Mechatronics and intelligent materials II : selected, peer reviewd papers from the 2012 International Conference on Mechatronics and Intelligent Materials (MIM 2012), May 18-19, 2012, GuiLin, China

著者

• International Conference on Mechatronics and Intelligent Materials
• Chen, Ran
• Sung, Wen-Pei

書誌事項

Mechatronics and intelligent materials II : selected, peer reviewd papers from the 2012 International Conference on Mechatronics and Intelligent Materials (MIM 2012), May 18-19, 2012, GuiLin, China

edited by Ran Chen and Wen-Pei Sung

（Advanced materials research, v. 490-495）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4
• Part 5
• Part 6

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This work comprises 798 peer-reviewed papers on Mechatronics and Intelligent Materials, and seeks to promote the development of those topics by strengthening international academic cooperation and communication via the exchange of research ideas. It will provide readers with a broad overview of the latest advances made in the fields of mechatronics and intelligent materials.

目次

Preface and Committee Chapter 1: Mechatronics A New Coordinate Control Method for Electric Motor Regenerative Braking and ABS Coordinate A Limited Interval Gradient Projection Algorithm for Inverse Kinematics A New Hardware-in-the-Loop Test System for Electronic Control Unit of Dual-Clutch Transmission Vehicle A Clonal Selection Algorithm Based Optimization of Activated Sludge Process A Method for Path Generation of Robot Automatic Polishing Based on Bounding Box A New Kind of Locking Device for Centrifuge Nacelle A Temperature Control Method about Two-Dimensional Correlation of Infrared A Multi-Channel Data Acquisition System and its Performance Analysis Method Based on FPGA Design of PCB Engraving Machine System Based on MCU A New Chaos Analysis Method: Exclusion Analysis Method and its Application: Simulation and Comparison A Variant of Newton Method with Eighth-Order Convergence for Solving Nonlinear Equations A Screw Dislocation Interacting with a Lip-Shaped Crack Bonded by a Strained Reinforcement Layer under Remote Longitudinal Shear Load A Circuit Model of Quantum Cascade Laser Based on a Numerical Analysis An Improved Ant Colony Optimization Algorithm Based on Immunization Strategy A PSO-Based LQR Controller for Accelerator PWM Power Supply A Rapid Vote-Counting System Based on Image Understanding Analysis of the Effect of Rain Attenuation to the Optical Communication A Test Study of Wet Dual Clutch Transmission during Vehicle Launch A Vehicle On-Board Alcohol Detection System Based on Integrated Multi-Sensors A Wireless Head-Controlled Mouse Design Using Adaptive Unscented Kalman Filter Algorithm Analysis of the Key Technologies and Information Security of the 220kV Digital Information Substation An Aircraft Adaptive Control Architecture Based on Nominal Controller A New Vanishing Point Detection Algorithm for Orthogonal Directions A Multilevel Feature Points Detecting Method upon Point-Octree for Point-Based Models An Improved Image Edge Feature Extraction Algorithm Based on Ant Colony Algorithm Analysis of Bit Loading Algorithms in OFDM System Bearing Fault Diagnosis Based on Dual-Tree Complex Wavelet Transform A Visibility Design Method Based on Virtual Maintenance in Maintainability Design Adaptive Subdivision Surface Reconstruction for Scattered Data in Reverse Engineering Based on GPU 3D Model Reconstruction of the Broken Aeroengine Blade Based on the Laplacian of Guassian Detection An Optimization Model for Aircraft Maintenance Scheduling Based on ABC Algorithm Calculation of the Branching Ratio of the Process e in a Model of Electroweak-Scale Right-Handed Neutrinos A New Image Segmentation Method Based on Three-Dimensional Neural Network Analysis on Fatigue Damage of Metal Rubber Vibration Isolator Computation and Analysis of Frost Formation on Ground Aircraft Analysis of Water Jet Trajectory of Auto-Targeting Fire Sprinkler System in Interior Large Space Aero-Engine Condition Monitoring Based on Kalman Filter Theory Application of MATLAB in Digital Signal Processing Analysis on Automobile Engine Failure Diagnosis Based on Genetic Algorithm Application of PID Control Algorithm Based on Improved BP Neural Network to Turntable System Analysis of Hydraulic Regenerative Braking System for Electric Vehicle A Discrete Particle Swarm Optimization Approach to Optimize the Assembly Sequence of Mechanical Product Design of Audio Signal Testing and Analysis System Based on Virtual Instrument Design of Electromagnetic Heating Control System with Rotational Scanning in Plastic Machinery Aero-Engine Vibration Fault Diagnosis Based on Harmonic Wavelet Application of Extendable Optimal Degree Method in Evaluation of the Gun Maintenance Process Quality Analysis on Draghead Teeth of Drag Suction Hopper Dredgers Based on the Theory of Fuzzy Reliability Mechanism Study on the Grading of the 5BF-3 Fruits Grading Machine Design and Research of Anti-Interference for Control System of Automatic MIG Welding Machine Design of the Digital Phase Meter with GPIB Interface Based on FPGA Design of Wireless Sensor Network Nodes of Thermal Pipeline Based on Zigbee Breast Tumor Recognition Based on Multiple Support Vector Machine Ethanol-Gasoline Engine Performance Simulation and Experimental Study Development of Cutting Optimization System for Garment An Improved Simulated Annealing Algorithm Based on Genetic Algorithm Core Characteristics of Server Virtualization and Functional Upgrading Issues Fuzzy-PID Control in Electro-Hydraulic Proportional Valve Control System of Snow-Melting Agent Spreading Truck Development of Special Automatic Welding Machine for Adaptor Flange of Tubular Parts and Cylindrical Parts Long Distance Pipeline Cathodic Protection Test System Based on GSM Coercive Force Enhanced by Nanometer-Sizing of Magnetic Column and Measured by X-Ray Magnetic Circular Dichroism (XMCD) H Dynamic Output Feedback Control for a Class of Discrete-Time Stochastic Systems with Sector Nonlinearities and Mixed Time-Delays Design of Software Platform for Online BCI System Envelope Analysis Based on the Combination of Morlet Wavelet and Kurtogram Error Identification for 3-Axis Machine Tool Based on Laser Interferometer Calculation of the Branching Ratio of the Process 3e in the Hung Model Evaluation of Highway Maintenance Machinery Configuration Based on Fuzzy Comprehensive Evaluation Method Competing Effects of Band Filling and Steric Factors on Magnetic and Transport Properties of Double Perovskite A Clonal Selection Algorithm Based Fuzzy Optimal Iterative Learning Control Algorithm Experimentation Study of Damage Identification for Steel-Frame Structure Based on AR Model Dynamic Encryption Algorithm Based on Rijndael Fault-Diagnosis of Machine Assembly Based on Fuzzy ES Kinematic Performance Analysis of the Double Wishbone Independent Front Suspension Analysis on the Effect of Bend Curve Radius to Inherent Characteristics of the U-Tubes Local Mean Decomposition Based Bearing Fault Detection Cellular Competitive Decision Algorithm for Minimum Ratio Spanning Tree Constant Pressure Water Supplying System with Frequency Conversion Based on PLC /HMI/VVVF Application of Improved BP Network in Failure Forecasting Genetic Algorithm Application in Cutting Way Data Aggregation with End-to-End Security for Wireless Sensor Networks Intelligent Electronics Vehicle Monitor Based on Map Control Delay-Dependent Robust Strictly Dissipative Analysis for a Class of Singular LPV Systems with Delays Multi-Objective Optimization Design for Body Hoist Mechanism of Mining Dump Truck Design and Realization of /4-DQPSK Modulation Circuit Based on FPGA Nonlinear Optimal Tracking Control of Valve-Controlled Asymmetrical Cylinder Pattern Recognition Based on New Distances between Intuitionistic Fuzzy Sets Precise Study and Application of Long Distance Lead Forecast Technology in Tunnel Prediction and Analysis of Tunnel Crown Settlement Based on Grey System Theory