Advanced manufacturing technology : selected, peer reviewed papers from the 3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012), March 27-29, 2012, Xiamen, China

著者

• International Conference on Manufacturing Science and Engineering
• Chen, Wenzhe

書誌事項

Advanced manufacturing technology : selected, peer reviewed papers from the 3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012), March 27-29, 2012, Xiamen, China

edited by Wenzhe Chen ... [et al.]

（Advanced materials research, v. 472-475）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

The present volumes contain comprehensive up-to-date and cutting-edge world-wide research results on manufacturing science and engineering, focusing on Advanced Manufacturing Technology. The 672 peer-reviewed papers are grouped into 21 chapters: Surface Engineering/Coatings; Modelling, Analysis and Simulation of Manufacturing Processes; Materials Forming; Materials Machining; Welding & Joining; Material Design of Computer Aided Manufacture; Microwave Processing of Materials; Thermal Engineering Theory and Applications; CAM/CAE; High-Speed/Precision Machining and Inspection Technology; Micro-Machining Technology; Laser Processing Technology; Bionic Mechanisms and Bio-Manufacturing; Virtual Manufacturing and Network Manufacturing; Remanufacturing Engineering; Sustainable Manufacturing Technologies; Digital Manufacture and Management; Quality Monitoring and Control of the Manufacturing Process; System Analysis and Industrial Engineering; Production and Operation Management; Green Supply Chain.

目次

Preface, Sponsors and Organizing Committees Chapter 1: Surface Engineering/Coatings Anodic Behavior of Copper in 1-Hydroxyethylene-1, 1-Diphosphonic Acid (HEDPA) Baths Real-Time Generation of Cutter Location Curves for Pen-Cutting of Sculptured Surface Accelerated Fatigue Life Testing of Nicr-Cr3C2 Coating at Different Loads under Rolling Contact Condition Investigation on Thermal Oxidative Stability of Coolant and Lubricant of Magnesium Alloy in Rolling Process Using TG-DSC Analyzer Minimum Zone Evaluation of Flatness Error Using an Adaptive Iterative Strategy for Coordinate Measuring Machines Data Plasma Nitriding of 20CrMo Steel with Nanostructured Surface Layer An Artificial Immune System Approach to Business Process Mining On Enterprise Operation Efficiency and Strategic Research Based on Super-efficient DEA Influence of the Deposition Temperature on the Properties of Medium-Frequency Magnetron Sputtering WS2 Soft Coated Tools Effect of Surface Pretreatment on Morphology and Microhardness on Carbon Coating Using PVD Experiment on the Anti-Blocking Technology in No-Tillage Wheat Seeding Predicition of GRT Fiber-Rubberized Haydite Concrete Compressive Strength Based on Multiple Regreeion Analysis and BP Neural Network Modifing PET Fabric Surface with Peanut Protein Characteristics of Electroless Nickel-Phosphorus-Potassium Titanate Whisker Composite Coating Design, Generation and Bending Stress Analysis of Face-Gear with Curvilinear Shaped Teeth Investigation of the Effect of Process Parameters on Surface Roughness in Wire EDM of Titanium Alloy Application of Crab Shell Chitosan on Nonwoven Wool Morpholog and Conductivity of High-Solid Content Waterborne Polyurethane Dispersions with Sulfonated Polyol and Carboxylic Polyol as Compound Hydrophilic Chain Extender A Temperature Control System Design Using Integration Network Deterministic Model and Genetic Algorithm of Joint Inventory Control for Virtual Logistics Preparation of Carbon Fiber/MoS2 Core-Shell Structure by Surface Modification and Precipitation Process in Aqueous Solution Minimum Norm Multidimensional Scaling Solution for Mobile Station Localization in Wireless Sensors Network Effect of Carbon Black Pigment on the Surface Resistivity of the Black Silicone Thermal Control Coating Optimized Tool Path Planning for Five-Axis Flank Milling of Ruled Surface Considering Tolerance Electroless Sn Deposition on Magnesium Alloy and Wastewater Treatment Conformal Geometry Solitons Effect of Passivation on Pitting Corrosion of 316L Stainless Steel in Concentrated Seawater Milling Parameter Optimization Based on Control of Aluminum Alloy 7475 Surface Roughness A Novel Electrodeposited Ni-Cr-Al Nanocomposite with Improved Oxidation Resistance Comparison of Hot Corrosion Resistance of YSZ and CYSZ Thermal Barrier Coatings in Presence of Sulfate-Vanadate Molten Salts Multi-Level Recommendation for Sketch Based 3D Toy Modeling Effects on Corrosion Resistance of Ce-Sealed Ni-P Coatings with Ni-Low P and Ni-Medium P Preparation and Photocatalytic Activity of Ag-TiO2/CNT Photocatalyst Correlation of Surface Alloyed Microstructure of Pure Magnesium With its Corrosion Behavior Microstructure Characteristics of Fe-xCr-C Hardfacing Alloys Fault Modeling for Electro-Hydraulic Servo System Based on Hybrid System Remote Monitoring System of Textile Equipments Based on ZigBee Technology Application of Low-Frequency Energy Increment Technology in Hydrocarbon Prediction Finite Element Simulation for TGO Instability with Crack Propagation under Thermal Cycling Based on Modified COD Criterion Dynamic Modeling of Continuum Flexible Leg System for Micro Robot Effect of Magnetic Field on the Electropolymerization and Corrosion Properties of Polyaniline (PANI) Film Emulation and Prediction of the Cold Roll Forming Force Research and Development of the Porthole-Die Aluminium Alloy Extrusion Processes Aviation Pipe Connection Fit's Contact FMA and its Structure Modification Analysis of Dynamic Responses of Pipe Vibration in Chemical Ship Framework of Saving and Intensive Land Use System in Chongqing: A View of Urban-Rural Integration Improvement on Microstructure and Cracking Susceptibility of Laser-Clad Ni-Based Layers by In Situ Generation of Tantalum Carbides and Borides Investigation of Thermal Shock Behavior of Plasma-Sprayed NiCoCrAlY/YSZ Thermal Barrier Coatings Copper Ultrasonic-Electrodeposition on Zn Alloy in Alkaline Bath Containing 1-Hydroxyethylene-1,1-Diphosphonic Acid Gibbs Free Energy Calculation of Al-Cu Alloy Using Thermo-Calc Software for Microstructure Simulation Lattice Boltzmann Simulation on Solid Oxide Fuel Cell Performance Design and Implementation of High-Voltage Plasma Cleaning Technology for Auto Lamps Influence Analysis of Coupled Neutronics and Thermo-Hydraulics on Steady-State Characteristics of Supercritical Water-Cooled Reactor Research and Implementation of Project-Driven Teaching on C51 Programming Properties of Electrospark Deposited Cr Coatings on AISI H13 Steel Make WPC Products More Beautiful by Secondary Processing Microstructure Analysis of TiC Reinforced Fe-Based Composite Coating by Plasma Cladding Damage Study of 22Cr2Ni4MoVA Steel in Artificial Crystal Growing Environment Process Study on Prepared Al2O3-TiB2 Composite Coating by Reactive Spray Preparation of Ni-Base Alloy Coatings on Monel Alloy by Laser Cladding Registration of 3-D Shape with Free-Form Surface Using Imageware and Genetic Algorithm Fabrication of Semisolid Billets of Hypereutectic Al-Si Alloy by Severe Plastic