Functional materials and nanotechnology : selected, peer reviewed papers from the 2012 International Conference on Function Materials and Nanotechnology (FMN 2012), May 19-20, 2012, Zhengzhou, China

著者

• International Conference on Function Materials and Nanotechnology
• Xu, B.
• Li, H.Y.

書誌事項

Functional materials and nanotechnology : selected, peer reviewed papers from the 2012 International Conference on Function Materials and Nanotechnology (FMN 2012), May 19-20, 2012, Zhengzhou, China

edited by B. Xu and H.Y. Li

（Advanced materials research, v. 496）

Trans Tech Publications, c2012

• : pbk.

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). These are the proceedings of the International Conference on Functional Materials and Nanotechnology (FMN2012), held on the 19 and 20th May, 2012, in Zhengzhou, P.R. China. They focus on Functional Materials and Nanotechnology. The peer-reviewed papers are divided into Chapter 1: Advanced Materials Engineering and Nanotechnology; Chapter 2: Nanotechnology, Mechanics and Materials Science; Chapter 3: Materials Applications, Green Chemistry and Mining Engineering; Chapter 4: Materials, Biotechnology, Manufacturing Engineering and Environment.

目次

Preface, Committees and Sponsors Chapter 1: Advanced Material Engineering and Nanotechnology Experimental Study of the Mechanical Properties of the Composite Materials Hose Study on Preparation of Silica Aerogels Derived from Silica Sol Fractal Model for Thermal Conductivity of Wetting, Fibrous Porous Media Modification of Glucose Oxides Sensors Using Colloidal Gold Nanoparticles Application of the Nanocrystalline Alloy in Stress Measuring Effect of Urea Content on Properties and Microstructure of Ni/TiO2 Group Particles ER Fluid Study on Durability of Silicone Rubber Sealant for Pavement Joint Study in Surface Modification of Silica in Silicone Rubber Synthesis and Photoluminescent Properties of a Zinc (II) Complex with Phenanthroline Derivative Pretreatment of High Strength Ammonia Removal from Rare-Earth Wastewater by Magnesium Ammonium Phosphate (MAP) Precipitation Morphology Controlled Synthesis of ZnS(en)0.5 Nanostructures via a Novel Mixed-Solvent Solvothermal Process Structure Improvement on Dual Variable Gear Shaft of the Transmission for ZL50 Wheel Loader Electrochemical Sensing of L-Histidine Based on Structure-Switching Aptamer and Elongated Tetrahexaheral Gold Nanocrystals Simulation of Monomers Selection on Single-Molecular Copolymer Nano-Particles that Mimic Protein Folding N-Acetyl-L-Cysteine-Templated Formation of the Fluorescent Silver Nanocluster and its Application to Bioimaging Changes in Layer Properties and Physical Properties of Papers from Old Corrugated Container Fibres with PDADMAC/HEC Polyelectrolyte Multilayers TEMPO-Mediated Oxidation of Unbleached Bagasse Pulp CMAC Applied in Wind Power Prediction Based on Applied Mechanics Influence of High Temperature Annealing in Nitrogen on Upconversion Luminescence of -NaYF4: Yb3+, Er3+ Hexagonal Sub-Microplates Synthesis of Ionic Liquids [BMIM]BF4 and [BMIM]PF6 under Microwave Irradiation by One-Pot The Effects of Temperature and Heating Rate on the Preparation of Stalk Char Comparison between Microcosmic Characterizations of Propellants by SEM and AFM Simulated Annealing Algorithm Optimization of the Deterred-Coating Propellant Charge Design Research on Squirrel-Cage Induction Generator Full Power Converter Control Strategies of Wind Power Generation System with Dynamic Systems Structure and Properties of Poly(Diphenylsiloxane-Co-Dimethylsiloxane) Modified MQ Silicone Resin Artificial Aging Test Analysis of Alkyd and Polyurethane Coating System Life Cycle Cost Analysis of Anticorrosive Coating of Steel Bridge The Applied Research of Nanophase Materials in Sports Engineering Preparation and Characterization of Thermally Expandable Microcapsules by In Situ Polymerization Processing and Mechanical Properties of Starch and PCL Composite Reinforced by Nano-SiO2 Effects of Substrate, Solvent, Graft Density and Graft Length on the Formation of Cellulose-Based Ordered Porous Film Methyl Orange Degradation on TiO2 and Mixture of TiO2 and HZSM-5 in NaHCO3 Solution Porous