterostructures
Preparation and Evaluation of Sodium Hydroxymethyl Lignosulfonate as Eco-Friendly Drilling Fluid Additive
Solvothermal Synthesis and Photoluminescence of Rod-Like YVO4:Dy 3+ Nanocrystals
Harmful Gas Measured Research for GuanJiao Tunnel on Qinghai-Tibet Plateau Region
Preparation of Carbon Nanofibers from Polyacrylonitrile Nanofibers by Electrospinning
Preparation and Characterization of Ag, Au and Ti Metal Nanoparticles Colloids by Pulsed Laser Ablation in Liquids
Improve the Temperature Resistance of Guar Gum by Silanization
GaN-Based LEDs on Nano-Patterned Sapphire Substrates
Study on the Structure and Properties of Surface Nanocrystallized Zr-4
Effect of Alkali and Silane Treatment on the Thermal Stability of Hemp Fibers as Reinforcement in Composite Structures
Preparation and Characterization of Ag Nanowires by Hydrohermal Method
Enhanced the Property of PP/EPDM with CaCO3
A Novel Rectangle Plasmonic Optical Nano-Antenna with Two Protrusions in the Middle Gap
Effects of Pd and Ni Metals Electrolessly Deposited on Si Nanowires on Properties of Photoelectrochemical Solar Cell
Kinematics Simulation of Industrial Robot Based on MATLAB
Manufacture and Characterization of TiO2 Nanowires by CVD
A Study of Divergence on still Point Charge and Moving Point Charge in the Vacuum Passive Space
Dry Sliding Wear Behaviour of Fe-Based Powder Sintered Steel
The Geometrical Characteristic Description Method of Part Drawing
The Nanocrystallinity Enhancement of Sol-Gel Derived TiO2 Nanoparticles by Pre-Hydrothermal Treatment
Extraction Feature of Gas Flucturation of Guideway System Based on the Wavelet Transform
The Optimization of Thermomechanical Treatment and Properties of Cu-Fe-P Alloy C194
Establishment and Application of Simulation Mode on the Nano-Conductive Carbon Black Process
Effect of Additives on Thermal Decomposition of Phosphogypsum
A New Fuzzy Parameters Reliability Analysis Model
Effect of Laser Fluence on Siliver Nanoparticles Colloid
Microstructure Characterization of Al Nanoparticles Prepared by Anodic Arc Plasma
Rectifying Property of the Heterojunction Composed of La0. 8Sr0.2MnO3 on Si with and without SrMnO3 Diffusion Barrier Layers
Micro Cantilever Beam Theory for Transverse Dynamics Using a Continuum Mechanics Model
Performance Study of ZrO2-Al2TiO5 Composite Prepared by Solid Phase and Coprecipitation Method
Preparation and Characterization of SnO2/TiO2 Composite with Low Infrared Emissivity
Chapter 3: Iron and Steel
Kinematical Analysis on Three-DOF Cylindrical Industrial Manipulator
Study on Cooling Process of Hot Rolled Wire Rod with Dual Phase Microstructure
The Influence of Cold Working on Semiconducting Properties of Passive Film and Pitting Corrosion Resistance of High Nitrogen Austenitic Stainless Steel
The Design Study of New Insulation Board Synchronous Fixed-Length Cutting System
Research on the Effect of Microalloy Elements Mo and Nb on CCT Curve of Q&P Steel
The Effect of Trace Boron Element on Local Corrosion Resistance of Casted 0.04C-16Cr Ferritic Stainless Steel
Optimization Design on Dynamic Reliability of a Tension Bar
Secondary Hardening during Tempering of Cr-W-Mo-V High Alloy Medium-Upper Carbon Steel and its Hardness Forecast
FEM Analysis of the Mechanical Strain and Stress Characteristics of Continuous Casting Bloom under the Operation of Soft Reduction
Research on the Annealing Process of AISI4145H Steel
Effect of Casting Design to Microstructure and Mechanical Properties of 3 Mm TWDI Plate
Experimental Study on the Welding Property of Different Gauge Laser Tailor-Welded Blanks
Fully Automatic Wafer-Scale Micro/Nano Manipulation Based on Optically Induced Dielectrophoresis
Thermodynamic Research on Smelting Master Alloy by Direct Reducing Boron Oxide
Effect of Coiling Temperature on Oxide Scale of Hot-Rolled Strip
