Automatic manufacturing systems II : selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012) July 6-8, 2012, Zhuhai, China
著者
書誌事項
Automatic manufacturing systems II : selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012) July 6-8, 2012, Zhuhai, China
（Advanced materials research, v. 542-543）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This work on the topic of automatic manufacturing systems consists of 302 peer-reviewed papers. The papers are grouped into ten chapters: Virtual Manufacturing and Sustainable Manufacturing; Digital Manufacture and Quality Monitoring; Systems Analysis and Industrial Engineering; Supply Chain and E-Commerce Systems; Computer-Aided Manufacturing Engineering; Mechatronics; Transmission and Control of Fluid; Mechanical Control and Information Processing Technology; Micro-Electronic Packaging Technology and Equipment; Computer Application Technology.
目次
Preface and Organizing Committees
Chapter 1: Virtual Manufacturing and Sustainable Manufacturing
Method of Product Innovation Acquisition Based on Dynamic Response Particle Swarm Optimization
The Background Reconstruction Algorithm of Dynamic Updating
Chapter 2: Digital Manufacture and Quality Monitoring
An Overview of Grid-Connected Photovoltaic Power Generating System
The Review of Grid-Connected Photovoltaic Power System and its Nonlinear Behavior
The Research on Long-Term Monitoring and Controlling Effect of Scientific and Technological Innovation for Liaoning Equipment Manufacturing Industry
Vibration Influence Analysis of the Reliability Test for an Undercarriagedoor Lock System
Study on Deformation Mechanism of Deep Soft Rock Roadway in Daqiang Coal Mine of Tiefa Coal Industry
The GLR Chart for Poisson Process with Individual Observations
Technology of Grid-Connected Wind Power Generation
Modal Analysis and Experiment on 2.0 MW Wind Turbine Gearbox
A Gas Detection System Based on the Micro Light Splitting Principle
Pulsating Flow Induced Vibration in a Rotor-Seal System
Application of Double-Used Absorption Heat Pump in Power Plants
Research on Heterogeneous Data Integration of Coal Mine Three-Dimensional Visualization Ventilation System
Selective Assembly for Components with Multiple Characteristics
A Method Research to Obtain Quickly the Vibration Transmissibility of Cushioning Packaging Materials
Research of Ultrasonic Image Evaluation Based on Defect Dimension
The Monitoring of CNC Machine Processing Condition Based on the BP Neural Network
Study of DQ Rotating Frame Control for Single-Phase Photovoltaic Grid-Connected System
Study on Guaranteed Measures of Construction Quality about Water-Proof and Screed-Coat of Roof
Equivalent Analysis of Elastic Constants and Stability Calculation of Corrugated-Arch Metal Roof
The Review of Chaos Research in Power System
Application of Contourlet in Research of Rough Surface Topography
Study and Analyse Hydraulic System of a Boat by Using Risk Analysis Method
Advanced Process Control Using Partial Least Squares
Aided Design of Precision Seeder Based on Case Based Reasoning
Real-Time Strain Monitoring and Control of Urban Bridge Cluster Monitoring System with FBG Sensor
Design and Implementation of a Remote Healthcare System Based on Wearable Body Sensor Network
Research on Temperature Control System with a Scaling Factor for Iron Ore Reduction Measuration
Multi-Mode Switching Control of Networked Control System Based on Hidden Semi-Markov Model
Study on Application of PLC and Inverter in Blown Film Extrusion Production Line Control System
Multifunctional Entire the Design Protecting the Water Supply Control Device
Application of Virtual Instrument on Condition Monitoring and Fault Diagnosis System of the Rotating Machinery
Traffic Signal Lamp Control System Design Based on S7-200
A Adaptive Wireless Sensor Networks for Marine Monitoring
Development of Air Flow Control System for Large-Scale Pre-Oxidation Furnace
On a Strengthened Hardy-Littlewood-Polya Inequality
Existence of Extremal Solutions for Impulsive Delay Fuzzy Differential Equations in n-Dimensional Fuzzy Vector Space
