New materials and processes : selected, peer reviewed papers from the 3rd international Conference on Manufacturing Science and Engineering (ICMSE 2012), March 27-29, 2012, Xiamen, China
Author(s)
Bibliographic Information
New materials and processes : selected, peer reviewed papers from the 3rd international Conference on Manufacturing Science and Engineering (ICMSE 2012), March 27-29, 2012, Xiamen, China
（Advanced materials research, v. 476-478）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
This comprehensive work contains up-to-date information, gathered from all over the world, concerning state-of-the art manufacturing science and engineering, focusing on New Materials and Processes. The 534 peer-reviewed papers are grouped into 16 chapters: Non-Ferrous Metallic Materials; Iron and Steel; Micro/Nano Materials; Ceramics; Optical/Electronic/Magnetic Materials; New Functional Materials; Building Materials; New Energy Materials; Environment-Friendly Materials; Earthquake-Resistant Materials and Design; Biomaterials; Smart/Intelligent Materials/Intelligent Systems; Polymeric Materials; Thin Films; Mechanical Behaviour and Fracture; Tooling, Testing and Evaluation of Materials.
Table of Contents
Preface, Sponsors and Committees
Chapter 1: Non-Ferrous Metal Material
Damping Properties of AZ91D Magnesium Alloy with Y Addition
Study of Duplex Ageing Treatment of AZ80 Magnesium Alloy after Deformation at Room Temperature
Effect of the Grain Size on Electrochemical Corrosion Behavior of Cu60Ni20Cr20 Alloys in Solutions Containing Chloride Ions
Preparation of Spherical Nanometer ZrO2 Reunion Powders via Single Emulsion Assisted with Homogeneous Precipitation
The Preparation of Rapidly Solidified and Powder Metallurgy AZ91 Alloy
Research on Forming Process of Anodic Oxide Film of AZ91D Magnesium Alloy
Fracture Characteristic of a Mg-Gd-Y Alloy Compressed at High Strain Rate and Sub-Zero Temperature
Effect of Aging Condition on the Mechanical Properties of an Al-Cu-Mg-Ag Alloy
Effects of Hot Deformation Process on the Microstructure and Hardness of AZ80 Magnesium Alloy
Development and Application of a New Carburant Material
Influence of Annealing Treatment on Precipitation of -Mg17Al12 Phase of AZ80 Magnesium Alloy
Microstructure and Strengthening Mechanism of Natural Aging of TZS88 Aluminum Alloy
Microstructure and Texture of Rolled Cu-0.2wt%Cr-0.5wt%Zr-0.1wt%RE(La)
Cellular Automaton Simulation and Experimental Observation of the Dynamic Recrystallization of Titanium Alloy TC11 with Varied Strain Rates
Effect of Temperature on Impact Properties of ZA27 Alloy
Effect of Al on Microstructure and Mechanical Property of NiAl-Mo Alloyed with Nb
Crystallization Behavior of Mg60Ni23.6La16.4 Metallic Glass
Formation Enthalpies of Yellow Gold Alloys with RE Addition Calculated with Chou' Models
Study on Simulation and Visualization of Microstructure
Slow Cooling Treatment of High-Alloyed Superalloy
Effect of Nd on Structure and Properties of Hypereutectic Al-Si Alloys
Effect of the Solid-Solution Treatment on the Die-Casting Structures and Properties of Commercial RE-AZ91 Mg Alloy
Effect of Compound Modification on Microstructure and Properties of High Silicon Aluminum Alloy
Influence of Overburning on Microstructure and Property of 6061 Aluminum Alloy
In Situ Fabrication and Microstucture of ZrB2 Particles Reinforced Aluminum Matrix Composites
Chapter 2: Iron and Steel
Action of Magnesium on Carbide Spheroidization in Annealed Bearing Steel
Calculation Model of Mass Action Concentrations for CaO-MnO-FeO-SiO2-MgO-Al2O3 Slags Based on the Ion and Molecule Coexistence Theory
Effect of the Non-Equilibrium Solidus Temperature on Length of Soft Reduction Zone
Research on the Microstructure and the Growth Mechanism of Oxidation Film of T91 Steels after Service
Effect of Vanadium on the Separate Out of Intragranular Ferrite
Optimization of Flow Control Devices in a Stainless Steel Tundish
Research on Smelting Vanadium Steel by Silicothermic Reduction Direct Alloying with V2O5
Study on Non-Metallic Inclusion in 82B Steel Continuous Casting Billet
The Study on the Orderliness of Change of Microstructure and Mechanical Properties in Simulating the Heating Process of Bending of X80 Pipeline Steels
The Optimum Microstructure of Reheated X80 Bend Pipes
Thermodynamics Analysis of Clogging of 409 Stainless Steel
Effect of Alloy Addition on Mechanical Properties and Decarburization Sensitivity of Spring Steel
One-Step Method of Carbon Thermal Reduction and Nitride to Produce Vanadium Nitrogen Alloy
Smelting Cleaness Control of Supercritical Rotor Steel 30Cr2Ni4MoV
Thermodynamic Calculation of Microalloy Precipitation in Austenite Region for Fe-C-N-Al-Ti-Nb Steel
The Influence of Microstructures on the Corrosion Properties of X80 Pipeline Steel in Near-Neutral pH Soil
Influences of Adding Aluminum on Inclusions in H13 Steel through P-ESR
Development and Performance of Water Soluble Salt-Resistant Polymers for Chemical Flooding
Enriching Valuable Elements in Tailings Re-Concentration of Bayan Obo Mine by Direct Reduction
Effect of Continuous Annealing Parameters on the Microstructure and Magnetic Property of Cold Rolled Dual Phase Steel
Detecting the Way of the Intake-Port Wall-Film Entering the Cylinder
The Oxide Inclusion, Microstructure and Properties of Low Alloying Steels
Effect of Corrosion Inhibition on the Stress Corrosion Cracking of UNS S31603 Austenitic Stainless Steel
The Effect of Trace Boron on Corrosion Resistance of the Casted 0.04C-16Cr Ferritic Stainless Steels in H2SO4 Medium
Rust Layer Structure Analysis of Q235 Atmospheric Corraded in Tangshan Industrial Estate
Research on Reduction Dearsenication in Molten Iron (Steel)
Solubility Product of MoC with NaCl Type Cubic Crystal Structure in Iron
The Design of High Precision Temperature Control Circuit for DFB Laser Diode
Optimization of Weir & Dam with Drain Holes in Continuous Casting Slab Tundish