Deformation and Remelting Granite Step Gauge: A New Device for Error Measurement on CNC Machine Tools Determination of Residual Stress and Strain-Hardening Exponent Using Artificial Neural Networks Study Effect of Deflection on the Progress of Cracking in Aluminum with Different Heat Treatment Control, Effection and Analysis of Voltage during Dielectric Barrier Discharges Plasma Surface Treated Carbon Fibers Analytical Study on Mechanism of Electrolysis and Plasma Polishing Elimination Technology of the Iron Dissolved in Flux Solution of Hot Dip Galvanizing Process Design for Underwater Self-Propelled Model System Research and Development of High Reflection Infrared Radiating Coating Adopted on Ceramic Kilns Development of the Iron Elimination Technology of Acid Cleaning Solution of Hot Dip Galvanizing Process Analysis of the Drive of 01N AT Based on the Lever Method Design of FANUC System Human-Machine Interface and Machine Realization Based on C Language An Application of New Approach for Dynamic Orders Selection to Maximize Restaurant Operational Profits Evaluation of Water Cooling System of 1.5MW Rotor Based on CFD Effect of Cavitation on Tribological Performances for Textured Surfaces Hot Corrosion Behavior of NiCoCrAlYSiHf Coating Deposited by Arc Ion Plating Chapter 2: Modeling, Analysis and Simulation of Manufacturing Processes 3D Numerical Simulation Research on the Effect of Gate Location on Fiber Orientation and Injection-Molded Parts Deformation Effect of Rare Earth Metals on Inclusions and Impact Property of 2205 Duplex Stainless Steel Fatigue Life Analysis and Structural Optimization of Drive Axle Housing Based on FE-SAFE Formation of Mesophase Spheres in a QI-Free Coal Tar Pitch Evaluation of Volatile Organic Compounds from Asphalt Using UV-Visible Spectrometer Based on the CAM Error Prediction Research of BP Neural Network Fine Particles of Rubber Cutting Machine Designed to Explore Evaluation of Different Factors in Implementation of JIT Production System by Applying Simulation and Entropy Weighting Method Applying Deformation Resistance Estimation Method to Predict Nine Stand Hot Strip Mill Rolling Force Finite Element Analysis of Grinding Temperature Field with Water Vapor as Coolants Asymmetry-Induced Supramolecular Helices of Pyrene-Perylene Bisimide Triads Brief Analysis of Uyghur Folk Carpet Building Energy-Saving Technology Application in Avionics Anomaly Detection Using Multi-Variant Hotelling T2 Statistics Geometrical Springback Compensation Algorithm Based on UV Curves for Automobile Structure Parts Die-Face Experiment Study of AGV Navigation Based on Multi-Sensor Dynamic Research of Knitting Element for Computerized Flat Knitting Machine Based on ANSYS/LS-DYNA Finite Element Analysis on Directional Solidification of Al-Ni-Co Alloys Effect Mechanism of Elliptic Vibration Assistance on the Cutting of Brittle Materials Industrial Process Modeling Based on Online Learning Algorithm for Regression Least Squares Support Vector Machine Johnson Cook Material Model and Simulation Experiment of Aluminum Alloy 6005A Effect of Additive La2O3 on Synthesizing Diamonds Using Pure FeNi Powder Catalyst Drying Model and Moisture Diffusion Coefficient An Investigation into Sidings Allocation Strategy for Automated Container Terminal Based on A* Search Algorithm A Selective Reduced Integration 8-Node Hexahedral Element by Assumed Strain for Coining Simulation Characters of Lorenz Force Generated by a Single Linear Electromagnetic Stirrer Calculation of the Mixing Entropy of Sn in a Tin-Iron Bilayer Experiment and Meso-Damage Finite Element Analysis of Uniaxial Tension of Galvanized Steel Sheets A Geometric Error Identification and Simulation Method Based on Laser Tracker for Large-Scale Multi-Axis NC Machine Tools A TiO2/Fe3+ Coated on Fibre Glass Treatment for Phenol with UV Irradiation Effect of Shrinkage Reducing Admixture on Properties of Pumping Concrete Compressive Strength and SEM Observations of Geopolymers Reinforced by Carbon Fibers, Polyacrylonitrile Fibers and Cellulose Fibers Finite Element Analysis and Optimum Design of Octagon Horizontal Type Vacuum Tank Effect of Low Content Ca on the Microstructures and Mechanical Properties of AZ63 Alloys An R&D Project Dealing with Mechanical Bits and Pieces in Real Option Analysis Distribution of Carbon in Large Diameter Semi-Insulating Gallium Arsenide Grown by Liquid Encapsulated Czochralski Technique Fatigue Life Prediction of Composite Laminate Chapter 3: Materials Forming Technique of Line-Carved Relief Editing Based on Mesh Feature Operations Discuss of Bonding Mechanism of Al-Phosphate No-Bake Sand Characteristic Part Family and Similarity Retrieval Mechanism for Product Variant Design Study on Increasing Strength of Silkworm Silk Tribological Properties and Wear Mechanism of Copper-Graphite Composite Experimental Study on Adhesion of Oxide Scale on Hot-Rolled Steel Strip Nonlinear Vibration Characteristics Analysis of CNC Machine Tool Feed System A Multi-Resolution PID Controller Based on the Wavelet Transform Anti-Blocking Technology for Urban Sewage Source Heat Pump System Analysis on the Upholding Bracket for Bridge Fabricating System & the Building of its FEM Model Research on Deep Drawing with Multi-Point Variable Blank-Holder Force Controlling by Computer The Applications of Vacuum Drying Technology in the VIP Core Material' Pre-Treatment Left-Side of the Forming Limit Diagram (FLD) under Superimposed Double-Sided Pressure A Rack-and-Pinion Pumping Unit Design Friction Behavior under Different Forming Speed for Sheet Metal Forming A Research of Vibration Signal Processing of Air Suspension System FEM Simulation of Different Loading Pressures on T-Tube Hydroforming Plastic Forming Technology of Precision Tube The Application of SolidWorks in Bridge Erecting Machine's Structure Design Analysis of Edge Cracks in Hot Rolled Aluminium Alloy Sheets Contained of Magnesium for Can Usage The Structure Improvement Design of Turbodrill Diversion Liner Study on Precision Forging Schemes of Hypoid Driving Gear Microstructure and Properties of Ti6Al4V Alloy Prepared by Hot Isostatic Pressing Analysis on the Twinning of FCC Metals by EBSD Effect of Warm Deforming and Heat Treating on Microstructure and Mechanical Properties of Mg-Zn-Zr Magnesium Alloy Calculation of Chip Removal Air Volume of Blasthole Drill Analysis of Radial Strain Distribution in the Metal Spinning Process by Taguchi Approach Preparing Large Sized Billet of High Strength Aluminum Alloy with the Application of Low Frequency Electromagnetic Field An Investigation of Several Nb-Ti-Al Based Alloys on Microstructure Numerical and Experimental Approach for Incremental Thread Rolling Process of Micro-Sized Screws The Influence of Compressive Pressure in the Thickness Direction on Spring-Back for Aluminum Alloy Effects of Technical Parameters on Initial Silicon Melting in Round Cold Crucible Continuous Casting Manufacture of Hollow Cross Sectional Regenerated Cellulose Fiber Using HWM Spinning Method Research on Microstructure and Electrical Resistivity of Injection Molded