Solid state science and technology XXVI : selected, peer reviewed papers from the 26th Regional Conference on Solid State Science and Technology, November 22-24, 2011, Seremban, Negeri Sembilan, Malaysia
Author(s)
Bibliographic Information
Solid state science and technology XXVI : selected, peer reviewed papers from the 26th Regional Conference on Solid State Science and Technology, November 22-24, 2011, Seremban, Negeri Sembilan, Malaysia
（Advanced materials research, v. 501）
Trans Tech Publications, c2012
- : pbk.
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The major topics covered here are: (i) biomaterials, polymers and composites (ii) ceramics, dielectrics, glasses and optical materials, (iii) metals and alloys, (iv) nanoscience and nanotechnology, (v) semiconductors, thin films and devices, (vi) superconductors and magnetic materials and (vii) theory, simulation, modeling and related areas. This work will be invaluable to researchers and scientists in the area of advanced materials and nanotechnology as it covers the latest developments in materials preparation, characterization, theory and applications.
Table of Contents
Preface and Organizing Committees
Chapter 1: Biomaterials, Polymer and Composite
Effect of Methyl Methacrylate Content in Carbon Black Filled Natural Rubber Compounds
Synergism between Flame Retardant and Phosphonium Salt Modified Layered Silicate on Properties of Rigid Polyurethane Foam Nanocomposite
Effect of Compression Pressure on the Physical and Electrochemical Properties of Activated Carbon Monoliths Electrodes for Supercapacitor Application
Studies of Poly(Ethyl Methacrylate) Complexed with Ammonium Trifluoromethanesulfonate
Microwave Absorbing Properties of Nickel-Zinc Ferrite/Multiwalled Nanotube Thermoplastic Natural Rubber Composites
Ionic Conductivity of PVDF-HFP/MG49 Based Solid Polymer Electrolyte
Effect of Paper Sludge Ash on the Compressive Strength of Plaster of Paris/Paper Sludge Ash Composites
Effect of Salt Concentration and Humidity on the Ionic Conductivity of Poly(Vinylidene Fluoride-Hexafluoropropylene) (PVdF-HFP)
Effect of Propylene Carbonate on Ionic Conductivity of MG49-TiO2-LiClO4 Composites Polymer Electrolytes
Chapter 2: Ceramic, Dielectric, Glass and Optical Material
Structural Study of Antimony Borate Glass System Doped with Transition Metal Ions Using Infrared and Raman Spectroscopy
Synthesis, Characterization and Charge-Discharge Profile of LiMn0.3Co0.3Ni0.3Fe0.1O2 Prepared via Sol-Gel Method
A Model for Enhanced Up-Conversion Luminescence in Erbium-Doped Tellurite Glass Containing Silver Nanoparticles
Effect of Temperature on BCP Ceramics Coating on 316L Stainless Steel Using Electrophoretic Technique
Structural and Luminescence Properties of Borate Glass with Lithium and Strontium Modifier Doped with Transition Metal Ions
Effect of Annealing Temperatures on Formation of Na0.5Bi0.5TiO3 and (Na0.5Bi0.5)0.96Ba0.04TiO3 Ceramics Prepared via Sol Gel Method
Chemical Durability of Yb Doped Lead Tellurite Glass: Effect of Solution pH
Structural and Electrical Transport Properties of La0.67Ba0.33Mn1-yTiyO3 Ceramics
Phase Analysis in the Crystallization of Cordierite
Optical Absorption of Er3+/Nd3+ Co-Doped Tellurite Glass
Synthesis and Characterization of Electrical Properties of Bismuth Titanate
Structural Study of Lithium Strontium Borophosphate Crystal Using X-Ray Diffraction and Infrared Spectroscopy
Luminescence Properties of Magnesium Phosphate Glass Doped Samarium
Study of Crystallization Kinetics of TeO2-Na2O-MgO Glass Using Ozawa Method: Influence of Europium
Luminescence Spectra of TeO2-PbO-Li2O Doped Nd2O3 Glass
Significant Influences of Selenium on the Electrical Properties of Bi2Te3 Compounds Synthesized Using Solid-State Microwave Irradiation
Effect of Sintering Time on the Purity and Morphology of LiTaO3
Mn Substitution with Co in LiCo(1-X)MnxO2 Cathode Materials and their Charge-Discharge Characteristic
Enhanced Infrared to Visible Upconversion Emission in Er3+ Doped Phosphate Glass Containing Silver Nanoparticles
Chapter 3: Metal and Alloy
Friction Stir Welding of 6061-T6 Aluminum Alloy