Management System of Parallel Lithium Batteries Based on MCU Movement Mechanism Analysis of Electromechanical Worm Drive MWGANN Prediction Model for Electromechanical Equipment Running State Properties of Weighted Geometric Means Combination Forecasting Model Based on Absolute of Grey Incidence Preparation of Quartz Nano-Powder Based on GA-BP Neural Network Double-Equilateral-Triangle Array and Precision Analysis Developing and Research on Motion Controller Based on CPLD and MCU Naive Bayes Classification Algorithm Based on Optimized Training Data A Novel Hierarchical Dynamic Video Summarization Representation for Video Analysis Plane Non-Circular Curve Outline Parts' Relative Constant Motion Modelling and Error Analysis Design According to the Measurement & Control Platform of the AT91RM9200 Embedded System Preceding Vehicle Visual Detection and Tracking Based on Template and Shadow Feature Remote Improved Inspecting Gas Sensing System Based on CAN Communication Reliability Index Assignment and Application of Small-Caliber Ammunition Precision Analysis for the 3-PRS Parallel Robot Study on a Novel MEMS High G Acceleration Sensor A New Coarsening Strategy for Multilevel Graph Partitioning Research on Electromagnetic Catapult-Oriented Permanent Magnet Linear Synchronous Motor Scheme Design and Experimental Verification of Gas Sub-Line Measurement Real-Time Implementation AMR-WB Algorithm in TMS320VC5509A DSP Research on Methodology of Evolutionary Computing Research of Company Internal Control Evaluation Based on Space Statistical Distance Evaluation Method Sensor Array Self-Calibration for Two-Dimensional Direction of Arrival Estimation Research on Multi-Level Modeling Method for Aircraft Assembly Line Structural Optimization Design and Experiment Investigation of Electric-Pneumatic Converter Device Based on the Principle of Nozzle Flapper Research on Enhanced of Mine-Underground Picture Steady-State Circular Motion Performance Experiments Research about an All Terrain Vehicle Research on the Adjustment Function of Controlling Differential Stage-Less Speed Variator Research on the Current Loop of PMLSM Sample Classification Algorithm Based on Spectral Similarity Calculation Study on MRAC Strategy of Suspension System Based on Magneto-Rheological Fluid Damper Research on Regulating of Engine Cooling Intensity with Fuzzy Control Signal Extraction Based on an Improved EMD Method Research on Velocity Servo-Based Hybrid Position/Force Control Scheme for a Grinding Robot Study on Novel Automatic Steel Bundling Machine Pneumatic Control System Sensor of Measuring Containing Water Ratio in Crude Oil Based on Multi-Electrode Capacitance Simulation on Composite Backscattering from Rough Surface with Target above it Simulation Research on Networked Control System Based on NS-2 Study of Compound Fuzzy-PID System for Engine Speed Control of PHEV Study of Transfer Matrix of Rolling Bearing Including Squeeze Film Damper Study of a New Wavelet Neural Network of Image Compression Simulation Study on Fault Diagnosis in Analog Circuit The Analysis Method of Highline Cable of Alongside Replenishment System Based on Suspended Cable Theory Study on on-Line Fault Diagnosis of Torque and Position Sensor of EPS Based on Artificial Neural Networks Study on Improvement of Chain Plate Feeding System The Application of a New SEPIC in Photovoltaic System Study on the Hydraulic Relationship between Molin River and Groundwater A Novel Dynamic Real Time Controller Based on Score Function of Intuitionistic Fuzzy Sets with Time Parameter The Building of Cigarette Factory Warehousing Management System Based on Data Warehouse The Constraints on the Physical Parameters in Gauge Interactions of Leptons in the Hung Model Temperature Compensation Experiment of Love Wave Sensor The Clutch Engagement Strategy Research Based on the Multi-Condition in the Off-Road Vehicle Starting Stage Test Study of the Damage-Fractured Process for Double Fractured Rock The Application of RBF Neural Networks in Curve Fitting The Control Technology of Air-Conditioning Based RBF Adaptive Neural Network The Application of Fuzzy Comprehensive Evaluation Method to the Assessment of Ascension Brake System Reliability The Full Wave Numerical Solution for Fast Wave Current Drive in Tokamak The Implementation of Distance Measurement Using Binocular Vision The Lightning Current Measurement Based on Wavelet Transform The Modification Design of Road Traffic Information Mobile Monitoring Vehicle The Logistics Warehouse Management and Control Integrated System Based on Information Fusion The Measurement Method for the Stealth Performance of Large-Electric-Size Unmanned Aircraft The Method of Selecting the Distance between Holographic Plane and Source Plane in NAH The Research of the Gun Zone Charge Recognition Technology Based on BP Network The Research on Implementation Effect Evaluation ERP Financial Management of Electric Power Enterprise The Present Situation and Future Development of Electric Vehicles in China The Similarities and Differences of Speech Communication between Face-to-Face Situations and Electronic Situations The Mathematical Analysis of Underwater Vehicle Control System The Research of City Walkthrough System Based on Voice Navigation The Inverse Research of Electrical Exploration Results The Safety Disassembling Principle of Ammunition Screw Parts and its Application The Simulation of a Cartridge Manipulator Based on Virtue Prototype The Motion Simulation of Humanoid Robots Based on Adams The Research and Design on the Electrical Control System of TG200 Bridge Machine The Research and Development of a New Type of Metal Wire-Buckling Machine The Study on Dual Excitation Synchronous Permanent Magnets Synchronous Machines for Electrical Vehicle The Study on Accounting Information System Application Controls and Administrative Controls The Study on Mobile Robot Path Planning Based on Frog Leaping Algorithm The Study on Robot Control Using Underwater Sensor Network The Study of Fault Diagnosis Method Based on Chaos Characteristics The Study of Opening Control Algorithm for Proportional Vales which are with Pressure Compensators The Temperature Control of Electric Furnace Based on PID Genetic Algorithm Theoretical Analysis of Granularity Control of Particles Time Domain Electromagnetic Differential Equation Methods Three-Dimensional Dynamic Analysis of Sluice Structure Travel Time Prediction of Road Network Based on Multi-Source Data Fusion Two Methods to SVPWM Harmonic Analysis and the Essential Relation VHDL- Based FPGA/CPLD Design Optimization Research Vision-Based Deformation Measurement of Loaded Three-Ring Chain Simulation Research of the Ship Course Control System Structure Optimization Design and Airflow Numerical Simulation for Negative Pressure Isolated Cabin Design Based on Multi-Channel Power Acquisition and Data Teletransmission System of MSP430 Simulating SPI Interface and CS5460A Communication One Kind of Flight Control System Design for Separation Section in Cruise Missile Study of Shock Control of Gear-Shifting in Automatic Transmission The Situation and Developing Prospects of Embedded Systems DSP-Based Intelligent Split-Phase Self-Adaption Reactive Power Compensation Controller Object Tracking with Gradient Part-Based Models One Electric Motor System for Steering Hydraulic Pump and Braking Air Pump in HEV BuS New Types of Verifiably Encrypted Signature Schemes Multi-Dimension and Structure Element Edge-Detection Based on Mathematical Morphology Derivation of Magnetostrictive Losses from Admittance Spectra A New Algorithm for Tracking a Maneuvering Target Queueing Analysis of Spectrum Trading for Wireless Cognitive Radio Networks Multipurpose Detecting System for Automotive Switch Function Based on Virtual Instrument (LabVIEW) and Embedded Technology (ARM) Application of SVM Classifier and Fractal Feature in Circuit Fault Diagnosis Pressure Measurement System Design and Controlling Study on the Double-Clutch Automatic Transmission