Mechatronics and intelligent materials II : selected, peer reviewd papers from the 2012 International Conference on Mechatronics and Intelligent Materials (MIM 2012), May 18-19, 2012, GuiLin, China
Author(s)
Bibliographic Information
Mechatronics and intelligent materials II : selected, peer reviewd papers from the 2012 International Conference on Mechatronics and Intelligent Materials (MIM 2012), May 18-19, 2012, GuiLin, China
（Advanced materials research, v. 490-495）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
- Part 3
- Part 4
- Part 5
- Part 6
Available at 1 libraries
-
Part 1A25118/490400049378,
Part 2A25118/490400049386, Part 3A25118/490400049394, Part 4A25118/490400049408, Part 5A25118/490400049416, Part 6A25118/490400049424
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This work comprises 798 peer-reviewed papers on Mechatronics and Intelligent Materials, and seeks to promote the development of those topics by strengthening international academic cooperation and communication via the exchange of research ideas. It will provide readers with a broad overview of the latest advances made in the fields of mechatronics and intelligent materials.
Table of Contents
Preface and Committee
Chapter 1: Mechatronics
A New Coordinate Control Method for Electric Motor Regenerative Braking and ABS Coordinate
A Limited Interval Gradient Projection Algorithm for Inverse Kinematics
A New Hardware-in-the-Loop Test System for Electronic Control Unit of Dual-Clutch Transmission Vehicle
A Clonal Selection Algorithm Based Optimization of Activated Sludge Process
A Method for Path Generation of Robot Automatic Polishing Based on Bounding Box
A New Kind of Locking Device for Centrifuge Nacelle
A Temperature Control Method about Two-Dimensional Correlation of Infrared
A Multi-Channel Data Acquisition System and its Performance Analysis Method Based on FPGA
Design of PCB Engraving Machine System Based on MCU
A New Chaos Analysis Method: Exclusion Analysis Method and its Application: Simulation and Comparison
A Variant of Newton Method with Eighth-Order Convergence for Solving Nonlinear Equations
A Screw Dislocation Interacting with a Lip-Shaped Crack Bonded by a Strained Reinforcement Layer under Remote Longitudinal Shear Load
A Circuit Model of Quantum Cascade Laser Based on a Numerical Analysis
An Improved Ant Colony Optimization Algorithm Based on Immunization Strategy
A PSO-Based LQR Controller for Accelerator PWM Power Supply
A Rapid Vote-Counting System Based on Image Understanding
Analysis of the Effect of Rain Attenuation to the Optical Communication
A Test Study of Wet Dual Clutch Transmission during Vehicle Launch
A Vehicle On-Board Alcohol Detection System Based on Integrated Multi-Sensors
A Wireless Head-Controlled Mouse Design Using Adaptive Unscented Kalman Filter Algorithm
Analysis of the Key Technologies and Information Security of the 220kV Digital Information Substation
An Aircraft Adaptive Control Architecture Based on Nominal Controller
A New Vanishing Point Detection Algorithm for Orthogonal Directions
A Multilevel Feature Points Detecting Method upon Point-Octree for Point-Based Models
An Improved Image Edge Feature Extraction Algorithm Based on Ant Colony Algorithm
Analysis of Bit Loading Algorithms in OFDM System
Bearing Fault Diagnosis Based on Dual-Tree Complex Wavelet Transform
A Visibility Design Method Based on Virtual Maintenance in Maintainability Design
Adaptive Subdivision Surface Reconstruction for Scattered Data in Reverse Engineering Based on GPU
3D Model Reconstruction of the Broken Aeroengine Blade Based on the Laplacian of Guassian Detection
An Optimization Model for Aircraft Maintenance Scheduling Based on ABC Algorithm
Calculation of the Branching Ratio of the Process e in a Model of Electroweak-Scale Right-Handed Neutrinos
A New Image Segmentation Method Based on Three-Dimensional Neural Network
Analysis on Fatigue Damage of Metal Rubber Vibration Isolator
Computation and Analysis of Frost Formation on Ground Aircraft
Analysis of Water Jet Trajectory of Auto-Targeting Fire Sprinkler System in Interior Large Space
Aero-Engine Condition Monitoring Based on Kalman Filter Theory
Application of MATLAB in Digital Signal Processing
Analysis on Automobile Engine Failure Diagnosis Based on Genetic Algorithm
Application of PID Control Algorithm Based on Improved BP Neural Network to Turntable System
Analysis of Hydraulic Regenerative Braking System for Electric Vehicle
A Discrete Particle Swarm Optimization Approach to Optimize the Assembly Sequence of Mechanical Product
Design of Audio Signal Testing and Analysis System Based on Virtual Instrument
Design of Electromagnetic Heating Control System with Rotational Scanning in Plastic Machinery
Aero-Engine Vibration Fault Diagnosis Based on Harmonic Wavelet
Application of Extendable Optimal Degree Method in Evaluation of the Gun Maintenance Process Quality
Analysis on Draghead Teeth of Drag Suction Hopper Dredgers Based on the Theory of Fuzzy Reliability
Mechanism Study on the Grading of the 5BF-3 Fruits Grading Machine
Design and Research of Anti-Interference for Control System of Automatic MIG Welding Machine
Design of the Digital Phase Meter with GPIB Interface Based on FPGA
Design of Wireless Sensor Network Nodes of Thermal Pipeline Based on Zigbee
Breast Tumor Recognition Based on Multiple Support Vector Machine
Ethanol-Gasoline Engine Performance Simulation and Experimental Study
Development of Cutting Optimization System for Garment
An Improved Simulated Annealing Algorithm Based on Genetic Algorithm
Core Characteristics of Server Virtualization and Functional Upgrading Issues
Fuzzy-PID Control in Electro-Hydraulic Proportional Valve Control System of Snow-Melting Agent Spreading Truck
Development of Special Automatic Welding Machine for Adaptor Flange of Tubular Parts and Cylindrical Parts
Long Distance Pipeline Cathodic Protection Test System Based on GSM
Coercive Force Enhanced by Nanometer-Sizing of Magnetic Column and Measured by X-Ray Magnetic Circular Dichroism (XMCD)
H Dynamic Output Feedback Control for a Class of Discrete-Time Stochastic Systems with Sector Nonlinearities and Mixed Time-Delays
Design of Software Platform for Online BCI System
Envelope Analysis Based on the Combination of Morlet Wavelet and Kurtogram
Error Identification for 3-Axis Machine Tool Based on Laser Interferometer
Calculation of the Branching Ratio of the Process 3e in the Hung Model
Evaluation of Highway Maintenance Machinery Configuration Based on Fuzzy Comprehensive Evaluation Method
Competing Effects of Band Filling and Steric Factors on Magnetic and Transport Properties of Double Perovskite
A Clonal Selection Algorithm Based Fuzzy Optimal Iterative Learning Control Algorithm
Experimentation Study of Damage Identification for Steel-Frame Structure Based on AR Model
Dynamic Encryption Algorithm Based on Rijndael
Fault-Diagnosis of Machine Assembly Based on Fuzzy ES
Kinematic Performance Analysis of the Double Wishbone Independent Front Suspension
Analysis on the Effect of Bend Curve Radius to Inherent Characteristics of the U-Tubes
Local Mean Decomposition Based Bearing Fault Detection
Cellular Competitive Decision Algorithm for Minimum Ratio Spanning Tree
Constant Pressure Water Supplying System with Frequency Conversion Based on PLC /HMI/VVVF
Application of Improved BP Network in Failure Forecasting
Genetic Algorithm Application in Cutting Way
Data Aggregation with End-to-End Security for Wireless Sensor Networks
Intelligent Electronics Vehicle Monitor Based on Map Control
Delay-Dependent Robust Strictly Dissipative Analysis for a Class of Singular LPV Systems with Delays
Multi-Objective Optimization Design for Body Hoist Mechanism of Mining Dump Truck
Design and Realization of /4-DQPSK Modulation Circuit Based on FPGA
Nonlinear Optimal Tracking Control of Valve-Controlled Asymmetrical Cylinder
Pattern Recognition Based on New Distances between Intuitionistic Fuzzy Sets
Precise Study and Application of Long Distance Lead Forecast Technology in Tunnel