Design of Trash Rack Water Level Measurement and Control System Based on Ultrasonic
An Approach Based on Power Generalized Aggregation Operator to Decision Making
The Control Strategy of the Rotor-Side PWM Converter Based on Doubly-Fed Induction Generator
Measurement and Control System for Traction Motor Based on OPC Technology
Design of Granary Temperature Monitoring System Based on Virtual Instrument Technology
The Fuzzy-PID Algorithm Apply to the Constant Gas Flow Control of the Dust Sampler
Sensitivity Function Based Active Disturbance Rejection Control for the Plant with Unknown Order and Uncertain Relative Degree
Using Spectrum Correction to Diagnose Mechanical Fault
Gearbox Fault Diagnosis Based on EMD and Coefficient-Energy Value
Gearbox Fault Diagnosis Based on Empirical Mode Decomposition and Hilbert Transform
Chapter 3: System Analysis and Industrial Engineering
Research on the Algorithm of Post-Processing with Space Tool Compensation Vector in Five-Axis CNC Machine
Description Logics in Information Semantic Integration for Product Design and Manufacturing
Resource Conflict Resolution Strategy in Collaborative Design Environment
The Exploration of Recycling of Industrial Products Based on Modularization
The Status of the Mold and Green Manufacturing in China
The Recycling of Plastics from ELVs - Background, Practices and Potentials
Evaluation Model of Product Manufacturability for Rapid Response Design
Research of Engineering Change Analysis
The Impact Analysis of University R&D on High-Tech Industry Development Based on PLS Method
An Effective Dynamic Evolutionary Algorithm for Engineering Problems
Implementation of the Lean Model for Carrying out Value Stream Mapping and SMED in the Aerospace Engine Case Production
Disclosure of Internal Control Based on XBRL
Research on Manufacturing Execution System
Based on Industrial Engineering Production System Analysis and Improvement Research
Performance Analysis of in-Out System of Railway Container Terminal Based on Fuzzy Queuing Model
Survey of Development and Technology of Smart Grid
Application of Electronic Display Systems for Visual Management in SMEs
A Study of Knowledge Transfer on Flexible Manufacturing Capability and Manufacturing Performance
The Facilities Plan and Project Management Based on the Optimize Correlation of Logistics and Production Construction
RFID Technology in Garment Production Line Management Application
Optimization Retrieval for Manufacturing Resources Based on Interval Number
Application of HAZOP Method in the Design of Shallow Water Catheter Frame Platform
Two-Stage Supply Chain Inventory Coordination Strategy with Supply-Hub Operation Mode
Manufacturer Technology of Dense Chinese Fir Laminated Veneer Lumber (LVL)
Approach for Flow Shop Scheduling Based on Petri Net
Innovating the Mode of Engineer Training and Promoting the Training Program of Excellent Engineers
A Cutter Production Management System Based on the Hybrid Architecture of C/S and B/S
The Research of Automation Management Based on Configuration Technology
VaR-Based Job Shop Scheduling Model and Algorithm
Production Efficiency Promotion Model of Multi-Product and Small-Batch Machinery Manufacturing Enterprises
Intelligent Inspection System on Information Equipment in Smart Grids Based on IOT
Assembly Process Modeling Based on Hierarchical Tree
Study of Assessment Model of Packaging via AHP Method
Approach for Multi-Objective Flexible Job Shop Scheduling
The Quality Prediction in Small-Batch Producing Process Based on Weighted Least Squares Support Vector Regression
A 16Kb SRAM with Programmable Replica Bitlines for Dynamic Voltage Scaling Systems
Dynamic Investment Risk Assessment Model for Intelligent Control Firms
Study on Planning and Design of Production Facility for Bearing Manufacturing Industry Based on SLP
Chapter 4: Supply Chain and E-Commerce System
M&A: A Management Method of Supply Chain
Study for Inventory of Supply Chain on the Basis of Newsboy Model
Research on the Data Integration Technology Based on RFID of Supply Chain
The Technology Structure Study on E-Commerce and Logistics System Integration of Household Appliance Manufacturers