Effect of Envelope Films on Thermal Properties of Vacuum Insulation Panels with Glass Fiber
Study on SH-CCT Diagram and Weldability of S890 Steel
Test Research on Single Point Impact of a Liquid Foundation
Mechanical Properties and Fracture Characteristics of Ultra-Microduplex Structure in High Carbon Steel
Research on Contact Fatigue of Cylindrical Gear
Effect of Cold Reduction Ratio on Deep-Drawing Performance of High Strength Ti-Nb-If Steel Sheets
Stability Study on Perforated Columns in Steel Storage Racks under Axial Compression
The Microstructure and Creep Strength of 403Nb Martensitic Heat-Resistant Steel
EBSD Characteristics of HSLA100 Steel Quenched in the 2-Phase Region
The Influence of the Residual Mg Content in the Ductile Cast Iron on the Formation Law of Spherodial Graphite
Research on Effect of Temperature on Nitrogen Solubility in Steel
Based on Grey Prediction and Fuzzy PID Control Method
UG and VERICUT-Based Processing of Special-Shaped Stone Samples
Relationships between Phase Transformation and the Crack Formation in Continuous Casting Slabs
A Comprehensive Utilization of Laterite Nickel Ore
Microstructure and Property Control of Hot Rolled DP600 Steel
Effect of Heat Treatment on Microstructure and Mechanical Properties of 800MPa Grade Ultra Low Carbon Bainite Steel
Microstructure and Texture Evolution of Strip Casting Fe-6.2wt%Si Steel
Performance Characteristics of the Steels for High-Rise Buildings
Development of Processing Maps for Coiled Tubing Steel
A Modified Method of Life Analysis Based on Unascertained Theory
A Study of the Inhibition of Iron Corrosion by Glutamic Acid Derivatives Self-Assembled Films
Research on Microwave Carbon-Thermal Reduction of the Preparation Concentrate of Coarse Niobium
The Effect of Bainitic Transformation on Martensite Start Temperature of a Fe-C-Mn-Si Alloy
Chapter 4: Ceramic
Developing the Crystalline Structures and Dielectric Properties of Excess Bi2O3-Added 0.95(Na0.5Bi0.5)TiO3-0.05BaTiO3 Ceramics
Development of a Phenomenological Method for Description of Crack Initiation Behavior under Thermo-Mechanical Fatigue Loading
Backpressure of Three-Dimensional Reticulated Structure Silicon Carbide Ceramics Foam Filter
Effects of BN Dopant on Electrical Characteristics of Barium-Excessive BaTiO3 Ceramics for Laminated Positive Temperature Coefficient Thermistors Fabricated by Tape Casting Technique
Effect of Ni Electrode on the Characteristics of BaTiO3 Based PTCR Ceramics
Fabrication of Lead-Free and High Tc Positive Temperature Coefficient of Resistivity Ceramics Sintered in Air
Influence of Sintering Temperature on the Properties of Porous Quartz Ceramics via the Atmospheric Pressure Sintering Method
Dielectric and Ferroelectric Properties of (K0.5Na0.5)(Nb1 xVx)O3 Ceramics
Study on Low-Temperature Fast-Firing CuO-MnO2-TiO2-NiO with Oxidizing Flame in the Preparation Process of Metallic Lustre Artistic Glaze Optimization
Synthesis, Thermal Expansion Properties and Raman Spectroscopic Study of Ca1-xSrxZr4P6O24 Ceramics
Temperature Field of Single-Well Aquifer Thermal Energy Storage in Sanhejian Coal Mine
The Influence of Ba-Ti Ratio on the Electrical Properties and Microstructures of the BaM-0.007Sm0.007TiO3 Based Ceramics Fired in Reducing Atmosphere
Preparation of Porous Lightweight Ceramics and Fibre Joining Materials
Effect of Fe2O3 Dopant on Electronic Densities and Electrical Properties of ZnO-Based Varistors
Temperature Stable Bi1.3Yb0.7O3-BaTiO3 Relaxor Ferroelectric
Effect of Bi2O3 Addition on the Physical and Electrical Properties of Lead-Free (Na0.5Bi0.5)TiO3-Ba(Sn0.08Ti0.92)O3 Ceramics
The Evaluation of Wheelchair Comfort Based on Analytic Hierarchy Process
Influence of CeO2 Nanopowder on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic Materials
The Influences of NaNbO3 on the Dielectric and Structure Characteristics of (1-X) (Na0.5Bi0.5)TiO3-x NaNbO3 Ceramics