Basic Research on Reduction Characteristics of Niobium Compounds in CaO-SiO2-Al2O3 Slag
Study on Polycyclic Aromatic Hydrocarbons Distribution during Single Coal Coking
The Assessment of Work Hardening Behaviour of Dual Phase Steels with Coarse Martensite Islands
Effects of Boron Addition on Undercooled Austenite Transformation of Low Carbon Mn-Nb Steels
Effect of Microstructures on Corrosion of X80 Pipeline Steel in an Alkaline Soil
Effect of Mo and Ni Content on the Mechanical Properties of Low Carbon and Alloy Steel Casting Sample for Coal-Mining Machinery
Comprehensive Influence of Cr and Si on Hardness and Wear Resistance of Cold Roll Steel
A Desulphurization Mathmatical Model for Single Snorkel Refining Furnace
Creep-Rupture Properties and Life Evaluation of Low Hardness Modified 9Cr-1Mo Steel
Microstructure and Mechanism of Three Spheroidizing Treatment for the Carbide of GCr15 Steel
Recovery of Copper and Cobalt from Spent Aerospace Material with Pollution-Free Oxidant
Chapter 3: Micro/Nano Materials
Influence of Sealing Methods in the Failure Behavior of Fabricated Composite in Ozone Gas Environment
Preparation and Mechanical Property of PLLA/Nano-SiO2 Composite
Research on the Applications of Internet of Things Technology in Cultural Heritage Preservation
Study on Optimization of Machining Parameters in Electrochemical Machining
Alumina (Al2O3) Nanofibers from Electrospinning
Review of the Research on Evaluation of Livable City
Role of Aluminum (Al) Thin Film in the Improvement of Anti-Permeation Behavior of Fabricated Composites in Corrosive Environment
Tool-Workpiece Temperature for Continuous and Interrupted Cutting of ASSAB 760 Steel with Dry Machining Process
Investigation on Properties of Electroless Ni-P-W/Al2O3 Composite Coatings Deposited on Sintered NdFeB Permanent Magnet
Crosslink Effects of Octavinyl Polyhedral Oligomeric Silsesquioxane on the Mechanical and Thermal Properties of Polyacrylate Nanocomposites
Analysis of the Dynamic and Static Load of Light Sport Aircraft Composites Landing Gear
Study on the Dyeability and Hygroscopicity of Polypropylene/Cellulose Acetate Butyrate Fibers by Melt Blending
Study on the Shearing Characteristic of the Epoxy Resin Matrix Composite Enforced Promiscuously by SiC Nano Fiber and Twaron Staple
Effect of Constituents of EPDM/PVC Composite on Damping Capacity
Research of Ultrasound and Electromagnetic Field on the Microstructure of Cast-Rolling Magnesium Strip
Comparison on the Compositions, Microstructure and Hardness of Super Large Section Prehardened Steels for Plastic Mould Block
MD Simulation of Chip Formation in Nanometric Cutting of Metallic Glass
Design and Simulation of Drum Solid-State Fermentation Equipment Based on Solidworks
Modified Gelatin-Based Cell Assembling Process Using Glycerin
Numerical Simulation on Effect of Nozzle-Hole Layout on Spray Characteristics and Combustion in a DI Diesel Engine
Quantitative Analysis of Inclusions in Aluminum
Fabrication and Characterization of Hydroxyapatite Nanocomposites Based on Bacterial Cellulose with Surface Modification
The Study on the Change of Sheer Strength Characteristic Parameter and Soil Nail Firmness of Effect in the Condition of Freezing-Thaw Cycling
Effects of Magnesium Aluminate Spinel on the Properties of Al2O3-SiC-C Castables for Blast Furnace Iron Trough
Effects of the Z Value on the Properties of -Sialon/ZrO2 Composites
A Model for the Films Formation of Nb-Si-N Ternary Compound Deposited
Effect of Carbon Content on Preparation of Vanadium Carbide Nanopowders by the Carbonization of the Precursor
Synthesis of Silver Nanoparticles through Two-Phase Reaction by the Reduction of N, N-Dimethylformamide
A Study on Face Strain and Interlaminar Stress of Bamboo Plywood
Effects of Technological Parameters on Properties of Ni Film Prepared by Supercritical Carbon Dioxide Emulsion
Accurate Faraday Measurement System for PBB Glasses in Current Transducer Application
Preparation and Characterization of MAO Film with High Dense Layer
Application of Centroidal Voronoi Diagram in Numerical Model of Microforming Process
Effect of Pd on CH4 Reforming with CO2 Catalyzed by Ni over Mixed Titian -Alumina Support
Study on Mechanical Properties of PEEK Composites
Study on the Interface Parameters of Composite Materials with Consideration of the Effect of Thermal Stresses
Comparative Study the Effect of Different Raw Powder on Foaming Process during Sandwich Rolling
Managing B2B-Supply Chain with Option Contract under Disruptions
Research on Segregation at Interface in Al2O3/Al-Cu Composites
Predictive Control of DC/DC Converter Based on State Observer
Thermodynamic Application of Predicting the Effect of Trace Element of Ag on Reinforced In Situ Particles in Al-Cu/TiB2 Composites
The Effect of Nano-Aluminum on Morphology and Properties of Polyimide Matrix Composites
Abrasion Behavior of WC Reinforced Cast Iron Surface Composite Fabricated by Cast-Infiltration Method
Harmonic Response Analysis of Precision Grinding Machine Bed Made by Artificial Granitic Composite Based on ANSYS
Hydrogen-Induced Wear of Ti-6Al-4V Alloy
Fabrication Process and Properties of Si3N4-SiC Ceramics by a Two Step Sintering Method
Fabrication of Al-Based Matrix Composite Reinforced with WAl12 Intermetallic Particles by Press-Forming Process Using High-Energy Ball-Milled Powders
Finite Element Analysis of Flexural Property of Short Flax Fiber Reinforced Polypropylene Composites
Failure Analysis of Laminated Composites under in-Plane Compressive Loading
Surface Reconstruction from Unorganized Points Using Graph Cut
The Study on the Thermal Formability of AZ31 Magnesium Alloy Sheets
Mechanical Performance of Composite Laminate with Oblique Splicing Ply
Effects of Interface on Wear Resistance in Fiber Reinforced Composites
Research on Machining Simulation of Large Scale Spiral Bevel Gear Machine Tool
Research Progress in Preservation of Postharvest Edible Fungi
Research and Realization of Hex Nut Standard Parts Library Based on Reusable Knowledge
