Advancement of materials and nanotechnology II : selected, peer reviewed papers from the International Conference on the Advancement of Materials and Nanotechnology (ICAMN II 2010), November 29-December 1, 2010, Kuala Lumpur, Malaysia
Author(s)
Bibliographic Information
Advancement of materials and nanotechnology II : selected, peer reviewed papers from the International Conference on the Advancement of Materials and Nanotechnology (ICAMN II 2010), November 29-December 1, 2010, Kuala Lumpur, Malaysia
（Advanced materials research, v. 545）
Trans Tech Publications, c2012
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
"The 2nd International Conference on the Advancement of Materials and Nanotechnology (ICAMN II)"--Pref.
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The objective of this special collection is to provide a platform for the presentation of the latest progress achieved by materials scientists in divers fields: such as the latest techniques in materials synthesis, characterization and fabrication - plus the functionalities of materials and devices. The papers are grouped into: Nanomaterials and Nanostructures; Electrochemical Materials; Biology, Medical and Pharmaceutical Materials and Technology; Metals and Alloys; Electrical and Electronic Materials; Polymeric Materials and Composites; Devices (Including MEMS and NEMS); Catalytic Materials; Semiconducting and Superconducting Materials; Other Materials.
Table of Contents
- Preface, Committees and Sponsors Chapter 1: Plenary Lectures Single Crystal X-Ray Structural Determination: A Powerful Technique for Natural Products Research and Drug Discovery TEM and SEM Analysis for Formation Mechanism of Tin Whiskers Functional Films of Polymer-Nanocomposites by Electrospinning for Advanced Electronics, Clean Energy Conversion, and Storage Nanostructured A2(RE,B)O6 (A = Ba, Sr
- RE = Rare-Earth
- B = Sb, Zr) Perovskite Ceramics and their Potential Applications in Microwave and Superconducting Electronics Optical Properties of Si Quantum Dot Potential under Pressure Effect Pulsed LASER Deposition of MgO Thin Films Quasicrystal Surfaces: Structure, Adsorption and Epitaxy Combustion Synthesis of Ni/Al Base Composites Chapter 2: Nanomaterials and Nanostructures Nano Natural Dyes from Melastoma Malabathricum L. Synthesis and Characterization of ZnO, CuO and CuO/ZnO Nanostructures by a Novel Sol-Gel Route under Ultrasonic Conditions Growth of ZnO Nanostructures at Different Reactant Concentrations for Inverted Organic Solar Cell Study of Iodine Influence in Synthesizing ZnO Nanoparticles via Precipitation of Zn - Ethanol Reaction The Governance of Sintering Regimes on the Properties and Ageing Resistance of Y-TZP Ceramic Fabrication and Structural and Optical Characterizations of GaN Nano and Micro Structures Grown by Thermal Evaporation Method The Effects of Temperature of Hydrothermal Growth of Titanium Dioxide Nanomaterial Deposition of Nano Fiber ZnO and Zn1-xCdxO Thin Films by a Simple Spray Pyrolysis and Characterizations for Optoelectronic Applications Development of Gold Nanoparticle Radiotracers for Investigating Multiphase System in Process Industries The Effect of Long Term Loading on Epoxy-Based Adhesive Reinforced with Nano-Particles for In Situ Timber Bonding Structural Characterisation of Cellulose and Nanocellulose Extracted from Mengkuang Leaves Investigation of Wear Properties of Al-4.5wt.%Cu Nano-Composite Reinforced with Different Weight Percent of TiC Nano Particles Produced by Mechanical Alloying Synthesis and Characterization of -Alumina-Supported Cobalt and Iron Nanocatalysts Sol-Gel Synthesis of Highly Stable Nano Sized MgO from Magnesium Oxalate Dihydrate Conductivities of Titanium Dioxide Obtained via the Sol-Gel Method Characterization of LiMn0.3Co0.3Ni0.3Cr0.1O2 and LiMn0.333Co0.333Ni0.333O2 Synthesized via Sol-Gel Method: XRD, SEM and XPS Studies Effect of Synthesis Method on the Nanostructures of Magnesium Oxide (MgO) and their Band Gap Energies Band Gap Energies of Magnesium Oxide Nanomaterials Synthesized by the Sol-Gel Method Effect of Detergent on the ZnO Nanorods Structures Synthesized via the Sol-Gel Method The Effect of Annealing Temperature on the Band Gap of ZnO Nano Materials Synthesis and