Advances in materials processing X : selected, peer reviewed papers from the 10th Asia-Pacific Conference on Materials Processing (APCMP2012), June 14-17, 2012, Jinan, China
Author(s)
Bibliographic Information
Advances in materials processing X : selected, peer reviewed papers from the 10th Asia-Pacific Conference on Materials Processing (APCMP2012), June 14-17, 2012, Jinan, China
（Advanced materials research, v. 500）
Trans Tech Publications, c2012
- : pbk.
Available at 1 libraries
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
This collection of selected peer-reviewed papers includes contributions from all over the world. The topics covered include new developments and applications in subtractive processes including advanced and non-traditional processes and abrasive machining, micro/nano-fabrication, material forming, and new techniques for the processing of materials and understanding the underlying principles of materials performance enhancement. This volume will be a valuable reference source for researchers in the materials processing field who wish to understand further the underlying mechanisms and this create new and practical technologies, systems and processes. It should also be particularly useful to practising engineers in materials processing who are responsible for providing efficient and effective operations.
Table of Contents
Preface, Committees and Sponsor
I. Material Subtractive Processes: Cutting and Non-Traditional Processes
Experimental Study on High-Speed Turning of Free-Cutting Steel AISI 12L14 Using Multi-Layer Coated Carbide Tools
Cutting Performance of Hard Processing Materials Based on the DEFORM-3D
Research on the Dynamic Mechanical Characteristics of the Tool Life in the Excessively Heavy-Duty Cutting Process
Stability of Turning Process with a Continuous Delay Model
Wavelet Transform Denoise of PCB Drilling Force Signal
Experimental Study of High-Speed Milling Hardened Steel 7CrSiMnMoV with Large-Ball Mill Cutter
An Experimental Research of Dry Milling Powder Metallurgy Nickel-Based Superalloy with Coated Carbide Tools
Surface Integrity in Hot Machining of AISI D2 Hardened Steel
Experimental Investigation on Surface Integrity of End Milling Nickel Based Alloy-Inconel 718
Experiment Study on Cutter Disrepair Principle and Optimization for Machining Heat-Resistant Steel
Research of Tool Parameter Design and Improvement of PCD Drill Machining CFRP
The Mechanisms of PCBN Tools in Turning GH4169
Research on Machined Surface Quality of High Speed Hard Machining for Harden Steel
Optimization of Slicing Parameters of Single Crystal Silicon Sliced by Diamond Wire Saw
Time-Domain Simulation on Plunge Milling Ti-6Al-4V
Friction in Turning Titanium Alloy Ti-6Al-1.5Cr-2.5Mo-0.5Fe-0.3Si under Minimum Quantity Lubrication (MQL) Condition
A Study of Cutting Forces in High-Speed Dry Milling of Inconel 718
Tool Wear in Ball-End Milling of Cr12MoV Die Steel Using an Indexable Cutter with the Asymmetric Inserts
Experimental Study on Wear-Resistance of Machined Surface in High Speed Milling Aviation Aluminum Alloy
Study on Milling Parameters Optimization in Remanufacturing Cold-Welding Area
Experimental Study on Intermittent Turning 2.25Cr-1Mo-0.25V Steel with Coated Cemented Carbide Tool
Influence of Inclination Angle on Machined Surface Hardness in High Speed Ball End Milling
Cryogenic Machining of Hard-To-Machine Material, AISI 52100: A Study of Chip Morphology and Comparison with Dry Machining
Finite Element and Experimental Analysis of Edge Defects Formation during Orthogonal Cutting of SiCp/Al Composites
FEA Simulation of the Influence of Cutting Parameters on Serrated Chip Formation in Machining Titanium Alloy Ti-6Al-4V
Finite Element Analysis of Surface Residual Stress of Titanium Alloy TC4 Based on High Speed Cutting
Research on Cutting-Tools Whole Life Cycle Management System
A Comparison of Dry and Wet Machining of SiC Particle-Reinforced Aluminum Metal Matrix Composites