Metallic Fiber-Filled Polymer Composites Design of Steering Wheel Control System of Tracked Vehicle of Hydro-Mechanical Differential Turning Nonlinear Analysis of I-Shaped Short Pier Shear Wall with Concealed Bracings Prediction of Effective Material Property of Tailor Welded Blanks for Air Bending Process Study of Solid/Liquid Interface of Ti46Al0.5W0.5Si Ingot Directionally Solidified by a Near-Rectangular Cold Crucible Effects of Parameters on the Stability of Silicon Melt Pool in Cold Crucible Continuous Casting Analysis on Processing Boundary of Stepped Shaft during Cross Wedge Rolling Process Formability Predictions of Deep Drawing Process for Aluminum Alloy A1100-O Sheets by Using Combination FEM with ANN Morphology and Tensile Behavior of 2024 Al Alloy Objects Fabricated by Uniform Droplet Spraying Deposition Finite Element Simulation and Analysis on Folding Defects of Inner-Grooved Copper Tubes Research of Automobile Engine Fault Diagnosis Based on Wavelet Packet Research on Power Properties of Vibration Ball-Medium Reactor in Transesterification for Polycarbonate (PC) Study of Large Castings Lost Foam Online Non-Contact Detection An Accurate Calculation of the Elongation of Strip in Tension Leveling Process Finite Element Analysis of Formability of Aluminum Alloy Double-Curved Panel by VPF Lightweight Structure Design of Refuge Chamber Design and Dynamics Simulation of a Micromachined Inertial Switch with Polymer-Metal Composite Fixed Electrode for Flexible Contact Geometrical Description of Two-Dimensional Optimization Design Model Stresses Unified Solution for Wire Forming Based on Unified Strength Theory New Hybrid Desalination Design and Modeling Research on Carbon Fiber Reinforced C/Cu Composites Chapter 4: Materials Machining Vibration Characteristics Analysis of a High-Speed Horizontal Machining Center Analysis on Grinding Force of SiCp/Al Composites Based on MATLAB Design of Electrocircuits for Ultra-Precision Positioning Platform Analysis on the Individual Stiffness of the Aerostatic Guide Way and Error Sources of its Vibration Statistical Analysis of the Roundness Error Data Electrochemical Machining Technology and its Latest Applications The Study on Spectral Imaging Technique in Detection of Dermatosis Design of New Small Hydroelectric Device Research on Process Parameter Effects on Surface Roughness and Subsurface Damage in CMP of Single Crystalline Silicon Variance Distribution and Energy Featured Non-Subsampled Contourlet Texture Retrieval Influence of Friction Stir Processing on Coarsening Dynamics of Fe-Rich Phase in Semi-Solid Al-Si-Fe Alloy Investigation of the Microgeometry after Hard Turning and Diamond Burnishing Magnetic Assisted Roller Burnishing and Deburring of Flat Metal Surfaces Development and Application of Multi-Modular Roll Magnetic Separator Antislip Design of Cleaning Robot for Municipal Drainpipes with Medium/Small Diameter Velocity Characteristics of the Wheel in Grinding Axisymmetric Aspheric with AEGM Finite Element Simulation of Axial Creep-Feed Grinding Engineering Ceramics Based on ANSYS/LS-DYNA The Simulation on Flow Field of Pesticide Nozzle with Vehicle Sprayer A Methodology of Multi-Objective Dynamic Liquid Level Measurement Based on Wireless Transmission Technology Study on the Electric Processing Characteristics of Difficult-to-Cut Materials Experimental Study of Drilling Carbon Fiber-Reinforced Plastic (CFRP) with Candlestick Drill Using the Taguchi Method Effect of Cutting Oil on Grinding Cemented Carbide An Online Surface Defects Detection System for Step-Axis Drilling of Glass Fibre Reinforced Plastic Research on Power Ultrasonic Vibration Honing of Sintered Nd-Fe-B A Novel Camera Calibration Method Based on Circle Array Target Analysis of Microstructure of Grinding Strengthening Layer in Point Grinding under Small Depth of Cut Conditions Influence of Original Structure on Microstructure and Properties of 35CrMo Steel after Zero Time Holding Quenching Fuzzy Control Design and Simulation for Drain Pipe Cleaning Robot Study of Tool Materials Rapid Selection in Cutting 300M Steel Study on the Machining of Iron-Based Thermal Spray Coating for Sleeveless Engine Cylinder Research on the Die Fittingness and Springback of Large Diameter Thin-Walled CT20 Titanium Alloy Tube NC Bending Sensitivity Analysis of Material Parameters on Spring-Back of NC Bending of High-Strength TA18 Tube The Research of Graphite Electrode to Processing Technology and NC Programming Intelligent Monitoring System for Parking Lots Based on 1394 Camera Indoor Ultrasonic Positioning System Based on CDMA-TDOA and its Ultrasonic Signal Analysis Research on Calculation Method of the Cutter Setting Angle in Screw Surface Form Milling An Experiment Study on Milling Forces in the Ultrasonic Milling of CFRP Experiment Investigation into Surface Strain and Roughness of SUS304 Strip Ground by Fixed Abrasives Design of Missile Autopilot with Aerodynamic Lift and Reaction Jets Based on Auto Disturbance Rejection Controller New Technology and Applications on Passive Millimeter-Wave Sensors Adaptive Repetitive Control of Nonlinearly Parameterized Systems Based on Fuzzy Basis Function Networks Experimental Investigation on Cutting Forces and Temperature in High Speed Turning of Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti-17) Alloys Microstructure Effect of Injection Molded Nanoparticle/Polymer Composites on their Resistivity Fabrication and Performance of Symmetrical Gradient Ceramic Nozzles Effect of Machining Parameters on Nano-Cutting of SiC Ceramics Research on the Method to Decompose Propagation Sound Wave in Annular Duct The Optimization of Precision Milling Parameters for Titanium Based on Genetic Algorithm Reducing the Shrinkage Defects in the ZA27 Casting Alloy by Using Electric Pulse Current Research on the Machining Behaviors in High Speed Milling Cellular Aluminium Alloy The Structure Optimization of Double Feeder System Core Components Study on Catalysis Mechanism of Electrochemical-Particles Jet Compound Machining Study of Optical Gas Chamber Based on Infrared Gas Sensor The Ambulatory UV Light Soure Dry Curing Machine Designing Infrared Continuous Temperature Measurement System for Molten Steel in Tundish A Research of a Remote Control System Based on Timed Petri Net for PDA Mechanical Properties of High Strength Concrete Filled Steel Tubular Columns Research on the Precession Angle (PA) Adopted in Polishing Large Aspheric Mirror Physical and Mechanical Properties of Five Heat-Treated Hardwood Species Design of Wireless Network Intelligent Gas Meter Chapter 5: Welding & Joining Numerical Simulation on the Temperature Distribution in Resistance Microwelding of Insulated Cu Wire Mechanism of Welding Test Pieces in Tensile Property Anomaly The Effect of Element Ag and P in Dissolving Action and Mechanical Performance of the Welds during Weld Brazing of Copper Research on the Distributings of Vibration Sensors for Fault Diagnosis in Axial Piston Pump The Audio Signal De-Noising Based on the ARIMA Model and Kalman Filter A Strategic Research on Technological