Study on Microstructure of ZnO Lighting Arrester with High Voltage Gradient
Influence of La2O3 Nanopowder on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic Materials
Effect of La2O3 Addition on the Microstructure and Electrical Properties of Copper-Nickel Manganese Thermistors
Chapter 5: Metal Alloy Materials
Fracture Behavior and Microstructure of 60Si2MnA Spring Steels Modified by V-Nb Inoculants
The Effects of Rolling and Annealing on the High Speed Impact Deformation Behavior of Mg-3%Li-1%Ce Alloy
Plasticity and Fracture Mechanism of Refine-Grain AZ31 Magnesium Alloys Sheet
Thermal Characterization of Polyurethane from Castor Oil Reinforced Sugarcane Straw Composites
Effect of Solid Solution on the Microstructure and Performance of Nuclear Power Slot Wedge Copper Alloy
Electromechanical Analysis of a Beam Piezoelectric Transducer Energy Harvest Device
Titanium Boride in High Nb Containing TiAl Alloy: Morphology and Effect on Mechanical Properties
Study on Nitridation Behavior of Mg-Ca Alloy under Nitrogen
Influence of Nb and Sn on d Electrons of TiAl Alloys Studied by Coincidence Positron Annihilation Spectroscopy
Microstructural Formation in Novel Co-Base ODS Alloys Produced by Mechanical Alloying
Effect of Tool pin Profile and Axial Force on Tensile Behavior in Friction Stir Welding of Dissimilar Aluminum Alloys
Constitutive Equation of an Al-12.7Si-0.7Mg Alloy in Superplastic Deformation
Preparation and Mechanical Properties of a Bulk Icosahedral Quasicrystalline Ti-Zr-Sc-Ni Alloy
Tensile Properties of Hot Extruded Mg-Zn-Nd-Y-Zr Alloy at Elevated Temperatures
Application of Benzyl Ester of Modified Vegetable Oils as Rubber Processing Oils
Phase-Field Model for Spinodal Decomposition of Dilute Solute Field in Al-Ag Alloy
Research on the Shrinkage Cavity and Broken Graphite Mold Core of Copper Alloy in Horizontal Continuous Casting
In Vitro Bioactivity of a Biocomposite Fabricated from Ti and Mg Powders by Powder Metallurgy Method
Effect of Different Aging Temperatures on Interfacial Reaction between SAC305 and ENEPIG Surface Finish
Influence of Combined Processes between Gas Soft Nitriding and Carburizing to Hardness of Low Carbon Steel
The Discovery and Preliminary Analysis of an Ancient Kiln Site near Cao Village in Linzhang Town of Hebei Province
Synthesis and Characterization of Siloxane-Modified Polyurethane Dispersion/Clay Nanocomposites
Circumferences Lead to Enhancements of Nonresonant Third-Order Susceptibilities for Carbon Nanotube Bundles
Chapter 6: Biomaterials
Preparation and Characterization of the Lignocellulose Aerogel
The Research on the Interfacial Adhesion of Polypropylene-Magesium Hydroxide Composite Modified by Different Compatibilizers
Quantitatively Ca3SiO5 Particles Adherence Affected the Teeth Enamel Remineralization
Measure of the Photosynthetic Efficiency of the Ficus Altissima Leaves by Using Photo-Acoustic Tomography Spectroscopy Technology
Preparation of MIP Microspheres by Precipitation Polymerization with 1-Phenyl-1-Propanol as Template
Preparation of Starch/PS-g-MAH Blends and Effect on Controlled Release of Herbicide
Contact Analysis of Prosthetic Knee Joint Using ANSYS
Quick Cultivation of Micro-Aerobic Granular Sludge for Simultaneous Nitrogen Removal
The Green Design of Modern High-Rise Office Building Internal Space
Preparation of Phenol-Formaldehyde Foams Using Fulvic Acid
Evaluation of Tribological Performance of PTFE Composite Filled with Rare Earth Treated Potassium Titanate Whiskers
Application of Biodegradable Polymers on Hydroseeding
Effect of the Starting NCO/OH Molar Ratio on the Structure and Properties of Polyurethane
Comparative Analysis on Chemical Composition and Charcoal Characterization of Two Miscanthus Species
Preparation of Salt-Resistance Superabsobent Microspheres by Inverse Suspension Polymerization