Moving Target Detection and Segmentation Method Research in Intelligent Transportation System Modeling and Simulation Analysis of Motorized Spindle Vector Control Mechanism Parameters Optimization of Jumping Robot Based on Dynamic Directional Manipulability Preparation and Thermal Transfer of Phase Change Microcapsule on the Fabric Measurement of Axial Impact Force of Pipeline Transporting Thick Pastes Monitoring Aero-Engine Fuel Flow Based on Neural Net Characterization of Magnetostrictive Losses Using Complex Parameters Design of CAN Central Control Modular Based on USB Mobile Robot Dynamic Path Planning Based on Artificial Potential Field Approach Feed-Forward Compensated PD Controller and PD Robust Controller Simulation Comparison on Uncertain Single-Manipulator LabVIEW-Based Parallel Optimization of Networked Virtual Test System in Multi-Core Processor Environment Modal Parameter Simulation and Model Updating for some Launch Platform Lube Intelligent Diagnosis System Combining Bayesian and BP Network Based on IOT Technology Application of Simulation Technology in MCU System Development Experimental Study on Physical Properties of Fired Perforated Brick Intelligent Fault Diagnosis Method Based on Vector-Bispectrum and SVDD Implementation and Analysis of the File System Based on Metadata Dynamic Hashing H Control for Networked Systems with Random Time Delay and Data Packet Dropout MEMS Sensor and Electrostatic Detection Technology in the Application of New Type Composite Fuze Experimental Investigation of Rotor Rubbing Faults Modeling and Analyzing the Voltage-Displacement Performance of Cymbal Piezoelectric Transducers A Feature Extraction Approach of Traffic Congestion from Video Implementation of an Intelligent Integrated Detection System Based on Virtual Instrument for Different Missiles MFL Detection Defect Reconstruction of Pipeline Based on Conjugate Gradient Methods Feature Extraction of Gearbox Compound Faults Based on Blind Source Separation Lifetime Computational Models of Rolling Bearings in a 1.5MW Wind Turbine's Epicyclic Gearbox Measures on the Impact-Spread of Road Accidents A Multi-Role Particle Swarm Algorithm for Numerical Optimization Hardware Design of Point for Information Exchange among Multi-Sensor Network Electrical Control System Design of Automatic Piston Ring Chamfering Machine Application of Shaft Lining Monitoring System in the Deep and Thick Overburden Large Stroke Series Compliant Mechanism Design Automatic Fabric Defect Inspection System Control System Design of Braking Energy Regeneration of Miniature Electric Car Based on Super Electric Capacity Clinical Information Research Based on Multiple Stepwise Regression Algorithm Model of One-Dimensional Photonic Crystal and Application Analog Circuit Fault Diagnosis Using LDA and OAOSVM Approach Gray Correlation Analysis of Human Factors for Unsafe Events in Air Traffic Control Phase Field Study of Concurrent Nucleation and Growth in a Diffusion-Controlled Solid-State Phase Transformation Fractional-Order PID Controller of a Heating-Furnace System Method of Evaluating the Complexity of Geometries for Free-Form Surfaces Distributed Power Control for Cognitive Satellite Networks Integrated Guidance and Control of Missile Using Subspace Stabilization Method Feature Enhancement of Wear Particle Images Based on Curvelet Transform Method of Assembly Sequence Planning Based on Simulated Evolution Algorithm Intelligent Digital Voltage Meter Design and Implement Based on AD7715 Experimental Study of Coupling Fiber-Optic Vibration Sensor Based on Variational Theory Construction Control Analysis of Large Span Reinforced Concrete Arch Bridge Influence of Strip Wave-Shape upon Running Deviation inside Continuous Annealing Line Development of Instrument Cluster Simulation System Based on Canoe Integral Algorithm for Generating Anti-Aliasing Circle Based on Bresenham Algorithm An Immune-Based Node Localization Algorithm for WSN Geometric Calibration of Machine Tool Based on Auto-Trilateration Communication of Double-Robot Polishing System Fuzzy Comprehensive Evaluation on the Projects Risk Based Set Pair Analysis Equipment Fault Diagnosis Based on Incomplete Rough Sets Theory A Dynamic Data Fragmentation and Distribution Strategy for Main-Memory Database Cluster Heat Transfer Simulation and Optimization of Cooling System for Micro Wankel Engines Design of UART with CRC Check Based on FPGA Electronic Compass Calibration in Pedestrian Navigation System An Image Segmentation Method Using Image Enhancement and PCNN with Adaptive Parameters CNC Transformation Method for the Study Ground Penetrating Radar Imaging Based on FDTD Migration Method Full-Column Rank Solutions to a Nonlinear Matrix Equation Diagnosis of Incipient Failure of Gearbox Based on Signal Enhancement Technologies Design of Developing Platform for Equipment Management Based on Workflow Technology Characteristics of Electromagnetic Waves Propagation in Corridor for High-Rise Buildings Design and Implementation of Monitoring System Based on MSP430 Determination of the Total Ginsenosides in Ginseng Using the UV Spectrophotometer and Evaluation of the Measurement Uncertainty Control System Design of Intelligent Water Meter Design of Serial Communication Monitor System of Excavator Based on LabVIEW Detecting Object by Affine Transform Using Line Briefly Discussing on Red Clay in Highway Subgrade Filling Treatment Method A High Resolution and Full Information Magnetic Field Measurement System Feedback Filter PID Control for Integrator and Time Delay Processes Dynamic Modeling and Motion Simulation of a Movable-Winged Underwater Glider Designing and Simulation Testing of Kilowatt Switching Power Supply Transformer An Antisubmarine Detection Method Using IR Spectrometer in Ocean Remote Sensing Dynamic Characteristics of Linear Rolling Guide Joint Based on Contact Stiffness Battlefield Acoustic Target Localization in Electronic Sentinel System An Algorithm for Seeking the Minimal Cost Maximal Flow Based on Petri Net Based on the Fractal Technology of Bad Data Detection Method in Power System Application of Combination Forecast Model in the Medium and Long Term Power Load Forecast Design of Programmable Ship Navigation Light Controller An Extensional Clustering Algorithm of FCM Based on Intuitionistic Extension Index An Image Repair Method Based on Grid Extraction Dilemmas in Digital Forensics for Computer Equipment Security and Maintenance in Remote Ships Backstepping Sliding Mode Control for Rocket Launcher Alternating Current Servo System An Energy-Balance Based Distributed Topology Control Algorithm for Wireless Sensor Networks An Improved Covering Fuzzy Rough Set Model A Method of Multi-Classifier Combination Based on Dempster-Shafer Evidence Theory and the Application in the Fault Diagnosis A Method of Fault Detection and Diagnosis Based on Time-Frequency Analysis A Real-Life Mobility Patterns Based Routing Protocol in Delay Tolerant Mobile Sensor Network A Noninvasive Sound Wave Temperature Measuring System Software Design A Novel Traffic Prediction Method Based on IMF A Novel Variable Step Size LMS Algorithm Based on Modified Hyperbolic Tangent and Its Simulation An Improved Two-Phase GAI Particle Swarm Optimization Data Clustering Algorithm Study on Technique of Tolerance Optimal Allocation Based on Adaptive Genetic Algorithm Study on High Frequency Hydraulic Exciter Based on Rotary Valve Control The Security Measures of FCS in Power Plant Simulation and Analysis on Pressure Resistance Experiments of Automotive Body The Building of Accounting Information System Based on REA Model Study on Automatic Measurement of Small Angles The Design of Transmission Line Monitoring System Based on Wireless Sensor Network The Study on Signals Control System of Wet Dual-Clutch Automatic Transmission Shift Process Optimization of Regulation Methods in District Heating Systems Analysis of "Distance-Loss" Model Influence Factors in Vehicular Ad Hoc Networks Transformer Winding Deformation