The Design and Finite Element Analysis of the Tool in Turning the Inner Ring Groove of a Large Cylindrical Shell
The Numerical Simulation Technology in the Cutting Process of Alloy Steel AISI4340
High Speed Face Milling Cutters Dynamic Response with Deformation
Influence Characteristics of Cutting-Contact Stress on the Wear of Milling Cutter in High Speed Ball-End Milling Hardened Steel
Model of Intrinsic/Extrinsic about the Safety for High Speed Milling Tools on Mesoscale
Experimental Study on Cutting Tool Sticking Failure for Stainless Steel lCrl8Ni9Ti
Research on Sticking Failure Characteristics of Cemented Carbide Blade
Study of 1Cr18Ni9Ti Material Properties in Cutting Process
465Q Gasoline Engine Turbocharger Matching and Performance Calculation
An Experimental Study of Orthogonal Cutting of SiCp/Al Composites: Cutting Forces Analysis
A Study on the Cross-Sectional Shape of Kerf Cut with Micro Abrasive Air Jet
The Depth Model for Abrasive Waterjet Milling of Ceramic Materials
Prediction of the Cutting Depth of Abrasive Suspension Jet Using a BP Artificial Neural Network
Powder Mixed near Dry Electrical Discharge Machining
High Performance in EDM Machining of AISI D2 Hardened Steel
II. Material Subtractive Processes: Abrasive Machining
Study on Surface Roughness in Ultrasonic Vibration Mill-Grinding Hot-Pressed Silicon Nitride
The Development of an Ultrasonic Head for CMP Pad Conditioning
Study on Grinding Technology of Granite Thin Slab
Grinding Force of Ultrasonic Vibration Assisted Grinding Combined with EDM
Research on the Distribution of Grains in the Grinding Process
Application of Image Mosaic Method in the Detection of Grinding Wheel Topography
Investigation on Surface Grinding of Ti-6Al-4V Using Minimum Quantity Lubrication
Grinding Surface Creation Simulation Using Finite Element Method and Molecular Dynamics
Investigation of Material Removal Rate in Mill-Grinding SiC Particle Reinforced Aluminum Matrix Composites
Position Error Sensitivity Analysis for Polishing Robot
III. Micro/Nano-Fabrication
Ductile-Regime Machining for Fast Tool Servo Diamond Turning of Micro-Structured Surfaces on Brittle Materials
Study on Experiment Device of Abrasive Water Jet Micro-Turning
Finite Element Analysis for Ti-6Al-4V in Ultrasonic-Vibration-Assisted Micro-Cutting
Molecular Dynamics Simulation of the Ablation Process in Ultrashort Pulsed Laser Machining of Polycrystalline Diamond
Experimental Study of Cutting Forces in Micro End-Milling
Femtosecond Laser Machining of High Permeability Permalloy
The Simulation Study of Si3N4 Ceramics Nano-Cutting Process
Research on Surface Topography and Tool Wear in Micro-Turn-Milling of Micro-Screw
IV. Material Forming Processes
An Optimized Sheet Metal Forming Process Using Non-Isothermal Heating System
FEM Analysis of Extrusion of Triangular Sections from Round Billets through Curved Dies
Studies on the Cooling Effects of Water Cooling Channels in Die Casting Die in Finite Element Method
Study on Surface Roughness and Friction during Hot Rolling of Stainless Steel 301
FEM Analysis during Extrusion of Round-To-Pentagonal Sections through Converging Dies
V. Computer-Aided Techniques for Materials Processing
Influence of Different Shapes to the Dynamic Mechanical Properties of Bioprosthetic Heart Valve
Planning and Simulation Study of Stone Countertop Automatic Production Line
Study on Universal Open-Architecture CNC Development Platform Based on Clipper
Buckling Analysis of the Hydraulic Support Column Based on ANSYS
Generation of Optimal Tool-Paths for Five-Axis Finish Milling of Free-Form Surfaces
The Design and Simulation of Main Tool Carrier System in a Condition of Large Vertical Lathe
Analysis of the Movable Cotton Robot Palletizer Working Space Based on Graphing Method
Conversion Topology and Reconstruction in the Field of Robotics and Machine Tools
Multi-Objective Optimization of Product Configuration Based on Customer's Performance Satisfaction
Surgery Robot for Implantation of Intracranial Electrodes
