Advanced research on engineering materials, energy, management and control : selected, peer reviewed papers from the 2012 Second International Conference on Engineering Materials, Energy, Management and Control (MEMC2012), March 17-18, 2012, Wuhan, China
Author(s)
Bibliographic Information
Advanced research on engineering materials, energy, management and control : selected, peer reviewed papers from the 2012 Second International Conference on Engineering Materials, Energy, Management and Control (MEMC2012), March 17-18, 2012, Wuhan, China
（Advanced materials research, v. 424-425）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
In these proceedings are to be found original ideas and new angles on aspects of Engineering Materials, Energy Management and Control. They are the result of a forum where researchers could exchange their innovative ideas from new viewpoints. These proceedings will provide valuable guidance to scientists, physicists, chemists, teachers and others, world-wide.
Table of Contents
Preface and Committee
Chapter 1: Engineering Materials, Energy Science and Dynamic System in Mechanical Engineering
A Numerical Simulation of Surface Deformation due to Ore Drawing Perturbation
Performance Investigate of Fine Aggregate Size and Content on Asphalt Mastic
Description of Process Automation System for the Plate Mill Shearing Line
Fluorescent Properties of Mg (II) Complex with 1-Acetyl-2-Naphthol-4, 4'-Diaminodiphenylmethane
Application of Dynamic and Reusable Report Generation System in Urban Environmental Remote Sensing Monitoring
Hydrothermal Synthesis and Luminescent Characterization of Zn (II) Complex with 1,4-Bis(2'-formylphenyl)-1,4-dioxabutane Isonicotinoylhydrazone
Wavelet Analysis on Vibration Signal during Unsteady Process
Synthesis and Photoluminescent Properties of 1-Acetyl-2-naphthol -4, 4'-diaminodiphenylmethane and its Cd (II) Complex
Design of Industrial LCD Terminal System for Intelligent Image Display
Key Anti-Friction Technology Breakthrough in Steel Collars: First Using Electro Slag Remelting in the Second Remelting of HSS Collars
Evaluation of Liuli Expressway Landscape Quality Based on Rough Set Theory
Traditional Chinese Medicine Epimedium Release from PLGA/HA Scaffolds Prepared in Supercritical CO2
Optimizing Build Parameters for Integral Stereolithography System
Research on Warning Model about Drug Shortage in Hospital Based on RS-SVM
Application of Electrohydrodynamic Drying Technology in Sludge
Effects of Initiator and Catalyst on Properties of Dental Zirconia-Toughened Alumina Ceramic Base Crown Prepared by Gelcasting
The Research of Dynamic Path Planning Based on Improving Fuzzy Genetic Algorithm in the Vehicle Navigation
Effect of Eutectic Reaction Induced by La on Microstructure in Semisolid A356 Alloy
Learning Machine Design for Mechanic Fault Diagnosis Expert System
Hydroxyapatite-Carbon Nanotubes Composite Coatings on Ti Substrate
The Finite Element Analysis and Topology Optimization of Semi-Trailer Frame
The Thinking on Premise of Constructing the System of Carbon Finance in Heilongjiang Province
Remote Monitoring System for Aquaculture Based on Ethernet
Summary of Carbon Sequestration Methods
The Features of Multiscale Pseudoframes and Gabor Frames According to Bivariate Filter Functions
Study on Mechanism of Separate Type Boundary Lubrication in Low Frequency Torsional Vibration Tapping
Research of a ZVZCS Full-Bridge PWM DC/DC Converter Based on Parallel Current-Mode Control
Partner Choice of Iron and Steel Logistics Alliance Based on Fuzzy Analytic Hierarchy Process
A Portable JPEG Image Application System Base on SOPC Technology
On the Basis of Forest Volume Expansion Method to Predict the Carbon Sink Potentiality in Daxing'anling
Experimental Study on Wear Monitoring of Marine Diesel Engine's Piston Ring by Magnetoresistive Sensor
Effect of Replacement of Fe2+ by Co2+ in W-Type Hexagonal Ferrite BaFe18O27 to its Electronic Properties from First Principles
Culture Conditions Optimization of Hyaluronic Acid Production Based on GP and QPSO Algorithms
Modeling the Spread of Electric Vehicles Based on Life-Cycle Cost
Video Image Segmentation and Understanding
Electron Spin Relaxation in Semiconductor Quantum Wells