The Monitoring Elements Structure of Process of Requirement Integrated & Dynamic Espial for Complex Products RMS
Hygrothermal Behavior of T700 and T300 BMI Used for Advanced Polymeric Composite
Graft Copolymerazation of 1-Vinylimidazole onto Poly(vinylidene Flouride) by Radiation-Induced Grafting for Fuel Cells Membrane
Modeling the Welding Process of the Low Alloy Ferritic Steels T/P23 and T/P24
Application of Fuzzy Control in Wind and Solar Energy Storage System
Predictive Maintenance through Condition Monitoring at Diffusion Equipment of a Solar Cell Manufacturing Environment
The Synthesis of Eco-Friendly Silicone-Modified Polyacrylate Pigment Printing Binding Agent
Thermal and Dielectric Properties of Inorganic-Organic Nanocomposites Involving Epoxy Resin and Polyhedral Oligomeric Silsesquioxanes
Development and Application of a New Al-Si-Mg Alloy for Semi-Solid Forming
The Enhanced Electrochemical Performance of Lithium/Sulfur Battery with Protected Lithium Anode
Research on the Machining Methods in Machining Center
Microstructure, Mechanical and Wear Properties Study of Vanadium Carbide Particles Reinforced Iron Matrix Composite
Synthesis and Infrared Emissivity Properties of CdS/TiO2 Composite
The Research on Improving the Salt Resistance of Bentonite Used in Geosynthetic Clay Liner
3D Numerical Simulation of Linear Friction Welding of 45# Carbon Steel
Study on Properties of PEEK Composites Reinforced by SCF
Effect of Intercalated Agents on Thermal Deintercalation of Kaolinite
Preparation of Multi Cage-Like Zinc Oxide Nanopowder with High Specific Surface Area via a Large-Scale Hydrothermal Method
The Brazing of Copper Pipe and Aluminum Pipe Based on the 4R
Dielectric and Magnetic Properties of Sintered Cobalt Ferrite Derived from Nanocrystalline Powders
PP/Wasted PET Fabric Composites Compatibilized by two Different Methods: Mechanical Properties, Morphology and Thermal Stability
Phase and Crystal Structure Evolution of MoSi2-AlCr2 Quasibinary System Alloys
Effect of Ga on Microstructure and Mechanical Properties of the TiCu-Base Nano/Ultrafine Bimodal Structured Alloy
Study on Technology of Ultrasound-Microwave Assisted Improves Preparation of Porous Starch
Local Electric Field Distribution of Graded Cylindrical Composites
Preparation and Characterization Flexible Conductive PPy/BC Nanocomposite Membrane
PHC Pile Bearing Capacity and Application
Preparation and Characterization of Nylon 6/Nylon 6 Clay Fibers
Mechanical Response and Damage Analysis of 3D Multi-Structured Knitted Composite under Quasi-Tensile Loadings
Failure and Broken Criteria for 2.5D Woven Composites Loaded in Weft
Effects of Temperature on Tensile Strength of Carbon Fiber and Carbon/Epoxy Composite Sheets
Value Accounting and Audit the Integrity of the Game Analysis
Spinning Effluents Treatment from Dry-Spun Acrylic Fiber Producing by Integrated Membrane Filtration
Tunable Ferromagnetism above Room-Temperature in Self-Assembled (In,Mn)As Diluted Magnetic Semiconductor Quantum Dots on Be-Doped AlxGa1-XAs Template by Molecular Beam Epitaxy
Destabilizing Effect of Zirconia Products Caused by Aluminum
Development of Cam Design and Simulation System
Preparation and Characterization of Polyaniline / Montmorillonite Composite by Situ Emulsion Polymerization
Antifungal Properties of Ag-SiO2 Core-Shell Nanoparticles against Phytopathogenic Fungi
Preparation, Characterization and Dielectric Properties of BT/PI Film
Low Carbon Economy and Sustainable Energy Development in Rural Areas of Sichuan Province, China
First Principles Study on Rutile SnO2 Improving Gas Sensor Properties of Porous SnO2-In2O3 Composites
On Effect of Microstructure about Bi for AgSnO2 Compositions by Reaction Synthesis
Low Loss Hybrid Dielectric-Metal-Dielectric Waveguides for Sub-Micron Mode Confinement and Efficient Directional Coupling
Preparation and Properties of Long Wheat Straw Fibers Used for Composite
Characterization of an Autoclaved Aerated Concrete Building with Respect to a Similar Unreinforced Masonry Structure
Role of Interface of Epoxy/Clay Nanocomposites and its Effect on Structure-Property Relationship
Synthesis and Characterization of Bacterial Cellulose/Calcium Silicate Composites
A Multi-Degree-of-Freedom System Modal Parameters Wavelet Transform Identification Method
LBM Application in Two-Phase Fluid Flow with Large Density Ratio
Research on the Recognition Technology of Letter String on Label
Fabrication and Characterization of ZnO-Based Nano Hetero Structure by Using a 2-Step Hydrothermal Growth Method
The Research Progress of Soccer Learning Mechanisms for Robot
Magnet Skew Technology Investigation for the Reduction of PMLSM Thrust Ripple
Pass Design Method for Rolling Titanium Alloy Rod
Preparation of Al-N Based Material by Ti-Bearing Blast Furnace Slag
Investigation of Microstructure Characterization and Machinability of the B4C/BN Nanocomposites Bulks Fabricated by Chemical Reaction Process and Hot-Pressing Process
Preparation and Chemical Structure of RIC of PP/ Modified PA66 In Situ Microfibrillar Composite
Chapter 4: Ceramic
A Novel Process to Synthesize NiCoMnO4 Nano-Powder for NTC Electro-Ceramics
Low Temperature Sintering of BaO-ZnO-TiO2 Ceramics for LTCC Applications
Nonlinear Absorption Properties of Spherical Gold Colloidal Nanoparticles
Influence of La2O3-Doping on Dielectric Properties of Ba(Ti, Sn)O3 Ceramics
Reducing Thermal Conductivity of Polymer Derived SiC Ceramics via Microwave Sintering Processing
Decisional Autonomy of Approach and Landing Phase for Civil Aviation Aircraft using Dual Fuzzy Neural Network
Effects of V2O5 Addition on the Microstructure and Microwave Dielectric Properties of ZnNb2O6 Ceramics
Dynamic Modeling and Acceleration Control of Electric Vehicles
Properties of Ni-Cu Bulk Alloy Prepared by Spark Plasma Sintering Technique
Effect of Rb+ -Doping on the Crystallization, Phase Transition and Photocatalytic Activity of Nanosized TiO2 Catalyst
