Advanced materials and process technology : selected, peer reviewed papers from the 2nd International Conference on Advanced Design and Manufacturing Engineering (ADME 2012), August 16-18, 2012, Taiyuan, China

著者

• International Conference on Advanced Design and Manufacturing Engineering
• Liu, Xianghua

書誌事項

Advanced materials and process technology : selected, peer reviewed papers from the 2nd International Conference on Advanced Design and Manufacturing Engineering (ADME 2012), August 16-18, 2012, Taiyuan, China

edited by Xianghua Liu ... [et al.]

（Applied mechanics and materials, v. 217-219）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The studies presented in this book cover the topics of: composites, micro/nano-materials and equipment, alloy materials, steel, polymer materials, optical/electronic/magnetic materials, energy materials and new energy technology, environmentally-friendly materials and waste utilization, biomaterials and preparation technology, thin films, structural materials and earthquake-resistant structures, functional materials, surface-engineering/coatings, modeling, analysis and simulation, materials processing technology, laser-processing technology, mechanical behavior and fracture, tooling testing and evaluation of materials, thermal engineering theory and applications, detection and control technology.

目次

Preface and Conference Organization Chapter 1: Composites Aluminium Titanate-Aluminia Composites Synthesized by Heterogeneous Precipitation Method Electrochemical Behavior of Copper in the (NaCl-KCl-CuCl2) Molten Salt Corrosion Resistance of E-Glass Fiber in Simulated Oilfield Environment A Study of Spectral Changes of Reactive Dyes Piezoelectric Properties of 1-3 Piezoelectric Tubular Composites Effects of B2O3 Flux on the Synthesis and Microstructure of Aluminum Metal Matrix Composites The Melting Temperature of CaO-(2CaO*SiO2)-B2O3-SiO2-(Al2O3) Slag System Calculation Model of Mass Action Concentrations for CaO-Al2O3-SiO2 Slag System Study on Sintering Properties and Crystallization of Fused Quartz Ceramic Materials Containing BN-B4C Effect of Electromagnetic Stirring on Morphology Evolution of Mg2Si in Hypereutectic Al-Si Alloy Composite Numerical Simulations of SFRC Projectile Penetrating into Limestone Using FEM/SPH Coupling Method Research on the Optimization of Porosity in Resin Mineral Composite Preparation and Properties of Closed Cell Aluminum-Fly Ash Floating Beads Composite Foam Application of Advanced Carbon Fiber Composite Material in Sport Equipments Tensile Behavior of 2.5D C/SiCN Composites Microstructure Evolution of In Situ Synthesized VC Reinforced Iron Matrix Composites Study on Antistatic PET/PTT-CNTs Composites Modeling of the Tensile Deformation Behavior of SiCp/Fe Composites Low-Temperature Preparation of Porous Cordierite-Mullite Ceramics Using Rice Husk as Silica Source and Pore-Forming Agent Reliability Based Buckling Analysis of Composite Panels with Tophat Stiffened Topology Doping of Diamond Crystals with a Dopant of P3N5 The Effects of the Aging Temperature on the Microstructure and Corrosion Resistance of the Nickel-Phosphorus Composite Al2O3 Deposit Influence of Phosphorous on the Tribological Properties of PM Iron-Based Sintered Composites Effect of Pouring Temperature on the Microstructure of HCCI/Steel Composite Hammer Microstructure of In Situ Particles/7055Al Matrix Composites with Deep Cryogenic Treatment Effect of CaO/SiO2 Ratio and TiO2 on Glass-Ceramics Made from Steel Slag and Fly Ash Experimental Studies of Glass Reinforced Aluminum (GLARE) Bolted Joint Conductive Rubber Nanocomposites as Tensile and Pressure Sensors Effect of Coupling Agent Treatment on the Properties of Silicon Carbide Filled LLDPE Composites High Strain-Rate Compressive Response of Epoxy Composites Preparation of Nickel/Poly(m-Toluidine) Composites and its Magnetic Properties Tribological Characteristics of Si3N4-HBN Ceramic Materials for Dry Application Evaluation of Drag Reduction Agent Used in Oil Pipeline Transportation Study of Wettability of Vinyl Resin on Carbon Fiber Concrete Crack Control Technology in Chongqing Inch Container Terminal Box Letter of Application in Engineering Study on Physical and Dynamic Properties of BR Based Composites Filled with Different Particle Size of Magnesia Thermodynamic Parameters Analysis of MgS Superfine Inclusion in Grain Boundary Optimization Design for Laminated Composite Structure Based on Kriging Model Study on the Performance of Pearl Fiber Composite Yarn Steel-Concrete Bond Deterioration under Repeated Loading for Different Confinement Levels Test and Analysis on Anti-Penetration Performance of Ceramic Multi-Layer Composite Medium Chapter 2: Micro/Nano Materials and Equipments Study on Dynamics Performance of Nano-Concrete Effect of Doping Transition Metal Ions on Photocatalysis of TiO2 Nanowires Mechanism of Nanofibre Fabrication by Meltblowing Synthesis and Luminescent Properties of Micro - Nanometer Ca0.69Sr0.23(PxMoy)O4:0.05Eu3+ by Co Precipitation - Melted-Salt Method Experimental Study on Ultrasonic Grinding of Nano-ZrO2 Ceramics by Single-Grit Tribological Characteristics of Nano Structured Nickel Coatings for Renivating of Extruding Shafts In-Plane Thermoelectric Generator of Carbon Nanotube Membrane Driven by Thermal Gas Flow Solid State Chemical Reaction Synthesis and Characterization of Nanocrystalline Cerium Oxalate under Ultrasonication Spectra Application of Tetragonal Nano-Zirconia in Ceramic Teeth Effect of Starting Powders on Microstructure and Properties of Silicon Nitride Nanoceramics Production of Nano NiO Particle with Chemical Precipitation Method and their Characteristics Study of Modification Mechanism of Ultrafine Silica Modified by PAMAM Size-Controlled Synthesis of Magnetite Nanoparticles from Iron Acetate by Thermal Decomposition Preparation and Characterization Nano-Cellulose and its Surface Modification by Silane Coupling Agent Polyethersulfone Composites Reinforced by Silica Nanoparticles Preparation and Application Study of Nano-Sized Organic Bentonite Used for Composite Flame Retardant Improvement Effect of Functionalized Cnts on Mechanical and Thermal Properties of Epoxy Matrix Chapter 3: Metal Alloy Materials Effects