Simulation and Research of Heating Load about Residential Construction Based on Zhengzhou
Design and Implementation of a File Transfer System Based on .NET Remoting
Hardware Design of Precision Injection Molding Machine Temperature Control Circuit
Modeling and Simulation of a Grid with a Doubly Fed Induction Generator
Hybrid Evolution Strategies Algorithm Based on Dynamic Demes
Literature Review of the Domestic Research on Emission Trade
Analysis of Necessity of the Acceleration of Solid Waste Management in China in "Twelfth Five-Year Plan" Period and Suggestions
Application Research of Information Technology in Vehicle
Study on Product Design Management based on Product Resources
Methods of Shoes Style Creation Design
Based on the Supply Chain Integrator for the High-End Logistics System of Dangerous Goods
The Analysis of the Influence of Highway Construction and Operation on Industrial Structure Adjustment in Heilongjiang Province - Co-Integration Test and Causality Test Based on Data from 1995 to 2009
The Quest into China Engineering Materials Personnel Training Mode
Chapter 2: Energy Materials and Mechanical Engineering Application
The Relationship between Freeway Safety and Geometric Design Elements
Optimization Research on Cyclic Waterflooding in Low Permeability Fractured Reservoir
A Novel Fusion Algorithm of Visible Image and Infrared Image Based on NSCT
Traffic Throttling to Improve TCP Incast Throughput
Mine Gas Wireless Monitoring and Forecasting Network Based on Support Vector Machine
Design of Multi-Sensor Communication System of Wheelchair Robot Base on the CANopen
Analysis to Effective Elastic Modulus and Porosity for Artificial Bone Scaffold with Hydroxyapatite Microspheres
Protein Folding Simulation Based on Improved Simulated Annealing Algorithm
Modeling and Analysis of Metabolism Process with Finite State Machine
Parametric Modeling of Five Typical Cylindrical Shells
Research and Design on the High-Voltage Line Harmonic Detection Based on a New Method
The DGPS Maximum Speed Prediction Based on AR Model in Full-Scale Speed and Power Trial
Parametric Modeling of Six Typical Reticulated Dome
Effect of Ambient Temperature on Three-Shaft Gas Turbine Performance under Different Control Strategy
Modeling, Simulation and Analysis of Mechanical Ruling of Echelle Grating
Analysis on Vibration Conductivity in Walls of Hydropower House Based on Power Flow Theory
Feature Extraction of Acoustic Emission Signals for Rotor Fault Based on Daubechies Wavelet Analysis
Simulation and Analysis of Deep Excavation and Loading by Using FLAC3D
Optimum Design of a Parabolic Flexure Hinge Based on Compliance Closed-Form Equations
A Wavelet-Based Watermarking Algorithm Using the Human Visual System
A Method of License Plate Chinese Character Recognition Based on Image Quality
Application of SLP in Plant Layout Based on Low Carbon Logistics
Chaos, Sliding Mode Control between Two Different Fractional-Order Hyperchaotic Systems with Uncertain Parameters
Shape Optimizing Design of Kiewiti Spherical Reticulated Shell
Study on Carrying out Kanban Production System in a Engine Assembly Workshop
Optimal Design of Basic Parameter of Disconnected Steering Trapezoid
Evaluation of Rolling Bearing Vibration Using Fuzzy Set Theory and Chaos Theory
Kolmogorov Entropy Optimization in the Aeroengine Health Monitoring
Application of the Regularization Chaos Prediction Model in Aero-Engine Performance Parameters
Frequency Balance Influence to Signal-to-Noise Ratio of Bistable Stochastic Resonance in Signal Smart Regression Recognition Procedure
Calculation and Analysis Techniques of Foundation Pit Engineering Based on FLAC3D
Study on the Network System of City Earthquake Prevention and Emergency Centers with the Community Public Facilities as the Nodes
Mathematical Relationship between Solar Radiation Intensity and Exterior Wall Temperature
Motion Trajectory Planning of 3-Dof Wire-Driven Parallel Robot
The Design and Calculation of an Underwater Carrier's Hood Separation
An Inverse Problem of Eigenvalue for Generalized Anti-Tridiagonal Matrices
Distributed Fieldbus Technology for Generator Excitation System Data Storage Design