Comparison of Surface Electrochemical Properties between Purple Rocks and their Derived Soils as Related to Pedogenesis
Test and Research on Ratchet Effect of 16 Mn Steel under Cyclic Loading
Dynamics Modeling of Main Rotor Teeterboard Flap on Unmanned Autonomous Rotorcraft by D' Alembert Principle
Study on Morphology and Property of UHMWPE/ PP Blends
Realization of A Data Communication Card for A High Speed Digital Electronic Engraving Machine
Preparation of Dumbbell-Like ZnO Microcrystals and Characterization of their Thermal Radiation Properties
Synthesis of -Bi2MoO6 Spheres and their Photocatalytic Activities for Degradation of Rhodamine B
Mechanical Properties and Heat Treatment Research on Machinable Glass-Ceramic
Synthesis of Au Nano-Particles Using Plasma Sputtering into Oil
Effect of Multiple-Binders on Properties of Al2O3-Based Ceramic Foam Filter
Effect of Solid Content on Performance of Porous Alumina Ceramic by Gel-Foaming
Frequency Conversion Timing to Adjust the Centrifugal Pump Flows
Fault Detection in a Cracked Pipeline Embedded with Piezoelectric Sensors/Actuators Employing Bond Graph Approach
Intracellular Distribution of Iron in the Cell of Magnetotactic Bacteria Inhibited the Biosynthesis of Magnetic Nano-Particles by Limiting the Iron Source
The Influence of Different Surfactants on Morphology of Nano Calcium Sulfate
Effect of Sintering Temperature on Microstructure and Mechanical Properties of Al2O3-TiC-ZrO2 Ceramic Composites
Research on Predicting Model of Surface Roughness for Ground Engineering Ceramics
Thermal Shock of Semi-Infinite Cellular Ceramics
The Positive Temperature Coefficient of Resistivity Effect in (1-x)KNbO3-xBaGeO3 Based Ceramics
Effects of Trammonium Citrate on Slurry of PMN-PZT in Gelcasting Process
Static Corrosion Behavior of Refractory Lining Materials for Magnesium Electrolytic Cell
Sintering Behavior and Dielectric Properties of BZN Ceramics Coated by Precursor Solution of CuSO4
Preparation and Characterization of Manganese Doped ZnO Varistors
TiB2 Ceramic Tool Turning 45# Steel Experimental Study
Effect of Toughening Mechanisms of Crack Bridging on Ceramic Materials
Ethanol Sensor Based on Hydrothermal Method Prepared Porous -Fe2O3 Nanorods
Design and Manufacturing of Large Amusement Devices for Performance and Reliability with Qualitative Reasoning
Analysis of the Current Situation of the Geological Relics Classification System
Chapter 5: Optical/Electronic/Magnetic Materials
Study on Surface Chemical Composition and Structure of PVP/Al Composite Powder Using XPS Analysis
Methods of Maintenance Resources Configuration and Optimization for AMS Based on Effectiveness Evaluation
Mechanical Design and Dynamics Analysis on a Jumping Robot
Synthesis of LiCl Doped Hollow TiO2 Nanofibers via Electrospinning and Their Humidity-Sensing Properties
Near-Infrared Emissions of Sm3+ in Li2O-K2O-BaO-PbO-Bi2O3-Ga2O3 Glasses
Preparation and Microwave Absorption Properties of Glass Beads /Carbon Fiber with Electro Less Ni-Plating
Study on Microstructure and Magnetic Properties of Nitrogen-Annealed Nd-Fe-B Nanocomposite Magnets
Novel Single Walled Carbon Nanotube Based Magnetic-Fluorescent Nanohybrids as Dual-Modal MRI/Optical Imaging Probes
Microstructure Characterization of Ag Nanoparticles Prepared by Hydrothermal Method
Study on Application of Super-Resolution Image Reconstruction Method Used in Video Image Processing
The Research on ODS Iron Powder by Sol-Gel Method
Influence of Pre-Sintering Temperature and Time on the Properties of YIG Target
Study of Electronic and Optical Properties of PbS
Torsion-Impedance in Soft Magnetic Amorphous and Nanocrystalline Wires
Bismuth-Antimony as an Alternative for High Temperature Lead Free Solder
Synthesis of Biomorphic ZnO Using Radish Slices as Biotemplate
An Indirect Boundary Element Method for Computing Sound Field
The Molecular Structures of Alpha-Brominated 2,5-Dimethyl-Terephthalonitrile Derivatives and the Dependences of Their Yields on the Reaction Time
Fabrication of Highly Ordered Carbon Networks as Catalyst Supports for Aerobic Oxidation of Glucose
Effect of Heartwood and Sapwood on Discriminant Analysis of Chinese Fir and Eucalyptus Wood by Near Infrared Spectroscopy
Structure Design and Research on a Spiral Pipe Type Reactor
Synthesis and Luminescent Properties of Doped Europium Complexes with 2, 3 - Pyrazine Dicarboxylate
Preparation of Fe Nanoparticles by Confined Arc Plasma Method
Design and Research on New Type Office Desk
Effect of VC/Cr3C2 Additions on Microstructure and Mechanical Properties of WC-16TiC-XTaC-10Co Ultrafine Cemented Carbides
One-Pot Process for Preparation of Ferrocenylethene Derivatives via Solvent-Free Wittig Reaction
Dynamics Simulation of Rover Locomotion over Lunar Craters
Dynamic Simulations of Rehabilitation Move-Assistant Device Based on Adams
Influence of Eu2+ Doped Contents on the Spectroscopic Features of Sr2-X MgSi2O7:xEu2+
Resonant Third-Order Optical Nonlinearities of the Stretch-Oriented Cyanine-Dye-Doped Poly(vinyl Alcohol) Films
Design and Manufacturing of High Concentration Reflected Photovoltaic Module
Enhanced Two-Photon 3D Optical Storage in a Novel Multibranched-Dye Doped Photobleaching Polymer
The Mean Projected Range and Range Straggling of Yb Ions Implanted in Silicon Crystal
Preparation and Characterization of a Novel Optical Material Based on Zinc-Tetraphenylporphyrin
Preparation and Performance Optimization of a Full Color Organic Light-Emitting Diodes Display Device
Synthesis, Characterization, and Gas-Sensing for Trimethylamine of Mesoporous Ni-Doped Indium Oxide
Chapter 6: New Functional Materials
Experiment and Analyses on 16 Mn Steel under Cyclic Loading Controlled by Strain
A Kinetic Model of Alumina Inclusion Nucleation in Molten Steel
Effect of Ultrasonic and Argon-Blowing Treatment on the Nitrogen Content in Low Carbon Steel
Preparation of Al2O3 Nano-Particles Reinforced Fe-Based Composite Materials via In Situ Synthesis