of Deformation Ratio above Recrystallizaton Temperature on Microstructure and Properties of 2A12 Aluminum Alloy Effects of Pre-Ageing on Thermomechanical Treatment Process of 2A12 Aluminum Alloy Influence of Stiffener Structural Parameters on Compress Buckling Performance of Alloy Aluminum Stiffened Panel Age-Hardening Characteristics of Cu-Ni-Si Alloy after Cold Deformation The Application of Abaqus Software in the Online-Quenching Process of 6005 Aluminum Alloy Profile Study on Structure Stability of Ti-Al Multilaminate Material at High Temperature Study on Tribological Performances of Friction Plate on MW Wind Power Properties of Low-Carbon Al2O3-C Refractories with Different Critical Particle Size Research on the Tribology Performance of Copper-Bismuth Bearing Material Effect of Electromagnetic Stirring Process Parameters on Semi-Solid Fluid Field of Aluminum Alloy Coupled Simulation on Temperature Field and Microstructure Formation Process of K4169 Superalloy Blade in Investment Casting Tensile Creep Behavior of Two NiAl-Based Alloys Effect of Divorced Eutectic on the Liquation Crack Susceptibility of Al-Cu Alloy Reaction Hot-Pressed Sintering of Grain-Refined TiB2-TiC Composites by AlN-SiC Solid Solution The Heterogeneity of Composition and Microstructure in Cast Large Sized 3104 Alloy Slab Effect of Initial Texture on the Development of Microstructure and Mechanical Properties in AZ31 Magnesium Alloy after Rolling at 300 DegreesC Influence of Jacket and Filling Materials Characteristics on PELE Effects Influences of Ultrasonic Wave on Polycrystalline Alumina Fibers Synthesized Rheological Behavior of Semisolid AlSi6Mg2 Alloy at Transient State Workability of ZK60A Alloy Depending on Microstructure Research on Synthesizing Process under Ultrasound Coupling and Refining Performance of Al-Ti-C Grain Refiner Effect of Alloying Elements on Microstructure, Texture Development, and Mechanical Properties of Magnesium Alloys Block Shear Strength of Single Shear Four-Bolted Connections with Aluminum Alloys - Experiment and Design Strength Comparison Analysis on Fatigue Crack Propagation and Fractography of A7075 Aluminum Alloy Research on Cold-Rolled Bimetal of High-Tin Aluminum Alloy and Steel Effects of Cu and Sb on Corrosion Resistance of ZnAl27 Alloy Chapter 4: Steel Very Long Life Fatigue Behavior of Q345 Bridge Steel The Study on the Precipitation Behavior of the Second Phase Particles for Fine Grain and High Strength IF Steel Microstructure Evolution of Dynamic Recrystallization of 42CrMo Steel during Multi-Stage Forging by FEM The Corrosion Behavior of a Low Carbon Bainite Steel in Simulated Atmosphere Environment Containing Chloride and/or Sulfide The Analysis of Magnesium Compound Desulfurizer and Compound Desulfurizer in PANGANG Effect of Phosphorus on the Mechanical Properties and Microstructure of Interstitial Free Steel Study on the Key Technologies of Direct Reduction for Rotary Hearth Furnace Dealing with Carbon Containing Pellets Study on Utilization Technology of Vanadium Titanium Magnetite Based on the Rotary Hearth Furnace Direct Reduction Process Study on the Lining Erosion of Deep Reduction Electric Arc Furnace in Smelting Metallized Pellets Process Produced by Vanadium Titanium Magnetite Study on Desulphurization Technology in RH Refining for Electric Steel The Application of the High Alumina Composite Slag in Semi-Steelmaking Study on Residual Stress in High-Speed Cutting NAK80 Mold-Steel Ultrasound-Assisted Electrospark Deposition of 3Cr2NiMo Steel Effect of the Strain Rate on Mechanical Properties and Microstructure of High Strength Low Alloy Steel HC340LA A Study on Recrystallization Behavior of Low Carbon Bainitic Steel during Multi-Pass Deformation Calculation of Carbon Diffusion Coefficient in Spheroidal Graphite Cast Iron Effects of Sintering Conditions on Properties of a Warm Compacted Stainless Steel Powder Micromechanical Modelling for Bauschinger Effect of Dual Phase Steel Research on Activities of CaO-SiO2-B2O3 (Al2O3, Fe2O3) Slag System Study on Corrosion Behaviors of the PTA Plant in Halogen EBSD Investigation on the Primary Recrystallization in Warm Rolled Ti-IF Steel GAP-Like Scheduling Model of Byproduct Gas in Iron and Steel Process Effects of B2O3 and CaF2 on Melting Properties of CaO-Based Slags Chapter 5: Polymer Materials Effect of Blowing Agent and Polyethylene Glycol on Cellular Structure and Mechanical Properties of Chloroprene Rubber Evaluation of Mechanical Properties of Polyamide 6(PA6) Filled with Wollastonite and Inorganic Modified Wollastonite Research on Magnetorheological Elastomers Air Spring Based NR/SBR Rubber Research on Electrical Insulating Property of Disk Insulator in High Voltage GIS Insulated Grounding Module The Characterization and Synthesis of Polyaniline Doped by Peroxo-Polytungstic Acid Performance Enhancements of Polysulfone Ultrafiltration Membranes through Blending with Functionalized Carbon Nanotubes and Polyaniline Nanofibers Effect of DS on the Structure and Charged Properties of SPSf/PVDF Blend Membranes via Immersion Precipitation Process Synthesis and Characterization of Polyaniline Copolymer Applied Research on Modified Polyacrylonitrile Fiber with Collagen The Comparative Analysis of Wood-Plastic Raw Material to Heat up the Experiment and Simulation of Heat Transfer Process Influence of Diisocyanates on Dynamic Mechanical Properties of Castable Polyurethane Elastomers Study on the Properties of Melt Spinning PAN/MWNTs Composite Fibers Preparation and Properties of Polybenzoxazine/Lignin Alloy Synthesis and Effect of Polycarboxylate Superplasticizer with Two Different Molecular Polyethers as Side Chain Effects of Thixotropic Agent and Storage Time on the Rheological Properties of Epoxy Resin A New Textile Sizing Prepared by the Hemp Core Cellulose Ethers Comparison of the Properties of Akund/Cotton Blended Yarn Produced by Compact Spinning with Pure Cotton Yarn Adhesion Effect Model of a Single Biomimetic Fiber Based on JKR Contact Theory Study on Processing of Cotton / Akund Fibers Blended Yarn Effect of Low Molecular Weight Ethylene Homopolymer on Structure and Properties of Bimodal High Density Polyethylene Study on Magnesium Hydroxide Sulfate Whisker and Organo- Modified