Advanced research on engineering materials, energy, management and control : selected, peer reviewed papers from the 2012 Second International Conference on Engineering Materials, Energy, Management and Control (MEMC2012), March 17-18, 2012, Wuhan, China

Author(s)

    • International Conference on Engineering Materials, Energy, Management and Control
    • Zhang, Helen
    • Jin, David

Bibliographic Information

Advanced research on engineering materials, energy, management and control : selected, peer reviewed papers from the 2012 Second International Conference on Engineering Materials, Energy, Management and Control (MEMC2012), March 17-18, 2012, Wuhan, China

edited by Helen Zhang and David Jin

(Advanced materials research, v. 424-425)

Trans Tech Publications, c2012

  • : [set]
  • Part 1
  • Part 2

Available at  / 1 libraries

Search this Book/Journal

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). In these proceedings are to be found original ideas and new angles on aspects of Engineering Materials, Energy Management and Control. They are the result of a forum where researchers could exchange their innovative ideas from new viewpoints. These proceedings will provide valuable guidance to scientists, physicists, chemists, teachers and others, world-wide.

Table of Contents

Preface and Committee Chapter 1: Engineering Materials, Energy Science and Dynamic System in Mechanical Engineering A Numerical Simulation of Surface Deformation due to Ore Drawing Perturbation Performance Investigate of Fine Aggregate Size and Content on Asphalt Mastic Description of Process Automation System for the Plate Mill Shearing Line Fluorescent Properties of Mg (II) Complex with 1-Acetyl-2-Naphthol-4, 4'-Diaminodiphenylmethane Application of Dynamic and Reusable Report Generation System in Urban Environmental Remote Sensing Monitoring Hydrothermal Synthesis and Luminescent Characterization of Zn (II) Complex with 1,4-Bis(2'-formylphenyl)-1,4-dioxabutane Isonicotinoylhydrazone Wavelet Analysis on Vibration Signal during Unsteady Process Synthesis and Photoluminescent Properties of 1-Acetyl-2-naphthol -4, 4'-diaminodiphenylmethane and its Cd (II) Complex Design of Industrial LCD Terminal System for Intelligent Image Display Key Anti-Friction Technology Breakthrough in Steel Collars: First Using Electro Slag Remelting in the Second Remelting of HSS Collars Evaluation of Liuli Expressway Landscape Quality Based on Rough Set Theory Traditional Chinese Medicine Epimedium Release from PLGA/HA Scaffolds Prepared in Supercritical CO2 Optimizing Build Parameters for Integral Stereolithography System Research on Warning Model about Drug Shortage in Hospital Based on RS-SVM Application of Electrohydrodynamic Drying Technology in Sludge Effects of Initiator and Catalyst on Properties of Dental Zirconia-Toughened Alumina Ceramic Base Crown Prepared by Gelcasting The Research of Dynamic Path Planning Based on Improving Fuzzy Genetic Algorithm in the Vehicle Navigation Effect of Eutectic Reaction Induced by La on Microstructure in Semisolid A356 Alloy Learning Machine Design for Mechanic Fault Diagnosis Expert System Hydroxyapatite-Carbon Nanotubes Composite Coatings on Ti Substrate The Finite Element Analysis and Topology Optimization of Semi-Trailer Frame The Thinking on Premise of Constructing the System of Carbon Finance in Heilongjiang Province Remote Monitoring System for Aquaculture Based on Ethernet Summary of Carbon Sequestration Methods The Features of Multiscale Pseudoframes and Gabor Frames According to Bivariate Filter Functions Study on Mechanism of Separate Type Boundary Lubrication in Low Frequency Torsional Vibration Tapping Research of a ZVZCS Full-Bridge PWM DC/DC Converter Based on Parallel Current-Mode Control Partner Choice of Iron and Steel Logistics Alliance Based on Fuzzy Analytic Hierarchy Process A Portable JPEG Image Application System Base on SOPC Technology On the Basis of Forest Volume Expansion Method to Predict the Carbon Sink Potentiality in Daxing'anling Experimental Study on Wear Monitoring of Marine Diesel Engine's Piston Ring by Magnetoresistive Sensor Effect of Replacement of Fe2+ by Co2+ in W-Type Hexagonal Ferrite BaFe18O27 to its Electronic Properties from First Principles Culture Conditions Optimization of