Prediction and Analysis of Tunnel Crown Settlement Based on Grey System Theory
Management System of Parallel Lithium Batteries Based on MCU
Movement Mechanism Analysis of Electromechanical Worm Drive
MWGANN Prediction Model for Electromechanical Equipment Running State
Properties of Weighted Geometric Means Combination Forecasting Model Based on Absolute of Grey Incidence
Preparation of Quartz Nano-Powder Based on GA-BP Neural Network
Double-Equilateral-Triangle Array and Precision Analysis
Developing and Research on Motion Controller Based on CPLD and MCU
Naive Bayes Classification Algorithm Based on Optimized Training Data
A Novel Hierarchical Dynamic Video Summarization Representation for Video Analysis
Plane Non-Circular Curve Outline Parts' Relative Constant Motion Modelling and Error Analysis
Design According to the Measurement & Control Platform of the AT91RM9200 Embedded System
Preceding Vehicle Visual Detection and Tracking Based on Template and Shadow Feature
Remote Improved Inspecting Gas Sensing System Based on CAN Communication
Reliability Index Assignment and Application of Small-Caliber Ammunition
Precision Analysis for the 3-PRS Parallel Robot
Study on a Novel MEMS High G Acceleration Sensor
A New Coarsening Strategy for Multilevel Graph Partitioning
Research on Electromagnetic Catapult-Oriented Permanent Magnet Linear Synchronous Motor
Scheme Design and Experimental Verification of Gas Sub-Line Measurement
Real-Time Implementation AMR-WB Algorithm in TMS320VC5509A DSP
Research on Methodology of Evolutionary Computing
Research of Company Internal Control Evaluation Based on Space Statistical Distance Evaluation Method
Sensor Array Self-Calibration for Two-Dimensional Direction of Arrival Estimation
Research on Multi-Level Modeling Method for Aircraft Assembly Line
Structural Optimization Design and Experiment Investigation of Electric-Pneumatic Converter Device Based on the Principle of Nozzle Flapper
Research on Enhanced of Mine-Underground Picture
Steady-State Circular Motion Performance Experiments Research about an All Terrain Vehicle
Research on the Adjustment Function of Controlling Differential Stage-Less Speed Variator
Research on the Current Loop of PMLSM
Sample Classification Algorithm Based on Spectral Similarity Calculation
Study on MRAC Strategy of Suspension System Based on Magneto-Rheological Fluid Damper
Research on Regulating of Engine Cooling Intensity with Fuzzy Control
Signal Extraction Based on an Improved EMD Method
Research on Velocity Servo-Based Hybrid Position/Force Control Scheme for a Grinding Robot
Study on Novel Automatic Steel Bundling Machine Pneumatic Control System
Sensor of Measuring Containing Water Ratio in Crude Oil Based on Multi-Electrode Capacitance
Simulation on Composite Backscattering from Rough Surface with Target above it
Simulation Research on Networked Control System Based on NS-2
Study of Compound Fuzzy-PID System for Engine Speed Control of PHEV
Study of Transfer Matrix of Rolling Bearing Including Squeeze Film Damper
Study of a New Wavelet Neural Network of Image Compression Simulation
Study on Fault Diagnosis in Analog Circuit
The Analysis Method of Highline Cable of Alongside Replenishment System Based on Suspended Cable Theory
Study on on-Line Fault Diagnosis of Torque and Position Sensor of EPS Based on Artificial Neural Networks
Study on Improvement of Chain Plate Feeding System
The Application of a New SEPIC in Photovoltaic System
Study on the Hydraulic Relationship between Molin River and Groundwater
A Novel Dynamic Real Time Controller Based on Score Function of Intuitionistic Fuzzy Sets with Time Parameter
The Building of Cigarette Factory Warehousing Management System Based on Data Warehouse
The Constraints on the Physical Parameters in Gauge Interactions of Leptons in the Hung Model
Temperature Compensation Experiment of Love Wave Sensor
The Clutch Engagement Strategy Research Based on the Multi-Condition in the Off-Road Vehicle Starting Stage
Test Study of the Damage-Fractured Process for Double Fractured Rock
The Application of RBF Neural Networks in Curve Fitting
The Control Technology of Air-Conditioning Based RBF Adaptive Neural Network
The Application of Fuzzy Comprehensive Evaluation Method to the Assessment of Ascension Brake System Reliability
The Full Wave Numerical Solution for Fast Wave Current Drive in Tokamak
The Implementation of Distance Measurement Using Binocular Vision
The Lightning Current Measurement Based on Wavelet Transform
The Modification Design of Road Traffic Information Mobile Monitoring Vehicle
The Logistics Warehouse Management and Control Integrated System Based on Information Fusion
The Measurement Method for the Stealth Performance of Large-Electric-Size Unmanned Aircraft
The Method of Selecting the Distance between Holographic Plane and Source Plane in NAH
The Research of the Gun Zone Charge Recognition Technology Based on BP Network
The Research on Implementation Effect Evaluation ERP Financial Management of Electric Power Enterprise
The Present Situation and Future Development of Electric Vehicles in China
The Similarities and Differences of Speech Communication between Face-to-Face Situations and Electronic Situations
The Mathematical Analysis of Underwater Vehicle Control System
The Research of City Walkthrough System Based on Voice Navigation
The Inverse Research of Electrical Exploration Results
The Safety Disassembling Principle of Ammunition Screw Parts and its Application
The Simulation of a Cartridge Manipulator Based on Virtue Prototype
The Motion Simulation of Humanoid Robots Based on Adams
The Research and Design on the Electrical Control System of TG200 Bridge Machine
The Research and Development of a New Type of Metal Wire-Buckling Machine
The Study on Dual Excitation Synchronous Permanent Magnets Synchronous Machines for Electrical Vehicle
The Study on Accounting Information System Application Controls and Administrative Controls
The Study on Mobile Robot Path Planning Based on Frog Leaping Algorithm
The Study on Robot Control Using Underwater Sensor Network
The Study of Fault Diagnosis Method Based on Chaos Characteristics
The Study of Opening Control Algorithm for Proportional Vales which are with Pressure Compensators
The Temperature Control of Electric Furnace Based on PID Genetic Algorithm
Theoretical Analysis of Granularity Control of Particles
Time Domain Electromagnetic Differential Equation Methods
Three-Dimensional Dynamic Analysis of Sluice Structure
Travel Time Prediction of Road Network Based on Multi-Source Data Fusion
Two Methods to SVPWM Harmonic Analysis and the Essential Relation
VHDL- Based FPGA/CPLD Design Optimization Research
Vision-Based Deformation Measurement of Loaded Three-Ring Chain
Simulation Research of the Ship Course Control System
Structure Optimization Design and Airflow Numerical Simulation for Negative Pressure Isolated Cabin
Design Based on Multi-Channel Power Acquisition and Data Teletransmission System of MSP430 Simulating SPI Interface and CS5460A Communication
One Kind of Flight Control System Design for Separation Section in Cruise Missile
Study of Shock Control of Gear-Shifting in Automatic Transmission
The Situation and Developing Prospects of Embedded Systems
DSP-Based Intelligent Split-Phase Self-Adaption Reactive Power Compensation Controller
Object Tracking with Gradient Part-Based Models
One Electric Motor System for Steering Hydraulic Pump and Braking Air Pump in HEV BuS
New Types of Verifiably Encrypted Signature Schemes
Multi-Dimension and Structure Element Edge-Detection Based on Mathematical Morphology
Derivation of Magnetostrictive Losses from Admittance Spectra
A New Algorithm for Tracking a Maneuvering Target
Queueing Analysis of Spectrum Trading for Wireless Cognitive Radio Networks
Multipurpose Detecting System for Automotive Switch Function Based on Virtual Instrument (LabVIEW) and Embedded Technology (ARM)
Application of SVM Classifier and Fractal Feature in Circuit Fault Diagnosis