Point Clouds Based Dynamical Representation for Heterogeneous Objects
Research of Ventilation and Dust Removal Technology for Whole Rock Fully-Mechanized Excavation Face
PWM Chopper of Ultrasonic Power Supply Based on FPGA
Prediction of Tensile Strength Based on RBF Neural Network
First-Principles Study of Energy Band Gap of Graphene-Like B-C-N by Strain
Synthesis of Nanocrystalline Fe25Al57.5Ni17.5 by Mechanical Alloying
Microwave Synthesis and Characterization of Nanoscale Lanthanum Cobaltite
Adsorption Kinetics of Cr (VI) onto Strong Alkaline Anion Exchange Fiber from Aqueous Solutions
Swelling Behaviors of Acrylic-Based Superabsorbent Fibers
Experimental Research of Energy Harvesting and Storage Based on Ferroelectric Materials
Physical Properties of Silk Fabric Containing Chitosan and Silver
CFD Simulation of Hydraulics of Dividing Wall Sieve Trays
Synthesis and Liquefaction Properties of L-Alanine Hydrosulfate Ionic Liquid
The Development of Baud Silk Knitted Fabric
Electrocatalytic Property for H2O2 Reduction of -Ni(OH)2 Nanosheets
Absorption of Methyl Orange by Modified Fly Zeolites
Preparation and Magnetostriction of Epoxy-Bonded Pr(Fe0.4Co0.6)1.93 Composites
Effect of Deposition Polymerization Technique of Pyrrole on Properties of UHMWPE Fiber
Hierarchical Porous Hollow Microsphere for Drug Release
Synthesis and Electrochromic Properties of Soluble Polythiophenes
Influence of Magnesium Content on Preparation of Aluminum Foam
A Kind of Heterogeneous Data Synchronous Design for the Internet of Things
The Electrochemical Behavior of the Rehealing Oxide Scales After Pitting Corrosion
Multi-Functional Fabric Development and Study on its Performance
Preparation of Raspberry-Like Polymer/Silica Composite Particles through Cationic Soap-Free Emulsion Polymerization
Analysis on Vibration Response Based on Suspension Stiffness for Full-Floating Cab
Monochromatic Red Electroluminescence Based on Copolymer of N-Vinylcarbazole and Eu-Complexed Acrylic Acid
The Crack-Tip Higher Order Fields of Linear FGM Plates with Reissner's Effect
Analysis of a Fluxgate Incorporating Demagnetization Field
Feasibility Analysis of Development of Imitating Padauk Furniture Industry of Recombinant Bamboo
Corrosion Inhibition of Carbon Steel in Sulfuric Acid by [BMIm] [Lys] Amino Acid Ionic Liquids
Dynamic Test of Nitrite Removal by SSI from Wastewater
Polyaniline/Graphene Composite as Supercapacitor Electrode
Influence of Reduction Time on Specific Surface Area of SSI
Kinetic Model of Spherical Sponge Iron Reduced by Hydrogen
Structure and Magnetostriction of Tb0.7Pr0.3FeX Prepared by Solid-State Synthesis
Post-Growth Assembly of Nanowires for Integration of Nanodevices
Study on Lock Mechanism of Coil Strapping Machine
The Higher Order Crack Tip Fields for Special FGM Functions
Structural Evolution of Mechanically Alloyed Nanocrystalline Fe25Al50Ni25 Intermetallics
Study on the Characterization and Controlled Drug Release Carrier of Thiolated Chitosan-Based Nanoparticles
Study on Synthesis, Characterization and Ultrasonic Degradation the Dyeing Wastewater of 11- MnZrMo Heteropoly Salt with Keggin Structure
Graphene Oxide and its Applications in Catalysis
Study on the Evaluation of Minor Rural Road Network Planning Alternative in the State Commercial Grain Base
Nano-Crystalline Diamond Development and Application
Martensitic Transformation and Shape Memory Effect of Ni53.25Mn21.75Ga25 Ferromagnetic Shape Memory Alloy
Dispersion of TiH2 Foaming Agent in Precursors via Melt Route
Numerical Techniques for Nonlinear Lagrangian Dynamical Systems and Their Application
Chapter 7: Building Materials
Structure and Optical Properties of SnS Nanowire Arrays Prepared with Two-Step Method
Effects of Atmosphere on the Periclase-Hercynite Brick
Analysis of Vibration Reducing Effects of Cone Shape Materials with Holes Installed on Platforms
Preparation of Carbon Nanoball from Starch by Arc Discharge
Study on Light Porous Sintered Material
Surfactant-Assisted Hydrothermal Synthesis of Multilayered Flower-Like BiOBr with Enhanced Visible Light Photocatalytic Activity
Study on Structural Plywood Production Technology from Eucalyptus/poplar
Discussion on the Sustainability of Stainless Steel Applied in Architecture
Investigation on Oxidation Resistance of the Flint Clay-Andalusite-Silicon Carbide Composite
Nonlinear Analysis of Eccentric Compression of GFRP Tube Filled with SRHC Columns
J Integral of Steel Fiber Reinforced High Strength Concrete
Formation and Specialties of Steel / RC Composite Open-Web Floor Structures
Research on Antiseptic and Corrosion-Inhibiting Admixture for Concrete
Experimental Study for Cement Microscopic Property by Backscatter Scanning Technique
Study on Waterproof and Water-Resistant Properties of Gypsum
Study on the Thermal Performance of the Vernacular Dwellings in Wei-He Plain of Shaanxi Province
The Surface Characteristics of Exterior Wall External Insulation System with Foamed Glass in Weathering Resistance Test
Study on Model Test and Consolidating Mechanism of Piles Thrusted-Expanded in Column-Hammer
Nanoparticulate Functional Materials: Green Synthesis and Application for the Degradation of Phenolic Compounds
Study on Life of Concrete Eroded by Seawater
Preparation of ZnF2 Nano-Particles by Electrochemical Anodization Method
Dynamic Viscosity Analysis of Base Bitumen with the Addition of Rediset
Design and Application of Steel Tube Confined Concrete
Utilization of Cold in-Site Recycling Technology on Distressed Asphalt Concrete Pavement
Green City Designing Based on Sustainable Development
Mix Ratio Design and Performance Optimization of Vitrified Microsphere Insulating Mortar
Experimental Study of External Thermal Insulation Mortar Based on Fly Ash Floating Bead
Experimental Studies on Abiochemistry Anchor Bolt
Study the Properties of Mae-Khong Alluvial Gravel Concrete for Producing the Non-Bearing Thin Wall Concrete
Experimental Research on the Mechanic Performance of the Cavity Wall Material