Rotor Current Method of Directional Control of Doubly-Fed Motor Without Speed Sensor Based on Vector Control
Environmental Risk Assessment of General Contractor's EPC Project
Train Monitoring System Design Based on ARM-Linux Embedded Syetem
Construction of Luciferase Reporter Plasmid with Human AQP1 Gene Promoter
Quantitative Study on the Relation between Water Disaster and Grain Production of Hubei Province
New Nash Equilibrium Based on Generic Risk Element Transmission Theory
Application of Fuzzy Closeness in Siberian Tiger Skin Texture Recognition
The Metabolic Capabilities of Two Cells in Enterobacteria
An Anti-Jamming Algorithm of SDM Based on the Cyclostationarity of the Signals
Removal of Gas-Phase Elemental Mercury by Photocatalytic with Liquid Absorption
Discrete Spatial Solitons in the Two-Dimensional Optical Waveguide Arrays
Microscopic Numerical Simulation of Reinforced Concrete Damage Evolution under Uniaxial Tension and Compression
Chapter 3: Material Science, Manufacturing Engineering and Production System
Tuning Algorithm for Modeling and Controllability of Fractional-Order Control Systems
Study on Melt Adhesive Used in Aluminium-Plastics Composite Board
Review on Singular-Value-Decomposition-Based Digital Watermarking Algorithm in Combination with Image Features
Study on the Firing Table Compiling of a New Type of the Very Low Altitude Interception Device
Numerical Study on Double Layers Fragment Warhead under Asymmetrical Initiation
The Research on the Calculation Methods and the Influential Factors Analysis of the Mechanical Joint Persistence Ratio of Jointed Rock Mass
An Algorithm for Map Coloring Problem Based on Depth First Search
Bioinformatics Analysis of the Complete Nucleotide Sequence of the Duck Enteritis Virus (DEV) US2 Gene
The Optimization of EB Flatform with Dynamic Cache
Bioinformatics Analysis and Characteristics of US2 Protein Encoded by the Newly Identified US2 Gene of Duck Enteritis Virus
Framework of 3D Model Manufacturing Features Extraction Technology
Common Breakdowns Analysis and Processing Measures on Frequency Inverter
Effect of Working Parameters on the Damage of Ladder Impact Drill
The Research on Directional Elements of High-Voltage Line Protections Based on Zero-Sequence Reactance of Fault Components
Structure Optimization of Large-Diameter Percussive Drill
Analysis of Soft Rock Tunnel Mechanics Effects Based on Strain Softening Model of Surrounding Rock
Simulation of Design and Optimization of Local Oil Gas Ventilation Equipments with CFX
Analysis of Influencing Factors of Coal-Biomass Compound Briquets Combustion Characteristics
Optimization Design of Gravity Dam Section Based on PSO Algorithm
The Process Modification of Bathing Wastewater Treatment and Reuse System in School
Application of Organic Inclusion in Hydrocarbon Exploration
Design and Implementation of NIDS String Matching Based on SOPC
Analysis of Heat Exchange Efficiency during the Spray Cooling Process
Research on the Sensory Quality Evaluation of Agricultural Food Based on Linguistic Information
N-Soliton Solutions for (2+1)-Dimensional Nonlinear Dissipative Zabolotskaya-Khokhlov System
End Processing of MAEAM Pair Potential for BCC Metals
A New Compact Dual-Band Filter Using SIR
A Novel Kernel Matrix Isomap Algorithm Based on Partial Least Squares
Study on MAEAM Multi-Body Potentials with Farther Neighbor Atoms for HCP Metals
Modeling of Arbitrary Power Level PV Array Based on Circuit Equivalent Mechanism
The Use of Biotreatment Technology to Dispose of Offshore Drilling Waste Oily Fluids
Forklift Hydraulic System Simulation Based on ADAMS
Optimization and Validation of an Indirect Competitive ELISA for Detecting Enrofloxacin Residue
Dynamic Routing Algorithm Based on HIP Multicast Model
Preparation of Artificial Antigen and Immunological Trait for Estradiol
The Design and Implementation of Monitoring Data Warehouse of Ambient Air Quality
Photocatalytic Activities of HZSM-5 Supported TiO2 in Different Electrolyte Solutions
An IoT Anomaly Detection Model Based on Artificial Immunity
Analysis and Improvement of Vibration and Noise for Driving Axle
Photocatalytic Activity of TiO2 Coated on HZSM-5 Prepared by Oxalic Acid Treatment