Pressure Measurement System Design and Controlling Study on the Double-Clutch Automatic Transmission
Moving Target Detection and Segmentation Method Research in Intelligent Transportation System
Modeling and Simulation Analysis of Motorized Spindle Vector Control
Mechanism Parameters Optimization of Jumping Robot Based on Dynamic Directional Manipulability
Preparation and Thermal Transfer of Phase Change Microcapsule on the Fabric
Measurement of Axial Impact Force of Pipeline Transporting Thick Pastes
Monitoring Aero-Engine Fuel Flow Based on Neural Net
Characterization of Magnetostrictive Losses Using Complex Parameters
Design of CAN Central Control Modular Based on USB
Mobile Robot Dynamic Path Planning Based on Artificial Potential Field Approach
Feed-Forward Compensated PD Controller and PD Robust Controller Simulation Comparison on Uncertain Single-Manipulator
LabVIEW-Based Parallel Optimization of Networked Virtual Test System in Multi-Core Processor Environment
Modal Parameter Simulation and Model Updating for some Launch Platform
Lube Intelligent Diagnosis System Combining Bayesian and BP Network Based on IOT Technology
Application of Simulation Technology in MCU System Development
Experimental Study on Physical Properties of Fired Perforated Brick
Intelligent Fault Diagnosis Method Based on Vector-Bispectrum and SVDD
Implementation and Analysis of the File System Based on Metadata Dynamic Hashing
H Control for Networked Systems with Random Time Delay and Data Packet Dropout
MEMS Sensor and Electrostatic Detection Technology in the Application of New Type Composite Fuze
Experimental Investigation of Rotor Rubbing Faults
Modeling and Analyzing the Voltage-Displacement Performance of Cymbal Piezoelectric Transducers
A Feature Extraction Approach of Traffic Congestion from Video
Implementation of an Intelligent Integrated Detection System Based on Virtual Instrument for Different Missiles
MFL Detection Defect Reconstruction of Pipeline Based on Conjugate Gradient Methods
Feature Extraction of Gearbox Compound Faults Based on Blind Source Separation
Lifetime Computational Models of Rolling Bearings in a 1.5MW Wind Turbine's Epicyclic Gearbox
Measures on the Impact-Spread of Road Accidents
A Multi-Role Particle Swarm Algorithm for Numerical Optimization
Hardware Design of Point for Information Exchange among Multi-Sensor Network
Electrical Control System Design of Automatic Piston Ring Chamfering Machine
Application of Shaft Lining Monitoring System in the Deep and Thick Overburden
Large Stroke Series Compliant Mechanism
Design Automatic Fabric Defect Inspection System
Control System Design of Braking Energy Regeneration of Miniature Electric Car Based on Super Electric Capacity
Clinical Information Research Based on Multiple Stepwise Regression Algorithm
Model of One-Dimensional Photonic Crystal and Application
Analog Circuit Fault Diagnosis Using LDA and OAOSVM Approach
Gray Correlation Analysis of Human Factors for Unsafe Events in Air Traffic Control
Phase Field Study of Concurrent Nucleation and Growth in a Diffusion-Controlled Solid-State Phase Transformation
Fractional-Order PID Controller of a Heating-Furnace System
Method of Evaluating the Complexity of Geometries for Free-Form Surfaces
Distributed Power Control for Cognitive Satellite Networks
Integrated Guidance and Control of Missile Using Subspace Stabilization Method
Feature Enhancement of Wear Particle Images Based on Curvelet Transform
Method of Assembly Sequence Planning Based on Simulated Evolution Algorithm
Intelligent Digital Voltage Meter Design and Implement Based on AD7715
Experimental Study of Coupling Fiber-Optic Vibration Sensor Based on Variational Theory
Construction Control Analysis of Large Span Reinforced Concrete Arch Bridge
Influence of Strip Wave-Shape upon Running Deviation inside Continuous Annealing Line
Development of Instrument Cluster Simulation System Based on Canoe
Integral Algorithm for Generating Anti-Aliasing Circle Based on Bresenham Algorithm
An Immune-Based Node Localization Algorithm for WSN
Geometric Calibration of Machine Tool Based on Auto-Trilateration
Communication of Double-Robot Polishing System
Fuzzy Comprehensive Evaluation on the Projects Risk Based Set Pair Analysis
Equipment Fault Diagnosis Based on Incomplete Rough Sets Theory
A Dynamic Data Fragmentation and Distribution Strategy for Main-Memory Database Cluster
Heat Transfer Simulation and Optimization of Cooling System for Micro Wankel Engines
Design of UART with CRC Check Based on FPGA
Electronic Compass Calibration in Pedestrian Navigation System
An Image Segmentation Method Using Image Enhancement and PCNN with Adaptive Parameters
CNC Transformation Method for the Study
Ground Penetrating Radar Imaging Based on FDTD Migration Method
Full-Column Rank Solutions to a Nonlinear Matrix Equation
Diagnosis of Incipient Failure of Gearbox Based on Signal Enhancement Technologies
Design of Developing Platform for Equipment Management Based on Workflow Technology
Characteristics of Electromagnetic Waves Propagation in Corridor for High-Rise Buildings
Design and Implementation of Monitoring System Based on MSP430
Determination of the Total Ginsenosides in Ginseng Using the UV Spectrophotometer and Evaluation of the Measurement Uncertainty
Control System Design of Intelligent Water Meter
Design of Serial Communication Monitor System of Excavator Based on LabVIEW
Detecting Object by Affine Transform Using Line
Briefly Discussing on Red Clay in Highway Subgrade Filling Treatment Method
A High Resolution and Full Information Magnetic Field Measurement System
Feedback Filter PID Control for Integrator and Time Delay Processes
Dynamic Modeling and Motion Simulation of a Movable-Winged Underwater Glider
Designing and Simulation Testing of Kilowatt Switching Power Supply Transformer
An Antisubmarine Detection Method Using IR Spectrometer in Ocean Remote Sensing
Dynamic Characteristics of Linear Rolling Guide Joint Based on Contact Stiffness
Battlefield Acoustic Target Localization in Electronic Sentinel System
An Algorithm for Seeking the Minimal Cost Maximal Flow Based on Petri Net
Based on the Fractal Technology of Bad Data Detection Method in Power System
Application of Combination Forecast Model in the Medium and Long Term Power Load Forecast
Design of Programmable Ship Navigation Light Controller
An Extensional Clustering Algorithm of FCM Based on Intuitionistic Extension Index
An Image Repair Method Based on Grid Extraction
Dilemmas in Digital Forensics for Computer Equipment Security and Maintenance in Remote Ships
Backstepping Sliding Mode Control for Rocket Launcher Alternating Current Servo System
An Energy-Balance Based Distributed Topology Control Algorithm for Wireless Sensor Networks
An Improved Covering Fuzzy Rough Set Model
A Method of Multi-Classifier Combination Based on Dempster-Shafer Evidence Theory and the Application in the Fault Diagnosis
A Method of Fault Detection and Diagnosis Based on Time-Frequency Analysis
A Real-Life Mobility Patterns Based Routing Protocol in Delay Tolerant Mobile Sensor Network
A Noninvasive Sound Wave Temperature Measuring System Software Design
A Novel Traffic Prediction Method Based on IMF
A Novel Variable Step Size LMS Algorithm Based on Modified Hyperbolic Tangent and Its Simulation
An Improved Two-Phase GAI Particle Swarm Optimization Data Clustering Algorithm
Study on Technique of Tolerance Optimal Allocation Based on Adaptive Genetic Algorithm
Study on High Frequency Hydraulic Exciter Based on Rotary Valve Control
The Security Measures of FCS in Power Plant
Simulation and Analysis on Pressure Resistance Experiments of Automotive Body
The Building of Accounting Information System Based on REA Model
Study on Automatic Measurement of Small Angles
The Design of Transmission Line Monitoring System Based on Wireless Sensor Network
The Study on Signals Control System of Wet Dual-Clutch Automatic Transmission Shift Process
Optimization of Regulation Methods in District Heating Systems