Fault Diagnose Based on FRA and Energy Feature Extraction by Wavelet Packet Study on EGR Control Strategy for Vehicle Diesel Engine Based on Experiment Robust Predictive Control for Uncertain Time-Delay Systems with Nonlinear Disturbance The Numerical Simulation of Flow Field of Target Type Impinging Stream Nozzle Based on Fluent Research on Driving Fatigue Monitoring Based on Tree-Structure Classifier The Improvement of Pseudo-Boolean Satisfiability Algorithm for FPGA Routing Thermal Error Modeling and Compensation of a CNC Machining Center The Temperature Measurement Method Based on the Image of Mechanical Part during Heating Treatment Study on Fractal Box Dimension and Its Application to Fault Diagnosis of Hydraulic Pump Stress Analysis of RC Column under the Isolator in the Base-Isolation System Robust Stabilization for a Class of Switched Nonlinear Systems The Application of Microcontroller Timer/Counter in Speed Measuring/Speed Regulation System The Study of SPWM Controller Based on TMS320F2812 DSP Study on Boring Small Hole of Stainless Steel Dryly by Ultrasonic Vibration Double Cutter Study on Compensation Based on Neural Network Control of GPC The Control System Design Based on PLC for Low-Pressure Sealed Cabin Research and Design of the Remote Fault Diagnosis System for Complicated Equipment Based on Intelligent IETM Single-Chip Fuzzy Control of Diesel Engine Electronic Speed Governor Study on Processing Quality Monitoring Technology for Gun Barrel Caliber Navigation Condition Effect on Ship Motion in some Sea State The Study of the SVPWM Realization Method Based on DSPIC30F6010A Tool Wear Prediction Based on Fuzzy Cluster Analysis Research on Thermal Characteristic and Thermal Compensation Technology of Spindle System of CNC Machine Tool Research on Goniometer Fault Detection of a Certain Missile Based on Wavelet Analysis 3D Motion Parameters Estimation Using MRF and Neural Network The Grey Relational Analysis of Driving Forces for Water Consumed Structure Research and Application of Reverse System Based on Bluetooth Technology Study on the Application of Segmentation Algorithm Based on Medical Image Fusion The Statistic Definition and Research of the One Class Similar Special Curve The Design of GPS Digital IF Signal Simulator Research on Fire Detection in Coal Mine Based on GA-Improved Wavelet Neural Networks Transient Dynamic Analysis of Mechanical Structure of Multi-Axis Force Sensor and Measuring Circuit Coupling System Simulation Research on SUV Passenger Car Rear End Impact The Multiple AC Servomotors' Synchronous Operation Control System Based on DSP and FPGA The Study on Automobile Electronic Key Systems using Numerical Analysis Research on New Mechanical Seismic Simulation Platform Exciter The Management Cost Forecasted of Retaking Expired Operating Highway Based on the Grey Model GM (1,1) Speech Enhancement System Based on Lyapunov FXLMS Algorithm TSP24 System and Application in Construction of a Highway Tunnel Production Research of PLC-Based Disc Motor Punching-Winding Machine The Analysis of Fiber Positioning System Temperature The Application of Improved Genetic Algorithm in Distribution Network Reconfiguration Design of Measuring and Evaluating System of Airport Support Vehicle Training Simulator The Optimization Design of Vacuum Chamber in Vacuum Electron Beam Welding Machine Simulation Analysis of Production Control Methods in Manufacturing Systems An Improved Generalized Predictive Control for AUV Yaw Analysis of Directional Accuracy of Three Single Arrays Air Targets Recognition Based on Feature Analysis and Particle Swarm Optimization K-Means Clustering The Application of Double Closed-Loop Unit Gain Negative Feedback and BP Neural Network Controller in Single Inverted Pendulum The Design and Test for the Intermittent Work-Style Drying System A Trinocular Stereo-Matching Algorithm Based on Adaptive Support-Weight for Mobile Service Robot Stage Boom Machinery Control Based on Adaptive Fuzzy PID The Study on Oil Pollution Environmental Treatment Based on Micro-Biological Degradation The Research Status and Development Trend on the Test and Diagnostic Techniques of Engineering Machinery A Circuit to Realize the Repetitive Operation of Underwater Corona Discharge in the Application of Water Treatment The Study on Starting Control of ER Clutch for Vehicle Research on Fault Knowledge Acquisition Base of Circuit Simulation The Design of Web-Based Ear-Nose-Throat Diagnosis System The Design of Interference Generator for Grid Based on 89S52 Research on Deviation Correction Control Technique of the Paver's Traveling System Study on Regenerative Braking Control Strategy for EV Based on the Vehicle Braking Mechanics Research on Navigable Width in Winding Channel Task Assigned Algorithmic for Multi-UCAV Based on Auction Mechanism The Study on Oral Cancer Detection Based on 3-D OCT Image Surface Acoustic Wave Based Radio Frequency Identification Study of Grating Signal Processing Based on FPGA Sonar Image Registration Based on Improved PSO and Powell Hybrid Algorithm Application of TSP Tunnel Geological Prediction for Case Study Rapid Foreground Extraction Algorithm Based on Trimap The Research of Input Ground Motion on Seismic Fragility Analysis of Bridges New Hardware Engine for New Genetic Algorithms A Modification of Newton-Type Method with Sixth-Order Convergence for Solving Nonlinear Equations Research on Dynamic of Wall Loading of the Discharge Chamber under Electro-Hydraulic Breakdown in Liquid Study on Clutch Control Strategy of Dry DCT Launching The Study on Physical Training Segment Parameters Monitoring Design of Passive Acoustic Location System Based on Double Arrays Research on the Lane Detection Algorithm Based on Zoning Hough Transformation Design and Realization of FIR Digital Filter Based on MATLAB Chapter 2: Manufacturing and Design Science A Kind of Spatial Angular Magnetic Gear Transmission A Data Warehouse Cleansing Approach Based on Mathematical Association Rules A Meshfree Weak-Strong-Form Method for Magnetohydrodynamic Flow in a Pipe A Linear Algorithm of Spatial Straightness for Five Points A New Method of Screw Extrusion Molding Pressure A Improved Method of Enhancement of Video Image in the Coal Mine A Portable Digital Torsional Vibration Analysis System and its Signal Processing A Transformation Method between PLC Ladder Diagrams and Instruction Lists Using Recursive and Stack Algorithms Accurate Calculation and Control of Dry Dual-Clutch Torque during Shifting Process A Study of Sustainable Design Based on Unconscious Behavior A Research on the Aided Method for Design of the Hot Runner Structure of Injection Molds An Approach to Interior Ecological Design Concepts An Approach Dealing with Wrist Singularity of Six-DOF Industrial Robots An Arithmetic Function and the k-th Power Part of a Positive Integer An Indirect Measurement of the Slender Magnet Remanence with a Optical-Pumping Magnetometer A Study on Model of the U.S. National Environment Management A System Approach to Risk Management in the Age of Supply Chain Complexity Analysis of Brockmann's Posters Based on Geometry of Design Analysis of the Existent Problem and the Policy Suggestions for Chinese New Energy Industry An Improved Method of Solving Contact Trajectory Boundary for Spiral Bevel Gear A Study on Time Synchronization Algorithm Based on Energy Effective Strategy An Optical Imaging Simulation Method for Inverted Microscope and its Application in Automatic Cell Manipulation Analysis for Blade with Centrifugal Preload under the Impact Stress Wave A Study on the Controllability of Deepwater Manifold during Launch through Pendulous Installation Method A Supply Chain Collaboration Model Based on System Dynamics Analysis of the Greenway Construction in Western Countries Analysis of Fault Diagnosis for Rolling Bearing Based on EMD and Local Smoothness Index Analysis of Vortex-Excited Resonance for Main Stay Bar on One Large-Span Bridge Application of Apriori Algorithm in Diagnosis of