Prediction and Analysis of Vehicle Cab Interior Noise Based on Structure-Acoustic Coupling
Electrochemical Study on S2- to the Surface Passivation Film of T23 Material Used in Supercritical Unit Tubes
Investigation of Vibration for Vehicle Rear Axle Based on Modal Analysis
Development of the Self-Motion Advanced Hydraulic Support Based on the Virtual Prototype Technology
The Analysis of Frame-Shear Wall Structure Model
Research on the Performance of the Autoclaved Fly Ash Common Brick
A Measurement and Analysis Technique of Curves of Metal Parts
Bioinformatics Analysis and Characteristics of UL14 Protein Encoded by UL14 Gene in Duck Enteritis Virus
Vascular Contour Extraction of MRS Regional Morphology Algorithm Based on Sobel Operator
Analysis of Synonymous Codon Usage in the UL14 Gene of Duck Enteritis Virus
Chapter 4: Engineering Material, Energy Science and Dynamic System in Mechanical Engineering
Three Layers Optimization Model for Time-of-Use and Interruptible Price Based on Fuel Saving and Emission Reducing
A Research Review of the Construction Problem of Dynamic Alliance of Project Oriented Small and Medium-Sized Enterprises
Nonlinear Controller Design for Hypersonic Vehicles Based on Dynamic Inversion Considering Flexible States
Resource Representation in Migrating Workflow System Modeling
Research on Road Signs Recognition Based on Machine Vision
Stiffening and End Processing of MAEAM Pair Potential for FCC Metals
Overview: Methods of Crack Damage Detection Based on Modal Analysis
The Analysis of Wireless Channel in the Workshop of Chemical Water Treatment in Power Plant
A Novel Multi-Layer Intelligent Test and Adjustment Technology for Water Injection Well
Flow Control Strategy for Novel Layered Synchronous Water Injection Technology in Oilfield
Synthesis of Li0.8Zn1.1PO4 and its Selectivity to Li+ Exchange
Research on Inverter Fault Detection and Diagnosis
Sewage Anti-Blocking Machine Principle and Double-Stage Pump Technology
Research on Gas Station Selection Support System with Given Refueling Volume
A Fast Image Encryption by Bit-Chaotic-Shuffle Based on Chaotic Systems
Laser-Induced Electroless Copper Deposition on Modified Plastic Surface
Cost-Effective Energy Recovery Circuit for Plasma Display
Analysis on Peeping Image Enhancement of Coal Mine Borehole Based on Wavelet Packet Decomposition
Non-Isolated Single-Switch Step Up/Down Converter with Wide Conversion Range
Study of an Inorganic Ion Exchanger Li1.2Zn0.9PO4
The Airport Runway Foreign Objects Detection Method Research Based on the Algorithm of SIFT
The Synthesis and Ion-Exchange Property of Li+ Memorized Spinel LiZnPO4
Interleaved Synchronous Buck Converter with a Coupled Inductor
Speed and Rotor Position Identification for PMSM Based on Improved Nonsingular Terminal Sliding-Mode
Operation Mode and Cost Analysis of Pure Electric Vehicle Charging System with Polymer Insulation Materials in China
Optical Performance of Horizontal Single-Axis Tracked Solar Panels
Study on Slag Entrapment of Molten Steel in Mold with Electromagnetic Stirring Technology
A Signal Processing Method for Ground Monitoring System of a Certain Missile's Guidance Module
Quality Control and Supervision of Material in Construction
Preparation of Microbial Flocculant and its Preliminary Application on Removal of Ammonia in Tannery Effluent
Research of Minimum Ship Safety Manning for Trial
Wetland Plant Landscape Construction of the Ancient Canal Combining Archaic Rhyme with Wild - Taking China Yangzhou Sanwan Wetland Park as a Case
Design of Mould on Cold Rolling for CARB Bearing's Arc Roller
The Solar Assisted Ground-Source Heat Pump Heating Applied Research of Cold Regions
Diamond Tools Matrix Composites of Co Replaced by Fe with Doping Rare Earth
Development and Analysis on Energy Conservation Equipment and Control Technology of HVAC
Numerical Study of the Effect of Wall Opening on Wind Pressures on Low-Rise Gable-Roofed Buildings
Material's Chemical Reaction Progression Variables Fluctuating and Detailed Equilibrium Principle
Kinematic Analysis of Humanoid Based on Screw Theory
Enhanced Hydrolysis of Furfural Residues by Trichoderma cellulases with Addition of Natural Surfactant Tea Saponin