Study of Self-Assembled Monolayers of Stearic Acid on Pure Magnesium Surface
Chapter 7: Optical/Electronic/Magnetic Materials
A Theoretical Study on Photosensitizers of Solar-Energy Cell: Transition Metal Carboxyphthalocyanine Complexes
Fabrication and Thermoelectric Properties of Magneli Phases by Adding Ti into TiO2
Irradiation Damage of Electron-Beam on High-Power AlInGaP Red LED
Theoretical Energy Distributions of Electrons from a Large Exponential-Doping GaAs Photocathode
The Study of Thermal Effect in Liquid Crystal Director
Study on the Synthesis and Application of THPS-OMMT-MDFP Nanocomposite Flame Retardant
A Study on Step-Like Magnetization Curves in Tb3Ga5O12 at Low Temperature
Fluorescent Carbon Dots (CDs) as a pH Sensor
Effect of Annealing Temperature on the Properties of Silicon Crystal
Characteristics of Two-Stage -Gate on AlGaAs/InGaAs/AlGaAs DH-HEMTs by Using AlGaAs/InGaP Etching-Stop Layers
Preparation of Y4MgSi3O13:Tb3+,Ce3+ Green Emitting Phosphor for White Light Emitting Diodes and its Luminescence Study
Experimental Verification of Circuit Analog of Three- and Four-Level Electromagnetically Induced Transparency
A New Method to Measure the Absorption Coefficient of the Automotive Driving Room Based on the Sound Pressure Delaying
Optical Study of Poly (9,9-Dioctylfluorene) Isolated by AIB2OB3 Flat Rafts
Organic Light Emitting Diodes with Metallocene Compounds as Cathode Interfacial Layers
Synthesis and Properties of Spirosilafluorene Oligomer
2.1 m Room Temperature Continuous Waves Operation of InGaAsSb-AlGaAsSb Double-Quantum Well Laser
The Enhanced Saturation Magnetization of Nanocrystalline (Ni0.5Zn0.5)1-xCoxFe2O4 Ferrite
Second-Harmonic Generation of the Chalcogenide Amorphous Film by Electron Beam Irradiation
Synthesis and Photoluminescence Property of Tris(8-hydroxyquinoline) Bismuth Rod-Like Structures at Room Temperature
The Fluorescent and Photovoltaic Properties of Meso-Teraphenyl Porphyrins with Different Substituents
Heat Transfer Coefficient Prediction by FEM in the Hot Strip Rolling
Effect of Two Diferrent Mesogens on Liquid-Crystalline Properties of Chiral Side-Chain Liquid-Crystalline Polysiloxanes
Microwave Absorption Performance of La0.7 Sr0.3 MnO3 with Different Sintering Temperatures
The Time Response of Exponential Doping NEA InGaAs Photocathode Applied to near Infrared Streak Cameras
Tunable Magnetism and Half-Metallic Stability of Half-Heusler Compound NiMn1-xNbxSb
Chapter 8: Building Materials
UV Ageing Test and EIS Study of Fluorocarbon Resin Coatings on Galvanized Sheet
Application the Thermomechanical Damage Modeling Approach with Generalized Non-Linear Strength Theory
Experimental Study on the Effect of Steel-Tube Replacement Ratio on the Eccentric Compression Bearing Capacity of Composite Column
Difference between the Measured and Theoretical Value and Theirs Influencing Factors for Heat Transfer Coefficient of Exterior Wall External Insulation
Ground Adaptability Characterization for Digging in Complex Geotechnical Conditions and Risk Mitigation
Study on Conductive Mechanism of Carbon Fiber Filled Cement-Based Composites
Damage Model for Dissipative Materials with Generalized Non-Linear Strength Theory
Synthesis, Crystal Structure and Spectroscopy of Dibutyl Ester-Ether Fluorescein
Synthesis and Surface Properties of a Novel Switchable Bolaform Surfactant
First-Principles Study on Mechanical Properties of IVB-Group Transition-Metal Nitrides TiN, ZrN, and HfN
Characteristics and Applications of the AAm-Grafting PE
Study on the Performance Influencing Factor of Epoxy Asphalt Waterproof Cohesive Layer in Steel Deck Pavement
Influence of Calcination Temperature on Activity of Hydration Properties of Gangue
Adhesion Mechanism Analysis of Prepainted Steel Sheet at UV Ageing Test
Effect of Carbon Fiber Gradient Distribution on Heat Property of Electrically Conductive Cement Mortar