Stroke Application of Improved Analytic Hierarchy Process in Industrial Design Evaluating for Product Design An Acoustic Experimental Study on Sound Acquisition in Standard Chinese by Native Speakers of Uyghur Application of the Reverse Engineering to 3D Reconstruction on a Denture Bifurcation Characteristics of Unbalanced Rotor - Bearing System Analysis of Trust Chain Transitivity in TCG Comprehensive Quality Evaluation Oriented to Product Lifecycle Application of TSP in Construction of Qiupi Tunnel Application of Fiber Optical Sensor in Thickness Measurement of Mechanical Seal Comparative Study on the Earthquake-Proofing Performance of Chinese and Japanese Building Structures Control and Simulation Research on Interactive Oscillation of Operating Power of Diesel Generator Sets in Parallel Effect of Die Radius and BHF on Formability of the Corner of Box-Shaped Parts in Deep Drawing Processes Design of New Type Involute Planetary Gear Reducer of Small Tooth Number Difference Design, Lift Prediction and Test of a PZT Drive Mechanism of a New Concept of Micro Flapping Wing Rotor ANSYS Simulation Analysis of the Tri-Axial Pipeline Magnetic Flux Leakage In-Line Inspection Based on the Condition of the Equipment Management Analyze the Efficiency on FDM Process of Rapid Prototyping Technology with the New Filling Method Ecological and Energy Saving Ideas Incorporated in Residential House Design Digital Design Technology in the Contemporary Architecture Design Method of Fly Ash Concrete Mix Proportion Based on Stable Paste-Aggregate Ratio Automatic Dredging Robot for Metallurgical Drainage Trench Based on Virtual Design Technology Based on Genetic Algorithms and Artificial Neural Network Algorithms to Optimize the Structure Design and Implementation of Crane Design of a High-Speed Reconfigurable Serial Fieldbus with Reliable Communication Based on FPGA Based on the Matlab Simulation of the Maxwell Distribution Design and Compiling of Laser Propagation Simulation Software in Atmospheric Environment Design of a Coaxial Positioning System Based on Flexible Decoupling Beams Design of Broadband Response Two Degrees of Freedom Piezoelectric Vibrator for Energy Harvesting Damage Identification for Curl Tube Structure Based on Modal Flexibility Curvature Finding Principal Axes of Complex Plane Rigid Body with Rending-Image of MATLAB Customer Requirement Driving New Product Concept Generation Method Based on Naive Bayes Cluster and RST Finite Element Analysis of Stress for Nozzle Zone at Channel of Pressure Vessel Experimental Comparison of Diesel Engine's Mounts Cost Estimation Model Based on Improved Spreadsheet Algorithm for Assembly Line Manufacturing Systems Design and Research of Double-Drum Winch for Lowering Mooring Anchor Chains Computing Profile Error of Scroll Wrap Based on the Method of Polar Radius Error Expression of "Vivid Inner Temperament" in the Contemporary Environmental Design Comparative Study on Optimization Design Methods of Steering Mechanism Calculation of Decay e in Small Neutrino Mass Limit in a Model of Right-Handed Neutrinos Failure Analysis of Laminates Single-Lap Adhesive Joints under Uniaxial Tensile Loading Experimental Study of Well Deviation Correction Model in Deviated and Horizontal Wells Production Profile Based on Vector Control of All-Electric Injection Molding Machine Control System Design Diesel Engine Cylinder Block Casting Process Optimization An Optimizing Strategy of Load Balancing Based on MSTP Intelligent Optimization of Green Logistics System for Agricultural Products Based on the Database Resource Mining Load Sharing of Parallel Shaft Split Torque Transmission System Design and Analysis of a Lower Limb Rehabilitation Robot Mechanical Kinematic Scheme Design of Automatic Piston Pin Sorting Machine Force Analysis Methods and Experimental Research on Double-Curved Arch Bridge Effect of Parameters on Strength of Composites Single-Lap Adhesive Joints Energy Saving Analysis of Solar-Powered LED Street Lighting Systems MASTA Software for Wind Turbine Gearbox Design Green-Efficiency Assessment of Chinese Industry Based on Principal Component Analysis and Super-Efficiency Data Envelopment Analysis On the Creative Design of Intellectual Property Protection Dynamic Characteristics Analysis and Optimization Design of Spindle Box with FEA Experimental Study of Heat Pipe Exchanger for High Power LED Cooling System Methods of Moving Boundary Based on Artificial Boundary in Heat Conduction Direct Problem Developing on Experiment System of Process Equipment and Control Engineering Based on PC and PLC Numerical Analysis and Test Research on Work Process of PSD in Pulse Solid Rocket Motor Fatigue Reliability Evaluation Model of Drillstring in Bending Section of Horizontal Well Design, Propulsive Force Prediction and Test of a Electromagnetic Drive Mechanism of a New Concept of Micro Flapping Wing Rotor Kinematic Analysis of a Planar Mechanism Driven by Two Orthogonal Layout Actuators Design of One Portable Maintenance Auxiliary Equipment Numerical Analysis of Thermal Response of UHTCs under Aerodynamic Heating Experimental Study on Torsional Vibration of Dual Mass Flywheel Fracture Reason Analysis of Coal Compactor Roller Shaft Numerical Simulation on Dynamic Analysis for Pipe Vibration Control Based on an Actively Generated Hydraulic Excitation Force Research of Technology of Virtual Building and Scene Roaming by Visual Basic Programming Methods Research for the Non-Circular Curve - The Oval, for Example Finite Element Analysis of the Hydraulic Pressure in a Large Heat Exchanger Experimental Study on the Dynamic Performance of Long-Span Steel Arch Bridge in Passenger Dedicated Line Realization of the Detecting Method for Aircraft Digital Image Transmission System Based on Multi-Processor Performance Analysis of Bionic Propulsion Device above Water in Different Parameters Numerical Simulation and Die Casting Process for Cylinder Appropriate Mass Flow Research of Lubricant for Different Oil Groove Type of Wet Multi-Disc Application of Kalman Filter in Brake Inertia Dynamometer of Motorcycle Modeling and Simulation of Inert Gas System for Dangerous Cargo Tankers Optimal Design Method of Fins in Automotive Oil Cooler Based on the Thermal-Hydraulic Performances Process of Micro-Simulation of Infilitration Clogging for Highland Reservoir Dam Foundation Research of Manufacturing Strategic Decision Based on the Competitive Strategic Situation Cognition Research on Energy Consumption Analysis Method Based on Improved Fuzzy Analytic Hierarchy Process (FAHP) in Iron and Steel Industry New Model of Waste Comprehensive Combustion Simulation of Coast Wind Farm Construction Design and Entity Modeling of Wet Double Clutch Finite Element Analysis of some Radial Tire Research on Playing Board Process of Kimono Sleeves with Triangle under the Armpit Based on CAD System Apply the Route Diagram of the Clothing Business Enterprise Sample Product Technique Level of the High Technology Exaltation Analysis Design of a Precision Three-Coordinate Measuring Machine Based on SCM Experimental Study on a Kind of Long Anchor Bolt Research on Ergonomic Design of Fascia Based on QFD and TRIZ Theory Navigable Flow Condition Numerical Simulation for Approach Channel of Tiangongtang Junction Experimental Study on the Mechanism of Axial Ultrasonic-Assisted Grinding Parametric Design of Spiral Bevel Gear Based on Pro/E Finite-Time Stabilization for Singular Linear Time-Delay Systems with Time-Varying Exogenous Disturbance Multiple Integrators Control Based on Feature Data of Controlled System with Random Disturbance Security Issues of RFID Technology in Supply Chain Management Design of Portable Comprehensive Test System of Aircraft Wire Mobile Robot Movement Analysis and Design Performance of a Parabolic Flexible Joint Using Compliance Closed-Form Equation Member Behavior-Oriented Simulation Research for Supply Chain Coordination Research on Stray Current Monitoring of Subway Tracks Optimization Design of Single