Hyaluronic Acid Production Based on GP and QPSO Algorithms Modeling the Spread of Electric Vehicles Based on Life-Cycle Cost Video Image Segmentation and Understanding Electron Spin Relaxation in Semiconductor Quantum Wells Simulation and Research of Heating Load about Residential Construction Based on Zhengzhou Design and Implementation of a File Transfer System Based on .NET Remoting Hardware Design of Precision Injection Molding Machine Temperature Control Circuit Modeling and Simulation of a Grid with a Doubly Fed Induction Generator Hybrid Evolution Strategies Algorithm Based on Dynamic Demes Literature Review of the Domestic Research on Emission Trade Analysis of Necessity of the Acceleration of Solid Waste Management in China in "Twelfth Five-Year Plan" Period and Suggestions Application Research of Information Technology in Vehicle Study on Product Design Management based on Product Resources Methods of Shoes Style Creation Design Based on the Supply Chain Integrator for the High-End Logistics System of Dangerous Goods The Analysis of the Influence of Highway Construction and Operation on Industrial Structure Adjustment in Heilongjiang Province - Co-Integration Test and Causality Test Based on Data from 1995 to 2009 The Quest into China Engineering Materials Personnel Training Mode Chapter 2: Energy Materials and Mechanical Engineering Application The Relationship between Freeway Safety and Geometric Design Elements Optimization Research on Cyclic Waterflooding in Low Permeability Fractured Reservoir A Novel Fusion Algorithm of Visible Image and Infrared Image Based on NSCT Traffic Throttling to Improve TCP Incast Throughput Mine Gas Wireless Monitoring and Forecasting Network Based on Support Vector Machine Design of Multi-Sensor Communication System of Wheelchair Robot Base on the CANopen Analysis to Effective Elastic Modulus and Porosity for Artificial Bone Scaffold with Hydroxyapatite Microspheres Protein Folding Simulation Based on Improved Simulated Annealing Algorithm Modeling and Analysis of Metabolism Process with Finite State Machine Parametric Modeling of Five Typical Cylindrical Shells Research and Design on the High-Voltage Line Harmonic Detection Based on a New Method The DGPS Maximum Speed Prediction Based on AR Model in Full-Scale Speed and Power Trial Parametric Modeling of Six Typical Reticulated Dome Effect of Ambient Temperature on Three-Shaft Gas Turbine Performance under Different Control Strategy Modeling, Simulation and Analysis of Mechanical Ruling of Echelle Grating Analysis on Vibration Conductivity in Walls of Hydropower House Based on Power Flow Theory Feature Extraction of Acoustic Emission Signals for Rotor Fault Based on Daubechies Wavelet Analysis Simulation and Analysis of Deep Excavation and Loading by Using FLAC3D Optimum Design of a Parabolic Flexure Hinge Based on Compliance Closed-Form Equations A Wavelet-Based Watermarking Algorithm Using the Human Visual System A Method of License Plate Chinese Character Recognition Based on Image Quality Application of SLP in Plant Layout Based on Low Carbon Logistics Chaos, Sliding Mode Control between Two Different Fractional-Order Hyperchaotic Systems with Uncertain Parameters Shape Optimizing Design of Kiewiti Spherical Reticulated Shell Study on Carrying out Kanban Production System in a Engine Assembly Workshop Optimal Design of Basic Parameter of Disconnected Steering Trapezoid Evaluation of Rolling Bearing Vibration Using Fuzzy Set Theory and Chaos Theory Kolmogorov Entropy Optimization in the Aeroengine Health Monitoring Application of the Regularization Chaos Prediction Model in Aero-Engine Performance Parameters Frequency Balance Influence to Signal-to-Noise Ratio of Bistable Stochastic Resonance in Signal Smart Regression Recognition Procedure Calculation and Analysis Techniques of Foundation Pit Engineering Based on FLAC3D Study on the Network System of City Earthquake Prevention and Emergency Centers with the Community Public Facilities as the Nodes Mathematical Relationship between Solar Radiation Intensity and Exterior Wall Temperature Motion Trajectory Planning of 3-Dof Wire-Driven Parallel Robot The Design and Calculation of an Underwater Carrier's Hood Separation An Inverse Problem of Eigenvalue for Generalized Anti-Tridiagonal Matrices