Analysis of "Distance-Loss" Model Influence Factors in Vehicular Ad Hoc Networks
Transformer Winding Deformation Fault Diagnose Based on FRA and Energy Feature Extraction by Wavelet Packet
Study on EGR Control Strategy for Vehicle Diesel Engine Based on Experiment
Robust Predictive Control for Uncertain Time-Delay Systems with Nonlinear Disturbance
The Numerical Simulation of Flow Field of Target Type Impinging Stream Nozzle Based on Fluent
Research on Driving Fatigue Monitoring Based on Tree-Structure Classifier
The Improvement of Pseudo-Boolean Satisfiability Algorithm for FPGA Routing
Thermal Error Modeling and Compensation of a CNC Machining Center
The Temperature Measurement Method Based on the Image of Mechanical Part during Heating Treatment
Study on Fractal Box Dimension and Its Application to Fault Diagnosis of Hydraulic Pump
Stress Analysis of RC Column under the Isolator in the Base-Isolation System
Robust Stabilization for a Class of Switched Nonlinear Systems
The Application of Microcontroller Timer/Counter in Speed Measuring/Speed Regulation System
The Study of SPWM Controller Based on TMS320F2812 DSP
Study on Boring Small Hole of Stainless Steel Dryly by Ultrasonic Vibration Double Cutter
Study on Compensation Based on Neural Network Control of GPC
The Control System Design Based on PLC for Low-Pressure Sealed Cabin
Research and Design of the Remote Fault Diagnosis System for Complicated Equipment Based on Intelligent IETM
Single-Chip Fuzzy Control of Diesel Engine Electronic Speed Governor
Study on Processing Quality Monitoring Technology for Gun Barrel Caliber
Navigation Condition Effect on Ship Motion in some Sea State
The Study of the SVPWM Realization Method Based on DSPIC30F6010A
Tool Wear Prediction Based on Fuzzy Cluster Analysis
Research on Thermal Characteristic and Thermal Compensation Technology of Spindle System of CNC Machine Tool
Research on Goniometer Fault Detection of a Certain Missile Based on Wavelet Analysis
3D Motion Parameters Estimation Using MRF and Neural Network
The Grey Relational Analysis of Driving Forces for Water Consumed Structure
Research and Application of Reverse System Based on Bluetooth Technology
Study on the Application of Segmentation Algorithm Based on Medical Image Fusion
The Statistic Definition and Research of the One Class Similar Special Curve
The Design of GPS Digital IF Signal Simulator
Research on Fire Detection in Coal Mine Based on GA-Improved Wavelet Neural Networks
Transient Dynamic Analysis of Mechanical Structure of Multi-Axis Force Sensor and Measuring Circuit Coupling System
Simulation Research on SUV Passenger Car Rear End Impact
The Multiple AC Servomotors' Synchronous Operation Control System Based on DSP and FPGA
The Study on Automobile Electronic Key Systems using Numerical Analysis
Research on New Mechanical Seismic Simulation Platform Exciter
The Management Cost Forecasted of Retaking Expired Operating Highway Based on the Grey Model GM (1,1)
Speech Enhancement System Based on Lyapunov FXLMS Algorithm
TSP24 System and Application in Construction of a Highway Tunnel
Production Research of PLC-Based Disc Motor Punching-Winding Machine
The Analysis of Fiber Positioning System Temperature
The Application of Improved Genetic Algorithm in Distribution Network Reconfiguration
Design of Measuring and Evaluating System of Airport Support Vehicle Training Simulator
The Optimization Design of Vacuum Chamber in Vacuum Electron Beam Welding Machine
Simulation Analysis of Production Control Methods in Manufacturing Systems
An Improved Generalized Predictive Control for AUV Yaw
Analysis of Directional Accuracy of Three Single Arrays
Air Targets Recognition Based on Feature Analysis and Particle Swarm Optimization K-Means Clustering
The Application of Double Closed-Loop Unit Gain Negative Feedback and BP Neural Network Controller in Single Inverted Pendulum
The Design and Test for the Intermittent Work-Style Drying System
A Trinocular Stereo-Matching Algorithm Based on Adaptive Support-Weight for Mobile Service Robot
Stage Boom Machinery Control Based on Adaptive Fuzzy PID
The Study on Oil Pollution Environmental Treatment Based on Micro-Biological Degradation
The Research Status and Development Trend on the Test and Diagnostic Techniques of Engineering Machinery
A Circuit to Realize the Repetitive Operation of Underwater Corona Discharge in the Application of Water Treatment
The Study on Starting Control of ER Clutch for Vehicle
Research on Fault Knowledge Acquisition Base of Circuit Simulation
The Design of Web-Based Ear-Nose-Throat Diagnosis System
The Design of Interference Generator for Grid Based on 89S52
Research on Deviation Correction Control Technique of the Paver's Traveling System
Study on Regenerative Braking Control Strategy for EV Based on the Vehicle Braking Mechanics
Research on Navigable Width in Winding Channel
Task Assigned Algorithmic for Multi-UCAV Based on Auction Mechanism
The Study on Oral Cancer Detection Based on 3-D OCT Image
Surface Acoustic Wave Based Radio Frequency Identification
Study of Grating Signal Processing Based on FPGA
Sonar Image Registration Based on Improved PSO and Powell Hybrid Algorithm
Application of TSP Tunnel Geological Prediction for Case Study
Rapid Foreground Extraction Algorithm Based on Trimap
The Research of Input Ground Motion on Seismic Fragility Analysis of Bridges
New Hardware Engine for New Genetic Algorithms
A Modification of Newton-Type Method with Sixth-Order Convergence for Solving Nonlinear Equations
Research on Dynamic of Wall Loading of the Discharge Chamber under Electro-Hydraulic Breakdown in Liquid
Study on Clutch Control Strategy of Dry DCT Launching
The Study on Physical Training Segment Parameters Monitoring
Design of Passive Acoustic Location System Based on Double Arrays
Research on the Lane Detection Algorithm Based on Zoning Hough Transformation
Design and Realization of FIR Digital Filter Based on MATLAB
Chapter 2: Manufacturing and Design Science
A Kind of Spatial Angular Magnetic Gear Transmission
A Data Warehouse Cleansing Approach Based on Mathematical Association Rules
A Meshfree Weak-Strong-Form Method for Magnetohydrodynamic Flow in a Pipe
A Linear Algorithm of Spatial Straightness for Five Points
A New Method of Screw Extrusion Molding Pressure
A Improved Method of Enhancement of Video Image in the Coal Mine
A Portable Digital Torsional Vibration Analysis System and its Signal Processing
A Transformation Method between PLC Ladder Diagrams and Instruction Lists Using Recursive and Stack Algorithms
Accurate Calculation and Control of Dry Dual-Clutch Torque during Shifting Process
A Study of Sustainable Design Based on Unconscious Behavior
A Research on the Aided Method for Design of the Hot Runner Structure of Injection Molds
An Approach to Interior Ecological Design Concepts
An Approach Dealing with Wrist Singularity of Six-DOF Industrial Robots
An Arithmetic Function and the k-th Power Part of a Positive Integer
An Indirect Measurement of the Slender Magnet Remanence with a Optical-Pumping Magnetometer
A Study on Model of the U.S. National Environment Management
A System Approach to Risk Management in the Age of Supply Chain Complexity
Analysis of Brockmann's Posters Based on Geometry of Design
Analysis of the Existent Problem and the Policy Suggestions for Chinese New Energy Industry
An Improved Method of Solving Contact Trajectory Boundary for Spiral Bevel Gear
A Study on Time Synchronization Algorithm Based on Energy Effective Strategy
An Optical Imaging Simulation Method for Inverted Microscope and its Application in Automatic Cell Manipulation
Analysis for Blade with Centrifugal Preload under the Impact Stress Wave
A Study on the Controllability of Deepwater Manifold during Launch through Pendulous Installation Method
A Supply Chain Collaboration Model Based on System Dynamics
Analysis of the Greenway Construction in Western Countries
Analysis of Fault Diagnosis for Rolling Bearing Based on EMD and Local Smoothness Index