Steering Trapezoid Mechanism of Vehicle Based on MATLAB Research on the Simulation of TT&C System of Space Survey Vessel Research on a Combined Directional Instrument of DMC and Gyro for Vehicles Multidisciplinary Object Compatibility Design Optimization Based on Simulated Annealing Algorithm Outstanding Influence Factor Research of Wet Friction Thermal Field Based on iSIGHT Grey Correlation Analysis of the Impact of Rate on Urban Transport Structure Experimental Study of Effect Factors on Performance of Heat Dissipation of HP Heat Exchanger for LED Cooling System Research and Application of Collaboration between Design & Manufacturing for Precision Forged Blade Road Stress-Absorbing Interlayer Mix Design Method Finite Element Analysis on Bending Stress of Generating Spur Bevel Gear Based on ANSYS Ecological Design for Indoor Interior Surface of Residential Building Optimal Design of High Power LED Driving Circuit Research of Three-Dimensional Simulation Tree Based on Iterated Function System Research on Prospect and Strategy of Civil Engineering Informatization Furniture Form Bionic Design Methodology Study for Spray Experiment and Simulation of Nozzle on Icing Wind Tunnel Smart Home Energy Saving Switch Controller Research on Environmental Adaptability Evaluation of Engine Based on Fuzzy Evaluation Structural Damage Detection of Continuous Beam by NExT Based Wavelet Packet Energy Design of Conjugate-Cams for High-Speed Paper-Separation Mechanism Safety Recognition Model of Urban Railway Level-Crossings Based on Attribute Mathematics Method The Integration on Electrical Control Systems Based on Optimized Method The Method of Automatic Counting of Circular Objects Based on the Matching Method of Fuzzy Circular Template Simulation Analysis of a Novel Magnetic Gear Study on Die Surface Coating by Electric Discharging Machining Research and Design on Monitoring System of Simple Bridge Based on Virtual Instrument Technology Fabrication of Flaky Magnetic Composite Particles Talk about Structural Design of High-Rise Buildings The Experimental Study about Relationship of Centrifugal Fan Shape and Tuyeres Wind Speed The Simulation and Comparison of Synchronous and Serial Regulating Gates Method in the Emergency Status of Long Distance Water Project The Optimal Design of Injection Mold Cooling System Optimized Design for the Number of Injection Mold Cavities The Study and Simulation on Campus Network Intrusion Detection System Research on Dynamic Characteristic of the Rotors Connected by the Misaligned Gear Coupling The Study on Man-Machine System Modeling Based on Computer Aided Ergonomics Design The Investigation of Performance of Gas-Spray Water Quenching The Reconstruction Scheme Design and Experiment of the Height-Adjustable W-Beam Guardrail Optimal Design of a Planar Five-Bar Parallel Manipulator Driven by Two Orthogonal Layout Actuators The Strength Analysis of Aircraft Landing Gear Strut Based on ANSYS Study on Mechanical Behavior of Regenerated Concrete Based on Construction Garbage The Study on Low-Carbon Building Technology Using Natural Air Conditions Research on Structure Design and Kinematics Equation of Restaurant Service Robot Manipulator The Safe and Environmentally Sound Recycling of Ships and its Application in China The Research of Three-Dimensional CAD/CAPP Technology Based on Feature The Study on Building Structure for Vibration Control Strength Analysis of Pressure Vessel with Big Openings Optimal Design for Broadband Dynamic Damper Shaft Vibration Modal Analysis of Turbine-Generating Set Fracture Reasons and Improvements for the Running Gear of Shearers Secure, Robust and Adaptive Echo-Based Information Hiding in Voice Communications for Equipment Maintenance in Marine Ships The Development of a Multi-Functional Composite Embedded Smart-Skin Antenna Structure The Finite Element Analysis of Piston under Thermal Load Based on UG/ANSYS Study on the Physics and Mechanical Properties of Freeze-Thaw Soil and Undisturbed Soil The Design of the Ethernet Meter Reading System Based on Broadband Power Line The Study of Super Element Cable Structure Optimization of a Screw Pump Unit Based on Load Identification Virtual Prototype Design of No-Tillage Planter Based on Solidworks The Parameters Identification of Airplane Flutter Model Based Global Nonlinear Separable Least Square Method Study of Process Flow and Layout of Broiler Production Weight-Reduction Optimization Design for Milling Planer Bed Based on Finite Element Analysis Study on Process Control Experimental System Based on MCGS The Preliminary Study of Food Waste Processing Equipment Reliability Design The Integrated Structure Design for the Transmitter of the Companion Satellite Optimization of Vibrating Parameters for Large Linear Vibrating Screen The Embedded Data Collecting System of Multi-Channel Based on ARM Research on the Rapid Response Production Preparation System for Compressor Blades of Aero-Engine Design of a Domestic Wastewater Reuse System Vehicle Loading Length Measurement System Research Based on TRIZ Stability Prediction Model for Milling Process The Application of Proliferated Form in Designing Product Modeling Study on Demand Bill of Electric Vehicle in China's Carbon Emission Reduction Environment The B/S Structure Design of Firefighting Equipment Management System for Fire Brigade Research on Punching and Hot-Pressing Process and Related Mechanism for Easy Tear Lid Study on Ship Motion under Internal Sloshing Impacts The Finite Element Simulation Analysis of Tapered Bearing Retainer and Optimized Selection of Mould Parameters The Study on EDA Tools for Antenna Design The Application of Water-Cooling Pipes in the Mass Concrete of Hu Lu Shan Wan Crossing Sea Bridge The Construction of Warning Model for Technology Patent on Environmental Engineering Design of Numerical Control Machine on Human-Centered Design and Man-Machine Engineering Research on Concept Design of Hot Runner Based on Axiomatization and Knowledge Unit The Track Structural Design and Finite Element Analysis of the Track Type Thinning Shredder The Single Straw Composite Board Manufacturing Process Research Research on the Realizing Mechanism of an Industrialized PL-ISEE Database Platform Test on the Shape Schemes of Jilintai-I Hydropower Station Flood Discharge System Reverse Engineering of Artwork Teacup Study on Structure of Articulated Needle and its Obstacle Avoidance Research on Flexible Bonnet Polishing Process Method and Related Technology Selection of Outsourcing Supplier Based on AHP Test System for Digital General-Purpose Integrated Chip Research on Cooperative Equipment Maintenance Technology Supported Platform The Application of the Vector Control in Centrifuge Research of Geological Exploration Information System Based on Three-Tiered C/S Architecture The Single Pipe Double Cavity IMS Contraband Explorer for Trace Detection Studies on the Dynamic Transform of Database Based on Design Process Synthetic Evaluation of Warfare Capability of Submarine Launched Torpedoes Based on Projection Pursuit Model The Model Analysis of Mobile Emergency Platform Car Frame Based on ANSYS Linear Regression Calculation and Energy Saving Analysis about Thermotechnical Parameters of Target Type Impinging Stream Nozzles Nuclear Polarization and - Atom Energy Levels The Finite Element Analysis on the Submarine Pipeline under the Seismic Loading Strength Analysis of Flexure Hinge Mechanism in XY Table Research on Aerodynamic Noise of Base Styling Characteristics of Car Rearview Cover Research on Technology of Responding for Multi-Specification and Small-Batch Mechanical Production Quotation Based on Feedback Amendment Research on QoS of ertPS of 802.16e Scheduling Algorithms The Functional Configuration Mapping for Cloud-Based Mass Customization Service Platform Study of Performance of US-FE-LSPIM QUAD4 Element on Mesh Distortion Cause Analysis of Cracks Found on Horizontal Truss of Quayside Container Cranes The Discharge Characteristic Analysis and the