Distributed Fieldbus Technology for Generator Excitation System Data Storage Design Rotor Current Method of Directional Control of Doubly-Fed Motor Without Speed Sensor Based on Vector Control Environmental Risk Assessment of General Contractor's EPC Project Train Monitoring System Design Based on ARM-Linux Embedded Syetem Construction of Luciferase Reporter Plasmid with Human AQP1 Gene Promoter Quantitative Study on the Relation between Water Disaster and Grain Production of Hubei Province New Nash Equilibrium Based on Generic Risk Element Transmission Theory Application of Fuzzy Closeness in Siberian Tiger Skin Texture Recognition The Metabolic Capabilities of Two Cells in Enterobacteria An Anti-Jamming Algorithm of SDM Based on the Cyclostationarity of the Signals Removal of Gas-Phase Elemental Mercury by Photocatalytic with Liquid Absorption Discrete Spatial Solitons in the Two-Dimensional Optical Waveguide Arrays Microscopic Numerical Simulation of Reinforced Concrete Damage Evolution under Uniaxial Tension and Compression Chapter 3: Material Science, Manufacturing Engineering and Production System Tuning Algorithm for Modeling and Controllability of Fractional-Order Control Systems Study on Melt Adhesive Used in Aluminium-Plastics Composite Board Review on Singular-Value-Decomposition-Based Digital Watermarking Algorithm in Combination with Image Features Study on the Firing Table Compiling of a New Type of the Very Low Altitude Interception Device Numerical Study on Double Layers Fragment Warhead under Asymmetrical Initiation The Research on the Calculation Methods and the Influential Factors Analysis of the Mechanical Joint Persistence Ratio of Jointed Rock Mass An Algorithm for Map Coloring Problem Based on Depth First Search Bioinformatics Analysis of the Complete Nucleotide Sequence of the Duck Enteritis Virus (DEV) US2 Gene The Optimization of EB Flatform with Dynamic Cache Bioinformatics Analysis and Characteristics of US2 Protein Encoded by the Newly Identified US2 Gene of Duck Enteritis Virus Framework of 3D Model Manufacturing Features Extraction Technology Common Breakdowns Analysis and Processing Measures on Frequency Inverter Effect of Working Parameters on the Damage of Ladder Impact Drill The Research on Directional Elements of High-Voltage Line Protections Based on Zero-Sequence Reactance of Fault Components Structure Optimization of Large-Diameter Percussive Drill Analysis of Soft Rock Tunnel Mechanics Effects Based on Strain Softening Model of Surrounding Rock Simulation of Design and Optimization of Local Oil Gas Ventilation Equipments with CFX Analysis of Influencing Factors of Coal-Biomass Compound Briquets Combustion Characteristics Optimization Design of Gravity Dam Section Based on PSO Algorithm The Process Modification of Bathing Wastewater Treatment and Reuse System in School Application of Organic Inclusion in Hydrocarbon Exploration Design and Implementation of NIDS String Matching Based on SOPC Analysis of Heat Exchange Efficiency during the Spray Cooling Process Research on the Sensory Quality Evaluation of Agricultural Food Based on Linguistic Information N-Soliton Solutions for (2+1)-Dimensional Nonlinear Dissipative Zabolotskaya-Khokhlov System End Processing of MAEAM Pair Potential for BCC Metals A New Compact Dual-Band Filter Using SIR A Novel Kernel Matrix Isomap Algorithm Based on Partial Least Squares Study on MAEAM Multi-Body Potentials with Farther Neighbor Atoms for HCP Metals Modeling of Arbitrary Power Level PV Array Based on Circuit Equivalent Mechanism The Use of Biotreatment Technology to Dispose of Offshore Drilling Waste Oily Fluids Forklift Hydraulic System Simulation Based on ADAMS Optimization and Validation of an Indirect Competitive ELISA for Detecting Enrofloxacin Residue Dynamic Routing Algorithm Based on HIP Multicast Model Preparation of Artificial Antigen and Immunological Trait for Estradiol The Design and Implementation of Monitoring Data Warehouse of Ambient Air Quality Photocatalytic Activities of HZSM-5 Supported TiO2 in Different Electrolyte Solutions An IoT Anomaly Detection Model Based on Artificial Immunity Analysis and Improvement of Vibration and Noise for Driving Axle Photocatalytic Activity of TiO2 Coated on HZSM-5 Prepared by Oxalic Acid Treatment Prediction and