Analysis of Vortex-Excited Resonance for Main Stay Bar on One Large-Span Bridge
Application of Apriori Algorithm in Diagnosis of Stroke
Application of Improved Analytic Hierarchy Process in Industrial Design Evaluating for Product Design
An Acoustic Experimental Study on Sound Acquisition in Standard Chinese by Native Speakers of Uyghur
Application of the Reverse Engineering to 3D Reconstruction on a Denture
Bifurcation Characteristics of Unbalanced Rotor - Bearing System
Analysis of Trust Chain Transitivity in TCG
Comprehensive Quality Evaluation Oriented to Product Lifecycle
Application of TSP in Construction of Qiupi Tunnel
Application of Fiber Optical Sensor in Thickness Measurement of Mechanical Seal
Comparative Study on the Earthquake-Proofing Performance of Chinese and Japanese Building Structures
Control and Simulation Research on Interactive Oscillation of Operating Power of Diesel Generator Sets in Parallel
Effect of Die Radius and BHF on Formability of the Corner of Box-Shaped Parts in Deep Drawing Processes
Design of New Type Involute Planetary Gear Reducer of Small Tooth Number Difference
Design, Lift Prediction and Test of a PZT Drive Mechanism of a New Concept of Micro Flapping Wing Rotor
ANSYS Simulation Analysis of the Tri-Axial Pipeline Magnetic Flux Leakage In-Line Inspection
Based on the Condition of the Equipment Management
Analyze the Efficiency on FDM Process of Rapid Prototyping Technology with the New Filling Method
Ecological and Energy Saving Ideas Incorporated in Residential House Design
Digital Design Technology in the Contemporary Architecture
Design Method of Fly Ash Concrete Mix Proportion Based on Stable Paste-Aggregate Ratio
Automatic Dredging Robot for Metallurgical Drainage Trench Based on Virtual Design Technology
Based on Genetic Algorithms and Artificial Neural Network Algorithms to Optimize the Structure Design and Implementation of Crane
Design of a High-Speed Reconfigurable Serial Fieldbus with Reliable Communication Based on FPGA
Based on the Matlab Simulation of the Maxwell Distribution
Design and Compiling of Laser Propagation Simulation Software in Atmospheric Environment
Design of a Coaxial Positioning System Based on Flexible Decoupling Beams
Design of Broadband Response Two Degrees of Freedom Piezoelectric Vibrator for Energy Harvesting
Damage Identification for Curl Tube Structure Based on Modal Flexibility Curvature
Finding Principal Axes of Complex Plane Rigid Body with Rending-Image of MATLAB
Customer Requirement Driving New Product Concept Generation Method Based on Naive Bayes Cluster and RST
Finite Element Analysis of Stress for Nozzle Zone at Channel of Pressure Vessel
Experimental Comparison of Diesel Engine's Mounts
Cost Estimation Model Based on Improved Spreadsheet Algorithm for Assembly Line Manufacturing Systems
Design and Research of Double-Drum Winch for Lowering Mooring Anchor Chains
Computing Profile Error of Scroll Wrap Based on the Method of Polar Radius Error
Expression of "Vivid Inner Temperament" in the Contemporary Environmental Design
Comparative Study on Optimization Design Methods of Steering Mechanism
Calculation of Decay e in Small Neutrino Mass Limit in a Model of Right-Handed Neutrinos
Failure Analysis of Laminates Single-Lap Adhesive Joints under Uniaxial Tensile Loading
Experimental Study of Well Deviation Correction Model in Deviated and Horizontal Wells Production Profile
Based on Vector Control of All-Electric Injection Molding Machine Control System Design
Diesel Engine Cylinder Block Casting Process Optimization
An Optimizing Strategy of Load Balancing Based on MSTP
Intelligent Optimization of Green Logistics System for Agricultural Products Based on the Database Resource Mining
Load Sharing of Parallel Shaft Split Torque Transmission System
Design and Analysis of a Lower Limb Rehabilitation Robot
Mechanical Kinematic Scheme Design of Automatic Piston Pin Sorting Machine
Force Analysis Methods and Experimental Research on Double-Curved Arch Bridge
Effect of Parameters on Strength of Composites Single-Lap Adhesive Joints
Energy Saving Analysis of Solar-Powered LED Street Lighting Systems
MASTA Software for Wind Turbine Gearbox Design
Green-Efficiency Assessment of Chinese Industry Based on Principal Component Analysis and Super-Efficiency Data Envelopment Analysis
On the Creative Design of Intellectual Property Protection
Dynamic Characteristics Analysis and Optimization Design of Spindle Box with FEA
Experimental Study of Heat Pipe Exchanger for High Power LED Cooling System
Methods of Moving Boundary Based on Artificial Boundary in Heat Conduction Direct Problem
Developing on Experiment System of Process Equipment and Control Engineering Based on PC and PLC
Numerical Analysis and Test Research on Work Process of PSD in Pulse Solid Rocket Motor
Fatigue Reliability Evaluation Model of Drillstring in Bending Section of Horizontal Well
Design, Propulsive Force Prediction and Test of a Electromagnetic Drive Mechanism of a New Concept of Micro Flapping Wing Rotor
Kinematic Analysis of a Planar Mechanism Driven by Two Orthogonal Layout Actuators
Design of One Portable Maintenance Auxiliary Equipment
Numerical Analysis of Thermal Response of UHTCs under Aerodynamic Heating
Experimental Study on Torsional Vibration of Dual Mass Flywheel
Fracture Reason Analysis of Coal Compactor Roller Shaft
Numerical Simulation on Dynamic Analysis for Pipe Vibration Control Based on an Actively Generated Hydraulic Excitation Force
Research of Technology of Virtual Building and Scene Roaming by Visual Basic
Programming Methods Research for the Non-Circular Curve - The Oval, for Example
Finite Element Analysis of the Hydraulic Pressure in a Large Heat Exchanger
Experimental Study on the Dynamic Performance of Long-Span Steel Arch Bridge in Passenger Dedicated Line
Realization of the Detecting Method for Aircraft Digital Image Transmission System Based on Multi-Processor
Performance Analysis of Bionic Propulsion Device above Water in Different Parameters
Numerical Simulation and Die Casting Process for Cylinder
Appropriate Mass Flow Research of Lubricant for Different Oil Groove Type of Wet Multi-Disc
Application of Kalman Filter in Brake Inertia Dynamometer of Motorcycle
Modeling and Simulation of Inert Gas System for Dangerous Cargo Tankers
Optimal Design Method of Fins in Automotive Oil Cooler Based on the Thermal-Hydraulic Performances
Process of Micro-Simulation of Infilitration Clogging for Highland Reservoir Dam Foundation
Research of Manufacturing Strategic Decision Based on the Competitive Strategic Situation Cognition
Research on Energy Consumption Analysis Method Based on Improved Fuzzy Analytic Hierarchy Process (FAHP) in Iron and Steel Industry
New Model of Waste Comprehensive Combustion
Simulation of Coast Wind Farm Construction
Design and Entity Modeling of Wet Double Clutch
Finite Element Analysis of some Radial Tire
Research on Playing Board Process of Kimono Sleeves with Triangle under the Armpit Based on CAD System
Apply the Route Diagram of the Clothing Business Enterprise Sample Product Technique Level of the High Technology Exaltation Analysis
Design of a Precision Three-Coordinate Measuring Machine Based on SCM
Experimental Study on a Kind of Long Anchor Bolt
Research on Ergonomic Design of Fascia Based on QFD and TRIZ Theory
Navigable Flow Condition Numerical Simulation for Approach Channel of Tiangongtang Junction
Experimental Study on the Mechanism of Axial Ultrasonic-Assisted Grinding
Parametric Design of Spiral Bevel Gear Based on Pro/E
Finite-Time Stabilization for Singular Linear Time-Delay Systems with Time-Varying Exogenous Disturbance
Multiple Integrators Control Based on Feature Data of Controlled System with Random Disturbance
Security Issues of RFID Technology in Supply Chain Management
Design of Portable Comprehensive Test System of Aircraft Wire
Mobile Robot Movement Analysis and Design
Performance of a Parabolic Flexible Joint Using Compliance Closed-Form Equation