MMT on Flame Retarded Liquid Silicone Rubber Application of SLP Method in Rubber Powder Workshop Study on the Structure and the Properties of Akund Fiber The Reseach of the Morphology and Mechanical Properties of PA6/POE-g-MAH/OMMT Ternary Blends Shear Strength of Void Slab with Polystyrene Forms The Influence of Temperature on Toughness of PA6/POE-G-MAH/OMMT Blends The Fluidity and AC Impedance of Polypropylene Composites Filled with Activated Carbon Black AC Electrical Properties of Titanate-Linkcoupled Carbon Black Filled Polypropylene Composites The Effect of Hydrophilic Components of Zinc Based Copolymer on its Self Polishing Behavior Study on the Synthesis of Polyester Type Waterborne Polyurethane and Modifying by Nano-Sized Particles The Effects of Synthesis Conditions on PUF Microcapsule Morphology Chapter 6: Optical/Electronic/Magnetic Materials Effect of Nano-CuO on Luminous Intensity of Pyrotechnics Composite Containing KClO4 and Al Explorative Research on the Magnetostriction of Carbon Black Filled Polypropylene Composites The Synthesis and Morphology Control of High after-Grow Intensity SrAl2O4: Eu, Dy Phosphors The Lithium Doping Effect on (Na0.5K0.5)NbO3 Lead-Free Piezo-Ceramics Structure Stability and Ferroelectric Characteristics Efficiency Inorganic Thin Film Solar Cells with Flexible Substrate The Development of Permanent Strong Magnets and its Application in the Deironing of Kaolin Optical and Dielectric Characteristics of Photoactive Layer Thin Films for Organic Photovoltaic Cells A LED Reflector Design and Research for Uniform Rectangular Illumination The Special Magnetic Transition in FeX/(In2O3)1-X Granular Films Size and Sp2 Fraction Dependence of Energy Gaps in Carbon Dots An Alternative Design of Light Delivery System for Heat-Assisted Magnetic Recording Research on the New Multilayer Composite Lightning Electromagnetic Shielding Materials Synthesis of Diester Based Magnetic Fluid Fluorescence Response of Pyrene/Pyrrole Copolymer to Hg2+ in the Aqueous Solution Photocatalytic Oxidation Thiophene Using Nano-TiO2 Luminescent Properties of Zn2SiO4:Eu3+,Dy3+ Phosphors via Sol-Gel Process Probing the Structure and Visible Light Photocatalytic Mechanism of LaVO4/TiO2 Composite Using XRD, BET, and EPR Effects of Y2O3 and In2O3 on the Electrical Properties of SnO2-Based Varistors Chapter 7: Energy Materials and New Energy Technology The Performance Analysis of LPG as the Vehicle Fuel Study on Influence of Geometric Parameters on DMFC Performance Based on Experiments and CFD Simulations Study on the Preparation and Properties of Li4Ti5O12 Powder The Influences of Catalysts in the Thermal Decomposition of Barium Nitrate as Pyrotechnic Oxidants A Study on PEMFC Faults Diagnosis Based on Wavelet Analysis Experimental Studies on Enriching Vanadium from Vanadium Tailings Carbon-Containing Pellets by EAF Melting Effect of Fenton Reagent on the Thermal Stability of Proton-Exchange Membrane for Fuel Cell Improving the Electrochemical Performance of LiFePO4/C Cathode by Selection of Carbon Source Research of LiFePO4 as Positive Electrode Materials Analysis and Evaluation of Active Based on MnOx-CeO2 Catalysts in Process of Particle Combustion for Diesel Particulate Filter Study on the Harmless Treatment of Valve Regulated Lead-Acid Batteries in Substations MPPT Control of Photovoltaic Cells Based on Dynamic Recurrent Fuzzy Neural Network Modeling of Photovoltaic Cell Based on BP Neural Networks Improved by MEA Chapter 8: Environmental Friendly Materials and Waste Utilization Comparative Analysis of Excess Sludge and Digested Sludge Pyrolysis Characteristics Synthesis of Magnetic Photocatalystic Particles for Bacterial Control A Novel Method for POP Stacking Warpage Soil Pollution Prevention Planning of Poyang Lake Ecological Economic Zone TCF High-Brightness Bleaching NaOH-AQ Pulp of Fast-Growing Poplar with Low Kappa Number Study on Removal of Iron and Manganese from Mine Water by Method of Medicament The Impact of Paper Formation on Printability Mechanism of CeVO4/TiO2 Photocatalytic Degradation of VOCs under Visible Light Irradiation: Electrochemical, Photoluminescence and Active Oxygen Species Study Sol-Gel Synthesis of N-Doped Mesoporous TiO2 with High Crystallinity and High Visible Light Photocatalytic Activity Studies on Phosphate Removal from Aqueous Solution by Honeycomb-Cinder Slag Properties of the Recycled Aggregate Concrete Properties of Municipal Solid Waste Incineration (MSWI) Fly Ash during Heating Process Preparation and Characterization of Diatomite-Based Porous Ceramics Recycle of Trimethyl Chlorosilane from Chlorosilane Waste Synthesis of Cationic Starch Flocculant and Properties A Study on the Strengthened Oxygen Delignification of NaOH-AQ Pulp of Fast Growing Poplar with Low Kappa Number Chapter 8: Environmental Friendly Materials and Waste Utilization Research on the Application of Expanded Perlite Cement Grinding Aids Study on the Concentration Process of Glutamic Supernatant Fluid by Vacuum Membrane Distillation and the Reuse of Product Water Study on the Reclamation Technology of Alkaline Phenol Formaldehyde Resin Bonded Sand Biodegradability of Cellulose Fibers and the Fabrics in Activated Sludge Experimental Research on Hybrid Strategy and Desulfurization for White Mud and Coal Slurry Chapter 9: Biomaterials and Preparation Technology Study on Strategy Improvement of Yeast Transformation Experiment Based on ANP Method Design, Synthesis and Biological Evaluation of Novel Fentanyl Analogues as Agonist of -Opioid Receptor Adhesive Evidence for Gecko-Inspired Biomimetic Fiber: Combination of Experiments and Modeling Research on the Scale Density Extraction Technology of Cashmere and Wool GC-MS Analysis of Petroleum Ether and Butyl Alcohol Extracts of Longan Seeds Electricity Production in Microbial Fuel Cells Using Brush Bio-Anode and Bio-Cathode Made of PAN-Based Carbon Fibers Separation of Curcumine (a Functional Food Colourant Material) from Rhizoma curcuma longae by Aqueous Two-Phase Systems Novel Preparation and Characterization of Calcium-Strontium Hydroxyapatite Crosslinking Characteristics of an Genipin-Fixed Porcine Acellular Dermal Matrix Quantitative Effects of Oxygen Supply on Mycelia Growth and Extracellular