Research on Layering Model in the Service-Oriented Network Management Architecture
Optimization of E-Commerce Logistics Process of Automobile Manufacturing Enterprise Based on ARIS
Research on the Framework of High Performance the Internet of Things Based on Multilevel Disaster Recovery
The E-Commerce System and its Evaluation of Manufacturing
The Design and Implementation of Web Service Based on Axis2
Chapter 5: Computer Aided Manufacturing Engineering
Use PLC to Optimize Electrical Control System of Gear Processing Machine
Research on Network Manufacturing Resources Optimization Deployment
A Direct Approach for Loop Subdivision Surface Offset Approximation
An Overview of STL Model Offset
Calling Method of Process Sheet in Interactive Round-Hole Broach CAPP System
An Online Prediction Model for BFG Output in Steel Industry
Discussion on Equipment Acquisition System Modeling
Finite Element Analysis of Deformation of the Multipoint Flexible Clamped Thin-Wall Component during Machining
The Research of Machining Process Design Based on Manufacturing Resources in MBD Mode
Application of Proteus Simulation for the Stepper Motor Control in Experimental Teaching
Achieve of Torpedo Shell Parameter Model Based on Secondary Development of UG
Computing Offsets of NURBS Curve and Surface
Adaptive Sampling Strategy for Free-Form Surface Based on CAD Model
Chapter 6: Mechatronics
Design of High Dimensional Nonseparable Compactly Supported Wavelets with Special Dilation Matrix
Method for Feed-Rate Optimization Based on S Curve Acceleration and Deceleration Control of Piecewise Tool Path
Application of Full-Digital Servo Valve in Auto-Discharge Control System for the Jig
Application of Straightness Error Based on Virtual Instrument in Experiment Teaching
Application of Single Neuron Adaptive PID Control in Electro-Hydraulic Position Servo System
The Applied Research of Four Polynomial Acceleration and Deceleration Control Method in Multi-Axis DSP Motion Controller
Space Arc Trajectory Planning Based on PCI Motion Control System
The Residual Life of Shipboard Cable Forecasting Based on PSO and GM(1, 1)
Multi-Signal Generator Design
Improvement of Wind Speed Measurement Model by Meteorological UAV and System Design
The Designation of Programmable Direct-Current Voltage-Stabilized Source Based on Micro Controller Unit
CSDA a Routing Protocol Based on Secure Data Fusion for Wireless Sensor Network
Development of a GUI Application for the Safety Performance Test of Outdoor Fitness Equipment Using C#
Monitoring System Design of High-Speed Carton Packaging Machine Based on PCC and Servo Control
The Segmentation Method Based on Fusion Algorithm of Transition Region Extraction for Coronary Angiograms
Preparation and Properties of Sensing Membrane for Fiber Optic DNA Sensor
Research of Ballistic Missile early Warning System
Research on Nozzle Array Structure Fluidic Gyroscope Zero Temperature Compensation
Precision Comparison of 3D Measurement System Based on Stereo Vision
A Method of Detecting Circle by Improved Hough Transform
An Improved Clustering Algorithm Based on Coverage Area for Wireless Sensor Networks
Development and Application of CISDI Online Slab Quality Diagnosis & Analysis System
Crosstalk between Nb Superconducting Coplanar Waveguide Resonators
Study on Infrared Thermal Wave Inspection Technology Using Linear Frequency Modulated (LFM) Light Excitation
Dynamic Analysis on the H-Type Stage Using Largrange Method
Research on High Precision Testing System for Roller Gear Cam Indexing Driven
Stress Amplification Sensing Effect of Holes on Cross-Fiber Composite Simplified from Chafer Cuticle
Dynamic Performance Experiment and Fuzzy PID Control Method Study on MRF Engine Mount
Implementation of LabVIEW Based Embedded Control System for FAIMS on a Single Chip ARM
Global Calibration Method for a Multi-Sensor Measurement System Based on Structured Light Stereo Vision
A Study on the Recognition of Low-Resolution Motion Visual Image
Error Analysis of a Novel Resolver-to-Digital Converter