Innovation of Tangshan Bay Fast, Two-Steps Syntheses and Characterization of Octa(Aminopropylsilsesquioxane) SH-CCT of High-Strain Pipeline Steel X80 Phase Transformation Behavior and Microstructure Characterization of 9Ni Cryogenic Steel Investigation to Self-Piercing Riveting of Wrought Magnesium AZ31 Sheets Numerical Analysis for the Characteristics of Stress Distribution on Lap Laser Welding Joint of Stainless Sheet Steel The Numerical Simulation of Residual Stress in the Diffusion Bonding Joints by Different Coefficients of Linear Expansion A Novel Measurement and Qualification Method of GMAW Welding Fault Based on Digital Signals Experimental Study on Limiting Temperatures of Circular Hollow Sections Dynamic Analysis of Human Ear during Sound Transmission Optimization of Process Parameters using DOE, RSM, and GA in Plastic Injection Molding The Sustainable Development Research about Microfinance - Take the Rural Credit Cooperative of Hebei Province as an Example Study on Composites for Furniture with Waste Paper and Wood Particle Research on the Interface Bonding Conditions of Bimetallic Rolls Manufactured by Liquid-Solid Bonding Method Research SMT Technology Parameter Optimize Based on NiPdAu PCB A Novel Composition Forecasting Model Based on Choquet Integral with Respect to L-Measure and O-Density Study on the Dephosphorization in Basic Electrode Welding The Stability and Management of "Sandwich" Type Slopes in Extrusive Rock Area Application of Fracture Mechanics in Ocean Engineering Structures Quality Control Optimal Design of an IPM Motor for Machine Tool Applications Effect of Strength Matching Performance on J-Integral of Inhomogeneous Welded Joints Analysis of Crack on Rail Web after Flash Welding The Study of Stadium Industrial Development Status and Countermeasures of Physical Education Institute Effect of Arc Length on Weld Appearance and Metal Transfer in Twin-Wire GMAW Process Numerical Study of Effect of Polymer Additives on Heat Transport in Turbulent Rayleigh- Benard Convection Fault Diagnosis System Based on UN-150ZB Mobile Rail Flash Butt Welding Fabrication and Characterisation of Nanofibres by Meltblowing and Melt Electrospinning Improve the Fatigue Performance of Welded Joints with Undercuts by TIG Dressing Treatment Study on Welding Parameters Optimization of Duplex Stainless Steel 2205 Based on Orthogonal Wear Behavior of Diamond+SiCp-Reinforced Metal Matrix Composite by Taguchi Method Uncertainty Evaluation of SEM-Based Nanoroughness Measurement Preparation of TS-1 Monolithic Catalysts and Activity Evaluation for Cyclohexanone Ammonization Reaction Polytomous Item Relational Structure Theory Based on Empirical Distribution Critical Value The Application of Fuzzy ANP in the Development of New Product Decision-Making - A Case Study of the Solar Module Industry Effects of Temperature and Strain Rate on Numerical Sigmoid Curve for AZ41 Magnesium Alloy Analysis of Temperature Distribution in Rotating Arc Welding A Seam Image Processing Method Based on Wavelet Compress Animation Tree in the Wind Study on Applied Load and Irradiation of Ultraviolet (UV) Aging of Polycarbonate Characteristics: Consequences on Mechanical Properties Research on Metallurgical Structure and Hardness of LY12 Aluminum Alloy Weld Zone under TIG and A-TIG An Experimental Study on the Fire Resistance Performance and Spalling of 100MPa HSC Column Mixed with Fiber-Cocktail Chapter 6: Material Design of Computer Aided Tracking Error Estimate for Theodolite Based on General Regression Neural Network Stress and Strain Concentrations in an Elasto-Plastic Bar of Circular Cross-Section with Semicircular Groove Properties of Electrospark Deposited YG8 Coatings on AISI H13 Steel Site Preference and Elastic Properties of 5d Transition Metals in Ductility YAg Alloys An Empirical Study on Consumer Purchasing Intention in Online Group-Buying The Mechanical Properties Research of Stress Frame Casting under Different Solidification Conditions X-FEM Applied to Three-Dimensional Curvilinear Crack Front Development of an Adaptive Mobil Front-Lighting System Using Multi-Functional Sensors Numerical Simulation of the Flow Field in Safety Valve Market Risk Analysis to Hydropower Project Based on Monte Carlo Method - Case Study of Xiluodu Hydropower Station in Sichuan Province Revised Injection Mold Design and Flow Analysis Based on Pro/E A Smart Wiper System Based on Feedforward-Feedback Composite Controller The Microstructure and Electrical Property of Porous Cu Film on Soft PVDF Substrate Analysis of Seismic Response of Heterogeneous Media: A Physical Modeling Study The Dynamic Response and Sensitivity Analysis of the SFD-Sliding Bearing Flexible Rotor System Calculating Hydrogen Absorption on Single Wall Carbon Nanotubes with Different Radius Using the First Principle Assessment of Road Safety Barriers and their Effects on the Fatal Injuries Reduction in Iran Analysis of Leveling Control System via Iterative Linear Matrix Inequalities with Full Order Observer Study on Construction of Strategic Alliances of Procuring Agricultural Means of Production A Novel USB Key Design with Online Emulation Debugging Functions Impedance Matching between Signal Generator and Piezoelectric Transducer Automatic Flight Control of Unmanned Helicopter Based on Nonlinear Model Numerical Simulation of Peak Overpressure and Positive Pressure Time of Explosion Shock Wave in the Air Optimal Design of LQR Controller for Single Inverted Pendulum Research on the Customer Characteristic-Driven Innovative Design Method for Glasses Nonlinear Heat Conduction in Materials with Temperature-Dependent Thermal Conductivity Using Hybrid Finite Element Model Research of Grain Moisture Measurement Method Based on Pressure Sensor Finite Element Analysis of Mandible Reconstruction Plate in the Case of Symphysis Fracture Numerical Investigation of Effect Pilot Injection on Combustion Noise and Exhaust Emission of Diesel Engine Outline Extraction from Triangular Meshes Based on STL Files, VC++ and OpenGL First Principles Calculation on Adsorption of S on Impurity Fe (100) An Automatic Information Extraction Method Based on the Characteristics of Patent Facade Furnishings- Preliminary Study on the Art and Culture of the Chinese Doorknocker Decoration On the Design and Analysis of Acoustic Horns for Ultrasonic Welding Vibration of Lifting Rope when Cage Is Locking A New Numerical Algorithm for Transmission Error Measurement at Gears Meshing Design of the System for Online Monitoring Dielectric Loss Properties of ZnS Thin Films Prepared by CBD under Different Concentration of Complexing Agent Fatigue Life Evaluation on the Seam Welds in the Main Rotation Platform of YTQH800 Finite Element Design and Manufacturing Process of Flexible Roller Study of Tool Trajectory in Incremental Forming Electronic Anti-Cut for Automatic High Speed Horizontal Flow Wrapper with ECAM Study on Pulverized Combustion Boiler Co-Generation Belite Q-Phase Cement Clinker from Coal CFD Simulation of the Gas-Liquid Flow on the Ripple Tray Chapter 7: Microwave Processing of Materials Design and