Progress in new materials and mechanics research : selected, peer reviewed papers from the 2012 International Conference on Computer-Aided Material and Engineering 2012 (ICCME 2012), March 17-18, 2012, Hangzhou, China
Author(s)
Bibliographic Information
Progress in new materials and mechanics research : selected, peer reviewed papers from the 2012 International Conference on Computer-Aided Material and Engineering 2012 (ICCME 2012), March 17-18, 2012, Hangzhou, China
（Advanced materials research, v. 502）
Trans Tech Publications, c2012
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 2012 International Conference on Computer-Aided Material and Engineering (ICCME 2012) was held on the 17 and 18th March, 2012, in Hangzhou, China. The papers are divided into: Chapter 1: Mechanics Applications; Chapter 2: Materials - Study, Modeling and Technologies; Chapter 3: Material Engineering; Chapter 4: Applied Mechanics and Mechanical Engineering.
Table of Contents
Preface, Committees, Sponsors
Chapter 1: Mechanics Applications
Preliminary Research on the Measurement of Oxide Layer of ELID Based on the Laser Sensor and the Eddy Current Sensor
Long-Term Protection Effects of Electrochemical Chloride Removal on Reinforced Concretes
Research on the Failure Mechanism of Pitting Corrosion of the 304 Stainless Steel in Chloride Ions Environment
Interfacial Fracture Strength of Viscoelastic Inclusions in a Polymer Blend
Conductivity of PANI-PVA Composite Conductive Coatings with the Doping of Different Acid
Chapter 2: Materials - Study, Modeling and Technologies
Properties of Polyaniline with the Doping of Different Acid
Experimental Study on Galling Behavior of Advanced High Strength Steel in Sheet Metal Forming
Numerical Simulation of the Influence of Temperature and Pressure in CVI of C/C Composite
The Studies on Numerical Simulation of Unidirectional Solidification Process in 23t Steel Ingot
Dislocations in Gan Grown on Silicon
Study on the Influence of Manufacturing Defects on Coefficient of Thermal Expansion of Plain Weave C/SiC
Study on Friction Reduction and Wear Resistance Process and Composition of FeS Solid Lubrication Duplex Layer
Fabricate Mould Insert with Conformal Cooling Channel Using Selective Laser Melting
Fabrication and Characterization of Transparent Conducting ZnO: Al Films for Organic Optoelectronic Devices
Properties of Indium Tin Oxide Films Prepared by RF Magnetron Sputtering at Different Substrate Temperatures
Study on Dielectric Relaxation in BiFeO3/Bi3.25La0.75Ti3O12 Film
Researched on Dielectric Properties of Alumina Substrate Material
Study on Temperature Sensibility of Nano-Copper/Paraffin Materials
Study on Floatability and Separation of High Ash and Difficult Floatable Coal
Effect of Filler Loading and Temperature on Electrical Resistivity of Stainless Steel Fiber/PA6 Conductive Polymer Composites
Study on the Optical and Electrical Properties of Organic Semiconductor Thin Films for OLEDs
Influence of Substrate Temperature on the Characteristics of Zinc Oxide Thin Films Deposited by Magnetron Sputtering
Luminescence Properties of Electron Trapping Material CaB4O7:Sm3+
The Research on the Relationship between Cauchy Integral Theorem and Complex Function Integral in Mechanics of Materials
Cauchy Integral Formula on the Integration Path C on Singularity in Mechanics of Materials
Luminescence Properties of Novel Red Phosphor NaSrPO4:Eu3+
Upconversion Luminescent Properties of YVO4:Tm3+, Ho3+, Yb3+
Downconversion for Solar Cells in Sr3Gd(PO4)3:Tb, Yb Phosphors
Luminescence Properties of Ce3+ and Tb3+ Doped Strontium Pyroborate Phosphors
First Principles Study of the Electronic Structure of In1-xGaxN
Simulation Analysis on the Deep Drawing Property of Brake Chamber Shell
A Formation Mechanism of X Level due to an Indium-Carbon Dimer in Silicon
Study on Selvage Parameter Based on Silk Fabric Specifications Database
Mixed-Solvothermal Preparation of Mace-Like CdS Nanocrystals
Influence of Structure Unit and the Distribution on the Low-Velocity Impact Property of the 3D Woven Composites
Effects of Feed Water Conditions on Performance of Electrodeionization Process for Removal of Ni2+ from Dilute Solution
Study on In Situ Carbon Dioxide-Generation Flooding
The Mathematical Model of the Relation among the Resistance, the Distortion Temperature and the Rate of the Steel in the Plastic Deformation
Seismic Behavior of Concrete Filled Circular Steel Tubular Columns Based on Artificial Neural Network
Bearing Capacity of Concrete Filled Square Steel Tubular Columns Based on Neural Network