Polysaccharide of Ganoderma tsugae Analyze Efficacy of Traditional Chinese Medicine Based on OSC-OPLS-DA Particle Loosening on the Surface of Dense Hydroxyapatite in Water Research on the Relationship between Strength and Chemical Composition of Hemp Fiber Lignocellulosic Microparticles Reconstituted from Legume Straw-1-Butyl-3-Methylimidazolium Chloride-Water Solution Establishment and Analysis of the Fermentation Medium Model of Phellinus igniarius Measurement of Total Phenolics, Antiradical Capacity and Reducing Power of Extracts of Chinese Medicinal Plants Preparation Technology of Nanometer Ceramic Particles Reinforced Metal-Matrix Graded Coating by Laser Multi-Layer Cladding Chapter 10: Thin Films Selective Growth of B-Doped Diamond on Si-Doped Diamond Film Characterization of Antibacterial Film Based on PVA and Clove Oil/ -Cyclodextrin Inclusion Complex Deposition and Application of CVD Diamond Film on the Interior-Hole Surface of Shaped-Wire Drawing Die The Preparation and Properties of Ce0.5Ti0.5O2 Ion Storage Films Facile Deposition of Zirconia Optical Films Based on the Solvothermal Treatment of Zirconyl Nitrate-Water-Methanol System Bridge Action of Double-Deck Films Interface Electrons The Micro-Indentation Detection of Multilayer Structured Transparent Film Based on Dark Field Illumination Synthesis of Lithium Thin Film by Electrodeposition from Ionic Liquid Corrosion Behaviors in Simulated Body Fluid for TiO2 Films Deposited on AZ31 Magnesium Alloys by Magnetron Sputtering A Uniaxial Tensile Method and its Device Design Scheme Based on Single Rotary Drum Applied for Polymer Films Deposition and Characterization of Boron-Doped HFCVD Diamond Films on Ti, SiC, Si and Ta Substrates Preparation and Conductive Properties of Ag Thin Film by DC Magnetron Sputtering Method Structure and Photocatalytic Properties of Fixed Porous TiO2 Composite Film on Steel Prepared by Plasma Electrolytic Oxidation RETRACTED: Study of Parylene-C Thin Film Deposited on Flat Substrates Research on the Influence of N2 Partial Pressure on the Performance of Ti/Al/N Composite Film Chapter 11: Structure Materials and Earthquake Resistant Structures Shear Strength of Atypical Reinforced Concrete Pile by Permanent Uni-Wall System Fresh Concrete Anti-Carbonization and Application of Patching Material in Carbonizing Concrete Structure A Summary of Strength Formation Mechanism of Light Wall Material Effect of Binders on the Properties of Chromia/Alumina Refractory Castables The Influence of Seismic Behavior of Web-Type Column - Transfer Structure Caused by Rigidity Variation of the Transfer Storey The Analysis of a Frame Structure with Additional Shear-Bending Bars under Horizontal Earthquake Action Displacement-Based Seismic Design of Steel Frames Strengthened by Buckling-Restrained Braces Chapter 12: Functional Materials Preparation of Porous Fe-Ni Soft Magnetic Powders by Fe-N Alloys Transformation The Research of Microparticle Filling Agent in Protecting Hydrocarbon Reservoir Technology Influence of Grain Composition and Sintering Temperature on Performance of Silicon Carbide Refractory Material Effect of MnCO3 on ZnO-Pr6O11-Co2O3-Cr2O3 Varistor Ceramics Etching Volume Effect on the Morphology of Silicon Etched by Metal-Assisted Chemical Method The Research of the Bending Crack Resistance Ability of Reinforced Concrete Beam Mixed with Emulsified Asphalt Research on Fire-Resistant Fabric Properties of Basalt Fiber Electric-Rheological Properties of Nanometer Titania Doped with Europium Oxide in Hydroxyl Silicone Oil Effects of Cross-Linking Agents on Synthesis of Heat-Resistant Resin from Ethylene Tar Synthesis and Characterization of Polyaniline Conductive Composite Films Study on the Performance of Woven Basalt Filament Diaphragm Fabric Analysis of the D3O Materials in Baseball Protective Clothing Synthesis of ZnIn2S4 via a Surfactant-Assisted Hydrothermal Method and their Visible Light Photocatalytic Properties of MO Degradation Effect of Doping Nb2O5 on Microstructure and Properties of Piezoelectric Ceramics PSZT Visible Light Photocatalytic Degradation of Reactive Deep Blue K-R by BiOI and BiOCl0.2Br0.1I0.7 Synthesis and Characterization of Thermally Stable B-Doped Polycrystalline Diamond Experimental Investigation on Autoclaved Aerated Concrete Using Palladium-Platinum Tailings Synthesize Boron Doped Diamond Films on Porous Ti Substrates by DC-PCVD Applications of Titanium Dioxide Photocatalytic Technology in Degrading VOC in Cars Use of Finite Element Method in Study of Air Conditioning Clothes Synthesis of a Novel Hexanedioyl Thiourea Resin and its Adsorption Properties for Ag(I) Chapter 13: Surface Engineering/Coatings A Study of Double-Coating of Hot-Dip Aluminizing Effects of Heat Treatment Conditions on the Mechanical Properties of AA 2024 Alloy The Study on Preparation Process Optimization of Ceramic Membrane Layer The Effects of Substrate Negative Bias Voltage on Morphology and Properties Base on Multi-Arc Ion Plating Research on Corrosion Resistance of MWEDM Surface with Different Electrical Parameters Research of a Plasma Arc Metal Surface Strengthening Robot The Investigation on Wear Resistance of Fe-Based Alloy Coating by Argon Arc Cladding Friction and Wear Behavior of CaO-MgO-Al2O3-SiO2 Glass-Ceramics Prepared by Waste Casting Sands Corrosion Characteristic of Double Glow Plasma Hydrogen-Free Carburizing on Titanium Features of Workpiece and Orificed Cathodes in Triple-Cathode Plasma Surface Alloying System CFD Modelling of Cadmium Telluride (CdTe) Thin Film Coating with Inline AP-MOCVD Research on the Tribological Properties of Ni-W Alloy Electric Brush Plating Coatings at Elevated Temperatures Process Optimization of Reaction Nitrogen Arc Welding Cladding TiCN/Fe Metal Ceramic Composite Coating Study on TiAl(CN) Particle Reinforce Composites Coating Prepared by Reaction Nitrogen Arc Welding Cladding Process Research on Transfer Coater with High Precision for Electrodes Machined Surfaces Texture Analysis Based on Hough Transform and Run Length Statistics Wear Resistance of Plasma Surface Copper Infiltrated on 0Cr18Ni9 Stainless Steel Effects of H2O2 on Characteristics of Films Formed on Surface of Ti6Al4V in Electrolyte by Micro-Arc Oxidation Analysis on