Analysis of a Grinding Machine for Back Gouging of Outer Circumferential Weld Theory Simulations of Coaxial Bragg Reflectors with Gradual Change Ripples Study of Numerical Problem Based on the Extended Finite Element Method Study on the Utilization of Digital Elevation Model for Calculation Method of Reservoir Capacity Machining Sequencing Optimization Based on Simulated Annealing Algorithm Chapter 8: Thermal Engineering Theory and Applications Steel Ball Temperature Uniform Distribution Time Calculation Method in Annealing Process Research on Constant-Temperature Drying Test of Cotton Straw and Regression Analysis of Drying Rate Equilibrium Analysis of Hydrogen Adsorption on Activated Carbon Application Research on Lignite Quality-Improving of Pulverized Coal Direct-Fired Stove Optimization of HAVC System with the Utilization of Geothermal Water System by Using High-Temperature Heat Pump and Fan-Coil Method and Application of RBF Network Structure Optimization Influencing Factors on Heat Transfer Performance for Flow Boiling of R410A in Horizontal Micro-Fin Tubes Performance Studying of Cotton Fibers before and after Cationic Modification Design and Study of a Phase Change Micro-Channel Heat Sink Investigation of Conducting Pins in Sphere Filled with Phase Change Material for Enhancing Heat Transfer in Thermal Energy Storage Research on the Influence of Ocean Atmosphere to Infrared Detection Development Trends of Research on Monitoring Wear of Sliding Main Bearing for Diesel Engine A Study of Paddy Heating for Insect Elimination and Improving Milled Rice Quality Chapter 9: CAM/CAE Solving Seepage Problems in Soils using Element Free Galerkin Method Microstructure and Electrochemical Properties of La0.35Ce0.65Ni3.8-XCo0.8MnxAl0.4 Hydrogen Storage Alloys Analysis on Evaluation Method of Macroeconomic Situation Knowledge Base System of Spiral Bevel Gear Based on Design Tree Research of Three-Dimensional Parametric Design System Based on Case-Hardened Machinery Product Theoretical Analysis and Finite Element Simulation of Autofrettage for Extrusion Die Coin Identification Based on Fusion Multiple Algorithms The Research of 2 Degrees of Freedom Vertical Vibration System Modeling for 4-High Hot Strip Mill Stands Study on Preventive Low Temperature Corrosion for Plate Heat Exchanger with Dual-Plate Structure Measurement Data Restoring Method of Shoe Last Based on Numerical Cutting Technology The Research of Scrap Tire Rubber Powder Effect on the Performance of Cracking Mortar Study on the Scanning Entity Reconstruction Method of RP Reverse Engineering Simulation for Hydrogen Absorption on Single Wall Carbon Nanotubes Using the First Principle COE Based on Redundancy Material Defect Modeling of Compound Errors for CNC Machine Tools Structure and Electrochemical Properties of Spherical 0.3Li2MnO3*0.7Li(Ni1/3Co1/3Mn1/3)O2 Cathode Materials The Analysis and Research about a Mask Design of AES Machining Parameters Optimization for Form Milling the Gear Using Improved Harmony Search Algorithm Mechanical Properties of Hydrogen Functionalized Graphyne - A Molecular Dynamics Investigation Parameters Optimization about Precision Milling Titanium Alloy TC4 Used for Aviation 3.5m Head Sheave Finite Element Analysis Phase Transitions in Systems with Finite Number of Atoms Study on the Reaction and Thermo-Physical Properties of PC and PBT Blend Catalytic Effect of Triethylamine on the Urethane Reaction of Asymmetry Diol The Research of Inking Installation Based on Virtual Prototyping Technology The Effect of Al-BSF on Seff and Rb in Industrialized Mono-Silicon Solar Cells The Design Principle and Application of Thermally Protected Metal Oxide Varistor TMOV Laboratory Studies on Bearing Capacity of Strip Interfering Shallow Foundations Supported by Geogrid-Reinforced Sand Research on the Influence of Conical Anvil on Upsetting Process of Forging by Finite Element Simulation The Application of CLS Algorithm in the Quantitative Analysis of Lime in Wheat Flour by NIR Spectroscopy Study on Biodegradable Behavior of Polyesters in the Soil of FuJian Local Dynamics Behaviors Analysis on the Column of Gear Grinding Machine Study on Behavior of Carbonitride in Nb Micro-Alloyed Steel in CC-HR Region Numerical Simulation for Geotechnical Material of Mine Stope by Mechanics and Deformation Performance CNC Machining Simulation of Discharge Electrodes to Fabricate Models of DVD Boxes Optimal Design of Dynamic Secondary Cooling of Continuous Casting In Situ FT-IR Studies on the Urethane Reaction Kinetics of 1,3-Butanediol in Nitrogen-Contained Solvent Fatigue Test and Analysis on Subframe in Fuel Cell Car Numerical Simulation of Semi-Solid Die Casting of Housing Cap Earing Application of Radial Basis Function Neural Network to Support Concept Evaluation The Multi-Objective Optimization Design of Vehicle Suspension System Based on ADAMS Influence Factors Study on the Properties of Epoxy Resin Modified by Polyurethane Power Consumption Analysis of Polymer Solids Discharging Process in Vane Plasticization Extruder Numerical Simulation of Temperature Field for TIG Welding of Aluminum Alloy Sheet Based on the SYSWELD Sintering of High-Density AlN Ceramics at High Pressure The Strategies of Energy Control of Parallel Hybrid Electric Vehicle and the Simulation Analysis of Energy Saving Efficiency Fabrication and Construction of Large Scale Aluminum Target Chamber for SGIII Studies on the Anatomical Structure of Fast-Growing Toona ciliate W/O Microemulsion Preparation of ZnSe Nanometer Materials Characterization Double Closed-Loop Motor Modeling and Analysis for Lunar Rover Simulation The Influences of Strain Rate on the Mechanical Behavior of Paper Honeycomb Study on the Relationships between the Optical Density and Ink Film Thickness Based on the Offset Overprint Trapping Computer-Assisted to Personalized Excision of Bone Tumor and Precise Bone Reconstruction The Fluid Power Control Performance Comparison Study of Two-Type ER Valve Based on FLUENT Numerical Simulation for Heat Transfer Process of Clinching with Magnesium Alloys Numerical Simulation on the Parallel Combined Nozzles of Mini/Micro Gas Flow Standard Device Numerical Simulation of the Effect of Feedstock Shape on Continuous Extrusion Process Design and Optimization of Runner and Gating System for Magnesium Piston Casting through Numerical Simulation Study on Modeling and Simulation of Wire Vibration in WEDM Simulation on Steel Solidification and its Shrinkage in Mould of FTSC Slab Finite Element Optimization Design on the Back Frame of the Jaw Crusher PC5282 Numerical Simulation of Upsetting Process of External Upset Tubing Numerical Simulation of Rock Fragmentation Process for TBM Cutters Based on Three-Dimensional Dynamic Fracturing Method Numerical Simulation and Experimental Study of Jet Distance in Abrasive Waterjet Polishing Weaving Process Scheduling Method Based on Ant Colony Algorithm A Study on Preparation Mechanism and Technology Law of Quartz Nano-Powder Static and Dynamic Characteristics Analysis of a High Speed CNC Lathe Feeding System Molecular Simulations of