Member Behavior-Oriented Simulation Research for Supply Chain Coordination
Research on Stray Current Monitoring of Subway Tracks
Optimization Design of Single Steering Trapezoid Mechanism of Vehicle Based on MATLAB
Research on the Simulation of TT&C System of Space Survey Vessel
Research on a Combined Directional Instrument of DMC and Gyro for Vehicles
Multidisciplinary Object Compatibility Design Optimization Based on Simulated Annealing Algorithm
Outstanding Influence Factor Research of Wet Friction Thermal Field Based on iSIGHT
Grey Correlation Analysis of the Impact of Rate on Urban Transport Structure
Experimental Study of Effect Factors on Performance of Heat Dissipation of HP Heat Exchanger for LED Cooling System
Research and Application of Collaboration between Design & Manufacturing for Precision Forged Blade
Road Stress-Absorbing Interlayer Mix Design Method
Finite Element Analysis on Bending Stress of Generating Spur Bevel Gear Based on ANSYS
Ecological Design for Indoor Interior Surface of Residential Building
Optimal Design of High Power LED Driving Circuit
Research of Three-Dimensional Simulation Tree Based on Iterated Function System
Research on Prospect and Strategy of Civil Engineering Informatization
Furniture Form Bionic Design Methodology
Study for Spray Experiment and Simulation of Nozzle on Icing Wind Tunnel
Smart Home Energy Saving Switch Controller
Research on Environmental Adaptability Evaluation of Engine Based on Fuzzy Evaluation
Structural Damage Detection of Continuous Beam by NExT Based Wavelet Packet Energy
Design of Conjugate-Cams for High-Speed Paper-Separation Mechanism
Safety Recognition Model of Urban Railway Level-Crossings Based on Attribute Mathematics Method
The Integration on Electrical Control Systems Based on Optimized Method
The Method of Automatic Counting of Circular Objects Based on the Matching Method of Fuzzy Circular Template
Simulation Analysis of a Novel Magnetic Gear
Study on Die Surface Coating by Electric Discharging Machining
Research and Design on Monitoring System of Simple Bridge Based on Virtual Instrument Technology
Fabrication of Flaky Magnetic Composite Particles
Talk about Structural Design of High-Rise Buildings
The Experimental Study about Relationship of Centrifugal Fan Shape and Tuyeres Wind Speed
The Simulation and Comparison of Synchronous and Serial Regulating Gates Method in the Emergency Status of Long Distance Water Project
The Optimal Design of Injection Mold Cooling System
Optimized Design for the Number of Injection Mold Cavities
The Study and Simulation on Campus Network Intrusion Detection System
Research on Dynamic Characteristic of the Rotors Connected by the Misaligned Gear Coupling
The Study on Man-Machine System Modeling Based on Computer Aided Ergonomics Design
The Investigation of Performance of Gas-Spray Water Quenching
The Reconstruction Scheme Design and Experiment of the Height-Adjustable W-Beam Guardrail
Optimal Design of a Planar Five-Bar Parallel Manipulator Driven by Two Orthogonal Layout Actuators
The Strength Analysis of Aircraft Landing Gear Strut Based on ANSYS
Study on Mechanical Behavior of Regenerated Concrete Based on Construction Garbage
The Study on Low-Carbon Building Technology Using Natural Air Conditions
Research on Structure Design and Kinematics Equation of Restaurant Service Robot Manipulator
The Safe and Environmentally Sound Recycling of Ships and its Application in China
The Research of Three-Dimensional CAD/CAPP Technology Based on Feature
The Study on Building Structure for Vibration Control
Strength Analysis of Pressure Vessel with Big Openings
Optimal Design for Broadband Dynamic Damper
Shaft Vibration Modal Analysis of Turbine-Generating Set
Fracture Reasons and Improvements for the Running Gear of Shearers
Secure, Robust and Adaptive Echo-Based Information Hiding in Voice Communications for Equipment Maintenance in Marine Ships
The Development of a Multi-Functional Composite Embedded Smart-Skin Antenna Structure
The Finite Element Analysis of Piston under Thermal Load Based on UG/ANSYS
Study on the Physics and Mechanical Properties of Freeze-Thaw Soil and Undisturbed Soil
The Design of the Ethernet Meter Reading System Based on Broadband Power Line
The Study of Super Element Cable
Structure Optimization of a Screw Pump Unit Based on Load Identification
Virtual Prototype Design of No-Tillage Planter Based on Solidworks
The Parameters Identification of Airplane Flutter Model Based Global Nonlinear Separable Least Square Method
Study of Process Flow and Layout of Broiler Production
Weight-Reduction Optimization Design for Milling Planer Bed Based on Finite Element Analysis
Study on Process Control Experimental System Based on MCGS
The Preliminary Study of Food Waste Processing Equipment Reliability Design
The Integrated Structure Design for the Transmitter of the Companion Satellite
Optimization of Vibrating Parameters for Large Linear Vibrating Screen
The Embedded Data Collecting System of Multi-Channel Based on ARM
Research on the Rapid Response Production Preparation System for Compressor Blades of Aero-Engine
Design of a Domestic Wastewater Reuse System
Vehicle Loading Length Measurement System Research Based on TRIZ
Stability Prediction Model for Milling Process
The Application of Proliferated Form in Designing Product Modeling
Study on Demand Bill of Electric Vehicle in China's Carbon Emission Reduction Environment
The B/S Structure Design of Firefighting Equipment Management System for Fire Brigade
Research on Punching and Hot-Pressing Process and Related Mechanism for Easy Tear Lid
Study on Ship Motion under Internal Sloshing Impacts
The Finite Element Simulation Analysis of Tapered Bearing Retainer and Optimized Selection of Mould Parameters
The Study on EDA Tools for Antenna Design
The Application of Water-Cooling Pipes in the Mass Concrete of Hu Lu Shan Wan Crossing Sea Bridge
The Construction of Warning Model for Technology Patent on Environmental Engineering
Design of Numerical Control Machine on Human-Centered Design and Man-Machine Engineering
Research on Concept Design of Hot Runner Based on Axiomatization and Knowledge Unit
The Track Structural Design and Finite Element Analysis of the Track Type Thinning Shredder
The Single Straw Composite Board Manufacturing Process Research
Research on the Realizing Mechanism of an Industrialized PL-ISEE Database Platform
Test on the Shape Schemes of Jilintai-I Hydropower Station Flood Discharge System
Reverse Engineering of Artwork Teacup
Study on Structure of Articulated Needle and its Obstacle Avoidance
Research on Flexible Bonnet Polishing Process Method and Related Technology
Selection of Outsourcing Supplier Based on AHP
Test System for Digital General-Purpose Integrated Chip
Research on Cooperative Equipment Maintenance Technology Supported Platform
The Application of the Vector Control in Centrifuge
Research of Geological Exploration Information System Based on Three-Tiered C/S Architecture
The Single Pipe Double Cavity IMS Contraband Explorer for Trace Detection
Studies on the Dynamic Transform of Database Based on Design Process
Synthetic Evaluation of Warfare Capability of Submarine Launched Torpedoes Based on Projection Pursuit Model
The Model Analysis of Mobile Emergency Platform Car Frame Based on ANSYS
Linear Regression Calculation and Energy Saving Analysis about Thermotechnical Parameters of Target Type Impinging Stream Nozzles
Nuclear Polarization and - Atom Energy Levels
The Finite Element Analysis on the Submarine Pipeline under the Seismic Loading
Strength Analysis of Flexure Hinge Mechanism in XY Table
Research on Aerodynamic Noise of Base Styling Characteristics of Car Rearview Cover
Research on Technology of Responding for Multi-Specification and Small-Batch Mechanical Production Quotation Based on Feedback Amendment
Research on QoS of ertPS of 802.16e Scheduling Algorithms
The Functional Configuration Mapping for Cloud-Based Mass Customization Service Platform
Study of Performance of US-FE-LSPIM QUAD4 Element on Mesh Distortion