A Clock Soft Synchronization Method Based on CAN Bus and Synchronization Error Analysis
Airborne Precision Image Stabilizing Method Based on Dual-Mode Stabilization Mechanism
ISP Technology's Application in Remote Upgrade for the Intelligent Instruments
The Design of High-Speed Synchronization Data Collection Node Machine for Multi-Chip CCD Measurement
Resistance Measurement Design of the Battery Based on LabVIEW
Study on Nozzle Array Structure Fluidic Gyroscope
Study on Improving Resolution of Fluidic Gyroscope
Uncertainty Analysis and Simulation of Coordinate Measuring Definition
Review of Acupoints Positioning and Tracking Technology for Chinese Massage Robot
Training Multi-Layer Perceptrons with the Unscented Kalman Particle Filter
Research on the Vessels' Routeing System and Ship Reporting System off Cheng Shanjiao
Chapter 6: Mechatronics
Study on the Speed Control System of Hydraulic Pump-Motor Based on PID Neural Network
A Study of the Effect of Absorbing Materials in the UHF Sensor
An Offset Reduction Technique for Latch Type Sense Amplifier in High Performance and High Density SRAM
Research on Safety Monitoring System of Mine Hoist Based on VB
Person Following of a Mobile Robot Using Kinect through Features Detection Based on SURF
Development of Vehicle Airbag Ignition Algorithm Based on Power-Rate Method
Motion Control of Welding Robot Based on ADAMS and ACR-9000
A High Resolution Vernier Ring Oscillator with Ultra-Low Temperature Drift
Weighted Multi-Sensor Data Fusion Based on Fuzzy Kalman Filter for Seam Tracking of the Welding Robots
Research on Nozzle Array Structure Fluidic Gyroscope Sensitivity-Temperature Compensation
The Movement Interference Research of Connecting Rod Manipulator Based on Virtual Assembly Technology
Review on Key Technologies of Infrared Thermal Wave Detection Technology in Parts Defects
Based on the LabVIEW Frequency Modulation Continuous Wave Radar Signal Acquisition and Processing
Analysis and Control on Winch Rope-Aligning Motion of Well Testing Truck
Research on Calibration Method of Tire Dynamic Balance Detection System
Research of Feature Extraction in Mongolian Speech Based on an Improved Algorithm of MFCC Parameter
Design and Analyze Device QCM-DEP Chip Seprarating Nano Particles
Research on Nozzle Array Structure Fluidic Gyroscope Signal Compensation Circuit
Design of Embedded and Miniaturized Multilayer LTCC Hairpin Bandpass Filters
Study of Edge Detection of Printed Circuit Board Photoelectric Image Based on Multi-Scale Wavelet Transform
Research on Vector Control of PMSM Based on Three-Level NPC Inverter-Fed
Design of Automatic Test Software for Electromagnetic Radiation Safety Margin
Design of Embedded MRFD Controller
QoS Routing Algorithm Based on Multi-Parameter Constraints for Wireless Sensor Networks
Controllability Analysis of Flexible Variable Sweep Control Wing
Research on Nozzle Array Structure Fluidic Gyroscope Signal Extraction Circuit
Differential Translational Gripper with Double-Claw of Manipulator Driven by Combined Cylinder
Analysis of Workspace for the 4-PUU Parallel Manipulator
Research Progress of Materials and Fabrication Technologies of Microfluidic Chip
A Simplified Model of Inertial Navigation System for Underground Pipeline Track Instrument
High-Sensitivity Refractive Index Sensor Based on Simply Fabricated Single Mode Fiber Tapers
The Detection and Control of Tape Deviation in Winding Process
Design of the Automatic Sorting and Palletizing Manipulator for Passenger Car Tire after Be Tested
Control System Design of the Automatic Sorting and Palletizing Manipulator for Passenger Car Tire
Automobile Controller Development Based on dSPACE
Research on Fluidic Gyroscope Signal Processing Circuit
Design and Application of Time-Domain Transmission Moisture Content of Crude Oil Sensor
Detection Research on Weak Stress Wave in Rock-Soil Based on Quasi Distributed Optical Fiber Sensing Technology
Pedestrian Detection Based on Histograms of Oriented Gradients in ROI
Fault Detection System and Reliability Analysis for Chain-Type Tool Magazine
Study of Silicon Substrate Microspheres Reactive Ion Etching Technique
