Advances in materials processing X : selected, peer reviewed papers from the 10th Asia-Pacific Conference on Materials Processing (APCMP2012), June 14-17, 2012, Jinan, China

著者

• Asia-Pacific Conference on Materials Processing
• Huang, Chuanzhen

書誌事項

Advances in materials processing X : selected, peer reviewed papers from the 10th Asia-Pacific Conference on Materials Processing (APCMP2012), June 14-17, 2012, Jinan, China

edited by Chuanzhen Huang ... [et al.]

（Advanced materials research, v. 500）

Trans Tech Publications, c2012

• : pbk.

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

This collection of selected peer-reviewed papers includes contributions from all over the world. The topics covered include new developments and applications in subtractive processes including advanced and non-traditional processes and abrasive machining, micro/nano-fabrication, material forming, and new techniques for the processing of materials and understanding the underlying principles of materials performance enhancement. This volume will be a valuable reference source for researchers in the materials processing field who wish to understand further the underlying mechanisms and this create new and practical technologies, systems and processes. It should also be particularly useful to practising engineers in materials processing who are responsible for providing efficient and effective operations.

目次

Preface, Committees and Sponsor I. Material Subtractive Processes: Cutting and Non-Traditional Processes Experimental Study on High-Speed Turning of Free-Cutting Steel AISI 12L14 Using Multi-Layer Coated Carbide Tools Cutting Performance of Hard Processing Materials Based on the DEFORM-3D Research on the Dynamic Mechanical Characteristics of the Tool Life in the Excessively Heavy-Duty Cutting Process Stability of Turning Process with a Continuous Delay Model Wavelet Transform Denoise of PCB Drilling Force Signal Experimental Study of High-Speed Milling Hardened Steel 7CrSiMnMoV with Large-Ball Mill Cutter An Experimental Research of Dry Milling Powder Metallurgy Nickel-Based Superalloy with Coated Carbide Tools Surface Integrity in Hot Machining of AISI D2 Hardened Steel Experimental Investigation on Surface Integrity of End Milling Nickel Based Alloy-Inconel 718 Experiment Study on Cutter Disrepair Principle and Optimization for Machining Heat-Resistant Steel Research of Tool Parameter Design and Improvement of PCD Drill Machining CFRP The Mechanisms of PCBN Tools in Turning GH4169 Research on Machined Surface Quality of High Speed Hard Machining for Harden Steel Optimization of Slicing Parameters of Single Crystal Silicon Sliced by Diamond Wire Saw Time-Domain Simulation on Plunge Milling Ti-6Al-4V Friction in Turning Titanium Alloy Ti-6Al-1.5Cr-2.5Mo-0.5Fe-0.3Si under Minimum Quantity Lubrication (MQL) Condition A Study of Cutting Forces in High-Speed Dry Milling of Inconel 718 Tool Wear in Ball-End Milling of Cr12MoV Die Steel Using an Indexable Cutter with the Asymmetric Inserts Experimental Study on Wear-Resistance of Machined Surface in High Speed Milling Aviation Aluminum Alloy Study on Milling Parameters Optimization in Remanufacturing Cold-Welding Area Experimental Study on Intermittent Turning 2.25Cr-1Mo-0.25V Steel with Coated Cemented Carbide Tool Influence of Inclination Angle on Machined Surface Hardness in High Speed Ball End Milling Cryogenic Machining of Hard-To-Machine Material, AISI 52100: A Study of Chip Morphology and Comparison with Dry Machining Finite Element and Experimental Analysis of Edge Defects Formation during Orthogonal Cutting of SiCp/Al Composites FEA Simulation of the Influence of Cutting Parameters on Serrated Chip Formation in Machining Titanium Alloy Ti-6Al-4V Finite Element Analysis of Surface Residual Stress of Titanium Alloy TC4 Based on High Speed Cutting Research on Cutting-Tools Whole Life Cycle Management System A Comparison of Dry and Wet Machining of SiC Particle-Reinforced Aluminum Metal Matrix Composites The Design and Finite Element Analysis of