Experimental Study on Frost Resistance Properties of Pumice Mixed Aggregate Concrete
Feasibility Study of Using Desulphurization Slag as Binder Material for Concrete Mixing
Investigation on Life Products Existence in Porous Asphalt Concrete Using Nano CT Technology
Discussion on Control of Hazardous Materials in Ship Recycling Activities
Synthesis of Titania Microshperes with Controllable Diameter Under Solvothermal Conditions
Lateral Dynamics of Three-Axle Steering Vehicle Based Zero Vehicle Sideslip Angle Control
Study on Carbonation Resistance of High-Performance Concrete with Large Amount of Fly Ash
Sustainable Performance of Limestone Cement
Investigation on the Effect of Silica Fume on Shrinkage Characteristics of Portland Cement-Silica Fume Paste
Study on Grinding Aids of Different Organic Group
Early Stage Hydration Process of Hydroxypropyl Methyl Cellulose Ether Modified Cement Pastes
Study on Sustainable Use of Raw Soil Material in Rural Houses Design in Western China
A Study on the Correlativity and Date Simulation between Rock Abrastivity and Physical and Mechanical Indexes of Rock in Qingdao Subway, China
Application of Self-Compacting Concrete in Strengthening of Existing Reinforced Concrete Column
Influence of Hydrothermal Temperatures on the Structure of BaTiO3 Nanoparticles
Numerical Analysis of the Wet Deformation for Earth-Rock Dam during Water Storage
The Growth Mechanism and PL Performance of Bat-Like ZnO Nanorods
Study on Fluorine Gypsum Block Reinforced by Wheat Straw
Research on Construction Technology of External Insulation and Economic Analysis of XPS Board External Wall of Pasted Dovetail Groove
Electrorheological Properties of Ni-Group Nano Particles and Multilayer Compound Polar Molecule Modify
The Measurement and Theoretical Analysis of Elongation Value of Tensioning Tendon
Study on the New Wall Insulation Materials of Vitrified Micro Bubbles
Chapter 8: New Energy Materials
The Research of Electrolyte on Lithium/Sulfur Battery
Inkjet Printing Technology for Dye-Sensitized Solar Cells
Investigation on the Electrochemical Cycle Stability of La-Mg-Ni-based A2B7-type Alloys Prepared by Melt Spinning
Study on High Quality Polycrystalline Silicon p/n Films Fabrication through Recrystallization by RTP
Research on the Influence of Electron Beam Parameters on Molten Pool Morphologies during Electron Beam Melting Silicon
Applicability of Gd0.9Ca0.1AlO3- Ceramic Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells
Kinematics and Dynamics Simulation of Key Components of Wind Turbine
Preparation of Porous Silicon and Effect of Gettering on the Resistivity
Silicon Wafer Microstructure Fabrication Using Nanosecond Laser Pulses
Development of Solid Oxide Electrolyzer Cell (SOEC) Cathode Materials
Characterization and Preparation of Well-Dispersed TiO2 Nanoparticles by Ultrasonic Microemulsion Method
High-Temperature CO2 Capture Using MgO/ -Al2O3 Materials as Adsorbent
Preparation of Large Size Pyramidal Texture on N-Type Monocrystalline Silicon Using TMAH Solution for Heterojunction Solar Cells
Preparation and Luminescence Characteristics of Li2Y4-XEux(WO4)7 Red-Emitting Phosphor
Membrane Potentials across the Cation Exchange Membrane in Aqueous Mixed Electrolyte Solutions
Preparation and Performance of Gypsum Matrix Phase Change Energy-Storage Material
Design and Implementation of Assembly Resources Management System Based on Knowledge
A Simple Hydrothermal Process Based on FePO4*2H2O to Synthesize Spherical LiFePO4/C Cathode Material
A Study on Anti-Collision RFID Algorithm Based on Interval Estimate Method
Chapter 9: Environmental Friendly Materials
Removal of Copper-Cyanide Complexes from Electroplating Industry Effluents by Ion-Exchange Fiber
Research Advances of Element-Doped Nanocrystalline Titanium Dioxide Thin Films
The Study of Sodium Alginate Adsorption with PAE as Environmental Friendly Additive for Paper Strength
Preparation and Adsorption Property of Modified Activated Carbon for Purification of HCN in Closed Carbide Furnace Tail Gas
Locally Adjusting Operation on Concave Vertexes of Planar Polygon
Study on Division of Natural Bamboo Fibers by Steam Explosion
Analysis and Prevention of Pulling Inhibition and Stagnation of Slab Casters
Effect of Calcination Temperature on the Photocatalytic Activity of Spiel Zn2SnO4
Effect of Thermal Modification on the Physical Properties of Populus ussuriensis
Application of Fuzzy Statistical Analysis to Middle School Students' Perceptions on School Climate
Dissolution of Cellulose and Synthesis of Cellulose-Graft-Poly (L-Lactide) via Ring-Opening Polymerization in an Ionic Liquid
Preparation of PLA/Nano-ZnO Composites
Analysis on Mechanical Properties of Lotus Fibers
Photocatalytic Degradation of Methylene Blue Using Nano-ZnO at Air Lift Circulating Reactor
High Performance Iron-Rich Magnesia-Spinel Composite for Burning Zone of Cement Rotary Kiln
A Study on the Liquid Mulching Film of Lignin
Study on the Photocatalytic Degradation of Diesel Pollutants over a Sol-Gel Prepared TiO2
Physical and Mechanical Properties of Inorganic Particles Filled Individual Bamboo Fibers
Study on the Correlation between the Property of Akund Fiber and its Growing Conditions
Study on the Photocatalytic Degradation of Diesel Pollutants in Seawater by a Sonochemically Prepared Nano Zinc Oxide
Study on Carding Processing Length of Akund
Research on Structure and Properties of Lotus Fibers
Efficient Destruction of Chlorophenols by Ultraviolet Irradiation
Study on Compression Behaviour of AZ31 Magnesium Alloy at Room-Temperature
Adsorption of As (v) from Water by Activated Aluminum Oxide
One-Pot Synthesis of Mesoporous MCM-41 with Different Functionalization Levels and their Adsorption Abilities to Phosphate
Research on Special Cement for the Concrete with Ultra-Fine Iron Tailings
Synthesis and Performance of NaA/MCM-48 Micro-Mesoporous Composite Molecular Sieve
Optimal Design of Rotation Shaft Torque Testing System