Wetting and Intermetallic Study between Sn-3.5Ag-1.0Cu-xZn Lead-Free Solders and Copper Substrate (x = 0, 0.1, 0.4, 0.7)
Microstructure and Phases of As-Cast and Heat-Treated Al-Si-Mg/AlN Composites Prepared by Stir Casting
Characterization of Sn-3.5Ag-1.0Cu Lead-Free Solder Prepared via Powder Metallurgy Method
High Temperature Corrosion of Fe-30Cr in Flowing CO2 Gas
Electrophoretic Deposition of Biphasic Calcium Phosphate (BCP) Coatings on 316L Stainless Steel at Room Temperature
Chapter 4: Nanoscience and Nanotechnology
Photoluminescence and Raman Studies of Annealed ZnO Nanostructures
Effects of Annealing Treatment on Photoluminescence and Structural Properties of ZnO Nanostructures
Interdependencies of Critical Radius, Critical Energy and Surface Energy (CRESE) in Silicon Self-Assembled Nanodots
Mechanical Properties of TPNR-MWNTs-OMMT Hybrid Nanocomposites
Effect of Eosin-Y Coating Temperature on the Performance of Inverted Bulk Heterojunction Organic Solar Cells
Effect of Water Content on Structural and Photoelectrochemical Properties of Titania Nanotube Synthesized in Fluoride Ethylene Glycol Electrolyte
Photoluminescence Studies of Silicon Self-Assembled Quantum Dots
ZnO Nanorod Arrays Coated with Eosin-Y at Different Concentrations for Inverted Bulk Heterojunction Organic Solar Cells
Chapter 5: Semiconductor, Thin Film and Device
Effect of Rapid Thermal Annealing Time on the Structural and Optical Properties of Layered Structured SiOx/Au/SiOx Film
Current-Voltage Characteristics of n-Al0.08In0.08Ga0.84N Schottky Diode Using Pt Metal Contact
Effect of Ethylenediamine Tetraacetic Acid in Electrochemical Deposition of Zinc Selenide
Effect of Annealing temperature on the Structural and Magnetic Properties of TbxY3-xFe5O12(x = 0.0, 1.0, 2.0) Thin Films Prepared by Sol-Gel Process
Synthesis and Characterization of Carboxymethyl -Carrageenan for Dye-Sensitized Solar Cells Application
Cuprous Oxide Thin Films for a Photoelectrochemical Cell of ITO/Cu2O/PVC-LiClO4/Graphite
PEDOT:PSS Thin Film as Transparent Electrode in ITO-Free Organic Solar Cell
Structural and Electrical Properties of Pb1-xYbxSeyTe1-y Quaternary Compound Synthesized by Solid State Microwave Assisted Plasma
Effect of Electric Field Treatment on the Performance of Organic Salt Doped Solar Cell
Surface Morphology of Metal Oxide SnO2 under Different Concentrations of Oxygen by Thermal Evaporation Method
Raman and Photoluminescence Spectroscopy of Nanocrystalline Diamond Films Grown by Hot Filament CVD
Gan Nanowire Growth by Thermal Evaporation Method
Effect of in Concentration on the Optical Lattice Vibrations in Quaternary AlxInyGa1-x-yN Alloys
Chapter 6: Superconductor and Magnetic Material
Influence of Na, Mg and Yb Substitution for Ca in Bi(Pb)-2223 Superconductor
Superconducting Properties of Calcium Substitution in Barium Site of Porous YBa2Cu3O7 Ceramics
Effect of Ca Substitution at Y-Site of YB2C3O7 Superconductor Prepared via Co-Precipitation Method
Elastic Properties of MgB2 and SiC-Doped MgB2 Superconductors
Effects of Fe3O4 Nano Particles Addition in High Temperature Superconductor YBa2Cu3O7-
Effect of (La0.67Ca0.33MnO3)x (x = 0.0 - 0.6) Addition in YBa2Cu3O7- System on the Structure and Transport Properties
Thermal Diffusivity and Conductivity of La0.7Ca0.3-xSrxMnO3 (x=0 to 0.10)
Influence of Milling Time on the Crystallization, Morphology and Magnetic Properties of Polycrystalline Yttrium Iron Garnet
Effect of Sm-Doping on Magnetic and Dielectric Properties of BiFeO3
Chapter 7: Theory, Simulation, Modeling and Related Area
Strain Modification of Band Edge Energies in a Pyramidal InAs-GaAs Quantum Dot System
Effect of Pressure on Structural, Electronic and Elastic Properties of Cubic (Pm3m) SnTiO3 Using First Principle Calculation
Calculation of Electronic Properties of InAs/GaAs Cubic, Spherical and Pyramidal Quantum Dots with Finite Difference Method
First Principle Study of Dynamical Properties of a New Perovskite Material Based on GeTiO3
DFT Applications in Characterizing Electronic Properties of Cadmium Telluride with Relativistic Effects
by "Nielsen BookData"