the Tool in Turning the Inner Ring Groove of a Large Cylindrical Shell The Numerical Simulation Technology in the Cutting Process of Alloy Steel AISI4340 High Speed Face Milling Cutters Dynamic Response with Deformation Influence Characteristics of Cutting-Contact Stress on the Wear of Milling Cutter in High Speed Ball-End Milling Hardened Steel Model of Intrinsic/Extrinsic about the Safety for High Speed Milling Tools on Mesoscale Experimental Study on Cutting Tool Sticking Failure for Stainless Steel lCrl8Ni9Ti Research on Sticking Failure Characteristics of Cemented Carbide Blade Study of 1Cr18Ni9Ti Material Properties in Cutting Process 465Q Gasoline Engine Turbocharger Matching and Performance Calculation An Experimental Study of Orthogonal Cutting of SiCp/Al Composites: Cutting Forces Analysis A Study on the Cross-Sectional Shape of Kerf Cut with Micro Abrasive Air Jet The Depth Model for Abrasive Waterjet Milling of Ceramic Materials Prediction of the Cutting Depth of Abrasive Suspension Jet Using a BP Artificial Neural Network Powder Mixed near Dry Electrical Discharge Machining High Performance in EDM Machining of AISI D2 Hardened Steel II. Material Subtractive Processes: Abrasive Machining Study on Surface Roughness in Ultrasonic Vibration Mill-Grinding Hot-Pressed Silicon Nitride The Development of an Ultrasonic Head for CMP Pad Conditioning Study on Grinding Technology of Granite Thin Slab Grinding Force of Ultrasonic Vibration Assisted Grinding Combined with EDM Research on the Distribution of Grains in the Grinding Process Application of Image Mosaic Method in the Detection of Grinding Wheel Topography Investigation on Surface Grinding of Ti-6Al-4V Using Minimum Quantity Lubrication Grinding Surface Creation Simulation Using Finite Element Method and Molecular Dynamics Investigation of Material Removal Rate in Mill-Grinding SiC Particle Reinforced Aluminum Matrix Composites Position Error Sensitivity Analysis for Polishing Robot III. Micro/Nano-Fabrication Ductile-Regime Machining for Fast Tool Servo Diamond Turning of Micro-Structured Surfaces on Brittle Materials Study on Experiment Device of Abrasive Water Jet Micro-Turning Finite Element Analysis for Ti-6Al-4V in Ultrasonic-Vibration-Assisted Micro-Cutting Molecular Dynamics Simulation of the Ablation Process in Ultrashort Pulsed Laser Machining of Polycrystalline Diamond Experimental Study of Cutting Forces in Micro End-Milling Femtosecond Laser Machining of High Permeability Permalloy The Simulation Study of Si3N4 Ceramics Nano-Cutting Process Research on Surface Topography and Tool Wear in Micro-Turn-Milling of Micro-Screw IV. Material Forming Processes An Optimized Sheet Metal Forming Process Using Non-Isothermal Heating System FEM Analysis of Extrusion of Triangular Sections from Round Billets through Curved Dies Studies on the Cooling Effects of Water Cooling Channels in Die Casting Die in Finite Element Method Study on Surface Roughness and Friction during Hot Rolling of Stainless Steel 301 FEM Analysis during Extrusion of Round-To-Pentagonal Sections through Converging Dies V. Computer-Aided Techniques for Materials Processing Influence of Different Shapes to the Dynamic Mechanical Properties of Bioprosthetic Heart Valve Planning and Simulation Study of Stone Countertop Automatic Production Line Study on Universal Open-Architecture CNC Development Platform Based on Clipper Buckling Analysis of the Hydraulic Support Column Based on ANSYS Generation of Optimal Tool-Paths for Five-Axis Finish Milling of Free-Form Surfaces The Design and Simulation of Main Tool Carrier System in a Condition of Large Vertical Lathe Analysis of the Movable Cotton Robot Palletizer Working Space Based on Graphing Method Conversion Topology and Reconstruction in the Field of Robotics and Machine Tools Multi-Objective Optimization of Product Configuration Based on Customer's Performance Satisfaction Surgery Robot for Implantation of Intracranial Electrodes On-Line Fault Diagnosis for Final Drive Based on Order Analysis Matching Relationship