Hydrogen Storage on Several Nanoporous Zeolites The Structure Optimization Design of Cutting Disc of Defibrator Based on Monte Carlo Method Application Research on PDM in Heterogeneous Data Source of Ship Collaborative Design CNC Transformation of X502 Milling Machine Study On Simulation Of The Main Shaft Production Line The Use of Solid Edge in the Classifiers Design Quantitative Analysis of Gas Flow in a Planar SOFC Optimization of Cutting/Tool Parameters for Dry High-Speed Spiral Bevel and Hypoid Gear Cutting with Cutting Simulation Experiment Study on the Parallel Modeling of Spatial Parallel Manipulator Research on the Programming Method Based Process Planning and Kinematics for Mill-Turn Machine Preparation of BCB Powder and its Effects on the Sintering Behaviour and Microwave Dielectric Properties of MCT Ceramics Design of Housing Security Model Based on Family Lifecycle Numerical Investigation of the Influence of Friction, Module and Number of Teeth in Forging Process of a Spur Gear Electrothermal-Chemical Gun Chamber Pressure Measurement System Based on Digital Optical Fiber Transmission Evaluation of Cutting Error in Five-Axis Free-Form Surface Milling for Table-Tilting Type Machine Numerical Simulation and Experimental Studies for High Gas Velocity Electrostatic Precipitator Modeling and Analysis of Manufacturing Variables in the Transesterification Process for Refined Biodiesel Fuels Modelling and Control of Harmonic Drive Applied in Control Moment Gyros Investigation on the Strength Analysis of Vacuum Tank Double Scale Coupling Model of Plastic Injection Molding Model Establishment and Simulation of Vehicle Handling Stability Using Adams/Car Research of Modeling and Simulation for Warp-Knitted Fabric The Study of the Relation between Clearance and Fine-Blanking Quality Study of the Fault Diagnosis Method Based on Wavelet Time and Frequency Analysis Studies on the Growing Characteristics of Synthesized Diamond in the System of FeNi-Ti The Error Estimation for 5-Axis Spindle-Rotating CNC Machine Tool Research on 3D Modeling and Virtual Assembly of Quayside Container Crane Study on Performance Evaluation of Multi-Station Assembly System Based on Stream of Variation The Preparation of Nitrogen-Doped Nano-TiO2 for Self-Cleaning Fabric Numerical Simulation and Impeller Optimization of a Centrifugal Pump Effect of Mechanical Stresses on the Coercive Force of the Heterophase Non-Interacting Nanoparticles Mechanical Behavior of Fracture Filled with Variable Medium Nanoindentation Test and Stress Fields Simulation of Hot-Pressed Silicon Nitride Ceramic Molecular Dynamics Simulation for Crack Propagation in Magnesium Alloy Simulation of Indoor Environment Monitor Calibration Gas Mantle Based on FLUENT In Situ FT-IR Studies on the Amine-Catalyzed Urethane Reaction Kinetics of 1,3-Butanediol Optimum Design of Drive Project in Lathe Speed-Change System Simple Algorithm of Wavelet Decomposition Depth and Program Realization Application of Genetic Algorithm in the Study of Semantic Modeling Design of CNC Machine Tools The Mathematical Model of Welding Process Comparative Study of Identification Method Kinematics Analysis of Heavy Dump Truck Lifting Mechanism Simulation and Experimental Research of Disc Brake Numerical Study on the Delamination Onset in Drilling Composite Materials Compact Reflection Bragg Grating Based on Metal-Insulator-Semiconductor Structure Improving Design of Cricoid Plastic Gating System Based on Moldflow Research of 3D Parametric Design System of Gear Based on SolidWorks Internal Contour Extraction Algorithm Based on Quadratic B-spline for Images of Hot Long Shaft Forgings Tardiness Scheduling with Fuzzy Processing Time Using Tabu Search Temperature Dependence of the Morphology and Fluorescence of Eu 3+-Doped in LaPO4 Nanowires Erosion Mechanism of Platen Heating Surfaces in CFB Structure Learning of Bayesian Network Using a Chaos-Based PSO Numerical Simulation Life Prediction of Alu- Alloy Die -Casting Dies Chapter 10: High-Speed/Precision Machining and Inspection Technology Fault Detection of a High-Speed Electric Spindle Study on the Magnetic Flux Leakage (MFL) for Fillet Weld Design of Dual-Channel High-Speed Data Acquisition Card Based on USB 3.0 and FPGA A Yard Allocation Strategy for Export Containers Based Knowledge AOI Multi-Core Parallel System for TFT-LCD Defect Detection Profile Study of Formed Milling Cutter for Screw Based on Non-Instantaneous Envelope Method Research on the Roughness Model of Aspheric Surface with Parallel Grinding Method The Research of CNC Processing Analysis and Feed Rate Determination of Scroll Compressor's Type Line Development of an Economical Lapping Process Design and Fabrication of the Superabrasive Grinding Wheel with Phyllotactic Pattern Development of a Three-Degree-of-Freedom Parallel Workpiece Table for Ceramic Grinding Application of Offline Programming in CMM Automatic Measurement Method of Volumetric Error Compensation for 3-Axis NC Machine Tool Design and Analysis of the Multi-Microchannel Aerostatic Restrictor Preliminary Analysis of Sustainable Design Management for LSPB Chapter 11: Micro-Machining Technology Receptance Coupling for Micro-End-Milling The Fabrication and Inspection of a Microball Made of Optical Fibre for Micro-Nano Coordinating Measuring Machine Research on Micro EDM Machine Tool for Machining Micro Array Holes Novel Additive for Alkaline Texturing of Mono-Crystalline Silicon Kinetic Study of PZT Inertial Micro Rotary Actuator Influence of the Key Factors on the Wall Slip Phenomenon in Micro Flow The Mechanism of Surface Trajectories and Milling Forces in Micro-Milling Processing A Simulation Study on Rod Electrode Wear in Micro-EDM Investigation on Laser Etch-Machining Underwater Based on Thermal-Mechanical Effect Multi-Resolution Analysis of Critical Dimension Line Edge Roughness Model Building and Interface Friction Research of Micro Cutting The Deposition and Removal Process for Micro Machining Based on Electrical Discharge Synthesis of CdMoO4 Microcrystals by a Molten Salt Method Study on Application of VSI Q Control Chart in Small-Batch Detection An Improved Genetic Algorithm For Just-In-Time Job-Shop Scheduling Problem Chapter 12: Laser Processing Technology Embedded System for PCB Soldering Platform Controller Design Contrast Test of KOH Solutions Jet-Assisted Laser Etching on Al2O3 Ceramics Theoretical Analysis of Laser Shock Bulging Forming Grouping Parallel Filling Scan Path Generating Algorithm of Metal Laser Deposition Shaping An Integrated Technology for 3D Laser Marking Improving Manufacturing Management with Activity Based Costing Improving Thermal Shock Resistance of Plasma-Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings by Laser Remelting High Power Diode Laser for Processing Experimental Study on Laser Plasticizing Polyamide 12 Optimization on Selective Fiber Laser Sintering of Metallic Powder The Surface Absorption Coefficient of S304L Stainless Steel by Nd:YAG Micro-Pulse Laser Chapter 13: Bionic Mechanisms and Bio-Manufacturing Fabrication of Minitype Cutting Tool Based on the