Study of Ground Lateral Flow on Piles Foundation due to Soil Liquefaction
Phase Field Model for Influence of Edge Dislocation on Precipitation
Research on Solid Wastes of Gangue, Slag, Fly Ash Used as Cement Composite Mixing Materials
The Use of Residual Rice Husk Ash from Thermal Power Plant as Cement Replacement Material in Producing Self-Compacting Concrete
Improvement of Resistance of Concrete Against Chloride Ingression Using a New Admixture
Study on the Workability of Self-Compacting Lightweight Aggregate Concrete with Orthogonal Experiment Method
Preparation and Performance Investigation of Phenolic Foam
Wavelet-Based Denoising of Vibration Signals for Tool-Edge Wear Detection in High Speed Machining of Inconel 718
Study on Relationship between Structural Parameter and Performance of Gas-Solid Separator
The Experimental Studies on Self-Heat Conserving Facade Panel with Waste Fibers
Effects of Pebble Aggregate in Xinjiang Area on Concrete Performance
Performance of Asphalt Mixture Used for Asphalt Treated Base of Perpetual Pavements
Effect of Differential Speed Rolling on Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Sheets
Research on Fractal Characteristics of Cement-Based Materials by Nitrogen Adsorption Method
Under Uniaxial Compression of Rock Specimens of Two Cracking of Shear Failure Mode Analysis
Chapter 9: New Energy Materials and Environmental Materials
Screening of Yeast with High-Yield Single Cell Protein and Preliminary Optimization of its Culture Codition
Improved the Physical and Electrochemical Hydrogen Storage Kinetics of Mg2Ni-Type Alloys by Substituting Ni with Co and Melt Spinning
Green Energy Anode Materials: Pyrolytic Carbons Derived from Peanut Shells for Lithium Ion Batteries
In Situ Quaternized Gel Electrolyte for Quasi-Solid-State Dye-Sensitized Solar Cell
Preparation and Coagulation Performance of Poly Silicate Aluminium Ferric Boron (PSAFB)
Preparation and Photoelectric Properties of Spinel MCr2O4 (M = Cu, Ni) Nanopowders
Thermodynamics of Phenol Adsorption onto Activated Carbon Fiber
Enhanced Electrochemical Cycle Stability of RE-Mg-Ni System A2B7-Type Alloys by Melt Spinning and Substituting La with Pr
Performance Enhancement of Organic Solar Cells with the LiF/Al Cathode Structure by the Pyromellitic Dianhydride Layer
Improvement of the Properties of CuInS2 Thin Film Prepared in Sulfate System
Thermoelectric Properties of BaxCo4Sb12 Prepared by High Pressure and High Temperature
Preparation and Properties of Corn Gluten Meal/Poly (Lactic Acid) Composite
Starch-Chitosan Blend Films Prepared by Glutaraldehyde Cross-Linking
Study on the Effect of Carboxyl Bagasse Hemicellulose on Heavy Metal Adsorption
Numerical Simulation and Optimization on Casting Process of Mould Clamping Board Using a Nodular Cast Iron
Theoretical Study of the Effect of Ca Doping on the Electronic Properties of LiCoO2
Study on Diffusion of Copper of SOFC Cu-Based Anodes in Co-Sintering with Electrolyte
Control of Surface Quality of if Steel Sheet
Study on the Performance of the Modified Single Base Gun Propellant
Immobilization of Cadmium and Lead in Contaminated Soils by Different Amendments
Preparation of Cationic Rice Husk Flocculant and its Flocculating Characteristics
Preparation and Performances of Amino-SiO2 Filled Cellulose Film
Decolorization of Coking Wastewater by Mineral Adsorbents
Phase and Electrical Properties of [Li0.065(Na0.535K0.48)0.95]NbO3 Lead-Free Piezoelectric Ceramics Sintered at Low Temperature
An Investigation on the Electrochemical Cycle Stability of La0.75 xZrxMg0.25Ni3.2Co0.2Al0.1 (x = 0-0.2) Alloys Prepared by Melt Spinning
Electrochemical Performance of LiFePO4/C Positive-Electrode Material Prepared via a Rheological Phase Method
Comparison Proximate Analysis and Heating Value between Cassava Rhizome and Perennial Wood