Simulation of Axial Piston Pumps FEM Analysis of a Diesel Engine's Cylinder Head Comprehensive Optimum Design of Working Device of Loader Based on Sensitivity Emulation Analysis for Construction Process of High-Rise Building Chapter 3: Material Engineering and Science A Comparative Study on Emergency Materials and Equipment for Oil Spills A R-p-da/dN- K Surface Formula and the Statistical Analysis of Effects of Stress Ratio on Crack Growth for GC4 Steel Adsorption of Heavy Metal Ions with Magnetic Carbon-Coated Iron Nanoparitcles Application of the High Strength Steel in the Automobile A Review on Mechanical Properties of Freestanding Diamond Films Analysis of Disturbance Signals in Steel Rolling Process Approach to Modified Mechanism of Eutectic Si in Alumina Fiber Reinforced Al-Si Alloy Composites Characteristics and Process Optimization of Hot-Air Drying Pepper Development of High Silicon Nickel-Copper Alloy NCu30-4-2-1 Extrusion Bars Characterization and Properties of CrN and CrBN Films Effect of Strip Defect on Cleavage Fracture Toughness of Steel 16MnR Effect of Growth Parameters on Single Crystal Diamond Deposition by DC Arc Plasma Jet CVD A Portable Apparatus for Colloidal Gold Test on Clenbuterol Apply Artificial Neural Networks to Estimate Stress Distribution around Holes Edge in Composites Dynamics of Phase Transformation of Cu-Ni-Si-Zr-Cr Alloy during Aging Precipitation Application of R/S Rheometer in Low Temperature Drilling Fluid Rheology Determination Effect of Rare Earths Addition on Mechanical Properties and Wetting Behavior of Sn-2.5Ag-0.7Cu Lead-Free Solder II. Characterizations of Alginate-Chitosan Hydrogel for Wound Dressing Application Evaluation of Glass-Forming Ability for Metallic Melts by Phase Field Approach Effect of Chelating Pretreatment on Photocatalysis Bleaching Magnetization Evolution with the Doping Element in Double Perovskite Controllable Synthesis of CaMoO4 Microcrystals with Tailored Morphologies and Optical Properties Fundamental Research on Development of Micro-Actuator Driven by Liquid Crystal Dynamic Performance of the Steel Tube Filled with Steel-Reinforced Concrete Finite Element Analysis Influence of Fluoride Ion on the Electrochemical Properties of Al/ -PbO2 Electrode Efficient Synthesis and Photochromic Properties of a New Unsymmetrical Photochromic Diarylethene Base on Naphthalene Unit Application of Laser Heat Treatment Process on the Surface Treatment of Pipe Threaded On the Stability Capacity of Steel Tube Filled with Steel-Reinforced Concrete Column Subject to Axial Compression Distributed Control System of Ceramic Material Kiln Based on MVC Environmental-Friendly Electropolishing of 304 Stainless Steel Surface Cytotoxic Responses and Potential Health Effects of Nanosized ZnO on Tetrahymena Thermophila Design of CO2 Heat Pump Water Temperature Control System Based on C8051F500 SCM and Electronic Expansion Valve Constant-Wavelength Synchronous Fluorescence Spectrometry for the Determination of Polycyclic Aromatic Hydrocarbons in Water Samples Development of Experimental System in Organic Synthesis Low Temperature Large Scale CVD Synthesis of Nano Onion-Like Fullerenes Automatic Classification of Welding Flaws in Ultrasonic Testing Using the Layer Multi-Class Classifier Based on v-SVM Extremely High Efficiency Orange Phosphorescent Organic Light-Emitting Devices Nonlocal Size Dependence of a Softness Nanobeam with Large Axial Tension under Various Boundary Conditions Effect of Acid Pretreatment on Photocatalysis Bleaching Melt Flow Type and Physical Model of Semisolid Rheo-Casting Process by Cooling Sloping Plate Fracture Analysis near Interface Crack Tip for Mode I of Orthotropic Bi-Materials Optical Properties of -Si3N4 Studied from First-Principles Method Effect of Sub-Temperature Quenching Temperature on Microstructure and Property of 35CrMo Steel Ionic Liquid Assisted Sol-Gel Prepared Ce-Doped ZnO Effect of Thermal Process on the Microstructure and Property of Si/Al Composite with High Si Content Facile Synthesis and Enhanced Photocatalysis of Sm Doped TiO2 Intelligent Materials and Contemporary Industrial Design Drilling Simulation on Carbon Fiber Reinforced Plastics and Aluminum Laminated Composite Material Engineering for Low Power Consumption and Multi-Level Storage in Lateral Phase-Change Memory Influence Mechanism of Curing Shrinkage on Tensile Shear Strength of Isotropic Conductive Adhesive Discuss on Green Shipbuilding Technology: Design and Material Photochromic, Kinetics, and Fluorescence of a Novel Diarylethene Microstructure and Properties of TiO2 Thin Films Doped with Ni Low Temperature Synthesis of Nano-Carbon Materials Using a Water-Soluble Catalyst Support by Chemical Vapor Deposition Low Temperature Synthesis of Onion-Like Fullerenes Using Aluminum Hydroxide Supported Iron Catalyst Microstructure Formation Mechanism of AZ31 Magnesium Alloy Processed by Rheo-Forming Material Constants of TC18 Titanium Alloy Deformated in + Region New Technics of Restoring High-Strength Steel Parts on Airplane by Brush Plating a Composite Coating of Diamond Finite Element Analysis of the 320mm Hydraulic Support Column Modeling of the Mixing of Composite Solid Propellant Slurry in a Kneading Mixer Phase-Field Simulation of Interface Effect during Grain Nucleation LiFePO4 Battery Information Integrated System Influence of Alloying on the Uniformity of Strength and Structure of Gray Iron Numerical Simulation Analysis of the Cold Bending Forming Technology Based on DEFORM Preparation and Character Measurements of ZrO2 Films for RF Magnetron Sputtering Preparation and Characterization of Glass Flake/Nano-TiO2 Compound Particle on Low Temperature Flame Retardancy of Lanthanum Phosphinate in Combination with Intumescen Flame-Retardant in Polypropylene Preparation and Spectral Analysis of Light Conversion Advanced Invisible Falsification-Resistant Ink Preparation of Tin - Titanium Alloy in Powder Metallurgy Method Preparation and Swelling Dynamics Characterization of Poly(N, N-Diethylacrylamide-Co-Itaconic Acid) Intelligent Hydrogels Photoinduced Anisotropy in a New Diarylethene Bearing Five and Six-Membered Aryl Microstructure and Electrical Properties of ZnO-Bi2O3-Based Varistor Ceramics by Different High-Energy Ball Milling Time Preparation and Basic Characterizations of Alginate-Chitosan Hydrogel Normalized Fuzzy Control of High Density Aquiculture's Dissolved Oxygen Motion Characteristics of Composite-Type Sea Cage under Pure Wave Pythagoras Number Theory and the Scientific Beauty of the Theory Origin Standard Plate for Radar Absorbing Materials' Measurement in 3 mm Band Research on Process of Copper-Infiltration on 304 Stainless Steel by Double Glow Plasma Technology Processing Maps for TC18 Titanium Alloy Deformed in + Region Researches of a Magneto-Rheological Fluid Damper with External Coil Based on Electromagnetic Finite Element Analysis Research of the Morphology and Distribution of the Primary Silicon in Al-18Si Alloy under a Gradient High Magnetic Field Preparation of Mesoporous TiO2 Thin Films and Research on Ultraviolet Photolysis Degradation of Dioxins from MSW Ash Static Load Test and Analysis on Completed Deck Arch Bridge of Large-Span Reinforced Concrete Recognition of Partial Discharge Pulse Based on Short-Term Energy and DTW Preparation and Characterization of Resveratrol-Loaded Hydroxylpropyl- -Cyclodextrin Preparation and Research of Short Carbon Fibers Network Structure Antistatic Composites Microwave-Assisted Hydrothermal Synthesis of Ag/BiVO4 Architecture with Enhanced Photocatalytic Activities Research on the Method of Measurement of Nonlinear Refractive Index of Optical Materials by Interference of Capillary Preparation of Conductive Films by In Situ Polymerization of 3-Alkylthiophene with Soluble MWNTs Preparation and Formaldehyde Emission and Bonding Performance of Novel Modified Urea-Formaldehyde Resin Adhesive Research on Lubricating Property of Piston Pin Preparation of -PbO2 and -PbO2-MnO2 Coating on Stainless Steel