Electrode Dressing Technique An Assessment of Cutting Force for Dental Implant Drilling Hydraulic Pressure Control System Simulation and Performance Test of Lower Extremity Exoskeleton Clam Shell Compression Characteristics and Bond Strength Finite Element Analysis of Deep Transverse Metatarsal Ligaments Mechanical Response during Landing Design and Analysis on the Increasing Friction Mechanism of the Convex-Hull-Typed Bionic Driving Drum Design and Fabrication on the Electroplating Polishing Pad with Phyllotactic Pattern The Research of the Athletic Relationship between Knee and Ankle Based on Back-Propagation Network Chapter 14: Virtual Manufacturing and Network Manufacturing Influence of Ladle Purging Plug Airway on Flow Properties of Liquid Steel Research of the Flow Sampling Algorithm Research on the Knowledge-Based Multi-Dimensional Information Model of Manufacturing Capability in CMfg Virtual Shaping Design of Single Snowmobile Marketing Policy Based Service Composition Model for Supplier Selection in Network Manufacturing Implementation and Development of a Collaborative Design Platform for Heavy Trucks Efficient Collision Detection Based on Hybrid Bounding Volumes Study on Product Family Architecture Dynamic Evolution Based on Product Instances Research on the Group Collaborative Mode of CSCW Key Issues for Cloud Manufacturing Platform Directed-Weighted Modeling of Resource Node in Manufacturing Grid and Its Application Analysis Chapter 15: Remanufacturing Engineering Protection & Coordination of Pharmaceutical Safety Responsibility Based on TPL Research on Remanufacturability Index System and Evaluation Method of Electromechanical Products Study on the Casting Defects of Vermicular Cast Iron Brake Disc and the Countermeasures Design of Autonomic Logistics Information System Based on System Integration Model Study on the Microstructure and the Mechanical Properties of TA2 Parameters Performance to the Vibration Isolation in Three-Dimensional Elastic Floating Raft Isolation System Analysis on the Influence of the Re-Circulation Mechanism's Position on the Friction Torque Fluctuation in Ball Screw Economic Evaluation of Remanufacturing End-of-Life Electromechanical Products Research and Application of Combinational Demulsifier Chapter 16: Sustainable Manufacturing Technologies Synthesis of Double Alkyl EO/PO Random Copolyethers with KOH Catalyst The Preparation and the Research on Self-Cleaning Coating Reliability Analysis Based on Long Flatcars Visual Monitoring System of Steel-Cord Conveyor Belt Study on Electrophoretic Deposition Characteristics of Ultra-Fine Diamond Powder Study Affection of Nano-Al2O3 Additive on the Corrosion Resistance of Micro-Arc Oxidation Film of Titanium Alloy TC4 The Simulation Analysis of Ball Screw Pair Contact Characteristics Based on ADAMS Vibration Analysis of Radial Drilling Machine Structure Using Finite Element Method Strength and Modal Analysis of Thin-Shell-Structured Vessel with Rib Reinforcement CFD Study of Wake Interaction of Two Wind Turbines Study on the Microstructure and Mechanical Properties of 15CrMoR Methodology for Calculating Energy Consumption of a Machining Process The Linear Sweep Voltammetric Study and Two-Step Electrodeposition of CuIn 0.95 Se2.1Thin Film in a Citric Acid Electrolyte The UWB Signals of Power Spectral Density Tribological Characteristics of Nanostructrued Ceramic Coatings Deposited by Plasma Spraying The Effect of Surface Finish on Zinc Whisker Growth Stiffness Performance Simulation and Testing of a New Type Integrated Suspension Strut Mechanical Design for Enhancing Anti-Impact Capability of Dispersing Information Detecting Robot Study on Method of Planning the Plane Maintainability Test Based on the Development Test Researches on Aluminum Coating by Flame Spraying on Q235 Steel Surface Study on Microstructure and Wear Properties of (Ti,W)C/Fe Surface Composite Coating Study on Properties of High Strength Steel during Warm Roll Forming Research on Workflow Model with Component Based on XPDL The Research about EDTA Plating Solutions of Non-Cyanide Copper Plating The Traditional Dyes and Design Types of Uyghur Traditional Decorative Felt Novel Packaging Material for Mango Transportation Transverse Vibration Analysis of Buried Pipeline under Fluid-Solid Coupling Interaction Ultranarrow Gap Welding with Constrained Arc by Flux Strips The Development of Novel Electrolyte Membrane with High Proton Conductivity at Medium Temperatures A Linear Piezoelectric Linear Motor Driven by the in-Plane Longitudinal and Bending Vibrations of an H-Shaped Vibrator Preparation and Characterization of Liquefaction Polyol of Wheat-Straw Lignocellulose The Influence of Zirconia Substrate Temperature on the Microstructure and Adhesion of Deposited Mg Films Thermal Analysis on Machine Tools and Research on Time Parameters of Machine Thermal Equilibrium The Formation of Adiabatic Shear Band and Analysis of its Characteristics in the Process of Penetration The Study of Wireless Measurement System for Neuro-Motor Reaction Time Tribological Performances of Active Screen Ion Sulphurized Layer under Epinoc Grease Lubricating Research on Three Dimensional Design of Cavity of Injection Molds of Involute Plastic Gears The Structure Design and Dynamic Characteristic Simulation Analysis of Electric Spindle Using the PC Grinder of Ceramic Ferrule Synthesis on Modified Chloroprene Rubber Adhesive Dedicated to Bonding UHMWPE and 45# Steel Research on Dynamic Characteristics Analysis of the Whole Grinding Machine Tool Based on FEM Wealth Distribution in a Local-World Network The Pressure Transmission Properties and its Application of Composite Powder between the Silica Powder and Hexagonal Boron Nitride Research on the Carbides of Its Alloying Layer Conducted by W-Mo-Y Surface Alloying and Carburizing Process Study on Reconstruction for Turbine Blade Surface Using NURBS The Improvement of Anticorrosive Technology for Pipeline in Panjin Oilfield Structure and Properties of Variant Aramid Fibers Research on Green Supply Chain's Coordination Based on Knowledge Spillover Effect Study on Grinding Mechanism of BCB Grinding Wheel Study on the Thermal Errors of CNC Machine Tools The Organization and Microhardness of the Coating of Aluminum Alloy after FSP Study on Ni-P-Nanometer Diamond Composite Electroless Plating for 2A12 Aluminum Alloy Research on Error Sources Caused by Servo Feed in Cam Grinding Study on Non-Cyanide Silver Electroplating with Copper Substrate Stability Analysis in a Delayed Predator-Prey Model Study on New Technology of Removing Abandoned Tobacco Zinc Plate Coating by Using Mechanical Method Research on Renitrocarburizing of Mechanical Element The Fatigue Life of Plan Coil Spring Forecasts Based on Potential Boundary Element Surface Modification of Poly(ethylene Terephthalate) (PET) with UV/Nano-TiO2 Study on Dynamic Strain Aging Phenomenon of AZ91D Magnesium Alloy Chapter 17: Digital Manufacture and Management Research on Algorithm of Springback in Sheet Metal Forming The Integrated Digital Manufacture of Airplane Duct Based on through