Characterization of Al2O3 by Using a Combustion Synthesis Method Chapter 3: Electrochemical Materials Mesoporous Tin Phosphate as Anode Material for Lithium-Ion Cells Materials Characterization and Charge-Discharge Profile of LiNi1-XCoxO2 Cathodic Materials for Li-Ion Battery Application Synthesis and Battery Studies of Sodium Cobalt Oxides, NaCoO2 Cathodes Characterisation of Lithium Aluminium Titanium Phosphate as Solid Electrolytes Synthesized by Mechanical Milling Method Synthesis and Electrochemical Behaviour of Lithium Manganese Vanadates Synthesis and Electrochemical Behaviour of LiMn(2-x)ZnxO4 Cathode Materials Mn as a Substituted Cation in LiCoO2 Cathode Materials Investigation of the Overlithiation of Layered LiNi0.7Co0.2Fe0.1O2 Material Influence of Carbon Additives on Cathode Materials, LiCoO2 and LiMn2O4 Chapter 4: Biology, Medical and Pharmaceutical Materials and Technology Titanium Dioxide (TiO2) Films by Anodic Oxidation in Phosphoric Acid Effects of Ramp Rates with Short Holding Time on the Sinterability of Hydroxyapatite Physicochemical Properties of Hydroxyapatite Extracted from Fish Scales Reverse Micelle Liquid-Liquid Extraction of a Pharmaceutical Product Chapter 5: Metal and Alloys Structural, Physical and Mechanical Properties of Mg-Al Alloys Processed under CO2 Atmosphere Effect of Alloying Elements on the Microstructure and IMC Formation of SnAgCu Solder on Ni (P) Substrate Chapter 6: Electrical and Electronic Materials Ionic Transport in PMMA-NaCF3SO3 Gel Polymer Electrolyte Investigation of Ionic Conduction and Morphological Properties of PMMA-Based Polymer Electrolytes Containing Lithium Iodide Electrical and Magnetic Studies of (La0.5-xPrxBa0.5)(Mn0.5Ti0.5)O3 as Multiferroic Material Impedance Spectroscopy Study of LiTaO3 Powder Synthesized via Sol-Gel Method Structural and Electrical Properties of Lanthanide Substituted-Bismuth Titanate Prepared by Low-Temperature Combustion Synthesis Structural and Electrical Characterization of Doped Zirconia Nanostructured Fibres Reactive Sputtering Growth and Characterizations of InN Thin Films on Si Substrates A Study of the Structural and Electrical Characteristics of Thermally Oxidized Al-Doped Zn3N2 Film on Glass Chapter 7: Polymeric Materials and Composites Studies of ENR-50 and LiN(SO2CF3)2 Electrolyte System Studies of MEH-PPV and MEH-PPV/MCMB Films and their Light Absorption in the Red Wavelength Region of the Visible Spectrum Ionic Conductivity of PVC-NH4I-EC Proton Conducting Polymer Electrolytes Effect of Anion Size on the Conductivity Behaviour of Hexanoyl Chitosan-Based Polymer Electrolytes Influence of Frequency and Temperature on the Dielectric Properties of Ni0.4Zn0.6Fe2O4-Polypropylene Composites Physical Performance of Bamboo Strips-Oil Palm Trunk Veneers Composite Lumber at Different Layer Orientations and Hot Pressing Times Effect of Compatibilizer on Impact Strength and Morphology of Polystyrene/Zinc Oxide Nanocomposites Spinning and Characterization of Silica/Polypropylene Nanocomposite Fibers Water Absorption and Modification of Kenaf and Flax Fibres Preparation and Characterizations of Cassava Starch Nanocomposite Reinforced Kenaf Chapter 8: Devices (Including MEMS and NEMS) Free Carrier Absorption Loss of Optical Phase Modulator Bio-Inspired Advanced Materials for Reducing Friction & Wear in MEMS Devices Chapter 9: Catalytic Materials Esterification Reaction Using Ionic Liquids (ILs) as Homogeneous Catalyst Selective Synthesis of Glycerol Monoester with Heteropoly Acid as a New Catalyst Bimetallic Basic Catalyst Comprising Niobium and Cesium Supported on MCM-48 for the Claisen-Schmidt Condensation Chapter 10: Semiconducting and Superconducting Materials Effect of Nanosize MgO Addition on the Texture and Mechanical Strength of Bi-2212 Superconductor Compound Optical and Electrical Properties of Indium Tin Oxide (ITO) Thin Films Prepared by Thermal Evaporation Method on Polyethylene Terephthalate (PET) Substrate Chapter 11: Other Materials Production of Layered Hydrotalcite Using Tapai as Fuel Fabrication of Dye Sensitized Solar Cell Based on TiO2 Nanoparticles and Chlorophyll from Pandan Leaf as Active Layer Synthesis and Characterization of Fe2O3 Prepared Via Sol-Gel Method
by "Nielsen BookData"