The Wear Mechanism Comparison between MgO-Based Chrome-Free Brick and MgO-Cr2O3 Brick in the Lower Part of RH Vacuum Degasser
Synthesis and Application of Water-Borne Nontoxic Emulsion from Wasted Polystyrene Foam
Study on the Photocatalytic Degradation of Ammonia Nitrogen in Aquaculture Wastewater by Fe3+-Doped Nano-TiO2 under UV Irradiation
Preparation of Visible Light Response K6SiW11O39SnII for Photocatalytic Degradation of Acid Brilliant Scarlet
A Study on Engineering Properties of Self-Compacting Concrete Containing Waste LCD Glass
Relationship between Akund Fibers' Carding and Sliver Quality
Chapter 10: Earthquake Materials and Design
Intelligent Job Shop Scheduling in Auto Blanking Plant
Clamping Deformation Analysis Research Based on a Flexible Clamping Fixture of Thin-Walled Curved Surface Parts
Remote Monitoring in Distributed Measurement System Using DataSocket JavaBean and Java Applet
Axial Compressive Experimental Study on Full-Scale Square Concrete Columns Confined by High-Strength Spiral Hoops
Path Optimization in Hull Part Cutting Based on Seven Bridges Problems
Chapter 11: Biomaterials
The Effects of adhE Deletion on the Metabolism for D-Lactic Acid Production by the Escherichia coli JH11
Preparation and Characterization of a Bio-Composites Scaffold Containing Nano-Hydroxyapatite /Carboxymethyl Chitosan
Preparation of Borosilicate Xerogel and Research on its Mineralization
Fabrication Methods of Porous Tantalum Metal Implants for Use as Biomaterials
Study on Chain Extension and Modification of Poly(Lactic Acid) by Isophorone Diisocyanate /Polyethylene Glycol
Reinforcement of Hydrogen Peroxide Bleaching of Bamboo Pulp
Synthesis and Characterization of a Biodegradable Poly (Glycerol-glycol-sebacate) Terpolymer
Simulation Analysis of Drive System of Wind Turbine Gearboxes
Effects of Water Vapor on the Oxidation Behaviors of Cr-Al-N Coatings
Effects of Vacuum Infusion on Dried Nata Rehydration Ratio
An Optimized Dynamic Join Query Method for Multi-Hop Wireless Sensor Networks
Trapping Yeast Cells on PDMS Micropillar Array
Preparation and Properties of Pullulan Composite Films
Effect of Inter-Rod Coupling on 1-3 Piezocomposite High-Power Ultrasonic Transducers
Structural Characteristics of a New Original Bamboo Structure Composite Boards
Influence of the 2,2-Dimethylol Propionic Acid Content on the Structure-Properties of Waterborne Polyurethane
Chapter 12: Smart/Intelligent Materials/Intelligent Systems
Towards Web-Based Adaptive Learning Assistant Approach
Using Mahalanobis Clustering Algorithm for College Student Learning Fundamental Mathematics
The Application of Infrared Sensors Integrating Stepper Motor Based on C8051F120
Research on Teaching Strategy Based on Individual Requirements under E-Learning Environment
Synthesis and Shape Memory Effect of Poly(Glycerol-Sebacate) Elastomer
Reserach on the Feeding Model and Residual Error Model of a New Polishing Device
Rheological Behaviors of Polyacrylonitrile Melt Using Ionic Liquids as a Plasticizer
Formation Mechanism and Simulation Research on Innovation Clusters
Shape Memory Effect Improvement and Study of the Corrosion Resistance of the Fe-8Mn-6Si-13Cr-6Ni-12Co Alloy
Chapter 13: Polymeric Materials
Microstructure Study on Optimization of High Strength Fly Ash Based Geopolymer
Influence of Three Diffusion Paths on the Pump Signal in ZrO2-Based NOx Sensor
The Study on the Reverse Atom Transfer Radical Polymerization of MMA Catalyzed by Acetylacetonate Cobolt(II) Complex Supported by Ionic Liquid
Slice Spectrum of AR Trispectrum for the Fault Diagnosis of the Hydraulic Control Valves
In Situ FT-IR Studies on the Catalytic Reaction of Isophorone Diisocyanate with Benzyl Alcohol
Electronic Effect of Fluoro Substituents on Chromium(III) Complexes bearing -Diketiminate Ligands for Ethylene Polymerization
Preparation of Highly Conductive Polyaniline in Carbamide Aqueous Solution Using SnCl4 as Initiator
Theoretical and Experimental Study on the Crimp Mechanism of Bi-Component Filament
Study on the Relationship between Nominal Filtration Accuracy and Absolute Filtration Accuracy of the Automobile Engine Oil Filter Materials
Real-Time Monitoring Device and Method of the Compression Stress of Rubber Materials
In Situ FTIR Spectroscopy Study on the Crystallization Process of Isotactic Polypropylene in Isotactic Polypropylene/Polyethylene-Glycol Blends
The Two-Stage Curing Method for Shape-Memory Materials
Effect of Shear Intensity on Structure and Properties of PA1010/CaCl2 Composites
Biosorption of Food Dye onto Gelatin Microspheres: Equilibrium Isotherm and Thermodynamic Analysis
Relationship between Sequence Length and Thermal Properties of Poly(ethylene Terephthalate-Co-4, 4'-Bibenzoate) (PETBB)
Preparation of Sealing Gasket Resistant to High Temperature and Conducting Oil
The Formation Mechanism of CH4 on Nitrile Butadience Rubber in Transformer Oil
Synthesis of Star Cationic Polyacrylamide and its Application in the Retention and Drainage System of Papermaking
NBR's Storage Life Prediction Based on the Accelerated Life Test
Test on Indoor Thermal Environment of Haidong Region in Qinghai Province China in Winter
Radial Orientation Mechanism and Research of Short Fiber in Extrusion Die
Effect of Gamma Irradiation Crosslinking on PA6 Fibers
Application as Papermaking Organic Particulate Retention Agent of Cationic Polymethyl Acrylate Emulsion in Bleached Wheat Straw Pulp
Preparation and Characterization of a Novel Mixed Functional Cationic Exchange Copolymer Microsphere as Drug Carrier
Theory Study for Moving Force Identification
Adsorption of Food Dye onto Gelatin Microspheres: pH Effect in Kinetics and Mechanism
Morphologies and Properties of Epoxy Resin-Low Molecular Weight Polyamide Curing System Modified with Expanded Graphite
An High-Performance Water-Based Drilling Fluid and its Application
Synthesis, Characterization, and Flocculation Properties of Branched Polyacrylamide