Residual Stress in TiN Coating with Different Thicknesses A New Surface Reconstruction Algorithm for Noisy 3D Unorganized Points Effect of Multilayer Technology on Surface Properties of Diamond Coated Silicon Carbide with Surface Defects Preparation of Hydroxyapatite Coatings by Anodizing-Electrodeposition on Pure Titanium Effects of C6H8O7 and C3H8O3 in the Na2SiO3 Electrolyte on Characteristics of Coating Formed on ZAlSi12Cu2Mg1 by Micro-Arc Oxidation Optimization of Process Parameters of Ni-TiN-CeO2 Binary Nanocomposite Coatings by Ultrasound-Pulse Electrodeposition Study on the Control System of Vertical Tin-Plating Process for Semi-Flexible Coaxial Cable Tool Deflection Error Regularization and Compensation in End Milling of Contour Surfaces Study on the Microstructure of FeCrAl/Aluminum Bronze Composite Coatings Prepared by Supersonic Electric Arc-Spraying Microstructure and Wear Resistance of Laser Cladding Nano-Al2O3/MCrAlY Composite Graded Coating on TiAl Alloy Microstructure and Wear Properties of Laser Synthesized Composite Coatings on Ti-6Al-4V Investigation on the Interfacial Bonding Strength between Ni-P-W/Al2O3 Composite Coatings and NdFeB Matrix Synthesis and Evaluation of Anionic Gemini Surfactant Optimization of Processing Parameters for Electrolysis and Plasma Polishing Chapter 14: Modelling, Analysis and Simulation Springback Prediction Using the Split-Ring Test Based on a Combined Anisotropic Hardening Model Modeling and Movement Simulation of the Interior Transmission Mechanism of the Hoist Based on ProE Reliability Optimization Design Based on the Blind Number Theory Numerical Simulation of Compressive Experiment for Rock with a Natural Interlayer Finite Element Simulation Analysis of Hydraulic Support Based on Virtual Prototype Technology Numerical Simulation for Cup Shell Deep Drawn by Powder Flexible Cavity Modeling and Simulation of Pharmaceutical Powder Compaction Three-Dimensional Arc Modeling inside Non-Transferred Plasma Torch Influence of Charges Shape on a Closely Air Blast Loading A Study on Stoma Arrangement of Air-Cushion Lamination and Numerical Simulation of the Pressure Field The Refined Theory of Axisymmetric Circular Cylinder in One-Dimensional Hexagonal Quasicrystals Numerical Analysis on Cooling Process of Monocrystal Silicon Rod Manufactured with Czochralski Method Numerical Study on a Drop-on-Demand Micro Droplet Print Head The Simulation on Double Tank Water Level Control Based MATLAB Finite-Element Analysis of Melt Flow in a Vertical Twin-Roll Casting The Simulation Optimization for Job-Shop Scheduling Based on Plant Simulation Using Genetic Algorithm Simulation Analysis for Supercavitation Projectiles Penetrating into Metal Targets The Sensibility of Mold Dilation and Graphite Precipitation for the Simulated Porosity in Ductile Cast Iron Numerical Simulation on Temperature Distributions to Cold Store Research on Dynamic Balance of Linkage Considering the Influence of Elastic Deformation Based on Simulation Hunting Search and Ant Colony Optimization Mechanisms on Modified Simplex Method for Grease Position Parameter Design Heat Treatment Process Optimization Using Hunting Search and Ant Sense on Path of Steepest Ascent Harmonic Analysis on Feed Kinematic Behaviors in Turning of Regular Polygon Section Visualization of Random Particle Packing Model for Resin Concrete Finite Element Analysis of Friction Effect on Deformation Behavior of Copper Rods in a Modified C2S2 Process The Model and Simulation of SMT Production Establishment of an ANSYS-Based Constitutive Modeling for Age Forming of Aluminum Alloy Optimisation of Manufacturing Process Models via Intelligent Water Drop Algorithm Modeling Flow Stress and Microstructural Development during Hot Working The Pressure Distribution around Particles in Fluid in Confined Wedge Space Effects of the Flow Speed on Dendritic Growth in Phase-Field Simulation of Binary Alloy with Convection Process Parameters Modeling and Optimizing for Compound Machining with Ultrasonic Vibration on SiC Wafer A Prediction Model of Deflection of Fixing Thin Parts Simulation of the Wind Field of Gantry Cranes Based on FLUENT Parameter Identification Model with the Control Term in Batch Anaerobic Fermentation Modeling and Analysis of the Effect of Preloaded Pressing Force on Gap Formation during the Drilling of Double-Layered Material The Research of Drilling Processing Technology Based on Fuzzy Optimization Design Numerical and Experimental Research on the Feasibility for Plasma Arc Forming of Laminated Clad Metal Sheets Containing Defects Establishment and Application of a Mathematic Model of Negative Pressure Equipment Emerging Solutions in Modeling of Asymmetric Threats Regarding the Aeronautical System Modeling and Optimization of Vibration Amplitude in Turning of Ti-6Al-4V Using Response Surface Methodology Chapter 15: Materials Processing Technology Modeling and Optimization of Vibration Amplitude in Turning of Stainless Steel AISI 304 at Various Tool Overhangs Research and Application of Wire Cutting Mold Surface Roughness Inserts Selection for Intermittent Turning of Magnesium Pieces Vibration Drilling the 0Cr18Ni9Ti Stainless Steel Micro-Hole The Effect of Temperature and Strain-Rate Sensitivity on Formability of AA 5754 A Study on DOE Methods for Hydromechanical Deep Drawing Process Parameters Deformation of Serrated Chips Based on Minimum Energy Consumed for High Speed Machining Research Progress of Methods to Improve Fatigue Strength of Welded Structures Finite Element Mesh Model Analysis and Model Information Transform Method in Casting Simulation Process Finite Element Numerical Simulation of Tubing Premium Connection Surface Roughness Predictive Model of UNS A97075 Aluminum Pieces Obtained by Dry Turning Tests Based on the Cutting Forces The Composition Forecasting Research for Cupola Melting Process Study of the Machining Principle and Influencing of ELID Grinding on SiC Simulation and Experimental Analysis of Moulding Processes of Glass Diffractive Optical Elements Preliminary Study on the Rotational Indexing Machining Technology of Straight Bevel Gear Rebound Deformation of Thin Part Caused by Clamping Force in End Milling Experimental Study on the Possibilities to Decrease