between Shaft Material and Fatigue Properties under Complex Loading Condition Path Optimization and Simulation of Milling in High Speed on Joint Surface of Transmission Box Research on the Principle of Compiled-Typed NC System Research on USB Communication in the Compiled-Typed NC System Wireless Control System of Reconfigurable Flexible Process-Equipment The Study of Thin-Walled Complex Parts Reverse Engineering Key Technologies VI. Analytical and Numerical Methods for Materials Processing Numerical Simulation on the Sintering Process of Nanocomposite Ceramic Tool Materials Study on the Stress Intensity Factors of Double Cracks Normal to and Dwelling on the Interface in the Cladding Material Structure Three Dimensional Monte Carlo Simulation of Microstructure Evolution in Presence of Pores and Impurities for Three-Phase Nanocomposite Ceramic Tool Materials Simulation of Fabrication for Al2O3 Ceramic Tool Materials Fluid Characteristics of Material Flow in High Speed Metal Cutting Process Research on Solid Modeling and a Different Mode of Loading with Finite Element Analysis for Flat End Mill Experiments and Finite Element Simulations on Micro-Milling of Aluminium Alloy 7050-T7451 Research on the Tools' Strength in the Condition of Uncommonly Dynamic Heavy-Duty Loads FEM on Constitutive Equation of High Strength Stress Steel GCr15 Multi-Scale Fe Modeling Inconel718 Machining Process and Crack Initiation of Brittle Particle Failure Analysis of a Bellows Expansion Joint of Inconel625 Alloy Stability Analysis of Fractional Delay Differential Equations by Chebyshev Polynomial Stability Analysis of Fractional Delay Differential Equations by Lagrange Polynomial Review of Deep Brain Stimulation Micro-Electrodes Design of Hybrid Composite Multilayer Rim of High Speed Energy Storage Flywheels The Analysis and Evaluation Method of Assembly Accuracy Reliability of Heavy Duty Machine Tool VII. Materials Performance Enhancement and Properties Effect of SiO2 Particle Concentration on the Tribological Properties of PTFE Sealing Material The Effects of MgO Content on the Mechanical Properties and Microstructures of Al2O3-TiN-TiC Ceramic Materials Influence of Hot Pressing Sintering Temperature and Time on Microstructure and Mechanical Properties of TiB2/Al2O3 Tool Materials Toughening Mechanisms and Wear Behavior of a TiC Whisker Toughening Alumina Ceramic Cutting Tool Composite The Effects of Sintering Process on Microstructure and Mechanical Properties of TiB2-Ti(C0.5N0.5)-WC Composite Tool Materials Effect of Nd Addition on Microstructure of Mg-Zn-Nd Master Alloys Improved Tensile Strength of Carbon Nanotube Reinforced Aluminum Composites Processed by Powder Metallurgy Influence of Cobalt Additive on Mechanical Properties and Residual Stress of Al2O3-TiC Ceramic Cutting Tool Material Bio-Inspired Organic-Inorganic Composite Coatings for Implants via a Micro-Dispensing Technique Microstructure and Mechanical Properties of Ti(C,N)-TiB2-WC Composite Ceramic Tool Materials Study on the In Situ Fabricated Titanium Nitride-Based Ceramic Cutting Tool Materials Reinforced by Titanium Diboride The Process Performance Test Study of Pure Chitin Fiber Spunlace Nonwoven Influence of Different Deformation on Microstructure and Properties of 304 Austenitic Stainless Steel Nano-Indentation Simulation Study Based on Parallel Computing The Simulation Research of Nano-Indentation Based on the Molecular Dynamics VIII. Advances in Design and Measurement A Virtual Crankshaft Dynamic Balance Measuring System Based on VB Accuracy Analysis of Stewart Parallel Manipulator Based on Uniform Experiment Design Research of Turbine Pump Shaft Effective Pre-Tightening Force Transmission Influencing Factors Calculation of Compressor Characteristics Based on Elman Neural Network Sub-Pixel Based Alignment of SMT Electronic Components

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB09377541
• ISBN:
  • 9783037853993
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xvi, 746 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058