Synthesis and Properties of an New Amphoteric Retaning Agent
Synthesis and Properties of Green Copolymer Retannage of Starch and Acrylamide with HRP/H2O2/ACAC
Study on Dispersion Properties of an Amphoteric Polycarboxylate Superplasticizer on Cement Pastes
Experimental Study of Thermal Conductivity of Carbon Fiber Reinforced Cement-Based Composites
Numerical Simulation of the Effects of Scanning Velocity on the Process of Laser Transformation Hardening on the Inner Wall of Pump Barrel
Synthesis of Acrylic High-Oil Absorption Resins
Surface Treatment of PPTA Fiber and Properties of its Composite Materials
Study on the Preparation of Flame-Retardant Polyacrylonitrile Fiber by Surface Modification
Effect of Hot-Band Annealing on the Microstructure of Non-Oriented Electrical Steel Containing Copper
Evolution of Recrystallization Texture in Non-Oriented Electrical Steel Containing Copper
Chapter 3: Material Engineering
An Experiment on the Surface Stability of a Liquid Bridge
NIR-Based Wood Water Content Prediction with an Integration of ANN and PCA
Fabrication and Ultraviolet Detection Properties of Zinc Oxide by Oxidizing Metallic Zinc at High Temperature
Fundamental Research on Development of Liquid Crystalline Micro-Actuator
The Effect of Gamma Ray on the Mechanical and Molecular Structure Changes of Silk Fibroin
Research on Measurement Thickness and Growth Behaviors of Oxide Layers in Pre-Dressing Process of ELID
Study on Modification of Raw Bamboo Fabric and Dyeing Properties
Structure and Properties of Copolymer Tannage of Vanillin and Gallic Acid with HRP Initiation
Study on the Shading Property of the Fabric
Influence of Structure Parameters on Moisture Permeability of Fabric Woven by Fine PP Fiber with Star Section
Mechanical Property and Conductivity of Polyaniline-Poly(Vinyl Alcohol)Composite Films
Capacity Measuring Devices and Applications of Carbon Dioxide Absorption by Ammonia Water
Improvement on Dyeing Performance of Different Bifunctional Reactive Dyes for Soybean Protein Fibers
The Red-Emitting Phosphor of Sm3+-Doped Y2Si4N6C
Mixture Calculation of Chromium Ore Smelting Reduction Process in a Converter
Effects of Sodium Citrate on MAO Process and Characteristics of Coatings Fabricated on AZ91D Magnesium Alloy
Lost Foam Casting Coating in Production of Cylinder Block
The Influence Faction to the Crude Oil Emulsion Stability
Filling Characteristics of Magnesium Alloy Molten Metal in Squeeze Casting
Effect of Surface Roughness on Nanocontact: Quasicontinuum Simulation
Chapter 4: Applied Mechanics and Mechanical Engineering
Numerical Simulation of Water-Lubricated Rubber/Chromium Coating Pair Test
Study of Torsion Spring's Parameters with Angular Type Grippers
Feasibility Analysis on Application of Nonstandard Casing in PuGuang Gas Field
Optimum of Drawbead Design and Restraining Forces by Sensitivity Analysis Method Combined with Inverse Approach in Sheet Metal Forming Process
A Study on the Application of Design Thinking Strategy to Form Generation System
The Dynamic Dual Vector Finite Element Method for Electromagnetic Waveguide Problem
Numerical Simulation for Temperature Variability of the Stable Transported Hot Oil Pipeline
The Rolling Forming Principle and the Deformation Analysis of the Ring Multi-Mandrel Roller
Research on the Fatigue Strength Test of 20CrMnMo Carburized and Quenched Gears
Differential Evolution Algorithm with Hybrid Discrete Variables and its Application to Mechanical Optimization
The Optimal Design of Vertical Hammer Mill Based on Pro/E
Study on Friction Heat and Force about Friction Forming Hole
Spin Injection in a Ferromagnetic/Organic System
Research on NC Relieving of Annular Worm Gear Hob
Optimal Design of the Dynamic Gear Flowmeter
Finite Element Analysis of Deformation and Flow of Two-Way Cartridge Valve under Different Pressures
The Stability of Premixed Flame on Water-Cooled Copper Slot
Study on Vibration Absorption of New-Energy Autos Batteries' Cooling Fan
The Influence of Projectile Structure on the Trajectory Stability of Oblique Penetration Concrete
Parameter Study of Concrete Impact Damage Model Based on DOE Analysis
The Experimental Research on the Effect of Age on Bond Behavior between Deformed Bar and Shale Ceramic Concrete
Optimization of Balloon-Stent System Based on Nonlinear Material Using Kriging Surrogate Model
Research on Reliability Evaluation Method of Casing in High Level Acid Gas Field
Influence of Material Thickness to the Dynamic Mechanical Properties of Bioprosthetic Heart Valve
by "Nielsen BookData"