the Coefficient of Restitution after Impact In Vitro Study on Dental Abrasive Finishing of Restorative Ceramics Using Diamond Burs in Dental Surgery Practice and Analysis of the Technology of Direct-Tapping Study on Microstructure Evolution in GH4169 Alloy Blade during Finish Forging Advance in Chip Breaking Detection System by Monitoring of Cutting Temperature Numerical Investigation of Manufacturability of Various Compound Shapes Using Sheet Hydroforming Process Micro Hole Elliptical Supersonic Boring Quality Research Influence of Technological Parameter for Ramie Yarn Hairiness on Compact Spinning with Suction Groove Design and Performance Assessment of a 5-Axis Ultra-Precision Micro-Milling Machine Rotary Ultrasonic-Assisted Grinding of Ceramic Material Weld Quality Prediction for Resistance Microwelding of Fine Cu Wire Based on the Back-Propagation Neural Network Study on Roller Profile for Cam Forming by Cross Wedge Rolling Structure Design and Experimental Research on Spiral Boring Tool The Effect of Axial Cutting Edge Angle on the Axial Milling Force of Helical Milling The Effect of Welding Materials on 1Cr18Ni9Ti and 2Cr13 Steel Welding Joints Microstructure and Mechanical Properties Temperature Field and Extrusion Load in Needle Piercing Extrusion Process Based on Ingot Billet for Large 7075 Aluminum Alloy Tube Stress Field Simulation of Compound Cast Rollers during Centrifugal Casting Process Simulation and Analysis of Stroke-Controlled Tube Hydroforming by Finite Element Method Effects of Press on Compression Molding Bonded NdFeB Magnets' Quality Research of Fatigue Stress Cracking for Injection Mold Cavity Based on Ansys Workbench Mechanism for Mechanical Properties of the A357 Connection Beam Casting from Solidification Tooth-Leap Shaping Method for Helical Gears Research on Friction Behavior in Tube Hydroforming Process Predictive of Electron Beam Focus Position by Metal Powder Temperature Design of LPDC Process for Thin-Walled Casting Based on Numerical Simulation The Effect of Vibration on the Surface Topography in Micro-Milling Numerical Simulations of the Influence of the Tool Geometric Parameters on Cutting Forces and Temperatures in High-Speed Machining of Ti6Al4V First Principles Calculation on Adsorption of S on Fe(100) with Different Pressure Research on the Molding Technology of Bonded NdFeB Magnets Precision Control Calculation Method and Forming Technology of Aluminum Alloy Base Test Study of Nickel-Base Superalloy 718 Superfine Deep-Hole Drilling Chapter 15: Materials Processing Technology Processing of Grinder Plate with Bone Chips Removal Facilities Based on CAD/CAM Study of Ageing Treatment on Spray Forming Al-Zn-Mg-Cu Alloy The Research on Fatigue of Crankshaft with the Method of Explicit Dynamic The Influence of Longitudinal Magnetic Field on DCEN MAG Welding The Design of X-Ray Testing System of SMT Solder Study of Solid Solution Treatment on Spray Deposited 7A04 Alloy Grinding Performance of Metal-Bonded CBN Wheels with Regular Pores Experimental Study of Ultrasonic Vibration Drilling Ceramic Material Study on the Two-Side Direction Burr in Grinding-Hardening Machine Based on Orthogonal Experimental Method FEM-Based Design and Analysis of a Smart Cutting Tool with Internal Cooling for Cutting Temperature Measurement and Control Experimental Investigation of Mechanical Micro Machining for AL6061-T6 Material Multi-Objective Optimization of the Loading Path in Tube Hydroforming Process Using NCGA Effect of Charge Action on the Annular Molten Metal of Spray Forming Experimental Study on Drying Process of Green Body in Gelcasting of Metal Part Shape Forming of Alumina by Step Pressure-Vacuum Hybrid Slip Casting Comparsion of Foundry Properties of Traditional Foundry Sand and Microspheres The Influence of the Center-to-Center Distance on the Accuracy of the Serration with the New Gear Hob Experimental Evaluation of Surface Roughness in Orthogonal Micro-Milling Processes Transient Liquid Phase Bonding of Aluminum Using Aluminum Base Interlayer under Argon Flux Microstructure of Al-Li Alloy Electron Beam Welding Joint after Post-Weld Heat Treatment Analysis of Thermal Stress during of Twin-Roll Casting of Magnesium Alloy The Technology of Multistage Extrusion for Thin Walled Brass Cylinder The Effect of Strain Field on Texture and Microstructure Evolution in Homogeneously Cold Rolled 93/7 Brass Influence of Inner Cooler on Flow of Molten Steel in Slab Continuous Casting Mold The Simulation and Experimental Analysis of Non-Abrasive Cryogenic Polishing on Metal Cylindrical Surfaces The Effect of Mill Temperature on the Texture and Microstructutre Evolution in Warm Rolled -Brass Numerical Analysis of Liquid Ammonia Storage Tank Welding Stress Numerical Simulation on the Multi-Point Forming of Sail Surfaces under Force-Displacement Separated Control Automatic Segmentation of Pores in Weld Images Based on Transition Region Extraction Effect of Die Angle on Electromagnetic Riveting Interference Study of Bulging-Pressing Compound-Deforming Automobile Axle Housing with a Common Press Prediction on Cutting Heat of the Simulation in NC Lathe Influence of Surface Remelting Process on Corrosion Resistance of Welding Joints for SUS304 Stainless Steel by Electrode Arc Welding Analysis of Microstructure and Micro Mechanical Properties for Weld Joints of 1000MPa Class Steel by Nanoindentation Technique Stress Analysis and Failure Mechanism of H13 Steel Hot-Forging Die for Automobile Engine Crankshaft Key Technologies Research on Color Contour Map of 3D Injection Molding Simulation Results Numerical Simulation of the Effect of Punch Paths on the Quality of Sheet Metal Stretch Forming Numerical Simulation on the Influence of Heated Mold Continuous Casting Process Parameters to Solid-Liquid Interface Minimum Quantity Lubrication (MQL) Using Ranque - Hilsch Vortex Tube (RHVT) for Sustainable Machining Rapid Prototyping of Aerodynamics Research Models Study on Hot Stamping Process of Cannonball Body Semiproduct Based on Numerical Simulation Supply Abrasive System of Premixed Abrasive Jet and Derusting Application Microstructure and Recrystallization Behavior of an as-Extruded PM Nickel-Base Superalloy A Study of Hollow Jet on Spray Forming Numerical