Analysis of Vehicle Cab Interior Noise Based on Structure-Acoustic Coupling Electrochemical Study on S2- to the Surface Passivation Film of T23 Material Used in Supercritical Unit Tubes Investigation of Vibration for Vehicle Rear Axle Based on Modal Analysis Development of the Self-Motion Advanced Hydraulic Support Based on the Virtual Prototype Technology The Analysis of Frame-Shear Wall Structure Model Research on the Performance of the Autoclaved Fly Ash Common Brick A Measurement and Analysis Technique of Curves of Metal Parts Bioinformatics Analysis and Characteristics of UL14 Protein Encoded by UL14 Gene in Duck Enteritis Virus Vascular Contour Extraction of MRS Regional Morphology Algorithm Based on Sobel Operator Analysis of Synonymous Codon Usage in the UL14 Gene of Duck Enteritis Virus Chapter 4: Engineering Material, Energy Science and Dynamic System in Mechanical Engineering Three Layers Optimization Model for Time-of-Use and Interruptible Price Based on Fuel Saving and Emission Reducing A Research Review of the Construction Problem of Dynamic Alliance of Project Oriented Small and Medium-Sized Enterprises Nonlinear Controller Design for Hypersonic Vehicles Based on Dynamic Inversion Considering Flexible States Resource Representation in Migrating Workflow System Modeling Research on Road Signs Recognition Based on Machine Vision Stiffening and End Processing of MAEAM Pair Potential for FCC Metals Overview: Methods of Crack Damage Detection Based on Modal Analysis The Analysis of Wireless Channel in the Workshop of Chemical Water Treatment in Power Plant A Novel Multi-Layer Intelligent Test and Adjustment Technology for Water Injection Well Flow Control Strategy for Novel Layered Synchronous Water Injection Technology in Oilfield Synthesis of Li0.8Zn1.1PO4 and its Selectivity to Li+ Exchange Research on Inverter Fault Detection and Diagnosis Sewage Anti-Blocking Machine Principle and Double-Stage Pump Technology Research on Gas Station Selection Support System with Given Refueling Volume A Fast Image Encryption by Bit-Chaotic-Shuffle Based on Chaotic Systems Laser-Induced Electroless Copper Deposition on Modified Plastic Surface Cost-Effective Energy Recovery Circuit for Plasma Display Analysis on Peeping Image Enhancement of Coal Mine Borehole Based on Wavelet Packet Decomposition Non-Isolated Single-Switch Step Up/Down Converter with Wide Conversion Range Study of an Inorganic Ion Exchanger Li1.2Zn0.9PO4 The Airport Runway Foreign Objects Detection Method Research Based on the Algorithm of SIFT The Synthesis and Ion-Exchange Property of Li+ Memorized Spinel LiZnPO4 Interleaved Synchronous Buck Converter with a Coupled Inductor Speed and Rotor Position Identification for PMSM Based on Improved Nonsingular Terminal Sliding-Mode Operation Mode and Cost Analysis of Pure Electric Vehicle Charging System with Polymer Insulation Materials in China Optical Performance of Horizontal Single-Axis Tracked Solar Panels Study on Slag Entrapment of Molten Steel in Mold with Electromagnetic Stirring Technology A Signal Processing Method for Ground Monitoring System of a Certain Missile's Guidance Module Quality Control and Supervision of Material in Construction Preparation of Microbial Flocculant and its Preliminary Application on Removal of Ammonia in Tannery Effluent Research of Minimum Ship Safety Manning for Trial Wetland Plant Landscape Construction of the Ancient Canal Combining Archaic Rhyme with Wild - Taking China Yangzhou Sanwan Wetland Park as a Case Design of Mould on Cold Rolling for CARB Bearing's Arc Roller The Solar Assisted Ground-Source Heat Pump Heating Applied Research of Cold Regions Diamond Tools Matrix Composites of Co Replaced by Fe with Doping Rare Earth Development and Analysis on Energy Conservation Equipment and Control Technology of HVAC Numerical Study of the Effect of Wall Opening on Wind Pressures on Low-Rise Gable-Roofed Buildings Material's Chemical Reaction Progression Variables Fluctuating and Detailed Equilibrium Principle Kinematic Analysis of Humanoid Based on Screw Theory Enhanced Hydrolysis of Furfural Residues by Trichoderma cellulases with Addition of Natural Surfactant Tea Saponin DTA of Rare-Earth Fe-Based Matrix Composites for Diamond Tools A Design Proposal of Integrated PC-Architecture Embedded