Substrate Optical Spectrum Analyses of ZnS1-XSex Ternary Material Preparation and Characterization of Attapulgite Modified by KH-570 for Formaldehyde Adsorption Optimization of Microwave-Assisted Extracting of Proanthocyanidins from Purple Cabbage and Evaluation of Antioxidant Activity In Vitro Research on Metal-Rubber Composite Damping Steel Plate Application in Acoustic Bridge for Double Cylindrical Shell Self-Lubricating SiC/PTFE Composite Coating Formation on Surface of Aluminium Alloy Properties and Application of Characteristic Polynomial Sonochemical Synthesis and Characterization of Bismuth Aluminate Nanocrystals Preparation and Properties of Chrome-Free Colored Na3AlF6 Conversion Coating on Aluminum Alloy Static Stiffness Analysis for the Parallel Bonding Mechanism of IC Chip Die Self-Propagating High-Temperature Spraying Synthesis of Ferrites Hollow Microspheres Study on Activated Carbon Prepared from Coking Fly Ash with KOH Activation Study on Productive Technology of Greensand Mold and Thick-Walled Small Piece for Nodular Cast Iron Study on Dyeing Technology Affecting the Dye-Uptake of Bamboo Pieces Study of an Inorganic Ion Exchanger Al1.25Fe0.75(PO4)2 Study on Impacting Performance of Bamboo-Plastic Composite Semiconductor Assembly and Test Production Line Simulation Technology Study on Photometric Performance Attenuation Law of Retroreflective Materials for Road Traffic Study on HVOF Sprayed Nickel Coated MoS2 Coatings Study on Automatic Calibration System of Multi-Layered Laminated Thin Film Thermocouple Cutting Temperature Sensor Study on Mass Segregation Phenomenon of Al2O3 Ceramic Slurries during Centrifugal Slip Casting Study on Preparation of Gradient Porous Ti by Powder Metallurgy Method Study on Damage Assessment of Reinforced Concrete Structure after Fire Research Progress of New Methods for Toughening Epoxy Resin Study on the Mechanism of Cutting Fracture of H700X300 H-Beam Research on the Determination of Calcium Content in Calcium Tablet by Microscale Chemistry Experiment Review of Hygrothermal Effects on Carbon Fiber-Reinforced Composite Materials Study of Anticorrosive Properties about Epoxy Heavy Anticorrosive Over-Rust Primer/IPN Topcoat Soybean Protein Acrylates Adhesive Research Progress Synthesis and Electrochemical Performance of Li3V2(PO4)3 Cathode Material by Microwave Method Study on the ASTM Standard E826 and its Role in Testing Materials Homogeneity Startup Research of DIC Hydrolysis Acidification Reactor in Printing and Dyeing Wastewater Treatment Study on the Deformation of the Prestress Frame of Open-Die Forging Hydraulic Press with Different Operating Modes Study on the Factors Influencing Plating Coat Thickness in Ultrasonic-Aided Hot-Dip Aluminizing Facing Remanufacturing Study on the Key Technology of Intelligent Energy-Saving Building Glass by Nanometer Method Study on the Ductile-Mode Milling of Brittle Ceramics Startup Research of Integrated Anoxic Aerobic Process in Printing and Dyeing Wastewater Treatment Synthesis and Characterization of Modified Epoxy-Silicone Resin Synthesis and Deswelling Behavior of Intelligent Thermosensitive Poly(N, N-Diethylacrylamide-Co-Itaconic Acid) Hydrogels Synthesis and Properties of a New Unsymmetrical Diarylethene Bearing Two Thiophene Rings Synthesis and Properties of a Novel Unsymmetrical Diarylethene with Five and Six Ring Aryls Synthesis of a Novel Photochromic Fluorescence Switching Diarylethene for Optical Recording Storage Study on Rupture Curing and Monitoring of Shaft Lining in the Special Stratum The Basic Properties of the Composite Straw Veneer Synthesis of Gold Nanoparticles by Using a Bolaform Schiff Base Amphiphile at Liquid-Liquid Interface Synthesis, Characterization of Poly(Aryl Ether Sulfone)s Based on Naphthalene Isomers Synthesis of Al1.75Fe1.25(PO4)3 and its Selectivity to Li+ Exchange Study on the Dynamic Lubrication Characteristics of Water Lubricated Rubber Bearing Study on Technology of Food Waste Biological Aerobic Composting The Damping Analysis of the Laminated Composite Plate Considering Geometric Nonlinearity Synthesis, Optoelectronic Properties of a Novel Photochromic Diarylethene Bearing Phenyl and Benzofuran Group The Analysis for Evaluation of Ceramic Tile's Color Difference Based on CIELAB Color Space Synthesis, Properties and Application in Optical Memory of a Photochromic Diarylethene Bearing Pyrimidine and Pyridine Ring The Design of the Wind-Light Complementary Street Lamp The Damped Eigenfrequency Analysis for an Elastic Disk Clamped by a Water-Filled Cylinder The Adhesion Testing and Analysis for NiCr/NiSi Thin-Film Sensor The Environment-Friendly High-Elasticity Asphalt Mixture Using as Stress Absorbing Layer The Building of Debris Flow Monitoring and Warning System Based on Zigbee Protocol Using Multi-Sensor Technology The Effect of Microstructure on Mechanical Properties and Fatigue Crack Growth Behavior of TC4-DT Alloy The Catalytic Properties of the Anodic Aluminum Oxide Template in Synthesis of Carbon Nanotubes The Casting Process Design and Simulation of the Rear Wearing Plate of 65ZGB Slurry Pump The Preparation of O-Carboxymethyl-Chitosan and its Particles The Numerical Simulation on Steam-Water Two-Phase Flow Field of Car Exhaust Pipe The Intelligent Bridge Health Monitoring System Based on Optical Fiber Sensing Technology The High Stability Mesoporous MgO-ZrO2 Materials as CO2 Adsorbents The Prospect of Application of Nanometer Material in Oil Exploitation Synthesis of Carbon Spheres with Controllable Size Distribution by Chemical Vapor Deposition The Preparation of Platinum Nanoparticles on Titanium Using Chemical Reductive Growth Procedures The Research of -SiCp/Al Electronic Packaging Composites Fabricated by Pressureless Infiltrating The Interface Design of a Dot Matrix Liquid Crystal Display The Constraints on the Parameters in the Decay Process e and 3e at Tree Level in the Hung Model The Study of Counting the Strapping Steel Pipes Based on Image Recognition The Influence of Decomposition and Slagging of Limestone to Temperature in Convertor The Growth of Si on SiC Complex Substrate by CVD The Influence of the Post-Annealing Temperature on the Crystalline Orientation and the Crystallinity of PZT Films The Studies on Photolysis of Dioxins from MSW Ash by TiO2 Thin Film Codoped Co and N The Method Research of Parameter Identification of Li-Ion Battery Base on Least Square Method The Study on Microstructure and Thermal Expansion Property of SiCp/Al-30Si Composite Material Prepared by Hot-Pressing The Synthesis and Ion-Exchange Property of Li+ Memorized Inverse Spinel Al0.75Fe1.25(PO4)2 Ti Microalloying Effect on Corrosion Resistance and Thermal Stability of Cu45Zr48Al7 Bulk Metallic Glass Theoretical Investigations of the High-Pressure Optical Properties of -Si3N4 Mold Material Selection and Development Trends Virtual Prototype Simulation of Fine-Adjustment System Kinematics for Segment Erector of Tunnel Boring Machine Use of Versatile Binaphthalene Derivative in Chromatic-Stability Non-Doped White Organic Light Emitting Diodes The Influence of Different Ph Values and High Concentrations of Na2SO4 and NaCl on the Photocatalytic Oxidation (PCO) of Methylene Blue (MB) by Aqueous Suspension of Nano-Sized TiO2 The Preparation of Al-Cu-Fe Quasicrystalline Coating by Low Power Plasma Spraying The Comparative Analysis of Cushion or Shock Absorption Characteristic of Commonly-Used Cushion Packaging Materials Research on Deformation Properties and Boundary Effect of Composite Sandwich Structure under Deep Hydrostatic Pressure Influence of Cutting Parameters and Tool Geometric Angles on TC4 Titanium Alloy Chip Shape Application and Analysis of Plane Woven C/SiC Composites Based on Continuum Damage Mechanics Precast Concrete Pipe Pile Perfusion Control System Design

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB09374022
• ISBN:
  • 9783037853849
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 6 v.
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058