Design of Servo System Intelligent Control Chip Based on FPGA
Research on the Electronic Tunneling in Asymmetric Dual-Quantum-Well
Determination of DMMP Using a Polymer Coated QCM Sensor
Study on Track Control to the Multiple Degrees of Freedom Mechanical Arm of the Sampling Machine for Coal at Railway Carriage
Design of an Authentication System Based on Face Recognition and the Second Generation ID Detection
Logical Structure Analysis of Intelligent Measurement and Control System Basic on Personification Theory
The Optimization of Wire Bonding Parameters and Quality Prediction Model Based on Neural Network
Improvement of Two-Stage Camera Calibration
Optimal Design of a 6-DOF Motion Simulator Based on Formulating Dynamic Index
The Device Design of Driving Cars Astern Based on the Wireless Sensor Networks Node
Research on Nozzle Array Structure Fluidic Gyroscope Sensitive Principle
A Novel Single-Ended Flyback High Frequency Regulated LED Driver Power Supply
A Circuit for Robustness Enhancement of the Subthreshold SRAM Bitcell in 65nm Technology
Control System Modeling for Automotive Brake Test-Bench Based on Improved PID Algorithm
A New Multi-Focus Image Fusion Algorithm Based on Contrast Ratio and Discrete Wavelet Frame Transform
A New Iterative Method with Sixth-Order Convergence for Solving Nonlinear Equations
Driver Study of Touch Screen Based on S3C2440 and Embedded Linux
A Novel Design of the Device for Measuring Draw and Plug Forces
Lightning Flash and Lightning Performance of Transmission Lines
Development and Design of LonWorks Intelligent Nodes
Generating the New Chaotic Attractors of the Lorenz System Family via Anti-Controlling Method
Study Surveys on Image Segmentation of Plant Disease Spot
Chapter 7: Transmission and Control of Fluid
Numerical Study on the Flow Structure of a Steam-Jet Vacuum Pump at Different Throat Length
Storehouse Seepage Analysis during the Construction and Operation Period
A Study on Three-Dimensional Seepage of Dam on the Deep Pervious Fracture Rock Foundation
Study on the Improvement of Measurement Range of Fluidic Gyroscope
Numerical Modeling of Fluid Flow in RH Vacuum Refining Process
Frost Growth Simulation in Cryogenic Vertical Pipe Flow
The Numerical Simulation of Flow Characteristics in T-Type Pipe
Study on Drilling Fluid Technology of Eliminating Bit Balling by Changing Wettability
Solid-Liquid Coupling Mechanism Research in Seepage Field and Stress Field of Fractured Rock Mass
Simulation Analysis for Hydraulic Clamping Force of Bidirectional Hydraulic Lock' Valve Spool Based on Fluent
Influence of the Outlet Aperture of Sensitive Chamber on the Stability of Fluidic Gyroscope
Design of the Dry-Mixed Mortar Truck in Avoiding Segregation
Research on Pressure Drop Transfer Standard Based on CFD
Initial Seepage Field FM Analysis
Numerical Study of Fluid Mixing in a Microchannel with a Circular Chamber on a Rotating Disk
Study on the Pendulum Characteristic of Nature Convection in Dimensional Enclosure
Establishment of Valve Control Mathematical Model of Hydraulic Differential Cylinder
Research on Optimization of Tundish Flow Distrbution
Chapter 8: Mechanical Control and Information Processing Technology
Fuzzy Fractal Interpolation Surface and its Applications
A Comparison between Vector Control and Direct Torque Control for the Marine PMSM
AUV Rolling Motion Control in Inland Rivers Based on Sliding Mode Control Improved by Artificial Immunity Algorithm
Chapter 9: Micro-Electronic Packaging Technology and Equipment
CNC Machine Model of Epicycloid Bevel Gear and Cutting Experiment Based on Formate Method
Development and Application of Open CNC System Based on DMC Motion Controller
A Line and Arc Transition Tool Radius Compensation Algorithm for Convex Contour
Research of Embedded Open Soft-CNC System Based on Omponent
The Working Methods of the Servo Cam Grinder and its Accuracy Compensation Strategy
A Brief Analysis of NC Machine Tools Networking
Development of STEP-NC Based Manufacturability Evaluation System
Approach to Machining Setup Process Planning of NC Machine Tools Based on Graph Theory