Control System for Remotely Operated Weapon Station Improvement of Running Tunnel Based on OSPF TE Design of Internal Control Risk Management System of Coal Mining Enterprises Based on Systems Engineering Research on the Forest Inventory Based on Three Dimentional Laser Scanner Solving the Dynamic Model of Metabolic Network of Escherichia coli by Adams Methods Finite Element Analysis of High Pressure Storage Tank Research of the Sprayed Steel Fiber Concrete Application in Tunnel Construction Research and Exploration of Waste Money Drilling Technology Investigation on Shading Effect of Urban Green Space in Summer in Hangzhou Chapter 5: Environment Research, Dynamic System and Applied Mechanics The Study on Organic Acid Detection Using Lon Chromatography The Application of the Fuzzy-PID in the Circulating Water Control System with Constant Pressure Numerical Simulation of Turbulent Flow for Various Inlet Velocities in Tee Junctions with Periodic Porous Media Intelligent Control Method for Aircraft Deicing Fluidtemperature Based on a New Adaptive Smith Predictor Correction Technology and Development on Active Power Factor Development of Electric Automobiles and Electric Vehicle Charging Facilities in China Synthesis of SrTiO3 Nanoparticles by a Simple Sonochemical Method Characteristics Analysis of Double Chevron-Type Plate Heat Exchanges with Different Corrugation Ratios Research on Environment of Dwellings with Rammed Earth Walls in Deqin Area in Yunnan Province Research Based on Simulink of Hearth Negative Pressure Control System Research on the Weak Signal Detecting Technique for Crop Water Stress Based on Wavelet Denoising Experimental Study on the Characteristics of Modified Ca-Based Sorbents and its Mercury Adsorption Capability in the Flue Gas Research on New Folk Houses with Regional Characteristics and Earth Material Photoelectrocatalytic Oxidation of Methyl Orange in KCI Solution The Measurement Method to Position Coordinates of Movable Platform for a Parallel Machine Tool Influences of Aeration and pH on Activities of HZSM-5 Supported TiO2 GA-CDFM Based Hybrid Optimization Method for Steelmaking Scheduling and Caster Operation Effect of Ultra-High Pressure on the Characterization of Ursolic Acid/ -Cyclodextrin Inclusion Complex Research of the Measurement Technique for the DC Motor Sensorless Control Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper Research on Repeat Compensation Algorithm in the Servo System of CNC Machine Tools Effect of Electron Beam Treatment on the Surface Properties of AZ31B Magnesium Alloy Hydrogen Bell-Type Furnace Control System Based on Multi-Layer System Structure Non-Isolated High Step-up DC-DC Converter with a Coupled Inductor Tire Shredding Delamination Peeling Method Research The Characteristics Research of Spray Evaporative Condenser AMLU Truck Crane Torque Instrument Working Set and Analysis Research on Nonlinear Modeling and Simulation for Flexible Drive Train of Wind Turbine Photoelectrocatalytic Oxidation of Methyl Orange in KNO3 Solution Quality Detection of Punched Sheets with Circle Fitting Based-On Machine Vision Low Power Wi-Fi(IEEE 802.11) for Mobile Sensing of the Internet of Things of Mine Preparation and Analysis of Magnetic Nanoparticles Used as Highly Active Catalysts over a Wide pH Range Application and Research of XML Technology in IETM Optical Navigation Satellite Constellation Design Obstacle Detection System Based on Stereo Vision and a Structured Light The Performance Research of Ceramic Fibers Filtration Composite Material FSSS Technical Retrofit of 130T/H All Gas Fired Boiler Installation Determination Method of the Combined Wind-Storage System Aiming at Smooth Effects Concrete Superplasticizer Prepared from Catalytic Oxidation of Lignosulfonate Soft-Switching Boost Half-Bridge Converter with High Voltage Gain and Low Input Current Ripple Finite Element Simulation of Crack Testing System of Electromagnetic Acoustic Emission Based on ANSYS The Optimization of Cutting Parameters of Cast Iron Based on the Genetic Algorithm Optical Character Recognition of Postmark Date Based on Machine Vision Detection Technology and Application of SpO2 Based on Dual Wavelength System The Control of Fixed-Bed Reactors for Biomass Pyrolysis: An Overview Database System Construction of