On-Line Fault Diagnosis for Final Drive Based on Order Analysis
Matching Relationship between Shaft Material and Fatigue Properties under Complex Loading Condition
Path Optimization and Simulation of Milling in High Speed on Joint Surface of Transmission Box
Research on the Principle of Compiled-Typed NC System
Research on USB Communication in the Compiled-Typed NC System
Wireless Control System of Reconfigurable Flexible Process-Equipment
The Study of Thin-Walled Complex Parts Reverse Engineering Key Technologies
VI. Analytical and Numerical Methods for Materials Processing
Numerical Simulation on the Sintering Process of Nanocomposite Ceramic Tool Materials
Study on the Stress Intensity Factors of Double Cracks Normal to and Dwelling on the Interface in the Cladding Material Structure
Three Dimensional Monte Carlo Simulation of Microstructure Evolution in Presence of Pores and Impurities for Three-Phase Nanocomposite Ceramic Tool Materials
Simulation of Fabrication for Al2O3 Ceramic Tool Materials
Fluid Characteristics of Material Flow in High Speed Metal Cutting Process
Research on Solid Modeling and a Different Mode of Loading with Finite Element Analysis for Flat End Mill
Experiments and Finite Element Simulations on Micro-Milling of Aluminium Alloy 7050-T7451
Research on the Tools' Strength in the Condition of Uncommonly Dynamic Heavy-Duty Loads
FEM on Constitutive Equation of High Strength Stress Steel GCr15
Multi-Scale Fe Modeling Inconel718 Machining Process and Crack Initiation of Brittle Particle
Failure Analysis of a Bellows Expansion Joint of Inconel625 Alloy
Stability Analysis of Fractional Delay Differential Equations by Chebyshev Polynomial
Stability Analysis of Fractional Delay Differential Equations by Lagrange Polynomial
Review of Deep Brain Stimulation Micro-Electrodes
Design of Hybrid Composite Multilayer Rim of High Speed Energy Storage Flywheels
The Analysis and Evaluation Method of Assembly Accuracy Reliability of Heavy Duty Machine Tool
VII. Materials Performance Enhancement and Properties
Effect of SiO2 Particle Concentration on the Tribological Properties of PTFE Sealing Material
The Effects of MgO Content on the Mechanical Properties and Microstructures of Al2O3-TiN-TiC Ceramic Materials
Influence of Hot Pressing Sintering Temperature and Time on Microstructure and Mechanical Properties of TiB2/Al2O3 Tool Materials
Toughening Mechanisms and Wear Behavior of a TiC Whisker Toughening Alumina Ceramic Cutting Tool Composite
The Effects of Sintering Process on Microstructure and Mechanical Properties of TiB2-Ti(C0.5N0.5)-WC Composite Tool Materials
Effect of Nd Addition on Microstructure of Mg-Zn-Nd Master Alloys
Improved Tensile Strength of Carbon Nanotube Reinforced Aluminum Composites Processed by Powder Metallurgy
Influence of Cobalt Additive on Mechanical Properties and Residual Stress of Al2O3-TiC Ceramic Cutting Tool Material
Bio-Inspired Organic-Inorganic Composite Coatings for Implants via a Micro-Dispensing Technique
Microstructure and Mechanical Properties of Ti(C,N)-TiB2-WC Composite Ceramic Tool Materials
Study on the In Situ Fabricated Titanium Nitride-Based Ceramic Cutting Tool Materials Reinforced by Titanium Diboride
The Process Performance Test Study of Pure Chitin Fiber Spunlace Nonwoven
Influence of Different Deformation on Microstructure and Properties of 304 Austenitic Stainless Steel
Nano-Indentation Simulation Study Based on Parallel Computing
The Simulation Research of Nano-Indentation Based on the Molecular Dynamics
VIII. Advances in Design and Measurement
A Virtual Crankshaft Dynamic Balance Measuring System Based on VB
Accuracy Analysis of Stewart Parallel Manipulator Based on Uniform Experiment Design
Research of Turbine Pump Shaft Effective Pre-Tightening Force Transmission Influencing Factors
Calculation of Compressor Characteristics Based on Elman Neural Network
Sub-Pixel Based Alignment of SMT Electronic Components
by "Nielsen BookData"