Simulation for Technological Parameters of Vibratory Stress Relief in Large Welding Structures The Adaptive Control of Grinding Force of CNC Cam Grinder Based on Neural Network Contribution to Milling of Materials on Ni Base Advances in Theoretical Investigation of Work Hardening for Metal Cutting Analysis of Volumetric Shrinkage and Optimization of Process Parameters in Injection Molding The Sealing Welding of Helium-Filled Hole on Nuclear Fuel Rod Automatic Welding Method and Main Parameters Calculation of Tube Connected Five-Star Feet Effect of Different Contents of CeO2 on Microstructure and Properties of Roller Surface Alloyed by Laser Study on Ausform Finishing Process and Gear Tooth Deformation for Hardened Gears Research on Tool Wear and Compensation Method of Ultrasonic Milling Research Status of High-Pressure Water Jet Incremental Sheet Metal Forming and Research on a New Method of the Straight-Walled Sheet Metal Part Forming Influences of Blank Holding Force on Stamping of Large Ellipsoidal Heads Based on Simulation Investigation of High Cycle and Low Cycle Fatigue Interaction on Fatigue Behavior of Welded Joints Optional Roughing Tool Diameter Sequence Determination for Pocket: Integrated Geometric Characteristics and Processing Rules Adaptive Model to Apply the Upper-Bound Theorem in Plain Strain Forging Finite Element Analysis of Pharmaceutical Tablet Compaction Study on Extending Tool Life of Micro WC Drills by Various Protective Coatings Welding Deformation Controlling for the Truck Rack Girder Experimental Investigation on Cutting Performance of Face Milling Cutter Molding Plano-Convex Lenses Using a through-Hole WC/Co Plate as the Mold Discussing for a Rapid & Flexible Casting Design Method Based on Modeling, Simulation and Rapid Prototype Machine An Optimization Design for Coefficient of Weld Reinforcement in Rapid Prototyping Based on Robotic Pulse MAG Forming Numerical Study of Transverse Impact Response of Single-Lap Adhesively Bonded Joint Finite Element Analysis of the Combined Effect of Strain Hardening and Friction in Elementary Processes of Forging Study on Machining Characteristics of Ultrasonic Vibration Assisted Micro-EDM Study on Thinning of a Boron-Doped Polycrystalline Diamond Wheel-Tool by Micro Rotary W-EDM Approach Analysis of Main Optimization Techniques in Predicting Surface Roughness in Metal Cutting Processes Robust Process Design towards through-Silicon via Quality Improvement Based on Grey-Taguchi Method Investigation of Vibration and Surface Roughness in Micro Milling of PMMA Overviews of the Behavior of Heat Transfer of Soft-Contact Electromagnetic Continuous Casting Mold An Investigation of Heat Affected Zone of Round Steel Rods Welded by Friction Welding Helical Drills Wear during Drilling of a New ELC Austenitic Stainless Steels Development of Mathematical Model for Chip Serration Frequency in Turning of Stainless Steel 304 Using RSM Chapter 16: Laser Processing Technology Femtosecond Laser Micromachining of High Quality Groove on Sapphire Surface Investigation into Indirect Selective Laser Sintering Alumina Ceramic Parts Combined with Cold Isostatic Pressing Variable White-Light Filaments Induced by Femtosecond Laser in PM567-Doped PMMA Simulation of Temperature Field and Thermal Stress Field during Laser Drilling Low-Temperature Polycrystalline Silicon Thin-Film Transistors Enhanced by Diode-Pumped Solid State Green Continuous-Wave Laser Numerical Study on Strengthening Effect of Laser Shot Peening for Wrought Magnesium Alloy Research of Fiber Laser Cladding Technology on Shaft-Parts The Research on the Quality of the Cutting Mouth for Laser Blanking Micro Dimple Fabrication on OFHC Copper by Laser Shock Processing Laser Instant Shaping of Surface Microstructure Based on Function Laser Ablation of Ti-Al Alloy in Vacuum and Air Environments Research and Design of Laser Scribing Robot Based on Surface Matching Effect of Laser Irradiation Parameters on Healing Fatigue Damage for Polycrystalline Copper Film Chapter 17: Mechanical Behavior and Fracture Failure Analysis on Spring of Boiler Drum Safety Valve Mechanical Analyze of Casing Failure with Sand Production in Loose Sandstone Reservoir Crack Propagation and Simulation of Thermal Fatigue Study on Eliminating the Effect of Bending Moment in Torque Measurement Wave Induced Deformation and Stress Responses in HDPE Circular Net Cage: A Numerical Approach Effect of Initial Grain on Mechanical Properties of AZ31 Alloy during Warm Forming Twin-Shear Yield Criterion for V-Notches Brittle Fracture under Mixed Modes Application of the R-Function Theory and Least Square Method for Torsion Problem with H-Shaped Cross-Section Stress Analysis under Cu Bump Bonding Process Test of Metal Material Fracture Toughness by Finite Element Simulation and Moire Interferometry On the Measurement of Roller Skew of Tapered Roller Bearings A Novel Triangle Element Formulation for Static Analysis of Solids Study on Crack Detection System of PC Beam Surface The Prediction of the Mechanical Properties of Gray Cast Iron Based on the Anatomy Experiment of the Engine Cylinder Head Fatigue Strength of Shaft with Diameter Enlarged Partially by Cyclic Bending and Axial Compressive Loading Analytical Procedure for Geometrical Evaluation of Flat Surfaces Formed by Multiple Indentation Processes Mechanical Properties of AlMgB14 Prepared by Field-Activated, Pressure-Assisted Synthesis Process Constitutive Equations for a Model of Nonlocal Plasticity which Complies with a Nonlocal Maximum Plastic Dissipation Principle A Consistent Formulation of Constitutive Relations for a Model of Nonlocal Viscoplasticity Prediction of Surface Fracture of 6061 Al Processed by Equal-Channel Angular Pressing Chapter 18: Tooling Testing and Evaluation of Materials Quality Assessment of Weldable Steel Mark P355NH from Decompression Chamber Construction for Diving Influence of Low-Level Voltage in Pulse ECM on Electrode Wear and Machining Accuracy Effect of GaN Cap Layer on the Electrical Properties of AlGaN/GaN HEMT A Simple and Sensitive Spectrophotometric Method for the Determination of Trace Ruthenium with its Catalytic Effect on the Oxidation of Rhodamine 6G by KBrO3 in Micellar Media Experimental Study on