Process and Three Dimensional Modeling Assistant Decision Modal of Rapid Product Quoting for Mass Customization A Time-Series Trend Forecast Method Based on Principal Component Analysis Discussion on the Utilization of Forestry Resource Data to Update Basic Geographic Information Data Automatic Processing System of Welding Spots in Auto-Body Welding Lines Design of EFL Control System for 950 Motorcycle Based on MCU Internet Technologies and Construction Management Enterprise Collaborative Management System Design for Dynamic Alliance The Product Structure Evolution Model for Maintenance Based on Finite Automaton Process Modeling of Virtual Enterprises Partner Selection Based on Petri Net Chapter 18: Quality Monitoring and Control of the Manufacturing Process Research Review of Relationship between TQM and Organization Innovation Positioning Error Compensation for Machining Center Based on Spline Interpolation Forecast Research of Diamond Grinding Parameters Based on Multi-Variable Grey Model Automatic Defect Detection of Yarn-Dyed Fabrics Based on Energy Fusion and Local Binary Patterns Computer Control System Development for the New Type Pilot Cold Rolling Mill Online Estimation System of Grinding Wheel Status Based on D-S Evidence Theory Research of Grinding Wheel Wear Modeling Based on Hypothesis Test Principle Control and Optimizing of Unstable State in Continuous Casting Process with Automatic System Research on Self-Tuning Fuzzy PID Control Strategy of Metallurgy Furnace Temperature Innovation on Quality Control: Case from Chinese Biggest E-Commerce Platform Operator Fuzzy Control of Printing Color Quality Based on Genetic Algorithm Research about Warm-Hot Forming Process Control of LTWB Auto B-Pillar Differential Roll-Scanning Technology for Accuracy Measurement of Fine-Pitch Gears A Method for the Automatic Registration of Hull Blocks Point Clouds Optimization of Enzymatic Skinning of Catfish Nuggets Using Response Surface Methodology Chapter 19: System Analysis and Industrial Engineering The Application of Modern Industrial Engineering in Small and Medium-Sized Enterprise Management Overview of Computer Simulation Modeling Platforms Based on Multi-Agent Study of Table Tennis Training System A New Type of Semiconductor Laser Power Supply Efficiency Evaluation of Resources Value Flow Based on Circular Economy for Coal-Fired Power Plant The Layout Optimization of the same Size Operating Unit in the Facility Based on Quantity Maximization Habit Formation, Equity Premium and the Evidence of Chinese Market Research on Element Model of Enterprise Network Influence Analysis of Linear Data Distribution on Different Clustering Results Design & Measure RUP Development Case Using the Zachman Framework as an Aid The Ordering System of Technical Objects Based on Meta Object Facility Fuzzy Group Multi-Criteria Decision-Making on Selecting & Evaluating of AMT Space Properties of Effects of Slope Stability by Underground Mining A Numerical Method for Solving Bilevel Optimization Based on Moving Space Response Surface The Study of Assessment on the Environmental Adaptability of Weapons and Equipment The Assessment of SoS's Structure Based on the MCSP Ergonomic Evaluation of Adjustable Care Beds in Passive Motion Procedure Research on the Blind Area in the Display Zone of the Automobile Dashboard Study on Evacuation Strategy in High-Rise Buildings Fire Quality Cost Analysis Based on PVA and EVA Chapter 20: Production and Operation Management Yard Allocation for Coal Terminal Based on Rules Research on Manual Scheduling Technology Using the Pattern of Human-Computer Cooperation Difficulties of E-Commerce Application in Small and Medium Enterprises Researches on Joint Distribution in Urban Logistics Internal Capabilities, External Competition and Firm Performance: A Case Study for an Accelerated Internationalization Firm in Manufacturing Simulation of Stock Strategies in Dynamic Supply Chains Research on Professionalized Operation and Management Model for Large and Medium Biogas Projects Design and Implementation of Heavy Container Handling Equipment Maintenance System The Influence Factors Analysis on Response Speed of Agile Supply Chain Enterprise Inventory Control Based on Supply Chain Management PMIS Service Providing through SaaS Structure Mass Customization Based on Energy-Saving Concept - In the New Economic Era as the Background The Effectiveness of Environmental Regulation on Manufacturing Productivity in Jiangsu Province Research on Planning of Hybrid Hot Charge Rolling Base on Specific Reheating Furnaces Maintaining Manufacturing Viability in Difficult Times with the Balanced Scorecard Integrated Production-Inventory Model in a Multi-Echelon Closed-Loop Supply Chain with Product Returns Supply Chain Coordination Mechanism Based on Lead-Time Compression under Elastic Demand Productivity Growth in Chinese Construction Industry Considering Solid Wastes Generation Design the Real Estate Industry Value Chain Based on Multidimensional Reconstruction A Study on the Configuration of Handling Equipments for Container Terminal Optimizing Pull Production Systems with Cost Objectives by Modified Memetic Algorithm Solving Lot-Sizing and Sequencing Integrated Optimization Problems in Mixed-Model Production Systems Research of Stochastic Control on Aviation Supplies Inventory The Conservation Methods of Ancient Lu Embroidery Fabric Chapter 21: Green Supply Chain The Impact of Manufacturing Firms' Green Supply Chain Management on Competitive Advantage Greening the Housing Supply Chain in China Sustainable Supply Chain Management: A Case Study From Indian Automotive Industry Based on Fuzzy Math Method to Evaluate of Reverse Logistics of Waste Automobiles Study on Green Supply Chain of Chinese TV Industry under Circular Economy Designing Reverse Logistics Networks New Approach for Researching Forest Ecosystem Bi-level Program on Competitive Location of Logistics Distribution Center Research on Selection of Third-Party Reverse Logistics Supplier Based on Fuzzy Analytic Hierarchy Process Method A Dynamic Game Model of Reverse Logistics for End-of-Life Electronic Products Based on Complete Information Chapter 22: Manufacturing E-Commerce System The Application of Smart Vehicle Deployment System in Asphalt Concrete Factory Voronoi Diagram Based Retrieval Method for the Internet of Things The Design and Realization of ERP System for Staff Training Study on Service Architecture and Information Platform of Supply Chain Logistics Based on Service Chain Research of Tobacco Sorting System and Equipment Based on the Internet of Things The Preparation and Visible Light Photocatalytic Activity of ZnO-TiO2 Nanofibers A Study on Family Medical Sensor Networks and ECG and Temperature Monitoring Node Based on 6LoWPAN Efficient Mining of Skyrank Items in Recommender Systems Tmall Incident - A Legal Problem or Business Operation Dispute

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB09099256
• ISBN:
  • 9783037853702
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 4 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058