Design and Application of NC Machining Template under NX/CAM Environment
Log-Linear Process Modeling of Reliability Assessment for Numerical Control Machine Tools
Research and Simulation of an Efficient Circular Interpolation Algorithm
New Numerical Control System for Machining Based on Dual MCU
Adaptive NURBS Interpolation with S-Shape ACC/DEC Control
Reliability Assessment Test Design for Numerical Control Machine Tools
Smart Charge/Discharge Management System of a Portable Computer with Dual Batteries
Compensation Strategy Research in Dynamic Voltage Restore
Single-Phase Double-Stage PV Grid-Connected System Based on Multi-Carrier PWM
Research on Identification of Narrow Bandwidth
Calculation of Single Conductor Capacitance by Estimating the Electrostatic Field
Chapter 10: Computer Application Technology
The Effect of Crossover and Mutation Operators on Genetic Algorithm for Job Shop Scheduling Problem
Automobile Braking Simulation Applied Research Based on ADAMS
Virtual Manufacturing Technology and its Application in Furniture Manufacturing Enterprises
The Digital Protection of Minority Architectural Culture Heritage
Enterprise Asset Management Platform under Cloud Computing Mode
ASTVA: DDoS-Limiting Architecture for Next Generation Internet
Design of WebGIS Application Based on Ajax
Component Based WebGIS Development Framework
An Improved Orphan Nodes-Reduced Mechanism in ZigBee Network
The Network Management Data Model's Design and Implementation in Communication Field
Rice Edges Detection Based on Canny Operator
Pulmonary Nodules Detection in CT Scanned Images Based on Optimization Region Growing and MCSVMs
Wireless Communication Technique Applied to Coal-Transport System
Segmentation Algorithm of Traffic Prohibited Area Based on Wavelet
Study on the Reconstruction of Three-Dimensional Bed Model and Visualization
Chinese Connected Word Speech Recognition Based on Derivative Dynamic Time Warping
Design and Development of Web-Learning Platform Based on Multimedia Technology
Urban Water Consumption Forecasting Based on Projection Pursuit
The Design of Fingerprint Identification System Based on TMS320VC5402
Two-Dimensional Orthogonal Unsupervised Discriminant Projection
Using a Multilayer Perceptrons Neural Network and Genetic Algorithm to Predict the NTD/USD Exchange Rate
Domain Decomposition Method for the Variational Inequality of the Second Kind
Analysis Artistic and Performance Applications of Oracle
DOA Estimation of Surface Vessel under Correlated Noises Using Vector Hydrophone Array
Wind-Wave Numerical Prediction Model in East China Sea
Infinite Matrix Transformation of a Class of Operator
Supervised Clustering Algorithm for University Student Learning Algebra
Summary on Research of Agent and Multi-Agent System
Based on the Visual Modflow Surge Water Numerical Simulation Study
Research on Queue Scheduling Algorithm Modeling and Analysis
Application of Neural Network Based on Genetic Algorithm to Predict Hypotension Events during Spinal Anesthesia
Neural Network Algorithm for Solving Large Scale Travelling Salesman Problems
Some Extensions of Hilbert-Type Inequalities
Research and Development of Automatically Generating and Editing Software for Ventilation Network Drawings
The Teaching Application of Systemview in Error-Controlling
A Density Functional Theory Study of Gd8O12 Cluster
Research on Automatic Generation Technology of Structural Net and Speed Diagram
The Implement of a Flooding Information System
Research and Application on the Visualization Algorithm of Wheel-Rail Contact
Rendering and Comparing Research of 3D Julia Sets Based on CPU/GPU
Multiclass Kernel Function Evaluation
Neural Network Computing Based Text Mining and its Application
The Research of Dynamic Encryption Algorithm
Dynamic Encryption Algorithm Based on Ergodic Matrix
Clustering Methods Evaluation as Well as its Application to Highway Traffic Research
Ontology-Driven Requirements Elicitation Based on Scenario
Random Censored Data MLE of Weibull Distribution Based on Simulink
Heterogeneous Strategy and its Application in an Improved Micro-Genetic Algorithm
「Nielsen BookData」 より