Preparation and Uranium Sorption Performance of Amidoximated Polyacrylonitrile/Organobentonite Nano Composite
Effect of Carbon Fiber Reinforcement on the Mechanical and Tribological Properties of PA6/PPS Composites
Study on Synthesis of Cationic Polymethyl Acrylate Emulsion
Chapter 14: Thin Films
Soft Magnetic Property of [Fe80Ni20-O/ZnO]n Multilayer Thin Films for High-Frequency Application
Analysis of Wet Etching Characteristics of a-IGZO Thin Film
Effects of Substrate Bias on the Microstructure and Properties of a-C:H Films Deposited by MFPUMST
Preparation and Characterization of Electrospun Poly (3, 3'5, 5'-Tetramethyl-4, 4'-Diaminodiphenyl-Butyltoluene-Co- 3, 3', 4, 4'-Biphenyltetracarboxylicdianhydride) Nanofiber Membranes
Effect of Deposition Temperature on Surface Roughness of Nanocrystalline Diamond Film
Effects of Pulsed Negative Bias and Current Density on Properties of N-Doped TiO2 Films Deposited by Arc Ion Plating
Preparation of Ultra-High Molecular Weight Polyethylene Microporous Membranes via Thermally Induced Phase Separation
Microstructure and Properties of Laser Clad Nonmagnetic WC-FeNiCr Metal-Matrix Composite Coating
First-Principles Study of Electronic Structure of V-Si-N Nanocomposite Thin Film
Research on the Experiment of ZnO Thin Film by Pulsed Laser Deposition
A Method of Fault Detection and Diagnosis for Electromagnetic Direction Valve Based on Artificial Neural Network
Post-Processing and Properties of Polyethersulfone Hollow Fiber Membrane
Study on the Tensile Fracture Characteristics of Cars Oil Filter Materials
Preparation and Characterization of TiO2 Photocatalytic Thin Film Prepared by Sol-Gel Dip Coating
Effects of Ce Doping on the Properties of ZnO Thin Films Prepared by DC Reactive Magnetron Sputtering
The Characterization of TiO2 Films Prepared by Pyrolysis
Wuxi Hui-Quan Substation Three-Dimensional Modeling and GIS System Implementation
Buffer Layer Effects on the Structure and Morphology of SmCo/Cu Thin Films
Preparation and Mechanical Characterization of Nanocrystalline Diamond Films on Aluminum Oxide Substrates
Chapter 15: Mechanical Behavior & Fracture
An Integrated Evaluative Function and Water Bloom Predicting and Prewarning System
Grey Relational Grade Analysis between Vickers Hardness and Fatigue Crack Growth Data of 2024-T351 Aluminum Alloy
Studies of Ti-15V-3Cr-3Al-3Sn after Thermohydrogen Processing
A Fractal Study on Collective Evolution of Short Fatigue Cracks under Various Strain Amplitudes
Effect of Energy Input of Welding Thermal Cycles on the Cryogenic Toughness of the CGHAZ in Steel 9Ni
An Investigation on the Shear Toughness for Sn/3.0Ag/0.5Cu and Sn/37Pb Solder Ball Joints
Size Effects on Biaxially Compressed Stability of Triaxial Weave Fabric Composites
Study on Mechanism of L-Shaped Concrete-Filled Steel Tubular Columns Subjected to Axial Compression
Effect of Y and Zn Substitution on Tensile Properties of 6H-Type LPSO Phase in Mg97Zn1Y2 Alloy
Hardness of Rapidly Solidified Al-High Si Alloys
In-Plane Crushing of Triangular Honeycomb Cores, Part II: Under Dynamic Loadings
An Investigation to Added Mass Force on the Wing of Insect Inspired from a Rigid Sphere Model
GIS-Based Environmental Sensitivity Evaluation for Supporting Scenic Area Planning: Case Study of Lushan-Xihai International Art Park
Correlation between NDT and Tensile Strength of Structural Larch Sawn Lumber
In-Plane Crushing of Triangular Honeycomb Cores, Part I: Under Quasi-Static Loadings
Mechanical Analysis for Laying Thermal Insulation Pipe
Numerical Analysis of Thermally-Induced Residual Stresses in Beryllium Caused by BeO
Nonlinear Stability Analysis for FGM Shallow Conical Shells Subjected to Thermal and Mechanical United Loads
First-Principles Study on the Ideal Strengths of Typical Hcp Metals
The Influence of Pore Defects Distribution Characteristic on Casting Service Performance and Fatigue Life
Mechanical Properties of High Strength Concrete Filled Steel Tubular Columns Part 2: Slender Columns and Eccentrically Loaded Columns
Failure Prediction of Laminated Composites with the Hole under in-Plane Compressive Loading
Numerical Simulation for Mechanical Behavior of Carbon Black Filled Rubber Composites Based on Plane Stress Model
Three-Dimensional Elastic-Plastic Constraint Analysis for Side Crack Tension Specimen
Reliability Design for Allowable Stress of Creep Rupture Strength of 4Cr25Ni35 Steel
The Two Dimensions Analysis of Localzation Bandwidth in Material Distortion
Simulation of First Mode Crack Propagation in a Viscoelastic Solid System Fuel Structure Using Crack Length-Temperature Superimposition
Design for Manufacture and Integrated Manufacturability Evaluation System
Microstructure and Mechanical Characteristics of the CrN/Si3N4 Multilayered Films Prepared by Sputtering
Chapter 16: Tooling Testing and Evaluation of Materials
Analysis on Test Method of Metal Magnetic Memory Mechanism of Ferromagnetic Materials Based Plastic Deformation
Damage Evaluation of Supercritical CO2 for Hydronibrile Nitrile(HNBR)
The Application of Multiaxial Fabric Blower Blade and its Strength Theory Check
Application of Ultrasonic Guided Wave Method for Flaw Detection in Coal-Fired Power Plants
Monitoring and Characterization of Chemical Shrinkage during Curing in a RTM Resin
Failure Analysis of Hard Alloy Roll Rings and their Repairing Technology
Characterization of Wafer Surface Topography after CMP
The Deduction and Application of Correction Formulas of Three-Dimensional Residual Stress with Layer Stripping Method
Equilibrium Automatic Wind Door and Electronic Control System
Spectroscopy Methods in Analysis of Mineral Composition
Preparation and Activity of Ionic Liquid Catalysts Grafted on Hydrophobic Silica Gel
Analysis of Volatile Organic Compounds in Disposable Food Packages at Three types of Temperature
An Improved Standard Addition Method for Material Components Analysis
Study on Behavior of Geosynthetic Reinforcement in GRPS Embankment
by "Nielsen BookData"