B-TiO2 Prepared by Sol-Gel Method Using Boric Acid as Boron Source Carbon Footprint Inventory, Estimation and Analysis System in a RC Building Materials Photocatalytic Activity of B-TiO2 Prepared Using Boric Acid as Boron Source Chapter 2: Nanotechnology, Mechanics and Material Science Effects of Calcination Time on Structure and Morphology of Porous TiO2-Al2O3 Material Porous TiO2-Al2O3 Photocatalyst: The Effects of Calcination Time On the Absorbability of Lead Chrome Yellow by Using Active Floridin The Coherent Transport Properties of Electrons in a 4-Terminal Nano Device with Rashba Spin-Orbit Coupling in the Presence of Magnetic Field Biocorrosion of Biodegradable Implant Mg-xCa-4Zn Alloy in Simulated Body Fluid with the Addition of Ca Separation of Glycomacropeptide (a Functional Protein Material) by Aqueous Two-Phase Systems Analysis on Active Behavior of Wheat Straw by Py-GC-MS Analysis on Pyrolytic Behavior of Wheat Straw Multifunctional Materials by Py-GC-MS Measurement on Pyrolytic Active Materials of Wheat Straw Biomass by Py-GC-MS The Theory Calculation and Experimental Analysis of Composite Beam Research of Preparation and Ultraviolet Shielding for Nanometer Powder of Tin Dioxide Coated with Zinc Oxide Study on the Molding Process of Nano-Ceramics Rapid Evaluation of Anti-Corrosive Property of Marine Protective Coatings Preparation and Characterization of Novel Nano-ZnO/Polystyrene Resin Composite Effect on Ultrafiltration of Lactic Acid Fermentation Broth by Using Inclined Tubes Sedimentation as Pretreatment Deposition of Metal Clusters into the Functionalized Metal Organic Frameworks Analysis Xe-Lamp Selection Methods on Full Spectrum Solar Simulators Study on Effect of Gasket Stress Distribution on Bolted Flanged Connections Grinding Load Identification of an Horomill Using Inverse Pseudo Excitation Method Study on Mechanics Structural Synthesis of Six-Legged Walking Robot with Parallel Leg Mechanisms Electron Transport Properties of Rippled Zigzag Graphene Nanoribbon Effect of Nano-ZnO on Properties of Anti-Fouling Coatings Based on FEVE Coploymer Study on Preparation of Mg(OH)2 as New Flame-Resisting Materials from Dolomite through the Carbonization Preparation, Morphology and Dielectric Properties of Polyamide-6/Poly(Vinylidene Fluoride) Blends Uniform Nano/Micron-Sized ZnO Spheres with Controllable Diameter The De-Gassing Evaluation with Full Penetration for Remote Laser Welding of Zinc Coated Sheet Metal Experimental Researches on Composite Bentonite-Based Briquette Binder Study on Mechanical Properties of the Composite Materials Film by Speckle Projection Method Cr-Substituted Mesoporous Aluminophosphate Molecular Sieve: Preparation, Characterization and Catalytic Activity in the Oxidation Reaction of Ethylbenzene Widely Tunable Fiber Ring Laser with Narrow Linewidth and Fine Tuning Resolution Based on Laser Materials Synthesis, Structures, and Luminescent Properties of a Yellow-Emitting Iridium Complex Synthesis of Magnetic-Fluorescent Liposome for Cancer Imaging Addition of Nano-ZrO2 Effects on Microstructures and Properties of WC-8Co Hard Alloys Application of Magnetoelastic Effect of Ferromagnetic Material in Stress Measurement Preparation and Synthesis of Functional Silica-Nafion Composite Materials Chapter 3: Material Application, Green Chemistry, and Mining Engineering Orthogonal Experiment of Wave Absorption Property for Three-Layer Absorbing Structure Composite Material Plates Structural Analysis for an Ultra-Precision Machine Slide by FEM Based on Applied Mechanics Crack Security Influence on Refractory Design with Thermo-Mechanical Stress Experimental Study of Kinetic Parameters about Pyrolysis of Sewage Sludge Low Frictional TiO2 and MoS2/TiO2 Coatings on Ti-6Al-4V Alloy Dynamic Research of Construction Safety with Building Materials Research of Target Motion Model in Polar Coordinates Based on Dynamic Systems Experimental Study of the Real Gas Flow in Microtubes The Side Effect of Spin Precession and Quantum Interference in a Four-Terminal Nano Device with Rashba Spin-Orbit Coupling Characteristics and Outline of Water-Lubricated Thordon Bearing Analysis on High Temperature Oxidation of