DTA of Rare-Earth Fe-Based Matrix Composites for Diamond Tools
A Design Proposal of Integrated PC-Architecture Embedded Control System for Remotely Operated Weapon Station
Improvement of Running Tunnel Based on OSPF TE
Design of Internal Control Risk Management System of Coal Mining Enterprises Based on Systems Engineering
Research on the Forest Inventory Based on Three Dimentional Laser Scanner
Solving the Dynamic Model of Metabolic Network of Escherichia coli by Adams Methods
Finite Element Analysis of High Pressure Storage Tank
Research of the Sprayed Steel Fiber Concrete Application in Tunnel Construction
Research and Exploration of Waste Money Drilling Technology
Investigation on Shading Effect of Urban Green Space in Summer in Hangzhou
Chapter 5: Environment Research, Dynamic System and Applied Mechanics
The Study on Organic Acid Detection Using Lon Chromatography
The Application of the Fuzzy-PID in the Circulating Water Control System with Constant Pressure
Numerical Simulation of Turbulent Flow for Various Inlet Velocities in Tee Junctions with Periodic Porous Media
Intelligent Control Method for Aircraft Deicing Fluidtemperature Based on a New Adaptive Smith Predictor
Correction Technology and Development on Active Power Factor
Development of Electric Automobiles and Electric Vehicle Charging Facilities in China
Synthesis of SrTiO3 Nanoparticles by a Simple Sonochemical Method
Characteristics Analysis of Double Chevron-Type Plate Heat Exchanges with Different Corrugation Ratios
Research on Environment of Dwellings with Rammed Earth Walls in Deqin Area in Yunnan Province
Research Based on Simulink of Hearth Negative Pressure Control System
Research on the Weak Signal Detecting Technique for Crop Water Stress Based on Wavelet Denoising
Experimental Study on the Characteristics of Modified Ca-Based Sorbents and its Mercury Adsorption Capability in the Flue Gas
Research on New Folk Houses with Regional Characteristics and Earth Material
Photoelectrocatalytic Oxidation of Methyl Orange in KCI Solution
The Measurement Method to Position Coordinates of Movable Platform for a Parallel Machine Tool
Influences of Aeration and pH on Activities of HZSM-5 Supported TiO2
GA-CDFM Based Hybrid Optimization Method for Steelmaking Scheduling and Caster Operation
Effect of Ultra-High Pressure on the Characterization of Ursolic Acid/ -Cyclodextrin Inclusion Complex
Research of the Measurement Technique for the DC Motor Sensorless Control
Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper
Research on Repeat Compensation Algorithm in the Servo System of CNC Machine Tools
Effect of Electron Beam Treatment on the Surface Properties of AZ31B Magnesium Alloy
Hydrogen Bell-Type Furnace Control System Based on Multi-Layer System Structure
Non-Isolated High Step-up DC-DC Converter with a Coupled Inductor
Tire Shredding Delamination Peeling Method Research
The Characteristics Research of Spray Evaporative Condenser
AMLU Truck Crane Torque Instrument Working Set and Analysis
Research on Nonlinear Modeling and Simulation for Flexible Drive Train of Wind Turbine
Photoelectrocatalytic Oxidation of Methyl Orange in KNO3 Solution
Quality Detection of Punched Sheets with Circle Fitting Based-On Machine Vision
Low Power Wi-Fi(IEEE 802.11) for Mobile Sensing of the Internet of Things of Mine
Preparation and Analysis of Magnetic Nanoparticles Used as Highly Active Catalysts over a Wide pH Range
Application and Research of XML Technology in IETM
Optical Navigation Satellite Constellation Design
Obstacle Detection System Based on Stereo Vision and a Structured Light
The Performance Research of Ceramic Fibers Filtration Composite Material
FSSS Technical Retrofit of 130T/H All Gas Fired Boiler
Installation Determination Method of the Combined Wind-Storage System Aiming at Smooth Effects
Concrete Superplasticizer Prepared from Catalytic Oxidation of Lignosulfonate
Soft-Switching Boost Half-Bridge Converter with High Voltage Gain and Low Input Current Ripple
Finite Element Simulation of Crack Testing System of Electromagnetic Acoustic Emission Based on ANSYS
The Optimization of Cutting Parameters of Cast Iron Based on the Genetic Algorithm
Optical Character Recognition of Postmark Date Based on Machine Vision