Cause Analysis of Cracks Found on Horizontal Truss of Quayside Container Cranes
The Discharge Characteristic Analysis and the Simulation of Axial Piston Pumps
FEM Analysis of a Diesel Engine's Cylinder Head
Comprehensive Optimum Design of Working Device of Loader Based on Sensitivity
Emulation Analysis for Construction Process of High-Rise Building
Chapter 3: Material Engineering and Science
A Comparative Study on Emergency Materials and Equipment for Oil Spills
A R-p-da/dN- K Surface Formula and the Statistical Analysis of Effects of Stress Ratio on Crack Growth for GC4 Steel
Adsorption of Heavy Metal Ions with Magnetic Carbon-Coated Iron Nanoparitcles
Application of the High Strength Steel in the Automobile
A Review on Mechanical Properties of Freestanding Diamond Films
Analysis of Disturbance Signals in Steel Rolling Process
Approach to Modified Mechanism of Eutectic Si in Alumina Fiber Reinforced Al-Si Alloy Composites
Characteristics and Process Optimization of Hot-Air Drying Pepper
Development of High Silicon Nickel-Copper Alloy NCu30-4-2-1 Extrusion Bars
Characterization and Properties of CrN and CrBN Films
Effect of Strip Defect on Cleavage Fracture Toughness of Steel 16MnR
Effect of Growth Parameters on Single Crystal Diamond Deposition by DC Arc Plasma Jet CVD
A Portable Apparatus for Colloidal Gold Test on Clenbuterol
Apply Artificial Neural Networks to Estimate Stress Distribution around Holes Edge in Composites
Dynamics of Phase Transformation of Cu-Ni-Si-Zr-Cr Alloy during Aging Precipitation
Application of R/S Rheometer in Low Temperature Drilling Fluid Rheology Determination
Effect of Rare Earths Addition on Mechanical Properties and Wetting Behavior of Sn-2.5Ag-0.7Cu Lead-Free Solder
II. Characterizations of Alginate-Chitosan Hydrogel for Wound Dressing Application
Evaluation of Glass-Forming Ability for Metallic Melts by Phase Field Approach
Effect of Chelating Pretreatment on Photocatalysis Bleaching
Magnetization Evolution with the Doping Element in Double Perovskite
Controllable Synthesis of CaMoO4 Microcrystals with Tailored Morphologies and Optical Properties
Fundamental Research on Development of Micro-Actuator Driven by Liquid Crystal
Dynamic Performance of the Steel Tube Filled with Steel-Reinforced Concrete Finite Element Analysis
Influence of Fluoride Ion on the Electrochemical Properties of Al/ -PbO2 Electrode
Efficient Synthesis and Photochromic Properties of a New Unsymmetrical Photochromic Diarylethene Base on Naphthalene Unit
Application of Laser Heat Treatment Process on the Surface Treatment of Pipe Threaded
On the Stability Capacity of Steel Tube Filled with Steel-Reinforced Concrete Column Subject to Axial Compression
Distributed Control System of Ceramic Material Kiln Based on MVC
Environmental-Friendly Electropolishing of 304 Stainless Steel Surface
Cytotoxic Responses and Potential Health Effects of Nanosized ZnO on Tetrahymena Thermophila
Design of CO2 Heat Pump Water Temperature Control System Based on C8051F500 SCM and Electronic Expansion Valve
Constant-Wavelength Synchronous Fluorescence Spectrometry for the Determination of Polycyclic Aromatic Hydrocarbons in Water Samples
Development of Experimental System in Organic Synthesis
Low Temperature Large Scale CVD Synthesis of Nano Onion-Like Fullerenes
Automatic Classification of Welding Flaws in Ultrasonic Testing Using the Layer Multi-Class Classifier Based on v-SVM
Extremely High Efficiency Orange Phosphorescent Organic Light-Emitting Devices
Nonlocal Size Dependence of a Softness Nanobeam with Large Axial Tension under Various Boundary Conditions
Effect of Acid Pretreatment on Photocatalysis Bleaching
Melt Flow Type and Physical Model of Semisolid Rheo-Casting Process by Cooling Sloping Plate
Fracture Analysis near Interface Crack Tip for Mode I of Orthotropic Bi-Materials
Optical Properties of -Si3N4 Studied from First-Principles Method
Effect of Sub-Temperature Quenching Temperature on Microstructure and Property of 35CrMo Steel
Ionic Liquid Assisted Sol-Gel Prepared Ce-Doped ZnO
Effect of Thermal Process on the Microstructure and Property of Si/Al Composite with High Si Content
Facile Synthesis and Enhanced Photocatalysis of Sm Doped TiO2
Intelligent Materials and Contemporary Industrial Design
Drilling Simulation on Carbon Fiber Reinforced Plastics and Aluminum Laminated Composite
Material Engineering for Low Power Consumption and Multi-Level Storage in Lateral Phase-Change Memory
Influence Mechanism of Curing Shrinkage on Tensile Shear Strength of Isotropic Conductive Adhesive
Discuss on Green Shipbuilding Technology: Design and Material
Photochromic, Kinetics, and Fluorescence of a Novel Diarylethene
Microstructure and Properties of TiO2 Thin Films Doped with Ni
Low Temperature Synthesis of Nano-Carbon Materials Using a Water-Soluble Catalyst Support by Chemical Vapor Deposition
Low Temperature Synthesis of Onion-Like Fullerenes Using Aluminum Hydroxide Supported Iron Catalyst
Microstructure Formation Mechanism of AZ31 Magnesium Alloy Processed by Rheo-Forming
Material Constants of TC18 Titanium Alloy Deformated in + Region
New Technics of Restoring High-Strength Steel Parts on Airplane by Brush Plating a Composite Coating of Diamond
Finite Element Analysis of the 320mm Hydraulic Support Column
Modeling of the Mixing of Composite Solid Propellant Slurry in a Kneading Mixer
Phase-Field Simulation of Interface Effect during Grain Nucleation
LiFePO4 Battery Information Integrated System
Influence of Alloying on the Uniformity of Strength and Structure of Gray Iron
Numerical Simulation Analysis of the Cold Bending Forming Technology Based on DEFORM
Preparation and Character Measurements of ZrO2 Films for RF Magnetron Sputtering
Preparation and Characterization of Glass Flake/Nano-TiO2 Compound Particle on Low Temperature
Flame Retardancy of Lanthanum Phosphinate in Combination with Intumescen Flame-Retardant in Polypropylene
Preparation and Spectral Analysis of Light Conversion Advanced Invisible Falsification-Resistant Ink
Preparation of Tin - Titanium Alloy in Powder Metallurgy Method
Preparation and Swelling Dynamics Characterization of Poly(N, N-Diethylacrylamide-Co-Itaconic Acid) Intelligent Hydrogels
Photoinduced Anisotropy in a New Diarylethene Bearing Five and Six-Membered Aryl
Microstructure and Electrical Properties of ZnO-Bi2O3-Based Varistor Ceramics by Different High-Energy Ball Milling Time
Preparation and Basic Characterizations of Alginate-Chitosan Hydrogel
Normalized Fuzzy Control of High Density Aquiculture's Dissolved Oxygen
Motion Characteristics of Composite-Type Sea Cage under Pure Wave
Pythagoras Number Theory and the Scientific Beauty of the Theory Origin
Standard Plate for Radar Absorbing Materials' Measurement in 3 mm Band
Research on Process of Copper-Infiltration on 304 Stainless Steel by Double Glow Plasma Technology
Processing Maps for TC18 Titanium Alloy Deformed in + Region
Researches of a Magneto-Rheological Fluid Damper with External Coil Based on Electromagnetic Finite Element Analysis
Research of the Morphology and Distribution of the Primary Silicon in Al-18Si Alloy under a Gradient High Magnetic Field
Preparation of Mesoporous TiO2 Thin Films and Research on Ultraviolet Photolysis Degradation of Dioxins from MSW Ash
Static Load Test and Analysis on Completed Deck Arch Bridge of Large-Span Reinforced Concrete
Recognition of Partial Discharge Pulse Based on Short-Term Energy and DTW
Preparation and Characterization of Resveratrol-Loaded Hydroxylpropyl- -Cyclodextrin
Preparation and Research of Short Carbon Fibers Network Structure Antistatic Composites
Microwave-Assisted Hydrothermal Synthesis of Ag/BiVO4 Architecture with Enhanced Photocatalytic Activities
Research on the Method of Measurement of Nonlinear Refractive Index of Optical Materials by Interference of Capillary
Preparation of Conductive Films by In Situ Polymerization of 3-Alkylthiophene with Soluble MWNTs