U71Mn Steel under CO2 Differential Gene Expression in Incompatible Interaction between Phytophthora capsici and Capsicum annuum Study on Synergy Mold Preservation to Bamboo with Extractives The Martensitic Transformation Behavior of the TiNi in TiNi/Ti2Ni Composite Synthesized in Molten Salts Numerical Analysis on the Characteristics of Settlement Deformation of the High Rock-Filled Embankment during the Construction Period The Synthesis of Cu0.81Ni0.19 Intermetallics by Mechanical Alloying Preparation and Characterisation of CaP-Containing Coating on Magnesium Alloy by Micro-Arc Oxidation and Hydrothermal Treatment Graphite Encapsulated Iron Nanoparticles Produced by Ball-Milling and Annealing a Mixture of Expanded Graphite and Iron Powders Effect of Agitation on Sorption Behavior of Expanded Graphite for Methyl Orange in Water and Crude Oil Floated on Water Anti-Friction Effect of Ball-Milled Expanded Graphite/Fe Powders Natural Chlorophyll-Sensitized Nanocrystalline TiO2 as Photoanode of a Hybrid Photoelectrochemical Biofuel Cell Rejection of Arsenopyrite in a High As-Containing Pyrite Concentrate by Inorganic Depressants Cobalt Ion Extraction from Wastewater by P204 Microemulsion Saponified Extraction of L-Theanine Using Chiral Supported Emulsion Liquid Membrane Separation of Cobalt and Nickel from Wastewater by P204 Microemulsion Saponified Studies on Oxidation of Noradrenaline Using CuPc as Catalyst Study on Predicting Rock Drillability Based on the Method of Gray Theory The Application of Atomic Absorption Spectroscopy on Detection of Engine Crankshaft Bearing Abnormal Sound The Mechanical Property of Milk Protein Fiber Study on the Relation between the Properties and the Blended Ratio of Soybean Protein Fiber/Fine-Polyester Blended Yarn The Fiber Optic Biosensor for Noradrenaline Concentration Detection Based on CuPc Catalysis Manufacture and Grinding Performance of a Polyimide Resin-Bonded cBN Wheel for Precision Grinding of Ferrous Materials Artificial Neural Network Compensation for an Optical Fiber Micro-Displacement Sensor in Positioning System Some Considerations on Processing Cassiterite-Bearing Polymetallic Sulphide Ores in China Growth Conditions of a Thermophilic Geobacillus sp. as an Enhanced Oil Recovery Material Chapter 4: Material, Biotechnology, Manufacturing Engineering and Environment The Elasticity of PLA Fiber Blended Yarn Effects of a High Magnetic Field on Abnormal Microstructure in Fe-1.1C (wt.%) Alloy Determination of Major Metals Contents in Engine Lubricating Oil Based on Atomic Absorption Spectroscopy Adsorption of Pb(II) by Silica/Yeast Composites from Aqueous Solution: Kinetic and Equilibrium Studies The Application of Carbon Fiber Composite Material for Sports Equipment An Optimal Preventive Maintenance Model for a Structure MoS2/Al2O3 Composite Coatings on A356 Alloy for Friction Reduction Tribochemical Study of Two Ashless Triazine Derivatives as Additives in Rapeseed Oil Pregnant Women Shoes Design Based on Ergonomics and Mechanics Seasonal Dynamics of Fertilizer-Derived Hydrolysable NH3 in an Arable Soil of Northeast China Enhanced Direct Electrochemistry of Glucose Oxidase and Glucose Biosensing Based on TiO2-Decorated Graphene Nanohybrids Synthesis of Novel Anionic Fluorinated Polyacrylate Emulsion and its Application in Leather Waterproofing Preparation and Application of Novel Cationic Fluorinated Polyacrylate Latex in Leather Waterproofing Preparation of Carboxylated Polysiloxane and its Application in Leather Waterproofing The Mystery of the Dark Energy Based on Energy Materials Ring Oscillator Phase Noise Properties due to PSN with Deterministic Frequency Study on the Recycling Technical Measures of Deserted Wood Furniture Materials The Study of Fractured Rock Mass Instability of the Law Based on the Hydraulic Fracturing Characteristics of a Geobacillus sp. as an Enhanced Oil Recovery Material Estimating Crack Depth of Concrete Structures Using Ultrasonic Pulse Velocity

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB09374339
• ISBN:
  • 9783037853931
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xiv, 560 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058