Experimental Research on Hydrogen Storage Characteristics of TBAB Hydrates
Experimental Study on the Optimal Thickness of Infiltration Media of the CRI System
Enhanced Gaseous Hydrogen Storage Kinetics of Mg2Ni-Type Alloys by Melt Spinning and Substituting Ni with Cu
Preparation and Performance of Controlled-Release Tablets of Sasanquasaponin
Capillary Adsorption of Nanostructure Carbonic Materials for Nitrobenzene in Wastewater
Synthesis of Al-Doped Lithium Manganese Oxide from Al2O3-Li2CO3-MnO2 Ternary System
Research of Poly (Ethylene Terephthalate) Modified by Calcium Lignosulfonate
Control Technology of Internal Quality for CC Billet
Comparative Experiment Study on the Total Phosphorus Removal Efficiency of Different Infiltration Media Combinations in the CRI System
Study on the Influence Factors of Desilication in Bioleaching by B. Mucilaginosus
A New Interwell Tracer Technology - Particle Tracer Technology
Discussion on Pavement Recycling Techniques in China
Vertically Aligned CuInS2 Nanorod Arrays Prepared by Sulfurization Method with Porous Alumina Template
Preparation and Application of <110> Dislocation-Free Monocrystalline Silicon by CZ Method
Preparation of Nanosize Anatase TiO2 by a Simple, Low-Cost Method and their Performance in Dye Sensitized Solar Cells
Chapter 10: Biomaterials and Chemical Materials
ZM Solid Catalysts for Synthesis of 1-Butoxy-2-Propanol with High Selectivity
Synthesis and Properties of a New Gemini Surfactant with Amide Group as Spacer
The Transdermal Absorption Study of Human-Like Collagen
Eco-Material Applied on the Interior Wall Decoration
Synthesis and Characterization of Polyimides Derived from 5-Amino-2(p-aminophenyl) Benzoxazole Monomer
Preparation and Adsorption Properties of Gelatin Microspheres for Cationic Dye
The Recent Advance of Molecularly Imprinted on-Line Solid Phase Extraction and its Application in Sample Pretreatment - A Mini Review
New Synthesis Method of the Lamellar Zinc Phosphate and its Electrochemical Corrosion Inhibitions
Preparation and Characterization of Silk Fibroin/Hydroxyapatite Bilayer Scaffolds
Microstructural Modifications in Electron Beam Irradiated Poly(ethylene terephthalate) Fibrics
Design and Synthesis of PEG Curcumin Monomer for the Comb-Like Polymer Prodrug
The Synthesis and Properties of 3-(2'-Benzothiazolyl)coumarin Fluorescent Dyes for Polyester Fabrics
Long-Chain Organofunctional Silanes: Synthesis and Surface Derivatization
The Biocompatibility and Bioactivity of Gradient Composite Bioceramic Coating with Different Content of Nd2O3 Fabricated by Wide Band Laser Cladding
The Application of High Pressure Electrostatic in Microcapsule Preparation
Application of Ultrasonic Wave in Dyeing of Feather Fibers
The Synthesis and Characterization of Nadic Dialkyl-Ester Derivatives with Trialkyl Borate
Chapter 11: Thin Films
The Influences of Annealing Temperatures on the Properties of the Sol-Gel Deposition SrBi4Ti4O15 Thin Films
Simulation of the Effect of Power on the Properties of Si-Based Films Deposited by PECVD
Residual Stress and Dielectric Property of Al2O3 Films on N-Type Si-(100) Substrate
Effects of Deposition Parameters and Annealing Temperatures on the Characteristics of the Sr0.6Ba0.4Nb2O6 Thin Films
Effects of Deposition Temperatures on ZnO:Al Films Deposited on Polymer Substrates by RF Magnetron Sputtering
Effects of RF Power on Crystallinity Properties of ZnO Films Deposited by Helicon Wave Plasma Assisted Sputtering
Organic Plasma-Polymer Thin Film Coatings on Super-Hydrophilic Coated Surface for Increasing the Surface Durability against Scratch without Changing of Surface Wettability
Effect of Nonstoichiometric Pb Content on the Properties of PZT Ceramics
Thickness Effect on Spin Moment in Amorphous Co0.9Fe0.1 Films
Effect of Neodymium Salt in the Anodization of Aluminum in Sulphuric Acid
Study on a New Method to Produce NiTi Thin Film