Preparation and Formaldehyde Emission and Bonding Performance of Novel Modified Urea-Formaldehyde Resin Adhesive
Research on Lubricating Property of Piston Pin
Preparation of -PbO2 and -PbO2-MnO2 Coating on Stainless Steel Substrate
Optical Spectrum Analyses of ZnS1-XSex Ternary Material
Preparation and Characterization of Attapulgite Modified by KH-570 for Formaldehyde Adsorption
Optimization of Microwave-Assisted Extracting of Proanthocyanidins from Purple Cabbage and Evaluation of Antioxidant Activity In Vitro
Research on Metal-Rubber Composite Damping Steel Plate Application in Acoustic Bridge for Double Cylindrical Shell
Self-Lubricating SiC/PTFE Composite Coating Formation on Surface of Aluminium Alloy
Properties and Application of Characteristic Polynomial
Sonochemical Synthesis and Characterization of Bismuth Aluminate Nanocrystals
Preparation and Properties of Chrome-Free Colored Na3AlF6 Conversion Coating on Aluminum Alloy
Static Stiffness Analysis for the Parallel Bonding Mechanism of IC Chip Die
Self-Propagating High-Temperature Spraying Synthesis of Ferrites Hollow Microspheres
Study on Activated Carbon Prepared from Coking Fly Ash with KOH Activation
Study on Productive Technology of Greensand Mold and Thick-Walled Small Piece for Nodular Cast Iron
Study on Dyeing Technology Affecting the Dye-Uptake of Bamboo Pieces
Study of an Inorganic Ion Exchanger Al1.25Fe0.75(PO4)2
Study on Impacting Performance of Bamboo-Plastic Composite
Semiconductor Assembly and Test Production Line Simulation Technology
Study on Photometric Performance Attenuation Law of Retroreflective Materials for Road Traffic
Study on HVOF Sprayed Nickel Coated MoS2 Coatings
Study on Automatic Calibration System of Multi-Layered Laminated Thin Film Thermocouple Cutting Temperature Sensor
Study on Mass Segregation Phenomenon of Al2O3 Ceramic Slurries during Centrifugal Slip Casting
Study on Preparation of Gradient Porous Ti by Powder Metallurgy Method
Study on Damage Assessment of Reinforced Concrete Structure after Fire
Research Progress of New Methods for Toughening Epoxy Resin
Study on the Mechanism of Cutting Fracture of H700X300 H-Beam
Research on the Determination of Calcium Content in Calcium Tablet by Microscale Chemistry Experiment
Review of Hygrothermal Effects on Carbon Fiber-Reinforced Composite Materials
Study of Anticorrosive Properties about Epoxy Heavy Anticorrosive Over-Rust Primer/IPN Topcoat
Soybean Protein Acrylates Adhesive Research Progress
Synthesis and Electrochemical Performance of Li3V2(PO4)3 Cathode Material by Microwave Method
Study on the ASTM Standard E826 and its Role in Testing Materials Homogeneity
Startup Research of DIC Hydrolysis Acidification Reactor in Printing and Dyeing Wastewater Treatment
Study on the Deformation of the Prestress Frame of Open-Die Forging Hydraulic Press with Different Operating Modes
Study on the Factors Influencing Plating Coat Thickness in Ultrasonic-Aided Hot-Dip Aluminizing Facing Remanufacturing
Study on the Key Technology of Intelligent Energy-Saving Building Glass by Nanometer Method
Study on the Ductile-Mode Milling of Brittle Ceramics
Startup Research of Integrated Anoxic Aerobic Process in Printing and Dyeing Wastewater Treatment
Synthesis and Characterization of Modified Epoxy-Silicone Resin
Synthesis and Deswelling Behavior of Intelligent Thermosensitive Poly(N, N-Diethylacrylamide-Co-Itaconic Acid) Hydrogels
Synthesis and Properties of a New Unsymmetrical Diarylethene Bearing Two Thiophene Rings
Synthesis and Properties of a Novel Unsymmetrical Diarylethene with Five and Six Ring Aryls
Synthesis of a Novel Photochromic Fluorescence Switching Diarylethene for Optical Recording Storage
Study on Rupture Curing and Monitoring of Shaft Lining in the Special Stratum
The Basic Properties of the Composite Straw Veneer
Synthesis of Gold Nanoparticles by Using a Bolaform Schiff Base Amphiphile at Liquid-Liquid Interface
Synthesis, Characterization of Poly(Aryl Ether Sulfone)s Based on Naphthalene Isomers
Synthesis of Al1.75Fe1.25(PO4)3 and its Selectivity to Li+ Exchange
Study on the Dynamic Lubrication Characteristics of Water Lubricated Rubber Bearing
Study on Technology of Food Waste Biological Aerobic Composting
The Damping Analysis of the Laminated Composite Plate Considering Geometric Nonlinearity
Synthesis, Optoelectronic Properties of a Novel Photochromic Diarylethene Bearing Phenyl and Benzofuran Group
The Analysis for Evaluation of Ceramic Tile's Color Difference Based on CIELAB Color Space
Synthesis, Properties and Application in Optical Memory of a Photochromic Diarylethene Bearing Pyrimidine and Pyridine Ring
The Design of the Wind-Light Complementary Street Lamp
The Damped Eigenfrequency Analysis for an Elastic Disk Clamped by a Water-Filled Cylinder
The Adhesion Testing and Analysis for NiCr/NiSi Thin-Film Sensor
The Environment-Friendly High-Elasticity Asphalt Mixture Using as Stress Absorbing Layer
The Building of Debris Flow Monitoring and Warning System Based on Zigbee Protocol Using Multi-Sensor Technology
The Effect of Microstructure on Mechanical Properties and Fatigue Crack Growth Behavior of TC4-DT Alloy
The Catalytic Properties of the Anodic Aluminum Oxide Template in Synthesis of Carbon Nanotubes
The Casting Process Design and Simulation of the Rear Wearing Plate of 65ZGB Slurry Pump
The Preparation of O-Carboxymethyl-Chitosan and its Particles
The Numerical Simulation on Steam-Water Two-Phase Flow Field of Car Exhaust Pipe
The Intelligent Bridge Health Monitoring System Based on Optical Fiber Sensing Technology
The High Stability Mesoporous MgO-ZrO2 Materials as CO2 Adsorbents
The Prospect of Application of Nanometer Material in Oil Exploitation
Synthesis of Carbon Spheres with Controllable Size Distribution by Chemical Vapor Deposition
The Preparation of Platinum Nanoparticles on Titanium Using Chemical Reductive Growth Procedures
The Research of -SiCp/Al Electronic Packaging Composites Fabricated by Pressureless Infiltrating
The Interface Design of a Dot Matrix Liquid Crystal Display
The Constraints on the Parameters in the Decay Process e and 3e at Tree Level in the Hung Model
The Study of Counting the Strapping Steel Pipes Based on Image Recognition
The Influence of Decomposition and Slagging of Limestone to Temperature in Convertor
The Growth of Si on SiC Complex Substrate by CVD
The Influence of the Post-Annealing Temperature on the Crystalline Orientation and the Crystallinity of PZT Films
The Studies on Photolysis of Dioxins from MSW Ash by TiO2 Thin Film Codoped Co and N
The Method Research of Parameter Identification of Li-Ion Battery Base on Least Square Method
The Study on Microstructure and Thermal Expansion Property of SiCp/Al-30Si Composite Material Prepared by Hot-Pressing
The Synthesis and Ion-Exchange Property of Li+ Memorized Inverse Spinel Al0.75Fe1.25(PO4)2
Ti Microalloying Effect on Corrosion Resistance and Thermal Stability of Cu45Zr48Al7 Bulk Metallic Glass
Theoretical Investigations of the High-Pressure Optical Properties of -Si3N4
Mold Material Selection and Development Trends
Virtual Prototype Simulation of Fine-Adjustment System Kinematics for Segment Erector of Tunnel Boring Machine
Use of Versatile Binaphthalene Derivative in Chromatic-Stability Non-Doped White Organic Light Emitting Diodes
The Influence of Different Ph Values and High Concentrations of Na2SO4 and NaCl on the Photocatalytic Oxidation (PCO) of Methylene Blue (MB) by Aqueous Suspension of Nano-Sized TiO2
The Preparation of Al-Cu-Fe Quasicrystalline Coating by Low Power Plasma Spraying
The Comparative Analysis of Cushion or Shock Absorption Characteristic of Commonly-Used Cushion Packaging Materials
Research on Deformation Properties and Boundary Effect of Composite Sandwich Structure under Deep Hydrostatic Pressure
Influence of Cutting Parameters and Tool Geometric Angles on TC4 Titanium Alloy Chip Shape
Application and Analysis of Plane Woven C/SiC Composites Based on Continuum Damage Mechanics
Precast Concrete Pipe Pile Perfusion Control System Design
by "Nielsen BookData"