Friction Damping Characteristics of Metallic Materials with Non-Conforming Contact Thermal Deformation in a Static Pressure Dry Gas Seal Wear Resistance of Nano TiN Strengthen High Chromium Cast Iron Probabilistic Safety Factor of Soil Liquefaction Study on Mathematical Model of Radial Runout Error Analysis of Dimensional Accuracy of Spun Parts by Taguchi Approach Evaluation of Residual Stresses in Butt-Welded Joints by Residual Magnetic Field Measurements Parametric Analysis of Shear Behavior of Concrete Beams Reinforced with Continuous FRP Rectangular Spirals A Practical Evaluation Approach to Form Deviation for Surface of Revolution Based on Discrete Point Coordinate Data Influence of the Metal Sheet Parameters on the Results of the Erichsen Test Chapter 19: Thermal Engineering Theory and Applications Temperature Model of an Advanced Artificial Lift Technology--Cyclic Nature Gas Heat Insulation and Geothermal Temperature Heating Technology Unsteady Numerical Simulation and Ground Tests of a Tailplane Electrothermal De-Icing System Induction Heating Furnace Temperature Control Based on the Fuzzy PID Thermal Design and Thermal Analysis of Control Cabinet for Pattern Sewing Machine Prediction of Heat Dissipation Effect by Simulating Radiator Group of Mining Dump-Truck Effect of Processing Parameters on Heat Transfer Performance of the Heat-Pipe Grinding Wheel Analysis of Unsteady State Heat Conduction Performance in Anisotropic Materials Sub-Optimal Control for Nonlinear Heat Equations Numerical Predicts of Flow and Heat Transfer in Joule-Heated Rectangular Pool The Gas Phase Reaction Crystallization Mechanisms of Amorphous SiCN Ceramic Annealed in Vacuum The Two-Scale Finite Element Estimates for Thermoelasticity in Perforated Structure with Boundary Layer Investigation on Numerical Calculation of Thermal Boundary Resistance between Superconducting Magnets Research on Structural Analysis of Steering Based on Thermal-Structure Necessity Analysis of Tundish Heating Technology Application Thermal Analysis and Research of Multi-Chip Component Substrate Based on Different Thermal Conductivity Models Study on Thermal Deformation of Machining Center's Spindle Box Based on ANSYS Design and Fabrication of Micro-Variable Radiator Chapter 20: Detection and Control Technology Design and Manufacturing of a Constant Volume Test Combustion Chamber for Jet and Flame Visualization of CNG Direct Injection Rolling Bearing Fault Diagnosis Based on Blind Source Separation The Application for Underwater Special Monitoring Equipment Based on the PELCO-D Protocol Investigation of Machining Characteristics of Ultrasonic Vibration Assisted ECM A Case of Structural Integrity of Ageing Fighter Aircraft Leveraging on Condition Maintenance Methodology Propagation Characteristic in 2D Phononic Crystals with Bending Linear Defect System of Premixed Abrasive Jet Cleaning and Derusting on Steel Tube Inwall On-Line Detection Distribution Strategy Research of Complex Surface Based on Bayesian Networks Method of Identifying Key Quality Characteristics in Multistage Manufacturing Process Based on PLSR Transformer Fault Diagnosis of Rough-Neural Network Based on MEA Hydrodynamic Noise and Radiated Mechanism of 3D Cavity The Study on the Ultrasonic Testing and Defects in Quantitative Analysis for the Scroll-Type Profile Concurrent Tolerancing Design Based on Time Value of Manufacture-Quality Loss Cost Survey and Analyze the Line Output Characteristics in Inkjet Printing A Directional Multivariate Control Chart for Monitoring Univariate Autocorrelated Processes The Application Research of PIC16F877 in the Pulse Power of WEDM-HS Development of In Situ SAXS Detection System for the Pre-Oxidation and Carbonization of PAN Precursor New Methold on Power Transformer Fault Diagnosis A New Detection Way for Single- Phase to Ground Fault Based on Energy Function Intergral and Wavelet Packets A New Circuit Detection Method and an Anomalous Frequency Recognition Algorithm Pre-Buckling Transverse Free Vibration of an Asymmetrically Supported Euler Beam Subjected to Distributed Follower Forces The Effect of Damper Components on the Performance of Impact Damping The Study of Fault-Diagnosis Method of Reciprocating Compressor Based on Fuzzy Fault Tree Theory Wind Speed Forecasting Based on Variable Weight Combination Model of Neural Network and Grey Model Analysis and Design of PCB Multistage Process Quality Management Information System High-Speed and High-Accuracy Schemes of Coordinate Calculation and End Point Judgment for Elliptic Interpolation A Six-Probe Scanning Method for Guide Rail Straightness Measurement Noise Character of Cooling Tower and Control Discussion The Evaluation about Vibratory Mixing Methods Gear Fault Diagnosis Based on Harmonic Wavelet Packet and BP Neural Network Study on Chip-Breaking Technology for Numerical-Control Varying-Feed Drilling of Deep Hole Research on a Method of Fault Signal Extraction Based on Improved Algorithm The Error Analysis and Detection of A/C Axes Bi-Rotary Milling Head Prediction of Top Coal Caving Ability Based on Support Vector Machine Adaptive Interpolation of Tool Posture Vector in Five-Axis Flank Milling Effect of Structure Parameters on Dynamic Characteristics of Piezoelectric Vibrator in Ultrasonic EDM Processing Improved Atomic Force Microscopic Inspection Process of Liquid Crystal Display Fault Diagnosis of Chemical Process Based on ACO-BP Neural Network Fault Diagnosis for AP1000 Plant Feed Water System Based on the Fault Petri Net Application Study on Automatic Particle Count Technology Used in Fuel Filtration Efficiency Test Multiaperture Connection Method for Three-Dimensional Mesasurement Based on Quaternion The Analysis on Controllability of Angular Ball Bearings with Considering the Installation Errors Application of Copula in Reliability Theory Application of FastICA Algorithm in Wind Turbine Condition Monitoring

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB11013151
• ISBN:
  • 9783037855027
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v. (2788 p.)
• 大きさ: 25 cm
• 件名:
  • FREE : Advanced materials
  • FREE : Process technology
  • FREE : Advanced design
  • FREE : Manufacturing engineering
  • FREE : ADME
• 親書誌ID:
  • BA88918107