Effect of Cryogenic Treatment on Improving the Fracture Toughness of TiN Coated Cemented Carbide
Effect of Microstructure on the Corrosion Behavior of TiN Coatings
The Effects of Substrate Material and Surface Roughness on the Structure of SnO2 Films
Studying on Thickness Control of ITO Films Deposited Using RF Magnetron Sputtering
Impedance Spectroscopy Analysis of p Type Li Doped ZnO Thin Film Effect
Preparation of FePt Film via Electrochemical Deposition Method
Corrosion Behavior of CrN/AlSiN Multilayer Coatings on AISI 304 Stainless Steel in Aluminum Alloy Melt
Fabrication of TiO2/Cu Composite Photocatalyst Thin Film by 2-Step Mechanical Coating Technique and its Photocatalytic Activity
High Saturation Magnetization Fe-Co-N Thin Film Deposited by Facing-Target Direct Current Magnetron Sputtering
Effects of the Substrates Temperatue and Argon Oxygen Ratio on ZnO Thin Films
Resistivity Control in Unintentionally Doped GaN Films Grown on Si (111) Substrates by MOCVD
XPS Study on Barium Strontium Titanate (BST) Thin Films Etching in SF6/Ar Plasma
Design and Synthesis of DLC Films with Different sp3/sp2 Ratios by Middle Frequency Magnetron Sputtering
Chapter 12: New Functional Materials
Tunneling Properties in GaAs/Al0.33Ga0.67As/InxGa1-xAs Double-Barrier Resonant Tunneling Structures
Study on TlBr Single Crystal Growth Using Improved Electro Dynamic Gradient Method
Piezoelectric and Dielectric Properties of MnO2-Modified Bi(Mg1/2Ti1/2)O3-PbTiO3
Effect of Hetero-Interfaces on Rashba Spin-Orbit Coupling in a Gated In0.53Ga0.47As/InP Quantum Well Structure
The Synthesis, Characterization and Photocatalytic Property of K2La2Ti3O10
Effect of Vitreous Fluid Temperature on Fiber Diameter and Surface Topography of Glass Wool by Centrifugal-Spinneret-Blow Process
Low-Frequency Damping Behavior of Porous Magnesium
Study on Microstructure and Electrical Properties of ZnO Varistor Ceramics
The Research Situation and Development Trend of Energy Saving Phase Change Materials
Studies on Dynamic Adsorption and Desorption of Total Flavonoids with Ion-Exchange Fiber
Effect of Al Ions on Adsorption Efficiency of Mesoporous Organosilica for Water Treatment
Waterborne Polyurethane: Effect of Functional Groups in Aromatic Isocyanate and the Chain Length of Hydroxyl Terminated Natural Rubber
Photoelectrochemical Biofuel Cell Using Triarylamine Dye-Sensitized Titanium Dioxide Film as Photoanode
Dynamic Analysis and Simulation of Variable Topology Parallel Tire Building Drum Mechanism
Synthesis and Characterization of Mn Doped ZnO Nanorod Arrays
Corrosion Resistance Mechanism of MgO-ZrO2 Brick in RH Degasser Slag
Metallographic Study of Laser Thermal Fatigue Damage on Piston
Effect of Ce Addition on the Microstructures and Mechanical Properties of a Ni-Co-Based Superalloy
Effect of Packaging Materials and Process on the White LED Fabricated with Quantum Dots
Study on the Anti- Corrosion Properties of Organic and Inorganic Inhibitor by Electrochemical Treatment in Aqueous Solution
Study on the Development of a Thin-Film Corrosion Sensor for the Monitoring of Cl Ion Penetration into Cementitious Materials
Study on FCAW Semi-Automatic Welding Procedure of Girth Weld Joint of Line Pipes
Chapter 13: Materials and Design
Experimental Research on Explosion-Protection Performance of Porous Meshy Aluminum Alloy Material
The Parameter Influence of Electron Beam Irradiation on GaN Based Blue LED
Influence on Structure and Composition of Carbon Supported PtCu-LaOx Composite Membrane Electrode by Acid Treatment
Deformation Effects on Metal Magnetic Memory in API 5L X70 Steel
A New Extensional Viscosity Model Based on the Cross Model for Polymer Fluids
A Research on Static and Dynamic Fracture-Resistance of Welding Parts of Coolant Piping Material