Detection Technology and Application of SpO2 Based on Dual Wavelength System
The Control of Fixed-Bed Reactors for Biomass Pyrolysis: An Overview
Database System Construction of Unearthed Textiles
A Method of Generating Three-Dimensional Terrain Based on Digital Geographical Topographic Map
Multi-Objective Scheduling Based on Weighted Combination of Heuristic Rules and the Simulation Method
A Survey on the Status Quo of the Wood Carving Art of the Confucius' Temples in Hunan Province
Research on the Design of Windshield Inspection Gauge Based on WAVE Technology
Chapter 6: Engineering Material, Mechanical Engineering and Applied Mechanics
Shipbuilding-Oriented Welding Technology Based on NX
Research on Wet Thermal Recovery Plant Used by Air Conditioning
The Flying Height Control with a Switched Controller for Data Storage Devices
DNA Addition Algorithm Based on Molecular Beacon
Discrimination of Internal Wall Thinning in Pipeline with PPP-BOTDA Based Distributed Optical Fiber Sensors
The Implementation of PCIE Image Transmission Board
Research on Coordinated Control System of Unit Considering Regenerator System Based on Bilinear Fit
Slope Stability Analysis Based on Strength Reduction Method FEM from the Perspective of Mechanics
Finite Element Analysis of a Certain Tracked Vehicle Engine Compartment Test-Bed Support
Bearing Capacity Evaluation of RC Beam Bridge Based on Crack Index
Analysis and Implementation of a Zero-Voltage-Switching Zeta Converter
Analysis and Processing Method of Insufficient Anti-Floating of Basement Parking Garage Floor
CFD Analysis on Fire Feature of Subway Station with Different Location of Ticket Machine
Grafting Modification of Sesbania Gum and Sizing Performance
Simulation Analysis on Crowd Evacuation of the Subway Train Fire
Electrospun MWCNTs/Poly(lactic-co-glycolic acid) Composite Nanofibrous Drug Delivery System
Effect Analysis of Different Exhaust Velocity on Fire Smoke Control in Subway Tunnel
Experimental Study on Working Performance of Axially Loaded Short Columns with Micro-Expansive Concrete Filled Steel Tube
The Study of Influence Laws of the Part Orientation on the Dimensions of Green Part Base on SLS
The Study on Combustion Mechanism of Methanol and Diesel Micro-Emulsion in Engine
The Traits of Orthogonal Quarternary Small Function Wraps according to Quantity Matrix Dilation
Performance Study of New Energy-Saving Gas Stove and its Optimization
A Novel Kind of Turbidity Sensor and its Measurement Method
Experimental Study of Mercury Releasing Characteristics of Coal Fly Ash under Mild Thermal Condition
Digital Single-Phase Thyristor AC Voltage Regulator Research Based on Fuzzy PID and APF Control
The Corrosion Characteristic Study of GGH Materials
Automatic Gas Meter Reading System Based on Wireless Sensor Network
Steel Structure Damage Detection Based on BOTDR Based Distributed Fiber Optic Sensors
Study for Fuel Management about Energy Saving Index of Thermal Power Plant
The Application of LTD-2100 GPR (Ground Penetrating Radar) in Inspection of Concrete Structures
An Adaptive Segmentation Algorithm Based on Threshold Surface
New Construction Technique Applied in Super High Rise Concrete Structure - Wanxin Building in Shenyang, China
Experimental Study on Direct Biomass Reburning Denitrification
The Kinetic Analysis of Biomass Burning Based on Two-Component Reaction Model
Research on Reconstruction Algorithm of Temperature Field by Acoustic Measurement in Boiler
Research on Monitoring Instrument of Environmental Condition
Removal of Methylene Blue from Aqueous Solution by Powdered Expanded Graphite: Adsorption Isotherms and Thermodynamics
A Review of Wind Energy Activities in China
Study on Advanced Oxidation of Cafeteria Wastewater Using Fenton Reagent
Study on Different Advanced Oxidations of Cafeteria Wastewater
Study and Practice of Cleaner Production Pre-Audit on a Pharmaceutical Factory in Harbin
Study on a Practical Case of Cleaner Production Audit
The Quality Management of Food Cold Chain Logistics Based on PDCA Cycle
A Dynamic Cost Sensitive Support Vector Machine
Design of Monitoring and Controlling Software of Footwear Sole Friction Based on QT
by "Nielsen BookData"