Unearthed Textiles A Method of Generating Three-Dimensional Terrain Based on Digital Geographical Topographic Map Multi-Objective Scheduling Based on Weighted Combination of Heuristic Rules and the Simulation Method A Survey on the Status Quo of the Wood Carving Art of the Confucius' Temples in Hunan Province Research on the Design of Windshield Inspection Gauge Based on WAVE Technology Chapter 6: Engineering Material, Mechanical Engineering and Applied Mechanics Shipbuilding-Oriented Welding Technology Based on NX Research on Wet Thermal Recovery Plant Used by Air Conditioning The Flying Height Control with a Switched Controller for Data Storage Devices DNA Addition Algorithm Based on Molecular Beacon Discrimination of Internal Wall Thinning in Pipeline with PPP-BOTDA Based Distributed Optical Fiber Sensors The Implementation of PCIE Image Transmission Board Research on Coordinated Control System of Unit Considering Regenerator System Based on Bilinear Fit Slope Stability Analysis Based on Strength Reduction Method FEM from the Perspective of Mechanics Finite Element Analysis of a Certain Tracked Vehicle Engine Compartment Test-Bed Support Bearing Capacity Evaluation of RC Beam Bridge Based on Crack Index Analysis and Implementation of a Zero-Voltage-Switching Zeta Converter Analysis and Processing Method of Insufficient Anti-Floating of Basement Parking Garage Floor CFD Analysis on Fire Feature of Subway Station with Different Location of Ticket Machine Grafting Modification of Sesbania Gum and Sizing Performance Simulation Analysis on Crowd Evacuation of the Subway Train Fire Electrospun MWCNTs/Poly(lactic-co-glycolic acid) Composite Nanofibrous Drug Delivery System Effect Analysis of Different Exhaust Velocity on Fire Smoke Control in Subway Tunnel Experimental Study on Working Performance of Axially Loaded Short Columns with Micro-Expansive Concrete Filled Steel Tube The Study of Influence Laws of the Part Orientation on the Dimensions of Green Part Base on SLS The Study on Combustion Mechanism of Methanol and Diesel Micro-Emulsion in Engine The Traits of Orthogonal Quarternary Small Function Wraps according to Quantity Matrix Dilation Performance Study of New Energy-Saving Gas Stove and its Optimization A Novel Kind of Turbidity Sensor and its Measurement Method Experimental Study of Mercury Releasing Characteristics of Coal Fly Ash under Mild Thermal Condition Digital Single-Phase Thyristor AC Voltage Regulator Research Based on Fuzzy PID and APF Control The Corrosion Characteristic Study of GGH Materials Automatic Gas Meter Reading System Based on Wireless Sensor Network Steel Structure Damage Detection Based on BOTDR Based Distributed Fiber Optic Sensors Study for Fuel Management about Energy Saving Index of Thermal Power Plant The Application of LTD-2100 GPR (Ground Penetrating Radar) in Inspection of Concrete Structures An Adaptive Segmentation Algorithm Based on Threshold Surface New Construction Technique Applied in Super High Rise Concrete Structure - Wanxin Building in Shenyang, China Experimental Study on Direct Biomass Reburning Denitrification The Kinetic Analysis of Biomass Burning Based on Two-Component Reaction Model Research on Reconstruction Algorithm of Temperature Field by Acoustic Measurement in Boiler Research on Monitoring Instrument of Environmental Condition Removal of Methylene Blue from Aqueous Solution by Powdered Expanded Graphite: Adsorption Isotherms and Thermodynamics A Review of Wind Energy Activities in China Study on Advanced Oxidation of Cafeteria Wastewater Using Fenton Reagent Study on Different Advanced Oxidations of Cafeteria Wastewater Study and Practice of Cleaner Production Pre-Audit on a Pharmaceutical Factory in Harbin Study on a Practical Case of Cleaner Production Audit The Quality Management of Food Cold Chain Logistics Based on PDCA Cycle A Dynamic Cost Sensitive Support Vector Machine Design of Monitoring and Controlling Software of Footwear Sole Friction Based on QT

by "Nielsen BookData"

Related Books: 1-1 of 1

Details

  • NCID
    BB09084736
  • ISBN
    • 9783037853443
  • Country Code
    sz
  • Title Language Code
    eng
  • Text Language Code
    eng
  • Place of Publication
    Durnten-Zurich
  • Pages/Volumes
    2 v.
  • Size
    25 cm
  • Parent Bibliography ID
Page Top