Hyperelastic Model Selection of Tissue Mimicking Phantom Undergoing Large Deformation and Finite Element Modeling for Elastic and Hyperelastic Material Properties
Analysis on the Influence Factors of Casing Collapse Resistance Strength
Study on the Safety Assessment System of Fire Hazard in Coal Mine
Study the Non-Linear Heat-Elasto-Plastic Constitutive Relation
Grain Boundary Relaxation in a Fe-Cr-Al Alloy
Effect of Loads on the Wear Properties of La2O3-MoSi2 Composite against SiC at Elevated Temperature
Effect of Moisture Absorption on the Residual Strength after Bending Fatigue of CFRP
Failure Analysis of Automobile Redirector
Nonlinear Vibration of a Cantilever FGM Rectangular Plate with Piezoelectric Layers Based on Third-Order Plate Theory
Measure of the Optical and Electrical Properties of Semiconductor SiO2 Nano-Crystalline by Using Photo-Acoustic Technology
Experiment Study on Aviation Kerosene's Flash Point Temperature of Low Pressure Environment
Study of Screw Loosening in Abutment Subject to Occlusal Loading
Iterative Perturbation Methods for Isolation Structure Dynamic Model Responses Calculation with Non-Classical Damping and its Correlation Analysis
Enthalpy Relaxation during Non-Isothermal Crystallization from the Melt of Polymer: For IPP as Example
The Effect of Thai Compost on Biodegradability of Polylactic Acid Based on ISO 14855-2 Method
Study on Tribological Behavior and Mechanisms of Weldox960 Steel
Application of Shape Memory Alloy Actuators to Control the Displacement of an Adaptive Beam
Study on the Dynamic Radial Tensile Test Method of Thin-Walled Tube Structure with Special Ring Section
Analysis on Crystal Structure of 7A-Halloysite
Use of Impact Testing to Assess the Softness of Bedding Materials
A Study on the Fatigue Life Prediction for Bending Pipe
Failure Analysis of the Stuffing Box in a Super High Pressure Compressor
Compression after Impact Performance of Composite Stiffened Panels
Effect of Vacuum Thermal Cycling on Mechanical and Physical Properties of an Epoxy Matrix Composite
Mixed-Mode Bending Test for Fracture Toughness of Composite Bonding Adhesive Layer
Experimental Investigation of Tensile Properties and Fracture Mechanism of WCP/Cu Composites Reinforced with Different WCP Volume Fraction
Improved Properties of CENR/PP Blends by Using Compatibilizers for Promoting the Interfacial Adhesion between Phases
Evaporation Characteristics of Ammonium Formate-Urea-Water Solution Droplet for SCR Systems
A Study on the Structural Design and Sensing Performance of Conductive Woven Fabric Embedding CCFs
Degradation Behavior of Tungsten in Molten Aluminum
Nonlinear Constitutive Equation and Elastic Constant of Rubber Material
Mechanism and Effect of Electrochemical Modification on Physicochemical Soft Rock
The Compaoparison of Characteristics of Fracture Toughness of Materials for Nuclear Piping by Use of Various Types of Specimens
High-Pressure Electronic and Optical Properties of -Si3N4
Corrosion Behavior of Drilling Pipe Steels for High Sour Gas Field
Fatigue Crack Propagation Simulation of Rubber Shock Absorbers
Analysis of Collisions of Vehicle and Concrete Barrier on Rural Highways
Effect of Moisture Absorption on the Bending Fatigue Performance of Carbon/Epoxy Laminates
Design of a Kind of Small Sample and Determination of Initial Tensile Stress for Implant Test
Experimental Observation on the Uniaxial Cyclic Deformation Behaviour of TA16 Titanium Alloy
Modeling of Hydrogen Weight Storage Capacity in Solid Porous Silicon
Aircraft Three-Proof Index System Establishment and Evaluation Method Study
A Comparative Study of the Effect of Crosslink Agents and Chemical Modification on Properties of Natural Rubber Vulcanizates
Experimental Analysis of Aluminum Alloy Section Bars and their Mortise and Tenon Joints under Bending Load
Preparation and Performance Testing of Tubular Cathode Support for Direct Ethanol Fuel Cell
by "Nielsen BookData"